devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
/*
* Copyright ( C ) 2011 Red Hat , Inc . All rights reserved .
*
* This file is part of LVM2 .
*
* This copyrighted material is made available to anyone wishing to use ,
* modify , copy , or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v .2 .1 .
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program ; if not , write to the Free Software Foundation ,
* Inc . , 51 Franklin Street , Fifth Floor , Boston , MA 02110 - 1301 USA
*/
# include "base/memory/zalloc.h"
# include "lib/misc/lib.h"
# include "lib/activate/activate.h"
# include "lib/commands/toolcontext.h"
# include "lib/device/device_id.h"
2022-04-21 21:45:01 +03:00
# include "lib/datastruct/str_list.h"
2024-05-29 23:43:11 +03:00
# include "device_mapper/misc/dm-ioctl.h"
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
# ifdef UDEV_SYNC_SUPPORT
# include <libudev.h>
# include "lib/device/dev-ext-udev-constants.h"
# endif
# include <dirent.h>
2022-04-21 21:45:01 +03:00
# include <ctype.h>
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
# define MPATH_PREFIX "mpath-"
/*
* This hash table keeps track of whether a given dm device
* is a mpath device or not .
*
* If dm - 3 is an mpath device , then the constant " 2 " is stored in
* the hash table with the key of the dm minor number ( " 3 " for dm - 3 ) .
* If dm - 3 is not an mpath device , then the constant " 1 " is stored in
* the hash table with the key of the dm minor number .
*/
2022-04-21 21:45:01 +03:00
static struct dm_pool * _wwid_mem ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
static struct dm_hash_table * _minor_hash_tab ;
static struct dm_hash_table * _wwid_hash_tab ;
2022-04-21 21:45:01 +03:00
static struct dm_list _ignored ;
static struct dm_list _ignored_exceptions ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
# define MAX_WWID_LINE 512
2022-04-21 21:45:01 +03:00
static void _read_blacklist_file ( const char * path )
{
FILE * fp ;
char line [ MAX_WWID_LINE ] ;
char wwid [ MAX_WWID_LINE ] ;
2023-04-26 17:32:23 +03:00
char * word ;
2022-04-21 21:45:01 +03:00
int section_black = 0 ;
int section_exceptions = 0 ;
int found_quote ;
2022-06-06 19:39:02 +03:00
int found_type ;
2022-04-21 21:45:01 +03:00
int i , j ;
if ( ! ( fp = fopen ( path , " r " ) ) )
return ;
while ( fgets ( line , sizeof ( line ) , fp ) ) {
word = NULL ;
/* skip initial white space on the line */
for ( i = 0 ; i < MAX_WWID_LINE ; i + + ) {
if ( ( line [ i ] = = ' \n ' ) | | ( line [ i ] = = ' \0 ' ) )
break ;
if ( isspace ( line [ i ] ) )
continue ;
word = & line [ i ] ;
break ;
}
if ( ! word | | word [ 0 ] = = ' # ' )
continue ;
/* identify the start of the section we want to read */
if ( strchr ( word , ' { ' ) ) {
if ( ! strncmp ( word , " blacklist_exceptions " , 20 ) )
section_exceptions = 1 ;
else if ( ! strncmp ( word , " blacklist " , 9 ) )
section_black = 1 ;
continue ;
}
/* identify the end of the section we've been reading */
if ( strchr ( word , ' } ' ) ) {
section_exceptions = 0 ;
section_black = 0 ;
continue ;
}
/* skip lines that are not in a section we want */
if ( ! section_black & & ! section_exceptions )
continue ;
/*
* read a wwid from the blacklist { _exceptions } section .
* does not recognize other non - wwid entries in the
* section , and skips those ( should the entire mp
* config filtering be disabled if non - wwids are seen ?
*/
2023-04-26 17:32:23 +03:00
if ( ! strstr ( word , " wwid " ) )
2022-04-21 21:45:01 +03:00
continue ;
i + = 4 ; /* skip "wwid" */
/*
* copy wwid value from the line .
