lvm2/man/pvscan.8_pregen

.TH PVSCAN 8 "LVM TOOLS #VERSION#" "Red Hat, Inc."
.SH NAME
pvscan - List all physical volumes
.
.SH SYNOPSIS
\fBpvscan\fP \fIoption_args\fP
.br
    [ \fIoption_args\fP ]
.br
    [ \fIposition_args\fP ]
.br
.SH DESCRIPTION
When called without the --cache option, pvscan lists PVs on the system,
like
.BR pvs (8)
or
.BR pvdisplay (8).

When the --cache and -aay options are used, pvscan records which PVs are
available on the system, and activates LVs in completed VGs.  A VG is
complete when pvscan sees that the final PV in the VG has appeared.  This
is used by event-based system startup (systemd, udev) to activate LVs.

The four main variations of this are:

.B pvscan --cache
.IR device

If device is present, lvm adds a record that the PV on device is online.
If device is not present, lvm removes the online record for the PV.
In most cases, the pvscan will only read the named devices.

.B pvscan --cache -aay
.IR device ...

This begins by performing the same steps as above.  Afterward, if the VG
for the specified PV is complete, then pvscan will activate LVs in the VG
(the same as vgchange -aay vgname would do.)

.B pvscan --cache

This first clears all existing PV online records, then scans all devices
on the system, adding PV online records for any PVs that are found.

.B pvscan --cache -aay

This begins by performing the same steps as pvscan --cache.  Afterward, it
activates LVs in any complete VGs.

To prevent devices from being scanned by pvscan --cache, add them
to
.BR lvm.conf (5)
.B devices/global_filter.
For more information, see:
.br
.B lvmconfig --withcomments devices/global_filter

Auto-activation of VGs or LVs can be enabled/disabled using:
.br
.BR lvm.conf (5)
.B activation/auto_activation_volume_list

For more information, see:
.br
.B lvmconfig --withcomments activation/auto_activation_volume_list

To disable auto-activation, explicitly set this list to an empty list,
i.e. auto_activation_volume_list = [ ].

When this setting is undefined (e.g. commented), then all LVs are
auto-activated.

.SH USAGE
Display PV information.
.br
.P
\fBpvscan\fP
.br
.RS 4
.ad l
[ \fB-e\fP|\fB--exported\fP ]
.ad b
.br
.ad l
[ \fB-n\fP|\fB--novolumegroup\fP ]
.ad b
.br
.ad l
[ \fB-s\fP|\fB--short\fP ]
.ad b
.br
.ad l
[ \fB-u\fP|\fB--uuid\fP ]
.ad b
.br
[ COMMON_OPTIONS ]
.RE
.br

Autoactivate a VG when all PVs are online.
.br
.P
\fBpvscan\fP \fB--cache\fP
.br
.RS 4
.ad l
[ \fB-a\fP|\fB--activate\fP \fBay\fP ]
.ad b
.br
.ad l
[ \fB-j\fP|\fB--major\fP \fINumber\fP ]
.ad b
.br
.ad l
[    \fB--minor\fP \fINumber\fP ]
.ad b
.br
.ad l
[    \fB--noudevsync\fP ]
.ad b
.br
[ COMMON_OPTIONS ]
.RE
.br
.RS 4
[ \fIString\fP|\fIPV\fP ... ]
.RE

Common options for command:
.
.RS 4
.ad l
[    \fB--ignorelockingfailure\fP ]
.ad b
.br
.ad l
[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
.ad b
.RE

