shaba/lvm2
1
0
Fork 0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-21 13:34:40 +03:00
Code Releases Activity
14ea63cfc7
lvm2/tools/command-lines.in

1985 lines
63 KiB
Plaintext
Raw Normal View History

commands: move command def parsing into lvm binary It was previously done at build time by the ccmd binary.
2017-02-10 20:36:11 +03:00
# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
# Copyright (C) 2004-2017 Red Hat, Inc. All rights reserved.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
commands: move command def parsing into lvm binary It was previously done at build time by the ccmd binary.
2017-02-10 20:36:11 +03:00
# This file is part of LVM2.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
commands: move command def parsing into lvm binary It was previously done at build time by the ccmd binary.
2017-02-10 20:36:11 +03:00
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU Lesser General Public License v.2.1.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
commands: move command def parsing into lvm binary It was previously done at build time by the ccmd binary.
2017-02-10 20:36:11 +03:00
# You should have received a copy of the GNU Lesser General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
# Syntax
#
# A new command has a unique combination of:
# command name, required option args and required
# positional args.
#
# To define a new command, begin a single line with a
# command name, followed by required options/args,
# (e.g. --foo, or --foo val), followed by required
# positional args, (e.g. VG)
#
# After the single line of required elements are lines
# of optional elements:
# OO: <optional --option args>
# OP: <optional positional args>
#
# command_name required_opt_arg ... required_pos_arg ...
# OO: optional_opt_arg, ...
# OP: optional_pos_arg ...
#
# required_opt_arg/optional_opt_arg must begin with the
# long form option name, e.g. --foo. If the option name
# takes a value, then the type of value is specified,
# e.g. --foo String.
#
# Possible option names are listed in args.h
#
# Use --foo_long to specify that only the long form of
# --foo is accepted by the command. (This is uncommon.)
#
# Possible option arg types are shown in tools/vals.h,
# e.g. Bool, String, VG, SizeMB.
#
# --option args outside the list of types in vals.h are treated
# as literal (non-variable) strings or numbers.
#
# positional args can be multiple types separated by |, e.g. VG|LV|Tag
#
# If a positional arg is repeatable, it is followed by ..., e.g. VG|LV|Tag ...
#
# LV can have a suffix indicating the LV type, e.g. LV_linear, LV_thinpool.
# LV_raid represents any raidN. LV_type1_type2_type3 when the LV is
# limited to multiple specific types.
#
# Note that two commands whose required paramters differ only by
# the LV types they accept are ambiguous. That is, they cannot be
# distinguished by just looking at the command, but require reading
# the VG to find the LV type. So, command definitions that differ
# only in accepted LV types are not allowed. It would be best to
# distinguish them by using different option names.
# There are FIXME's below for some of these cases.
#
# VG, LV can have the suffix _new, indicating the named VG or LV
# does not yet exist.
#
# If Select is included in pos_arg, it means that the pos_arg
# may be empty if the --select option is used.
#
# --size and --extents are interchangable, but only --size is used
# in these definitions to keep them simpler. --extents is
# automatically included and recognized as an alternative to --size.
#
# lvcreate generally requires a VG arg in position 1 and does not
# require the --name option (when --name is omitted, a name is
# generated). But, all commands of that form have a variant which
# is not defined here, but which is automatically recognized as
# being equivalent. That variant allows the required VG arg to
# be omitted when --name VG/LV is specified, or when the
# LVM_VG_NAME env var is set and --name LV is specified.
# The lvcreate variants with --name and without a VG arg are
# automatically recognized as an alternative to the defined
# command forms requiring the VG and no --name.
# Also, --thinpool VG/LV or --cachepool VG/LV can be used in
# place of --name to provide the VG name instead of pos 1.
#
# Note that one the most difficult aspect of these definitions is
# the variants of --thin / --type thin / --type thin-pool,
# --cache / --type cache / --type cache-pool.
# There are no consistent rules to follow and the behaviors are
# unpredictable; each possible variation and combination needs
# to be tested individually to see what it means.
#
# Some options have multiple names, but only one form of the name
# is used in these definitions. Synonyms will be recognized when
# matching a command to a command definition.
#
# used in definitions below (equivalent but not used in definitions)
# mirrorlog core (not corelog)
# resizeable (resizable or allocation)
# allocatable (allocation)
# activate (available)
# rebuild (raidrebuild)
# syncaction (raidsyncaction)
# writemostly (raidwritemostly)
# minrecoveryrate (raidminrecoveryrate)
# maxrecoveryrate (raidmaxrecoveryrate)
# writebehind (raidwritebehind)
# virtualsize (virtualoriginsize)
args: split is a synonym for splitcache also tidy the other synonyms
2017-01-19 22:47:24 +03:00
# splitcache (split)
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# vgmetadatacopies (metadatacopies)
# pvmetadatacopies (metadatacopies)
#
# "---" is like a comment line, used to separate text for readability
#
# ID: A unique string identifying the command. Two commands that do
# the same thing, but are alternate syntaxes can share the same ID,
# in which case the implementation would have to sort out which
# args to look at for the required parameters. Or, the two commands
# could use differnet IDs, in which case the implementation would
# know where to look for each parameter.
#
# DESC: A description of the command. The "DESC:" tags will be
# included in the text as indicators of new lines when printing
# the descriptions for help/man output.
#
# RULE: rules that a given command must follow, i.e. required (and)
# or invalid (not) combinations of options, LV types or LV properties.
#
# RULE: A and|not B
#
# Conditions in A are applied to a given command+LV.
# If the conditions in A are true, then the checks in B
# are applied. If the checks in B are true|false according
# to and|not, then the command fails|continues.
#
# When A is "all", the conditions in B are always applied.
#
# Conditions:
# . if any --option listed is set, the checks may apply
# . if any LV_type listed matches LV, the checks may apply
# . if all lv_is_prop listed matches LV, the checks may apply
# . if all of the above pass, then perform the checks
#
# Checks for "and":
# . if any --option listed is not set, then fail
# . if none of the LV_types matches the LV, then fail
# . if any of the lv_is_prop do not match the LV, then fail
#
# Checks for "not":
# . if any --option listed is set, then fail
# . if any of the LV_types matches the LV, then fail
# . if any of the lv_is_prop match the LV, then fail
#
# RULE: --option|LV_type|lv_is_prop|all ... and|not --option|LV_type|lv_is_prop ...
#
# RULE: --opt1 not --opt2
# RULE: --opt1 and --opt2
# RULE: --opt1 LV_type1 lv_is_prop1 and --opt2
# RULE: --opt1 LV_type1 and lv_is_prop1
# RULE: LV_type1 and lv_is_prop1
#
#
#
# For efficiency, sets of options can be defined and reused
# in multiple command definitions.
#
# To define a common set of options:
# OO_NAME: --foo, --bar String
#
# To use this set of options, include it on the OO: line, e.g.
# OO: --example, OO_NAME
#
# which is expaneded to
# OO: --example, --foo, --bar String
#
# Including OO_NAME after a command name on the required line
# means that any one of the options is required and the rest
# are optional. The usage syntax for this case is printed as:
# command (--foo A, --bar B)
#
#
# OO_ALL is included in every command automatically.
#
OO_ALL: --commandprofile String, --config String, --debug,
Rework lock-override options and locking_type settings The last commit related to this was incomplete: "Implement lock-override options without locking type" This is further reworking and reduction of the locking.[ch] layer which handled all clustering, but is now only used for file locking. The "locking types" that this layer implemented were removed previously, leaving only the standard file locking. (Some cluster-related artifacts remain to be cleared out later.) Command options to override or modify locking behavior are reimplemented here without using the locking types. Also, deprecated locking_type values are recognized, and implemented as if one of the equivalent override options was set. Options that override file locking are: . --nolocking disables all file locking. . --readonly grants read lock requests without actually taking a file lock, and refuses write lock requests. . --ignorelockingfailure tries to set up file locks and uses them normally if possible. When not possible, it behaves like --readonly, but allows activation. . --sysinit is the same as ignorelockingfailure. . global/metadata_read_only acquires actual read file locks, and refuses write lock requests. (Some of these options could probably be deprecated because they were added as workarounds to various locking_type behaviors that are now deprecated.) The locking_type setting now has one valid value: 1 which refers to standard file locking. Configs that contain deprecated values are recognized and still work in largely the same way: . 0 disabled all locking, now implemented like --nolocking is set. Allow the nolocking option in all commands. . 1 is the normal file locking setting and is unchanged. . 2 was for external locking which was not used, and reverts to normal file locking. . 3 was for cluster/clvm. This reverts to normal file locking, and prints messages about lvmlockd. . 4 was equivalent to readonly, now implemented like --readonly is set. . 5 disabled all locking, now implemented like --nolocking is set.
2018-06-07 23:33:02 +03:00
--driverloaded Bool, --help, --nolocking, --lockopt String, --longhelp, --profile String, --quiet,
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
--verbose, --version, --yes, --test, --devicesfile String, --devices PV
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
# options for pvs, lvs, vgs, fullreport
#
OO_REPORT: --aligned, --all, --binary, --configreport ConfigReport, --foreign,
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
--ignorelockingfailure, --logonly,
Rework lock-override options and locking_type settings The last commit related to this was incomplete: "Implement lock-override options without locking type" This is further reworking and reduction of the locking.[ch] layer which handled all clustering, but is now only used for file locking. The "locking types" that this layer implemented were removed previously, leaving only the standard file locking. (Some cluster-related artifacts remain to be cleared out later.) Command options to override or modify locking behavior are reimplemented here without using the locking types. Also, deprecated locking_type values are recognized, and implemented as if one of the equivalent override options was set. Options that override file locking are: . --nolocking disables all file locking. . --readonly grants read lock requests without actually taking a file lock, and refuses write lock requests. . --ignorelockingfailure tries to set up file locks and uses them normally if possible. When not possible, it behaves like --readonly, but allows activation. . --sysinit is the same as ignorelockingfailure. . global/metadata_read_only acquires actual read file locks, and refuses write lock requests. (Some of these options could probably be deprecated because they were added as workarounds to various locking_type behaviors that are now deprecated.) The locking_type setting now has one valid value: 1 which refers to standard file locking. Configs that contain deprecated values are recognized and still work in largely the same way: . 0 disabled all locking, now implemented like --nolocking is set. Allow the nolocking option in all commands. . 1 is the normal file locking setting and is unchanged. . 2 was for external locking which was not used, and reverts to normal file locking. . 3 was for cluster/clvm. This reverts to normal file locking, and prints messages about lvmlockd. . 4 was equivalent to readonly, now implemented like --readonly is set. . 5 disabled all locking, now implemented like --nolocking is set.
2018-06-07 23:33:02 +03:00
--nameprefixes, --noheadings, --nosuffix,
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
--options String, --readonly, --reportformat ReportFmt, --rows,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--select String, --separator String, --shared, --sort String,
remove unused trustcache option
2019-06-11 19:42:49 +03:00
--unbuffered, --units Units, --unquoted
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
# options for config, dumpconfig, lvmconfig
#
OO_CONFIG: --atversion String, --typeconfig ConfigType, --file String, --ignoreadvanced,
--ignoreunsupported, --ignorelocal, --list, --mergedconfig, --metadataprofile String,
--sinceversion String, --showdeprecated, --showunsupported, --validate, --withsummary,
lvmconfig: Add options to produce file preamble Use --withgeneralpreamble and --withlocalpreamble instead of concatenating files.
2017-08-05 18:18:36 +03:00
--withcomments, --withgeneralpreamble, --withlocalpreamble, --withspaces, --unconfigured, --withversions
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
# None of these can function as a required option for lvchange.
OO_LVCHANGE: --autobackup Bool, --force, --ignoremonitoring,
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
--noudevsync, --reportformat ReportFmt, --select String
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# Any of these can function as a required option for lvchange.
# profile is also part of OO_ALL, but is repeated in OO_LVCHANGE_META
# because it can function as a required opt.
OO_LVCHANGE_META: --addtag Tag, --deltag Tag,
--alloc Alloc, --contiguous Bool,
lvchange: vdo support compression deduplication change Add basic support for changing compression and deduplication state of a VDO pool volume. Allowing to access it also via top-level VDO volume.
2018-07-02 11:51:45 +03:00
--compression Bool, --deduplication Bool,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--detachprofile, --metadataprofile String, --profile String,
--permission Permission, --readahead Readahead, --setactivationskip Bool,
--errorwhenfull Bool, --discards Discards, --zero Bool,
--cachemode CacheMode, --cachepolicy String, --cachesettings String,
--minrecoveryrate SizeKB, --maxrecoveryrate SizeKB,
--writebehind Number, --writemostly WriteMostlyPV, --persistent n
lvchange: make use of command definitions Reorganize the lvchange code to take advantage of the command definition, and remove the validation that is done by the command definintion rules.
2016-11-17 01:05:47 +03:00
# It's unfortunate that activate needs to be optionally allowed here;
# it should only be used explicitly, but it's been previously allowed
# in combination with unrelated metadata changes.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvchange OO_LVCHANGE_META VG|LV|Tag|Select ...
vgchange/lvchange: fix poll and monitor use Fill in some gaps where old versions of lvm allowed --poll and --monitor in combination with other operations, but those combinations had been lost since the cmd def work. (The new cmd def code also added some combinations that had been missed by the old code.) Changes: lvchange --activate: add poll and monitor options, and add calls to them in implementation. lvchange --refresh: add monitor option (poll already there), and call to monitor in implementation. lvchange <metadata ops>: add poll and monitor options, and add calls to them in implementation. vgchange <metadata ops>: add poll option (call to poll already in implementation). vgchange --refresh: remove monitor option (not used by code) lvchange --persistent y: add poll and monitor options, and add calls to them, and to activate in the implementation. (Making it match the main lvchange metadata command.) Summary of current usage: lvchange --activate: monitor, poll vgchange --activate: monitor, poll lvchange --refresh: monitor, poll vgchange --refresh: poll lvchange --monitor: ok lvchange --poll: ok lvchange --monitor --poll: ok vgchange --monitor: ok vgchange --poll: ok vgchange --monitor --poll: ok lvchange <metadata ops>: monitor, poll vgchange <metadata ops>: poll
2017-04-04 20:52:29 +03:00
OO: --activate Active, --poll Bool, --monitor Bool, OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_properties
man vgchange/lvchange: note special option usage
2017-02-21 00:26:24 +03:00
DESC: Change a general LV attribute.
DESC: For options listed in parentheses, any one is
DESC: required, after which the others are optional.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
RULE: all not lv_is_pvmove lv_is_mirror_log lv_is_mirror_image
RULE: all and lv_is_vg_writable
RULE: --contiguous not --alloc
RULE: --profile not --detachprofile
RULE: --metadataprofile not --detachprofile
RULE: --minrecoveryrate --maxrecoveryrate and LV_raid
RULE: --writebehind --writemostly and LV_raid1
writecache: cachesettings in lvchange and lvs lvchange --cachesettings lvs -o+cache_settings
2020-02-26 23:47:29 +03:00
RULE: --cachemode --cachepolicy --cachesettings and LV_cache LV_cachepool LV_writecache
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
RULE: --errorwhenfull --discards --zero and LV_thinpool
RULE: --permission not lv_is_external_origin lv_is_raid_metadata lv_is_raid_image LV_thinpool
lvchange: snapshot thick origin permission rw/r User is allowed to change permission for thick origin. FIXME: it's not quite clear why few others are prohibited to change.
2021-02-10 02:38:37 +03:00
RULE: --alloc --contiguous --metadataprofile --persistent --profile --readahead not lv_is_thick_origin
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
RULE: --alloc --discards --zero --cachemode --cachepolicy --cachesettings not lv_is_partial
commands: move command def parsing into lvm binary It was previously done at build time by the ccmd binary.
2017-02-10 20:36:11 +03:00
# It's unfortunate that activate needs to be optionally allowed here,
lvchange: make use of command definitions Reorganize the lvchange code to take advantage of the command definition, and remove the validation that is done by the command definintion rules.
2016-11-17 01:05:47 +03:00
# like above, it was previouly allowed in combination.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvchange --resync VG|LV_raid_mirror|Tag|Select ...
lvchange: make use of command definitions Reorganize the lvchange code to take advantage of the command definition, and remove the validation that is done by the command definintion rules.
2016-11-17 01:05:47 +03:00
OO: --activate Active, OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_resync
DESC: Resyncronize a mirror or raid LV.
lvchange: add --resync help/manual text relative to 'R' attribute Add information that --resync clears the 'R' attribute on not initially synchronized mirror/RAID LVs. Related: 1708299
2019-09-06 15:08:29 +03:00
DESC: Use to reset 'R' attribute on a not initially synchronized LV.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_pvmove lv_is_locked lv_is_raid_with_integrity
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
RULE: all not LV_raid0
lvchange --syncaction SyncAction VG|LV_raid|Tag|Select ...
