1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 01:34:11 +03:00
Commit Graph

68 Commits

Author SHA1 Message Date
Olaf Hering
df89071faa xen: recognize device_model_override
Since Xen 4.2 libxl expects device_model_override="/path" instead of
device_model="/path". Adjust the code to parse this as <emulator>.

While libxl also recognizes device_model_version="", this knob is not
required for libvirt. A runtime detection exists in libvirt to select
either "qemu-xen" or "qemu-xen-traditional".
Since qemu-xen-traditional is marked as supported just for stubdoms
there is no need to handle it.

Test data files with 'device_model' were adjusted to use
'device_model_override' instead.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2020-12-07 15:38:31 -07:00
Jim Fehlig
d4eecbf662 Xen: Improve parsing of PCI addresses in config converter
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.

[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-08-21 08:08:28 -06:00
Cole Robinson
c800e29b87 tests: Add several net model passthrough tests
Examples of passing unknown strings through <interface>
<model type=X/>

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Jim Fehlig
fb0597574d libxl: Add implicit xenbus controller
All Xen domains have a xenbus device. Implicitly add one if not
already explicitly specified in the domain config.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-13 12:06:52 -06:00
Jim Fehlig
076a2b4096 tests: xmconfigtest: add tests for cmdline formating
Commit 656151bf fixed formatting of the <cmdline> element. Perhaps it
would have been noticed and fixed earlier if we had a test. With this
change, all possible cases of formatting <cmdline> from xmconfig are
covered

1. no 'extra=' or 'root=' in xm.cfg
2. 'extra=' but no 'root=' in xm.cfg
3. 'root=' but no 'extra=' in xm.cfg
4. both 'root=' and 'extra=' in xm.cfg

Case 1 is covered by all existing paravirt tests since they have no
'extra=' or 'root='. Case 2 is covered by adding 'extra=' to a few
of the existing paravirt tests. Cases 3 and 4 are covered by new
tests that only test conversion of xm.cfg to xml.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-04 20:59:16 -06:00
Jim Fehlig
cec1022e01 tests: Xen: use qemu-system-i386 for emulator
Many of the old xm and sexpr test files used qemu-dm as the emulator.
Modern Xen systems no longer use the old, forked qemu-dm, instead
preferring the distro provided qemu or an "upstream" qemu that is
built when the Xen tools are built. This qemu is typically installed
in /usr/lib/xen/bin/qemu-system-i386.

The libxl test files already use /usr/lib/xen/bin/qemu-system-i386.
For consistency, change the old test files to use the same emulator

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-04-20 10:41:07 -06:00
Jim Fehlig
dffe584aa4 libxl: add support for memballoon device
All Xen PV and HVM with PV driver support a memory balloon device,
which cannot be disabled through the toolstack. Model the device
in the libxl driver, similar to the recently removed xend-based
driver.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-11 11:47:33 -06:00
Jim Fehlig
8ee83ea875 tests: move xmconfig tests to WITH_LIBXL
In preparation of removing the legacy Xen driver, move the
xmconfig tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert xm config to XML. Requires fixing up the tests to account
for different behavior of Xen vs libxl post parse functions. For
consistency with other Xen config tests, change the <os> arch to
x86_64.

There is some test file fallout due to differences in handling of
default values between xend and libxl.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-09 11:36:17 -06:00
Bob Liu
90e9817e85 xmconfigdata: drop tests for multi serial
xen-xm doesn't support mult serial devices at all, so these tests are
meaningless.

