2008-10-30 18:31:33 +03:00
/*
* Copyright ( C ) 2001 - 2003 Sistina Software ( UK ) Limited .
* Copyright ( C ) 2004 - 2005 Red Hat , Inc . All rights reserved .
*
* This file is released under the LGPL .
*/
# ifndef _LINUX_DM_IOCTL_V4_H
# define _LINUX_DM_IOCTL_V4_H
# ifdef linux
# include <linux / types.h>
# endif
# define DM_DIR "mapper" /* Slashes not supported */
# define DM_MAX_TYPE_NAME 16
# define DM_NAME_LEN 128
# define DM_UUID_LEN 129
/*
* A traditional ioctl interface for the device mapper .
*
* Each device can have two tables associated with it , an
* ' active ' table which is the one currently used by io passing
* through the device , and an ' inactive ' one which is a table
* that is being prepared as a replacement for the ' active ' one .
*
* DM_VERSION :
* Just get the version information for the ioctl interface .
*
* DM_REMOVE_ALL :
* Remove all dm devices , destroy all tables . Only really used
* for debug .
*
* DM_LIST_DEVICES :
* Get a list of all the dm device names .
*
* DM_DEV_CREATE :
* Create a new device , neither the ' active ' or ' inactive ' table
* slots will be filled . The device will be in suspended state
* after creation , however any io to the device will get errored
* since it will be out - of - bounds .
*
* DM_DEV_REMOVE :
* Remove a device , destroy any tables .
*
* DM_DEV_RENAME :
* Rename a device .
*
* DM_SUSPEND :
* This performs both suspend and resume , depending which flag is
* passed in .
* Suspend : This command will not return until all pending io to
* the device has completed . Further io will be deferred until
* the device is resumed .
* Resume : It is no longer an error to issue this command on an
* unsuspended device . If a table is present in the ' inactive '
* slot , it will be moved to the active slot , then the old table
* from the active slot will be _destroyed_ . Finally the device
* is resumed .
*
* DM_DEV_STATUS :
* Retrieves the status for the table in the ' active ' slot .
*
* DM_DEV_WAIT :
* Wait for a significant event to occur to the device . This
* could either be caused by an event triggered by one of the
* targets of the table in the ' active ' slot , or a table change .
*
* DM_TABLE_LOAD :
* Load a table into the ' inactive ' slot for the device . The
* device does _not_ need to be suspended prior to this command .
*
* DM_TABLE_CLEAR :
* Destroy any table in the ' inactive ' slot ( ie . abort ) .
*
* DM_TABLE_DEPS :
* Return a set of device dependencies for the ' active ' table .
*
* DM_TABLE_STATUS :
* Return the targets status for the ' active ' table .
*
* DM_TARGET_MSG :
* Pass a message string to the target at a specific offset of a device .
*
* DM_DEV_SET_GEOMETRY :
* Set the geometry of a device by passing in a string in this format :
*
* " cylinders heads sectors_per_track start_sector "
*
* Beware that CHS geometry is nearly obsolete and only provided
* for compatibility with dm devices that can be booted by a PC
* BIOS . See struct hd_geometry for range limits . Also note that
* the geometry is erased if the device size changes .
*/
/*
* All ioctl arguments consist of a single chunk of memory , with
* this structure at the start . If a uuid is specified any
* lookup ( eg . for a DM_INFO ) will be done on that , * not * the
* name .
*/
struct dm_ioctl {
/*
* The version number is made up of three parts :
* major - no backward or forward compatibility ,
* minor - only backwards compatible ,
* patch - both backwards and forwards compatible .
*
* All clients of the ioctl interface should fill in the
* version number of the interface that they were
* compiled with .
*
* All recognised ioctl commands ( ie . those that don ' t
* return - ENOTTY ) fill out this field , even if the
* command failed .
*/
uint32_t version [ 3 ] ; /* in/out */
uint32_t data_size ; /* total size of data passed in
* including this struct */
uint32_t data_start ; /* offset to start of data
* relative to start of this struct */
uint32_t target_count ; /* in/out */
int32_t open_count ; /* out */
uint32_t flags ; /* in/out */
2009-08-03 22:44:54 +04:00
/*
* event_nr holds either the event number ( input and output ) or the
* udev cookie value ( input only ) .
* The DM_DEV_WAIT ioctl takes an event number as input .
* The DM_SUSPEND , DM_DEV_REMOVE and DM_DEV_RENAME ioctls
* use the field as a cookie to return in the DM_COOKIE
* variable with the uevents they issue .
* For output , the ioctls return the event number , not the cookie .