OO: OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_syncaction
DESC: Resynchronize or check a raid LV.
RULE: all not LV_raid0
lvchange --rebuild PV VG|LV_raid|Tag|Select ...
OO: OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_rebuild
DESC: Reconstruct data on specific PVs of a raid LV.
RULE: all not LV_raid0
lvchange --activate Active VG|LV|Tag|Select ...
vgchange/lvchange: fix poll and monitor use Fill in some gaps where old versions of lvm allowed --poll and --monitor in combination with other operations, but those combinations had been lost since the cmd def work. (The new cmd def code also added some combinations that had been missed by the old code.) Changes: lvchange --activate: add poll and monitor options, and add calls to them in implementation. lvchange --refresh: add monitor option (poll already there), and call to monitor in implementation. lvchange <metadata ops>: add poll and monitor options, and add calls to them in implementation. vgchange <metadata ops>: add poll option (call to poll already in implementation). vgchange --refresh: remove monitor option (not used by code) lvchange --persistent y: add poll and monitor options, and add calls to them, and to activate in the implementation. (Making it match the main lvchange metadata command.) Summary of current usage: lvchange --activate: monitor, poll vgchange --activate: monitor, poll lvchange --refresh: monitor, poll vgchange --refresh: poll lvchange --monitor: ok lvchange --poll: ok lvchange --monitor --poll: ok vgchange --monitor: ok vgchange --poll: ok vgchange --monitor --poll: ok lvchange <metadata ops>: monitor, poll vgchange <metadata ops>: poll
2017-04-04 20:52:29 +03:00
OO: --activationmode ActivationMode, --partial, --poll Bool, --monitor Bool,
fix readonly activation override options This fixes a problem in commit e6bb780d242, in which the back compat handling for the old locking_type=4 was incorrectly translated to mean the same thing as --readonly, which prevented activation because activation uses an exclusive vg lock. Previously, locking_type=4 allowed activation. If we see locking_type 4 in an old config, translate it to the new combination of --readonly and --sysinit, which we now define to mean the --readonly behavior with an exception to allow activation.
2018-09-12 23:59:47 +03:00
--ignoreactivationskip, --ignorelockingfailure, --sysinit, --readonly, OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_activate
DESC: Activate or deactivate an LV.
lvchange --refresh VG|LV|Tag|Select ...
vgchange/lvchange: fix poll and monitor use Fill in some gaps where old versions of lvm allowed --poll and --monitor in combination with other operations, but those combinations had been lost since the cmd def work. (The new cmd def code also added some combinations that had been missed by the old code.) Changes: lvchange --activate: add poll and monitor options, and add calls to them in implementation. lvchange --refresh: add monitor option (poll already there), and call to monitor in implementation. lvchange <metadata ops>: add poll and monitor options, and add calls to them in implementation. vgchange <metadata ops>: add poll option (call to poll already in implementation). vgchange --refresh: remove monitor option (not used by code) lvchange --persistent y: add poll and monitor options, and add calls to them, and to activate in the implementation. (Making it match the main lvchange metadata command.) Summary of current usage: lvchange --activate: monitor, poll vgchange --activate: monitor, poll lvchange --refresh: monitor, poll vgchange --refresh: poll lvchange --monitor: ok lvchange --poll: ok lvchange --monitor --poll: ok vgchange --monitor: ok vgchange --poll: ok vgchange --monitor --poll: ok lvchange <metadata ops>: monitor, poll vgchange <metadata ops>: poll
2017-04-04 20:52:29 +03:00
OO: --activationmode ActivationMode, --partial, --poll Bool, --monitor Bool, OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_refresh
DESC: Reactivate an LV using the latest metadata.
lvchange --monitor Bool VG|LV|Tag|Select ...
vgchange/lvchange: fix poll and monitor use Fill in some gaps where old versions of lvm allowed --poll and --monitor in combination with other operations, but those combinations had been lost since the cmd def work. (The new cmd def code also added some combinations that had been missed by the old code.) Changes: lvchange --activate: add poll and monitor options, and add calls to them in implementation. lvchange --refresh: add monitor option (poll already there), and call to monitor in implementation. lvchange <metadata ops>: add poll and monitor options, and add calls to them in implementation. vgchange <metadata ops>: add poll option (call to poll already in implementation). vgchange --refresh: remove monitor option (not used by code) lvchange --persistent y: add poll and monitor options, and add calls to them, and to activate in the implementation. (Making it match the main lvchange metadata command.) Summary of current usage: lvchange --activate: monitor, poll vgchange --activate: monitor, poll lvchange --refresh: monitor, poll vgchange --refresh: poll lvchange --monitor: ok lvchange --poll: ok lvchange --monitor --poll: ok vgchange --monitor: ok vgchange --poll: ok vgchange --monitor --poll: ok lvchange <metadata ops>: monitor, poll vgchange <metadata ops>: poll
2017-04-04 20:52:29 +03:00
OO: OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_monitor
DESC: Start or stop monitoring an LV from dmeventd.
RULE: all not lv_is_pvmove
lvchange --poll Bool VG|LV|Tag|Select ...
OO: --monitor Bool, OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_poll
DESC: Start or stop processing an LV conversion.
lvchange: persistent major/minor processing regression Optimized change. Resolves: rhbz1437611
2017-03-31 18:09:33 +03:00
lvchange --persistent y --minor Number LV
commands: fix misspelling of option value (The cmd def parser really needs to catch mistakes like this as it did when it was external.)
2017-04-05 01:09:35 +03:00
OO: --major Number, --activate Active, --poll Bool, --monitor Bool, OO_LVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvchange_persistent
DESC: Make the minor device number persistent for an LV.
lvchange: vdo support compression deduplication change Add basic support for changing compression and deduplication state of a VDO pool volume. Allowing to access it also via top-level VDO volume.
2018-07-02 11:51:45 +03:00
RULE: all not LV_thinpool LV_cachepool LV_vdopool
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
OO_LVCONVERT_POOL: --poolmetadata LV, --poolmetadatasize SizeMB,
parser: allow --zero for pool conversion
2017-03-03 13:31:31 +03:00
--poolmetadataspare Bool, --readahead Readahead, --chunksize SizeKB,
parser: enable --metadataprofile for pool lvconvert Lvconvert can use values from profile when caching.
2017-03-10 15:02:55 +03:00
--zero Bool, --metadataprofile String
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
command defs: add missing commas even though the parser seems to work fine without them
2021-02-22 19:44:01 +03:00
OO_LVCONVERT_THIN: --discards Discards, --errorwhenfull Bool
lvconvert: thin errorwhenfull and recalculation When converting an existing LV to thin-pool, user may now pass also '--errorwhenfull' option like with 'lvcreate'. Also recalculate chunksize when performace profile is used with conversion (again matching lvcreate). Adds missing flagging for uncropped metadata sizes.
2021-02-17 02:10:32 +03:00
cache: allow to specify cachemetadataformat OO_LVCREATE_CACHE accepts --cachemetadataformat. Support new option --cachemetadataformat auto|1|2 for caching. Word 'auto' can be also be given as '0'.
2017-03-03 13:33:10 +03:00
OO_LVCONVERT_CACHE: --cachemetadataformat CacheMetadataFormat,
--cachemode CacheMode, --cachepolicy String,
commands: include lvconvert cache options as group
2017-02-28 22:47:46 +03:00
--cachesettings String, --zero Bool
command defs: add missing commas even though the parser seems to work fine without them
2021-02-22 19:44:01 +03:00
OO_LVCONVERT_VDO: --metadataprofile String, --readahead Readahead,
--compression Bool, --deduplication Bool, --zero Bool
lvconvert: vdo may convert already formated vdo User use 'lvconvert -Zn --type vdo-pool' to convert an existing vdo formated volume and skip lvm2 internal formating. This however requires user is passing proper matching parameters. For them user can use --profile|--metadataprofile option whos support has been also enhanced. TODO: add support to read values directly from formated volume.
2021-02-16 23:26:35 +03:00
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO_LVCONVERT: --alloc Alloc, --background, --force, --noudevsync
---
# These cover all the core, raid-related type conversions.
# They are all routed into the core raid conversion code.
lvconvert --type linear LV
commands: fix lvconvert options for mirrors/stripes The LVCONVERT_RAID shortcut for including options ended up including mirrors/stripes as optional opts in defs where they were already required, or in defs where they would not be used. Remove the option set and specify in each case only the options wanted.
2017-03-10 23:05:15 +03:00
OO: OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to linear.
RULE: all not lv_is_locked lv_is_pvmove
lvconvert --type striped LV
commands: fix lvconvert options for mirrors/stripes The LVCONVERT_RAID shortcut for including options ended up including mirrors/stripes as optional opts in defs where they were already required, or in defs where they would not be used. Remove the option set and specify in each case only the options wanted.
2017-03-10 23:05:15 +03:00
OO: --stripes_long Number, --stripesize SizeKB, --regionsize RegionSize, --interval Number, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to striped.
lvconvert: use command defs for raid/mirror types All lvconvert functionality has been moved out of the previous monolithic lvconvert code, except conversions related to raid/mirror/striped/linear. This switches that remaining code to be based on command defs, and standard process_each_lv arg processing. This final switch results in quite a bit of dead code that is also removed.
2016-12-20 00:53:21 +03:00
RULE: all not lv_is_locked lv_is_pvmove
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --type mirror LV
lvconvert: allow --stripes/--stripesize in 'mirror' conversions This allows the creation of a striped mirror leg(s) during upconvert by adding lvconvert command line options --stripes/--stripesize for 'mirror' to tools/command-lines.in. In case multiple mirror legs are being added, all will have the same requested striped layout. Resolves: rhbz1720705
2019-07-08 20:07:18 +03:00
OO: --mirrors SNumber, --stripes_long Number, --stripesize SizeKB, --regionsize RegionSize, --interval Number, --mirrorlog MirrorLog, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_raid_types
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Convert LV to type mirror (also see type raid1),
lvconvert: use command defs for raid/mirror types All lvconvert functionality has been moved out of the previous monolithic lvconvert code, except conversions related to raid/mirror/striped/linear. This switches that remaining code to be based on command defs, and standard process_each_lv arg processing. This final switch results in quite a bit of dead code that is also removed.
2016-12-20 00:53:21 +03:00
RULE: all not lv_is_locked lv_is_pvmove
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fixes for recent raid changes - Combine the equivalent lvconvert --type raid defs. (Two cmd defs must be different without relying on LV type, which are not known at the time the cmd def is matched.) - Remove unused optional options from lvconvert --stripes, and lvconvert --stripesize. - Use Number for --stripes_long val type. - Combine the cmd def for raid reshape cleanup into the existing start_poll cmd def (they were duplicate defs). Calls into the raid code from a poll opertion will be added.
2017-02-25 01:43:05 +03:00
# When LV is already raid, this changes the raid layout
# (changing layout of raid0 and raid1 not allowed.)
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --type raid LV
commands: fix lvconvert options for mirrors/stripes The LVCONVERT_RAID shortcut for including options ended up including mirrors/stripes as optional opts in defs where they were already required, or in defs where they would not be used. Remove the option set and specify in each case only the options wanted.
2017-03-10 23:05:15 +03:00
OO: --mirrors SNumber, --stripes_long Number, --stripesize SizeKB, --regionsize RegionSize, --interval Number, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_raid_types
man/help: use order of required options from cmd def Follow the same as written in command-lines.in
2017-03-08 23:51:08 +03:00
DESC: Convert LV to raid or change raid layout
DESC: (a specific raid level must be used, e.g. raid1).
integrity: allow type option to be set when changing mirrors Allow the optional '--type raid1' to be included in the lvconvert command when adding or removing raid images with integrity. It does not change the meaning of the command (specifying a type that matches the current type is redundant but generally allowed.)
2020-07-15 18:57:05 +03:00
RULE: all not lv_is_locked lv_is_pvmove
RULE: lv_is_raid_with_integrity not --stripes_long --stripesize --regionsize --interval
lvconvert: add infrastructure for RaidLV reshaping support In order to support striped raid5/6/10 LV reshaping (change of LV type, stripesize or number of legs), this patch introduces the changes to call the reshaping infratructure from lv_raid_convert(). Changes: - add reshaping calls from lv_raid_convert() - add command definitons for reshaping to tools/command-lines.in - fix raid_rimage_extents() - add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh and lvconvert-raid-reshape-striped_to_linear.sh to test the linear <-> striped multi-step conversions - add lvconvert-raid-reshape.sh reshaping tests - enhance lvconvert-raid-takeover.sh with new raid10 tests Related: rhbz834579 Related: rhbz1191935 Related: rhbz1191978
2017-02-24 06:36:03 +03:00
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --mirrors SNumber LV
commands: fix lvconvert options for mirrors/stripes The LVCONVERT_RAID shortcut for including options ended up including mirrors/stripes as optional opts in defs where they were already required, or in defs where they would not be used. Remove the option set and specify in each case only the options wanted.
2017-03-10 23:05:15 +03:00
OO: --regionsize RegionSize, --interval Number, --mirrorlog MirrorLog, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to raid1 or mirror, or change number of mirror images.
lvconvert: use command defs for raid/mirror types All lvconvert functionality has been moved out of the previous monolithic lvconvert code, except conversions related to raid/mirror/striped/linear. This switches that remaining code to be based on command defs, and standard process_each_lv arg processing. This final switch results in quite a bit of dead code that is also removed.
2016-12-20 00:53:21 +03:00
RULE: all not lv_is_locked lv_is_pvmove
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fixes for recent raid changes - Combine the equivalent lvconvert --type raid defs. (Two cmd defs must be different without relying on LV type, which are not known at the time the cmd def is matched.) - Remove unused optional options from lvconvert --stripes, and lvconvert --stripesize. - Use Number for --stripes_long val type. - Combine the cmd def for raid reshape cleanup into the existing start_poll cmd def (they were duplicate defs). Calls into the raid code from a poll opertion will be added.
2017-02-25 01:43:05 +03:00
lvconvert --stripes_long Number LV_raid
OO: OO_LVCONVERT, --interval Number, --regionsize RegionSize, --stripesize SizeKB
lvconvert: add infrastructure for RaidLV reshaping support In order to support striped raid5/6/10 LV reshaping (change of LV type, stripesize or number of legs), this patch introduces the changes to call the reshaping infratructure from lv_raid_convert(). Changes: - add reshaping calls from lv_raid_convert() - add command definitons for reshaping to tools/command-lines.in - fix raid_rimage_extents() - add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh and lvconvert-raid-reshape-striped_to_linear.sh to test the linear <-> striped multi-step conversions - add lvconvert-raid-reshape.sh reshaping tests - enhance lvconvert-raid-takeover.sh with new raid10 tests Related: rhbz834579 Related: rhbz1191935 Related: rhbz1191978
2017-02-24 06:36:03 +03:00
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert raid LV to change number of stripe images.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_raid_with_integrity
lvconvert: add infrastructure for RaidLV reshaping support In order to support striped raid5/6/10 LV reshaping (change of LV type, stripesize or number of legs), this patch introduces the changes to call the reshaping infratructure from lv_raid_convert(). Changes: - add reshaping calls from lv_raid_convert() - add command definitons for reshaping to tools/command-lines.in - fix raid_rimage_extents() - add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh and lvconvert-raid-reshape-striped_to_linear.sh to test the linear <-> striped multi-step conversions - add lvconvert-raid-reshape.sh reshaping tests - enhance lvconvert-raid-takeover.sh with new raid10 tests Related: rhbz834579 Related: rhbz1191935 Related: rhbz1191978
2017-02-24 06:36:03 +03:00
RULE: all not LV_raid0 LV_raid1
lvconvert --stripesize SizeKB LV_raid
commands: fixes for recent raid changes - Combine the equivalent lvconvert --type raid defs. (Two cmd defs must be different without relying on LV type, which are not known at the time the cmd def is matched.) - Remove unused optional options from lvconvert --stripes, and lvconvert --stripesize. - Use Number for --stripes_long val type. - Combine the cmd def for raid reshape cleanup into the existing start_poll cmd def (they were duplicate defs). Calls into the raid code from a poll opertion will be added.