* the wwids copied here need to match the
* wwids read from / etc / multipath / wwids ,
* which are matched to wwids from sysfs .
*/
memset ( wwid , 0 , sizeof ( wwid ) ) ;
found_quote = 0 ;
2022-06-06 19:39:02 +03:00
found_type = 0 ;
2022-04-21 21:45:01 +03:00
j = 0 ;
for ( ; i < MAX_WWID_LINE ; i + + ) {
if ( ( line [ i ] = = ' \n ' ) | | ( line [ i ] = = ' \0 ' ) )
break ;
if ( ! j & & isspace ( line [ i ] ) )
continue ;
if ( isspace ( line [ i ] ) )
break ;
/* quotes around wwid are optional */
if ( ( line [ i ] = = ' " ' ) & & ! found_quote ) {
found_quote = 1 ;
continue ;
}
/* second quote is end of wwid */
if ( ( line [ i ] = = ' " ' ) & & found_quote )
break ;
2022-06-06 19:39:02 +03:00
/* exclude initial 3/2/1 for naa/eui/t10 */
if ( ! j & & ! found_type & &
( ( line [ i ] = = ' 3 ' ) | | ( line [ i ] = = ' 2 ' ) | | ( line [ i ] = = ' 1 ' ) ) ) {
found_type = 1 ;
2022-04-21 21:45:01 +03:00
continue ;
}
wwid [ j ] = line [ i ] ;
j + + ;
}
if ( j < 8 )
continue ;
log_debug ( " multipath wwid %s in %s %s " ,
wwid , section_exceptions ? " blacklist_exceptions " : " blacklist " , path ) ;
if ( section_exceptions ) {
if ( ! str_list_add ( _wwid_mem , & _ignored_exceptions , dm_pool_strdup ( _wwid_mem , wwid ) ) )
stack ;
} else {
if ( ! str_list_add ( _wwid_mem , & _ignored , dm_pool_strdup ( _wwid_mem , wwid ) ) )
stack ;
}
}
if ( fclose ( fp ) )
stack ;
}
static void _read_wwid_exclusions ( void )
{
2023-08-31 19:47:42 +03:00
static const char _mpath_conf [ ] = " /etc/multipath/conf.d " ;
2022-04-21 21:45:01 +03:00
char path [ PATH_MAX ] = { 0 } ;
DIR * dir ;
struct dirent * de ;
struct dm_str_list * sl , * sl2 ;
int rem_count = 0 ;
_read_blacklist_file ( " /etc/multipath.conf " ) ;
2023-08-31 19:47:42 +03:00
if ( ( dir = opendir ( _mpath_conf ) ) ) {
2022-04-21 21:45:01 +03:00
while ( ( de = readdir ( dir ) ) ) {
if ( de - > d_name [ 0 ] = = ' . ' )
continue ;
2023-08-31 19:47:42 +03:00
snprintf ( path , sizeof ( path ) , " %s/%s " , _mpath_conf , de - > d_name ) ;
2022-04-21 21:45:01 +03:00
_read_blacklist_file ( path ) ;
}
2023-08-31 19:47:42 +03:00
if ( closedir ( dir ) )
log_sys_debug ( " closedir " , _mpath_conf ) ;
2022-04-21 21:45:01 +03:00
}
/* for each wwid in ignored_exceptions, remove it from ignored */
dm_list_iterate_items_safe ( sl , sl2 , & _ignored ) {
if ( str_list_match_item ( & _ignored_exceptions , sl - > str ) )
str_list_del ( & _ignored , sl - > str ) ;
}
/* for each wwid in ignored, remove it from wwid_hash */
dm_list_iterate_items ( sl , & _ignored ) {
dm_hash_remove_binary ( _wwid_hash_tab , sl - > str , strlen ( sl - > str ) ) ;
rem_count + + ;
}
if ( rem_count )
log_debug ( " multipath config ignored %d wwids " , rem_count ) ;
}
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2022-06-06 22:04:20 +03:00
static void _read_wwid_file ( const char * config_wwids_file , int * entries )
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
{
FILE * fp ;
char line [ MAX_WWID_LINE ] ;
char * wwid , * p ;
2022-06-06 22:04:20 +03:00
char typestr [ 2 ] = { 0 } ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
int count = 0 ;
if ( config_wwids_file [ 0 ] ! = ' / ' ) {
2023-04-26 15:40:11 +03:00
log_print_unless_silent ( " Ignoring unknown multipath_wwids_file. " ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return ;
}
if ( ! ( fp = fopen ( config_wwids_file , " r " ) ) ) {
log_debug ( " multipath wwids file not found " ) ;
return ;
}
while ( fgets ( line , sizeof ( line ) , fp ) ) {
if ( line [ 0 ] = = ' # ' )
continue ;
wwid = line ;
if ( line [ 0 ] = = ' / ' )
wwid + + ;
2022-06-06 22:04:20 +03:00
/*
* the initial character is the id type ,
* 1 is t10 , 2 is eui , 3 is naa , 8 is scsi name .