*/
2008-10-30 18:31:33 +03:00
uint32_t event_nr ; /* in/out */
uint32_t padding ;
uint64_t dev ; /* in/out */
char name [ DM_NAME_LEN ] ; /* device name */
char uuid [ DM_UUID_LEN ] ; /* unique identifier for
* the block device */
char data [ 7 ] ; /* padding or data */
} ;
/*
* Used to specify tables . These structures appear after the
* dm_ioctl .
*/
struct dm_target_spec {
uint64_t sector_start ;
uint64_t length ;
int32_t status ; /* used when reading from kernel only */
/*
* Location of the next dm_target_spec .
* - When specifying targets on a DM_TABLE_LOAD command , this value is
* the number of bytes from the start of the " current " dm_target_spec
* to the start of the " next " dm_target_spec .
* - When retrieving targets on a DM_TABLE_STATUS command , this value
* is the number of bytes from the start of the first dm_target_spec
* ( that follows the dm_ioctl struct ) to the start of the " next "
* dm_target_spec .
*/
uint32_t next ;
char target_type [ DM_MAX_TYPE_NAME ] ;
/*
* Parameter string starts immediately after this object .
* Be careful to add padding after string to ensure correct
* alignment of subsequent dm_target_spec .
*/
} ;
/*
* Used to retrieve the target dependencies .
*/
struct dm_target_deps {
uint32_t count ; /* Array size */
uint32_t padding ; /* unused */
uint64_t dev [ 0 ] ; /* out */
} ;
/*
* Used to get a list of all dm devices .
*/
struct dm_name_list {
uint64_t dev ;
uint32_t next ; /* offset to the next record from
the _start_ of this */
char name [ 0 ] ;
} ;
/*
* Used to retrieve the target versions
*/
struct dm_target_versions {
uint32_t next ;
uint32_t version [ 3 ] ;
char name [ 0 ] ;
} ;
/*
* Used to pass message to a target
*/
struct dm_target_msg {
uint64_t sector ; /* Device sector */
char message [ 0 ] ;
} ;
/*
* If you change this make sure you make the corresponding change
* to dm - ioctl . c : lookup_ioctl ( )
*/
enum {
/* Top level cmds */
DM_VERSION_CMD = 0 ,
DM_REMOVE_ALL_CMD ,
DM_LIST_DEVICES_CMD ,
/* device level cmds */
DM_DEV_CREATE_CMD ,
DM_DEV_REMOVE_CMD ,
DM_DEV_RENAME_CMD ,
DM_DEV_SUSPEND_CMD ,
DM_DEV_STATUS_CMD ,
DM_DEV_WAIT_CMD ,
/* Table level cmds */
DM_TABLE_LOAD_CMD ,
DM_TABLE_CLEAR_CMD ,
DM_TABLE_DEPS_CMD ,
DM_TABLE_STATUS_CMD ,
/* Added later */
DM_LIST_VERSIONS_CMD ,
DM_TARGET_MSG_CMD ,
DM_DEV_SET_GEOMETRY_CMD
} ;
# define DM_IOCTL 0xfd
# define DM_VERSION _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
# define DM_REMOVE_ALL _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
# define DM_LIST_DEVICES _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
# define DM_DEV_CREATE _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
# define DM_DEV_REMOVE _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
# define DM_DEV_RENAME _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
# define DM_DEV_SUSPEND _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
# define DM_DEV_STATUS _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
# define DM_DEV_WAIT _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
# define DM_TABLE_LOAD _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
# define DM_TABLE_CLEAR _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
# define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
# define DM_TABLE_STATUS _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
# define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
# define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
# define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
# define DM_VERSION_MAJOR 4
2009-08-03 22:44:54 +04:00
# define DM_VERSION_MINOR 15
2008-10-30 18:31:33 +03:00
# define DM_VERSION_PATCHLEVEL 0
2009-08-03 22:44:54 +04:00
# define DM_VERSION_EXTRA "-ioctl (2009-04-01)"
2008-10-30 18:31:33 +03:00
/* Status bits */
# define DM_READONLY_FLAG (1 << 0) /* In/Out */
# define DM_SUSPEND_FLAG (1 << 1) /* In/Out */
# define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */
/*
* Flag passed into ioctl STATUS command to get table information
* rather than current status .
*/
# define DM_STATUS_TABLE_FLAG (1 << 4) /* In */
/*
* Flags that indicate whether a table is present in either of
* the two table slots that a device has .
*/
# define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */
# define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
/*
* Indicates that the buffer passed in wasn ' t big enough for the
* results .
*/
# define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */
/*
* This flag is now ignored .
*/
# define DM_SKIP_BDGET_FLAG (1 << 9) /* In */
/*
* Set this to avoid attempting to freeze any filesystem when suspending .
*/
# define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */
/*
* Set this to suspend without flushing queued ios .
*/
# define DM_NOFLUSH_FLAG (1 << 11) /* In */
# endif /* _LINUX_DM_IOCTL_H */