2017-02-25 01:43:05 +03:00
OO: OO_LVCONVERT, --interval Number, --regionsize RegionSize
lvconvert: add infrastructure for RaidLV reshaping support In order to support striped raid5/6/10 LV reshaping (change of LV type, stripesize or number of legs), this patch introduces the changes to call the reshaping infratructure from lv_raid_convert(). Changes: - add reshaping calls from lv_raid_convert() - add command definitons for reshaping to tools/command-lines.in - fix raid_rimage_extents() - add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh and lvconvert-raid-reshape-striped_to_linear.sh to test the linear <-> striped multi-step conversions - add lvconvert-raid-reshape.sh reshaping tests - enhance lvconvert-raid-takeover.sh with new raid10 tests Related: rhbz834579 Related: rhbz1191935 Related: rhbz1191978
2017-02-24 06:36:03 +03:00
ID: lvconvert_raid_types
DESC: Convert raid LV to change the stripe size.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_raid_with_integrity
lvconvert: add infrastructure for RaidLV reshaping support In order to support striped raid5/6/10 LV reshaping (change of LV type, stripesize or number of legs), this patch introduces the changes to call the reshaping infratructure from lv_raid_convert(). Changes: - add reshaping calls from lv_raid_convert() - add command definitons for reshaping to tools/command-lines.in - fix raid_rimage_extents() - add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh and lvconvert-raid-reshape-striped_to_linear.sh to test the linear <-> striped multi-step conversions - add lvconvert-raid-reshape.sh reshaping tests - enhance lvconvert-raid-takeover.sh with new raid10 tests Related: rhbz834579 Related: rhbz1191935 Related: rhbz1191978
2017-02-24 06:36:03 +03:00
RULE: all not LV_raid0 LV_raid1
args: use arg parsing function for region size Consolidate the validation of the region size arg in a new arg parsing function.
2017-02-08 00:12:24 +03:00
lvconvert --regionsize RegionSize LV_raid
lvconvert: add command to change region size of a raid LV
2017-02-07 20:52:13 +03:00
OO: OO_LVCONVERT
ID: lvconvert_change_region_size
DESC: Change the region size of an LV.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_raid_with_integrity
lvconvert: add command to change region size of a raid LV
2017-02-07 20:52:13 +03:00
RULE: all not LV_raid0
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
lvconvert: add command to change region size of a raid LV
2017-02-07 20:52:13 +03:00
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
# lvconvert raid-related utilities
# Create a new command set for these and migrate them out of lvconvert?
lvconvert --splitmirrors Number --name LV_new LV_raid1_mirror_cache
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_split_mirror_images
DESC: Split images from a raid1 or mirror LV and use them to create a new LV.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_raid_with_integrity
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --splitmirrors Number --trackchanges LV_raid1_cache
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_split_mirror_images
lvconvert: improve text about splitmirrors in messages and man page.
2018-07-23 20:28:48 +03:00
DESC: Split images from a raid1 LV and track changes to origin for later merge.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_raid_with_integrity
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
lvconvert --mergemirrors LV_linear_raid|VG|Tag ...
OO: OO_LVCONVERT
ID: lvconvert_merge_mirror_images
DESC: Merge LV images that were split from a raid1 LV.
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow lv_is_raid_with_integrity
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --mirrorlog MirrorLog LV_mirror
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_change_mirrorlog
DESC: Change the type of mirror log used by a mirror LV.
lvconvert: use command defs for raid/mirror types All lvconvert functionality has been moved out of the previous monolithic lvconvert code, except conversions related to raid/mirror/striped/linear. This switches that remaining code to be based on command defs, and standard process_each_lv arg processing. This final switch results in quite a bit of dead code that is also removed.
2016-12-20 00:53:21 +03:00
RULE: all not lv_is_locked lv_is_pvmove
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
# lvconvert utilities for creating/maintaining thin and cache objects.
# Create a new command set for these and migrate them out of lvconvert?
pool: allow data on zero and error segtypes Renables usage of --type zero and --type error LVs to serve as backend for _tdata device. Clearly not very useful in practice, as it can't store any real data, but usable for some testing and some sort of perfomance checking. lvcreate --type zero -L1T -n pool vg lvconvert --thinpool vg/pool Will create a thin-pool with zero device backend.
2021-03-17 20:26:08 +03:00
lvconvert --type thin --thinpool LV LV_linear_striped_raid_cache_thin_error_zero
parser: allow --zero for pool conversion
2017-03-03 13:31:31 +03:00
OO: --thin, --originname LV_new, OO_LVCONVERT_POOL, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvconvert_to_thin_with_external
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
DESC: Convert LV to a thin LV, using the original LV as an external origin.
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvconvert --type thin
pool: allow data on zero and error segtypes Renables usage of --type zero and --type error LVs to serve as backend for _tdata device. Clearly not very useful in practice, as it can't store any real data, but usable for some testing and some sort of perfomance checking. lvcreate --type zero -L1T -n pool vg lvconvert --thinpool vg/pool Will create a thin-pool with zero device backend.
2021-03-17 20:26:08 +03:00
lvconvert --thin --thinpool LV LV_linear_striped_raid_cache_thin_error_zero
parser: allow --zero for pool conversion
2017-03-03 13:31:31 +03:00
OO: --type thin, --originname LV_new, OO_LVCONVERT_POOL, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvconvert_to_thin_with_external
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Convert LV to a thin LV, using the original LV as an external origin
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
vdo: enable caching for vdopool LV and vdo LV Allow using caching with VDO. User can either cache a single vdopool or a vdo LV - difference when the caching is put-in depends on a use-case and it's upto user to decide which kind of speed is expected.
2019-01-24 16:12:26 +03:00
lvconvert --type cache --cachepool LV LV_linear_striped_raid_thinpool_vdo_vdopool_vdopooldata
commands: include lvconvert cache options as group
2017-02-28 22:47:46 +03:00
OO: --cache, OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
ID: lvconvert_to_cache_with_cachepool
DESC: Attach a cache pool to an LV, converts the LV to type cache.
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvconvert --type cache
vdo: enable caching for vdopool LV and vdo LV Allow using caching with VDO. User can either cache a single vdopool or a vdo LV - difference when the caching is put-in depends on a use-case and it's upto user to decide which kind of speed is expected.
2019-01-24 16:12:26 +03:00
lvconvert --cache --cachepool LV LV_linear_striped_raid_thinpool_vdo_vdopool_vdopooldata
commands: include lvconvert cache options as group
2017-02-28 22:47:46 +03:00
OO: --type cache, OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
ID: lvconvert_to_cache_with_cachepool
DESC: Attach a cache pool to an LV (infers --type cache).
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
lvconvert --type writecache --cachevol LV LV_linear_striped_raid
writecache: set block_size using --cachesettings instead of a separate --writecacheblocksize option. writecache block_size is not technically a setting, but it can borrow the option as a special case.
2018-11-22 00:16:23 +03:00
OO: OO_LVCONVERT, --cachesettings String
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
ID: lvconvert_to_writecache
Add dm-writecache support dm-writecache is used like dm-cache with a standard LV as the cache. $ lvcreate -n main -L 128M -an foo /dev/loop0 $ lvcreate -n fast -L 32M -an foo /dev/pmem0 $ lvconvert --type writecache --cachepool fast foo/main $ lvs -a foo -o+devices LV VG Attr LSize Origin Devices [fast] foo -wi------- 32.00m /dev/pmem0(0) main foo Cwi------- 128.00m [main_wcorig] main_wcorig(0) [main_wcorig] foo -wi------- 128.00m /dev/loop0(0) $ lvchange -ay foo/main $ dmsetup table foo-main_wcorig: 0 262144 linear 7:0 2048 foo-main: 0 262144 writecache p 253:4 253:3 4096 0 foo-fast: 0 65536 linear 259:0 2048 $ lvchange -an foo/main $ lvconvert --splitcache foo/main $ lvs -a foo -o+devices LV VG Attr LSize Devices fast foo -wi------- 32.00m /dev/pmem0(0) main foo -wi------- 128.00m /dev/loop0(0)
2018-08-27 22:53:09 +03:00
DESC: Attach a writecache to an LV, converts the LV to type writecache.
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
Add dm-writecache support dm-writecache is used like dm-cache with a standard LV as the cache. $ lvcreate -n main -L 128M -an foo /dev/loop0 $ lvcreate -n fast -L 32M -an foo /dev/pmem0 $ lvconvert --type writecache --cachepool fast foo/main $ lvs -a foo -o+devices LV VG Attr LSize Origin Devices [fast] foo -wi------- 32.00m /dev/pmem0(0) main foo Cwi------- 128.00m [main_wcorig] main_wcorig(0) [main_wcorig] foo -wi------- 128.00m /dev/loop0(0) $ lvchange -ay foo/main $ dmsetup table foo-main_wcorig: 0 262144 linear 7:0 2048 foo-main: 0 262144 writecache p 253:4 253:3 4096 0 foo-fast: 0 65536 linear 259:0 2048 $ lvchange -an foo/main $ lvconvert --splitcache foo/main $ lvs -a foo -o+devices LV VG Attr LSize Devices fast foo -wi------- 32.00m /dev/pmem0(0) main foo -wi------- 128.00m /dev/loop0(0)
2018-08-27 22:53:09 +03:00
---
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
lvconvert --type cache --cachevol LV LV_linear_striped_raid_thinpool
OO: --cache, OO_LVCONVERT_CACHE, OO_LVCONVERT, --poolmetadatasize SizeMB, --chunksize SizeKB
ID: lvconvert_to_cache_with_cachevol
DESC: Attach a cache to an LV, converts the LV to type cache.
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
lvconvert: allow --cache shortcut for --type cache with cachevol
2019-09-23 19:07:12 +03:00
# alternate form of lvconvert --type cache
lvconvert --cache --cachevol LV LV_linear_striped_raid_thinpool
OO: OO_LVCONVERT_CACHE, OO_LVCONVERT, --poolmetadatasize SizeMB, --chunksize SizeKB
ID: lvconvert_to_cache_with_cachevol
DESC: Attach a cache to an LV, converts the LV to type cache.
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
lvconvert: allow --cache shortcut for --type cache with cachevol
2019-09-23 19:07:12 +03:00
FLAGS: SECONDARY_SYNTAX
Use "cachevol" to refer to cache on a single LV and "cachepool" to refer to a cache on a cache pool object. The problem was that the --cachepool option was being used to refer to both a cache pool object, and to a standard LV used for caching. This could be somewhat confusing, and it made it less clear when each kind would be used. By separating them, it's clear when a cachepool or a cachevol should be used. Previously: - lvm would use the cache pool approach when the user passed a cache-pool LV to the --cachepool option. - lvm would use the cache vol approach when the user passed a standard LV in the --cachepool option. Now: - lvm will always use the cache pool approach when the user uses the --cachepool option. - lvm will always use the cache vol approach when the user uses the --cachevol option.
2019-01-30 18:55:34 +03:00
---
cachevol: add LV type restrictions to command defs LV type restrictions were missed on the command definitions.
2020-07-23 23:10:35 +03:00
lvconvert --type writecache --cachedevice PV LV_linear_striped_raid
lvconvert: single step cachevol creation and attachment To add a cache or writecache to a main LV with a single command: lvconvert --type cache|writecache --cachedevice /dev/ssd vg/main A cachevol LV will be allocated from the specified cache device, then attached to the main LV. Include --cachesize to specify the size of cachevol to create, otherwise the entire cachedevice is used. The cachedevice option can be repeated to create a cachevol from multiple devices. Example ------- A user has an existing main LV that they want to speed up using a new ssd. user adds the new ssd to the VG: $ vgextend vg /dev/ssd user attaches the new ssd their main LV: $ lvconvert --type writecache --cachedevice /dev/ssd vg/main Example ------- A user has two existing main LVs that they want to speed up with a new ssd. user adds the new 16G ssd to the VG: $ vgextend vg /dev/ssd user attaches some of the new ssd to the first main LV, using half of the space: $ lvconvert --type writecache --cachedevice /dev/ssd --cachesize 8G vg/main1 user attaches some of the new ssd to the second main LV, using the other half of the space: $ lvconvert --type writecache --cachedevice /dev/ssd --cachesize 8G vg/main2 Example ------- A user has an existing main LV that they want to speed up using two new ssds. user adds the new two ssds the VG: $ vgextend vg /dev/ssd1 $ vgextend vg /dev/ssd2 user attaches both ssds their main LV: $ lvconvert --type writecache --cachedevice /dev/ssd1 --cachedevice /dev/ssd2 vg/main
2020-02-05 22:42:36 +03:00
OO: OO_LVCONVERT, --cachesize SizeMB, --cachesettings String
ID: lvconvert_to_writecache_with_device
DESC: Add a writecache to an LV, using a specified cache device.
RULE: all and lv_is_visible
cachevol: add LV type restrictions to command defs LV type restrictions were missed on the command definitions.
2020-07-23 23:10:35 +03:00
lvconvert --type cache --cachedevice PV LV_linear_striped_raid_thinpool
lvconvert: chunksize option was missing with cachedevice
2021-01-07 22:30:48 +03:00
OO: OO_LVCONVERT, --cachesize SizeMB, --cachesettings String, --chunksize SizeKB
lvconvert: single step cachevol creation and attachment To add a cache or writecache to a main LV with a single command: lvconvert --type cache|writecache --cachedevice /dev/ssd vg/main A cachevol LV will be allocated from the specified cache device, then attached to the main LV. Include --cachesize to specify the size of cachevol to create, otherwise the entire cachedevice is used. The cachedevice option can be repeated to create a cachevol from multiple devices. Example ------- A user has an existing main LV that they want to speed up using a new ssd. user adds the new ssd to the VG: $ vgextend vg /dev/ssd user attaches the new ssd their main LV: $ lvconvert --type writecache --cachedevice /dev/ssd vg/main Example ------- A user has two existing main LVs that they want to speed up with a new ssd. user adds the new 16G ssd to the VG: $ vgextend vg /dev/ssd user attaches some of the new ssd to the first main LV, using half of the space: $ lvconvert --type writecache --cachedevice /dev/ssd --cachesize 8G vg/main1 user attaches some of the new ssd to the second main LV, using the other half of the space: $ lvconvert --type writecache --cachedevice /dev/ssd --cachesize 8G vg/main2 Example ------- A user has an existing main LV that they want to speed up using two new ssds. user adds the new two ssds the VG: $ vgextend vg /dev/ssd1 $ vgextend vg /dev/ssd2 user attaches both ssds their main LV: $ lvconvert --type writecache --cachedevice /dev/ssd1 --cachedevice /dev/ssd2 vg/main
2020-02-05 22:42:36 +03:00
ID: lvconvert_to_cache_with_device
DESC: Add a cache to an LV, using a specified cache device.
RULE: all and lv_is_visible
---
pool: allow data on zero and error segtypes Renables usage of --type zero and --type error LVs to serve as backend for _tdata device. Clearly not very useful in practice, as it can't store any real data, but usable for some testing and some sort of perfomance checking. lvcreate --type zero -L1T -n pool vg lvconvert --thinpool vg/pool Will create a thin-pool with zero device backend.
2021-03-17 20:26:08 +03:00
lvconvert --type thin-pool LV_linear_striped_raid_cache_error_zero
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --stripes_long Number, --stripesize SizeKB,
lvconvert: thin errorwhenfull and recalculation When converting an existing LV to thin-pool, user may now pass also '--errorwhenfull' option like with 'lvcreate'. Also recalculate chunksize when performace profile is used with conversion (again matching lvcreate). Adds missing flagging for uncropped metadata sizes.
2021-02-17 02:10:32 +03:00
OO_LVCONVERT_THIN, OO_LVCONVERT_POOL, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_to_thinpool
DESC: Convert LV to type thin-pool.
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_origin lv_is_merging_origin lv_is_external_origin lv_is_virtual lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert: include swap behavior in generic pool syntax For this syntax: lvconvert --thinpool LV1 --poolmetadata LV2 lvconvert --cachepool LV1 --poolmetadata LV2 Restore the metadata swapping behavior in addition to the pool creation behavior. When LV1 is already a pool, the metadata LV will be swapped with LV2. When LV1 is not a pool, it will be converted to a pool using the specified LV for metadata. This syntax is no longer advertised because of the ambiguous behavior. The primary syntaxes for pool creation and metadata swapping will be the advertised methods.
