shaba/lvm2
1
0
Fork 0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-30 17:18:21 +03:00
Code Releases Activity
bca6f58848
lvm2/lib/device/device_id.c

4227 lines
121 KiB
C
Raw Normal View History

device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Copyright (C) 2020 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "base/memory/zalloc.h"
#include "lib/misc/lib.h"
#include "lib/commands/toolcontext.h"
#include "lib/device/device.h"
#include "lib/device/device_id.h"
#include "lib/device/dev-type.h"
#include "lib/label/label.h"
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
#include "lib/misc/crc.h"
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
#include "lib/metadata/metadata.h"
#include "lib/format_text/layout.h"
#include "lib/cache/lvmcache.h"
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
#include "lib/datastruct/str_list.h"
#include "lib/metadata/metadata-exported.h"
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
#include <dirent.h>
#include <locale.h>
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
#include <sys/types.h>
#include <sys/file.h>
#include <sys/sysmacros.h>
#define DEVICES_FILE_MAJOR 1
#define DEVICES_FILE_MINOR 1
#define VERSION_LINE_MAX 256
static int _devices_fd = -1;
static int _using_devices_file;
static int _devices_file_locked;
static char _devices_lockfile[PATH_MAX];
static char _devices_file_version[VERSION_LINE_MAX];
static const char *_searched_file = DEFAULT_RUN_DIR "/searched_devnames";
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
static const char *_searched_file_new = DEFAULT_RUN_DIR "/searched_devnames_new";
static const char *_searched_file_dir = DEFAULT_RUN_DIR;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
/* Only for displaying in lvmdevices command output. */
char devices_file_hostname_orig[PATH_MAX];
char devices_file_product_uuid_orig[PATH_MAX];
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
/*
* The input string pvid may be of any length, it's often
* read from system.devices, which can be edited.
* These pvid strings are often compared to pvids in the
* form char pvid[ID_LEN+1] using memcmp with ID_LEN.
*
* . ignore any pvid characters over ID_LEN
* . return a buffer is ID_LEN+1 in size, even
* if the pvid string is shorter.
*/
char *strdup_pvid(char *pvid)
{
char *buf;
cov: ensure string ends with \0 Use dm_strncpy() that ensures \0 termination.
2024-03-25 02:53:02 +03:00
if (!(buf = malloc(ID_LEN + 1)))
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
return NULL;
cov: ensure string ends with \0 Use dm_strncpy() that ensures \0 termination.
2024-03-25 02:53:02 +03:00
(void)dm_strncpy(buf, pvid, ID_LEN + 1);
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
return buf;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
char *devices_file_version(void)
{
return _devices_file_version;
}
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
static void _searched_devnames_create(struct cmd_context *cmd,
int search_pvids_count, uint32_t search_pvids_hash,
int search_devs_count, uint32_t search_devs_hash)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
FILE *fp;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
time_t t;
int dir_fd;
int fflush_errno = 0;
int fclose_errno = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
/*
* cmd->devicesfile is set when using a devices file other
* than the default system.devices, and at least for now,
* the searched_devnames temp file is only used for commands
* using system.devices.
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (cmd->devicesfile)
return;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
unlink(_searched_file_new); /* in case previous file was left */
/*
* No file lock is used to coordinate concurrent attempts to create
* the temp file, so we expect this fopen may file sometimes.
*/
if (!(fp = fopen(_searched_file_new, "wx"))) {
log_debug("searched_devnames_create error fopen %d", errno);
return;
}
if ((dir_fd = open(_searched_file_dir, O_RDONLY)) < 0) {
log_debug("searched_devnames_create error open dir %d", errno);
fclose(fp);
unlink(_searched_file_new);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
}
t = time(NULL);
/* comment to help with debugging */
fprintf(fp, "# Created by LVM command %s pid %d system.devices %s at %s",
cmd->name, getpid(), _devices_file_version[0] ? _devices_file_version : "none", ctime(&t));
fprintf(fp, "pvids: %d %u\n", search_pvids_count, search_pvids_hash);
fprintf(fp, "devs: %d %u\n", search_devs_count, search_devs_hash);
if (fflush(fp))
fflush_errno = errno;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (fclose(fp))
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
fclose_errno = errno;
if (fflush_errno || fclose_errno) {
log_debug("searched_devnames_create error fflush %d fclose %d",
fflush_errno, fclose_errno);
unlink(_searched_file_new);
close(dir_fd);
return;
}
if (rename(_searched_file_new, _searched_file) < 0) {
log_debug("searched_devnames_create error rename %d", errno);
unlink(_searched_file_new);
close(dir_fd);
return;
}
if (fsync(dir_fd) < 0)
stack;
if (close(dir_fd) < 0)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
stack;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
log_debug("searched_devnames created pvids %d %u devs %d %u",
search_pvids_count, search_pvids_hash, search_devs_count, search_devs_hash);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
void unlink_searched_devnames(struct cmd_context *cmd)
{
if (cmd->devicesfile)
return;
if (unlink(_searched_file))
log_debug("unlink %s errno %d", _searched_file, errno);
device_id: searched_devnames improvements Remove the searched_devnames file in a couple more places: . When hints need refreshing it's possible that a missing devices file entry could be found by searching devices again. . When a devices file entry devname is first found to be incorrect, a new search for missing entries may be useful.
2021-11-16 20:26:41 +03:00
else
log_debug("unlink %s", _searched_file);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
/*
* Consistent hashes between commands depend on the devs and pvids being
* processed in the same order by each command. For devs this is true because
* we process the devs using dev_iter which is a btree ordered by devno keys.
* For pvids this is true because the cmd->use_devices list order comes from
* the order of lines in system.devices.
*/
static int _searched_devnames_exists(struct cmd_context *cmd,
int search_pvids_count, uint32_t search_pvids_hash,
int search_devs_count, uint32_t search_devs_hash)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
FILE *fp;
char line[PATH_MAX];
uint32_t pvids_hash_file = 0;
uint32_t devs_hash_file = 0;
int pvids_ok = 0;
int devs_ok = 0;
int pvids_count_file = 0;
int devs_count_file = 0;
int ret = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (cmd->devicesfile)
return 0;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
if (!(fp = fopen(_searched_file, "r")))
return 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
while (fgets(line, sizeof(line), fp)) {
if (line[0] == '#')
continue;
if (!strncmp(line, "pvids: ", 7)) {
if (sscanf(line + 7, "%d %u", &pvids_count_file, &pvids_hash_file) != 2)
goto out;
if (pvids_count_file != search_pvids_count)
goto out;
if (pvids_hash_file != search_pvids_hash)
goto out;
pvids_ok = 1;
} else if (!strncmp(line, "devs: ", 6)) {
if (sscanf(line + 6, "%d %u", &devs_count_file, &devs_hash_file) != 2)
goto out;
if (devs_count_file != search_devs_count)
goto out;
if (devs_hash_file != search_devs_hash)
goto out;
devs_ok = 1;
} else {
goto out;
}
}
if (pvids_ok && devs_ok)
ret = 1;
out:
cov: some stack tracing corrections Checking some returned values and adding/correcting some debug tracing.
2024-01-05 17:13:42 +03:00
if (fclose(fp))
log_sys_debug("fclose", _searched_file);
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
log_debug("searched_devnames %s file pvids %d %u devs %d %u search pvids %d %u devs %d %u",
ret ? "match" : "differ",
pvids_count_file, pvids_hash_file, devs_count_file, devs_hash_file,
search_pvids_count, search_pvids_hash, search_devs_count, search_devs_hash);
if (!ret)
unlink(_searched_file);
return ret;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
/*
* Check if the device_id saved in the VG metadata matches the actual device_id
* on the device used for the PV.
*/
int pv_device_id_is_stale(const struct physical_volume *pv)
{
struct dev_use *du;
if (!pv->vg || !pv->vg->cmd)
return 0;
if (!pv->device_id || !pv->device_id_type)
return 0;
if (!(du = get_du_for_dev(pv->vg->cmd, pv->dev)))
return 0;
if (!du->idname)
return 0;
if (du->idtype != idtype_from_str(pv->device_id_type))
return 1;
if (strcmp(du->idname, pv->device_id))
return 1;
return 0;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* How the devices file and device IDs are used by an ordinary command:
*
* 1. device_ids_read() reads the devices file, and adds a 'struct dev_use'
* to cmd->use_devices for each entry. These are the devices lvm
* can use, but we do not yet know which devnames they correspond to.
* 2. dev_cache_scan() gets a list of all devices (devnames) on the system,
* and adds a 'struct device' to dev-cache for each.
* 3. device_ids_match() matches du entries from the devices file
* with devices from dev-cache. With this complete, we know the
* devnames to use for each of the entries in the devices file.
* 4. label_scan (or equivalent) iterates through all devices in
* dev-cache, checks each one with filters, which excludes many,
* and reads lvm headers and metadata from the devs that pass the
* filters. lvmcache is populated with summary info about each PV
* during this phase.
* 5. device_ids_validate() checks if the PVIDs saved in the devices
* file are correct based on the PVIDs read from disk in the
* previous step. If not it updates the devices file.
*
* cmd->use_devices reflect the entries in the devices file.
* When reading the devices file, a 'du' struct is added to use_devices
* for each entry.
* When adding devices to the devices file, a new du struct is added
* to use_devices, and then a new file entry is written for each du.
*
* After reading the devices file, we want to match each du from
* the file to an actual device on the system. We look at struct device's
* in dev-cache to find one that matches each du, based on the device_id.
* When a match is made, du->dev is set, and DEV_MATCHED_USE_ID is set
* in the dev.
*
* After the use_devices entries are matched to system devices,
* label_scan can be called to filter and scan devices. After
* label_scan, device_ids_validate() is called to check if the
* PVID read from each device matches the PVID recorded in the
* devices file for the device.
*
* A device can have multiple device IDs, e.g. a dev could have
* both a wwid and a serial number, but only one of these IDs is
* used as the device ID in the devices file, e.g. the wwid is
* preferred so that would be used in the devices file.
* Each of the different types of device IDs can be saved in
* dev->ids list (struct dev_id). So, one dev may have multiple
* entries in dev->ids, e.g. one for wwid and one for serial.
* The dev_id struct that is actually being used for the device
* is set in dev->id.
* The reason for saving multiple IDs in dev->ids is because
* the process of matching devs to devices file entries can
* involve repeatedly checking other dev_id types for a given
* device, so we save each type as it is read to avoid rereading
* the same id type many times.
*/
void free_du(struct dev_use *du)
{
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->idname);
free(du->devname);
free(du->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
free(du);
}
void free_dus(struct dm_list *dus)
{
struct dev_use *du, *safe;
dm_list_iterate_items_safe(du, safe, dus) {
dm_list_del(&du->list);
free_du(du);
}
}
void free_did(struct dev_id *id)
{
device_id: no idname should be NULL not empty string One place was setting idname to "" instead of NULL when there was no idname value.
2023-10-18 00:49:30 +03:00
if (id->idname && strlen(id->idname))
free(id->idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
free(id);
}
void free_dids(struct dm_list *ids)
{
struct dev_id *id, *safe;
dm_list_iterate_items_safe(id, safe, ids) {
dm_list_del(&id->list);
free_did(id);
}
}
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
/* More than one _ in a row is replaced with one _ */
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
static void _reduce_repeating_underscores(char *buf, size_t bufsize)
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
{
char *tmpbuf;
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
unsigned us = 0, i, j = 0;
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (!(tmpbuf = strndup(buf, bufsize-1)))
return;
memset(buf, 0, bufsize);
for (i = 0; i < strlen(tmpbuf); i++) {
if (tmpbuf[i] == '_')
us++;
else
us = 0;
if (us == 1)
buf[j++] = '_';
else if (us > 1)
continue;
else
buf[j++] = tmpbuf[i];
if (j == bufsize)
break;
}
buf[bufsize-1] = '\0';
free(tmpbuf);
}
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
static void _remove_leading_underscores(char *buf, size_t bufsize)
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
{
char *tmpbuf;
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
unsigned i, j = 0;
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (buf[0] != '_')
return;
if (!(tmpbuf = strndup(buf, bufsize-1)))
return;
memset(buf, 0, bufsize);
for (i = 0; i < strlen(tmpbuf); i++) {
if (!j && tmpbuf[i] == '_')
continue;
buf[j++] = tmpbuf[i];
if (j == bufsize)
break;
}
free(tmpbuf);
}
static void _remove_trailing_underscores(char *buf, int bufsize)
{
char *end;
end = buf + strlen(buf) - 1;
while ((end > buf) && (*end == '_'))
end--;
end[1] = '\0';
}
filter-mpath: get wwids from sysfs vpd_pg83 to compare with wwids in /etc/multipath/wwids when excluding multipath components. The wwid printed from the sysfs wwid file may not be the wwid used in multipath wwids. Save the wwids found for each device on dev->wwids to avoid repeating reading and parsing the sysfs files.
2022-06-06 22:04:20 +03:00
static int _read_sys_block(struct cmd_context *cmd, struct device *dev,
const char *suffix, char *sysbuf, int sysbufsize,
int binary, int *retlen)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
char path[PATH_MAX];
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
const char *sysfs_dir;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_t devt = dev->dev;
dev_t prim = 0;
int ret;
cmd: save device_id_sysfs_dir read and save device_id_sysfs_dir to avoid spamming debug output from find_config_tree_str.
2022-10-25 00:15:53 +03:00
sysfs_dir = cmd->device_id_sysfs_dir ?: dm_sysfs_dir();
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
retry:
if (dm_snprintf(path, sizeof(path), "%sdev/block/%d:%d/%s",
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
sysfs_dir, (int)MAJOR(devt), (int)MINOR(devt), suffix) < 0) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
log_error("Failed to create sysfs path for %s", dev_name(dev));
return 0;
}
filter-mpath: get wwids from sysfs vpd_pg83 to compare with wwids in /etc/multipath/wwids when excluding multipath components. The wwid printed from the sysfs wwid file may not be the wwid used in multipath wwids. Save the wwids found for each device on dev->wwids to avoid repeating reading and parsing the sysfs files.
2022-06-06 22:04:20 +03:00
if (binary) {
ret = get_sysfs_binary(path, sysbuf, sysbufsize, retlen);
if (ret && !*retlen)
ret = 0;
} else {
ret = get_sysfs_value(path, sysbuf, sysbufsize, 0);
if (ret && !sysbuf[0])
ret = 0;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
filter-mpath: get wwids from sysfs vpd_pg83 to compare with wwids in /etc/multipath/wwids when excluding multipath components. The wwid printed from the sysfs wwid file may not be the wwid used in multipath wwids. Save the wwids found for each device on dev->wwids to avoid repeating reading and parsing the sysfs files.
2022-06-06 22:04:20 +03:00
if (ret) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
sysbuf[sysbufsize - 1] = '\0';
return 1;
}
if (prim)
goto fail;
/* in case it failed because dev is a partition... */
ret = dev_get_primary_dev(cmd->dev_types, dev, &prim);
if (ret == 2) {
devt = prim;
goto retry;
}
fail:
return 0;
}
filter-mpath: get wwids from sysfs vpd_pg83 to compare with wwids in /etc/multipath/wwids when excluding multipath components. The wwid printed from the sysfs wwid file may not be the wwid used in multipath wwids. Save the wwids found for each device on dev->wwids to avoid repeating reading and parsing the sysfs files.
2022-06-06 22:04:20 +03:00
int read_sys_block(struct cmd_context *cmd, struct device *dev,
const char *suffix, char *sysbuf, int sysbufsize)
{
return _read_sys_block(cmd, dev, suffix, sysbuf, sysbufsize, 0, NULL);
}
int read_sys_block_binary(struct cmd_context *cmd, struct device *dev,
const char *suffix, char *sysbuf, int sysbufsize,
int *retlen)
{
return _read_sys_block(cmd, dev, suffix, sysbuf, sysbufsize, 1, retlen);
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
static int _dm_uuid_has_prefix(char *sysbuf, const char *prefix)
{
if (!strncmp(sysbuf, prefix, strlen(prefix)))
return 1;
/*
* If it's a kpartx partitioned dm device the dm uuid will
* be part%d-<prefix>... e.g. part1-mpath-abc...
* Check for the prefix after the part%-
*/
if (!strncmp(sysbuf, "part", 4)) {
const char *dash = strchr(sysbuf, '-');
if (!dash)
return 0;
if (!strncmp(dash + 1, prefix, strlen(prefix)))
return 1;
}
return 0;
}
/* the dm uuid uses the wwid of the underlying dev */
devices: exclude multipath components based on matching wwid If multipath component devices get through the filter and cause lvm to see duplicate PVs, then check the wwid of the devs and drop the component devices as if they had been filtered. If a dm mpath device was found among the duplicates then use that as the PV, otherwise do not use any of the components as the PV. "duplicate PVs" associated with multipath configs will no longer stop commands from working.
2021-11-18 02:10:45 +03:00
int dev_has_mpath_uuid(struct cmd_context *cmd, struct device *dev, const char **idname_out)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
char sysbuf[PATH_MAX] = { 0 };
const char *idname;
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if (!read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
if (!_dm_uuid_has_prefix(sysbuf, "mpath-"))
return 0;
if (!idname_out)
return 1;
if (!(idname = strdup(sysbuf)))
return_0;
*idname_out = idname;
return 1;
}
static int _dev_has_crypt_uuid(struct cmd_context *cmd, struct device *dev, const char **idname_out)
{
char sysbuf[PATH_MAX] = { 0 };
const char *idname;
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if (!read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
if (!_dm_uuid_has_prefix(sysbuf, "CRYPT-"))
return 0;
if (!idname_out)
return 1;
if (!(idname = strdup(sysbuf)))
return_0;
*idname_out = idname;
return 1;
}
static int _dev_has_lvmlv_uuid(struct cmd_context *cmd, struct device *dev, const char **idname_out)
{
char sysbuf[PATH_MAX] = { 0 };
const char *idname;
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if (!read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
if (!_dm_uuid_has_prefix(sysbuf, "LVM-"))
return 0;
if (!idname_out)
return 1;
if (!(idname = strdup(sysbuf)))
return_0;
*idname_out = idname;
return 1;
}
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
/*
* The numbers 1,2,3 for NAA,EUI,T10 are part of the standard
* and are used in the vpd data.
*/
static int _wwid_type_num(char *id)
{
if (!strncmp(id, "naa.", 4))
return 3;
else if (!strncmp(id, "eui.", 4))
return 2;
else if (!strncmp(id, "t10.", 4))
return 1;
else
device_id: improve handling of non-standard wwid prefixes
2023-10-16 23:09:17 +03:00
return 0; /* any unrecognized, non-standard prefix */
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
}
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
int wwid_type_to_idtype(int wwid_type)
{
switch (wwid_type) {
case 3: return DEV_ID_TYPE_WWID_NAA;
case 2: return DEV_ID_TYPE_WWID_EUI;
case 1: return DEV_ID_TYPE_WWID_T10;
device_id: improve handling of non-standard wwid prefixes
2023-10-16 23:09:17 +03:00
case 0: return DEV_ID_TYPE_SYS_WWID;
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
default: return -1;
}
}
int idtype_to_wwid_type(int idtype)
{
switch (idtype) {
case DEV_ID_TYPE_WWID_NAA: return 3;
case DEV_ID_TYPE_WWID_EUI: return 2;
case DEV_ID_TYPE_WWID_T10: return 1;
device_id: improve handling of non-standard wwid prefixes
2023-10-16 23:09:17 +03:00
case DEV_ID_TYPE_SYS_WWID: return 0;
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
default: return -1;
}
}
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
void free_wwids(struct dm_list *ids)
{
struct dev_wwid *dw, *safe;
dm_list_iterate_items_safe(dw, safe, ids) {
dm_list_del(&dw->list);
free(dw);
}
}
/*
* wwid type 8 "scsi name string" (which includes "iqn" names) is
* included in vpd_pg83, but we currently do not use these for
* device ids (maybe in the future.)
* They can still be checked by dev-mpath when looking for a device
* in /etc/multipath/wwids.
