1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 21:34:54 +03:00
Commit Graph

371 Commits

Author SHA1 Message Date
John Ferlan
f632e017c0 conf: Introduce storage_adapter_conf
Move code from storage_conf into storage_adapter_conf

Pure code motion

Signed-off-by: John Ferlan <jferlan@redhat.com>
2017-03-15 21:17:47 -04:00
Fabian Freyer
04664327c6 bhyve: add video support
bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:

 - Introducr 'gop' video device type
 - Add capabilities probing for the 'fbuf' device that's
   responsible for graphics
 - Update command builder routines to let users configure
   domain's VNC via gop graphics.

Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
2017-03-11 23:30:56 +04:00
Roman Bogorodskiy
321ff4087c virt-host-validate: add bhyve support
Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.

It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.

Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
2017-03-11 21:22:58 +04:00
John Ferlan
079747a36d conf: Introduce virnwfilterobj
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf

Purely code motion at this point, plus adjustments to cleanly build.
2017-03-07 13:27:25 -05:00
John Ferlan
eabeff8ea3 conf: Introduce virinterfaceobj
Move all the InterfaceObj API's into their own module virinterfaceobj
from the interface_conf

Purely code motion at this point.
2017-03-06 07:07:01 -05:00
John Ferlan
bc20200e53 conf: Introduce virnodedeviceobj
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf

Purely code motion at this point, plus adjustments to cleanly build.
2017-03-03 18:36:09 -05:00
John Ferlan
03346def06 util: Move scsi_host specific functions from virutil
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.

Take the opporunity to also change the function names and in one case
the parameters slightly
2017-02-19 06:45:09 -05:00
John Ferlan
16416816c1 util: Create a new virvhba module and move/rename API's
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.

Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.

While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
2017-02-19 06:45:09 -05:00
Roman Bogorodskiy
803966c76d bhyve: fix SATA address allocation
As bhyve for a long time didn't have a notion of the explicit SATA
controller and created a controller for each drive, the bhyve driver
in libvirt acted in a similar way and didn't care about the SATA
controllers and assigned PCI addresses to drives directly, as
the generated command will look like this anyway:

 2:0,ahci-hd,somedisk.img

This no longer makes sense because:

 1. After commit c07d1c1c4f it's not possible to assign
    PCI addresses to disks
 2. Bhyve now supports multiple disk drives for a controller,
    so it's going away from 1:1 controller:disk mapping, so
    the controller object starts to make more sense now

So, this patch does the following:

 - Assign PCI address to SATA controllers (previously we didn't do this)
 - Assign disk addresses instead of PCI addresses for disks. Now, when
   building a bhyve command, we take PCI address not from the disk
   itself but from its controller
 - Assign addresses at XML parsing time using the
   assignAddressesCallback. This is done mainly for being able to
   verify address allocation via xml2xml tests
 - Adjust existing bhyvexml2{xml,argv} tests to chase the new
   address allocation

This patch is largely based on work of Fabian Freyer.
2017-01-30 20:48:42 +04:00
Olga Krishtal
479a2f16f1 storage: Introduce Virtuozzo vstorage pool and volume APIs
Added create/define/etc pool operations for vstorage backend.

Used the common/local pool API's from storage_util for operations
that are not specific to vstorage. In particular Refresh and Delete
Pool operations as well as all the Volume operations.

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
2017-01-26 10:43:42 -05:00
Peter Krempa
46e8049c15 storage: Split utility functions from storage_backend.(ch)
The file became a garbage dump for all kinds of utility functions over
time. Move them to a separate file so that the files can become a clean
interface for the storage backends.
2017-01-19 09:25:51 +01:00
Jason J. Herne
79d72011ee s390: Cpu driver support for update and compare
Implement compare for s390. Required to test the guest against the host for
guest cpu model runnability checking. We always return IDENTICAL to bypass
Libvirt's checking. s390 will rely on Qemu to perform the runnability checking.

Implement update for s390. required to support use of cpu "host-model" mode.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Jiri Denemark <jdenemar@redhat.com>
2017-01-06 12:24:56 +01:00
Mehdi Abaakouk
e0d893e86d Move virstat.c code to virnetdevtap.c
This is just a code move of virstat.c to virnetdevtap.c
2016-12-09 10:28:07 +01:00
Michal Privoznik
86980bc75c util: Introduce virMACMap module
This module will be used to track:

  <domain, mac address list>

pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-12-06 13:33:18 +01:00
Eric Farman
629544be0f util: Management routines for scsi_host devices
For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests.  Provide the basic infrastructure
for these tasks.