2017-02-17 20:45:13 +03:00
# This command syntax has two different meanings depending on
# whether the LV pos arg is already a thin pool or not.
#
# 1. When the LV arg is not a pool, this command converts
# the LV into a pool, optionally using a specified meta LV.
# This is an alternate form of the primary command:
# lvconvert --type thin-pool LV
#
# 2. When the LV is is already a pool and a meta LV is specified,
# the meta LV is swapped. Swapping a meta LV is a very specialized
# operation that users should never use.
# This is an alternate form of the primary command:
# lvconvert --swapmetadata --poolmetadata LV LV
#
# The command def cannot include --poolmetadata as a required
# option, otherwise 1 would not pass, so the validation of
# this option cannot be done by the command defs, but has to
# be done ad hoc in the lvconvert implementation.
#
# This command syntax is deprecated, and the primary forms
# of creating a pool or swapping metadata should be used.
lvconvert --thinpool LV_linear_striped_raid_cache_thinpool
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type thin-pool, --stripes_long Number, --stripesize SizeKB,
lvconvert: thin errorwhenfull and recalculation When converting an existing LV to thin-pool, user may now pass also '--errorwhenfull' option like with 'lvcreate'. Also recalculate chunksize when performace profile is used with conversion (again matching lvcreate). Adds missing flagging for uncropped metadata sizes.
2021-02-17 02:10:32 +03:00
OO_LVCONVERT_THIN, OO_LVCONVERT_POOL, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
lvconvert: include swap behavior in generic pool syntax For this syntax: lvconvert --thinpool LV1 --poolmetadata LV2 lvconvert --cachepool LV1 --poolmetadata LV2 Restore the metadata swapping behavior in addition to the pool creation behavior. When LV1 is already a pool, the metadata LV will be swapped with LV2. When LV1 is not a pool, it will be converted to a pool using the specified LV for metadata. This syntax is no longer advertised because of the ambiguous behavior. The primary syntaxes for pool creation and metadata swapping will be the advertised methods.
2017-02-17 20:45:13 +03:00
ID: lvconvert_to_thinpool_or_swap_metadata
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Convert LV to type thin-pool (variant, use --type thin-pool).
DESC: Swap metadata LV in a thin pool (variant, use --swapmetadata).
lvconvert: include swap behavior in generic pool syntax For this syntax: lvconvert --thinpool LV1 --poolmetadata LV2 lvconvert --cachepool LV1 --poolmetadata LV2 Restore the metadata swapping behavior in addition to the pool creation behavior. When LV1 is already a pool, the metadata LV will be swapped with LV2. When LV1 is not a pool, it will be converted to a pool using the specified LV for metadata. This syntax is no longer advertised because of the ambiguous behavior. The primary syntaxes for pool creation and metadata swapping will be the advertised methods.
2017-02-17 20:45:13 +03:00
FLAGS: PREVIOUS_SYNTAX
lvconvert: fix converting hidden lv to pool A hidden LV can not be converted to a thin pool or cache pool.
2017-04-05 00:47:47 +03:00
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert --type cache-pool LV_linear_striped_raid
commands: include lvconvert cache options as group
2017-02-28 22:47:46 +03:00
OO: OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvconvert_to_cachepool
DESC: Convert LV to type cache-pool.
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert: include swap behavior in generic pool syntax For this syntax: lvconvert --thinpool LV1 --poolmetadata LV2 lvconvert --cachepool LV1 --poolmetadata LV2 Restore the metadata swapping behavior in addition to the pool creation behavior. When LV1 is already a pool, the metadata LV will be swapped with LV2. When LV1 is not a pool, it will be converted to a pool using the specified LV for metadata. This syntax is no longer advertised because of the ambiguous behavior. The primary syntaxes for pool creation and metadata swapping will be the advertised methods.
2017-02-17 20:45:13 +03:00
# This command syntax has two different meanings depending on
# whether the LV pos arg is already a cache pool or not.
#
# 1. When the LV arg is not a pool, this command converts
# the LV into a pool, optionally using a specified meta LV.
# This is an alternate form of the primary command:
# lvconvert --type cache-pool LV
#
# 2. When the LV is is already a pool and a meta LV is specified,
# the meta LV is swapped. Swapping a meta LV is a very specialized
# operation that users should never use.
# This is an alternate form of the primary command:
# lvconvert --swapmetadata --poolmetadata LV LV
#
# The command def cannot include --poolmetadata as a required
# option, otherwise 1 would not pass, so the validation of
# this option cannot be done by the command defs, but has to
# be done ad hoc in the lvconvert implementation.
#
# This command syntax is deprecated, and the primary forms
# of creating a pool or swapping metadata should be used.
pool: allow data on zero and error segtypes Renables usage of --type zero and --type error LVs to serve as backend for _tdata device. Clearly not very useful in practice, as it can't store any real data, but usable for some testing and some sort of perfomance checking. lvcreate --type zero -L1T -n pool vg lvconvert --thinpool vg/pool Will create a thin-pool with zero device backend.
2021-03-17 20:26:08 +03:00
lvconvert --cachepool LV_linear_striped_raid_cachepool_error_zero
commands: include lvconvert cache options as group
2017-02-28 22:47:46 +03:00
OO: --type cache-pool, OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
OP: PV ...
lvconvert: include swap behavior in generic pool syntax For this syntax: lvconvert --thinpool LV1 --poolmetadata LV2 lvconvert --cachepool LV1 --poolmetadata LV2 Restore the metadata swapping behavior in addition to the pool creation behavior. When LV1 is already a pool, the metadata LV will be swapped with LV2. When LV1 is not a pool, it will be converted to a pool using the specified LV for metadata. This syntax is no longer advertised because of the ambiguous behavior. The primary syntaxes for pool creation and metadata swapping will be the advertised methods.
2017-02-17 20:45:13 +03:00
ID: lvconvert_to_cachepool_or_swap_metadata
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Convert LV to type cache-pool (variant, use --type cache-pool).
DESC: Swap metadata LV in a cache pool (variant, use --swapmetadata).
lvconvert: include swap behavior in generic pool syntax For this syntax: lvconvert --thinpool LV1 --poolmetadata LV2 lvconvert --cachepool LV1 --poolmetadata LV2 Restore the metadata swapping behavior in addition to the pool creation behavior. When LV1 is already a pool, the metadata LV will be swapped with LV2. When LV1 is not a pool, it will be converted to a pool using the specified LV for metadata. This syntax is no longer advertised because of the ambiguous behavior. The primary syntaxes for pool creation and metadata swapping will be the advertised methods.
2017-02-17 20:45:13 +03:00
FLAGS: PREVIOUS_SYNTAX
lvconvert: fix converting hidden lv to pool A hidden LV can not be converted to a thin pool or cache pool.
2017-04-05 00:47:47 +03:00
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_raid_with_integrity
commands: add rule for lvconvert commands that create pools For an lvconvert command that creates a thin pool or cache pool, --poolmetadata cannot be used with --readahead, --stripes or --stripesize.
2017-04-12 21:33:40 +03:00
RULE: --poolmetadata not --readahead --stripesize --stripes_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert: support to convert lv into vdopool Support: lvconvert --type vdo-pool vg/lv lvconvert --vdopool vg/lv --virtualsize 10G
2018-07-01 00:38:49 +03:00
lvconvert --type vdo-pool LV_linear_striped_raid_cache
lvconvert: vdo may convert already formated vdo User use 'lvconvert -Zn --type vdo-pool' to convert an existing vdo formated volume and skip lvm2 internal formating. This however requires user is passing proper matching parameters. For them user can use --profile|--metadataprofile option whos support has been also enhanced. TODO: add support to read values directly from formated volume.
2021-02-16 23:26:35 +03:00
OO: --name LV_new, --virtualsize SizeMB, OO_LVCONVERT_VDO, OO_LVCONVERT
lvconvert: support to convert lv into vdopool Support: lvconvert --type vdo-pool vg/lv lvconvert --vdopool vg/lv --virtualsize 10G
2018-07-01 00:38:49 +03:00
ID: lvconvert_to_vdopool
DESC: Convert LV to type vdopool.
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_origin lv_is_merging_origin lv_is_external_origin lv_is_virtual lv_is_raid_with_integrity
lvconvert: support to convert lv into vdopool Support: lvconvert --type vdo-pool vg/lv lvconvert --vdopool vg/lv --virtualsize 10G
2018-07-01 00:38:49 +03:00
lvconvert --vdopool LV_linear_striped_raid_cache
command defs: add missing commas even though the parser seems to work fine without them
2021-02-22 19:44:01 +03:00
OO: --type vdo-pool, OO_LVCONVERT_VDO, OO_LVCONVERT, --name LV_new, --virtualsize SizeMB,
lvconvert: support to convert lv into vdopool Support: lvconvert --type vdo-pool vg/lv lvconvert --vdopool vg/lv --virtualsize 10G
2018-07-01 00:38:49 +03:00
ID: lvconvert_to_vdopool_param
DESC: Convert LV to type vdopool.
RULE: all and lv_is_visible
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
RULE: all not lv_is_locked lv_is_origin lv_is_merging_origin lv_is_external_origin lv_is_virtual lv_is_raid_with_integrity
lvconvert: support to convert lv into vdopool Support: lvconvert --type vdo-pool vg/lv lvconvert --vdopool vg/lv --virtualsize 10G
2018-07-01 00:38:49 +03:00
FLAGS: SECONDARY_SYNTAX
---
vdo: enable caching for vdopool LV and vdo LV Allow using caching with VDO. User can either cache a single vdopool or a vdo LV - difference when the caching is put-in depends on a use-case and it's upto user to decide which kind of speed is expected.
2019-01-24 16:12:26 +03:00
lvconvert --splitcache LV_cachepool_cache_thinpool_vdopool_writecache
writecache: use two step detach When detaching a writecache, use the cleaner setting by default to writeback data prior to suspending the lv to detach the writecache. This avoids potentially blocking for a long period with the device suspended. Detaching a writecache first sets the cleaner option, waits for a short period of time (less than a second), and checks if the writecache has quickly become clean. If so, the writecache is detached immediately. This optimizes the case where little writeback is needed. If the writecache does not quickly become clean, then the detach command leaves the writecache attached with the cleaner option set. This leaves the LV in the same state as if the user had set the cleaner option directly with lvchange --cachesettings cleaner=1 LV. After leaving the LV with the cleaner option set, the detach command will wait and watch the writeback progress, and will finally detach the writecache when the writeback is finished. The detach command does not need to wait during the writeback phase, and can be canceled, in which case the LV will remain with the writecache attached and the cleaner option set. When the user runs the detach command again it will complete the detach. To detach a writecache directly, without using the cleaner step (which has been the approach previously), add the option --cachesettings cleaner=0 to the detach command.
2020-06-11 21:33:40 +03:00
OO: OO_LVCONVERT, --cachesettings String
Add dm-writecache support dm-writecache is used like dm-cache with a standard LV as the cache. $ lvcreate -n main -L 128M -an foo /dev/loop0 $ lvcreate -n fast -L 32M -an foo /dev/pmem0 $ lvconvert --type writecache --cachepool fast foo/main $ lvs -a foo -o+devices LV VG Attr LSize Origin Devices [fast] foo -wi------- 32.00m /dev/pmem0(0) main foo Cwi------- 128.00m [main_wcorig] main_wcorig(0) [main_wcorig] foo -wi------- 128.00m /dev/loop0(0) $ lvchange -ay foo/main $ dmsetup table foo-main_wcorig: 0 262144 linear 7:0 2048 foo-main: 0 262144 writecache p 253:4 253:3 4096 0 foo-fast: 0 65536 linear 259:0 2048 $ lvchange -an foo/main $ lvconvert --splitcache foo/main $ lvs -a foo -o+devices LV VG Attr LSize Devices fast foo -wi------- 32.00m /dev/pmem0(0) main foo -wi------- 128.00m /dev/loop0(0)
2018-08-27 22:53:09 +03:00
ID: lvconvert_split_and_keep_cache
DESC: Detach a cache from an LV.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
vdo: enable caching for vdopool LV and vdo LV Allow using caching with VDO. User can either cache a single vdopool or a vdo LV - difference when the caching is put-in depends on a use-case and it's upto user to decide which kind of speed is expected.
2019-01-24 16:12:26 +03:00
lvconvert --uncache LV_cache_thinpool_vdopool_writecache
writecache: use two step detach When detaching a writecache, use the cleaner setting by default to writeback data prior to suspending the lv to detach the writecache. This avoids potentially blocking for a long period with the device suspended. Detaching a writecache first sets the cleaner option, waits for a short period of time (less than a second), and checks if the writecache has quickly become clean. If so, the writecache is detached immediately. This optimizes the case where little writeback is needed. If the writecache does not quickly become clean, then the detach command leaves the writecache attached with the cleaner option set. This leaves the LV in the same state as if the user had set the cleaner option directly with lvchange --cachesettings cleaner=1 LV. After leaving the LV with the cleaner option set, the detach command will wait and watch the writeback progress, and will finally detach the writecache when the writeback is finished. The detach command does not need to wait during the writeback phase, and can be canceled, in which case the LV will remain with the writecache attached and the cleaner option set. When the user runs the detach command again it will complete the detach. To detach a writecache directly, without using the cleaner step (which has been the approach previously), add the option --cachesettings cleaner=0 to the detach command.
2020-06-11 21:33:40 +03:00
OO: OO_LVCONVERT, --cachesettings String
Add dm-writecache support dm-writecache is used like dm-cache with a standard LV as the cache. $ lvcreate -n main -L 128M -an foo /dev/loop0 $ lvcreate -n fast -L 32M -an foo /dev/pmem0 $ lvconvert --type writecache --cachepool fast foo/main $ lvs -a foo -o+devices LV VG Attr LSize Origin Devices [fast] foo -wi------- 32.00m /dev/pmem0(0) main foo Cwi------- 128.00m [main_wcorig] main_wcorig(0) [main_wcorig] foo -wi------- 128.00m /dev/loop0(0) $ lvchange -ay foo/main $ dmsetup table foo-main_wcorig: 0 262144 linear 7:0 2048 foo-main: 0 262144 writecache p 253:4 253:3 4096 0 foo-fast: 0 65536 linear 259:0 2048 $ lvchange -an foo/main $ lvconvert --splitcache foo/main $ lvs -a foo -o+devices LV VG Attr LSize Devices fast foo -wi------- 32.00m /dev/pmem0(0) main foo -wi------- 128.00m /dev/loop0(0)
2018-08-27 22:53:09 +03:00
ID: lvconvert_split_and_remove_cache
DESC: Detach and delete a cache from an LV.
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
lvconvert --swapmetadata --poolmetadata LV LV_thinpool_cachepool
OO: --chunksize SizeKB, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvconvert_swap_pool_metadata
lvconvert: use command defs for thin/cache/pool creation Everything related to thin and cache.
2016-12-07 23:30:57 +03:00
DESC: Swap metadata LV in a thin pool or cache pool (for repair only).
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
# lvconvert --merge is an extremely ambiguous command.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# It can do very different operations, but which one depends
# on knowing the LV type. So, the command doesn't know what
# it's actually doing until quite late, when processing a
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
# single LV. When passed a VG or tag, it will do different
# operations on each LV it finds, depending on the current LV type.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --merge LV_linear_striped_raid_thin_snapshot|VG|Tag ...
OO: --background, --interval Number, OO_LVCONVERT
ID: lvconvert_merge
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Merge LV that was split from a mirror (variant, use --mergemirrors).
DESC: Merge thin LV into its origin LV (variant, use --mergethin).
DESC: Merge COW snapshot LV into its origin (variant, use --mergesnapshot).
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow
FLAGS: SECONDARY_SYNTAX
---
lvconvert --mergethin LV_thin ...
OO: OO_LVCONVERT
ID: lvconvert_merge_thin
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
DESC: Merge thin LV into its origin LV.
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
RULE: all and lv_is_visible
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
---
# lvconvert snapshot-related utilities
# Create a new command set for these and migrate them out of lvconvert?
lvconvert --mergesnapshot LV_snapshot ...
OO: --background, --interval Number, OO_LVCONVERT
ID: lvconvert_merge_snapshot
lvconvert: use command defs for mergemirrors and route the generic --merge to one of the specific merge functions
2016-12-09 23:39:57 +03:00
DESC: Merge COW snapshot LV into its origin.
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow
RULE: all and lv_is_visible
---
lvconvert --splitsnapshot LV_snapshot
OO: OO_LVCONVERT
ID: lvconvert_split_cow_snapshot
DESC: Separate a COW snapshot from its origin LV.
RULE: all not lv_is_locked lv_is_pvmove lv_is_origin lv_is_external_origin lv_is_merging_cow
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
# NB: an unsual use of position args here, the first pos arg
# (will become origin LV) is not passed to process_each,
# the second pos arg (will become cow LV) is given to
# process_each. Because the first pos LV is not handled
# by process_each_lv, it cannot be checked against this
# command def, so a specific LV type in the first pos
# will not be checked.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvconvert --snapshot
lvconvert: accept striped LV as snapshot COW LV Restore back acceptance of striped LV to be valid COW LV.