*/
struct dev_wwid *dev_add_wwid(char *id, int id_type, struct dm_list *ids)
{
struct dev_wwid *dw;
int len;
device_id: improve handling of non-standard wwid prefixes
2023-10-16 23:09:17 +03:00
if (!id_type)
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
id_type = _wwid_type_num(id);
if (!(dw = zalloc(sizeof(struct dev_wwid))))
return NULL;
len = strlen(id);
if (len >= DEV_WWID_SIZE)
len = DEV_WWID_SIZE - 1;
memcpy(dw->id, id, len);
dw->type = id_type;
dm_list_add(ids, &dw->list);
return dw;
}
#define VPD_SIZE 4096
int dev_read_vpd_wwids(struct cmd_context *cmd, struct device *dev)
{
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char vpd_data[VPD_SIZE] = { 0 };
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
int vpd_datalen = 0;
dev->flags |= DEV_ADDED_VPD_WWIDS;
if (!read_sys_block_binary(cmd, dev, "device/vpd_pg83", (char *)vpd_data, VPD_SIZE, &vpd_datalen))
return 0;
if (!vpd_datalen)
return 0;
/* adds dev_wwid entry to dev->wwids for each id in vpd data */
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
parse_vpd_ids((const unsigned char *)vpd_data, vpd_datalen, &dev->wwids);
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
return 1;
}
int dev_read_sys_wwid(struct cmd_context *cmd, struct device *dev,
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char *outbuf, int outbufsize, struct dev_wwid **dw_out)
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
{
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char buf[DEV_WWID_SIZE] = { 0 };
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
struct dev_wwid *dw;
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
int is_t10 = 0;
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
int ret;
unsigned i;
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
dev->flags |= DEV_ADDED_SYS_WWID;
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
ret = read_sys_block(cmd, dev, "device/wwid", buf, sizeof(buf));
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
if (!ret || !buf[0]) {
/* the wwid file is not under device for nvme devs */
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
ret = read_sys_block(cmd, dev, "wwid", buf, sizeof(buf));
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
}
if (!ret || !buf[0])
return 0;
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
for (i = 0; i < sizeof(buf) - 4; i++) {
if (buf[i] == ' ')
continue;
if (!strncmp(&buf[i], "t10", 3))
is_t10 = 1;
break;
device id: change space handling in t10 wwid t10 wwids are now edited in the same way that multipath does, which is replacing a series of spaces with one _. Previously lvm replaced every space with one _. Devices file entries with the old form will be converted to the new shorter form.
2022-08-31 23:59:28 +03:00
}
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
/*
* Remove leading and trailing spaces.
* Replace internal spaces with underscores.
* t10 wwids have multiple sequential spaces
* replaced by a single underscore.
*/
if (is_t10)
format_t10_id((const unsigned char *)buf, sizeof(buf), (unsigned char *)outbuf, outbufsize);
else
format_general_id((const char *)buf, sizeof(buf), (unsigned char *)outbuf, outbufsize);
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
/* Note, if wwids are also read from vpd, this same wwid will be added again. */
if (!(dw = dev_add_wwid(buf, 0, &dev->wwids)))
return_0;
if (dw_out)
*dw_out = dw;
return 1;
}
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
static int _dev_read_sys_serial(struct cmd_context *cmd, struct device *dev,
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char *outbuf, int outbufsize)
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
{
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char buf[VPD_SIZE] = { 0 };
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
const char *devname;
int vpd_datalen = 0;
/*
* Look in
* /sys/dev/block/major:minor/device/serial
* /sys/dev/block/major:minor/device/vpd_pg80
* /sys/class/block/vda/serial
* (Only virtio disks /dev/vdx are known to use /sys/class/block/vdx/serial.)
*/
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
read_sys_block(cmd, dev, "device/serial", buf, sizeof(buf));
if (buf[0]) {
format_general_id((const char *)buf, sizeof(buf), (unsigned char *)outbuf, outbufsize);
if (outbuf[0])
return 1;
}
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (read_sys_block_binary(cmd, dev, "device/vpd_pg80", buf, VPD_SIZE, &vpd_datalen) && vpd_datalen) {
parse_vpd_serial((const unsigned char *)buf, outbuf, outbufsize);
if (outbuf[0])
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
return 1;
}
devname = dev_name(dev);
if (!strncmp(devname, "/dev/vd", 7)) {
char path[PATH_MAX];
char vdx[8] = { 0 };
const char *sysfs_dir;
const char *base;
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
unsigned i, j = 0;
int ret;
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
/* /dev/vda to vda */
base = basename(devname);
/* vda1 to vda */
for (i = 0; i < strlen(base); i++) {
if (isdigit(base[i]))
break;
vdx[j] = base[i];
j++;
}
sysfs_dir = cmd->device_id_sysfs_dir ?: dm_sysfs_dir();
if (dm_snprintf(path, sizeof(path), "%s/class/block/%s/serial", sysfs_dir, vdx) < 0)
return 0;
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
ret = get_sysfs_value(path, buf, sizeof(buf), 0);
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
if (ret && !buf[0])
ret = 0;
if (ret) {
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
format_general_id((const char *)buf, sizeof(buf), (unsigned char *)outbuf, outbufsize);
if (buf[0])
return 1;
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
}
}
return 0;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
const char *device_id_system_read(struct cmd_context *cmd, struct device *dev, uint16_t idtype)
{
char sysbuf[PATH_MAX] = { 0 };
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char sysbuf2[PATH_MAX] = { 0 };
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
const char *idname = NULL;
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
struct dev_wwid *dw;
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
unsigned i;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: accept wwids containing QEMU HARDDISK A wwid may be useful even when it contains the string "QEMU HARDDISK", so allow these to be used.
2023-10-16 23:11:29 +03:00
if (idtype == DEV_ID_TYPE_SYS_WWID)
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
dev_read_sys_wwid(cmd, dev, sysbuf, sizeof(sysbuf), NULL);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: accept wwids containing QEMU HARDDISK A wwid may be useful even when it contains the string "QEMU HARDDISK", so allow these to be used.
2023-10-16 23:11:29 +03:00
else if (idtype == DEV_ID_TYPE_SYS_SERIAL)
device_id: look for serial number in other locations Only /sys/dev/block/major:minor/device/serial was read to find a disk serial number, but a serial number seems to be reported more often in other locations, so check these also: /sys/dev/block/major:minor/device/vpd_pg80 /sys/class/block/vda/serial (for virtio disks only)
2022-10-25 00:23:36 +03:00
_dev_read_sys_serial(cmd, dev, sysbuf, sizeof(sysbuf));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
else if (idtype == DEV_ID_TYPE_MPATH_UUID) {
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf));
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
/* if (strncmp(sysbuf, "mpath", 5)) sysbuf[0] = '\0'; */
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
else if (idtype == DEV_ID_TYPE_CRYPT_UUID) {
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf));
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
/* if (strncmp(sysbuf, "CRYPT", 5)) sysbuf[0] = '\0'; */
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
else if (idtype == DEV_ID_TYPE_LVMLV_UUID) {
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf));
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
/* if (strncmp(sysbuf, "LVM", 3)) sysbuf[0] = '\0'; */
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
else if (idtype == DEV_ID_TYPE_MD_UUID) {
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
read_sys_block(cmd, dev, "md/uuid", sysbuf, sizeof(sysbuf));
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: don't use deleted loop backing file for device id check for "(deleted)" in the backing_file string and fall back to devname for id. $ cat /sys/block/loop0/loop/backing_file /root/looptmp (deleted)
2021-06-08 20:16:06 +03:00
else if (idtype == DEV_ID_TYPE_LOOP_FILE) {
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
read_sys_block(cmd, dev, "loop/backing_file", sysbuf, sizeof(sysbuf));
devices: don't use deleted loop backing file for device id check for "(deleted)" in the backing_file string and fall back to devname for id. $ cat /sys/block/loop0/loop/backing_file /root/looptmp (deleted)
2021-06-08 20:16:06 +03:00
/* if backing file is deleted, fall back to devname */
if (strstr(sysbuf, "(deleted)"))
sysbuf[0] = '\0';
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
else if (idtype == DEV_ID_TYPE_DEVNAME) {
devices: fix dev_name assumptions dev_name(dev) returns "[unknown]" if there are no names on dev->aliases. It's meant mainly for log messages. Many places assume a valid path name is returned, and use it directly. A caller that wants to use the path from dev_name() must first check if the dev has any paths with dm_list_empty(&dev->aliases).
2022-02-23 00:03:11 +03:00
if (dm_list_empty(&dev->aliases))
goto_bad;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!(idname = strdup(dev_name(dev))))
goto_bad;
return idname;
}
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
else if (idtype == DEV_ID_TYPE_WWID_NAA ||
idtype == DEV_ID_TYPE_WWID_EUI ||
idtype == DEV_ID_TYPE_WWID_T10) {
if (!(dev->flags & DEV_ADDED_VPD_WWIDS))
dev_read_vpd_wwids(cmd, dev);
dm_list_iterate_items(dw, &dev->wwids) {
if (idtype_to_wwid_type(idtype) == dw->type)
return strdup(dw->id);
}
return NULL;
}
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
/*
* Replace all spaces, quotes, control chars with underscores.
* sys_wwid, sys_serial, and wwid_* have already been handled,
* and with slightly different replacement (see format_t10_id,
* format_general_id.)
*/
if ((idtype != DEV_ID_TYPE_SYS_WWID) &&
(idtype != DEV_ID_TYPE_SYS_SERIAL) &&
(idtype != DEV_ID_TYPE_WWID_NAA) &&
(idtype != DEV_ID_TYPE_WWID_EUI) &&
(idtype != DEV_ID_TYPE_WWID_T10)) {
device id: change space handling in t10 wwid t10 wwids are now edited in the same way that multipath does, which is replacing a series of spaces with one _. Previously lvm replaced every space with one _. Devices file entries with the old form will be converted to the new shorter form.
2022-08-31 23:59:28 +03:00
for (i = 0; i < strlen(sysbuf); i++) {
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if ((sysbuf[i] == '"') ||
isblank(sysbuf[i]) ||
isspace(sysbuf[i]) ||
iscntrl(sysbuf[i]))
device id: change space handling in t10 wwid t10 wwids are now edited in the same way that multipath does, which is replacing a series of spaces with one _. Previously lvm replaced every space with one _. Devices file entries with the old form will be converted to the new shorter form.
2022-08-31 23:59:28 +03:00
sysbuf[i] = '_';
}
device_id: handle wwid with spaces or control characters non-standard wwid can be reported from sysfs with spaces/etc. replace with "_"
2021-12-02 22:30:36 +03:00
}
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
/*
* Reduce actual leading and trailing underscores for sys_wwid
* and sys_serial, since underscores were previously used as
* replacements for leading/trailing spaces which are now ignored.
* Also reduce any actual repeated underscores in t10 wwid since
* multiple repeated spaces were also once replaced by underscores.
*/
if ((idtype == DEV_ID_TYPE_SYS_WWID) ||
(idtype == DEV_ID_TYPE_SYS_SERIAL)) {
memcpy(sysbuf2, sysbuf, sizeof(sysbuf2));
_remove_leading_underscores(sysbuf2, sizeof(sysbuf2));
_remove_trailing_underscores(sysbuf2, sizeof(sysbuf2));
if (idtype == DEV_ID_TYPE_SYS_WWID && !strncmp(sysbuf2, "t10", 3) && strstr(sysbuf2, "__"))
_reduce_repeating_underscores(sysbuf2, sizeof(sysbuf2));
if (memcmp(sysbuf, sysbuf2, sizeof(sysbuf)))
log_debug("device_id_system_read reduced underscores %s to %s", sysbuf, sysbuf2);
memcpy(sysbuf, sysbuf2, sizeof(sysbuf));
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!sysbuf[0])
device_id: remove debug trace for common case where a device id type is not used.
2022-10-25 00:19:05 +03:00
goto bad;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!(idname = strdup(sysbuf)))
goto_bad;
return idname;
bad:
return NULL;
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
static int device_id_system_read_preferred(struct cmd_context *cmd, struct device *dev,
uint16_t *new_idtype, const char **new_idname)
{
const char *idname = NULL;
uint16_t idtype;
if (MAJOR(dev->dev) == cmd->dev_types->device_mapper_major) {
if (dev_has_mpath_uuid(cmd, dev, &idname)) {
idtype = DEV_ID_TYPE_MPATH_UUID;
goto id_done;
}
if (_dev_has_crypt_uuid(cmd, dev, &idname)) {
idtype = DEV_ID_TYPE_CRYPT_UUID;
goto id_done;
}
if (_dev_has_lvmlv_uuid(cmd, dev, &idname)) {
idtype = DEV_ID_TYPE_LVMLV_UUID;
goto id_done;
}
}
/* TODO: kpartx partitions on loop devs. */
if (MAJOR(dev->dev) == cmd->dev_types->loop_major) {
idtype = DEV_ID_TYPE_LOOP_FILE;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
goto id_last;
}
if (MAJOR(dev->dev) == cmd->dev_types->md_major) {
idtype = DEV_ID_TYPE_MD_UUID;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
goto id_last;
}
if (MAJOR(dev->dev) == cmd->dev_types->drbd_major) {
/* TODO */
goto id_last;
}
idtype = DEV_ID_TYPE_SYS_WWID;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
idtype = DEV_ID_TYPE_WWID_NAA;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
idtype = DEV_ID_TYPE_WWID_EUI;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
idtype = DEV_ID_TYPE_WWID_T10;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
idtype = DEV_ID_TYPE_SYS_SERIAL;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
id_last:
idtype = DEV_ID_TYPE_DEVNAME;
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
return 0;
id_done:
*new_idtype = idtype;
*new_idname = idname;
return 1;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Check if this dev would use a stable idtype or if it
* would use DEV_ID_TYPE_DEVNAME.
*/
static int _dev_has_stable_id(struct cmd_context *cmd, struct device *dev)
{
char sysbuf[PATH_MAX] = { 0 };
struct dev_id *id;
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
const char *idname;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
/*
* An idtype other than DEVNAME is stable, i.e. it doesn't change after
* reboot or device reattach.
* An id on dev->ids with idtype set and !idname means that idtype does
* not exist for the dev. (Optimization to avoid repeated negative
* system_read.)
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dm_list_iterate_items(id, &dev->ids) {
device_id: accept wwids containing QEMU HARDDISK A wwid may be useful even when it contains the string "QEMU HARDDISK", so allow these to be used.
2023-10-16 23:11:29 +03:00
/*
* An unfortunate special case to work around a previous lvm version
* where wwid's containing "QEMU HARDDISK" were ignored, which would
* generally cause the device to have IDTYPE=devname. On reboot,
* when the dev name changes, the search for a new device may use
* the search_for_devnames="auto" setting which uses this function
* to decide if a dev should be checked as the renamed device or not.
* It's not if it has a wwid, since the renamed dev we're looking for
* would be using sys_wwid if it had a wwid. Now that QEMU wwids
* are used, we still have to check devs with a QEMU wwid to see if
* it's the renamed dev.
*/
if (((id->idtype == DEV_ID_TYPE_SYS_WWID) || (id->idtype == DEV_ID_TYPE_WWID_T10)) &&
id->idname && strstr(id->idname, "QEMU"))
continue;
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
if ((id->idtype != DEV_ID_TYPE_DEVNAME) && id->idname)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
}
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
/*
* Use device_id_system_read() instead of read_sys_block() when
* system_read ignores some values from sysfs.
*/
if ((idname = device_id_system_read(cmd, dev, DEV_ID_TYPE_SYS_WWID))) {
device_id: accept wwids containing QEMU HARDDISK A wwid may be useful even when it contains the string "QEMU HARDDISK", so allow these to be used.
2023-10-16 23:11:29 +03:00
/* see comment above */
if (!strstr(idname, "QEMU")) {
free((void*)idname);
return 1;
}
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
free((void*)idname);
device_id: accept wwids containing QEMU HARDDISK A wwid may be useful even when it contains the string "QEMU HARDDISK", so allow these to be used.
2023-10-16 23:11:29 +03:00
return 0;
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
if ((idname = device_id_system_read(cmd, dev, DEV_ID_TYPE_SYS_SERIAL))) {
free((void*)idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
if ((MAJOR(dev->dev) == cmd->dev_types->loop_major) &&
(idname = device_id_system_read(cmd, dev, DEV_ID_TYPE_LOOP_FILE))) {
free((void*)idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if ((MAJOR(dev->dev) == cmd->dev_types->device_mapper_major)) {
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
if (!read_sys_block(cmd, dev, "dm/uuid", sysbuf, sizeof(sysbuf)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
goto_out;
if (_dm_uuid_has_prefix(sysbuf, "mpath-"))
return 1;
if (_dm_uuid_has_prefix(sysbuf, "CRYPT-"))
return 1;
if (_dm_uuid_has_prefix(sysbuf, "LVM-"))
return 1;
}
if ((MAJOR(dev->dev) == cmd->dev_types->md_major) &&
devices: rework libudev usage related to config settings: obtain_device_info_from_udev (controls if lvm gets a list of devices from readdir /dev or from libudev) external_device_info_source (controls if lvm asks libudev for device information) . Make the obtain_device_list_from_udev setting affect only the choice of readdir /dev vs libudev. The setting no longer controls if udev is used for device type checks. . Change obtain_device_list_from_udev default to 0. This helps avoid boot timeouts due to slow libudev queries, avoids reported failures from udev_enumerate_scan_devices, and avoids delays from "device not initialized in udev database" errors. Even without errors, for a system booting with 1024 PVs, lvm2-pvscan times improve from about 100 sec to 15 sec, and the pvscan command from about 64 sec to about 4 sec. . For external_device_info_source="none", remove all libudev device info queries, and use only lvm native device info. . For external_device_info_source="udev", first check lvm native device info, then check libudev info. . Remove sleep/retry loop when attempting libudev queries for device info. udev info will simply be skipped if it's not immediately available. . Only set up a libdev connection if it will be used by obtain_device_list_from_udev/external_device_info_source. . For native multipath component detection, use /etc/multipath/wwids. If a device has a wwid matching an entry in the wwids file, then it's considered a multipath component. This is necessary to natively detect multipath components when the mpath device is not set up.
2021-06-09 01:12:09 +03:00
read_sys_block(cmd, dev, "md/uuid", sysbuf, sizeof(sysbuf)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
if (!(dev->flags & DEV_ADDED_VPD_WWIDS))
dev_read_vpd_wwids(cmd, dev);
if (!dm_list_empty(&dev->wwids))
return 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
out:
/* DEV_ID_TYPE_DEVNAME would be used for this dev. */
return 0;
}
const char *idtype_to_str(uint16_t idtype)
{
if (idtype == DEV_ID_TYPE_SYS_WWID)
return "sys_wwid";
if (idtype == DEV_ID_TYPE_SYS_SERIAL)
return "sys_serial";
if (idtype == DEV_ID_TYPE_DEVNAME)
return "devname";
if (idtype == DEV_ID_TYPE_MPATH_UUID)
return "mpath_uuid";
if (idtype == DEV_ID_TYPE_CRYPT_UUID)
return "crypt_uuid";
if (idtype == DEV_ID_TYPE_LVMLV_UUID)
return "lvmlv_uuid";
if (idtype == DEV_ID_TYPE_MD_UUID)
return "md_uuid";
if (idtype == DEV_ID_TYPE_LOOP_FILE)
return "loop_file";
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
if (idtype == DEV_ID_TYPE_WWID_NAA)
return "wwid_naa";
if (idtype == DEV_ID_TYPE_WWID_EUI)
return "wwid_eui";
if (idtype == DEV_ID_TYPE_WWID_T10)
return "wwid_t10";
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return "unknown";
}
uint16_t idtype_from_str(const char *str)
{
if (!strcmp(str, "sys_wwid"))
return DEV_ID_TYPE_SYS_WWID;
if (!strcmp(str, "sys_serial"))
return DEV_ID_TYPE_SYS_SERIAL;
if (!strcmp(str, "devname"))
return DEV_ID_TYPE_DEVNAME;
if (!strcmp(str, "mpath_uuid"))
return DEV_ID_TYPE_MPATH_UUID;
if (!strcmp(str, "crypt_uuid"))
return DEV_ID_TYPE_CRYPT_UUID;
if (!strcmp(str, "lvmlv_uuid"))
return DEV_ID_TYPE_LVMLV_UUID;
if (!strcmp(str, "md_uuid"))
return DEV_ID_TYPE_MD_UUID;
if (!strcmp(str, "loop_file"))
return DEV_ID_TYPE_LOOP_FILE;
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
if (!strcmp(str, "wwid_naa"))
return DEV_ID_TYPE_WWID_NAA;
if (!strcmp(str, "wwid_eui"))
return DEV_ID_TYPE_WWID_EUI;
if (!strcmp(str, "wwid_t10"))
return DEV_ID_TYPE_WWID_T10;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
}
const char *dev_idtype_for_metadata(struct cmd_context *cmd, struct device *dev)
{
const char *str;
if (!cmd->enable_devices_file)
return NULL;
if (!dev || !dev->id || !dev->id->idtype || (dev->id->idtype == DEV_ID_TYPE_DEVNAME))
return NULL;
str = idtype_to_str(dev->id->idtype);
if (!strcmp(str, "unknown"))
return NULL;
return str;
}
const char *dev_idname_for_metadata(struct cmd_context *cmd, struct device *dev)
{
if (!cmd->enable_devices_file)
return NULL;
if (!dev || !dev->id || !dev->id->idtype || (dev->id->idtype == DEV_ID_TYPE_DEVNAME))
return NULL;
return dev->id->idname;
}
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
static const char *_dev_idname(struct device *dev, uint16_t idtype)
{
struct dev_id *id;
dm_list_iterate_items(id, &dev->ids) {
if (id->idtype != idtype)
continue;
if (!id->idname)
continue;
return id->idname;
}
return NULL;
}
static int _dev_has_id(struct device *dev, uint16_t idtype, const char *idname)
{
struct dev_id *id;
dm_list_iterate_items(id, &dev->ids) {
if (id->idtype != idtype)
continue;
if (!id->idname)
continue;
if (!strcmp(idname, id->idname))
return 1;
}
return 0;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
static void _copy_idline_str(char *src, char *dst, int len)
{
char *s, *d = dst;
memset(dst, 0, len);
if (!(s = strchr(src, '=')))
return;
s++;
while ((*s == ' ') && (s < src + len))
s++;
while ((*s != ' ') && (*s != '\0') && (*s != '\n') && (s < src + len)) {
*d = *s;
s++;
d++;
}
dst[len-1] = '\0';
}
int device_ids_read(struct cmd_context *cmd)
{
char line[PATH_MAX];
char buf[PATH_MAX];
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
char check_id[PATH_MAX];
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
char *idtype, *idname, *devname, *pvid, *part;
struct dev_use *du;
FILE *fp;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
uint32_t comment_hash = 0;
uint32_t hash = INITIAL_CRC;
int ignore_hash = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
int line_error;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
int product_uuid_found = 0;
int hostname_found = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
int ret = 1;
if (!cmd->enable_devices_file)
return 1;
/*
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
* Note: lvmdevices calls device_ids_read() a second
* time to get the original entries to compare with
* updated entries. Prior to calling it again, it
* moves the cmd->use_devices entries out of the way.
