2001-09-21 16:37:43 +04:00
#
2004-03-30 23:35:44 +04:00
# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
2014-01-27 15:27:16 +04:00
# Copyright (C) 2004-2014 Red Hat, Inc. All rights reserved.
2001-09-21 16:37:43 +04:00
#
2007-09-21 14:16:45 +04:00
# This file is part of LVM2.
2001-09-21 16:37:43 +04:00
#
2004-03-30 23:35:44 +04:00
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU General Public License v.2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
2016-01-21 13:49:46 +03:00
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
2001-09-21 16:37:43 +04:00
srcdir = @srcdir@
top_srcdir = @top_srcdir@
2009-10-02 23:10:31 +04:00
top_builddir = @top_builddir@
2021-03-20 01:10:55 +03:00
abs_srcdir = @abs_srcdir@
2001-09-21 16:37:43 +04:00
2004-03-26 16:21:12 +03:00
SOURCES = \
2001-10-16 20:25:28 +04:00
activate/activate.c \
2003-07-05 02:34:56 +04:00
cache/lvmcache.c \
2018-08-27 22:53:09 +03:00
writecache/writecache.c \
2019-11-21 01:07:27 +03:00
integrity/integrity.c \
2018-04-30 12:11:23 +03:00
cache_segtype/cache.c \
2002-11-18 17:04:08 +03:00
commands/toolcontext.c \
2001-09-21 16:37:43 +04:00
config/config.c \
2001-10-25 15:38:19 +04:00
datastruct/btree.c \
2003-09-18 00:35:57 +04:00
datastruct/str_list.c \
2018-01-30 15:13:48 +03:00
device/bcache.c \
2018-05-03 11:34:41 +03:00
device/bcache-utils.c \
2001-10-03 16:46:17 +04:00
device/dev-cache.c \
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
device/device_id.c \
2014-12-12 14:55:41 +03:00
device/dev-ext.c \
2001-10-03 16:46:17 +04:00
device/dev-io.c \
2004-11-18 23:02:21 +03:00
device/dev-md.c \
devices: rework libudev usage
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
device/dev-mpath.c \
2009-03-17 16:59:56 +03:00
device/dev-swap.c \
2013-06-12 13:53:55 +04:00
device/dev-type.c \
2010-08-20 03:08:18 +04:00
device/dev-luks.c \
2015-10-12 10:09:11 +03:00
device/dev-dasd.c \
2018-05-01 22:32:15 +03:00
device/dev-lvm1-pool.c \
2001-10-22 18:39:12 +04:00
display/display.c \
2004-05-11 20:01:58 +04:00
error/errseg.c \
2009-10-16 21:41:49 +04:00
unknown/unknown.c \
2001-10-22 18:39:12 +04:00
filters/filter-composite.c \
2001-10-22 18:14:00 +04:00
filters/filter-persistent.c \
filters/filter-regex.c \
2004-02-13 17:46:04 +03:00
filters/filter-sysfs.c \
2004-04-16 20:12:04 +04:00
filters/filter-md.c \
filters: add firmware RAID filter
Just like MD filtering that detects components of software RAID (md),
add detection for firmware RAID.
We're not adding any native code to detect this - there are lots of
firmware RAIDs out there which is just out of LVM scope. However,
with current changes with which we're able to get device info from
external sources (e.g. external_device_info_source="udev"), we can
do this easily if the external device status source has this kind
of information - which is the case of "udev" source where the results
of blkid scans are stored.
This detection should cover all firmware RAIDs that blkid can detect and
which are identified as:
ID_FS_TYPE = {adaptec,ddf,hpt45x,hpt37x,isw,jmicron,lsi_mega,nvidia,promise_fasttrack,silicon_medley,via}_raid_member
2014-09-09 17:05:57 +04:00
filters/filter-fwraid.c \
2011-11-11 19:11:08 +04:00
filters/filter-mpath.c \
2013-08-14 02:26:58 +04:00
filters/filter-partitioned.c \
filters/filter-type.c \
2014-09-23 14:49:01 +04:00
filters/filter-usable.c \
2016-05-25 21:57:33 +03:00
filters/filter-internal.c \
2018-05-01 22:32:15 +03:00
filters/filter-signature.c \
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
filters/filter-deviceid.c \
2002-01-09 22:16:48 +03:00
format_text/archive.c \
2005-05-17 17:46:38 +04:00