2018-03-17 16:01:09 +03:00
lvconvert --type snapshot LV LV_linear_striped
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --snapshot, --chunksize SizeKB, --zero Bool, OO_LVCONVERT
ID: lvconvert_combine_split_snapshot
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
DESC: Combine a former COW snapshot (second arg) with a former
DESC: origin LV (first arg) to reverse a splitsnapshot command.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all and lv_is_visible
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert: accept striped LV as snapshot COW LV Restore back acceptance of striped LV to be valid COW LV.
2018-03-17 16:01:09 +03:00
lvconvert --snapshot LV LV_linear_striped
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type snapshot, --chunksize SizeKB, --zero Bool, OO_LVCONVERT
ID: lvconvert_combine_split_snapshot
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
DESC: Combine a former COW snapshot (second arg) with a former
DESC: origin LV (first arg) to reverse a splitsnapshot command.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all and lv_is_visible
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
# lvconvert repair/replace utilitiles
# Create a new command set for these and migrate them out of lvconvert?
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# FIXME: use specific option names to distinguish these two
# very different commands, e.g.
#
# lvconvert --repair-pvs LV_raid_mirror
# DESC: Replace failed PVs in a raid or mirror LV.
#
# lvconvert --repair-thinpool LV_thinpool
# DESC: Repair a thin pool.
#
lvconvert: support repair of cache/cachepool Extend repair for cache and cachepool target and user 'lvconvert_repair' routine name.
2017-09-18 12:33:47 +03:00
# lvconvert --repair-cache LV_cache
# DESC: Repair a cache.
#
# lvconvert --repair-cachepool LV_cachepool
# DESC: Repair a cachepool.
#
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# lvm may want to do different things, or allow different options
# depending on which operation is being run, but as it stands, it
# cannot do anything operation-specific until after the VG is read
# and the LV type is known.
lvconvert: support repair of cache/cachepool Extend repair for cache and cachepool target and user 'lvconvert_repair' routine name.
2017-09-18 12:33:47 +03:00
lvconvert --repair LV_cache_cachepool_mirror_raid_thinpool
lvconvert: repair supports poometadatespare switch Enable handling of --poolmetadataspare so if user can prevent creation of _pmspare volume during --repair operation (just like during actual lvcreate or lvconvert) for pool volumes.
2017-09-13 12:48:15 +03:00
OO: --usepolicies, --interval Number, --poolmetadataspare Bool, OO_LVCONVERT
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
lvconvert: support repair of cache/cachepool Extend repair for cache and cachepool target and user 'lvconvert_repair' routine name.
2017-09-18 12:33:47 +03:00
ID: lvconvert_repair
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
DESC: Replace failed PVs in a raid or mirror LV.
DESC: Repair a thin pool.
lvconvert: support repair of cache/cachepool Extend repair for cache and cachepool target and user 'lvconvert_repair' routine name.
2017-09-18 12:33:47 +03:00
DESC: Repair a cache pool.
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
RULE: all not lv_is_locked lv_is_pvmove
improve error messages when command rules fail When certain cmd def RULE's fail, the error messages can sometimes be confusing. This expands the error messages to help clarify why the rule failed, especially in cases where options are used incorrectly.
2017-09-20 18:51:52 +03:00
RULE: --poolmetadataspare and LV_cache LV_cachepool LV_thinpool
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvconvert --replace PV LV_raid
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_replace_pv
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Replace specific PV(s) in a raid LV with another PV.
lvconvert: snapshot: use command definitions Lift all the snapshot utilities (merge, split, combine) out of the monolithic lvconvert implementation, using the command definitions. The old code associated with these commands is now unused and will be removed separately.
2016-11-18 22:16:04 +03:00
RULE: all not lv_is_locked lv_is_pvmove
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
lvconvert: add startpoll command using command def This is a new explicit version of 'lvconvert LV' which has been an obscure way of triggering polling to be restarted on an LV that was previously converted.
2016-12-20 00:38:03 +03:00
# This command just (re)starts the polling process on the LV
# to continue a previous conversion.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fixes for recent raid changes - Combine the equivalent lvconvert --type raid defs. (Two cmd defs must be different without relying on LV type, which are not known at the time the cmd def is matched.) - Remove unused optional options from lvconvert --stripes, and lvconvert --stripesize. - Use Number for --stripes_long val type. - Combine the cmd def for raid reshape cleanup into the existing start_poll cmd def (they were duplicate defs). Calls into the raid code from a poll opertion will be added.
2017-02-25 01:43:05 +03:00
lvconvert --startpoll LV_mirror_raid
lvconvert: add startpoll command using command def This is a new explicit version of 'lvconvert LV' which has been an obscure way of triggering polling to be restarted on an LV that was previously converted.
2016-12-20 00:38:03 +03:00
OO: OO_LVCONVERT
ID: lvconvert_start_poll
DESC: Poll LV to continue conversion.
RULE: all and lv_is_converting
# alternate form of lvconvert --startpoll, this is only kept
# for compat since this was how it used to be done.
commands: fixes for recent raid changes - Combine the equivalent lvconvert --type raid defs. (Two cmd defs must be different without relying on LV type, which are not known at the time the cmd def is matched.) - Remove unused optional options from lvconvert --stripes, and lvconvert --stripesize. - Use Number for --stripes_long val type. - Combine the cmd def for raid reshape cleanup into the existing start_poll cmd def (they were duplicate defs). Calls into the raid code from a poll opertion will be added.
2017-02-25 01:43:05 +03:00
lvconvert LV_mirror_raid
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: OO_LVCONVERT
lvconvert: restrict command matching for no option variant The 'lvconvert LV' command def has caused multiple problems for command matching because it matches the required options of any lvconvert command. Any lvconvert with incorrect options ends up matching 'lvconvert LV', which then produces an error about incorrect options being used for 'lvconvert LV'. This prevents suggestions from nearest-command partial command matches. Add a special case for 'lvconvert LV' so that it won't be used as a partial match for a command that has options specified.
2018-07-23 19:08:12 +03:00
ID: lvconvert_plain
lvconvert: drop limitation for converting lv Fixing regresion on argument acceptance where any lv can be passed with paramaterless lvconvert which is meant to figure out needed operation - i.e. wait for mirror synchronization. User has no other 'effective' method to wait for mirror getting in-sync.
2018-04-18 13:57:17 +03:00
DESC: Poll LV to continue conversion (also see --startpoll)
DESC: or waits till conversion/mirror syncing is finished
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
---
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
lvconvert --raidintegrity Bool LV_raid
OO: --raidintegritymode String, --raidintegrityblocksize Number, OO_LVCONVERT
OP: PV ...
ID: lvconvert_integrity
DESC: Add or remove data integrity checksums to raid images.
---
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# --extents is not specified; it's an automatic alternative for --size
OO_LVCREATE: --addtag Tag, --alloc Alloc, --autobackup Bool, --activate Active,
--contiguous Bool, --ignoreactivationskip, --ignoremonitoring, --major Number,
--metadataprofile String, --minor Number, --monitor Bool, --name String, --nosync,
--noudevsync, --permission Permission, --persistent Bool, --readahead Readahead,
--reportformat ReportFmt, --setactivationskip Bool, --wipesignatures Bool,
--zero Bool
lvcreate: allow chunksize option when creating cache
2017-03-02 22:58:27 +03:00
OO_LVCREATE_CACHE: --cachemode CacheMode, --cachepolicy String, --cachesettings String,
cache: allow to specify cachemetadataformat OO_LVCREATE_CACHE accepts --cachemetadataformat. Support new option --cachemetadataformat auto|1|2 for caching. Word 'auto' can be also be given as '0'.
2017-03-03 13:33:10 +03:00
--chunksize SizeKB, --cachemetadataformat CacheMetadataFormat
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
OO_LVCREATE_POOL: --poolmetadatasize SizeMB, --poolmetadataspare Bool, --chunksize SizeKB
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO_LVCREATE_THIN: --discards Discards, --errorwhenfull Bool
lvcreate: vdo support Supports basic: 'lvcreate --vdo -LXXXG -VYYYG vg/vdoname -n lvname' Allows to create basic VDO pool volume and virtual VDO volume.
2018-06-29 14:16:08 +03:00
OO_LVCREATE_VDO: --compression Bool, --deduplication Bool
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type error --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: OO_LVCREATE
ID: lvcreate_error_vol
DESC: Create an LV that returns errors when used.
FLAGS: SECONDARY_SYNTAX
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type zero --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: OO_LVCREATE
ID: lvcreate_zero_vol
DESC: Create an LV that returns zeros when read.
FLAGS: SECONDARY_SYNTAX
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type linear --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: OO_LVCREATE
OP: PV ...
IO: --mirrors 0, --stripes 1
ID: lvcreate_linear
DESC: Create a linear LV.
FLAGS: SECONDARY_SYNTAX
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type linear, OO_LVCREATE
OP: PV ...
IO: --mirrors 0, --stripes 1
ID: lvcreate_linear
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Create a linear LV.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
# all lvcreate combinations of:
# a) --type striped
# b) --type mirror
# c) --type raid<N>
# d) --stripes
# e) --mirrors
#
# R1. a: striped with default stripes
# R2. a,d: striped with specified stripes
# R3. a,e: NA
# R4. a,d,e: NA
#
# R5. b: mirror with default mirrors
# R6. b,d: NA
# R7. b,e: mirror with specified mirrors
# R8. b,d,e: NA
#
# R9. c: raid<N> with default stripes/mirrors
# R10. c,d: raid<N> with specified stripes
# R11. c,e: raid<N> with specified mirrors
# R12. c,d,e: raid10 with specified stripes and mirrors
#
# R13. d: striped with specified stripes
# R14. e: mirror with specified mirrors
# R15. d,e: raid10 with specified mirrors
# R1,R2 (--type striped with or without --stripes)
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type striped --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --stripes Number, --stripesize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_striped
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a striped LV (also see lvcreate --stripes).
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
# R13 (just --stripes)
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --stripes Number --size SizeMB VG
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
OO: --stripesize SizeKB, OO_LVCREATE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvcreate_striped
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a striped LV (infers --type striped).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
# R5,R7 (--type mirror with or without --mirrors)
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type mirror --size SizeMB VG
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
OO: --mirrors PNumber, --mirrorlog MirrorLog, --regionsize RegionSize,
--stripes Number, --stripesize SizeKB, OO_LVCREATE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvcreate_mirror
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a mirror LV (also see --type raid1).
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
# R14 (just --mirrors)
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvcreate --type raid1|mirror
commands: use correct relative signs with mirror option As was recently done with relative signes for sizes/extents, limit the signs used with the mirrors option, e.g. lvcreate --mirrors now does not accept or advertise an optional minus sign with the value. lvconvert --mirrors accepts +|-.
2017-03-11 00:22:13 +03:00
lvcreate --mirrors PNumber --size SizeMB VG
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
OO: --mirrorlog MirrorLog, --regionsize RegionSize, --minrecoveryrate SizeKB, --maxrecoveryrate SizeKB, OO_LVCREATE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvcreate_mirror_or_raid1
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a raid1 or mirror LV (infers --type raid1|mirror).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
# R9,R10,R11,R12 (--type raid with any use of --stripes/--mirrors)
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type raid --size SizeMB VG
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
OO: --mirrors PNumber, --stripes Number, --stripesize SizeKB,
Allow dm-integrity to be used for raid images dm-integrity stores checksums of the data written to an LV, and returns an error if data read from the LV does not match the previously saved checksum. When used on raid images, dm-raid will correct the error by reading the block from another image, and the device user sees no error. The integrity metadata (checksums) are stored on an internal LV allocated by lvm for each linear image. The internal LV is allocated on the same PV as the image. Create a raid LV with an integrity layer over each raid image (for raid levels 1,4,5,6,10): lvcreate --type raidN --raidintegrity y [options] Add an integrity layer to images of an existing raid LV: lvconvert --raidintegrity y LV Remove the integrity layer from images of a raid LV: lvconvert --raidintegrity n LV Settings Use --raidintegritymode journal|bitmap (journal is default) to configure the method used by dm-integrity to ensure crash consistency. Initialization When integrity is added to an LV, the kernel needs to initialize the integrity metadata/checksums for all blocks in the LV. The data corruption checking performed by dm-integrity will only operate on areas of the LV that are already initialized. The progress of integrity initialization is reported by the "syncpercent" LV reporting field (and under the Cpy%Sync lvs column.) Example: create a raid1 LV with integrity: $ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB. Logical volume "rr_rimage_0_imeta" created. Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB. Logical volume "rr_rimage_1_imeta" created. Logical volume "rr" created. $ lvs -a foo LV VG Attr LSize Origin Cpy%Sync rr foo rwi-a-r--- 1.00g 4.93 [rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02 [rr_rimage_0_imeta] foo ewi-ao---- 12.00m [rr_rimage_0_iorig] foo -wi-ao---- 1.00g [rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45 [rr_rimage_1_imeta] foo ewi-ao---- 12.00m [rr_rimage_1_iorig] foo -wi-ao---- 1.00g [rr_rmeta_0] foo ewi-aor--- 4.00m [rr_rmeta_1] foo ewi-aor--- 4.00m
2019-11-21 01:07:27 +03:00
--regionsize RegionSize, --minrecoveryrate SizeKB, --maxrecoveryrate SizeKB,
--raidintegrity Bool, --raidintegritymode String, --raidintegrityblocksize Number, OO_LVCREATE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvcreate_raid_any
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Create a raid LV (a specific raid level must be used, e.g. raid1).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
commands: fix lvcreate mirrors/stripes options Systematically outline every combination of: --type striped, --type mirror, --type raid, --mirrors, --stripes and make sure each is assigned to one specific cmd def. This revealed that a new command def is needed for lvcreate that uses both --mirrors and --stripes but no --type option. The use of LVCREATE_RAID shortcut for an option set resulted in mirrors/stripes being included in optional opts set when they were already in the required list.
2017-03-11 00:57:26 +03:00
# R15 (--stripes and --mirrors which implies raid10)
lvcreate --mirrors PNumber --stripes Number --size SizeMB VG
OO: --stripesize SizeKB, --regionsize RegionSize, --minrecoveryrate SizeKB, --maxrecoveryrate SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_raid_any
DESC: Create a raid10 LV.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
# The LV created by these commands actually has type linear or striped,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# not snapshot as specified by the command. If LVs never have type
# snapshot, perhaps "snapshot" should not be considered an LV type, but
# another new LV property?
# alternate form of lvcreate --snapshot
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type snapshot --size SizeMB LV
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --snapshot, --stripes Number, --stripesize SizeKB,
--chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Create a COW snapshot LV of an origin LV
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (also see --snapshot).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --snapshot --size SizeMB LV
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type snapshot, --stripes Number, --stripesize SizeKB,
--chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Create a COW snapshot LV of an origin LV.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
# alternate form of lvcreate --snapshot
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type snapshot --size SizeMB --virtualsize SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --snapshot, --chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot_with_virtual_origin
commands: tweak some descriptions
2017-03-02 01:50:27 +03:00
DESC: Create a sparse COW snapshot LV of a virtual origin LV
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (also see --snapshot).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --snapshot --size SizeMB --virtualsize SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type snapshot, --chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot_with_virtual_origin
DESC: Create a sparse COW snapshot LV of a virtual origin LV.
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type thin-pool --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --thinpool LV_new, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thinpool
DESC: Create a thin pool.
# alternate form of lvcreate --type thin-pool
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --thin --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type thin-pool, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thinpool
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a thin pool (infers --type thin-pool).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
# alternate form of lvcreate --type thin-pool
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --size SizeMB --thinpool LV_new VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --thin, --type thin-pool, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thinpool
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a thin pool named by the --thinpool arg
DESC: (infers --type thin-pool).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
---
# NB. there are no alternate forms of these commands that
# use --cache in place of --type cache-pool, but --cache
# still needs to be listed as an optional addition to
# --type cache-pool.
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type cache-pool --size SizeMB VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE
OP: PV ...
ID: lvcreate_cachepool
DESC: Create a cache pool.
# alternate form of lvcreate --type cache-pool
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type cache-pool --size SizeMB --cachepool LV_new VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE
OP: PV ...
ID: lvcreate_cachepool
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a cache pool named by the --cachepool arg
DESC: (variant, uses --cachepool in place of --name).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
---
lvcreate --type thin --virtualsize SizeMB --thinpool LV_thinpool VG
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in a thin pool.