The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
2016-11-24 12:15:26 -05:00
Pino Toscano
6917467c2b libssh_transport: add new libssh-based transport
Implement a new libssh transport, which uses libssh to communicate with
remote hosts, and add all the build system stuff (search of libssh,
private symbols, etc) to built it.

This new transport supports all the common ssh authentication methods,
making use of libvirt's auth callbacks for interaction with the user.
2016-11-15 15:50:51 +01:00
Erik Skultety
7cea74a3b2 datatypes: Introduce some admin-related close callback handling helpers
Well, there were three different spots where closeCallback->freeCallback was
called, not looking the same --> potential for bugs - and there indeed is a bug
with refcounting of the @conn object. So this patch partially follows the path
set by commit 24dbb69f by introducing some close callback helpers both to
replace all the spots where we call clean the close callback data with a
dedicated function and to be able to fix the refcounting bug causing a memleak.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-11-14 10:18:56 +01:00
Jiri Denemark
3b6be3c0c5 cpu: Rework cpuUpdate
The reworked API is now called virCPUUpdate and it should change the
provided CPU definition into a one which can be consumed by the QEMU
command line builder:

    - host-passthrough remains unchanged
    - host-model is turned into custom CPU with a model and features
      copied from host
    - custom CPU with minimum match is converted similarly to host-model
    - optional features are updated according to host's CPU

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:09 +02:00
Jovanka Gulicoska
fcabc1ca53 Introduce node device lifecycle event APIs
Node device lifecycle event API entry points for registering and
deregistering node deivce events, as well as types of events
associated with node device.
These entry points will be used for implementing asynchronous
lifecycle events.

Node device API:
virConnectNodeDeviceEventRegisterAny
virConnectNodeDeviceEventDeregisterAny
virNodeDeviceEventLifecycleType which has events CREATED and DELETED
2016-08-02 09:52:00 -04:00
Daniel P. Berrange
46dbc97e65 virtlogd: convert to typedef virConf accessors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-12 09:58:21 +01:00
Daniel P. Berrange
2666b2905f virtlockd: convert to typesafe virConf accessors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-12 09:58:21 +01:00
Fabian Freyer
01163b1b1f bhyve: implement virConnectDomainXMLFromNative
First, remove escaped newlines and split up the string into an argv-list for
the bhyve and loader commands, respectively. This is done by iterating over the
string splitting it by newlines, and then re-iterating over each line,
splitting it by spaces.

Since this code reuses part of the code of qemu_parse_command.c
(in bhyveCommandLine2argv), add the appropriate copyright notices.

Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
2016-07-10 15:40:10 -04:00
Fabian Freyer
b436a8ae5c gnulib: add getopt module
Unconditionally use gnulib's getopt module. This is needed by the bhyve driver
to provide a reentrant interface for getopt.

Several gnulib headers rely on features.h being included by ctype.h to provide
__GNUC_PREREQ, but on systems without glibc, this is not provided. In these
cases __GNUC_PREREQ gets redefined to 0, which causes build errors from checks
in src/internal.h.
Therefore, define __GNUC_PREREQ as early as possible. config-post.h is probably
the first header that is included, before any other headers.
2016-07-10 15:39:44 -04:00
Jiri Denemark
3e5197ac13 cpu: Drop generic driver
Pretending (partial) support for something we don't understand is risky.
Reporting a failure is much better.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-07-01 12:20:54 +02:00
Laine Stump
cf0568b0af util: new files virnetdevip.[ch] for IP-related netdev functions
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
2016-06-26 19:33:09 -04:00
John Ferlan
ecd45ced0e util: Move and rename virStorageAuthDefParseSecret
Move to virsecret.c and rename to virSecretLookupParseSecret. Also convert
to usage xmlNodePtr and virXMLPropString rather than virXPathString.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-06-23 12:30:28 -04:00
Jim Fehlig
cb110a67e3 libxl: introduce libxl_capabilities.{ch}
Move capabilities code out of libxl_conf.{ch} and into new
libxl_capabilities.{ch} files.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-06-13 14:13:16 -06:00
Jim Fehlig
fda5a98e9e driver config: Introduce virFirmware object
The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.

To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-06-13 14:13:16 -06:00
Daniel P. Berrange
86dd9fac0f nodeinfo: move host memory APIs out into virhostmem file
Move all APIs with a virHostMEM name prefix out into new
util/virhostmem.h & util/virhostmem.c files

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-09 18:43:18 +01:00
Daniel P. Berrange
eaf18f4c2b nodeinfo: move host CPU APIs out into virhostcpu.c file
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-09 18:31:11 +01:00
John Ferlan
1b5f1884a2 qemu: Move and rename qemuBuildObjectCommandlineFromJSON
Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.