2024-08-30 00:05:41 +03:00
* wwids are stored in the hash table without the type character .
2022-06-06 22:04:20 +03:00
* It seems that sometimes multipath does not include
2024-08-30 00:05:41 +03:00
* the type character ( seen with t10 scsi_debug devs ) .
2022-06-06 22:04:20 +03:00
*/
typestr [ 0 ] = * wwid ;
if ( typestr [ 0 ] = = ' 1 ' | | typestr [ 0 ] = = ' 2 ' | | typestr [ 0 ] = = ' 3 ' )
wwid + + ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if ( ( p = strchr ( wwid , ' / ' ) ) )
* p = ' \0 ' ;
( void ) dm_hash_insert_binary ( _wwid_hash_tab , wwid , strlen ( wwid ) , ( void * ) 1 ) ;
count + + ;
}
if ( fclose ( fp ) )
stack ;
log_debug ( " multipath wwids read %d from %s " , count , config_wwids_file ) ;
2022-06-06 22:04:20 +03:00
* entries = count ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
int dev_mpath_init ( const char * config_wwids_file )
{
struct dm_pool * mem ;
struct dm_hash_table * minor_tab ;
struct dm_hash_table * wwid_tab ;
2022-06-06 22:04:20 +03:00
int entries = 0 ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2022-04-21 21:45:01 +03:00
dm_list_init ( & _ignored ) ;
dm_list_init ( & _ignored_exceptions ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if ( ! ( mem = dm_pool_create ( " mpath " , 256 ) ) ) {
log_error ( " mpath pool creation failed. " ) ;
return 0 ;
}
if ( ! ( minor_tab = dm_hash_create ( 110 ) ) ) {
log_error ( " mpath hash table creation failed. " ) ;
dm_pool_destroy ( mem ) ;
return 0 ;
}
2022-04-21 21:45:01 +03:00
_wwid_mem = mem ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
_minor_hash_tab = minor_tab ;
/* multipath_wwids_file="" disables the use of the file */
if ( config_wwids_file & & ! strlen ( config_wwids_file ) ) {
log_debug ( " multipath wwids file disabled. " ) ;
return 1 ;
}
if ( ! ( wwid_tab = dm_hash_create ( 110 ) ) ) {
log_error ( " mpath hash table creation failed. " ) ;
dm_hash_destroy ( _minor_hash_tab ) ;
2022-04-21 21:45:01 +03:00
dm_pool_destroy ( _wwid_mem ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
_minor_hash_tab = NULL ;
2022-04-21 21:45:01 +03:00
_wwid_mem = NULL ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 0 ;
}
_wwid_hash_tab = wwid_tab ;
2022-04-21 21:45:01 +03:00
if ( config_wwids_file ) {
2022-06-06 22:04:20 +03:00
_read_wwid_file ( config_wwids_file , & entries ) ;
2022-04-21 21:45:01 +03:00
_read_wwid_exclusions ( ) ;
}
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2022-06-06 22:04:20 +03:00
if ( ! entries ) {
/* reading dev wwids is skipped with null wwid_hash_tab */
dm_hash_destroy ( _wwid_hash_tab ) ;
_wwid_hash_tab = NULL ;
}
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 1 ;
}
void dev_mpath_exit ( void )
{
if ( _minor_hash_tab )
dm_hash_destroy ( _minor_hash_tab ) ;
if ( _wwid_hash_tab )
dm_hash_destroy ( _wwid_hash_tab ) ;
2022-04-21 21:45:01 +03:00
if ( _wwid_mem )
dm_pool_destroy ( _wwid_mem ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
_minor_hash_tab = NULL ;
_wwid_hash_tab = NULL ;
2022-04-21 21:45:01 +03:00
_wwid_mem = NULL ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
