1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
lvm2/lib/config/config.h

294 lines
14 KiB
C
Raw Normal View History

/*
2004-03-30 23:35:44 +04:00
* Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
* Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
*
2004-03-30 23:35:44 +04:00
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
2004-03-30 23:35:44 +04:00
*
* You should have received a copy of the GNU Lesser General Public License
2004-03-30 23:35:44 +04:00
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
2001-09-25 16:49:28 +04:00
#ifndef _LVM_CONFIG_H
#define _LVM_CONFIG_H
#include "libdevmapper.h"
/* 16 bits: 3 bits for major, 4 bits for minor, 9 bits for patchlevel */
2013-07-25 01:10:37 +04:00
/* FIXME Max LVM version supported: 7.15.511. Extend bits when needed. */
#define vsn(major, minor, patchlevel) (major << 13 | minor << 9 | patchlevel)
2004-05-04 22:28:15 +04:00
struct device;
struct cmd_context;
typedef enum {
CONFIG_UNDEFINED, /* undefined/uninitialized config */
CONFIG_FILE, /* one file config */
CONFIG_MERGED_FILES, /* config that is a result of merging more config files */
CONFIG_STRING, /* config string typed on cmdline using '--config' arg */
config: differentiate command and metadata profiles and consolidate profile handling code - When defining configuration source, the code now uses separate CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers (before, it was just CONFIG_PROFILE that did not make the difference between the two). This helps when checking the configuration if it contains correct set of options which are all in either command-profilable or metadata-profilable group without mixing these groups together - so it's a firm distinction. The "command profile" can't contain "metadata profile" and vice versa! This is strictly checked and if the settings are mixed, such profile is rejected and it's not used. So in the end, the CONFIG_PROFILE_COMMAND set of options and CONFIG_PROFILE_METADATA are mutually exclusive sets. - Marking configuration with one or the other marker will also determine the way these configuration sources are positioned in the configuration cascade which is now: CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES - Marking configuration with one or the other marker will also make it possible to issue a command context refresh (will be probably a part of a future patch) if needed for settings in global profile set. For settings in metadata profile set this is impossible since we can't refresh cmd context in the middle of reading VG/LV metadata and for each VG/LV separately because each VG/LV can have a different metadata profile assinged and it's not possible to change these settings at this level. - When command profile is incorrect, it's rejected *and also* the command exits immediately - the profile *must* be correct for the command that was run with a profile to be executed. Before this patch, when the profile was found incorrect, there was just the warning message and the command continued without profile applied. But it's more correct to exit immediately in this case. - When metadata profile is incorrect, we reject it during command runtime (as we know the profile name from metadata and not early from command line as it is in case of command profiles) and we *do continue* with the command as we're in the middle of operation. Also, the metadata profile is applied directly and on the fly on find_config_tree_* fn call and even if the metadata profile is found incorrect, we still need to return the non-profiled value as found in the other configuration provided or default value. To exit immediately even in this case, we'd need to refactor existing find_config_tree_* fns so they can return error. Currently, these fns return only config values (which end up with default values in the end if the config is not found). - To check the profile validity before use to be sure it's correct, one can use : lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate (the --commandprofile/--metadataprofile for dumpconfig will come as part of the subsequent patch) - This patch also adds a reference to --commandprofile and --metadataprofile in the cmd help string (which was missing before for the --profile for some commands). We do not mention --profile now as people should use --commandprofile or --metadataprofile directly. However, the --profile is still supported for backward compatibility and it's translated as: --profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange (as these commands are able to attach profile to metadata) --profile == --commandprofile for all the other commands (--metadataprofile is not allowed there as it makes no sense) - This patch also contains some cleanups to make the code handling the profiles more readable...
2014-05-20 16:13:10 +04:00
CONFIG_PROFILE_COMMAND, /* command profile config */
CONFIG_PROFILE_METADATA,/* metadata profile config */
CONFIG_FILE_SPECIAL /* special purpose file config (e.g. metadata, persistent filter...) */
} config_source_t;
struct profile {
struct dm_list list;
config: differentiate command and metadata profiles and consolidate profile handling code - When defining configuration source, the code now uses separate CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers (before, it was just CONFIG_PROFILE that did not make the difference between the two). This helps when checking the configuration if it contains correct set of options which are all in either command-profilable or metadata-profilable group without mixing these groups together - so it's a firm distinction. The "command profile" can't contain "metadata profile" and vice versa! This is strictly checked and if the settings are mixed, such profile is rejected and it's not used. So in the end, the CONFIG_PROFILE_COMMAND set of options and CONFIG_PROFILE_METADATA are mutually exclusive sets. - Marking configuration with one or the other marker will also determine the way these configuration sources are positioned in the configuration cascade which is now: CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES - Marking configuration with one or the other marker will also make it possible to issue a command context refresh (will be probably a part of a future patch) if needed for settings in global profile set. For settings in metadata profile set this is impossible since we can't refresh cmd context in the middle of reading VG/LV metadata and for each VG/LV separately because each VG/LV can have a different metadata profile assinged and it's not possible to change these settings at this level. - When command profile is incorrect, it's rejected *and also* the command exits immediately - the profile *must* be correct for the command that was run with a profile to be executed. Before this patch, when the profile was found incorrect, there was just the warning message and the command continued without profile applied. But it's more correct to exit immediately in this case. - When metadata profile is incorrect, we reject it during command runtime (as we know the profile name from metadata and not early from command line as it is in case of command profiles) and we *do continue* with the command as we're in the middle of operation. Also, the metadata profile is applied directly and on the fly on find_config_tree_* fn call and even if the metadata profile is found incorrect, we still need to return the non-profiled value as found in the other configuration provided or default value. To exit immediately even in this case, we'd need to refactor existing find_config_tree_* fns so they can return error. Currently, these fns return only config values (which end up with default values in the end if the config is not found). - To check the profile validity before use to be sure it's correct, one can use : lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate (the --commandprofile/--metadataprofile for dumpconfig will come as part of the subsequent patch) - This patch also adds a reference to --commandprofile and --metadataprofile in the cmd help string (which was missing before for the --profile for some commands). We do not mention --profile now as people should use --commandprofile or --metadataprofile directly. However, the --profile is still supported for backward compatibility and it's translated as: --profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange (as these commands are able to attach profile to metadata) --profile == --commandprofile for all the other commands (--metadataprofile is not allowed there as it makes no sense) - This patch also contains some cleanups to make the code handling the profiles more readable...
