lvm2/man/lvmcache.7.in

.TH "LVMCACHE" "7" "LVM TOOLS #VERSION#" "Red Hat, Inc" "\""
.SH NAME
lvmcache \(em LVM caching

.SH DESCRIPTION

The \fBcache\fP logical volume type uses a small and fast LV to improve
the performance of a large and slow LV.  It does this by storing the
frequently used blocks on the faster LV.
LVM refers to the small fast LV as a \fBcache pool LV\fP.  The large
slow LV is called the \fBorigin LV\fP.  Due to requirements from dm-cache
(the kernel driver), LVM further splits the cache pool LV into two
devices - the \fBcache data LV\fP and \fBcache metadata LV\fP.  The cache
data LV is where copies of data blocks are kept from the
origin LV to increase speed.  The cache metadata LV holds the
accounting information that specifies where data blocks are stored (e.g.
on the origin LV or on the cache data LV).  Users should be familiar with
these LVs if they wish to create the best and most robust cached
logical volumes.  All of these associated LVs must be in the same VG.

.SH Cache Terms
.nf
origin LV           OriginLV      large slow LV
cache data LV       CacheDataLV   small fast LV for cache pool data
cache metadata LV   CacheMetaLV   small fast LV for cache pool metadata
cache pool LV       CachePoolLV   CacheDataLV + CacheMetaLV
cache LV            CacheLV       OriginLV + CachePoolLV
.fi

.SH Cache Usage

The primary method for using a cache type logical volume:


.SS 0. create OriginLV

Create an LV or identify an existing LV to be the origin LV.

.B lvcreate \-n OriginLV \-L LargeSize VG SlowPVs

.I Example
.br
# lvcreate \-n lvol0 \-L 100G vg


.SS 1. create CacheDataLV

Create the cache data LV.  This LV will hold data blocks from the
OriginLV.  The size of this LV is the size of the cache and will be
reported as the size of the cache pool LV.  

.B lvcreate \-n CacheDataLV \-L CacheSize VG FastPVs

.I Example
.br
# lvcreate \-n cache0 \-L 10G vg /dev/fast


.SS 2. create CacheMetaLV

Create the cache metadata LV.  This LV will hold cache pool metadata.  The
size of this LV should be 1000 times smaller than the cache data LV, with
a minimum size of 8MiB.

.B lvcreate \-n CacheMetaLV \-L MetaSize VG FastPVs

.I Example
.br
# lvcreate \-n cache0meta \-L 12M vg /dev/fast

.nf
# lvs -a vg
  LV         VG   Attr       LSize   Pool Origin
  cache0     vg   -wi-a-----  10.00g                                                    
  cache0meta vg   -wi-a-----  12.00m                                                    
  lvol0      vg   -wi-a----- 100.00g
.fi


.SS 3. create CachePoolLV

Combine the data and metadata LVs into a cache pool LV.
The behavior of the cache pool LV can be set in this step.
.br
CachePoolLV takes the name of CacheDataLV.
.br
CacheDataLV is renamed CachePoolLV_cdata and becomes hidden.
.br
CacheMetaLV is renamed CachePoolLV_cmeta and becomes hidden.

.B lvconvert \-\-type cache-pool \-\-poolmetadata VG/CacheMetaLV
.RS
.B VG/CacheDataLV
.RE

.I Example
.br
# lvconvert \-\-type cache\-pool \-\-poolmetadata vg/cache0meta vg/cache0

.nf
# lvs -a vg
  LV              VG   Attr       LSize   Pool Origin
  cache0          vg   Cwi---C---  10.00g
  [cache0_cdata]  vg   Cwi-------  10.00g
  [cache0_cmeta]  vg   ewi-------  12.00m
  lvol0           vg   -wi-a----- 100.00g
.fi


.SS 4. create CacheLV

Create a cache LV by linking the cache pool LV to the origin LV.
The user accessible cache LV takes the name of the origin LV,
while the origin LV becomes a hidden LV with the name
OriginLV_corig.  This can be done while the origin LV is in use.
.br
CacheLV takes the name of OriginLV.
.br
OriginLV is renamed OriginLV_corig and becomes hidden.