/*
* given " /dev/foo " return " foo "
*/
static const char * _get_sysfs_name ( struct device * dev )
{
const char * name ;
if ( ! ( name = strrchr ( dev_name ( dev ) , ' / ' ) ) ) {
log_error ( " Cannot find '/' in device name. " ) ;
return NULL ;
}
name + + ;
if ( ! * name ) {
log_error ( " Device name is not valid. " ) ;
return NULL ;
}
return name ;
}
/*
* given major : minor
* readlink translates / sys / dev / block / major : minor to / sys / . . . / foo
* from / sys / . . . / foo return " foo "
*/
static const char * _get_sysfs_name_by_devt ( const char * sysfs_dir , dev_t devno ,
char * buf , size_t buf_size )
{
const char * name ;
char path [ PATH_MAX ] ;
int size ;
2024-05-28 17:17:53 +03:00
if ( dm_snprintf ( path , sizeof ( path ) , " %sdev/block/%u:%u " , sysfs_dir ,
MAJOR ( devno ) , MINOR ( devno ) ) < 0 ) {
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
log_error ( " Sysfs path string is too long. " ) ;
return NULL ;
}
if ( ( size = readlink ( path , buf , buf_size - 1 ) ) < 0 ) {
log_sys_error ( " readlink " , path ) ;
return NULL ;
}
buf [ size ] = ' \0 ' ;
if ( ! ( name = strrchr ( buf , ' / ' ) ) ) {
log_error ( " Cannot find device name in sysfs path. " ) ;
return NULL ;
}
name + + ;
return name ;
}
# ifdef UDEV_SYNC_SUPPORT
static int _dev_is_mpath_component_udev ( struct device * dev )
{
const char * value ;
struct dev_ext * ext ;
/*
* external_device_info_source = " udev " enables these udev checks .
* external_device_info_source = " none " disables them .
*/
if ( ! ( ext = dev_ext_get ( dev ) ) )
return_0 ;
value = udev_device_get_property_value ( ( struct udev_device * ) ext - > handle , DEV_EXT_UDEV_BLKID_TYPE ) ;
if ( value & & ! strcmp ( value , DEV_EXT_UDEV_BLKID_TYPE_MPATH ) )
return 1 ;
value = udev_device_get_property_value ( ( struct udev_device * ) ext - > handle , DEV_EXT_UDEV_MPATH_DEVICE_PATH ) ;
if ( value & & ! strcmp ( value , " 1 " ) )
return 1 ;
return 0 ;
}
# else
static int _dev_is_mpath_component_udev ( struct device * dev )
{
return 0 ;
}
# endif
2022-03-30 01:18:45 +03:00
/* mpath_devno is major:minor of the dm multipath device currently using the component dev. */
2022-06-06 22:04:20 +03:00
static int _dev_is_mpath_component_sysfs ( struct cmd_context * cmd , struct device * dev ,
int primary_result , dev_t primary_dev , dev_t * mpath_devno )
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
{
struct dev_types * dt = cmd - > dev_types ;
const char * name ; /* e.g. "sda" for "/dev/sda" */
char link_path [ PATH_MAX ] ; /* some obscure, unpredictable sysfs path */
char holders_path [ PATH_MAX ] ; /* e.g. "/sys/block/sda/holders/" */
2021-07-09 23:05:11 +03:00
char dm_dev_path [ PATH_MAX ] ; /* e.g. "/dev/dm-1" */
2024-05-29 23:43:11 +03:00
char uuid [ DM_UUID_LEN ] ;
2021-07-09 23:05:11 +03:00
char * holder_name ; /* e.g. "dm-1" */
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
const char * sysfs_dir = dm_sysfs_dir ( ) ;
2021-07-09 23:05:11 +03:00
DIR * dr ;
struct dirent * de ;
2024-05-28 17:17:53 +03:00
unsigned dev_major = MAJOR ( dev - > dev ) ;
unsigned dev_minor = MINOR ( dev - > dev ) ;