Common options for lvm:
.
.RS 4
.ad l
[ \fB-d\fP|\fB--debug\fP ]
.ad b
.br
.ad l
[ \fB-h\fP|\fB--help\fP ]
.ad b
.br
.ad l
[ \fB-q\fP|\fB--quiet\fP ]
.ad b
.br
.ad l
[ \fB-t\fP|\fB--test\fP ]
.ad b
.br
.ad l
[ \fB-v\fP|\fB--verbose\fP ]
.ad b
.br
.ad l
[ \fB-y\fP|\fB--yes\fP ]
.ad b
.br
.ad l
[    \fB--commandprofile\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--config\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.ad b
.br
.ad l
[    \fB--lockopt\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--longhelp\fP ]
.ad b
.br
.ad l
[    \fB--nolocking\fP ]
.ad b
.br
.ad l
[    \fB--profile\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--version\fP ]
.ad b
.RE
.SH OPTIONS
.HP
.ad l
\fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP
.br
Auto-activate LVs in a VG when the PVs scanned have completed the VG.
(Only \fBay\fP is applicable.)
.ad b
.HP
.ad l
\fB--cache\fP
.br
Scan one or more devices and record that they are online.
.ad b
.HP
.ad l
\fB--commandprofile\fP \fIString\fP
.br
The command profile to use for command configuration.
See \fBlvm.conf\fP(5) for more information about profiles.
.ad b
.HP
.ad l
\fB--config\fP \fIString\fP
.br
Config settings for the command. These override lvm.conf settings.
The String arg uses the same format as lvm.conf,
or may use section/field syntax.
See \fBlvm.conf\fP(5) for more information about config.
.ad b
.HP
.ad l
\fB-d\fP|\fB--debug\fP ...
.br
Set debug level. Repeat from 1 to 6 times to increase the detail of
messages sent to the log file and/or syslog (if configured).
.ad b
.HP
.ad l
\fB--driverloaded\fP \fBy\fP|\fBn\fP
.br
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
.ad b
.HP
.ad l
\fB-e\fP|\fB--exported\fP
.br
Only show PVs belonging to exported VGs.
.ad b
.HP
.ad l
\fB-h\fP|\fB--help\fP
.br
Display help text.
.ad b
.HP
.ad l
\fB--ignorelockingfailure\fP
.br
Allows a command to continue with read-only metadata
operations after locking failures.
.ad b
.HP
.ad l
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
\fB--longhelp\fP
.br
Display long help text.
.ad b
.HP
.ad l
\fB-j\fP|\fB--major\fP \fINumber\fP
.br
The major number of a device.
.ad b
.HP
.ad l
\fB--minor\fP \fINumber\fP
.br
The minor number of a device.
.ad b
.HP
.ad l
\fB--nolocking\fP
.br
Disable locking.
.ad b
.HP
.ad l
\fB--noudevsync\fP
.br
Disables udev synchronisation. The process will not wait for notification
from udev. It will continue irrespective of any possible udev processing
in the background. Only use this if udev is not running or has rules that
ignore the devices LVM creates.
.ad b
.HP
.ad l
\fB-n\fP|\fB--novolumegroup\fP
.br
Only show PVs not belonging to any VG.
.ad b
.HP
.ad l
\fB--profile\fP \fIString\fP
.br
An alias for --commandprofile or --metadataprofile, depending
on the command.
.ad b
.HP
.ad l
\fB-q\fP|\fB--quiet\fP ...
.br
Suppress output and log messages. Overrides --debug and --verbose.
Repeat once to also suppress any prompts with answer 'no'.
.ad b
.HP
.ad l
\fB--reportformat\fP \fBbasic\fP|\fBjson\fP
.br
Overrides current output format for reports which is defined globally by
the report/output_format setting in lvm.conf.
\fBbasic\fP is the original format with columns and rows.
If there is more than one report per command, each report is prefixed
with the report name for identification. \fBjson\fP produces report
output in JSON format. See \fBlvmreport\fP(7) for more information.
.ad b
.HP
.ad l
\fB-s\fP|\fB--short\fP
.br
Short listing format.
.ad b
.HP
.ad l
\fB-t\fP|\fB--test\fP
.br
Run in test mode. Commands will not update metadata.
This is implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to unusual
error messages in multi-stage operations if a tool relies on reading
back metadata it believes has changed but hasn't.
.ad b
.HP
.ad l
\fB-u\fP|\fB--uuid\fP
.br
Show UUIDs in addition to device names.
.ad b
.HP
.ad l
\fB-v\fP|\fB--verbose\fP ...
.br
Set verbose level. Repeat from 1 to 4 times to increase the detail
of messages sent to stdout and stderr.
.ad b
.HP
.ad l
\fB--version\fP
.br
Display version information.
.ad b
.HP
.ad l
\fB-y\fP|\fB--yes\fP
.br
Do not prompt for confirmation interactively but always assume the
answer yes. Use with extreme caution.
(For automatic no, see -qq.)
.ad b
.SH VARIABLES
.HP
\fIPV\fP
.br
Physical Volume name, a device path under /dev.
For commands managing physical extents, a PV positional arg
generally accepts a suffix indicating a range (or multiple ranges)
of physical extents (PEs). When the first PE is omitted, it defaults
to the start of the device, and when the last PE is omitted it defaults to end.
Start and end range (inclusive): \fIPV\fP[\fB:\fP\fIPE\fP\fB-\fP\fIPE\fP]...
Start and length range (counting from 0): \fIPV\fP[\fB:\fP\fIPE\fP\fB+\fP\fIPE\fP]...
.HP
\fIString\fP
.br
See the option description for information about the string content.
.HP
\fISize\fP[UNIT]
.br
Size is an input number that accepts an optional unit.
Input units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024.
The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
m|M is megabytes, g|G is gigabytes, t|T is terabytes,
p|P is petabytes, e|E is exabytes.
(This should not be confused with the output control --units, where
capital letters mean multiple of 1000.)
.SH ENVIRONMENT VARIABLES
See \fBlvm\fP(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
.SH SEE ALSO

.BR lvm (8)
.BR lvm.conf (5)
.BR lvmconfig (8)

.BR pvchange (8)
.BR pvck (8)
.BR pvcreate (8)
.BR pvdisplay (8)
.BR pvmove (8)
.BR pvremove (8)
.BR pvresize (8)
.BR pvs (8)
.BR pvscan (8) 

.BR vgcfgbackup (8)
.BR vgcfgrestore (8)
.BR vgchange (8)
.BR vgck (8)
.BR vgcreate (8)
.BR vgconvert (8)
.BR vgdisplay (8)
.BR vgexport (8)
.BR vgextend (8)
.BR vgimport (8)
.BR vgimportclone (8)
.BR vgmerge (8)
.BR vgmknodes (8)
.BR vgreduce (8)
.BR vgremove (8)
.BR vgrename (8)
.BR vgs (8)
.BR vgscan (8)
.BR vgsplit (8) 

.BR lvcreate (8)
.BR lvchange (8)
.BR lvconvert (8)
.BR lvdisplay (8)
.BR lvextend (8)
.BR lvreduce (8)
.BR lvremove (8)
.BR lvrename (8)
.BR lvresize (8)
.BR lvs (8)
.BR lvscan (8)

.BR lvm-fullreport (8)
.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)

.BR dmeventd (8)
.BR lvmpolld (8)
.BR lvmlockd (8)
.BR lvmlockctl (8)
.BR cmirrord (8)
.BR lvmdbusd (8)

.BR lvmsystemid (7)
.BR lvmreport (7)
.BR lvmraid (7)
.BR lvmthin (7)
.BR lvmcache (7)