Signed-off-by: Bob Liu <bob.liu@oracle.com>
2016-09-02 12:46:03 -06:00
Philipp Hahn
4fce367188 test: Remove executable permission from Xen xm files
The configuration files are not directly executable as they don't have
as hash-bang line.
2016-06-07 14:06:18 -06:00
Philipp Hahn
f5ee412dc1 xen: test for driver=tap2 sub-type in xen-xm
tap2 only handles 'aio', but not 'raw', which must be explicitly given:

XML:raw needs to be translated to XM:aio for 'tap' and 'tap2' Xen
drivers.
2016-06-07 14:03:13 -06:00
Pavel Hrdina
b33c14b342 graphics: make address attribute for listen type='address' optional
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element.  This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-17 10:41:45 +02:00
Ján Tomko
96b21fb0ec Fix tests to include video ram size
My commit 3e42867 started filling out the video size in post-parse,
but did not adjust the tests.
2016-05-12 14:32:17 +02:00
Ján Tomko
4b35a7155a tests: fix xen-related tests
My commit 6879be4 moved the addition of the implicit video device
from the XML parser to the PostParse function, but did not regenerate
all the tests.
2016-04-12 14:58:43 +02:00
Jim Fehlig
4c9ffc5388 xenconfig: change 'hap' setting to align with Xen behavior
hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-03-21 09:28:17 -06:00
Cole Robinson
4066c73428 domain: add implicit controllers from post parse
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.

Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.

There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
2016-02-19 09:45:23 -05:00
Pavel Hrdina
36785c7e77 device: cleanup input device code
The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Jim Fehlig
5b74103b0b Xen: support maxvcpus in xm and xl config
From: Ian Campbell <ian.campbell@citrix.com>

xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).

xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.

This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.

The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).

Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
2015-12-18 17:52:00 -07:00
Jim Fehlig
9e6d721985 Xen: tests: use latest XEND_CONFIG_VERSION in xm/xl tests
Change all tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
f281926e1d Xen: tests: remove net-ioemu xm config test
Remove the fullvirt-net-ioemu test since explicitly specifying
'type=ioemu' has not been needed in xm/xend for a long time. It is
not used at all in xl/libxl.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
59baedd87f Xen: tests: remove old xm config tests
Remove xm config tests for old xend 3.0.2 config format.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Pavel Hrdina
91a00424db xen: use virDomainDefPostParse for parsing XM/XL/SEXPR cofings
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:21 +01:00
Jim Fehlig
717a92513d xenconfig: move <os> parsing/formating to config-specific files
xl and xm differ a bit in how <os> configuration is represented.
E.g. xl config supports <os><nvram .../></os> via its "bios"
setting.

Move the xenParseOS and xenFormatOS functions from xen_common.c
and copy to xen_xl.c and xen_xm.c so they can be customized for
xm vs xl config.  An unfortunate fallout is reordering of entries
in the test config files.
2015-04-16 16:11:01 -06:00
Marek Marczykowski-Górecki
cd5dc3031f xenconfig: add support for multiple USB devices syntax
In Xen>=4.3, libxl supports new syntax for USB devices:
usbdevice=[ "DEVICE", "DEVICE", ... ]
Add support for that in xenconfig driver. When only one device is
defined, keep using old syntax for backward compatibility.

Adjust tests for changed options order.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
2015-03-13 12:00:49 -06:00
Chunyan Liu
262d913ffc Add tests to xmconfigtest
Add tests to testing HVM default features (pae, acpi, apic)
conversion from xm config to libvirt xml. If no pae|acpi|apic
specified in xm config, after conversion, libvirt xml should
by default include:
 <features>
   <pae/>
   <apic/>
   <acpi/>
 </features>

Signed-off-by: Chunyan Liu <cyliu@suse.com>
2015-01-04 11:10:14 -07:00
Michal Privoznik
68bf13dbef conf: Extend <loader/> and introduce <nvram/>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-10 09:38:07 +02:00
Kiarie Kahurani
f67bf6e9b5 src/xenconfig: wrap common formatting code
Wrap formatting code common to xm and xl in xenFormatConfigCommon
and export it.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-18 20:37:07 -06:00
Li Zhang
bc18373391 conf: Add keyboard input device type
There is no keyboard support currently in libvirt.