2023-07-13 13:32:44 +03:00
unsigned dm_dev_major ;
unsigned dm_dev_minor ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
struct stat info ;
2021-07-09 23:05:11 +03:00
int is_mpath_component = 0 ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2022-06-06 22:04:20 +03:00
switch ( primary_result ) {
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
case 2 : /* The dev is partition. */
/* gets "foo" for "/dev/foo" where "/dev/foo" comes from major:minor */
if ( ! ( name = _get_sysfs_name_by_devt ( sysfs_dir , primary_dev , link_path , sizeof ( link_path ) ) ) )
return_0 ;
break ;
case 1 : /* The dev is already a primary dev. Just continue with the dev. */
/* gets "foo" for "/dev/foo" */
if ( ! ( name = _get_sysfs_name ( dev ) ) )
return_0 ;
break ;
default : /* 0, error. */
2024-05-28 17:17:53 +03:00
log_warn ( " Failed to get primary device for %u:%u. " , dev_major , dev_minor ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 0 ;
}
if ( dm_snprintf ( holders_path , sizeof ( holders_path ) , " %sblock/%s/holders " , sysfs_dir , name ) < 0 ) {
log_warn ( " Sysfs path to check mpath is too long. " ) ;
return 0 ;
}
/* also will filter out partitions */
if ( stat ( holders_path , & info ) )
return 0 ;
if ( ! S_ISDIR ( info . st_mode ) ) {
log_warn ( " Path %s is not a directory. " , holders_path ) ;
return 0 ;
}
/*
2021-07-09 23:05:11 +03:00
* If any holder is a dm mpath device , then return 1 ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
*/
2021-07-09 23:05:11 +03:00
if ( ! ( dr = opendir ( holders_path ) ) ) {
log_debug ( " Device %s has no holders dir " , dev_name ( dev ) ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 0 ;
}
2021-07-09 23:05:11 +03:00
while ( ( de = readdir ( dr ) ) ) {
if ( ! strcmp ( de - > d_name , " . " ) | | ! strcmp ( de - > d_name , " .. " ) )
continue ;
/*
* holder_name is e . g . " dm-1 "
* dm_dev_path is then e . g . " /dev/dm-1 "
*/
holder_name = de - > d_name ;
if ( dm_snprintf ( dm_dev_path , sizeof ( dm_dev_path ) , " %s/%s " , cmd - > dev_dir , holder_name ) < 0 ) {
log_warn ( " dm device path to check mpath is too long. " ) ;
continue ;
}
/*
* stat " /dev/dm-1 " which is the holder of the dev we ' re checking
* dm_dev_major : dm_dev_minor come from stat ( " /dev/dm-1 " )
*/
if ( stat ( dm_dev_path , & info ) ) {
log_debug_devs ( " dev_is_mpath_component %s holder %s stat result %d " ,
dev_name ( dev ) , dm_dev_path , errno ) ;
continue ;
}
2023-07-13 13:32:44 +03:00
dm_dev_major = MAJOR ( info . st_rdev ) ;
dm_dev_minor = MINOR ( info . st_rdev ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2021-07-09 23:05:11 +03:00
if ( dm_dev_major ! = dt - > device_mapper_major ) {
log_debug_devs ( " dev_is_mpath_component %s holder %s %d:%d does not have dm major " ,
dev_name ( dev ) , dm_dev_path , dm_dev_major , dm_dev_minor ) ;
continue ;
}
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2021-07-09 23:05:11 +03:00
/*
* A previous call may have checked if dm_dev_minor is mpath and saved
* the result in the hash table . If there ' s a saved result just use that .