* Otherwise, device_ids_read() should only be called
* once at the start of a command.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
if (!dm_list_empty(&cmd->use_devices)) {
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
/* shouldn't happen */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
log_debug("device_ids_read already done");
return 1;
}
log_debug("device_ids_read %s", cmd->devices_file_path);
if (!(fp = fopen(cmd->devices_file_path, "r"))) {
log_warn("Cannot open devices file to read.");
return 0;
}
while (fgets(line, sizeof(line), fp)) {
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
/* Special value for testing */
if (!strncmp(line, "# HASH=0", 8)) {
ignore_hash = 1;
continue;
}
if (!strncmp(line, "# HASH", 6)) {
_copy_idline_str(line, buf, sizeof(buf));
errno = 0;
comment_hash = (uint32_t)strtoul(buf, NULL, 10);
if (errno) {
log_debug("Devices file invalid hash value errno %d", errno);
comment_hash = 0;
}
continue;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (line[0] == '#')
continue;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
/* Old version wrote this but it's not used. */
if (!strncmp(line, "SYSTEMID", 8))
continue;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
hash = calc_crc(hash, (uint8_t *)line, strlen(line));
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (!strncmp(line, "HOSTNAME", 8)) {
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
_copy_idline_str(line, check_id, sizeof(check_id));
log_debug("read devices file hostname %s", check_id);
/* Save original for lvmdevices output. */
if (!strcmp(cmd->name, "lvmdevices"))
cov: ensure string ends with \0 Use dm_strncpy() that ensures \0 termination.
2024-03-25 02:53:02 +03:00
(void)dm_strncpy(devices_file_hostname_orig, check_id, PATH_MAX);
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (!cmd->device_ids_check_hostname)
continue;
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
hostname_found = 1;
if (cmd->hostname && strcmp(cmd->hostname, check_id)) {
log_debug("Devices file hostname %s vs local %s.",
check_id[0] ? check_id : "none", cmd->hostname ?: "none");
cmd->device_ids_refresh_trigger = 1;
}
continue;
}
if (!strncmp(line, "PRODUCT_UUID", 12)) {
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
_copy_idline_str(line, check_id, sizeof(check_id));
log_debug("read devices file product_uuid %s", check_id);
/* Save original for lvmdevices output. */
if (!strcmp(cmd->name, "lvmdevices"))
cov: ensure string ends with \0 Use dm_strncpy() that ensures \0 termination.
2024-03-25 02:53:02 +03:00
(void)dm_strncpy(devices_file_product_uuid_orig, check_id, PATH_MAX);
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (!cmd->device_ids_check_product_uuid)
continue;
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
product_uuid_found = 1;
if ((!cmd->product_uuid && check_id[0]) ||
(cmd->product_uuid && strcmp(cmd->product_uuid, check_id))) {
log_debug("Devices file product_uuid %s vs local %s.",
check_id[0] ? check_id : "none", cmd->product_uuid ?: "none");
cmd->device_ids_refresh_trigger = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
continue;
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!strncmp(line, "VERSION", 7)) {
_copy_idline_str(line, _devices_file_version, sizeof(_devices_file_version));
log_debug("read devices file version %s", _devices_file_version);
continue;
}
idtype = strstr(line, "IDTYPE");
idname = strstr(line, "IDNAME");
devname = strstr(line, "DEVNAME");
pvid = strstr(line, "PVID");
part = strstr(line, "PART");
line_error = 0;
/* These two are the minimum required. */
if (!idtype || !idname)
continue;
if (!(du = zalloc(sizeof(struct dev_use)))) {
log_warn("WARNING: failed to process devices file entry.");
continue;
}
_copy_idline_str(idtype, buf, PATH_MAX);
if (buf[0])
du->idtype = idtype_from_str(buf);
_copy_idline_str(idname, buf, PATH_MAX);
if (buf[0] && (buf[0] != '.')) {
if (!(du->idname = strdup(buf)))
line_error = 1;
}
if (devname) {
_copy_idline_str(devname, buf, PATH_MAX);
if (buf[0] && (buf[0] != '.')) {
if (!(du->devname = strdup(buf)))
line_error = 1;
}
}
if (pvid) {
_copy_idline_str(pvid, buf, PATH_MAX);
if (buf[0] && (buf[0] != '.')) {
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
/*
* Caution: pvids are usually stored as
* char pvid[ID_LEN+1], and use memcmp/memcpy
* with ID_LEN. So, strdup_pvid is used to
* ensure the buffer for du->pvid is ID_LEN+1.
* Then, memcmp/memcpy with ID_LEN will work,
* and printing du->pvid with %s will work.
*/
if (!(du->pvid = strdup_pvid(buf)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
line_error = 1;
}
}
if (part) {
_copy_idline_str(part, buf, PATH_MAX);
if (buf[0] && (buf[0] != '.'))
du->part = atoi(buf);
}
if (line_error) {
log_warn("WARNING: failed to process devices file entry.");
free_du(du);
continue;
}
dm_list_add(&cmd->use_devices, &du->list);
}
if (fclose(fp))
stack;
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
log_debug("Devices file comment hash %u calc hash %u", comment_hash, hash);
if (ignore_hash)
cmd->devices_file_hash_ignore = 1;
else if (hash != comment_hash)
cmd->devices_file_hash_mismatch = 1;
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
if (!product_uuid_found && cmd->device_ids_check_product_uuid) {
cmd->device_ids_refresh_trigger = 1;
log_debug("Devices file refresh: missing product_uuid");
} else if ((!product_uuid_found && !hostname_found) &&
(cmd->device_ids_check_product_uuid || cmd->device_ids_check_hostname)) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
cmd->device_ids_refresh_trigger = 1;
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
log_debug("Devices file refresh: missing product_uuid and hostname");
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return ret;
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
#define BACKUP_NAME_LEN 35
#define BACKUP_NAME_SIZE BACKUP_NAME_LEN+1 /* +1 null byte */
static int _filter_backup_files(const struct dirent *de)
{
if (strlen(de->d_name) != BACKUP_NAME_LEN)
return 0;
if (strncmp(de->d_name, "system.devices-", 15))
return 0;
return 1;
}
static void devices_file_backup(struct cmd_context *cmd, char *fc, char *fb, time_t *tp, uint32_t df_counter)
{
struct dirent *de;
struct dirent **namelist;
DIR *dir;
FILE *fp;
struct tm *tm;
char dirpath[PATH_MAX];
char path[PATH_MAX];
char datetime_str[48];
char de_date_str[16];
char de_time_str[16];
char de_count_str[16];
char low_name[BACKUP_NAME_SIZE];
uint32_t low_date, low_time, low_count;
uint32_t de_date, de_time, de_count;
unsigned int backup_limit, backup_count, remove_count;
int sort_count;
int dir_fd;
int i;
/* Skip backup with --devicesfile <name>, only back up default system.devices. */
if (cmd->devicesfile)
return;
if (!(backup_limit = (unsigned int)find_config_tree_int(cmd, devices_devicesfile_backup_limit_CFG, NULL)))
return;
if (dm_snprintf(dirpath, sizeof(dirpath), "%s/devices/backup/", cmd->system_dir) < 0)
return;
if (!dm_create_dir(dirpath))
return;
cov: fix incorrect error check Check for NULL pointer. Fix missing release on error path. Also dir_fd might be just != -1.
2024-03-25 02:49:51 +03:00
if (!(dir = opendir(dirpath)))
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
return;
tm = localtime(tp);
strftime(datetime_str, sizeof(datetime_str), "%Y%m%d.%H%M%S", tm);
/* system.devices-YYYYMMDD.HHMMSS.000N (fixed length 35) */
if (dm_snprintf(path, sizeof(path), "%s/devices/backup/system.devices-%s.%04u",
cmd->system_dir, datetime_str, df_counter) < 0)
cov: fix incorrect error check Check for NULL pointer. Fix missing release on error path. Also dir_fd might be just != -1.
2024-03-25 02:49:51 +03:00
goto_out;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (!(fp = fopen(path, "w+"))) {
log_error("Failed to create backup file %s", path);
cov: fix incorrect error check Check for NULL pointer. Fix missing release on error path. Also dir_fd might be just != -1.
2024-03-25 02:49:51 +03:00
goto out;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
}
if (fputs(fc, fp) < 0) {
log_error("Failed to write backup file %s", path);
fclose(fp);
goto out;
}
if (fputs(fb, fp) < 0) {
log_error("Failed to write backup file %s", path);
fclose(fp);
goto out;
}
if (fflush(fp) < 0) {
log_error("Failed to write backup file %s", path);
fclose(fp);
goto out;
}
if (fsync(fileno(fp)) < 0) {
log_error("Failed to sync backup file %s", path);
fclose(fp);
goto out;
}
if (fclose(fp))
stack;
log_debug("Wrote backup %s", path);
/* Possibly remove old backup files per configurable limit on backup files. */
backup_count = 0;
low_date = 0;
low_time = 0;
low_count = 0;
memset(low_name, 0, sizeof(low_name)); /* oldest backup file name */
while ((de = readdir(dir))) {
if (de->d_name[0] == '.')
continue;
if (strlen(de->d_name) != BACKUP_NAME_LEN)
continue;
memset(de_date_str, 0, sizeof(de_date_str));
memset(de_time_str, 0, sizeof(de_time_str));
memset(de_count_str, 0, sizeof(de_count_str));
/*
* Save the oldest backup file name.
* system.devices-YYYYMMDD.HHMMSS.NNNN
* 12345678901234567890123456789012345 (len 35)
* date YYYYMMDD is 8 chars 16-23
* time HHMMSS is 6 chars 25-30
* count NNNN is 4 chars 32-35
*/
memcpy(de_date_str, de->d_name+15, 8);
memcpy(de_time_str, de->d_name+24, 6);
memcpy(de_count_str, de->d_name+31, 4);
de_date = (uint32_t)strtoul(de_date_str, NULL, 10);
de_time = (uint32_t)strtoul(de_time_str, NULL, 10);
de_count = (uint32_t)strtoul(de_count_str, NULL, 10);
if (!low_date ||
(de_date < low_date) ||
(de_date == low_date && de_time < low_time) ||
(de_date == low_date && de_time == low_time && de_count < low_count)) {
cov: ensure string ends with \0 Use dm_strncpy() that ensures \0 termination.
2024-03-25 02:53:02 +03:00
(void)dm_strncpy(low_name, de->d_name, sizeof(low_name));
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
low_date = de_date;
low_time = de_time;
low_count = de_count;
}
backup_count++;
}
if (backup_count <= backup_limit)
goto out;
remove_count = backup_count - backup_limit;
dir_fd = dirfd(dir);
/* The common case removes the oldest file and can avoid sorting. */
if (remove_count == 1 && low_name[0]) {
log_debug("Remove backup %s", low_name);
unlinkat(dir_fd, low_name, 0);
goto out;
}
/* Remove the n oldest files by sorting system.devices-*. */
setlocale(LC_COLLATE, "C"); /* Avoid sorting by locales */
sort_count = scandir(dirpath, &namelist, _filter_backup_files, alphasort);
setlocale(LC_COLLATE, "");
if (sort_count < 0) {
log_error("Failed to sort backup devices files.");
goto out;
}
log_debug("Limit backup %u found %u sorted %d removing %u.",
backup_limit, backup_count, sort_count, remove_count);
for (i = 0; i < sort_count; i++) {
if (remove_count) {
log_debug("Remove backup %s", namelist[i]->d_name);
unlinkat(dir_fd, namelist[i]->d_name, 0);
remove_count--;
}
free(namelist[i]);
}
free(namelist);
out:
closedir(dir);
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
int device_ids_write(struct cmd_context *cmd)
{
char dirpath[PATH_MAX];
gcc: declaration of tmpfile shadows a global Rename tmpfile to tmppath to avoid declaration shadowing of: /usr/include/stdio.h:174: warning: shadowed declaration is here
2021-03-22 01:32:12 +03:00
char tmppath[PATH_MAX];
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
char version_buf[VERSION_LINE_MAX] = {0};
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
char fc[1024]; /* devices file comments (buf of commented lines) */
char *fb = NULL; /* devices file contents (buf of uncommented lines) */
FILE *fp = NULL;
int dir_fd = -1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
time_t t;
struct dev_use *du;
const char *devname;
const char *pvid;
uint32_t df_major = 0, df_minor = 0, df_counter = 0;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
uint32_t hash = 0;
int names_len = 0;
int len, num, pos;
int fb_size, fb_bytes, fc_bytes;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
int file_exists;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
int ret = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!cmd->enable_devices_file && !cmd->pending_devices_file)
return 1;
/*
* pending_devices_file: setup_devices found no system devices file
* exists and has not enabled the devices file, but may want to
* create a new devices file here and enable it.
*
* If this is pvcreate/vgcreate with the system devices file,
* and the devices file doesn't exist, then we may not want to
* create one for the new PVs created. This is because doing so
* would cause existing PVs on the system to be left out and not
* be visible. So, if the pvcreate/vgcreate have seen existing PVs
* during the label scan, then skip creating/writing a new system
* devices file. But, if they have not seen any other PVs, then
* create a new system devices file here with the newly created PVs.
* The idea is that pvcreate/vgcreate of the first PVs is probably
* system installation, and we'd like to have a devices file created
* automatically during installation. (The installer could also touch
* the devices file to create it, and that would cause
* pvcreate/vgcreate to always populate it.)
*/
file_exists = devices_file_exists(cmd);
log_debug("device_ids_write create %d edit %d pending %d exists %d version %s devicesfile %s",
cmd->create_edit_devices_file, cmd->edit_devices_file, cmd->pending_devices_file, file_exists,
_devices_file_version[0] ? _devices_file_version : ".", cmd->devicesfile ?: ".");
if (cmd->pending_devices_file && cmd->create_edit_devices_file && !cmd->devicesfile && !file_exists &&
(!strncmp(cmd->name, "pvcreate", 8) || !strncmp(cmd->name, "vgcreate", 8))) {
/* If any PVs were seen during scan then don't create a new devices file. */
if (lvmcache_vg_info_count()) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_print_unless_silent("Not creating system devices file due to existing VGs.");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
free_dus(&cmd->use_devices);
return 1;
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_print_unless_silent("Creating devices file %s", cmd->devices_file_path);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
cmd->enable_devices_file = 1;
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
/* Total length of all devnames and idnames, used to estimate file size. */
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->devname)
names_len += strlen(du->devname);
if (du->idname)
names_len += strlen(du->idname);
}
devices file: don't write in test mode
2021-12-01 19:08:08 +03:00
if (test_mode())
return 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (_devices_file_version[0]) {
if (sscanf(_devices_file_version, "%u.%u.%u", &df_major, &df_minor, &df_counter) != 3) {
/* don't update a file we can't parse */
log_warn("WARNING: not updating devices file with unparsed version.");
return 0;
}
if (df_major > DEVICES_FILE_MAJOR) {
/* don't update a file with a newer major version */
log_warn("WARNING: not updating devices file with larger major version.");
return 0;
}
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (dm_snprintf(dirpath, sizeof(dirpath), "%s/devices", cmd->system_dir) < 0)
goto_out;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (dm_snprintf(tmppath, sizeof(tmppath), "%s_new", cmd->devices_file_path) < 0)
goto_out;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
cov: explicitely ignore return value
2021-04-22 17:49:34 +03:00
(void) unlink(tmppath); /* in case a previous file was left */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
gcc: declaration of tmpfile shadows a global Rename tmpfile to tmppath to avoid declaration shadowing of: /usr/include/stdio.h:174: warning: shadowed declaration is here
2021-03-22 01:32:12 +03:00
if (!(fp = fopen(tmppath, "w+"))) {
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
log_warn("Cannot open to write %s.", tmppath);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
goto out;
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if ((dir_fd = open(dirpath, O_RDONLY)) < 0)
goto_out;
/*
* Estimate the size of the new system.devices:
* names_len is the length of all devnames and idnames,
* 256 bytes for PRODUCT_UUID/HOSTNAME and VERSION lines,
* 128 bytes per device entry for other fields.
*/
fb_size = names_len + 256 + (128 * dm_list_size(&cmd->use_devices));
if (!(fb = malloc(fb_size))) {
log_error("Failed to allocate buffer size %d for devices file.", fb_size);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
goto out;
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
len = fb_size;
pos = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
/* if product_uuid is included, then hostname is unnecessary */
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (cmd->product_uuid && cmd->device_ids_check_product_uuid)
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
num = snprintf(fb + pos, len - pos, "PRODUCT_UUID=%s\n", cmd->product_uuid);
lvmdevices: print changes for product_uuid or hostname used by the recently added refresh feature
2023-11-07 23:30:48 +03:00
else if (cmd->hostname && cmd->device_ids_check_hostname)
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
num = snprintf(fb + pos, len - pos, "HOSTNAME=%s\n", cmd->hostname);
if (num >= len - pos) {
log_error("Failed to write buffer for devices file content.");
goto out;
}
pos += num;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (dm_snprintf(version_buf, VERSION_LINE_MAX, "VERSION=%u.%u.%u", DEVICES_FILE_MAJOR, DEVICES_FILE_MINOR, df_counter+1) < 0)
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
goto_out;
num = snprintf(fb + pos, len - pos, "%s\n", version_buf);
if (num >= len - pos) {
log_error("Failed to write buffer for devices file content.");
goto out;
}
pos += num;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/* as if we had read this version in case we want to write again */
memset(_devices_file_version, 0, sizeof(_devices_file_version));
_copy_idline_str(version_buf, _devices_file_version, sizeof(_devices_file_version));
dm_list_iterate_items(du, &cmd->use_devices) {
devname = du->dev ? dev_name(du->dev) : du->devname;
if (!devname || devname[0] != '/')
devname = ".";
if (!du->pvid || !du->pvid[0] || (du->pvid[0] == '.'))
pvid = ".";
else
pvid = du->pvid;
if (du->part) {
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
num = snprintf(fb + pos, len - pos, "IDTYPE=%s IDNAME=%s DEVNAME=%s PVID=%s PART=%d\n",
idtype_to_str(du->idtype) ?: ".",
du->idname ?: ".", devname, pvid, du->part);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
} else {
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
num = snprintf(fb + pos, len - pos, "IDTYPE=%s IDNAME=%s DEVNAME=%s PVID=%s\n",
idtype_to_str(du->idtype) ?: ".",
du->idname ?: ".", devname, pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (num >= len - pos) {
log_error("Failed to write buffer for devices file content.");
goto out;
}
pos += num;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
fb_bytes = pos;
fb[fb_bytes] = '\0';
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (!cmd->devices_file_hash_ignore)
hash = calc_crc(INITIAL_CRC, (const uint8_t *)fb, fb_bytes);
t = time(NULL);
num = snprintf(fc, sizeof(fc),
"# LVM uses devices listed in this file.\n" \
"# Created by LVM command %s pid %d at %s" \
"# HASH=%u\n",
cmd->name, getpid(), ctime(&t), hash);
if (num >= sizeof(fc)) {
log_error("Failed to write buffer for devices file content.");
goto out;
}
fc_bytes = num;
fc[fc_bytes] = '\0';
if (fputs(fc, fp) < 0) {
log_error("Failed to write devices file header.");
goto out;
}
if (fputs(fb, fp) < 0) {
log_error("Failed to write devices file.");
goto out;
}
if (fflush(fp) < 0)
goto_out;
if (fsync(fileno(fp)) < 0)
goto_out;
if (fclose(fp) < 0)
goto_out;
fp = NULL;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
gcc: declaration of tmpfile shadows a global Rename tmpfile to tmppath to avoid declaration shadowing of: /usr/include/stdio.h:174: warning: shadowed declaration is here
2021-03-22 01:32:12 +03:00
if (rename(tmppath, cmd->devices_file_path) < 0) {
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
log_error("Failed to replace devices file.");
goto out;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
if (fsync(dir_fd) < 0)
stack;
if (close(dir_fd) < 0)
stack;
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
dir_fd = -1;
ret = 1;
log_debug("Wrote devices file %s hash %u hashed size %u total size %u",
version_buf, hash, fb_bytes, fb_bytes + fc_bytes);
devices_file_backup(cmd, fc, fb, &t, df_counter+1);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
out:
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (fb)
free(fb);
if (fp)
fclose(fp);
cov: fix incorrect error check Check for NULL pointer. Fix missing release on error path. Also dir_fd might be just != -1.