For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Osier Yang
d70f2e117a numad: Always output 'placement' of <vcpu>
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
2012-05-08 16:57:37 -06:00
Philipp Hahn
11ec6bd891 Xen: Fix <clock> handling
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
(hgd24f37b31030 from 2007-04-03), which tracks the offset between the
hypervisors clock and the domains RTC, and is persisted by XenD.
In combination with localtime=1 this had a bug until XenD-3.4
(hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
manifests, but at least for me in TZ=Europe/Berlin I see the previous
offset relative to utc being applied to localtime again, which manifests
in an extra hour being added)

XenD implements the following variants for clock/@offset:
- PV domains don't have a RTC → 'localtime' | 'utc'
- <3.1: no managed domains → 'localtime' | 'utc'
- ≥3.1: the offset is tracked for HV → 'variable'
        due to the localtime=1 bug → 'localtime' | 'utc'
- ≥3.4: the offset is tracked for HV → 'variable'

Current libvirtd still thinks XenD only implements <clock offset='utc'/>
and <clock offset='localtime'/>, which is wrong, since the semantic of
'utc' and 'localtime' specifies, that the offset will be reset on
domain-restart, while with 'variable' the offset is kept. (keeping the
offset over "virsh edit" is important, since otherwise the clock might
jump, which confuses certain guest OSs)

xendConfigVersion was last incremented to 4 by the xen-folks for
xen-3.1.0. I know of no way to reliably detect the version of XenD
(user space tools), which may be different from the version of the
hypervisor (kernel) version! Because of this only the change from
'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
behaviour of XenD-3.1 until XenD-3.4.

For backward compatibility with previous versions of libvirt Xen-HV
still accepts 'utc' and 'localtime', but they are returned as 'variable'
on the next read-back from Xend to libvirt, since this is what XenD
implements: The RTC is NOT reset back to the specified time on next
restart, but the previous offset is kept.
This behaviour can be turned off by adding the additional attribute
adjustment='reset', in which case libvirt will report an error instead
of doing the conversion. The attribute can also be used as a shortcut to
offset='variable' with basis='...'.

With these changes, it is also necessary to adjust the xen tests:

"localtime = 0" is always inserted, because otherwise on updates the
value is not changed within XenD.

adjustment='reset' is inserted for all cases, since they're all <
XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
rtc_timeoffset.

Some statements change their order because code was moved around.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2012-04-02 09:33:54 -06:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Laine Stump
ef79fb5b5f conf: add <listen> subelement to domain <graphics> element
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.
2011-07-28 13:46:39 -04:00
Jiri Denemark
c1a98d8825 Fix order of disks and controllers
Commit 2d6adabd53 replaced qsorting disk
and controller devices with inserting them at the right position. That
was to fix unnecessary reordering of devices. However, when parsing
domain XML devices are just taken in the order in which they appear in
the XML since. Use the correct insertion algorithm to honor device
target.
2011-06-01 19:11:58 +02:00
Paolo Bonzini
e547e44cb0 xen: parse and generate hpet item in sxpr
Recent versions of Xen disable the virtual HPET by default.  This is
usually more precise because tick policies are not implemented for
the HPET in Xen.  However, there may be several reasons to control
the HPET manually: 1) to test the emulation; 2) because distros may
provide the knob while leaving the default to "enabled" for compatibility
reasons.

This patch provides support for the hpet item in both sexpr and xm
formats, and translates it to a <timer> element.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-05-10 16:16:55 -06:00
Michal Novotny
3ee7cf6c9b Add support for multiple serial ports into the Xen driver
this is the patch to add support for multiple serial ports to the
libvirt Xen driver. It support both old style (serial = "pty") and
new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.

Written and tested on RHEL-5 Xen dom0 and working as designed but
the Xen version have to have patch for RHBZ #614004 but this patch
is for upstream version of libvirt.

Also, this patch is addressing issue described in RHBZ #670789.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2011-02-25 11:33:27 -07:00
Eric Blake
65532f4558 maint: improve tests distribution
* tests/Makefile.am (EXTRA_DIST): Sort, and add directories.
(SUBDIRS): Drop automake recursion into subdirs.
* tests/commanddata/Makefile.am: Delete.
* tests/confdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am: Likewise.
* tests/xencapsdata/Makefile.am: Likewise.
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
2010-12-17 11:57:11 -07:00
Cole Robinson
21108d37a3 conf: Fix parsing python style triple quotes
An incorrect check broke matching the closing set of quotes. Update
tests to cover this case for XM config files.
2010-11-22 16:37:21 -05:00
Jiri Denemark
f05b0e46eb Fix make check on RHEL-5
The test for <vcpu> element is unrelated to vnc so the easiest fix is to
remove related configuration.
2010-10-20 16:14:18 +02:00
Eric Blake
0fab10e5ed vcpu: improve vcpu support in xen command line
This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.