*
* The minor number of " /dev/dm-1 " is added to the hash table with
* const value 2 meaning that dm minor 1 ( for / dev / dm - 1 ) is a multipath dev
* and const value 1 meaning that dm minor 1 is not a multipath dev .
*/
if ( _minor_hash_tab ) {
2024-05-14 18:45:49 +03:00
void * d = dm_hash_lookup_binary ( _minor_hash_tab , & dm_dev_minor , sizeof ( dm_dev_minor ) ) ;
long look = ( long ) d ;
2021-07-09 23:05:11 +03:00
if ( look > 0 ) {
log_debug_devs ( " dev_is_mpath_component %s holder %s %u:%u already checked as %sbeing mpath. " ,
dev_name ( dev ) , holder_name , dm_dev_major , dm_dev_minor , ( look > 1 ) ? " " : " not " ) ;
is_mpath_component = ( look = = 2 ) ;
goto out ;
}
/* no saved result for dm_dev_minor, so check the uuid for it */
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
2024-05-29 23:43:11 +03:00
/* Check whether holder's UUID uses MPATH prefix */
/* TODO: reuse/merge with dev_has_mpath_uuid() as this function also recognizes kpartx partition */
2024-06-28 21:35:12 +03:00
if ( devno_dm_uuid ( cmd , dm_dev_major , dm_dev_minor , uuid , sizeof ( uuid ) ) & &
2024-05-29 23:43:11 +03:00
! strncmp ( uuid , MPATH_PREFIX , sizeof ( MPATH_PREFIX ) - 1 ) ) {
2021-07-09 23:05:11 +03:00
log_debug_devs ( " dev_is_mpath_component %s holder %s %u:%u ignore mpath component " ,
dev_name ( dev ) , holder_name , dm_dev_major , dm_dev_minor ) ;
/* For future checks, save that the dm minor refers to mpath ("2" == is mpath) */
if ( _minor_hash_tab )
( void ) dm_hash_insert_binary ( _minor_hash_tab , & dm_dev_minor , sizeof ( dm_dev_minor ) , ( void * ) 2 ) ;
is_mpath_component = 1 ;
goto out ;
}
/* For future checks, save that the dm minor does not refer to mpath ("1" == is not mpath) */
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if ( _minor_hash_tab )
2021-07-09 23:05:11 +03:00
( void ) dm_hash_insert_binary ( _minor_hash_tab , & dm_dev_minor , sizeof ( dm_dev_minor ) , ( void * ) 1 ) ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
2021-07-09 23:05:11 +03:00
out :
if ( closedir ( dr ) )
2023-08-31 19:47:42 +03:00
log_sys_debug ( " closedir " , holders_path ) ;
2021-07-09 23:05:11 +03:00
2022-03-30 01:18:45 +03:00
if ( is_mpath_component )
* mpath_devno = MKDEV ( dm_dev_major , dm_dev_minor ) ;
2021-07-09 23:05:11 +03:00
return is_mpath_component ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
2022-06-06 22:04:20 +03:00
static int _dev_in_wwid_file ( struct cmd_context * cmd , struct device * dev ,
int primary_result , dev_t primary_dev )
{
char idbuf [ DEV_WWID_SIZE ] = { 0 } ;
struct dev_wwid * dw ;
2022-08-30 23:10:52 +03:00
char * wwid , * full_wwid ;
2022-06-06 22:04:20 +03:00
if ( ! _wwid_hash_tab )
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 0 ;
/*
2022-06-06 22:04:20 +03:00
* Check the primary device , not the partition .