2024-03-25 02:49:51 +03:00
if (dir_fd != -1)
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
close(dir_fd);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return ret;
}
static void _device_ids_update_try(struct cmd_context *cmd)
{
cov: variable initialization
2021-03-09 18:05:46 +03:00
int held = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
rename pvscan_cache_single to expect_missing_vg_device in cmd
2021-11-03 17:50:11 +03:00
if (cmd->expect_missing_vg_device) {
cleanup: correcting some log_print Correcting to log_print_unless_silent(), so -qq can do some work.
2023-04-26 15:40:11 +03:00
log_print_unless_silent("Devices file update skipped.");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return;
}
/*
* Use a non-blocking lock since it's not essential to
* make this update, the next cmd will make these changes
* if we skip it this update.
* If this command already holds an ex lock on the
* devices file, lock_devices_file ex succeeds and
* held is set.
* If we get the lock, only update the devices file if
* it's not been changed since we read it.
*/
if (!lock_devices_file_try(cmd, LOCK_EX, &held)) {
log_debug("Skip devices file update (busy).");
} else {
debug: more tracing Check result of device_ids_write() and at least provide stack;
2021-03-10 03:26:30 +03:00
if (device_ids_version_unchanged(cmd)) {
if (!device_ids_write(cmd))
stack;
} else
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
log_debug("Skip devices file update (changed).");
}
if (!held)
unlock_devices_file(cmd);
}
int device_ids_version_unchanged(struct cmd_context *cmd)
{
char line[PATH_MAX];
char version_buf[VERSION_LINE_MAX];
FILE *fp;
if (!(fp = fopen(cmd->devices_file_path, "r"))) {
log_warn("WARNING: cannot open devices file to read.");
return 0;
}
while (fgets(line, sizeof(line), fp)) {
if (line[0] == '#')
continue;
if (!strncmp(line, "VERSION", 7)) {
if (fclose(fp))
stack;
_copy_idline_str(line, version_buf, sizeof(version_buf));
log_debug("check devices file version %s prev %s", version_buf, _devices_file_version);
if (!strcmp(version_buf, _devices_file_version))
return 1;
return 0;
}
}
if (fclose(fp))
stack;
return 0;
}
int device_ids_use_devname(struct cmd_context *cmd)
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idtype == DEV_ID_TYPE_DEVNAME)
return 1;
}
return 0;
}
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
static int _device_ids_use_lvmlv(struct cmd_context *cmd)
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idtype == DEV_ID_TYPE_LVMLV_UUID)
return 1;
}
return 0;
}
devices file: warn about missing multipath entry Warn if a scsi device is listed in the devices file that is used by a multipath device that is not listed. This will happen if a scsi device is listed in the devices file and then an mpath device is set up to use it. The way to correct this would be to remove the devices file entry for the component device and add a new entry for the multipath device.
2022-03-30 01:18:45 +03:00
struct dev_use *get_du_for_devno(struct cmd_context *cmd, dev_t devno)
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->dev && du->dev->dev == devno)
return du;
}
return NULL;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
struct dev_use *get_du_for_dev(struct cmd_context *cmd, struct device *dev)
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->dev == dev)
return du;
}
return NULL;
}
struct dev_use *get_du_for_pvid(struct cmd_context *cmd, const char *pvid)
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (!du->pvid)
continue;
cov: clean up pvid and vgid usage pvid and vgid are sometimes a null-terminated string, and other times a 'struct id', and the two types were often cast between each other. When a struct id was cast to a char pointer, the resulting string would not necessarily be null terminated. Casting a null-terminated string id to a struct id is fine, but is still avoided when possible. A struct id is: int8_t uuid[ID_LEN] A string id is: char pvid[ID_LEN + 1] A convention is introduced to help distinguish them: - variables and struct fields named "pvid" or "vgid" should be null-terminated strings. - variables and struct fields named "pv_id" or "vg_id" should be struct id's. - examples: char pvid[ID_LEN + 1]; char vgid[ID_LEN + 1]; struct id pv_id; struct id vg_id; Function names also attempt to follow this convention. Avoid casting between the two types as much as possible, with limited exceptions when known to be safe and clearly commented. Avoid using variations of strcpy and strcmp, and instead use memcpy/memcmp with ID_LEN (with similar limited exceptions possible.)
2021-08-03 23:32:33 +03:00
if (!memcmp(du->pvid, pvid, ID_LEN))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return du;
}
return NULL;
}
lvmdevices: make deldev work for missing device
2022-02-04 01:56:03 +03:00
struct dev_use *get_du_for_devname(struct cmd_context *cmd, const char *devname)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (!du->devname)
continue;
if (!strcmp(du->devname, devname))
return du;
}
return NULL;
}
lvmdevices: --deldev using device id When used with --deviceidtype, --deldev can specify a device id to remove.
2022-04-06 20:29:26 +03:00
struct dev_use *get_du_for_device_id(struct cmd_context *cmd, uint16_t idtype, const char *idname)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idname && (du->idtype == idtype) && !strcmp(du->idname, idname))
return du;
}
return NULL;
}
/*
* Add or update entry for this dev.
* . add an entry to dev->ids and point dev->id to it
* . add or update entry in cmd->use_devices
*/
int device_id_add(struct cmd_context *cmd, struct device *dev, const char *pvid_arg,
lvmdevices: use deviceidtype option strictly Only use the device id type specified by --deviceidtype, and fail if that type is not available for the device.
2022-09-15 17:45:21 +03:00
const char *idtype_arg, const char *id_arg, int use_idtype_only)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
char pvid[ID_LEN+1] = { 0 };
uint16_t idtype = 0;
const char *idname = NULL;
const char *check_idname = NULL;
const char *update_matching_kind = NULL;
const char *update_matching_name = NULL;
struct dev_use *du, *update_du = NULL, *du_dev, *du_pvid, *du_devname, *du_devid;
struct dev_id *id;
int found_id = 0;
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
int part = 0;
if (!dev_get_partition_number(dev, &part))
return_0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: fix dev_name assumptions dev_name(dev) returns "[unknown]" if there are no names on dev->aliases. It's meant mainly for log messages. Many places assume a valid path name is returned, and use it directly. A caller that wants to use the path from dev_name() must first check if the dev has any paths with dm_list_empty(&dev->aliases).
2022-02-23 00:03:11 +03:00
/* Ensure valid dev_name(dev) below. */
if (dm_list_empty(&dev->aliases))
return_0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* When enable_devices_file=0 and pending_devices_file=1 we let
* pvcreate/vgcreate add new du's to cmd->use_devices. These du's may
* be written to a new system devices file in device_ids_write, or they
* may not, or devices_file_write may decide not to write a new system
* devices file and devices file may remain disabled.
*/
if (!cmd->enable_devices_file && !cmd->pending_devices_file)
return 1;
/*
* The pvid_arg may be passed from a 'struct id' (pv->id) which
* may not have a terminating \0.
* Make a terminated copy to use as a string.
*/
memcpy(&pvid, pvid_arg, ID_LEN);
/*
* Choose the device_id type for the device being added.
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
* possible breakage:
* . if the kernel changes what it prints from sys/wwid (e.g. from
* the t10 value to the naa value for the dev), this would break
* matching du to dev unless lvm tries to match all of the dev's
* different wwids from vpd_pg83 against sys_wwid entries.
* . adding a new device_id type into the devices file breaks prior
* lvm versions that attempt to use the devices file from the new
* lvm version.
* . using a value for sys_wwid that comes from vpd_pg83 and not
* sys/wwid (e.g. taking a naa wwid from vpd_pg83 when sys/wwid
* is printing the t10 wwid) would break prior lvm versions that
* only match a du against the sys/wwid values.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
lvmdevices: add deviceidtype option When adding a device to the devices file with --adddev, lvm by default chooses the best device ID type for the new device. The new --deviceidtype option allows the user to override the built in preference. This is useful if there's a problem with the default type, or if a secondary type is preferrable. If the specified deviceidtype does not produce a device ID, then lvm falls back to the preference it would otherwise use.
2021-06-08 22:49:34 +03:00
if (idtype_arg) {
lvmdevices: use deviceidtype option strictly Only use the device id type specified by --deviceidtype, and fail if that type is not available for the device.
2022-09-15 17:45:21 +03:00
if (!(idtype = idtype_from_str(idtype_arg))) {
if (use_idtype_only) {
log_error("The specified --deviceidtype %s is unknown.", idtype_arg);
return 0;
}
lvmdevices: add deviceidtype option When adding a device to the devices file with --adddev, lvm by default chooses the best device ID type for the new device. The new --deviceidtype option allows the user to override the built in preference. This is useful if there's a problem with the default type, or if a secondary type is preferrable. If the specified deviceidtype does not produce a device ID, then lvm falls back to the preference it would otherwise use.
2021-06-08 22:49:34 +03:00
log_warn("WARNING: ignoring unknown device_id type %s.", idtype_arg);
lvmdevices: use deviceidtype option strictly Only use the device id type specified by --deviceidtype, and fail if that type is not available for the device.
2022-09-15 17:45:21 +03:00
} else {
lvmdevices: add deviceidtype option When adding a device to the devices file with --adddev, lvm by default chooses the best device ID type for the new device. The new --deviceidtype option allows the user to override the built in preference. This is useful if there's a problem with the default type, or if a secondary type is preferrable. If the specified deviceidtype does not produce a device ID, then lvm falls back to the preference it would otherwise use.
2021-06-08 22:49:34 +03:00
if (id_arg) {
if ((idname = strdup(id_arg)))
goto id_done;
log_warn("WARNING: ignoring device_id name %s.", id_arg);
}
if ((idname = device_id_system_read(cmd, dev, idtype)))
goto id_done;
lvmdevices: use deviceidtype option strictly Only use the device id type specified by --deviceidtype, and fail if that type is not available for the device.
2022-09-15 17:45:21 +03:00
if (use_idtype_only) {
log_error("The specified --deviceidtype %s is not available for %s.", idtype_arg, dev_name(dev));
return 0;
}
lvmdevices: add deviceidtype option When adding a device to the devices file with --adddev, lvm by default chooses the best device ID type for the new device. The new --deviceidtype option allows the user to override the built in preference. This is useful if there's a problem with the default type, or if a secondary type is preferrable. If the specified deviceidtype does not produce a device ID, then lvm falls back to the preference it would otherwise use.
2021-06-08 22:49:34 +03:00
log_warn("WARNING: ignoring deviceidtype %s which is not available for device.", idtype_arg);
idtype = 0;
}
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (!device_id_system_read_preferred(cmd, dev, &idtype, &idname))
return_0;
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
if (!idname)
return_0;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
id_done:
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Create a dev_id struct for the new idtype on dev->ids.
*/
dm_list_iterate_items(id, &dev->ids) {
if (id->idtype == idtype) {
found_id = 1;
break;
}
}
device_id: fix memleak and free idname Remove extra code path used only for 'free()' and free(idname) on all paths that do not add it to list and avoid memleak in few cases.
2021-04-23 01:25:14 +03:00
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
if (found_id && idname && (!id->idname || strcmp(id->idname, idname))) {
log_debug("Replacing device id %s old %s new %s",
idtype_to_str(id->idtype), id->idname ?: ".", idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dm_list_del(&id->list);
free_did(id);
found_id = 0;
}
if (!found_id) {
device_id: fix memleak and free idname Remove extra code path used only for 'free()' and free(idname) on all paths that do not add it to list and avoid memleak in few cases.
2021-04-23 01:25:14 +03:00
if (!(id = zalloc(sizeof(struct dev_id)))) {
free((char *)idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return_0;
device_id: fix memleak and free idname Remove extra code path used only for 'free()' and free(idname) on all paths that do not add it to list and avoid memleak in few cases.
2021-04-23 01:25:14 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
id->idtype = idtype;
id->idname = (char *)idname;
dm_list_add(&dev->ids, &id->list);
device_id: fix memleak and free idname Remove extra code path used only for 'free()' and free(idname) on all paths that do not add it to list and avoid memleak in few cases.
2021-04-23 01:25:14 +03:00
} else
free((char*)idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
idname = NULL;
idtype = 0;
/*
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
* "dev" is the device we are adding.
* "id" is the device_id it's using, set in dev->id.
*
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* Update the cmd->use_devices list for the new device. The
* use_devices list will be used to update the devices file.
*
* The dev being added can potentially overlap existing entries
* in various ways. If one of the existing entries is truely for
* this device being added, then we want to update that entry.
* If some other existing entries are not for the same device, but
* have some overlapping values, then we want to try to update
* those other entries to fix any incorrect info.
*/
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
/* Is there already an entry matched to this device? */
du_dev = get_du_for_dev(cmd, dev);
/* Is there already an entry matched to this device's pvid? */
du_pvid = get_du_for_pvid(cmd, pvid);
/* Is there already an entry using this device's name? */
lvmdevices: make deldev work for missing device
2022-02-04 01:56:03 +03:00
du_devname = get_du_for_devname(cmd, dev_name(dev));
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
/* Is there already an entry using the device_id for this device? */
lvmdevices: --deldev using device id When used with --deviceidtype, --deldev can specify a device id to remove.
2022-04-06 20:29:26 +03:00
du_devid = get_du_for_device_id(cmd, id->idtype, id->idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (du_dev)
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
log_debug("device_id_add %s pvid %s matches entry %p dev %s",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_name(dev), pvid, du_dev, dev_name(du_dev->dev));
if (du_pvid)
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
log_debug("device_id_add %s pvid %s matches entry %p dev %s with same pvid %s",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_name(dev), pvid, du_pvid, du_pvid->dev ? dev_name(du_pvid->dev) : ".",
du_pvid->pvid);
if (du_devid)
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
log_debug("device_id_add %s pvid %s matches entry %p dev %s with same device_id %d %s",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_name(dev), pvid, du_devid, du_devid->dev ? dev_name(du_devid->dev) : ".",
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
du_devid->idtype, du_devid->idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (du_devname)
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
log_debug("device_id_add %s pvid %s matches entry %p dev %s with same devname %s",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_name(dev), pvid, du_devname, du_devname->dev ? dev_name(du_devname->dev) : ".",
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
du_devname->devname);
if (du_pvid && (du_pvid->dev != dev))
devices file: fix pvcreate --uuid matching pvid entry with no device id pvcreate with --uuid would segfault if a devices file entry matched the specified pvid, but the devices file entry had no device_id, which could happen if the entry has a devname idtype.
2022-08-19 21:31:22 +03:00
log_warn("WARNING: adding device %s with PVID %s which is already used for %s device_id %s.",
dev_name(dev), pvid, du_pvid->dev ? dev_name(du_pvid->dev) : "missing device",
du_pvid->idname ?: "none");
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
if (du_devid && (du_devid->dev != dev)) {
if (!du_devid->dev) {
log_warn("WARNING: adding device %s with idname %s which is already used for missing device.",
dev_name(dev), id->idname);
} else {
int ret1, ret2;
dev_t devt1, devt2;
/* Check if both entries are partitions of the same device. */
ret1 = dev_get_primary_dev(cmd->dev_types, dev, &devt1);
ret2 = dev_get_primary_dev(cmd->dev_types, du_devid->dev, &devt2);
if ((ret1 == 2) && (ret2 == 2) && (devt1 == devt2)) {
log_debug("Using separate entries for partitions of same device %s part %d %s part %d.",
dev_name(dev), part, dev_name(du_devid->dev), du_devid->part);
} else {
log_warn("WARNING: adding device %s with idname %s which is already used for %s.",
dev_name(dev), id->idname, dev_name(du_devid->dev));
}
}
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* If one of the existing entries (du_dev, du_pvid, du_devid, du_devname)
* is truely for the same device that is being added, then set update_du to
* that existing entry to be updated.
*/
if (du_dev) {
update_du = du_dev;
dm_list_del(&update_du->list);
update_matching_kind = "device";
update_matching_name = dev_name(dev);
} else if (du_pvid) {
/*
* If the device_id of the existing entry for PVID is the same
* as the device_id of the device being added, then update the
* existing entry. If the device_ids differ, then the devices
* have duplicate PVIDs, and the new device gets a new entry
* (if we allow it to be added.)
*/
if (du_pvid->idtype == id->idtype)
check_idname = strdup(id->idname);
else
check_idname = device_id_system_read(cmd, dev, du_pvid->idtype);
devices file: fix pvcreate --uuid matching pvid entry with no device id pvcreate with --uuid would segfault if a devices file entry matched the specified pvid, but the devices file entry had no device_id, which could happen if the entry has a devname idtype.
2022-08-19 21:31:22 +03:00
if (!du_pvid->idname || (check_idname && !strcmp(check_idname, du_pvid->idname))) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
update_du = du_pvid;
dm_list_del(&update_du->list);
update_matching_kind = "PVID";
update_matching_name = pvid;
} else {
lvmdevices: check yes option for adding duplicate
2021-08-19 00:26:11 +03:00
if (!cmd->current_settings.yes &&
yes_no_prompt("Add device with duplicate PV to devices file?") == 'n') {
cleanup: correcting some log_print Correcting to log_print_unless_silent(), so -qq can do some work.
2023-04-26 15:40:11 +03:00
log_print_unless_silent("Device not added.");
coverity cleanups
2021-06-16 21:22:54 +03:00
free((void *)check_idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
}
}
} else if (du_devid) {
/*
* Do we create a new du or update the existing du?
* If it's the same device, update the existing du,
* but if it's two devices with the same device_id, then
* create a new du.
*
* We know that 'dev' has device_id 'id'.
* Check if du_devid->dev is different from 'dev'
* and that du_devid->idname matches id.
* If so, then there are two different devices with
* the same device_id (create a new du for dev.)
* If not, then update the existing du_devid.
*/
lvmdevices: fix checks when adding entries Removes some incorrect and unnecessary checks for other entries when adding a new devices. The removed checks and corrections were mostly redundant with what is already done by device id matching. Other checking is reworked so the warnings are a bit different.
2022-01-25 20:35:36 +03:00
if (du_devid->dev == dev) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/* update the existing entry with matching devid */
update_du = du_devid;
dm_list_del(&update_du->list);
update_matching_kind = "device_id";
update_matching_name = id->idname;
}
}
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free((void *)check_idname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!update_du) {
log_debug("Adding new entry to devices file for %s PVID %s %s %s.",
dev_name(dev), pvid, idtype_to_str(id->idtype), id->idname);
if (!(du = zalloc(sizeof(struct dev_use))))
return_0;
} else {
du = update_du;
log_debug("Updating existing entry in devices file for %s that matches %s %s.",
dev_name(dev), update_matching_kind, update_matching_name);
}
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->idname);
free(du->devname);
free(du->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->idtype = id->idtype;
du->idname = strdup(id->idname);
du->devname = strdup(dev_name(dev));
du->dev = dev;
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
du->pvid = strdup_pvid(pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_get_partition_number(dev, &du->part);
if (!du->idname || !du->devname || !du->pvid) {
free_du(du);
return_0;
}
dm_list_add(&cmd->use_devices, &du->list);
return 1;
}
/*
* Update entry for this dev.
* Set PVID=.
* update entry in cmd->use_devices
*/
void device_id_pvremove(struct cmd_context *cmd, struct device *dev)
{
struct dev_use *du;
if (!cmd->enable_devices_file)
return;
if (!(du = get_du_for_dev(cmd, dev))) {
log_warn("WARNING: devices to use does not include %s", dev_name(dev));
return;
}
if (du->pvid) {
free(du->pvid);
du->pvid = NULL;
}
}
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
void device_id_update_vg_uuid(struct cmd_context *cmd, struct volume_group *vg, struct id *old_vg_id)
{
struct dev_use *du;
struct lv_list *lvl;
char old_vgid[ID_LEN+1] = { 0 };
char new_vgid[ID_LEN+1] = { 0 };
char old_idname[PATH_MAX];
int update = 0;
if (!cmd->enable_devices_file)
devices file: remove extraneous unlock in vgchange -u vgchange -u exit path was unlocking the devices file in cases when it wasn't needed, which produced an warning.
2022-04-13 20:16:57 +03:00
return;
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
/* Without this setting there is no stacking LVs on PVs. */
if (!cmd->scan_lvs)
devices file: remove extraneous unlock in vgchange -u vgchange -u exit path was unlocking the devices file in cases when it wasn't needed, which produced an warning.
2022-04-13 20:16:57 +03:00
return;
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
/* Check if any devices file entries are stacked on LVs. */
if (!_device_ids_use_lvmlv(cmd))
devices file: remove extraneous unlock in vgchange -u vgchange -u exit path was unlocking the devices file in cases when it wasn't needed, which produced an warning.
2022-04-13 20:16:57 +03:00
return;
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
memcpy(old_vgid, old_vg_id, ID_LEN);
memcpy(new_vgid, &vg->id, ID_LEN);
/*
* for each LV in VG, if there is a du for that LV (meaning a PV exists
* on the LV), then update the du idname, replacing the old vgid with
* the new vgid.