.B lvconvert \-\-type cache \-\-cachepool VG/CachePoolLV VG/OriginLV

.I Example
.br
# lvconvert \-\-type cache \-\-cachepool vg/cache0 vg/lvol0

.nf
# lvs -a vg
  LV              VG   Attr       LSize   Pool   Origin
  cache0          vg   Cwi---C---  10.00g                                                             
  [cache0_cdata]  vg   Cwi-ao----  10.00g                                                             
  [cache0_cmeta]  vg   ewi-ao----  12.00m                                                             
  lvol0           vg   Cwi-a-C--- 100.00g cache0 [lvol0_corig]                                        
  [lvol0_corig]   vg   -wi-ao---- 100.00g                                                             
.fi


.SH Cache Removal

.SS Split a cache pool LV off of a cache LV

\&

A cache pool LV can be disconnected from a cache LV, leaving an
unused cache pool LV, and an uncached origin LV.  This command
writes back data from the cache pool to the origin LV when necessary.

.B lvconvert --splitcache VG/CacheLV

.SS Removing a cache pool LV without removing its linked origin LV

\&

This writes back data from the cache pool to the origin LV when necessary,
then removes the cache pool LV, leaving the uncached origin LV.

.B lvremove VG/CachePoolLV

An alternative command that also disconnects the cache pool from the cache
LV, and deletes the cache pool:

.B lvconvert --uncache VG/CacheLV

.I Example
.nf
# lvs vg
  LV     VG   Attr       LSize   Pool   Origin
  cache0 vg   Cwi---C---  10.00g
  lvol0  vg   Cwi-a-C--- 100.00g cache0 [lvol0_corig]

# lvremove vg/cache0

# lvs vg
  LV    VG   Attr       LSize   Pool Origin
  lvol0 vg   -wi-a----- 100.00g
.fi

.SS Removing a cache LV: both origin LV and the cache pool LV

\&

Removing a cache LV removes both the origin LV and the linked cache pool
LV.

.B lvremove VG/CacheLV


.SH Cache Topics

.SS Tolerate device failures in a cache pool LV

\&

Users who are concerned about the possibility of failures in their fast
devices that could lead to data loss might consider making their cache
pool sub-LVs redundant.

.I Example
.nf
0. Create an origin LV we wish to cache
# lvcreate \-L 10G \-n lv1 vg /dev/slow_devs

1. Create a 2-way RAID1 cache data LV
# lvcreate \-\-type raid1 \-m 1 \-L 1G -n cache1 vg \\
	/dev/fast1 /dev/fast2

2. Create a 2-way RAID1 cache metadata LV
# lvcreate \-\-type raid1 \-m 1 \-L 8M -n cache1meta vg \\
	/dev/fast1 /dev/fast2

3. Create a cache pool LV combining cache data LV and cache metadata LV
# lvconvert \-\-type cache\-pool \-\-poolmetadata vg/cache1meta vg/cache1

4. Create a cached LV by combining the cache pool LV and origin LV
# lvconvert \-\-type cache \-\-cachepool vg/cache1 vg/lv1
.fi

.SS Cache mode

\&

The default cache mode is "writethrough".  Writethrough ensures that any
data written will be stored both in the cache pool LV and on the origin
LV.  The loss of a device associated with the cache pool LV in this case
would not mean the loss of any data.

A second cache mode is "writeback".  Writeback delays writing data blocks
from the cache pool back to the origin LV.  This mode will increase
performance, but the loss of a device associated with the cache pool LV
can result in lost data.

With the \-\-cachemode option, the cache mode can be set when creating a
cache LV, or changed on an existing cache LV.  The current cache mode of a
cache LV can be displayed with the cache_mode reporting option:

.B lvs \-o+cache_mode VG/CacheLV

.BR lvm.conf (5)
.B allocation/cache_mode
.br
defines the default cache mode.