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvcreate --type thin
lvcreate --type thin --virtualsize SizeMB LV_thinpool
OO: --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in a thin pool named in the first arg
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (variant, also see --thinpool for naming pool).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
# NB. this is the variant which can substitute
# --thin for --type thin, even though --thin is in OO.
# alternate form of lvcreate --type thin
lvcreate --virtualsize SizeMB --thinpool LV_thinpool VG
OO: --type thin, --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: Create a thin LV in a thin pool (infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvcreate --type thin
lvcreate --virtualsize SizeMB LV_thinpool
OO: --type thin, --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in the thin pool named in the first arg
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (variant, infers --type thin, also see --thinpool for
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
DESC: naming pool.)
FLAGS: SECONDARY_SYNTAX
---
lvcreate --type thin LV_thin
OO: --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot
DESC: Create a thin LV that is a snapshot of an existing thin LV.
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvcreate --type thin
lvcreate --thin LV_thin
OO: --type thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot
DESC: Create a thin LV that is a snapshot of an existing thin LV
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
# alternate form of lvcreate --type thin
lvcreate --snapshot LV_thin
OO: --type thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot
DESC: Create a thin LV that is a snapshot of an existing thin LV
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvcreate --type thin --thinpool LV_thinpool LV
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot_of_external
DESC: Create a thin LV that is a snapshot of an external origin LV.
# alternate form of lvcreate --type thin --thinpool LV_thinpool LV
lvcreate --snapshot --thinpool LV_thinpool LV
OO: --type thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot_of_external
DESC: Create a thin LV that is a snapshot of an external origin LV
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (infers --type thin).
commands: SECONDARY flag changes in cmd defs Add/remove the SECONDARY_SYNTAX flag to cmd defs. cmd defs with this flag will be listed under the ADVANCED USAGE man page section, so that the main USAGE section contains the most common commands without distraction. - When multiple cmd defs do the same thing, one variant can be displayed in the first list. - Very advanced, unusual or uncommon commands should be in the second list.
2017-03-01 01:15:11 +03:00
FLAGS: SECONDARY_SYNTAX
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
vdo: complete matching with thin syntax Just like we support for thin-pool syntax: lvcreate --thinpool new_tpoolname -L Size vg add same support logic with for vdo-poo: lvcreate --vdopool new_vpoolname -L Size vg Also move description of syntax bellow thin-pool, so it's correctly ordered in generated man page.
2019-01-28 22:32:42 +03:00
lvcreate --type vdo --size SizeMB VG
OO: --vdo, --vdopool LV_new, OO_LVCREATE, OO_LVCREATE_VDO,
--virtualsize SizeMB, --stripes Number, --stripesize SizeKB,
OP: PV ...
IO: --mirrors 0
ID: lvcreate_vdo_vol
DESC: Create a LV that returns VDO when used.
lvcreate --vdo --size SizeMB VG
OO: --vdopool LV_new, OO_LVCREATE, OO_LVCREATE_VDO,
--virtualsize SizeMB, --stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_vdo_vol
DESC: Create a VDO LV with VDO pool.
FLAGS: SECONDARY_SYNTAX
lvcreate --vdopool LV_new --size SizeMB VG
OO: --vdo, --type vdo, OO_LVCREATE, OO_LVCREATE_VDO,
--virtualsize SizeMB, --stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_vdo_vol
DESC: Create a VDO LV with VDO pool.
FLAGS: SECONDARY_SYNTAX
---
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# stripes option is not intuitive when creating a thin LV,
# but here it applies to creating the new thin pool that
# is used for the thin LV
# FIXME: there are commands here that differ only in that
# one takes LV_new in arg pos 1, and the other takes a VG name
# in arg pos 1. The commands that take LV_new use that
# name as the new name of the pool, but the commands that
# take a VG automatically generate the LV name. The problem
# is that currently the command matching function cannot
# distinguish between an LV name and a VG name being used
# in arg pos 1, so a user-entered command would just match
# the first it finds and not necessarily the correct
# definition. Note that when LV_new is used in arg pos 1,
# it needs to include a VG name, i.e. VG/LV_new
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type thin --virtualsize SizeMB --size SizeMB --thinpool LV_new
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: where the new thin pool is named by the --thinpool arg.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvcreate --type thin
commands: fix combined thin pool and vol create defs Fixes command defs related to creating a new thin pool and then a new thin lv in the new pool. 1. lvcreate --size --virtualsize --thinpool Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool. 2. lvcreate --size --virtualsize --thinpool VG Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool, and one required positional arg: VG. 3. lvcreate --thin --virtualsize --size LV_new|VG This existing def should not accept an optional --type thin, which if used makes it indistinct from another def. 4. lvcreate --size --virtualsize VG This existing def should not accept an optional --type thin or --thin, which if used makes it indistinct from other defs (e.g. 3)
2017-03-21 05:48:22 +03:00
lvcreate --virtualsize SizeMB --size SizeMB --thinpool LV_new
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: where the new thin pool is named by the --thinpool arg
DESC: (variant, infers --type thin).
commands: fix combined thin pool and vol create defs Fixes command defs related to creating a new thin pool and then a new thin lv in the new pool. 1. lvcreate --size --virtualsize --thinpool Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool. 2. lvcreate --size --virtualsize --thinpool VG Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool, and one required positional arg: VG. 3. lvcreate --thin --virtualsize --size LV_new|VG This existing def should not accept an optional --type thin, which if used makes it indistinct from another def. 4. lvcreate --size --virtualsize VG This existing def should not accept an optional --type thin or --thin, which if used makes it indistinct from other defs (e.g. 3)
2017-03-21 05:48:22 +03:00
FLAGS: SECONDARY_SYNTAX
# same as prev but accepts VG pos arg
# alternate form of lvcreate --type thin
lvcreate --virtualsize SizeMB --size SizeMB --thinpool LV_new VG
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: where the new thin pool is named by the --thinpool arg
DESC: (variant, infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
# alternate form of lvcreate --type thin
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type thin --virtualsize SizeMB --size SizeMB LV_new|VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
DESC: where the new thin pool is named in the first arg,
DESC: or the new thin pool name is generated when the first
DESC: arg is a VG name.
FLAGS: SECONDARY_SYNTAX
# alternate form of lvcreate --type thin
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --thin --virtualsize SizeMB --size SizeMB LV_new|VG
commands: fix combined thin pool and vol create defs Fixes command defs related to creating a new thin pool and then a new thin lv in the new pool. 1. lvcreate --size --virtualsize --thinpool Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool. 2. lvcreate --size --virtualsize --thinpool VG Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool, and one required positional arg: VG. 3. lvcreate --thin --virtualsize --size LV_new|VG This existing def should not accept an optional --type thin, which if used makes it indistinct from another def. 4. lvcreate --size --virtualsize VG This existing def should not accept an optional --type thin or --thin, which if used makes it indistinct from other defs (e.g. 3)
2017-03-21 05:48:22 +03:00
OO: OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
DESC: where the new thin pool is named in the first arg,
DESC: or the new thin pool name is generated when the first
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: arg is a VG name (variant, infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --size SizeMB --virtualsize SizeMB VG
commands: fix combined thin pool and vol create defs Fixes command defs related to creating a new thin pool and then a new thin lv in the new pool. 1. lvcreate --size --virtualsize --thinpool Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool. 2. lvcreate --size --virtualsize --thinpool VG Needs a cmd def, it was missing. The def is unique by the three required options: size, virtualsize and thinpool, and one required positional arg: VG. 3. lvcreate --thin --virtualsize --size LV_new|VG This existing def should not accept an optional --type thin, which if used makes it indistinct from another def. 4. lvcreate --size --virtualsize VG This existing def should not accept an optional --type thin or --thin, which if used makes it indistinct from other defs (e.g. 3)
2017-03-21 05:48:22 +03:00
OO: --type snapshot, --snapshot, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_with_thinpool_or_sparse_snapshot
DESC: Create a thin LV, first creating a thin pool for it
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (infers --type thin).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
DESC: Create a sparse snapshot of a virtual origin LV
man: remove hyphen escapes from source they are escaped by running sed in makefile
2017-07-21 00:26:13 +03:00
DESC: (infers --type snapshot).
DESC: Chooses --type thin or --type snapshot according to
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
DESC: config setting sparse_segtype_default.
FLAGS: SECONDARY_SYNTAX
---
# stripes option is not intuitive when creating a cache LV,
# but here it applies to creating the new origin that
# is used to create the cache LV
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type cache --size SizeMB --cachepool LV_cachepool VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
ID: lvcreate_and_attach_cachepool
DESC: Create a new LV, then attach the specified cachepool
DESC: which converts the new LV to type cache.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# alternate form of lvcreate --type cache
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
# (omits the --type cache option which is inferred)
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --size SizeMB --cachepool LV_cachepool VG
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --type cache, --cache, OO_LVCREATE_CACHE, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
ID: lvcreate_and_attach_cachepool_v2
DESC: Create a new LV, then attach the specified cachepool
DESC: which converts the new LV to type cache
DESC: (variant, infers --type cache.)
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
# alternate form of lvcreate --type cache
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
# (moves cachepool from option arg to position arg,
# dropping the normal VG position arg)
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --type cache --size SizeMB LV_cachepool
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
ID: lvcreate_and_attach_cachepool_v3
DESC: Create a new LV, then attach the specified cachepool
DESC: which converts the new LV to type cache.
DESC: (variant, also use --cachepool).
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
# This command has two different meanings which ought to
# have separate command defs, but since the syntax is the
# same for both they have to share one command def with
# an ambiguous meaning. Which command is performed depends
# on whether the LV in the first arg position is a
# cachepool or not (we can't have two different command
# defs that differ only in the type of LV in the arg position
# because when parsing commands we don't know the LV type.)
#
# 1. An alternate form of lvcreate_and_attach_cachepool_v3
# this syntax: lvcreate --cache --size SizeMB LV_cachepool
# is alternative for: lvcreate --type cache --size SizeMB LV_cachepool
#
# 2. An alternative to using lvconvert to convert LV to type cache,
# but in this case the cachepool is created internally and
# then attached to the LV arg.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
#
# Note that stripes are accepted by the first and not by the
# second, but it's not possible to validate this until after
# the LV type is known.
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvcreate --cache --size SizeMB LV
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: OO_LVCREATE_CACHE, OO_LVCREATE_POOL, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
ID: lvcreate_new_plus_old_cachepool_or_lvconvert_old_plus_new_cachepool
DESC: When the LV arg is a cachepool, then create a new LV and
DESC: attach the cachepool arg to it.
DESC: (variant, use --type cache and --cachepool.)
DESC: When the LV arg is not a cachepool, then create a new cachepool
DESC: and attach it to the LV arg (alternative, use lvconvert.)
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
FLAGS: SECONDARY_SYNTAX
---
lvcreate: new cache or writecache lv with single command To create a new cache or writecache LV with a single command: lvcreate --type cache|writecache -n Name -L Size --cachedevice PVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, a new cachevol LV is created internally, using PVfast specified by the cachedevice option. - Then, the cachevol is attached to the main LV, converting the main LV to type cache|writecache. Include --cachesize Size to specify the size of cache|writecache to create from the specified --cachedevice PVs, otherwise the entire cachedevice PV is used. The --cachedevice option can be repeated to create the cache from multiple devices, or the cachedevice option can contain a tag name specifying a set of PVs to allocate the cache from. To create a new cache or writecache LV with a single command using an existing cachevol LV: lvcreate --type cache|writecache -n Name -L Size --cachevol LVfast VG [PVslow ...] - A new main linear|striped LV is created as usual, using the specified -n Name and -L Size, and using the optionally specified PVslow devices. - Then, the cachevol LVfast is attached to the main LV, converting the main LV to type cache|writecache. In cases where more advanced types (for the main LV or cachevol LV) are needed, they should be created independently and then combined with lvconvert. Example ------- user creates a new VG with one slow device and one fast device: $ vgcreate vg /dev/slow1 /dev/fast1 user creates a new 8G main LV on /dev/slow1 that uses all of /dev/fast1 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 -n main -L 8G vg /dev/slow1 Example ------- user creates a new VG with two slow devs and two fast devs: $ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2 user creates a new 8G main LV on /dev/slow1 and /dev/slow2 that uses all of /dev/fast1 and /dev/fast2 as a writecache: $ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2 -n main -L 8G vg /dev/slow1 /dev/slow2 Example ------- A user has several slow devices and several fast devices in their VG, the slow devs have tag @slow, the fast devs have tag @fast. user creates a new 8G main LV on the slow devs with a 2G writecache on the fast devs: $ lvcreate --type writecache -n main -L 8G --cachedevice @fast --cachesize 2G vg @slow
2020-04-10 21:17:37 +03:00
# These all create a new origin LV, then forwards to lvconvert
# which combines it with a cachevol (which already exists or
# which needs to be created from cachedevice), converting
# the new LV to type cache or writecache.
lvcreate --type cache --size SizeMB --cachevol LV VG
OO: OO_LVCREATE, OO_LVCREATE_CACHE, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_and_attach_cachevol_for_cache
DESC: Create a new LV, then attach the specified cachevol
DESC: which converts the new LV to type cache.
lvcreate --type cache --size SizeMB --cachedevice PV VG
OO: OO_LVCREATE, OO_LVCREATE_CACHE, --cachesize SizeMB, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_and_attach_cachedevice_for_cache
DESC: Create a new LV, then attach a cachevol created from
DESC: the specified cache device, which converts the
DESC: new LV to type cache.
lvcreate --type writecache --size SizeMB --cachevol LV VG
OO: OO_LVCREATE, --cachesettings String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_and_attach_cachevol_for_writecache
DESC: Create a new LV, then attach the specified cachevol
DESC: which converts the new LV to type writecache.
lvcreate --type writecache --size SizeMB --cachedevice PV VG
OO: OO_LVCREATE, --cachesize SizeMB, --cachesettings String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_and_attach_cachedevice_for_writecache
DESC: Create a new LV, then attach a cachevol created from
DESC: the specified cache device, which converts the
DESC: new LV to type writecache.
---
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
lvdisplay
OO: --aligned, --all, --binary, --colon, --columns,
--configreport ConfigReport, --foreign, --history, --ignorelockingfailure,
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
--logonly, --maps, --noheadings,
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
--nosuffix, --options String, --sort String, --readonly,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--reportformat ReportFmt, --segments, --select String, --separator String,
--shared, --unbuffered, --units Units
OP: VG|LV|Tag ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --partial, --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvdisplay_general
---
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
# --type is an option in lvextend/lvresize only so that the specified type
# value can be checked to match the existing type; using it doesn't
# currently enable any different behavior.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# --extents is not specified; it's an automatic alternative for --size
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvextend --size PSizeMB LV
commands: use correct relative signs with mirror option As was recently done with relative signes for sizes/extents, limit the signs used with the mirrors option, e.g. lvcreate --mirrors now does not accept or advertise an optional minus sign with the value. lvconvert --mirrors accepts +|-.
2017-03-11 00:22:13 +03:00
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors Number,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--nofsck, --nosync, --noudevsync, --reportformat ReportFmt, --resizefs,
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
--stripes Number, --stripesize SizeKB, --poolmetadatasize PSizeMB,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvextend_by_size
DESC: Extend an LV by a specified size.
lvextend LV PV ...
commands: use correct relative signs with mirror option As was recently done with relative signes for sizes/extents, limit the signs used with the mirrors option, e.g. lvcreate --mirrors now does not accept or advertise an optional minus sign with the value. lvconvert --mirrors accepts +|-.
2017-03-11 00:22:13 +03:00
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors Number,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--nofsck, --nosync, --noudevsync,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--reportformat ReportFmt, --resizefs, --stripes Number, --stripesize SizeKB,
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvextend_by_pv
DESC: Extend an LV by specified PV extents.
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvextend --poolmetadatasize PSizeMB LV_thinpool
commands: use correct relative signs with mirror option As was recently done with relative signes for sizes/extents, limit the signs used with the mirrors option, e.g. lvcreate --mirrors now does not accept or advertise an optional minus sign with the value. lvconvert --mirrors accepts +|-.
2017-03-11 00:22:13 +03:00
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors Number,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--nofsck, --nosync, --noudevsync,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--reportformat ReportFmt, --stripes Number, --stripesize SizeKB,
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvextend_pool_metadata_by_size
DESC: Extend a pool metadata SubLV by a specified size.
lvextend --usepolicies LV_thinpool_snapshot
commands: use correct relative signs with mirror option As was recently done with relative signes for sizes/extents, limit the signs used with the mirrors option, e.g. lvcreate --mirrors now does not accept or advertise an optional minus sign with the value. lvconvert --mirrors accepts +|-.
2017-03-11 00:22:13 +03:00
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors Number,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--nofsck, --nosync, --noudevsync,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--reportformat ReportFmt, --resizefs,
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvextend_by_policy
DESC: Extend an LV according to a predefined policy.