format_text/archiver.c \
2001-12-20 14:52:54 +03:00
format_text/export.c \
format_text/flags.c \
2002-01-07 12:16:20 +03:00
format_text/format-text.c \
2001-12-20 14:52:54 +03:00
format_text/import.c \
2002-11-18 17:04:08 +03:00
format_text/import_vsn1.c \
format_text/text_label.c \
2008-06-25 20:52:27 +04:00
freeseg/freeseg.c \
2002-01-11 13:43:32 +03:00
label/label.c \
2018-12-07 23:35:22 +03:00
label/hints.c \
2002-04-11 18:10:32 +04:00
locking/file_locking.c \
2002-02-12 19:31:31 +03:00
locking/locking.c \
2001-09-21 16:37:43 +04:00
log/log.c \
2014-02-04 17:59:58 +04:00
metadata/cache_manip.c \
2019-09-24 23:28:02 +03:00
metadata/writecache_manip.c \
2019-11-21 01:07:27 +03:00
metadata/integrity_manip.c \
2010-09-30 17:05:45 +04:00
metadata/lv.c \
2001-11-06 13:29:56 +03:00
metadata/lv_manip.c \
2002-01-07 18:08:28 +03:00
metadata/merge.c \
2001-10-12 14:32:06 +04:00
metadata/metadata.c \
2003-04-30 19:24:49 +04:00
metadata/mirror.c \
2014-01-22 20:11:29 +04:00
metadata/pool_manip.c \
2010-09-30 17:05:20 +04:00
metadata/pv.c \
2020-01-14 23:12:20 +03:00
metadata/pv_list.c \
2005-04-20 00:58:25 +04:00
metadata/pv_manip.c \
2001-11-05 19:41:38 +03:00
metadata/pv_map.c \
2011-08-11 22:24:40 +04:00
metadata/raid_manip.c \
2004-09-16 22:40:56 +04:00
metadata/segtype.c \
2002-02-12 19:31:31 +03:00
metadata/snapshot_manip.c \
2011-09-06 23:25:42 +04:00
metadata/thin_manip.c \
2018-06-29 12:11:14 +03:00
metadata/vdo_manip.c \
2010-09-30 17:04:55 +04:00
metadata/vg.c \
2018-04-30 12:11:23 +03:00
mirror/mirrored.c \
2002-11-18 17:04:08 +03:00
misc/crc.c \
2005-10-17 22:00:02 +04:00
misc/lvm-exec.c \
2002-01-09 22:16:48 +03:00
misc/lvm-file.c \
2014-05-01 20:37:14 +04:00
misc/lvm-flock.c \
2008-10-30 20:27:28 +03:00
misc/lvm-globals.c \
2016-08-18 16:06:13 +03:00
misc/lvm-maths.c \
2014-05-01 20:37:14 +04:00
misc/lvm-signal.c \
2002-12-20 02:25:55 +03:00
misc/lvm-string.c \
2006-08-17 22:23:44 +04:00
misc/lvm-wrappers.c \
2010-11-30 14:53:31 +03:00
misc/lvm-percent.c \
2018-12-14 23:51:11 +03:00
misc/sharedlib.c \
2003-07-05 02:34:56 +04:00
mm/memlock.c \
2016-02-22 18:42:03 +03:00
notify/lvmnotify.c \
2013-07-12 21:09:44 +04:00
properties/prop_common.c \
2018-04-30 12:11:23 +03:00
raid/raid.c \
2010-08-20 16:44:47 +04:00
report/properties.c \
2002-12-12 23:55:49 +03:00
report/report.c \
2018-04-30 12:11:23 +03:00
snapshot/snapshot.c \
2004-05-05 01:25:57 +04:00
striped/striped.c \
2018-04-30 12:11:23 +03:00
thin/thin.c \
2004-05-11 20:01:58 +04:00
uuid/uuid.c \
2009-03-06 19:19:52 +03:00
zero/zero.c
2002-11-18 17:04:08 +03:00
2003-01-09 01:44:07 +03:00
i f e q ( "@DEVMAPPER@" , "yes" )
2004-03-26 16:21:12 +03:00
SOURCES += \
2003-01-09 01:44:07 +03:00
activate/dev_manager.c \
activate/fs.c
e n d i f
2015-05-09 02:59:18 +03:00
i f e q ( "@BUILD_LVMPOLLD@" , "yes" )
SOURCES += \
lvmpolld/lvmpolld-client.c
e n d i f
2015-03-05 23:00:44 +03:00
i f e q ( "@BUILD_LVMLOCKD@" , "yes" )
SOURCES += \
locking/lvmlockd.c
e n d i f
2018-06-29 12:11:14 +03:00
i f e q ( "@VDO@" , "internal" )
SOURCES += vdo/vdo.c
e n d i f
2009-03-06 19:17:28 +03:00
LIB_NAME = liblvm-internal
LIB_STATIC = $( LIB_NAME) .a
2001-09-21 16:37:43 +04:00
2010-03-29 18:11:17 +04:00
CFLOW_LIST = $( SOURCES)
CFLOW_LIST_TARGET = $( LIB_NAME) .cflow
2017-08-01 01:01:07 +03:00
PROGS_CFLAGS = $( BLKID_CFLAGS) $( UDEV_CFLAGS)
2001-09-21 16:37:43 +04:00
2017-08-01 01:01:07 +03:00
i n c l u d e $( top_builddir ) / m a k e . t m p l
2014-03-06 19:03:08 +04:00
2009-06-03 15:31:06 +04:00
$(SUBDIRS) : $( LIB_STATIC )
2015-09-08 15:33:29 +03:00
CLEAN_TARGETS += misc/configure.h misc/lvm-version.h