See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html

This relies on the fact that def->maxvcpus can be at most 32 with xen.

* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
2010-10-19 10:06:45 -06:00
Jiri Denemark
20311a9af8 xen tests: Fix missing "type ioemu" with rhel5-api
The most common cause of errors with rhel5-api turn on was missing
"(type ioemu)" in sexpr or its equivalent in XM configuration file. This
happens because the presence of that part in sexpr (or cfg) depends on
xen version the host is running. Let's avoid it by explicitly specifying
interface model which ensures "type ioemu" will always be emitted.

This patch adds

    <model type='e1000'/>

withing the interface element in all affected xml files. And

    (model 'e1000')

to all corresponding sexpr files with similar fix to cfg files. Such
configuration works regardless on Xen version.
2010-08-24 10:10:16 +02:00
Philipp Hahn
ab8b2bea47 bootloader_args is named bootargs in xen-xm
According to <xen-3.4.3/tools/python/xen/xm/create.py:158>
	gopts.var('bootargs', val='NAME',
			  fn=set_value, default=None,
			  use="Arguments to pass to boot loader")
the "bootloader_args" parameter needs to be translated into "bootargs"
when using "virsh domxml-to-native xen-xm".
The reverse direction (domxml-from-native) is already okay.

This patch fixes domxml-to-native and adds two test files to catch this
problem.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2010-08-09 16:11:25 -06:00
Cole Robinson
6b24755235 domain conf: Track <console> target type
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.

This will be used to differentiate between a serial vs. virtio console for
QEMU.

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-28 16:47:59 -04:00
Eric Blake
fb8552f83a maint: simplify some ignore files
* .hgignore: Delete, no longer used.
* examples/python/.gitignore: Delete, covered globally.
* include/.gitignore: Likewise.
* python/tests/.gitignore: Likewise.
* docs/schemas/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
* tests/sexpr2xmldata/.gitignore: Likewise.
* tests/confdata/.gitignore: Likewise.
* tests/xencapsdata/.gitignore: Likewise.
* tests/xmconfigdata/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
2010-06-15 07:31:10 -06:00
Cole Robinson
953809dbe4 xen: Fix chardev listen sexpr formatting
'listen' isn't a valid qemu-dm option, as reported a long time ago here:

https://bugzilla.redhat.com/show_bug.cgi?id=492958

Matches the near identical logic in qemu_conf.c

v2: When parsing sexpr, only match on ",server", rather than
    full ',server,nowait'.
2010-05-27 14:26:05 -04:00
Jim Meyering
083b901eb3 build: avoid non-srcdir "make distcheck" failures (srcdir vs wildcard)
* tests/xencapsdata/Makefile.am: Use $(wildcard in $(srcdir)-aware manner
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am (EXTRA_DIST): Likewise.
* Makefile.am (XML_EXAMPLES): Use $(wildcard in $(srcdir)-aware manner.
2010-02-25 10:50:18 +01:00
Jiri Denemark
81ea6e4d9f Tests for interface type/model configuration
add a set of tests for Xen interface type and model configurations
2009-12-04 17:01:34 +01:00
Jim Meyering
fb98f4b10d remove all .cvsignore files 2009-07-08 16:17:51 +02:00
Daniel P. Berrange
1fbee8dadf Fix XM driver VIF config creation 2009-04-24 12:17:50 +00:00
Daniel P. Berrange
e4073623a6 Support PCI passthrough for Xen 2009-04-03 12:38:52 +00:00
Daniel P. Berrange
83a618f807 Add support for vifname= in XM config files 2009-04-01 10:16:05 +00:00