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
*/
2022-06-06 22:04:20 +03:00
if ( primary_result = = 2 ) {
2024-07-08 23:32:41 +03:00
if ( ! ( dev = dev_cache_get_by_devt ( cmd , primary_dev ) ) ) {
2022-06-06 22:04:20 +03:00
log_debug ( " dev_is_mpath_component %s no primary dev " , dev_name ( dev ) ) ;
return 0 ;
}
}
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2022-06-06 22:04:20 +03:00
/*
2022-08-30 23:10:52 +03:00
* sysfs wwid uses format : naa . < value > , eui . < value > , t10 . < value > .
* multipath wwids file uses format : 3 < value > , 2 < value > , 1 < value > .
*
* We omit the type prefix before looking up . The multipath / wwids
* values in the wwid_hash_tab have the initial character removed .
*
* There ' s no type prefix for " scsi name string " type 8 ids .
*
* First try looking up any wwids that have already been read .
2022-06-06 22:04:20 +03:00
*/
2022-08-30 23:10:52 +03:00
lookup :
dm_list_iterate_items ( dw , & dev - > wwids ) {
2024-12-07 00:02:20 +03:00
if ( dw - > scsi_type = = 1 | | dw - > scsi_type = = 2 | | dw - > scsi_type = = 3 )
2022-08-30 23:10:52 +03:00
wwid = & dw - > id [ 4 ] ;
else
wwid = dw - > id ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
2022-08-30 23:10:52 +03:00
if ( dm_hash_lookup_binary ( _wwid_hash_tab , wwid , strlen ( wwid ) ) ) {
full_wwid = dw - > id ;
goto found ;
}
}
2022-06-06 22:04:20 +03:00
/*
2022-08-30 23:10:52 +03:00
* The id from sysfs wwid may not be the id used by multipath ,
* or a device may not have a vpd_pg83 file ( e . g . nvme ) .
2022-06-06 22:04:20 +03:00
*/
2022-08-30 23:10:52 +03:00
if ( ! ( dev - > flags & DEV_ADDED_VPD_WWIDS ) & & dev_read_vpd_wwids ( cmd , dev ) )
goto lookup ;
if ( ! ( dev - > flags & DEV_ADDED_SYS_WWID ) & & dev_read_sys_wwid ( cmd , dev , idbuf , sizeof ( idbuf ) , & dw ) ) {
2024-12-07 00:02:20 +03:00
if ( dw - > scsi_type = = 1 | | dw - > scsi_type = = 2 | | dw - > scsi_type = = 3 )
2022-06-06 22:04:20 +03:00
wwid = & dw - > id [ 4 ] ;
else
wwid = dw - > id ;
if ( dm_hash_lookup_binary ( _wwid_hash_tab , wwid , strlen ( wwid ) ) ) {
2022-08-30 23:10:52 +03:00
full_wwid = dw - > id ;
goto found ;
2022-06-06 22:04:20 +03:00
}
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
2022-06-06 22:04:20 +03:00
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 0 ;
2022-08-30 23:10:52 +03:00
found :
log_debug_devs ( " dev_is_mpath_component %s %s in wwids file " , dev_name ( dev ) , full_wwid ) ;
return 1 ;
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
}
2022-03-30 01:18:45 +03:00
int dev_is_mpath_component ( struct cmd_context * cmd , struct device * dev , dev_t * holder_devno )
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
{
2022-06-06 22:04:20 +03:00
struct dev_types * dt = cmd - > dev_types ;
int primary_result ;
dev_t primary_dev ;
/*
* multipath only uses SCSI or NVME devices
*/
2024-12-07 00:02:20 +03:00
if ( ! major_is_scsi_device ( dt , MAJOR ( dev - > dev ) ) & & ! dev_is_nvme ( dev ) )
2022-06-06 22:04:20 +03:00
return 0 ;
/*
* primary_result 2 : dev is a partition , primary_dev is the whole device
* primary_result 1 : dev is a whole device
*/
2023-05-10 14:28:38 +03:00
if ( ! ( primary_result = dev_get_primary_dev ( dt , dev , & primary_dev ) ) )
return_0 ;
2022-06-06 22:04:20 +03:00
if ( _dev_is_mpath_component_sysfs ( cmd , dev , primary_result , primary_dev , holder_devno ) = = 1 )
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
goto found ;
2022-06-06 22:04:20 +03:00
if ( _dev_in_wwid_file ( cmd , dev , primary_result , primary_dev ) )
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
goto found ;
if ( external_device_info_source ( ) = = DEV_EXT_UDEV ) {
if ( _dev_is_mpath_component_udev ( dev ) = = 1 )
goto found ;
}
2022-06-06 22:04:20 +03:00
/*
* TODO : save the result of this function in dev - > flags and use those
* flags on repeated calls to avoid repeating the work multiple times
* for the same device when there are partitions on the device .