---
lvmconfig
OO: OO_CONFIG
OP: String ...
ID: lvmconfig_general
---
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
lvmdevices
ID: lvmdevices_list
DESC: Print devices in the devices file.
lvmdevices --check
ID: lvmdevices_check
DESC: Check the devices file and report incorrect values.
lvmdevices --update
ID: lvmdevices_update
DESC: Update the devices file to fix incorrect values.
lvmdevices --adddev PV
ID: lvmdevices_edit
DESC: Add a device to the devices file.
lvmdevices --deldev PV
ID: lvmdevices_edit
DESC: Remove a device from the devices file.
lvmdevices --addpvid String
ID: lvmdevices_edit
DESC: Find the device with the given PVID and add it to the devices file.
lvmdevices --delpvid String
ID: lvmdevices_edit
DESC: Remove the devices file entry for the given PVID.
---
commands: clean up and unify signed option value handling Add new values for different sign variations, resulting in: size_VAL no sign accepted ssize_VAL accepts + or - psize_VAL accepts + nsize_VAL accpets - extents_VAL no sign accepted sextents_VAL accepts + or - pextents_VAL accepts + nextents_VAL accepts - Depending on the command being run, change the option values for --size, --extents, --poolmetadatasize to use the appropriate value from above. lvcreate uses no sign (but accepts + and ignores it). lvresize accepts +|- for a relative change. lvextend accepts + for a relative change. lvreduce accepts - for a relative change.
2017-03-08 01:55:07 +03:00
lvreduce --size NSizeMB LV
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --autobackup Bool, --force, --nofsck, --noudevsync,
--reportformat ReportFmt, --resizefs
ID: lvreduce_general
---
lvremove VG|LV|Tag|Select ...
OO: --autobackup Bool, --force, --nohistory, --noudevsync,
--reportformat ReportFmt, --select String
ID: lvremove_general
---
lvrename VG LV LV_new
OO: --autobackup Bool, --noudevsync, --reportformat ReportFmt
ID: lvrename_vg_lv_lv
lvrename LV LV_new
OO: --autobackup Bool, --noudevsync, --reportformat ReportFmt
ID: lvrename_lv_lv
---
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
# --type is an option in lvextend/lvresize only so that the specified type
# value can be checked to match the existing type; using it doesn't
# currently enable any different behavior.
lvcreate/lvresize: the --size option accepts signed values There was confusion in the code about whether or not the --size option accepted a sign. Make it consistent and clear that it does. This exposes a new problem in that an option can only accept one value type, e.g. --size can only accept a signed number, it cannot accept a positive or negative number for some commands and reject negative numbers for others. In practice, lvcreate accepts only positive --size values and lvresize accepts positive or negative --size values. There is currently no way to encode this difference. Until that is fixed, the man page output is hacked to avoid printing the [+|-] prefix for sizes in lvcreate.
2017-03-02 21:53:01 +03:00
lvresize --size SSizeMB LV
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat ReportFmt, --resizefs,
lvresize: poolmetadatasize cannot use minus
2017-03-09 18:49:33 +03:00
--stripes Number, --stripesize SizeKB, --poolmetadatasize PSizeMB,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.
lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--reportformat ReportFmt, --resizefs, --stripes Number, --stripesize SizeKB,
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.
lvresize: poolmetadatasize cannot use minus
2017-03-09 18:49:33 +03:00
lvresize --poolmetadatasize PSizeMB LV_thinpool
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
lvresize/lvextend: accept type option The --type option has previously been accepted for lvresize/lvextend. Using it did not affect the operation of the command. The value was simply verified as matching the current seg type of the LV.
2017-02-20 20:23:46 +03:00
--reportformat ReportFmt, --stripes Number, --stripesize SizeKB,
--type SegType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.
---
lvs
OO: --history, --segments, OO_REPORT
OP: VG|LV|Tag ...
remove unused trustcache option
2019-06-11 19:42:49 +03:00
IO: --partial, --ignoreskippedcluster, --trustcache
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvs_general
---
lvscan
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
OO: --all, --blockdevice, --ignorelockingfailure,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--readonly, --reportformat ReportFmt
Remove lvmetad Native disk scanning is now both reduced and async/parallel, which makes it comparable in performance (and often faster) when compared to lvm using lvmetad. Autoactivation now uses local temp files to record online PVs, and no longer requires lvmetad. There should be no apparent command-level change in behavior.
2018-07-10 21:39:29 +03:00
IO: --partial, --cache_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: lvscan_general
---
# None of these can function as a required option for pvchange.
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
OO_PVCHANGE: --autobackup Bool, --force, --reportformat ReportFmt, --uuid
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
# Any of these can function as a required option for pvchange.
OO_PVCHANGE_META: --allocatable Bool, --addtag Tag, --deltag Tag,
--uuid, --metadataignore Bool
fix command definition for pvchange -a The -a was being included in the set of "one or more" options instead of an actual required option. Even though the cmd def was not implementing the restrictions correctly, the command internally was. Adjust the cmd def code which did not support a command with some real required options and a set of "one or more" options.
2019-06-10 19:35:26 +03:00
pvchange --all OO_PVCHANGE_META
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OO: OO_PVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: pvchange_properties_all
DESC: Change properties of all PVs.
pvchange OO_PVCHANGE_META PV|Select ...
OO: --select String, OO_PVCHANGE
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: pvchange_properties_some
DESC: Change properties of specified PVs.
---
pvresize PV ...
OO: --setphysicalvolumesize SizeMB, --reportformat ReportFmt
ID: pvresize_general
---
pvck PV ...
OO: --labelsector Number
ID: pvck_general
pvck: new dump option to extract metadata The new command 'pvck --dump metadata PV' will extract the current version of VG metadata from a PV for testing and debugging. --dump metadata_area extracts the entire text metadata area.
2019-05-22 22:25:08 +03:00
DESC: Check for metadata on a device
pvck: show specific dump option values
2019-12-10 20:06:45 +03:00
pvck --dump DumpType PV
pvck: repair headers and metadata To write a new/repaired pv_header and label_header: pvck --repairtype pv_header --file <file> <device> This uses the metadata input file to find the PV UUID, device size, and data offset. To write new/repaired metadata text and mda_header: pvck --repairtype metadata --file <file> <device> This requires a good pv_header which points to one or two metadata areas. Any metadata areas referenced by the pv_header are updated with the specified metadata and a new mda_header. "--settings mda_num=1|2" can be used to select one mda to repair. To combine all header and metadata repairs: pvck --repair --file <file> <device> It's best to use a raw metadata file as input, that was extracted from another PV in the same VG (or from another metadata area on the same PV.) pvck will also accept a metadata backup file, but that will produce metadata that is not identical to other metadata copies on other PVs and other areas. So, when using a backup file, consider using it to update metadata on all PVs/areas. To get a raw metadata file to use for the repair, see pvck --dump metadata|metadata_search. List all instances of metadata from the metadata area: pvck --dump metadata_search <device> Save one instance of metadata at the given offset to the specified file (this file can be used for repair): pvck --dump metadata_search --file <file> --settings "metadata_offset=<off>" <device>
2019-10-30 00:08:43 +03:00
OO: --settings String, --file String,
--pvmetadatacopies MetadataCopiesPV, --labelsector Number
pvck: dump headers and metadata Add 'pvck --dump headers' to print all the lvm ondisk structs. Also checks the values and prints any problems. The previous dump metadata is also converted to use these same routines, which do not depend on lvm fully scanning/reading/processing the headers and metadata on disk. This makes it useful to get data in cases where there is corruption that would otherwise prevent the normal functions from working.
2019-05-31 22:10:44 +03:00
ID: pvck_dump
pvck: repair headers and metadata To write a new/repaired pv_header and label_header: pvck --repairtype pv_header --file <file> <device> This uses the metadata input file to find the PV UUID, device size, and data offset. To write new/repaired metadata text and mda_header: pvck --repairtype metadata --file <file> <device> This requires a good pv_header which points to one or two metadata areas. Any metadata areas referenced by the pv_header are updated with the specified metadata and a new mda_header. "--settings mda_num=1|2" can be used to select one mda to repair. To combine all header and metadata repairs: pvck --repair --file <file> <device> It's best to use a raw metadata file as input, that was extracted from another PV in the same VG (or from another metadata area on the same PV.) pvck will also accept a metadata backup file, but that will produce metadata that is not identical to other metadata copies on other PVs and other areas. So, when using a backup file, consider using it to update metadata on all PVs/areas. To get a raw metadata file to use for the repair, see pvck --dump metadata|metadata_search. List all instances of metadata from the metadata area: pvck --dump metadata_search <device> Save one instance of metadata at the given offset to the specified file (this file can be used for repair): pvck --dump metadata_search --file <file> --settings "metadata_offset=<off>" <device>
2019-10-30 00:08:43 +03:00
DESC: Check and print LVM headers and metadata on a device
pvck --repairtype RepairType PV
OO: --settings String, --file String, --labelsector Number
ID: pvck_repair_type
DESC: Repair LVM headers or metadata on a device
pvck --repair --file String PV
OO: --settings String, --labelsector Number
ID: pvck_repair
DESC: Repair LVM headers and metadata on a device
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
# Use --uuidstr here which will be converted to uuidstr_ARG
# which is actually --uuid string on the command line.
pvcreate PV ...
OO: --dataalignment SizeKB, --dataalignmentoffset SizeKB, --bootloaderareasize SizeMB,
--force, --labelsector Number, --metadatatype MetadataType,
--pvmetadatacopies MetadataCopiesPV, --metadatasize SizeMB,
--metadataignore Bool, --norestorefile, --setphysicalvolumesize SizeMB,
--reportformat ReportFmt, --restorefile String, --uuidstr String, --zero Bool
ID: pvcreate_general
pvcreate: Disallow --bootloaderareasize with --restorefile. The backup file already holds the bootloader area details to use so don't overcomplicate things.
2017-08-11 22:28:53 +03:00
RULE: --norestorefile not --restorefile
RULE: --bootloaderareasize not --restorefile
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
pvdisplay
OO: --aligned, --all, --binary, --colon, --columns, --configreport ConfigReport,
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
--foreign, --ignorelockingfailure,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--logonly, --maps, --noheadings, --nosuffix, --options String,
--readonly, --reportformat ReportFmt, --select String, --separator String, --shared,
--short, --sort String, --unbuffered, --units Units
OP: PV|Tag ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: pvdisplay_general
---
pvmove PV
OO: --abort, --alloc Alloc, --atomic, --autobackup Bool, --background,
--interval Number, --name LV, --noudevsync, --reportformat ReportFmt
OP: PV ...
ID: pvmove_one
DESC: Move PV extents.
pvmove
OO: --abort, --background, --interval Number
ID: pvmove_any
DESC: Continue or abort existing pvmove operations.
---
pvremove PV ...
OO: --force, --reportformat ReportFmt
ID: pvremove_general
---
pvs
OO: --segments, OO_REPORT
OP: PV|Tag ...
remove unused trustcache option
2019-06-11 19:42:49 +03:00
IO: --partial, --ignoreskippedcluster, --trustcache
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: pvs_general
---
pvscan
OO: --ignorelockingfailure, --reportformat ReportFmt, --exported, --novolumegroup,
--short, --uuid
Remove lvmetad Native disk scanning is now both reduced and async/parallel, which makes it comparable in performance (and often faster) when compared to lvm using lvmetad. Autoactivation now uses local temp files to record online PVs, and no longer requires lvmetad. There should be no apparent command-level change in behavior.
2018-07-10 21:39:29 +03:00
ID: pvscan_display
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
DESC: Display PV information.
pvscan --cache_long
pvscan: background option is not used Move this into the list of ignored options so it doesn't appear in the man page.
2018-11-14 02:27:53 +03:00
OO: --ignorelockingfailure, --reportformat ReportFmt,
pvscan: allow use of noudevsync option When pvscan is used to activate a VG via an asynchronous service (i.e. lvm2-pvscan), there is no requirement that the command wait for udev to create device nodes before returning. It's possible that waiting for udev is slow enough to cause the service running the command to time out. So, allow the --noudevsync option to be given to pvscan to skip waiting for udev. (This commit is not changing the lvm2-pvscan service itself to use --noudevsync.) Still unknown is whether there are any complex LV activation cases in which lvm itself requires access to a device node, in which case the udev wait could be needed by lvm itself. (When running an activation command directly from the command line, it's generally expected that the activated LVs are ready to use when the command is finished, so lvm waits for udev to finish creating the dev nodes.)
2019-09-10 17:47:33 +03:00
--activate ay, --major Number, --minor Number, --noudevsync
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: PV|String ...
pvscan: background option is not used Move this into the list of ignored options so it doesn't appear in the man page.
2018-11-14 02:27:53 +03:00
IO: --background
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: pvscan_cache
Remove lvmetad Native disk scanning is now both reduced and async/parallel, which makes it comparable in performance (and often faster) when compared to lvm using lvmetad. Autoactivation now uses local temp files to record online PVs, and no longer requires lvmetad. There should be no apparent command-level change in behavior.
2018-07-10 21:39:29 +03:00
DESC: Autoactivate a VG when all PVs are online.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
vgcfgbackup
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
OO: --file String, --foreign, --ignorelockingfailure, --readonly,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--reportformat ReportFmt
OP: VG ...
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
IO: --partial
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgcfgbackup_general
---
OO_VGCFGRESTORE: --force_long, --metadatatype MetadataType
vgcfgrestore VG
OO: OO_VGCFGRESTORE
ID: vgcfgrestore_by_vg
DESC: Restore VG metadata from last backup.
vgcfgrestore --file String VG
OO: OO_VGCFGRESTORE
ID: vgcfgrestore_by_file
DESC: Restore VG metadata from specified file.
vgcfgrestore --list VG
OO: OO_VGCFGRESTORE
ID: vgcfgrestore_list_by_vg
DESC: List all VG metadata backups.
# FIXME: the optional VG pos arg is not used or checked and can be
# anything, but a test in the test suite uses it. Fix the test or
# verify that the positional VG is correct?
vgcfgrestore --list --file String
OO: OO_VGCFGRESTORE
OP: VG
ID: vgcfgrestore_list_by_file
DESC: List one VG metadata backup file.
---
# None of these can function as a required option for vgchange.
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
OO_VGCHANGE: --autobackup Bool, --ignoremonitoring,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--noudevsync, --reportformat ReportFmt, --select String, --force
# Any of these can function as a required option for vgchange.
# profile is also part of OO_ALL, but is repeated in OO_VGCHANGE_META
# because it can function as a required opt.
OO_VGCHANGE_META: --addtag Tag, --deltag Tag,
vgchange: fix uint32 parsing of logicalvolume arg
2017-02-07 01:10:09 +03:00
--logicalvolume Uint32, --maxphysicalvolumes Uint32, --alloc Alloc, --uuid,
Remove clvmd and associated code More code reduction and simplification can follow.
2018-06-05 18:47:01 +03:00
--pvmetadatacopies MetadataCopiesPV, --vgmetadatacopies MetadataCopiesVG,
vgchange: split out code for systemid Use the command definitions to separate the implementation of vgchange systemid from the rest of vgchange.
2017-07-13 21:43:39 +03:00
--physicalextentsize SizeMB, --resizeable Bool,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--profile String, --detachprofile, --metadataprofile String
vgchange OO_VGCHANGE_META
vgchange/lvchange: fix poll and monitor use Fill in some gaps where old versions of lvm allowed --poll and --monitor in combination with other operations, but those combinations had been lost since the cmd def work. (The new cmd def code also added some combinations that had been missed by the old code.) Changes: lvchange --activate: add poll and monitor options, and add calls to them in implementation. lvchange --refresh: add monitor option (poll already there), and call to monitor in implementation. lvchange <metadata ops>: add poll and monitor options, and add calls to them in implementation. vgchange <metadata ops>: add poll option (call to poll already in implementation). vgchange --refresh: remove monitor option (not used by code) lvchange --persistent y: add poll and monitor options, and add calls to them, and to activate in the implementation. (Making it match the main lvchange metadata command.) Summary of current usage: lvchange --activate: monitor, poll vgchange --activate: monitor, poll lvchange --refresh: monitor, poll vgchange --refresh: poll lvchange --monitor: ok lvchange --poll: ok lvchange --monitor --poll: ok vgchange --monitor: ok vgchange --poll: ok vgchange --monitor --poll: ok lvchange <metadata ops>: monitor, poll vgchange <metadata ops>: poll
2017-04-04 20:52:29 +03:00
OO: --poll Bool, OO_VGCHANGE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: VG|Tag|Select ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgchange_properties
man vgchange/lvchange: note special option usage
2017-02-21 00:26:24 +03:00
DESC: Change a general VG attribute.