*/
dm_list_iterate_items(lvl, &vg->lvs) {
memset(old_idname, 0, sizeof(old_idname));
memcpy(old_idname, "LVM-", 4);
memcpy(old_idname+4, old_vgid, ID_LEN);
memcpy(old_idname+4+ID_LEN, &lvl->lv->lvid.id[1], ID_LEN);
lvmdevices: --deldev using device id When used with --deviceidtype, --deldev can specify a device id to remove.
2022-04-06 20:29:26 +03:00
if ((du = get_du_for_device_id(cmd, DEV_ID_TYPE_LVMLV_UUID, old_idname))) {
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
log_debug("device_id update %s pvid %s vgid %s to %s",
du->devname ?: ".", du->pvid ?: ".", old_vgid, new_vgid);
memcpy(du->idname+4, new_vgid, ID_LEN);
update = 1;
if (du->dev && du->dev->id && (du->dev->id->idtype == DEV_ID_TYPE_LVMLV_UUID))
memcpy(du->dev->id->idname+4, new_vgid, ID_LEN);
}
}
cov: check device_ids_write return code At least 'stack' failure code path as the function device_id_update_vg_uuid() is void.
2021-10-15 16:04:43 +03:00
if (update &&
!device_ids_write(cmd))
stack;
device_id: update stacked PVs for vgchange uuid If a VG uuid is changed, update the device_id of any PVs stacked on LVs in the changed VG.
2021-10-04 23:47:25 +03:00
unlock_devices_file(cmd);
}
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
static int _idtype_compatible_with_major_number(struct cmd_context *cmd, int idtype, unsigned major)
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
{
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
/* devname can be used with any kind of device */
if (idtype == DEV_ID_TYPE_DEVNAME)
return 1;
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
if (idtype == DEV_ID_TYPE_MPATH_UUID ||
idtype == DEV_ID_TYPE_CRYPT_UUID ||
idtype == DEV_ID_TYPE_LVMLV_UUID)
return (major == cmd->dev_types->device_mapper_major);
if (idtype == DEV_ID_TYPE_MD_UUID)
return (major == cmd->dev_types->md_major);
if (idtype == DEV_ID_TYPE_LOOP_FILE)
return (major == cmd->dev_types->loop_major);
if (major == cmd->dev_types->device_mapper_major)
return (idtype == DEV_ID_TYPE_MPATH_UUID ||
idtype == DEV_ID_TYPE_CRYPT_UUID ||
idtype == DEV_ID_TYPE_LVMLV_UUID ||
idtype == DEV_ID_TYPE_DEVNAME);
if (major == cmd->dev_types->md_major)
return (idtype == DEV_ID_TYPE_MD_UUID ||
idtype == DEV_ID_TYPE_DEVNAME);
if (major == cmd->dev_types->loop_major)
return (idtype == DEV_ID_TYPE_LOOP_FILE ||
idtype == DEV_ID_TYPE_DEVNAME);
return 1;
}
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
static int _match_dm_names(struct cmd_context *cmd, char *idname, struct device *dev)
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
{
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
struct device *dev2;
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
struct stat buf;
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
/*
* An alternate dm name may already be in dev-cache from dev_cache_scan(),
* in which case both names point to the same struct device.
*/
dev2 = dev_cache_get_existing(cmd, idname, NULL);
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
if (dev2 && (dev == dev2)) {
log_debug("Match dm names %s %s for %d:%d (from cache)",
dev_name(dev), idname, (int)MAJOR(dev->dev), (int)MINOR(dev->dev));
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
return 1;
}
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
if (dev2)
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
return 0;
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
/*
* Optimized commands (like pvscan) can avoid a full dev_cache_scan(),
* in which case all the dev aliases will not already exist in dev-cache,
* so check if the system has a device with the given name.
*/
if (!strncmp(idname, "/dev/dm-", 8) || !strncmp(idname, "/dev/mapper/", 12)) {
if (stat(idname, &buf))
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
return 0;
if ((MAJOR(buf.st_rdev) == cmd->dev_types->device_mapper_major) &&
(MINOR(buf.st_rdev) == MINOR(dev->dev))) {
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
log_debug("Match dm names %s %s for %d:%d (from stat)",
dev_name(dev), idname, (int)MAJOR(dev->dev), (int)MINOR(dev->dev));
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
return 1;
}
}
return 0;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
* du is a devices file entry. dev is any device on the system.
* check if du is for dev by comparing the device's ids to du->idname.
*
* check for a dev->ids entry with du->idtype, if found compare it,
* if not, system_read idtype for the dev, add entry to dev->ids,
* compare it to du to check if it matches.
*
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* When a match is found, set up links among du/id/dev.
*/
static int _match_du_to_dev(struct cmd_context *cmd, struct dev_use *du, struct device *dev)
{
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
char du_idname[PATH_MAX];
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
struct dev_id *id;
const char *idname;
int part;
device_id: searched_devnames improvements Remove the searched_devnames file in a couple more places: . When hints need refreshing it's possible that a missing devices file entry could be found by searching devices again. . When a devices file entry devname is first found to be incorrect, a new search for missing entries may be useful.
2021-11-16 20:26:41 +03:00
/*
* The idname will be removed from an entry with devname type when the
* devname is read and found to hold a different PVID than the PVID in
* the entry. At that point we only have the PVID and no known
* location for it.
*/
if (!du->idname || !du->idtype) {
/*
log_debug("Mismatch device_id %s %s %s to %s",
du->idtype ? idtype_to_str(du->idtype) : "idtype_missing",
du->idname ? du->idname : "idname_missing",
du->devname ? du->devname : "devname_missing",
dev_name(dev));
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
device_id: searched_devnames improvements Remove the searched_devnames file in a couple more places: . When hints need refreshing it's possible that a missing devices file entry could be found by searching devices again. . When a devices file entry devname is first found to be incorrect, a new search for missing entries may be useful.
2021-11-16 20:26:41 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
/*
* Some idtypes can only match devices with a specific major number,
* so we can skip trying to match certain du entries based simply on
* the major number of dev.
*/
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
if (!_idtype_compatible_with_major_number(cmd, du->idtype, (int)MAJOR(dev->dev))) {
/*
log_debug("Mismatch device_id %s %s to %s: wrong major",
idtype_to_str(du->idtype), du->idname ?: ".", dev_name(dev));
*/
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
return 0;
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
}
devices: restrict device id types to specific major numbers Some device id types can only be used with specific device major numbers, so use this restriction to avoid some comparisions. This is more efficient, and can avoid some incorrect matches.
2021-08-23 23:01:26 +03:00
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!dev_get_partition_number(dev, &part)) {
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
/*
log_debug("Mismatch device_id %s %s to %s: no partition",
idtype_to_str(du->idtype), du->idname ?: ".", dev_name(dev));
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
}
if (part != du->part) {
/*
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
log_debug("Mismatch device_id %s %s to %s: wrong partition %d vs %d",
idtype_to_str(du->idtype), du->idname ?: ".", dev_name(dev), du->part, part);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
return 0;
}
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
if (du->idtype == DEV_ID_TYPE_DEVNAME) {
int is_dm = (MAJOR(dev->dev) == cmd->dev_types->device_mapper_major);
idname = dev_name(dev);
if (!strcmp(du->idname, idname) || (is_dm && _match_dm_names(cmd, du->idname, dev))) {
if (!(id = zalloc(sizeof(struct dev_id))))
return_0;
id->idtype = DEV_ID_TYPE_DEVNAME;
id->idname = strdup(du->idname);
dm_list_add(&dev->ids, &id->list);
du->dev = dev;
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
log_debug("Match %s %s to %s",
idtype_to_str(du->idtype), du->idname, dev_name(dev));
return 1;
}
return 0;
}
device id: change space handling in t10 wwid t10 wwids are now edited in the same way that multipath does, which is replacing a series of spaces with one _. Previously lvm replaced every space with one _. Devices file entries with the old form will be converted to the new shorter form.
2022-08-31 23:59:28 +03:00
/*
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
* sys_wwid and sys_serial were saved in the past with leading and
* trailing spaces replaced with underscores, and t10 wwids also had
* repeated internal spaces replaced with one underscore each. Now we
* ignore leading and trailing spaces and replace multiple repeated
* spaces with one underscore in t10 wwids. In order to handle
* system.devices entries created by older versions, modify the IDNAME
* value that's read (du->idname) to remove leading and trailing
* underscores, and reduce repeated underscores to one in t10 wwids.
*
* Example: wwid is reported as " t10.123 456 " (without quotes)
* Previous versions would save this in system.devices as: __t10.123__456__
* Current versions will save this in system.devices as: t10.123_456
* device_id_system_read() now returns: t10.123_456
* When this code reads __t10.123__456__ from system.devices, that
* string is modified to t10.123_456 so that it will match the value
* returned from device_id_system_read().
device id: change space handling in t10 wwid t10 wwids are now edited in the same way that multipath does, which is replacing a series of spaces with one _. Previously lvm replaced every space with one _. Devices file entries with the old form will be converted to the new shorter form.
2022-08-31 23:59:28 +03:00
*/
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
strncpy(du_idname, du->idname, PATH_MAX-1);
if (((du->idtype == DEV_ID_TYPE_SYS_WWID) || (du->idtype == DEV_ID_TYPE_SYS_SERIAL)) &&
strchr(du_idname, '_')) {
_remove_leading_underscores(du_idname, sizeof(du_idname));
_remove_trailing_underscores(du_idname, sizeof(du_idname));
if (du->idtype == DEV_ID_TYPE_SYS_WWID && !strncmp(du_idname, "t10", 3) && strstr(du_idname, "__"))
_reduce_repeating_underscores(du_idname, sizeof(du_idname));
device_id: ignore trailing underscores in t10 wwid from devices file In previous lvm versions, trailing spaces at the end of a t10 wwid would be replaced with underscores, so the IDNAME string in system.devices would look something like "t10.123_". Current versions of lvm ignore trailing spaces in a t10 wwid, so the IDNAME string used would be "t10.123". The different values would cause lvm to not recognize a device in system.devices with the trailing _. Fix this by ignoring trailing underscores in the IDNAME string from system.devices.
2023-05-19 20:52:48 +03:00
}
device id: change space handling in t10 wwid t10 wwids are now edited in the same way that multipath does, which is replacing a series of spaces with one _. Previously lvm replaced every space with one _. Devices file entries with the old form will be converted to the new shorter form.
2022-08-31 23:59:28 +03:00
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
/*
* Try to match du with ids that have already been read for the dev
* (and saved on dev->ids to avoid rereading.)
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dm_list_iterate_items(id, &dev->ids) {
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (!id->idname)
continue;
device_id: ignore trailing underscores in t10 wwid from devices file In previous lvm versions, trailing spaces at the end of a t10 wwid would be replaced with underscores, so the IDNAME string in system.devices would look something like "t10.123_". Current versions of lvm ignore trailing spaces in a t10 wwid, so the IDNAME string used would be "t10.123". The different values would cause lvm to not recognize a device in system.devices with the trailing _. Fix this by ignoring trailing underscores in the IDNAME string from system.devices.
2023-05-19 20:52:48 +03:00
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (id->idtype == du->idtype) {
if (!strcmp(id->idname, du_idname)) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->dev = dev;
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Match %s %s to %s",
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
idtype_to_str(du->idtype), du_idname, dev_name(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
}
device_id: simplify devname matching Handle this case directly rather than going through the process for reading other device ids. Also simplify matching alternate dm devnames.
2023-10-23 22:27:36 +03:00
return 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
}
if (!(id = zalloc(sizeof(struct dev_id))))
return_0;
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
idname = device_id_system_read(cmd, dev, du->idtype);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
* Save this id for the dev, even if it doesn't exist (NULL)
* or doesn't match du. This avoids system_read of this idtype
* repeatedly, and the saved id will be found in the loop
* over dev->ids above.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
id->idtype = du->idtype;
device_id: no idname should be NULL not empty string One place was setting idname to "" instead of NULL when there was no idname value.
2023-10-18 00:49:30 +03:00
id->idname = (char *)idname;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dm_list_add(&dev->ids, &id->list);
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (idname && !strcmp(idname, du_idname)) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->dev = dev;
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Match %s %s to %s",
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
idtype_to_str(du->idtype), idname, dev_name(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
}
/*
device_id: match different dm device names If a devices file entry for a dm device is using the devname for the device id, then recognize different dm names as matching.
2021-11-13 01:42:51 +03:00
log_debug("Mismatch device_id %s %s to %s: idname %s",
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
idtype_to_str(du->idtype), du->idname ?: ".", dev_name(dev), idname ?: ".");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
device id wwid adjustments Move the functions handling dev wwids. Add dev flags indicating that wwids have been read from sysfs wwid file or sysfs vpd_pg83 file. This can be used to avoid rereading these. Improve filter-mpath search for a device's wwid in /etc/multipath/wwids, to avoid unnecessary rereading of wwids from sysfs files. Type 8 wwids from vpd_pg83 with naa or eui names should be saved as those types.
2022-08-30 23:10:52 +03:00
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
/*
* Make the du match this device if the dev has a vpd_pg83 wwid
* that matches du->idname, even if the sysfs wwid for dev did
* not match the du->idname. This could happen if sysfs changes
* which wwid it reports (there are often multiple), or if lvm in
* the future selects a sys_wwid value from vpd_pg83 data rather
* than from the sysfs wwid.
*
* TODO: update the df entry IDTYPE somewhere?
*/
if (du->idtype == DEV_ID_TYPE_SYS_WWID) {
struct dev_wwid *dw;
if (!(dev->flags & DEV_ADDED_VPD_WWIDS))
dev_read_vpd_wwids(cmd, dev);
dm_list_iterate_items(dw, &dev->wwids) {
device_id: ignore leading and trailing spaces for sys_wwid and sys_serial Leading and trailing underscores are also ignored to handle device ids written by previous versions which replaced all spaces with underscores.
2023-06-15 21:58:48 +03:00
if (!strcmp(dw->id, du_idname)) {
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
if (!(id = zalloc(sizeof(struct dev_id))))
return_0;
/* wwid types are 1,2,3 and idtypes are DEV_ID_TYPE_ */
id->idtype = wwid_type_to_idtype(dw->type);
id->idname = strdup(dw->id);
dm_list_add(&dev->ids, &id->list);
du->dev = dev;
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Match %s %s to %s: using vpd_pg83 %s %s",
idtype_to_str(du->idtype), du_idname, dev_name(dev),
idtype_to_str(id->idtype), id->idname ?: ".");
device id: add new types using values from vpd_pg83 The new device_id types are: wwid_naa, wwid_eui, wwid_t10. The new types use the specific wwid type in their name. lvm currently gets the values for these types by reading the device's vpd_pg83 sysfs file (this could change in the future if better methods become available for reading the values.) If a device is added to the devices file using one of these types, prior versions of lvm will not recognize the types and will be unable to use the devices. When adding a new device, lvm continues to first use sys_wwid from the sysfs wwid file. If the device has no sysfs wwid file, lvm now attempts to use one of the new types from vpd_pg83. If a devices file entry with type sys_wwid does not match a given device's sysfs wwid file, the sys_wwid value will also be compared to that device's other wwids from its vpd_pg83 file. If the kernel changes the wwid type reported from the sysfs wwid file, e.g. from a device's t10 id to its naa id, then lvm should still be able to match it correctly using the vpd_pg83 data which will include both ids.
2022-09-01 00:05:07 +03:00
du->idtype = id->idtype;
return 1;
}
}
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 0;
}
int device_ids_match_dev(struct cmd_context *cmd, struct device *dev)
{
struct dev_use *du;
/* First check the du entry with matching devname since it's likely correct. */
lvmdevices: make deldev work for missing device
2022-02-04 01:56:03 +03:00
if ((du = get_du_for_devname(cmd, dev_name(dev)))) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (_match_du_to_dev(cmd, du, dev))
return 1;
}
/* Check all du entries since the devname could have changed. */
dm_list_iterate_items(du, &cmd->use_devices) {
if (!_match_du_to_dev(cmd, du, dev))
continue;
return 1;
}
return 0;
}
/*
* For each entry on cmd->use_devices (entries in the devices file),
* find a struct device from dev-cache. They are paired based strictly
* on the device id.
*
* This must not open or read devices. This function cannot use filters.
* filters are applied after this, and the filters may open devs in the first
* nodata filtering. The second filtering, done after label_scan has read
* a device, is allowed to read a device to evaluate filters that need to see
* data from the dev.
*
* When a device id of a particular type is obtained for a dev, a id for that
* type is saved in dev->ids in case it needs to be checked again.
*
* When a device in dev-cache is matched to an entry in the devices file
* (a struct dev_use), then:
* . du->dev = dev;
* . dev->id = id;
* . dev->flags |= DEV_MATCHED_USE_ID;
*
* Later when filter-deviceid is run to exclude devices that are not
* included in the devices file, the filter checks if DEV_MATCHED_USE_ID
* is set which means that the dev matches a devices file entry and
* passes the filter.
*/
pvscan: only add device args to dev cache Optimize the common pvscan --cache command by only adding the necessary devs to dev-cache.
2021-10-19 00:24:24 +03:00
void device_ids_match_device_list(struct cmd_context *cmd)
{
struct dev_use *du;
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->dev)
continue;
devices: initial use of existing option Use dev_cache_get_existing() in a few common, high level locations where it's obvious that only existing dev-cache entries are wanted. This can be expanded and used in more locations (or dev_cache_get can stop creating new entries.)
2022-02-25 01:10:37 +03:00
if (!(du->dev = dev_cache_get_existing(cmd, du->devname, NULL))) {
pvscan: only add device args to dev cache Optimize the common pvscan --cache command by only adding the necessary devs to dev-cache.
2021-10-19 00:24:24 +03:00
log_warn("Device not found for %s.", du->devname);
} else {
/* Should we set dev->id? Which idtype? Use --deviceidtype? */
du->dev->flags |= DEV_MATCHED_USE_ID;
}
}
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
void device_ids_match(struct cmd_context *cmd)
{
struct dev_iter *iter;
struct dev_use *du;
struct device *dev;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
int found;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (cmd->enable_devices_list) {
pvscan: only add device args to dev cache Optimize the common pvscan --cache command by only adding the necessary devs to dev-cache.
2021-10-19 00:24:24 +03:00
device_ids_match_device_list(cmd);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return;
}
if (!cmd->enable_devices_file)
return;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
log_debug("Matching devices file entries to devices");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* We would set cmd->filter_deviceid_skip but we are disabling
* all filters (dev_cache_get NULL arg) so it's not necessary.
*/
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
/*
* First try matching entries with IDTYPE other than devname.
* We don't want a false idtype=devname match to interfere
* with matching a proper idtype.
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dm_list_iterate_items(du, &cmd->use_devices) {
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
if (du->idtype == DEV_ID_TYPE_DEVNAME)
continue;
/* TODO: when does this happen? */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/* already matched */
if (du->dev) {
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Match %s %s PVID %s: done previously %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(du->dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
}
/*
* du->devname from the devices file is the last known
* device name. It may be incorrect, but it's usually
* correct, so it's an efficient place to check for a
* match first.
*
* NULL filter is used because we are just setting up the
* the du/dev pairs in preparation for using the filters.
*/
if (du->devname &&
devices: initial use of existing option Use dev_cache_get_existing() in a few common, high level locations where it's obvious that only existing dev-cache entries are wanted. This can be expanded and used in more locations (or dev_cache_get can stop creating new entries.)
2022-02-25 01:10:37 +03:00
(dev = dev_cache_get_existing(cmd, du->devname, NULL))) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/* On successful match, du, dev, and id are linked. */
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
if (_match_du_to_dev(cmd, du, dev)) {
log_debug("Match %s %s PVID %s: done %s (immediate)",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(du->dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
} else {
log_debug("Match %s %s PVID %s: wrong devname %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
du->devname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
}
/*
* Iterate through all devs and try to match du.
*
* If a match is made here it means the du->devname is wrong,
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
* so the devices file should be updated with a new devname.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*
* NULL filter is used because we are just setting up the
* the du/dev pairs in preparation for using the filters.
*/
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
found = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!(iter = dev_iter_create(NULL, 0)))
continue;
while ((dev = dev_iter_get(cmd, iter))) {
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
/* skip a dev that's already matched to another entry */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (dev->flags & DEV_MATCHED_USE_ID)
continue;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
if (_match_du_to_dev(cmd, du, dev)) {
log_debug("Match %s %s PVID %s: done %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(du->dev));
found = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
break;
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
dev_iter_destroy(iter);
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
if (!found)
log_debug("Match %s %s PVID %s: no device matches",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
}
/*
* Next match entries with IDTYPE=devname, which is only
* based on matching devname, so somewhat likely to be wrong
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
* and need correcting in device_ids_validate/device_ids_search.