This API will then be shareable with qemu-img and the need to build
a security object for luks support.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-06-06 13:44:51 -04:00
Peter Krempa
1d632c3924 secret: util: Refactor virSecretGetSecretString
Call the internal driver callbacks rather than the public APIs to avoid
calling unnecessarily the error dispatching code and don't overwrite
the error messages provided by the APIs. They are good enough to
describe which secret is missing either by UUID or the usage (basically
name).
2016-05-16 12:58:48 +02:00
John Ferlan
d4287b985c secret: Introduce virSecretObjListAdd* and virSecretObjListRemove
Add the functions to add/remove elements from the hashed secret obj list.
These will replace secret_driver functions secretAssignDef and secretObjRemove.

The virSecretObjListAddLocked will perform the necessary lookups and
decide whether to replace an existing hash entry or create a new one.
This includes setting up the configPath and base64Path as well as being
able to support the caller's need to restore from a previous definition
in case something goes wrong in the caller.
2016-04-25 15:45:29 -04:00
Erik Skultety
caa16d3168 admin: Introduce virAdmServerGethreadPoolParameters
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-18 17:07:36 +02:00
Erik Skultety
7968517593 util: Report system error when virThreadCreateFull fails
Otherwise 'Unknown' error will be returned to client.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-18 17:06:54 +02:00
Erik Skultety
799ced1f80 po: Really fix po/POTFILES.in ordering
Commit e72667bd tried to fix the incorrect file ordering in po/POTFILES.in
except it didn't, since the sort was run using locale en_US instead of
using locale C which is the default in libvirt. So this patch hopefully fixes
it for good.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-10 19:35:59 +02:00
Erik Skultety
e72667bddf po: fix POTFILES.in file ordering
When it comes to a situation that a new translatable file needs to be added
into the list of files, an automatically generated patch is proposed during
syntax-check. However, the diff was made against a sorted list of files and
the same sorted list of files + the new file that actually needs to be added
into the list. Since we do not keep POTFILES sorted, the proposed patch thus
can't be applied...most of the time - depending on the context.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-10 10:43:56 +02:00
John Ferlan
2844de6f40 secret: Introduce virSecretGetSecretString
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString.  Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.

Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
2016-04-06 20:31:21 -04:00
Qiaowei Ren
28b446292b perf: implement a set of util functions for perf event
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Michal Privoznik
fd9514f8d2 Export virLease* functions for leases file handling
These functions are going to be reused very shortly. So instead
of duplicating the code, lets move them into utils module.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-18 17:29:53 +01:00
Erik Skultety
0b231195cb virlog: Refactor virLogParseOutputs
The problem with the original virLogParseOutputs method was that the way it
parsed the input, walking the string char by char and using absolute jumps
depending on the virLogDestination type, was rather complicated to read.
This patch utilizes virStringSplit method twice, first time to filter out any
spaces and split the input to individual log outputs and then for each
individual output to tokenize it by to the parts according to our
PRIORITY:DESTINATION?(:DATA) format. Also, to STREQLEN for matching destination
was replaced with virDestinationTypeFromString call.
2016-03-16 14:28:24 +01:00
Martin Kletzander
d949280c72 admin: Generate ConnectListServers dispatch helpers
Since we have the opportunity now, let's save some precious code lines.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-11 12:58:41 +01:00
Erik Skultety
1a07c2efb3 admin: Introduce adminDaemonConnectListServers API
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-17 12:46:34 +01:00
Erik Skultety
159a37f659 admin: Move admin_server.{h,c} to admin.{h,c}
This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.

Best viewed with -M.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-17 12:46:34 +01:00
John Ferlan
de71e0e500 qemu: Move qemuAssign*Alias* API's into their own module
Create a new module qemu_alias.c to handle the qemuAssign*Alias* APIs
and the qemuDomainDeviceAliasIndex
2016-02-16 11:07:48 -05:00
John Ferlan
177db48734 qemu: Move qemuDomain*Address* functions
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.

Make qemuDomainSupportsPCI non static.

Also, move and rename the following:

qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-16 11:07:47 -05:00
John Ferlan
a1a1e44798 qemu: Move qemuNetworkIfaceConnect to qemu_interface.c and rename
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.

Rename function to qemuInterfaceBridgeConnect and modify callers.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-16 11:07:47 -05:00
John Ferlan
d860b2f537 qemu: Split the command parsing routines into own module
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.

Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.

Narrowed down the list of #include's in the split out module to
those that are necessary for build.
2016-02-10 15:21:37 -05:00
Michal Privoznik
90f3c0d717 conf: Split virDomainObjList into a separate file
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-11-30 13:55:10 +01:00
Erik Skultety
a474371fc6 admin: Introduce virAdmConnectGetLibVersion
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
2015-11-30 09:44:28 +01:00