.I Example
.nf
0. Create an origin LV we wish to cache (yours may already exist)
# lvcreate \-L 10G \-n lv1 vg /dev/slow

1. Create a cache data LV
# lvcreate \-L 1G \-n cache1 vg /dev/fast

2. Create a cache metadata LV
# lvcreate \-L 8M \-n cache1meta vg /dev/fast

3. Create a cache pool LV
# lvconvert \-\-type cache\-pool \-\-poolmetadata vg/cache1meta vg/cache1

4. Create a cache LV by combining the cache pool LV and origin LV,
   and use the writethrough cache mode.
# lvconvert \-\-type cache \-\-cachepool vg/cache1 \\
	\-\-cachemode writethrough vg/lv1
.fi


.SS Cache policy

\&

The cache subsystem has additional per-LV parameters: the cache policy to
use, and possibly tunable parameters for the cache policy.  Three policies
are currently available: "smq" is the default policy, "mq" is an older
implementation, and "cleaner" is used to force the cache to write back
(flush) all cached writes to the origin LV.

The "mq" policy has a number of tunable parameters. The defaults are
chosen to be suitable for the majority of systems, but in special
circumstances, changing the settings can improve performance.

With the \-\-cachepolicy and \-\-cachesettings options, the cache policy
and settings can be set when creating a cache LV, or changed on an
existing cache LV (both options can be used together).  The current cache
policy and settings of a cache LV can be displayed with the cache_policy
and cache_settings reporting options:

.B lvs \-o+cache_policy,cache_settings VG/CacheLV

.I Example
.nf
Change the cache policy and settings of an existing cache LV.
# lvchange \-\-cachepolicy mq \-\-cachesettings \\
	\(aqmigration_threshold=2048 random_threshold=4\(aq vg/lv1
.fi

.BR lvm.conf (5)
.B allocation/cache_policy
.br
defines the default cache policy.

.BR lvm.conf (5)
.B allocation/cache_settings
.br
defines the default cache settings.


.SS Spare metadata LV

\&

See
.BR lvmthin (7)
for a description of the "pool metadata spare" LV.
The same concept is used for cache pools.

.SS Automatic pool metadata LV

\&

A cache data LV can be converted to cache pool LV without specifying a
cache pool metadata LV.  LVM will automatically create a metadata LV from
the same VG.

.B lvcreate -n CacheDataLV -L CacheSize VG
.br
.B lvconvert --type cache\-pool VG/CacheDataLV


.SS Create a new cache LV without an existing origin LV

\&

A cache LV can be created using an existing cache pool without an existing
origin LV.  A new origin LV is created and linked to the cache pool in a
single step.

.B lvcreate \-\-type cache \-L LargeSize \-n CacheLV
.RS
.B \-\-cachepool VG/CachePoolLV VG SlowPVs
.RE


.SS Single step cache pool LV creation

\&

A cache pool LV can be created with a single lvcreate command, rather than
using lvconvert on existing LVs.  This one command creates a cache data
LV, a cache metadata LV, and combines the two into a cache pool LV.

.B lvcreate \-\-type cache\-pool \-L CacheSize \-n CachePoolLV VG FastPVs


.SS Convert existing LVs to cache types

\&

When an existing origin LV is converted to a cache LV, the specified cache
pool may be a normal LV, rather than a cache pool LV.  In this case, lvm
will first convert the normal LV to a cache pool LV.  A pool metadata LV
may optionally be specified.

.B lvcreate -n OriginLV -L LargeSize VG
.br
.B lvcreate -n CacheDataLV -L CacheSize VG
.br
.B lvconvert --type cache --cachepool VG/CataDataLV VG/OriginLV

This is equivalent to:

.B lvcreate -n OriginLV -L LargeSize VG
.br
.B lvcreate -n CacheDataLV -L CacheSize VG
.br
.B lvconvert --type cache-pool VG/CacheDataLV
.br
.B lvconvert --type cache --cachepool VG/CachePoolLV VG/OriginLV


.SH SEE ALSO
.BR lvm.conf (5),
.BR lvchange (8),
.BR lvcreate (8),
.BR lvdisplay (8),
.BR lvextend (8),
.BR lvremove (8),
.BR lvrename (8),
.BR lvresize (8),
.BR lvs (8),
.BR vgchange (8),
.BR vgmerge (8),
.BR vgreduce (8),
.BR vgsplit (8)