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
*/
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idtype != DEV_ID_TYPE_DEVNAME)
continue;
if (!du->idname) {
log_debug("Match %s %s PVID %s: no idname",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
continue;
}
/* TODO: when does this happen? */
/* already matched */
if (du->dev) {
log_debug("Match %s %s PVID %s: done previously %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(du->dev));
continue;
}
if (!(dev = dev_cache_get_existing(cmd, du->idname, NULL))) {
log_debug("Match %s %s PVID %s: idname not found",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
continue;
}
if (dev->flags & DEV_MATCHED_USE_ID) {
log_debug("Match %s %s PVID %s: dev %s already matched to an entry",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", dev_name(dev));
continue;
}
if (_match_du_to_dev(cmd, du, dev)) {
log_debug("Match %s %s PVID %s: done %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(du->dev));
continue;
}
log_debug("Match %s %s PVID %s: no device matches",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
devices file: limit warnings about devices file entries not found All commands were printing a warning if a devices file entry was not found. Limit this to commands that report/display lvm state.
2021-07-27 23:28:34 +03:00
if (!cmd->print_device_id_not_found)
return;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Look for entries in devices file for which we found no device.
*/
dm_list_iterate_items(du, &cmd->use_devices) {
/* Found a device for this entry. */
if (du->dev && (du->dev->flags & DEV_MATCHED_USE_ID))
continue;
/* This shouldn't be possible. */
if (du->dev && !(du->dev->flags & DEV_MATCHED_USE_ID)) {
log_error("Device %s not matched to device_id", dev_name(du->dev));
continue;
}
/* A detached device would get here which isn't uncommon. */
if ((du->idtype == DEV_ID_TYPE_DEVNAME) && du->devname)
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Devices file PVID %s last seen on %s not found.",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->pvid ?: "none",
du->devname ?: "none");
else if (du->idtype == DEV_ID_TYPE_DEVNAME)
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Devices file PVID %s not found.",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->pvid ?: "none");
else if (du->devname)
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Devices file %s %s PVID %s last seen on %s not found.",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
idtype_to_str(du->idtype),
du->idname ?: "none",
du->pvid ?: "none",
du->devname);
else
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Devices file %s %s PVID %s not found.",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
idtype_to_str(du->idtype),
du->idname ?: "none",
du->pvid ?: "none");
}
}
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
static void _get_devs_with_serial_numbers(struct cmd_context *cmd, struct dm_list *serial_str_list, struct dm_list *devs)
{
struct dev_iter *iter;
struct device *dev;
struct device_list *devl;
struct dev_id *id;
const char *idname;
if (!(iter = dev_iter_create(NULL, 0)))
return;
while ((dev = dev_iter_get(cmd, iter))) {
/* if serial has already been read for this dev then use it */
dm_list_iterate_items(id, &dev->ids) {
device_id: no idname should be NULL not empty string One place was setting idname to "" instead of NULL when there was no idname value.
2023-10-18 00:49:30 +03:00
if (id->idtype == DEV_ID_TYPE_SYS_SERIAL && id->idname) {
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
if (str_list_match_item(serial_str_list, id->idname)) {
if (!(devl = dm_pool_zalloc(cmd->mem, sizeof(*devl))))
device_id: _get_devs_with_serial_numbers add missing free on malloc failure path
2022-12-01 20:43:24 +03:00
goto next_continue;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
devl->dev = dev;
dm_list_add(devs, &devl->list);
}
device_id: _get_devs_with_serial_numbers add missing free on malloc failure path
2022-12-01 20:43:24 +03:00
goto next_continue;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
}
}
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
/* just copying the no-data filters in similar device_ids_search */
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "sysfs"))
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "type"))
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "usable"))
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "mpath"))
continue;
if ((idname = device_id_system_read(cmd, dev, DEV_ID_TYPE_SYS_SERIAL))) {
if (str_list_match_item(serial_str_list, idname)) {
if (!(devl = dm_pool_zalloc(cmd->mem, sizeof(*devl))))
device_id: _get_devs_with_serial_numbers add missing free on malloc failure path
2022-12-01 20:43:24 +03:00
goto next_free;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
if (!(id = zalloc(sizeof(struct dev_id))))
device_id: _get_devs_with_serial_numbers add missing free on malloc failure path
2022-12-01 20:43:24 +03:00
goto next_free;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
id->idtype = DEV_ID_TYPE_SYS_SERIAL;
id->idname = (char *)idname;
dm_list_add(&dev->ids, &id->list);
devl->dev = dev;
dm_list_add(devs, &devl->list);
device_id: _get_devs_with_serial_numbers add missing free on malloc failure path
2022-12-01 20:43:24 +03:00
idname = NULL;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
}
}
device_id: _get_devs_with_serial_numbers add missing free on malloc failure path
2022-12-01 20:43:24 +03:00
next_free:
if (idname)
free((char *)idname);
next_continue:
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
continue;
}
dev_iter_destroy(iter);
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* This is called after devices are scanned to compare what was found on disks
* vs what's in the devices file. The devices file could be outdated and need
* correcting; the authoritative data is what's on disk. Now that we have read
* the device labels and know the PVID's from disk we can check the PVID's in
* use_devices entries from the devices file.
*/
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
void device_ids_validate(struct cmd_context *cmd, struct dm_list *scanned_devs, int using_hints, int noupdate, int *update_needed)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
struct dm_list wrong_devs;
gcc: initialize variables
2023-08-23 15:43:07 +03:00
struct device *dev = NULL;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
struct device_list *devl;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
struct dev_use *du, *du2;
struct dev_id *id;
const char *devname;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
char *tmpdup;
int update_file = 0;
dm_list_init(&wrong_devs);
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 0;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!cmd->enable_devices_file)
return;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_debug("Validating devices file entries");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
dm_list_iterate_items(du, &cmd->use_devices) {
log_debug("Validating %s %s PVID %s: initial match %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
du->dev ? dev_name(du->dev) : "not set");
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Validate entries with proper device id types.
* idname is the authority for pairing du and dev.
*/
dm_list_iterate_items(du, &cmd->use_devices) {
if (!du->dev)
continue;
/* For this idtype the idname match is unreliable. */
if (du->idtype == DEV_ID_TYPE_DEVNAME)
continue;
dev = du->dev;
/*
* scanned_devs are the devices that have been scanned,
* so they are the only devs we can verify PVID for.
*/
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (scanned_devs && !device_list_find_dev(scanned_devs, dev)) {
log_debug("Validate %s %s PVID %s on %s: not scanned",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", dev_name(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices file: do not clear PVID of unread devices In a certain disconnected state, a block device is present on the system, can be opened, reports a valid size, reports the correct device id (wwid), and matches a devices file entry. But, reading the device can still fail. In this case, device_ids_validate() was misinterpreting the read error as the device having no data/label on it (and no PVID). The validate function would then clear the PVID from the devices file entry for the device, thinking that it was fixing the devices file (making it consistent with the on disk state.) Fix this by not attempting to check and correct a devices file entry that cannot be read. Also make this case explicit in the hints validation code (which was doing the right thing but indirectly.)
2022-02-10 23:00:25 +03:00
/*
* The matched device could not be read so we do not have
* the PVID from disk and cannot verify the devices file entry.
*/
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (dev->flags & DEV_SCAN_NOT_READ) {
log_debug("Validate %s %s PVID %s on %s: not read",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", dev_name(dev));
devices file: do not clear PVID of unread devices In a certain disconnected state, a block device is present on the system, can be opened, reports a valid size, reports the correct device id (wwid), and matches a devices file entry. But, reading the device can still fail. In this case, device_ids_validate() was misinterpreting the read error as the device having no data/label on it (and no PVID). The validate function would then clear the PVID from the devices file entry for the device, thinking that it was fixing the devices file (making it consistent with the on disk state.) Fix this by not attempting to check and correct a devices file entry that cannot be read. Also make this case explicit in the hints validation code (which was doing the right thing but indirectly.)
2022-02-10 23:00:25 +03:00
continue;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
}
devices file: do not clear PVID of unread devices In a certain disconnected state, a block device is present on the system, can be opened, reports a valid size, reports the correct device id (wwid), and matches a devices file entry. But, reading the device can still fail. In this case, device_ids_validate() was misinterpreting the read error as the device having no data/label on it (and no PVID). The validate function would then clear the PVID from the devices file entry for the device, thinking that it was fixing the devices file (making it consistent with the on disk state.) Fix this by not attempting to check and correct a devices file entry that cannot be read. Also make this case explicit in the hints validation code (which was doing the right thing but indirectly.)
2022-02-10 23:00:25 +03:00
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* du and dev may have been matched, but the dev could still
* have been excluded by other filters during label scan.
* This shouldn't generally happen, but if it does the user
* probably wants to do something about it.
*/
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "persistent")) {
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
log_debug("Validate %s %s PVID %s on %s: filtered (%s)",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(dev), dev_filtered_reason(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
}
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
/*
* If the PVID doesn't match, don't assume that the serial
* number is correct, since serial numbers may not be unique.
* Search for the PVID on other devs in device_ids_check_serial.
*/
cov: enusure pointer to idname exists
2023-10-14 17:53:58 +03:00
if ((du->idtype == DEV_ID_TYPE_SYS_SERIAL) && du->pvid && du->idname &&
device_id: fix segfault verifying serial for non-pv The recent change that verifies sys_serial system.devices entries using the PVID did not exclude non-PV devices from being checked. The verification code would attempt to use du->pvid which was null for the non-PVs causing a segfault.
2022-12-02 20:59:09 +03:00
memcmp(dev->pvid, du->pvid, ID_LEN)) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_debug("Validate %s %s PVID %s on %s: wrong PVID %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(dev), dev->pvid);
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
log_debug("suspect device id serial %s for %s", du->idname, dev_name(dev));
debug: trace result failure
2023-08-31 19:50:08 +03:00
if (!str_list_add(cmd->mem, &cmd->device_ids_check_serial, dm_pool_strdup(cmd->mem, du->idname)))
stack;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
continue;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* If the du pvid from the devices file does not match the
* pvid read from disk, replace the du pvid with the pvid from
* disk and update the pvid in the devices file entry.
*/
if (dev->pvid[0]) {
if (!du->pvid || memcmp(dev->pvid, du->pvid, ID_LEN)) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_debug("Validate %s %s PVID %s on %s: wrong PVID %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(dev), dev->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
log_warn("Device %s has PVID %s (devices file %s)",
dev_name(dev), dev->pvid, du->pvid ?: "none");
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
if (!(tmpdup = strdup_pvid(dev->pvid)))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->pvid = tmpdup;
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
} else {
if (du->pvid && (du->pvid[0] != '.')) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_debug("Validate %s %s PVID %s on %s: wrong PVID %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(dev), dev->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
log_warn("Device %s has no PVID (devices file %s)",
dev_name(dev), du->pvid);
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->pvid = NULL;
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
log_debug("Validate %s %s PVID %s on %s: correct",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(dev));
devices file: avoid updating entry dev names in some cases Avoid thrashing changes to devices file device names by some commands that are run during startup when devnames are still being set up.
2021-07-28 00:56:20 +03:00
/*
* Avoid thrashing changes to the devices file during
* startup due to device names that are still being
* established. Commands that may run during startup
* should set this flag.
*/
if (cmd->ignore_device_name_mismatch)
continue;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!du->devname || strcmp(dev_name(du->dev), du->devname)) {
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
log_debug("Validate %s %s PVID %s on %s: outdated DEVNAME %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".",
dev_name(dev), du->devname ?: "none");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!(tmpdup = strdup(dev_name(du->dev))))
continue;
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->devname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->devname = tmpdup;
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
}
/*
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
* Validate entries with DEVNAME device id type.
* pvid is the authority for pairing du and dev.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idtype != DEV_ID_TYPE_DEVNAME)
continue;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
if (!du->pvid)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
/*
* Correctly matched du and dev.
* The DEVNAME hint could still need an update.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
if (du->dev && !memcmp(du->dev->pvid, du->pvid, ID_LEN)) {
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
dev = du->dev;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
devname = dev_name(du->dev);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
log_debug("Validate %s %s PVID %s on %s: correct",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", devname);
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
/* This shouldn't happen since idname was used to match du and dev */
if (!du->idname || strcmp(devname, du->idname)) {
log_warn("WARNING: fixing devices file IDNAME %s for PVID %s device %s",
du->idname ?: ".", du->pvid, dev_name(dev));
if (!(tmpdup = strdup(devname)))
continue;
free(du->idname);
du->idname = tmpdup;
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
/* Fix the DEVNAME field if it's outdated. */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!du->devname || strcmp(devname, du->devname)) {
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
log_debug("Validate %s %s PVID %s on %s: outdated DEVNAME %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", devname,
du->devname ?: ".");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!(tmpdup = strdup(devname)))
continue;
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->devname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->devname = tmpdup;
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
continue;
}
/*
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
* Incorrectly matched du and dev, or unconfirmed match due to
* the dev not being scanned/read (so we don't know the PVID the dev.)
* Disassociate the dev from the du. If wrong_devs are not paired to
* any du at the end, then those devs are cleared from lvmcache,
* since we don't want the command to see or use devs not included
* in the devices file.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
if (du->dev) {
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
dev = du->dev;
devname = dev_name(du->dev);
device_id: fix lvmdevices update segfault From commit 1901a47df12 "device_id: fix conditions for device_ids_refresh"
2023-10-06 20:24:34 +03:00
if ((scanned_devs && !device_list_find_dev(scanned_devs, du->dev)) ||
(du->dev->flags & DEV_SCAN_NOT_READ)) {
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
log_debug("Validate %s %s PVID %s on %s: not scanned",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", devname);
} else {
log_debug("Validate %s %s PVID %s on %s: wrong PVID %s.",
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", devname, dev->pvid);
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
if ((devl = dm_pool_zalloc(cmd->mem, sizeof(*devl)))) {
devl->dev = du->dev;
dm_list_add(&wrong_devs, &devl->list);
}
cmd->device_ids_invalid = 1;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
}
du->dev->flags &= ~DEV_MATCHED_USE_ID;
du->dev->id = NULL;
du->dev = NULL;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
/*
* Find a new dev that matches du, using the devs that have
* been scanned for a label so far. The identity of this du is
* it's pvid, the dev is variable, so if another dev has this
* pvid, then reset all the du values to correspond to the new
* dev.
*/
if ((dev = dev_cache_get_by_pvid(cmd, du->pvid))) {
char *dup_devname1, *dup_devname2, *dup_devname3;
devname = dev_name(dev);
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
log_debug("Validate %s %s PVID %s: found on %s",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".", devname);
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
dup_devname1 = strdup(devname);
dup_devname2 = strdup(devname);
dup_devname3 = strdup(devname);
id = zalloc(sizeof(struct dev_id));
if (!dup_devname1 || !dup_devname2 || !dup_devname3 || !id) {
free(dup_devname1);
free(dup_devname2);
free(dup_devname3);
free(id);
stack;
continue;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
free(du->idname);
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
free(du->devname);
free_dids(&dev->ids);
du->idname = dup_devname1;
du->devname = dup_devname2;
id->idname = dup_devname3;
du->dev = dev;
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
dm_list_add(&dev->ids, &id->list);
dev_get_partition_number(dev, &du->part);
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
continue;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
/*
* Each remaining du that's not matched to a dev (no du->dev set) is
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
* subject to device_ids_search which will look for unmatched pvids on
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
* devs that have not been scanned yet.
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
*/
dm_list_iterate_items(du, &cmd->use_devices) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
/*
* Only search for devname type entries unless the refresh
* trigger is set due to a machine change, in which case
* we look for missing PVIDs on new devs with real idtypes.
*/
if ((du->idtype != DEV_ID_TYPE_DEVNAME) && !cmd->device_ids_refresh_trigger)
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
continue;
if (!du->pvid)
continue;
if (du->dev)
continue;
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
log_debug("Validate %s %s PVID %s: no device found",
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
}
/*
* For each du with no matching dev, if du->pvid is being used in
* another entry with a properly matching dev, then clear du->pvid.
*/
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idtype != DEV_ID_TYPE_DEVNAME)
continue;
if (!du->pvid)
continue;
if (du->dev)
continue;
dm_list_iterate_items(du2, &cmd->use_devices) {
if (du == du2)
continue;
if (du2->idtype != DEV_ID_TYPE_DEVNAME)
continue;
if (!du2->pvid)
continue;
if (!du2->dev)
continue;
if (memcmp(du->pvid, du2->pvid, ID_LEN))
continue;
/*
* du2 is correctly matched to a dev using this pvid,
* so drop the pvid from du.
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
* TODO: it would make sense to clear IDNAME, but
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
* can we handle entries with no IDNAME?
*/
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
log_debug("Validate %s %s PVID %s: no device found, remove incorrect PVID",
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
free(du->pvid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
free(du->devname);
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
du->pvid = NULL;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->devname = NULL;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
break;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
}
/*
* devs that were wrongly matched to a du and are not being
* used in another correct du should be dropped.
*/
dm_list_iterate_items(devl, &wrong_devs) {
if (!get_du_for_dev(cmd, devl->dev)) {
log_debug("Drop incorrectly matched %s", dev_name(devl->dev));
cmd->filter->wipe(cmd, cmd->filter, devl->dev, NULL);
lvmcache_del_dev(devl->dev);
}
}
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
/*
* When dev names change and a PVID is found on a new device, there
* could be an another devname entry with the same device name but a
* blank PVID, which we remove here.
*/
dm_list_iterate_items(du, &cmd->use_devices) {
if (du->idtype != DEV_ID_TYPE_DEVNAME)
continue;
if (!du->idname)
continue;
if (!du->pvid)
continue;
if (!du->dev)
continue;
dm_list_iterate_items(du2, &cmd->use_devices) {
if (du == du2)
continue;
if (du2->idtype != DEV_ID_TYPE_DEVNAME)
continue;
if (!du2->idname)
continue;
if (strcmp(du->idname, du2->idname))
continue;
if (!du2->pvid) {
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
log_debug("Validate %s %s PVID none: remove entry with repeated devname",
idtype_to_str(du2->idtype), du2->idname ?: ".");
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
dm_list_del(&du2->list);
free_du(du2);
update_file = 1;
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
cmd->device_ids_invalid = 1;
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
}
break;
}
}
device_id: refresh devname idnames if any are not found Search for a PV on other devices if it's a devname entry and the name doesn't exist on the system. This restores code that should not have been removed in commit 1901a47df "device_id: fix conditions for device_ids_refresh"
2023-10-10 19:44:31 +03:00
/*
* Set invalid if an entry using IDNAME=devname has not
* been matched to a device. It's possible that the device
* with the PVID has a new name, different from the IDNAME
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
* value. device_ids_search needs to search system devs
device_id: refresh devname idnames if any are not found Search for a PV on other devices if it's a devname entry and the name doesn't exist on the system. This restores code that should not have been removed in commit 1901a47df "device_id: fix conditions for device_ids_refresh"
2023-10-10 19:44:31 +03:00
* for the PVID. The same applies when the IDNAME field
* has no value.
*/
dm_list_iterate_items(du, &cmd->use_devices) {
if (cmd->device_ids_invalid)
break;
device_id: no idname should be NULL not empty string One place was setting idname to "" instead of NULL when there was no idname value.
2023-10-18 00:49:30 +03:00
/* FIXME: we shouldn't be setting idname to '.' so that check should be unnecessary */
device_id: refresh devname idnames if any are not found Search for a PV on other devices if it's a devname entry and the name doesn't exist on the system. This restores code that should not have been removed in commit 1901a47df "device_id: fix conditions for device_ids_refresh"
2023-10-10 19:44:31 +03:00
if (!du->idname || (du->idname[0] == '.')) {
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Validate %s %s PVID %s: no idname, set invalid.",
device_id: refresh devname idnames if any are not found Search for a PV on other devices if it's a devname entry and the name doesn't exist on the system. This restores code that should not have been removed in commit 1901a47df "device_id: fix conditions for device_ids_refresh"
2023-10-10 19:44:31 +03:00
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
cmd->device_ids_invalid = 1;
}
if ((du->idtype == DEV_ID_TYPE_DEVNAME) && !du->dev && du->pvid) {
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Validate %s %s PVID %s: no device for idtype devname, set invalid.",
device_id: refresh devname idnames if any are not found Search for a PV on other devices if it's a devname entry and the name doesn't exist on the system. This restores code that should not have been removed in commit 1901a47df "device_id: fix conditions for device_ids_refresh"
2023-10-10 19:44:31 +03:00
idtype_to_str(du->idtype), du->idname ?: ".", du->pvid ?: ".");
cmd->device_ids_invalid = 1;
}
}
device_id: searched_devnames improvements Remove the searched_devnames file in a couple more places: . When hints need refreshing it's possible that a missing devices file entry could be found by searching devices again. . When a devices file entry devname is first found to be incorrect, a new search for missing entries may be useful.
2021-11-16 20:26:41 +03:00
/*
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
* When info in the devices file has become incorrect,
* try another search for PVIDs on renamed devices.
device_id: searched_devnames improvements Remove the searched_devnames file in a couple more places: . When hints need refreshing it's possible that a missing devices file entry could be found by searching devices again. . When a devices file entry devname is first found to be incorrect, a new search for missing entries may be useful.
