1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 01:34:11 +03:00
libvirt/tests/networkxml2xmlout/nat-network-mtu.xml
Casey Callendrello 682be11505 network: set mtu as a DHCP option when specified
This adds an additional directive to the dnsmasq configuration file that
notifies clients via dhcp about the link's MTU. Guests can then choose
adjust their link accordingly.

Signed-off-by: Casey Callendrello <cdc@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-01-31 17:45:41 +01:00

25 lines
813 B
XML

<network>
<name>default</name>
<uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid>
<forward dev='eth1' mode='nat'>
<interface dev='eth1'/>
</forward>
<bridge name='virbr0' stp='on' delay='0'/>
<mtu size='7000'/>
<ip address='192.168.122.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.122.2' end='192.168.122.254'/>
<host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10'/>
<host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11'/>
</dhcp>
</ip>
<ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'>
</ip>
<ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'>
</ip>
<ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'>
</ip>
<ip family='ipv4' address='10.24.10.1'>
</ip>
</network>