*/
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
return 0 ;
found :
return 1 ;
}
2021-11-18 02:10:45 +03:00
const char * dev_mpath_component_wwid ( struct cmd_context * cmd , struct device * dev )
{
char slaves_path [ PATH_MAX ] ;
char wwid_path [ PATH_MAX ] ;
char sysbuf [ PATH_MAX ] = { 0 } ;
char * slave_name ;
const char * wwid = NULL ;
DIR * dr ;
struct dirent * de ;
/* /sys/dev/block/253:7/slaves/sda/device/wwid */
2024-05-28 17:17:53 +03:00
if ( dm_snprintf ( slaves_path , sizeof ( slaves_path ) , " %sdev/block/%u:%u/slaves " ,
dm_sysfs_dir ( ) , MAJOR ( dev - > dev ) , MINOR ( dev - > dev ) ) < 0 ) {
2021-11-18 02:10:45 +03:00
log_warn ( " Sysfs path to check mpath components is too long. " ) ;
return NULL ;
}
/* Get wwid from first component */
if ( ! ( dr = opendir ( slaves_path ) ) ) {
2024-05-07 15:48:55 +03:00
if ( errno = = ENOTDIR )
log_warn ( " WARNING: Path %s is not a directory. " , slaves_path ) ;
else if ( errno ! = ENOENT )
log_sys_debug ( " opendir " , slaves_path ) ;
2021-11-18 02:10:45 +03:00
return NULL ;
}
while ( ( de = readdir ( dr ) ) ) {
if ( ! strcmp ( de - > d_name , " . " ) | | ! strcmp ( de - > d_name , " .. " ) )
continue ;
/* slave_name "sda" */
slave_name = de - > d_name ;
/* read /sys/block/sda/device/wwid */
2022-08-10 16:09:34 +03:00
if ( dm_snprintf ( wwid_path , sizeof ( wwid_path ) , " %sblock/%s/device/wwid " ,
2024-01-05 17:13:42 +03:00
dm_sysfs_dir ( ) , slave_name ) < 0 ) {
2021-11-18 02:10:45 +03:00
log_warn ( " Failed to create sysfs wwid path for %s " , slave_name ) ;
continue ;
}
2024-01-05 17:13:42 +03:00
if ( ! get_sysfs_value ( wwid_path , sysbuf , sizeof ( sysbuf ) , 0 ) )
stack ;
2021-11-18 02:10:45 +03:00
if ( ! sysbuf [ 0 ] )
continue ;
if ( strstr ( sysbuf , " scsi_debug " ) ) {
2023-07-13 13:32:44 +03:00
unsigned i ;
2021-11-18 02:10:45 +03:00
for ( i = 0 ; i < strlen ( sysbuf ) ; i + + ) {
if ( sysbuf [ i ] = = ' ' )
sysbuf [ i ] = ' _ ' ;
}
}
if ( ( wwid = dm_pool_strdup ( cmd - > mem , sysbuf ) ) )
break ;
}
if ( closedir ( dr ) )
2023-08-31 19:47:42 +03:00
log_sys_debug ( " closedir " , slaves_path ) ;
2021-11-18 02:10:45 +03:00
return wwid ;
}