2021-11-16 20:26:41 +03:00
*/
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
if (update_file)
device_id: searched_devnames improvements Remove the searched_devnames file in a couple more places: . When hints need refreshing it's possible that a missing devices file entry could be found by searching devices again. . When a devices file entry devname is first found to be incorrect, a new search for missing entries may be useful.
2021-11-16 20:26:41 +03:00
unlink_searched_devnames(cmd);
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
if (update_file && update_needed)
*update_needed = 1;
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
/* FIXME: for wrong devname cases, wait to write new until device_ids_search? */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
* If an update is needed and allowed, then try lock and
* device_ids_write(). The update is not required and will be done by a
* subsequent command if it's not done here.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
devices file: back up each version Create backup copies of system.devices in /etc/lvm/devices/backup named system.devices-YYYYMMDD.HHMMSS.NNNN. NNNN is the version counter from the file. Each time that an lvm command writes a new system.devices file, it also writes the same file in the backup directory. A new comment line is added to system.devices with HASH=<num> where <num> is a crc calculated from the uncommented lines in system.devices. This lets lvm detect if the file has been modified outside of lvm itself. If system.devices is edited directly, the next time a command reads the file, the crc will not match the HASH value. The command will then rewrite system.devices with the correct HASH value, and create a backup reflecting the edits. A default limit of 50 backup files is kept, configurable by lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-01-31 21:14:02 +03:00
if (update_file) {
if (noupdate)
log_debug("Validated device ids: invalid=%d, update disabled.", cmd->device_ids_invalid);
else {
log_debug("Validated device ids: invalid=%d, trying to update devices file.", cmd->device_ids_invalid);
_device_ids_update_try(cmd);
}
} else if (cmd->devices_file_hash_mismatch) {
/*
* The file was edited externally since lvm last wrote it, so the hash should be
* updated and the file backed up.
*/
if (noupdate)
log_debug("Validated device ids: hash mismatch, update disabled.");
else {
log_debug("Validated device ids: hash mismatch, trying to update devices file.");
_device_ids_update_try(cmd);
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
} else {
device_id: fix conditions for device_ids_refresh Fix commit 847f1dd99cb74 "device_id: rewrite validation of devname entries" which began calling device_ids_refresh() in cases where it was unnecessary, leading to extra PV searches and warnings. Specifically, a command like "lvs <vg>" would use the hints file to scan only devices for the named VG. This means that scanning other PVs would be skipped, and device IDs of those PVs could not be validated because there are no PVID values to verify. This missing info would cause messages about the missing info, and would cause device_ids_refresh to search for the PVs that had been intentionally skipped.
2023-10-05 23:22:32 +03:00
log_debug("Validated device ids: invalid=%d, no update needed.", cmd->device_ids_invalid);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
device_id: fix hints with device ids Fix some interactions between device IDs and hints. Hints may limit the scanned devices which should not always trigger a search for the PVs that were intentionally not scanned. Hints should also be invalidated if they contain a device that's become excluded by an internal filter such as the device_id filter.
2023-10-10 00:08:18 +03:00
/*
* label_scan can use hints to scan only the devs for a specific
* VG as an optimization. If that limited subset of devs were
* all matched properly in the devices file, then override
* device_ids_invalid which may be set due to other entries
* not being matched, which this command doesn't care about.
*/
if (using_hints && scanned_devs) {
int found_scanned = 1;
dm_list_iterate_items(devl, scanned_devs) {
du = get_du_for_dev(cmd, devl->dev);
if (du && !memcmp(du->pvid, devl->dev->pvid, ID_LEN))
continue;
found_scanned = 0;
break;
}
if (found_scanned && cmd->device_ids_invalid) {
log_debug("Override device_ids_invalid for complete hints.");
cmd->device_ids_invalid = 0;
}
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
/*
* Validate entries with suspect sys_serial values. A sys_serial du (devices
* file entry) matched a device with the same serial number, but the PVID did
* not match. Check if multiple devices have the same serial number, and if so
* pair the devs to the du's based on PVID. This requires searching all devs
* for the given serial number, and then reading the PVID from all those devs.
* This may involve reading labels from devs outside the devices file.
* (This could also be done for duplicate wwids if needed.)
*/
void device_ids_check_serial(struct cmd_context *cmd, struct dm_list *scan_devs,
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
int noupdate, int *update_needed)
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
{
struct dm_list dus_check; /* dev_use_list */
struct dm_list devs_check; /* device_list */
struct dm_list prev_devs; /* device_id_list */
struct dev_use_list *dul;
struct device_list *devl, *devl2;
struct device_id_list *dil;
struct device *dev;
struct dev_use *du;
char *tmpdup;
int update_file = 0;
int has_pvid;
int found;
int count;
device_id: check return value of label_read_pvid for covscan
2022-12-01 20:49:51 +03:00
int err;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
dm_list_init(&dus_check);
dm_list_init(&devs_check);
dm_list_init(&prev_devs);
/*
* Create list of du's with a suspect serial number. These du's will
* be rematched to a device using pvid. The device_ids_check_serial
* list was created by device_ids_validate() when it found that the
* PVID on the dev did not match the PVID in the du that was paired
* with the dev.
*/
dm_list_iterate_items(du, &cmd->use_devices) {
device_id: no idname should be NULL not empty string One place was setting idname to "" instead of NULL when there was no idname value.
2023-10-18 00:49:30 +03:00
if (du->dev && du->idname && (du->idtype == DEV_ID_TYPE_SYS_SERIAL) &&
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
str_list_match_item(&cmd->device_ids_check_serial, du->idname)) {
if (!(dul = dm_pool_zalloc(cmd->mem, sizeof(*dul))))
continue;
dul->du = du;
dm_list_add(&dus_check, &dul->list);
}
}
/*
* Create list of devs on the system with suspect serial numbers.
* Read the serial number of each dev in dev cache, and return
* devs that match the suspect serial numbers.
*/
log_debug("Finding all devs with suspect serial numbers.");
_get_devs_with_serial_numbers(cmd, &cmd->device_ids_check_serial, &devs_check);
/*
* Read the PVID from any devs_check entries that have not been scanned
* yet (this is where some devs outside the devices file may be read.)
* If the dev has no PVID or is excluded by filters, then there's no
* point in trying to match it to one of the dus_check entries.
*/
log_debug("Reading and filtering %d devs with suspect serial numbers.", dm_list_size(&devs_check));
dm_list_iterate_items_safe(devl, devl2, &devs_check) {
const char *idname;
if (!(idname = _dev_idname(devl->dev, DEV_ID_TYPE_SYS_SERIAL))) {
log_debug("serial missing for %s", dev_name(devl->dev));
continue;
}
if (devl->dev->flags & DEV_SCAN_FOUND_LABEL) {
log_debug("serial %s pvid %s %s", idname, devl->dev->pvid, dev_name(devl->dev));
continue;
}
if (devl->dev->flags & DEV_SCAN_FOUND_NOLABEL) {
log_debug("serial %s nolabel %s", idname, dev_name(devl->dev));
continue;
}
dev = devl->dev;
has_pvid = 0;
device_id: check return value of label_read_pvid for covscan
2022-12-01 20:49:51 +03:00
err = label_read_pvid(dev, &has_pvid);
if (!err || !has_pvid) {
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
log_debug("serial %s no pvid %s", idname, dev_name(devl->dev));
dm_list_del(&devl->list);
continue;
}
/* data-based filters use data read by label_read_pvid */
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "partitioned") ||
!cmd->filter->passes_filter(cmd, cmd->filter, dev, "signature") ||
!cmd->filter->passes_filter(cmd, cmd->filter, dev, "md") ||
!cmd->filter->passes_filter(cmd, cmd->filter, dev, "fwraid")) {
log_debug("serial %s pvid %s filtered %s", idname, devl->dev->pvid, dev_name(devl->dev));
dm_list_del(&devl->list);
}
}
log_debug("Checking %d PVs with suspect serial numbers.", dm_list_size(&devs_check));
/*
* Unpair du's and dev's that were matched using suspect serial numbers
* so that things can be matched again using PVID. If current pairings
* are correct they will just be matched again. Save the previous
* pairings so that we can detect when a wrong pairing was corrected.
*/
dm_list_iterate_items(dul, &dus_check) {
if (!dul->du->dev)
continue;
device_id: fix segfault verifying serial for non-pv The recent change that verifies sys_serial system.devices entries using the PVID did not exclude non-PV devices from being checked. The verification code would attempt to use du->pvid which was null for the non-PVs causing a segfault.
2022-12-02 20:59:09 +03:00
if (!dul->du->pvid)
continue;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
/* save previously matched devs so they can be dropped from
lvmcache at the end if they are no longer used */
if (!(dil = dm_pool_zalloc(cmd->mem, sizeof(*dil))))
continue;
du = dul->du;
dil->dev = du->dev;
memcpy(dil->pvid, du->pvid, ID_LEN);
dm_list_add(&prev_devs, &dil->list);
du->dev->flags &= ~DEV_MATCHED_USE_ID;
du->dev = NULL;
}
/*
* Match du to a dev based on PVID.
*/
dm_list_iterate_items(dul, &dus_check) {
device_id: fix handling of non-PV with duplicate serial number Fix in the code that matches devices to system.devices entries when the devices have the same serial number. A non-PV device in system.devices has no pvid value, and the code was segfaulting when checking the null pvid value.
2023-06-08 20:24:05 +03:00
if (!dul->du->pvid)
continue;
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
log_debug("Matching suspect serial device id %s PVID %s prev %s",
dul->du->idname, dul->du->pvid, dul->du->devname);
found = 0;
dm_list_iterate_items(devl, &devs_check) {
if (!memcmp(dul->du->pvid, devl->dev->pvid, ID_LEN)) {
/* pair dev and du */
du = dul->du;
dev = devl->dev;
du->dev = dev;
dev->flags |= DEV_MATCHED_USE_ID;
log_debug("Match suspect serial device id %s PVID %s to %s",
du->idname, du->pvid, dev_name(dev));
/* update file if this dev pairing is new or different */
devices: factor common list functions which were duplicated in various places
2022-11-07 20:38:46 +03:00
if (!(dil = device_id_list_find_dev(&prev_devs, dev)))
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
update_file = 1;
else if (memcmp(dil->pvid, du->pvid, ID_LEN))
update_file = 1;
found = 1;
break;
}
}
if (!found)
log_debug("Match PVID failed in %d devs checked.", dm_list_size(&devs_check));
}
/*
* Handle du's with suspect serial numbers that did not have a match
* based on PVID in the previous loop. If the du matches a device
* based on the serial number, and there is only one instance of that
* serial number on the system, then assume that the PVID in the
* devices file is outdated and pair the du and dev, and update the
* PVID in the devices file. (This is what's done for du and dev with
* matching wwid but unmatching PVID.)
*/
dm_list_iterate_items(dul, &dus_check) {
du = dul->du;
/* matched in previous loop using pvid */
if (du->dev)
continue;
log_debug("Matching suspect serial device id %s unmatched PVID %s prev %s",
du->idname, du->pvid, du->devname);
dev = NULL;
count = 0;
/* count the number of devs using this serial number */
dm_list_iterate_items(devl, &devs_check) {
if (_dev_has_id(devl->dev, DEV_ID_TYPE_SYS_SERIAL, du->idname)) {
dev = devl->dev;
count++;
}
if (count > 1)
break;
}
if (count != 1) {
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("No device matches devices file PVID %s with duplicate serial number %s previously %s.",
du->pvid, du->idname, du->devname);
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
continue;
}
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Device %s with serial number %s has PVID %s (devices file %s)",
dev_name(dev), du->idname, dev->pvid, du->pvid ?: "none");
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
if (!(tmpdup = strdup_pvid(dev->pvid)))
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
continue;
free(du->pvid);
du->pvid = tmpdup;
du->dev = dev;
dev->flags |= DEV_MATCHED_USE_ID;
update_file = 1;
}
/*
* label_scan() was done based on the original du/dev matches, so if
* there were some changes made to the du/dev matches above, then we
* may need to correct the results of the label_scan:
*
* . if some devices were scanned in label_scan, but those devs are no
* longer matched to any du, then we need to clear the scanned info
* from those devs from lvmcache.
*
* . if some devices were not scanned in label_scan, but those devs are
* now matched to a du, then we need to run label_scan on those devs to
* populate lvmcache with info from them (the caller does this.)
*/
/*
* Find devs that were previously matched to a du but now are not.
* Clear the filter state and lvmcache info for them.
*/
dm_list_iterate_items(dil, &prev_devs) {
if (!get_du_for_dev(cmd, dil->dev)) {
log_debug("Drop incorrectly matched serial %s", dev_name(dil->dev));
cmd->filter->wipe(cmd, cmd->filter, dil->dev, NULL);
lvmcache_del_dev(dil->dev);
}
}
/*
* Find devs that are now matched to a du but were not previously
* scanned by label_scan (DEV_SCAN_FOUND_LABEL). The caller will
* call label_scan on the devs returned in the list.
*/
dm_list_iterate_items(dul, &dus_check) {
if (!(dev = dul->du->dev))
continue;
if (!(dev->flags & DEV_SCAN_FOUND_LABEL)) {
if (!(devl = dm_pool_zalloc(cmd->mem, sizeof(*devl))))
continue;
devl->dev = dev;
dm_list_add(scan_devs, &devl->list);
}
}
/*
* Look for dus_check entries that were originally matched to a dev
* but now are not. Warn about these like device_ids_match() would.
*/
dm_list_iterate_items(dul, &dus_check) {
if (!dul->du->dev) {
du = dul->du;
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Devices file %s %s PVID %s not found.",
idtype_to_str(du->idtype),
du->idname ?: "none",
du->pvid ?: "none");
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
if (du->devname) {
free(du->devname);
du->devname = NULL;
update_file = 1;
}
}
}
if (update_file && update_needed)
*update_needed = 1;
if (update_file && !noupdate)
_device_ids_update_try(cmd);
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Devices with IDNAME=devname that are mistakenly included by filter-deviceid
* due to a devname change are fully scanned and added to lvmcache.
* device_ids_validate() catches this by seeing that the pvid on the device
* doesn't match what's in the devices file, and then excludes the dev, and
* drops the lvmcache info for the dev. It would be nicer to catch the issue
* earlier, before the dev is fully scanned (and populated in lvmcache). This
* could be done by checking the devices file for the pvid right after the dev
* header is read and before scanning more metadata. label_scan could read the
* pvid from the pv_header and check it prior to calling _text_read().
* Currently it's _text_read() that first gets the pvid from the dev, and
* passes it to lvmcache_add() which sets it in dev->pvid.
*
* This function searches devs for missing PVIDs, and for those found
* updates the du structs (devices file entries) and writes an updated
* devices file.
*
* TODO: should we disable find_renamed_devs entirely when the command
* is using a non-system devices file?
*/
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
void device_ids_search(struct cmd_context *cmd, struct dm_list *new_devs,
int all_ids, int noupdate, int *update_needed)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
{
struct device *dev;
struct dev_use *du;
struct dev_id *id;
struct dev_iter *iter;
struct device_list *devl; /* holds struct device */
struct device_id_list *dil, *dil2; /* holds struct device + pvid */
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
struct dm_list search_pvids; /* list of device_id_list */
struct dm_list search_devs; /* list of device_list */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
const char *devname;
int update_file = 0;
int found = 0;
int not_found = 0;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
int search_mode_none;
int search_mode_auto;
int search_mode_all;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
int search_pvids_count = 0;
int search_devs_count = 0;
uint32_t search_pvids_hash = INITIAL_CRC;
uint32_t search_devs_hash = INITIAL_CRC;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_init(&search_pvids);
dm_list_init(&search_devs);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!cmd->enable_devices_file)
return;
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
/*
* When the product_uuid/hostname change (refresh_trigger is set), or
* when --refresh is included with lvmdevices --check|--update (all_ids
* is set), this function expands from correcting renamed IDTYPE=devname
* entries to looking for missing PVIDs with any IDTYPE, and assigning new
* IDTYPE/IDNAME values for a PVID entry if it's found elsewhere.
* (e.g. a PVID that has moved to a device with a new wwid.) We require
* the --refresh option with update|check because otherwise a PVID may
* be picked up from an old cloned/snapshotted device, and lvm would
* begin using that old clone rather than the actual PV.
*
* Note: refresh_trigger=1 means that product_uuid/hostname has changed,
* which means that the devices file should be updated with that new
* value, even if no device ids need updates themselves.
* With --refresh (all_ids=1), an update may not be needed at all.
*/
if (cmd->device_ids_refresh_trigger || all_ids) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
search_mode_all = 1;
search_mode_none = 0;
search_mode_auto = 0;
} else {
search_mode_all = !strcmp(cmd->search_for_devnames, "all");
search_mode_none = !strcmp(cmd->search_for_devnames, "none");
search_mode_auto = !strcmp(cmd->search_for_devnames, "auto");
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
/*
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
* Create search_pvids which is a list of PVIDs that
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
* we want to locate on some device.
*/
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dm_list_iterate_items(du, &cmd->use_devices) {
device_id: rewrite validation of devname entries The old approach was too complicated and didn't work correctly in some cases.
2023-08-04 00:20:43 +03:00
if (!du->pvid)
continue;
if (du->dev)
device_id: fix search on filtered device When devnames are used as device ids and devnames change, then new devices need to be located for the PVs. If the old devname is now used by a filtered device, this was preventing the code from searching for the new device, so the PV was reported as missing.
2021-11-16 18:29:24 +03:00
continue;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
/*
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
* When device_ids_refresh_trigger/all_ids is set, it means
* that a PVID may be relocated to a new device, even when the
* entry and/or device have a stable id type, like wwid.
* Ordinarily, we assume that only entries using the devname
* id type will need to be located on new devices.
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
*/
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
if (!cmd->device_ids_refresh_trigger && !all_ids &&
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
(du->idtype != DEV_ID_TYPE_DEVNAME))
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
log_debug("Search for PVID %s.", du->pvid);
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (search_mode_none)
continue;
if (!(dil = dm_pool_zalloc(cmd->mem, sizeof(*dil))))
continue;
memcpy(dil->pvid, du->pvid, ID_LEN);
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_add(&search_pvids, &dil->list);
search_pvids_count++;
device_id: ensure pvid buffers are ID_LEN+1 A pvid string read from system.devices could be less then ID_LEN since system.devices fields can be edited. Ensure the pvid buffer is ID_LEN+1 even if the string read from the file is shorter.
2023-11-08 20:46:38 +03:00
search_pvids_hash = calc_crc(search_pvids_hash, (const uint8_t *)du->pvid, ID_LEN);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
/* No unmatched PVIDs to search for, and no system id to update. */
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
if (dm_list_empty(&search_pvids) && !cmd->device_ids_refresh_trigger)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return;
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
log_debug("Search for PVIDs %d trigger %d all_ids %d search all %d auto %d none %d",
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_size(&search_pvids), cmd->device_ids_refresh_trigger, all_ids,
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
search_mode_all, search_mode_auto, search_mode_none);
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
if (dm_list_empty(&search_pvids) && cmd->device_ids_refresh_trigger) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
update_file = 1;
goto out;
}
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Now we want to look at devs on the system that were previously
* rejected by filter-deviceid (based on a devname device id) to check
* if the missing PVID is on a device with a new name.
*/
log_debug("Search for PVIDs filtering.");
/*
* Initial list of devs to search, eliminating any that have already
* been matched, or don't pass filters that do not read dev. We do not
* want to modify the command's existing filter chain (the persistent
* filter), in the process of doing this search outside the deviceid
* filter.
*/
if (!(iter = dev_iter_create(NULL, 0)))
return;
while ((dev = dev_iter_get(cmd, iter))) {
if (dev->flags & DEV_MATCHED_USE_ID)
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "sysfs"))
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "type"))
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "usable"))
continue;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "mpath"))
continue;
if (!(devl = dm_pool_zalloc(cmd->mem, sizeof(*devl))))
continue;
devl->dev = dev;
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_add(&search_devs, &devl->list);
search_devs_count++;
search_devs_hash = calc_crc(search_devs_hash, (const uint8_t *)&devl->dev->dev, sizeof(dev_t));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
dev_iter_destroy(iter);
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
/*
* A previous command searched for devnames and found nothing, so it
* created the searched file to tell us not to bother. Without this, a
* device that's permanently detached (and identified by devname) would
* cause every command to search for it. If the detached device is
* later attached, it will generate a pvscan, and pvscan will unlink
* the searched file, so a subsequent lvm command will do the search
* again. In future perhaps we could add a policy to automatically
* remove a devices file entry that's not been found for some time.
*/
if (!cmd->device_ids_refresh_trigger && !all_ids &&
_searched_devnames_exists(cmd, search_pvids_count, search_pvids_hash,
search_devs_count, search_devs_hash)) {
log_debug("Search for PVIDs skipped for matching %s", _searched_file);
return;
}
log_debug("Search for PVIDs reading labels.");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Read the dev to get the pvid, and run the filters that will use the
* data that has been read to get the pvid. Like above, we do not want
* to modify the command's existing filter chain or the persistent
* filter values.
*/
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_iterate_items(devl, &search_devs) {
label_read_pvid: separate error and no-pvid error reading dev and no pvid on dev were both returning 0. make it easier for callers to know which, if they care. return 1 if the device could be read, regardless of whether a pvid was found or not. set has_pvid=1 if a pvid is found and 0 if no pvid is found.