DESC: For options listed in parentheses, any one is
DESC: required, after which the others are optional.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
vgchange --monitor Bool
OO: --sysinit, --ignorelockingfailure, --poll Bool, OO_VGCHANGE
OP: VG|Tag|Select ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgchange_monitor
DESC: Start or stop monitoring LVs from dmeventd.
vgchange --poll Bool
OO: --ignorelockingfailure, OO_VGCHANGE
OP: VG|Tag|Select ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgchange_poll
DESC: Start or stop processing LV conversions.
vgchange --activate Active
OO: --activationmode ActivationMode, --ignoreactivationskip, --partial, --sysinit,
fix readonly activation override options This fixes a problem in commit e6bb780d242, in which the back compat handling for the old locking_type=4 was incorrectly translated to mean the same thing as --readonly, which prevented activation because activation uses an exclusive vg lock. Previously, locking_type=4 allowed activation. If we see locking_type 4 in an old config, translate it to the new combination of --readonly and --sysinit, which we now define to mean the --readonly behavior with an exception to allow activation.
2018-09-12 23:59:47 +03:00
--readonly, --ignorelockingfailure, --monitor Bool, --poll Bool, OO_VGCHANGE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: VG|Tag|Select ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgchange_activate
DESC: Activate or deactivate LVs.
vgchange --refresh
vgchange/lvchange: fix poll and monitor use Fill in some gaps where old versions of lvm allowed --poll and --monitor in combination with other operations, but those combinations had been lost since the cmd def work. (The new cmd def code also added some combinations that had been missed by the old code.) Changes: lvchange --activate: add poll and monitor options, and add calls to them in implementation. lvchange --refresh: add monitor option (poll already there), and call to monitor in implementation. lvchange <metadata ops>: add poll and monitor options, and add calls to them in implementation. vgchange <metadata ops>: add poll option (call to poll already in implementation). vgchange --refresh: remove monitor option (not used by code) lvchange --persistent y: add poll and monitor options, and add calls to them, and to activate in the implementation. (Making it match the main lvchange metadata command.) Summary of current usage: lvchange --activate: monitor, poll vgchange --activate: monitor, poll lvchange --refresh: monitor, poll vgchange --refresh: poll lvchange --monitor: ok lvchange --poll: ok lvchange --monitor --poll: ok vgchange --monitor: ok vgchange --poll: ok vgchange --monitor --poll: ok lvchange <metadata ops>: monitor, poll vgchange <metadata ops>: poll
2017-04-04 20:52:29 +03:00
OO: --sysinit, --ignorelockingfailure, --poll Bool, OO_VGCHANGE
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: VG|Tag|Select ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgchange_refresh
DESC: Reactivate LVs using the latest metadata.
vgchange: split out code for systemid Use the command definitions to separate the implementation of vgchange systemid from the rest of vgchange.
2017-07-13 21:43:39 +03:00
vgchange --systemid String VG
ID: vgchange_systemid
DESC: Change the system ID of a VG.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
vgchange --lockstart
lvmlockd: add lockopt values for skipping selected locks and add lockopt to common options.
2018-01-09 20:18:57 +03:00
OO: --select String
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: VG|Tag|Select ...
ID: vgchange_lockstart
DESC: Start the lockspace of a shared VG in lvmlockd.
vgchange --lockstop
lvmlockd: add lockopt values for skipping selected locks and add lockopt to common options.
2018-01-09 20:18:57 +03:00
OO: --select String
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
OP: VG|Tag|Select ...
ID: vgchange_lockstop
DESC: Stop the lockspace of a shared VG in lvmlockd.
vgchange: separate change locktype and allow recovery Add an independent command definition for "vgchange --locktype", and split the implementation out of the set of common metadata changes. It is unlike normal metadata changes, and can only be run by itself. (Changing the lock type is similar in principle to changing the VG name or the VG system ID; it effects the ability of any host to see or access the VG.) At some point this command lost the ability to forcibly change the lock type of a shared VG to "none" (making it a local VG). This can be necessary to repair shared VGs (e.g. recovery steps that occur in vg_read are disabled for shared VGs because they are not locked properly, or recovering sanlock locks when the PV holding them is lost.) "vgchange --locktype none --lockopt force VG" is used as the method of forcing the shared VG to become local so that it can be repaired.
2017-07-13 00:03:41 +03:00
vgchange --locktype LockType VG
ID: vgchange_locktype
DESC: Change the lock type for a shared VG.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
vgck
OO: --reportformat ReportFmt
OP: VG|Tag ...
ID: vgck_general
vgck --updatemetadata is a new command uses vg_write to correct more common or less severe issues, and also adds the ability to repair some metadata corruption that couldn't be handled previously.
2019-02-06 22:39:41 +03:00
DESC: Read and display information about a VG.
vgck --updatemetadata VG
ID: vgck_update_metadata
DESC: Rewrite VG metadata to correct problems.
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
---
vgcreate VG_new PV ...
vgchange: fix uint32 parsing of logicalvolume arg
2017-02-07 01:10:09 +03:00
OO: --addtag Tag, --alloc Alloc, --autobackup Bool, --clustered Bool, --maxlogicalvolumes Uint32,
args: use uint32 arg for maxphysicalvolumes
2017-01-04 00:52:27 +03:00
--maxphysicalvolumes Uint32, --metadataprofile String, --metadatatype MetadataType,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--physicalextentsize SizeMB, --force, --zero Bool, --labelsector Number,
--metadatasize SizeMB, --pvmetadatacopies MetadataCopiesPV, --vgmetadatacopies MetadataCopiesVG,
--reportformat ReportFmt, --dataalignment SizeKB, --dataalignmentoffset SizeKB,
lvmlockd: add lockopt values for skipping selected locks and add lockopt to common options.
2018-01-09 20:18:57 +03:00
--shared, --systemid String, --locktype LockType
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgcreate_general
---
vgdisplay
OO: --activevolumegroups, --aligned, --binary, --colon, --columns,
--configreport ConfigReport, --foreign, --ignorelockingfailure,
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
--logonly, --noheadings, --nosuffix,
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
--options String, --readonly, --reportformat ReportFmt, --select String,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--shared, --short, --separator String, --sort String, --unbuffered, --units Units
OP: VG|Tag ...
Drop --ignoreskippedcluster option It's no longer needed. Clustered VGs are now handled in the same way as foreign VGs, and as shared VGs that can't be accessed: - A command processing all VGs sees a clustered VG, prints a message ("Skipping clustered VG foo."), skips it, and does not fail. - A command where the clustered VG is explicitly named on the command line, prints a message and fails. "Cannot access clustered VG foo, see lvmlockd(8)." The option is listed in the set of ignored options for the commands that previously accepted it. (Removing it entirely would cause commands/scripts to fail if they set it.)
2018-06-15 23:43:59 +03:00
IO: --partial, --ignoreskippedcluster
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgdisplay_general
---
OO_VGEXPORT: --reportformat ReportFmt
vgexport VG|Tag|Select ...
OO: --select String, OO_VGEXPORT
ID: vgexport_some
DESC: Export specified VGs.
vgexport --all
OO: OO_VGEXPORT
ID: vgexport_all
DESC: Export all VGs.
---
vgextend VG PV ...
OO: --autobackup Bool,
--force, --zero Bool, --labelsector Number, --metadatatype MetadataType,
--metadatasize SizeMB, --pvmetadatacopies MetadataCopiesPV,
--metadataignore Bool, --dataalignment SizeKB, --dataalignmentoffset SizeKB,
--reportformat ReportFmt, --restoremissing
ID: vgextend_general
---
OO_VGIMPORT: --force, --reportformat ReportFmt
vgimport VG|Tag|Select ...
OO: --select String, OO_VGIMPORT
ID: vgimport_some
DESC: Import specified VGs.
vgimport --all
OO: OO_VGIMPORT
ID: vgimport_all
DESC: Import all VGs.
---
vgimportclone PV ...
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
OO: --basevgname VG, --import, --importdevices
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgimportclone_general
---
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
vgimportdevices VG|Tag|Select ...
OO: --select String, --foreign, --reportformat ReportFmt
ID: vgimportdevices_some
DESC: Add devices from specific VGs to the devices file.
vgimportdevices --all
OO: --foreign, --reportformat ReportFmt
ID: vgimportdevices_all
DESC: Add devices from all accessible VGs to the devices file.
---
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
vgmerge VG VG
OO: --autobackup Bool, --list
ID: vgmerge_general
---
vgmknodes
OO: --ignorelockingfailure, --refresh, --reportformat ReportFmt
OP: VG|LV|Tag ...
ID: vgmknodes_general
---
OO_VGREDUCE: --autobackup Bool, --force, --reportformat ReportFmt
vgreduce VG PV ...
OO: OO_VGREDUCE
ID: vgreduce_by_pv
DESC: Remove a PV from a VG.
vgreduce --all VG
OO: OO_VGREDUCE
ID: vgreduce_all
DESC: Remove all unused PVs from a VG.
vgreduce --removemissing VG
OO: --mirrorsonly, OO_VGREDUCE
ID: vgreduce_missing
DESC: Remove all missing PVs from a VG.
---
vgremove VG|Tag|Select ...
OO: --force, --noudevsync, --reportformat ReportFmt, --select String
ID: vgremove_general
---
vgrename VG VG_new
OO: --autobackup Bool, --force, --reportformat ReportFmt
ID: vgrename_by_name
DESC: Rename a VG.
vgrename String VG_new
OO: --autobackup Bool, --force, --reportformat ReportFmt
ID: vgrename_by_uuid
DESC: Rename a VG by specifying the VG UUID.
---
vgs
OO: OO_REPORT
OP: VG|Tag ...
remove unused trustcache option
2019-06-11 19:42:49 +03:00
IO: --partial, --ignoreskippedcluster, --trustcache
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgs_general
---
vgscan
Remove lvmetad Native disk scanning is now both reduced and async/parallel, which makes it comparable in performance (and often faster) when compared to lvm using lvmetad. Autoactivation now uses local temp files to record online PVs, and no longer requires lvmetad. There should be no apparent command-level change in behavior.
2018-07-10 21:39:29 +03:00
OO: --ignorelockingfailure, --mknodes, --notifydbus,
commands: ignore partial option in most cases These days --partial is only used with activation in lvchange/vgchange. It probably had another meaning at some point in history which is no longer used, so ignore it in those cases. When included in the OO list, the option is advertised in help/man output, implying it is meaningful to the command, when in fact the command never uses it. The IO list means the option won't cause an error if it's used, but is not displayed as an valid option for the command. If the option is not included in either OO or IO lists, using the option would cause a command error, which would cause problems for anyone is using the option for historical reasons.
2017-04-03 22:39:35 +03:00
--reportformat ReportFmt
Remove lvmetad Native disk scanning is now both reduced and async/parallel, which makes it comparable in performance (and often faster) when compared to lvm using lvmetad. Autoactivation now uses local temp files to record online PVs, and no longer requires lvmetad. There should be no apparent command-level change in behavior.
2018-07-10 21:39:29 +03:00
IO: --partial, --cache_long
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: vgscan_general
---
OO_VGSPLIT: --autobackup Bool
# used only when the destination VG is new
Remove clvmd and associated code More code reduction and simplification can follow.
2018-06-05 18:47:01 +03:00
OO_VGSPLIT_NEW: --alloc Alloc,
vgchange: fix uint32 parsing of logicalvolume arg
2017-02-07 01:10:09 +03:00
--maxlogicalvolumes Uint32, --maxphysicalvolumes Uint32,
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
--metadatatype MetadataType, --vgmetadatacopies MetadataCopiesVG
vgsplit VG VG PV ...
OO: OO_VGSPLIT, OO_VGSPLIT_NEW
ID: vgsplit_by_pv
DESC: Split a VG by specified PVs.
vgsplit --name LV VG VG
OO: OO_VGSPLIT, OO_VGSPLIT_NEW
ID: vgsplit_by_lv
DESC: Split a VG by PVs in a specified LV.
---
# built-in and deprecated commands
# use lvmconfig
config
OO: OO_CONFIG
OP: String ...
ID: lvmconfig_general
# use lvmconfig
dumpconfig
OO: OO_CONFIG
OP: String ...
ID: lvmconfig_general
devtypes
OO: --aligned, --binary, --nameprefixes, --noheadings,
--nosuffix, --options String, --reportformat ReportFmt, --rows,
--select String, --separator String, --sort String, --unbuffered, --unquoted
ID: devtypes_general
fullreport
OO: OO_REPORT
OP: VG ...
remove unused trustcache option
2019-06-11 19:42:49 +03:00
IO: --partial, --ignoreskippedcluster, --trustcache
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: fullreport_general
lastlog
OO: --reportformat ReportFmt, --select String
ID: lastlog_general
lvpoll --polloperation PollOp LV ...
OO: --abort, --autobackup Bool, --handlemissingpvs, --interval Number
ID: lvpoll_general
formats
ID: formats_general
help
help: accept positional args lvm help <commandname> ...
2017-01-13 20:31:49 +03:00
OP: String ...
commands: new method for defining commands . Define a prototype for every lvm command. . Match every user command with one definition. . Generate help text and man pages from them. The new file command-lines.in defines a prototype for every unique lvm command. A unique lvm command is a unique combination of: command name + required option args + required positional args. Each of these prototypes also includes the optional option args and optional positional args that the command will accept, a description, and a unique string ID for the definition. Any valid command will match one of the prototypes. Here's an example of the lvresize command definitions from command-lines.in, there are three unique lvresize commands: lvresize --size SizeMB LV OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB OP: PV ... ID: lvresize_by_size DESC: Resize an LV by a specified size. lvresize LV PV ... OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --resizefs, --stripes Number, --stripesize SizeKB ID: lvresize_by_pv DESC: Resize an LV by specified PV extents. FLAGS: SECONDARY_SYNTAX lvresize --poolmetadatasize SizeMB LV_thinpool OO: --alloc Alloc, --autobackup Bool, --force, --nofsck, --nosync, --noudevsync, --reportformat String, --stripes Number, --stripesize SizeKB OP: PV ... ID: lvresize_pool_metadata_by_size DESC: Resize a pool metadata SubLV by a specified size. The three commands have separate definitions because they have different required parameters. Required parameters are specified on the first line of the definition. Optional options are listed after OO, and optional positional args are listed after OP. This data is used to generate corresponding command definition structures for lvm in command-lines.h. usage/help output is also auto generated, so it is always in sync with the definitions. Every user-entered command is compared against the set of command structures, and matched with one. An error is reported if an entered command does not have the required parameters for any definition. The closest match is printed as a suggestion, and running lvresize --help will display the usage for each possible lvresize command. The prototype syntax used for help/man output includes required --option and positional args on the first line, and optional --option and positional args enclosed in [ ] on subsequent lines. command_name <required_opt_args> <required_pos_args> [ <optional_opt_args> ] [ <optional_pos_args> ] Command definitions that are not to be advertised/suggested have the flag SECONDARY_SYNTAX. These commands will not be printed in the normal help output. Man page prototypes are also generated from the same original command definitions, and are always in sync with the code and help text. Very early in command execution, a matching command definition is found. lvm then knows the operation being done, and that the provided args conform to the definition. This will allow lots of ad hoc checking/validation to be removed throughout the code. Each command definition can also be routed to a specific function to implement it. The function is associated with an enum value for the command definition (generated from the ID string.) These per-command-definition implementation functions have not yet been created, so all commands currently fall back to the existing per-command-name implementation functions. Using per-command-definition functions will allow lots of code to be removed which tries to figure out what the command is meant to do. This is currently based on ad hoc and complicated option analysis. When using the new functions, what the command is doing is already known from the associated command definition.
2016-08-12 23:52:18 +03:00
ID: help_general
version
ID: version_general
# deprecated
pvdata
ID: pvdata_general
segtypes
ID: segtypes_general
systemid
ID: systemid_general
tags
ID: tags_general
# deprecated
lvmchange
ID: lvmchange_general
# deprecated
lvmdiskscan
OO: --lvmpartition, --readonly
ID: lvmdiskscan_general
# deprecated
lvmsadc
ID: lvmsadc_general
# deprecated
lvmsar
OO: --full, --stdin
ID: lvmsar_general
Remove vgconvert it has no use without lvm1
2018-06-13 22:12:46 +03:00
# deprecated
vgconvert VG ...
OO: --force, --labelsector Number, --bootloaderareasize SizeMB,
--metadatatype MetadataType, --pvmetadatacopies MetadataCopiesPV,
--metadatasize SizeMB, --reportformat ReportFmt
ID: vgconvert_general
Copy Permalink