2021-04-24 01:32:37 +03:00
int has_pvid;
gcc: correct signess comparation Compare int to int and unsigned to unsigned...
2023-07-13 13:32:44 +03:00
dev = devl->dev;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
* As an optimization for locating new devs for IDTYPE=devname
* entries, we can just check devs that would also use
* ID_TYPE_DEVNAME themselves. i.e. a ID_TYPE_DEVNAME entry
* would not appear on a device that has a wwid. So, if a
* dev in search_list_devs has a proper/stable device id
* (e.g. wwid, serial, loop, mpath), then we don't need to
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* read it to check for missing PVIDs.
*
* search_for_devnames="all" means we should search every
* device, so we skip this optimization.
*
* TODO: in auto mode should we look in other non-system
* devices files and skip any devs included in those?
device_id: fix search for renamed device when the wwid is ignored When a device has a wwid (from sysfs), but lvm ignores the wwid, e.g. because it contains an unreliable "QEMU" value, then lvm falls back to using IDTYPE=devname (the device name) as the device id. If the device name changes after reboot, then lvm automatically searches for the PV on other devices to find the new device name and correct system.devices. When searching for the PV, lvm skips looking at devices that would use other id types, e.g. if a device would use a wwid and not a devname, then it skips checking it. However, it failed to account for the fact that a device may have wwid that was ignored, in which case it should be checked.
2022-01-25 19:47:50 +03:00
*
* Note that a user can override a stable id type and use
* devname for a device's id, in which case this optimization
* can prevent a search from finding a renamed dev. So, if a
* user forces a devname id, then they should probably also
* set search_for_devnames=all.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (search_mode_auto && _dev_has_stable_id(cmd, dev)) {
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Search for PVIDs skip %s (stable id)", dev_name(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
}
device_id: first match non-devname device ids Incorrectly matching a dev to a devname id (due to changing devnames) before matching the dev to a proper device id, can result in the dev not being matched to the real id.
2023-10-17 21:54:31 +03:00
log_debug("Search for PVIDs on %s", dev_name(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Reads 4K from the start of the disk.
label_read_pvid: separate error and no-pvid error reading dev and no pvid on dev were both returning 0. make it easier for callers to know which, if they care. return 1 if the device could be read, regardless of whether a pvid was found or not. set has_pvid=1 if a pvid is found and 0 if no pvid is found.
2021-04-24 01:32:37 +03:00
* Returns 0 if the dev cannot be read.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* Looks for LVM header, and sets dev->pvid if the device is a PV.
label_read_pvid: separate error and no-pvid error reading dev and no pvid on dev were both returning 0. make it easier for callers to know which, if they care. return 1 if the device could be read, regardless of whether a pvid was found or not. set has_pvid=1 if a pvid is found and 0 if no pvid is found.
2021-04-24 01:32:37 +03:00
* Sets has_pvid=1 if the dev has an lvm PVID.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* This loop may look at and skip many non-LVM devices.
*/
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
if (!label_read_pvid(dev, &has_pvid))
label_read_pvid: separate error and no-pvid error reading dev and no pvid on dev were both returning 0. make it easier for callers to know which, if they care. return 1 if the device could be read, regardless of whether a pvid was found or not. set has_pvid=1 if a pvid is found and 0 if no pvid is found.
2021-04-24 01:32:37 +03:00
continue;
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
if (!has_pvid)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
continue;
/*
* These filters will use the block of data from bcache that
* was read label_read_pvid(), and may read other
* data blocks beyond that.
*/
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "partitioned"))
goto next;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "signature"))
goto next;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "md"))
goto next;
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, "fwraid"))
goto next;
/*
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
* Check if the the PVID returned from label_read is one we are looking for.
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
* The loop below looks at search_pvids entries that have dil->dev set.
* This loop continues checking after all search_pvids entries have been
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* matched in order to check if the PVID is on duplicate devs.
*/
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_iterate_items_safe(dil, dil2, &search_pvids) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!memcmp(dil->pvid, dev->pvid, ID_LEN)) {
if (dil->dev) {
log_warn("WARNING: found PVID %s on multiple devices %s %s.",
dil->pvid, dev_name(dil->dev), dev_name(dev));
log_warn("WARNING: duplicate PVIDs should be changed to be unique.");
log_warn("WARNING: use lvmdevices to select a device for PVID %s.", dil->pvid);
dm_list_del(&dil->list);
} else {
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
log_debug("Search for PVID %s found on %s.", dil->pvid, dev_name(dev));
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dil->dev = dev;
}
}
}
next:
label_scan_invalidate(dev);
}
/*
* The use_devices entries (repesenting the devices file) are
* updated for the new devices on which the PVs reside. The new
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
* correct devs are set as dil->dev on search_pvids entries.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*
* The du/dev/id are set up and linked for the new devs.
*
* The command's full filter chain is updated for the new devs now that
* filter-deviceid will pass.
*/
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_iterate_items(dil, &search_pvids) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
char *new_idname, *new_idname2, *new_devname;
uint16_t new_idtype;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
devices: fix dev_name assumptions dev_name(dev) returns "[unknown]" if there are no names on dev->aliases. It's meant mainly for log messages. Many places assume a valid path name is returned, and use it directly. A caller that wants to use the path from dev_name() must first check if the dev has any paths with dm_list_empty(&dev->aliases).
2022-02-23 00:03:11 +03:00
if (!dil->dev || dm_list_empty(&dil->dev->aliases)) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
not_found++;
continue;
}
dev = dil->dev;
devname = dev_name(dev);
devices: fix dev_name assumptions dev_name(dev) returns "[unknown]" if there are no names on dev->aliases. It's meant mainly for log messages. Many places assume a valid path name is returned, and use it directly. A caller that wants to use the path from dev_name() must first check if the dev has any paths with dm_list_empty(&dev->aliases).
2022-02-23 00:03:11 +03:00
found++;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!(du = get_du_for_pvid(cmd, dil->pvid))) {
/* shouldn't happen */
continue;
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
new_idtype = 0;
new_idname = NULL;
new_idname2 = NULL;
new_devname = NULL;
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
if (cmd->device_ids_refresh_trigger || all_ids) {
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (!device_id_system_read_preferred(cmd, dev, &new_idtype, (const char **)&new_idname))
continue;
new_idname2 = strdup(new_idname);
new_devname = strdup(devname);
log_print_unless_silent("Devices file PVID %s has new device ID %s %s from %s.",
du->pvid ?: "", idtype_to_str(new_idtype), new_idname ?: "", devname);
} else {
/* Use the new device name as the new idname. */
new_idtype = DEV_ID_TYPE_DEVNAME;
new_idname = strdup(devname);
new_idname2 = strdup(devname);
new_devname = strdup(devname);
device_id: reduce messages Don't print messages about devices file entries that are missing or are being updated.
2023-10-25 00:39:15 +03:00
log_debug("Found new device name %s for PVID %s.", devname, du->pvid ?: "");
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
id = zalloc(sizeof(struct dev_id));
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
if (!id || !new_devname || !new_idname || !new_idname2) {
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(id);
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
free(new_idname);
free(new_idname2);
free(new_devname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
stack;
continue;
}
cleanup: free already checks for NULL
2021-02-27 16:14:25 +03:00
free(du->idname);
free(du->devname);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
free_dids(&dev->ids);
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
du->idtype = new_idtype;
du->idname = new_idname;
du->devname = new_devname;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
du->dev = dev;
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
id->idtype = new_idtype;
id->idname = new_idname2;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev->id = id;
dev->flags |= DEV_MATCHED_USE_ID;
dm_list_add(&dev->ids, &id->list);
dev_get_partition_number(dev, &du->part);
update_file = 1;
}
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_iterate_items(dil, &search_pvids) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!dil->dev)
continue;
dev = dil->dev;
cmd->filter->wipe(cmd, cmd->filter, dev, NULL);
if (!cmd->filter->passes_filter(cmd, cmd->filter, dev, NULL)) {
/* I don't think this would happen */
change messages about filtered devices Change messages that refer to devices being "excluded by filters" to say just "excluded". This will avoid mistaking the word "filters" with the lvm.conf filter setting.
2022-03-31 19:38:08 +03:00
log_warn("WARNING: new device %s for PVID %s is excluded: %s.",
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev_name(dev), dil->pvid, dev_filtered_reason(dev));
gcc-fanalyzer: notices 'du' could be NULL Ensure only nonNULL 'du' pointer is dereference altough the comment to the last assign 'du' pointer already suggest 'NULL' case should not happen. So just being explicit. mer du
2021-09-18 00:51:12 +03:00
if (du) /* Should not happen 'du' is NULL */
du->dev = NULL;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
dev->flags &= ~DEV_MATCHED_USE_ID;
}
}
devices: refresh device ids if the system changes If the system changes, locate PVs that appear on different devices, and update the device IDs in the devices file. A system change is detected by saving the DMI product_uuid or hostname in the devices file, and comparing it to the current system value. If a root PV is restored or copied to a new system with different devices, then the product_uuid or hostname should change, and trigger lvm to locate PVIDs from system.devices on new devices.
2023-09-13 20:28:47 +03:00
out:
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
* try lock and device_ids_write(), the update is not required and will
* be done by a subsequent command if it's not done here.
*
* This command could have already done an earlier device_ids_update_try
* (successfully or not) in device_ids_validate().
*/
if (update_file && noupdate) {
log_debug("Search for PVIDs update disabled");
} else if (update_file) {
log_debug("Search for PVIDs updating devices file");
_device_ids_update_try(cmd);
} else {
log_debug("Search for PVIDs found no updates");
}
device_id: improve validate debug messages Make the device_ids_validate messages consistent. Consistently use "noupdate" and "update_needed" args.
2023-10-28 01:13:25 +03:00
if (update_file && update_needed)
*update_needed = 1;
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
/*
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
* The entries in search_pvids with a dev set are the new devs found
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
* for the PVIDs that we want to return to the caller in a device_list
* format.
*/
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
dm_list_iterate_items(dil, &search_pvids) {
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (!dil->dev)
continue;
dev = dil->dev;
if (!(devl = dm_pool_zalloc(cmd->mem, sizeof(*devl))))
continue;
devl->dev = dev;
lvmdevices: new output and options for check and update - add new comparison between old and new entries, and use this as the basis for new dedicated output for check and update - add new --refresh option to search for missing PVIDs on all devices, and possibly update the device ID - internally, only use the term "refresh" for cases where a new device ID may be found and assigned for a missing PVID
2023-10-28 01:39:32 +03:00
dm_list_add(new_devs, &devl->list);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
/*
* Prevent more devname searches by subsequent commands, in case the
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
* pvids not found were from devices that are permanently detached. If
* a new PV appears, pvscan will run and do unlink_searched_file.
* Also, if the hints code detects that the hints file becomes invalid
* due to new system devs, then searched_devnames is also unlinked.
* So, the searched_devnames temp file should not prevent a missing
* device from being found if it's attached later.
*
* Any lvmdevices command removes searched_devnames temp file prior to
* running, and don't create the temp file from any lvmdevices command;
* this is not among the commands we want to optimize.
*
* Note: the searched_devnames temp file only suppresses searches for
* missing PVIDs with IDTYPE=devname that may have a new device name.
* It does not suppress searches for missing PVIDs when done for
* refresh, where PVIDs of any idtype are searched for.
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
*/
device_id: improve searched_devnames temp file Include info in the temp file to confirm that it should be used. The temp file is meant to suppress repeated, identical searches for the same PVIDs on the same set of devices. Write to the file a count and hash of the missing PVIDs and a count and hash of the devices to search. A subsequent command will ignore and remove the temp file if any of these values differ. We don't want to suppress a search if a change has occured, and a missing PV could be found by scanning devices.
2023-11-02 22:54:31 +03:00
if (!cmd->device_ids_refresh_trigger && !all_ids && not_found && !found &&
strcmp(cmd->name, "lvmdevices"))
_searched_devnames_create(cmd, search_pvids_count, search_pvids_hash,
search_devs_count, search_devs_hash);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
int devices_file_touch(struct cmd_context *cmd)
{
struct stat buf;
char dirpath[PATH_MAX];
int fd;
if (dm_snprintf(dirpath, sizeof(dirpath), "%s/devices", cmd->system_dir) < 0) {
log_error("Failed to copy devices dir path");
return 0;
}
if (stat(dirpath, &buf)) {
log_error("Cannot create devices file, missing devices directory %s.", dirpath);
return 0;
}
fd = open(cmd->devices_file_path, O_CREAT, S_IRUSR | S_IWUSR);
if (fd < 0) {
log_debug("Failed to create %s %d", cmd->devices_file_path, errno);
return 0;
}
if (close(fd))
stack;
return 1;
}
int devices_file_exists(struct cmd_context *cmd)
{
struct stat buf;
if (!cmd->devices_file_path[0])
return 0;
if (stat(cmd->devices_file_path, &buf))
return 0;
return 1;
}
/*
* If a command also uses the global lock, the global lock
* is acquired first, then the devices file is locked.
*
* There are three categories of commands in terms of
* reading/writing the devices file:
*
* 1. Commands that we know intend to modify the file,
* lvmdevices --add|--del, vgimportdevices,
* pvcreate/vgcreate/vgextend, pvchange --uuid,
* vgimportclone.
*
* 2. Most other commands that do not modify the file.
*
* 3. Commands from 2 that find something to correct in
* the devices file during device_ids_validate().
* These corrections are not essential and can be
* skipped, they will just be done by a subsequent
* command if they are not done.
*
* Locking for each case:
*
* 1. lock ex, read file, write file, unlock
*
* (In general, the command sets edit_devices_file or
* create_edit_devices_file, then setup_devices() is called,
* maybe directly, or by way of calling the traditional
* process_each->label_scan->setup_devices. setup_devices
* sees {create}_edit_devices_file which causes it to do
* lock_devices_file(EX) before creating/reading the file.)
*
* 2. lock sh, read file, unlock, (validate ok)
*
* 3. lock sh, read file, unlock, validate wants update,
* lock ex (nonblocking - skip update if fails),
* read file, check file is unchanged from prior read,
* write file, unlock
*/
static int _lock_devices_file(struct cmd_context *cmd, int mode, int nonblock, int *held)
{
const char *lock_dir;
const char *filename;
int fd;
int op = mode;
int ret;
if (!cmd->enable_devices_file || cmd->nolocking)
return 1;
_using_devices_file = 1;
if (_devices_file_locked == mode) {
/* can happen when a command holds an ex lock and does an update in device_ids_validate */
vgimportdevices: fix locking when creating devices file Take the devices file lock before creating a new devices file. (Was missed by the change to preemptively create the devices file prior to setup_devices(), which was done to improve the error path.)
2022-08-30 22:40:48 +03:00
/* can happen when vgimportdevices calls this directly, followed later by setup_devices */
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
if (held)
*held = 1;
return 1;
}
if (_devices_file_locked) {
/* shouldn't happen */
log_warn("WARNING: devices file already locked %d", mode);
return 0;
}
if (!(lock_dir = find_config_tree_str(cmd, global_locking_dir_CFG, NULL)))
return_0;
if (!(filename = cmd->devicesfile ?: find_config_tree_str(cmd, devices_devicesfile_CFG, NULL)))
return_0;
if (dm_snprintf(_devices_lockfile, sizeof(_devices_lockfile), "%s/D_%s", lock_dir, filename) < 0)
return_0;
if (nonblock)
op |= LOCK_NB;
if (_devices_fd != -1) {
/* shouldn't happen */
log_warn("WARNING: devices file lock file already open %d", _devices_fd);
return 0;
}
fd = open(_devices_lockfile, O_CREAT|O_RDWR, S_IRUSR | S_IWUSR);
if (fd < 0) {
log_debug("lock_devices_file open errno %d", errno);
devices: apply ignorelockingfailure to devices file lock
2021-08-19 20:57:31 +03:00
if (cmd->sysinit || cmd->ignorelockingfailure)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
return 0;
}
ret = flock(fd, op);
if (!ret) {
_devices_fd = fd;
_devices_file_locked = mode;
return 1;
}
log_debug("lock_devices_file flock errno %d", errno);
if (close(fd))
stack;
devices: apply ignorelockingfailure to devices file lock
2021-08-19 20:57:31 +03:00
if (cmd->sysinit || cmd->ignorelockingfailure)
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
return 1;
return 0;
}
int lock_devices_file(struct cmd_context *cmd, int mode)
{
return _lock_devices_file(cmd, mode, 0, NULL);
}
int lock_devices_file_try(struct cmd_context *cmd, int mode, int *held)
{
return _lock_devices_file(cmd, mode, 1, held);
}
void unlock_devices_file(struct cmd_context *cmd)
{
int ret;
if (!cmd->enable_devices_file || cmd->nolocking || !_using_devices_file)
return;
if (!_devices_file_locked && cmd->sysinit)
return;
if (_devices_fd == -1) {
/* shouldn't happen */
log_warn("WARNING: devices file unlock no fd");
return;
}
if (!_devices_file_locked)
log_warn("WARNING: devices file unlock not locked");
ret = flock(_devices_fd, LOCK_UN);
if (ret)
log_warn("WARNING: devices file unlock errno %d", errno);
_devices_file_locked = 0;
if (close(_devices_fd))
stack;
_devices_fd = -1;
}
void devices_file_init(struct cmd_context *cmd)
{
dm_list_init(&cmd->use_devices);
device_id: handle duplicate serial numbers Handle multiple devices using the same serial number as their device id. After matching devices to devices file entries, if there is a discrepency between the ondisk PVID and the devices file PVID, then rematch devices to devices file entries using PVID, looking at all disks on the system with the same serial number.
2022-11-01 00:14:01 +03:00
dm_list_init(&cmd->device_ids_check_serial);
device usage based on devices file The LVM devices file lists devices that lvm can use. The default file is /etc/lvm/devices/system.devices, and the lvmdevices(8) command is used to add or remove device entries. If the file does not exist, or if lvm.conf includes use_devicesfile=0, then lvm will not use a devices file. When the devices file is in use, the regex filter is not used, and the filter settings in lvm.conf or on the command line are ignored. LVM records devices in the devices file using hardware-specific IDs, such as the WWID, and attempts to use subsystem-specific IDs for virtual device types. These device IDs are also written in the VG metadata. When no hardware or virtual ID is available, lvm falls back using the unstable device name as the device ID. When devnames are used, lvm performs extra scanning to find devices if their devname changes, e.g. after reboot. When proper device IDs are used, an lvm command will not look at devices outside the devices file, but when devnames are used as a fallback, lvm will scan devices outside the devices file to locate PVs on renamed devices. A config setting search_for_devnames can be used to control the scanning for renamed devname entries. Related to the devices file, the new command option --devices <devnames> allows a list of devices to be specified for the command to use, overriding the devices file. The listed devices act as a sort of devices file in terms of limiting which devices lvm will see and use. Devices that are not listed will appear to be missing to the lvm command. Multiple devices files can be kept in /etc/lvm/devices, which allows lvm to be used with different sets of devices, e.g. system devices do not need to be exposed to a specific application, and the application can use lvm on its own set of devices that are not exposed to the system. The option --devicesfile <filename> is used to select the devices file to use with the command. Without the option set, the default system devices file is used. Setting --devicesfile "" causes lvm to not use a devices file. An existing, empty devices file means lvm will see no devices. The new command vgimportdevices adds PVs from a VG to the devices file and updates the VG metadata to include the device IDs. vgimportdevices -a will import all VGs into the system devices file. LVM commands run by dmeventd not use a devices file by default, and will look at all devices on the system. A devices file can be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If this file exists, lvm commands run by dmeventd will use it. Internal implementaion: - device_ids_read - read the devices file . add struct dev_use (du) to cmd->use_devices for each devices file entry - dev_cache_scan - get /dev entries . add struct device (dev) to dev_cache for each device on the system - device_ids_match - match devices file entries to /dev entries . match each du on cmd->use_devices to a dev in dev_cache, using device ID . on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID - label_scan - read lvm headers and metadata from devices . filters are applied, those that do not need data from the device . filter-deviceid skips devs without MATCHED_USE_ID, i.e. skips /dev entries that are not listed in the devices file . read lvm label from dev . filters are applied, those that use data from the device . read lvm metadata from dev . add info/vginfo structs for PVs/VGs (info is "lvmcache") - device_ids_find_renamed_devs - handle devices with unstable devname ID where devname changed . this step only needed when devs do not have proper device IDs, and their dev names change, e.g. after reboot sdb becomes sdc. . detect incorrect match because PVID in the devices file entry does not match the PVID found when the device was read above . undo incorrect match between du and dev above . search system devices for new location of PVID . update devices file with new devnames for PVIDs on renamed devices . label_scan the renamed devs - continue with command processing
2020-06-23 21:25:41 +03:00
}
void devices_file_exit(struct cmd_context *cmd)
{
if (!cmd->enable_devices_file)
return;
free_dus(&cmd->use_devices);
if (_devices_fd == -1)
return;
unlock_devices_file(cmd);
}
Copy Permalink