2014-05-20 16:13:10 +04:00
config_source_t source; /* either CONFIG_PROFILE_COMMAND or CONFIG_PROFILE_METADATA */
const char *name;
struct dm_config_tree *cft;
};
struct profile_params {
config: differentiate command and metadata profiles and consolidate profile handling code - When defining configuration source, the code now uses separate CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers (before, it was just CONFIG_PROFILE that did not make the difference between the two). This helps when checking the configuration if it contains correct set of options which are all in either command-profilable or metadata-profilable group without mixing these groups together - so it's a firm distinction. The "command profile" can't contain "metadata profile" and vice versa! This is strictly checked and if the settings are mixed, such profile is rejected and it's not used. So in the end, the CONFIG_PROFILE_COMMAND set of options and CONFIG_PROFILE_METADATA are mutually exclusive sets. - Marking configuration with one or the other marker will also determine the way these configuration sources are positioned in the configuration cascade which is now: CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES - Marking configuration with one or the other marker will also make it possible to issue a command context refresh (will be probably a part of a future patch) if needed for settings in global profile set. For settings in metadata profile set this is impossible since we can't refresh cmd context in the middle of reading VG/LV metadata and for each VG/LV separately because each VG/LV can have a different metadata profile assinged and it's not possible to change these settings at this level. - When command profile is incorrect, it's rejected *and also* the command exits immediately - the profile *must* be correct for the command that was run with a profile to be executed. Before this patch, when the profile was found incorrect, there was just the warning message and the command continued without profile applied. But it's more correct to exit immediately in this case. - When metadata profile is incorrect, we reject it during command runtime (as we know the profile name from metadata and not early from command line as it is in case of command profiles) and we *do continue* with the command as we're in the middle of operation. Also, the metadata profile is applied directly and on the fly on find_config_tree_* fn call and even if the metadata profile is found incorrect, we still need to return the non-profiled value as found in the other configuration provided or default value. To exit immediately even in this case, we'd need to refactor existing find_config_tree_* fns so they can return error. Currently, these fns return only config values (which end up with default values in the end if the config is not found). - To check the profile validity before use to be sure it's correct, one can use : lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate (the --commandprofile/--metadataprofile for dumpconfig will come as part of the subsequent patch) - This patch also adds a reference to --commandprofile and --metadataprofile in the cmd help string (which was missing before for the --profile for some commands). We do not mention --profile now as people should use --commandprofile or --metadataprofile directly. However, the --profile is still supported for backward compatibility and it's translated as: --profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange (as these commands are able to attach profile to metadata) --profile == --commandprofile for all the other commands (--metadataprofile is not allowed there as it makes no sense) - This patch also contains some cleanups to make the code handling the profiles more readable...
2014-05-20 16:13:10 +04:00
char dir[PATH_MAX]; /* subdir in LVM_SYSTEM_DIR where LVM looks for profiles */
struct profile *global_command_profile; /* profile (as given by --commandprofile cmd arg) used as global command profile */
struct profile *global_metadata_profile; /* profile (as given by --metadataprofile cmd arg) that overrides any other VG/LV-based profile */
struct dm_list profiles_to_load; /* list of profiles which are only added, but still need to be loaded for any use */
struct dm_list profiles; /* list of profiles which are loaded already and which are ready for use */
};
#define CFG_PATH_MAX_LEN 64
/*
* Structures used for definition of a configuration tree.
*/
/* configuration definition item type (for item's accepted types) */
typedef enum {
CFG_TYPE_SECTION = 1 << 0, /* section */
CFG_TYPE_ARRAY = 1 << 1, /* setting */
CFG_TYPE_BOOL = 1 << 2, /* setting */
CFG_TYPE_INT = 1 << 3, /* setting */
CFG_TYPE_FLOAT = 1 << 4, /* setting */
CFG_TYPE_STRING = 1 << 5, /* setting */
} cfg_def_type_t;
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
/* function types to evaluate default value at runtime */
typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile);
typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile);
typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_UNCONFIGURED) (struct cmd_context *cmd);
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
/* configuration definition item value (for item's default value) */
typedef union {
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
/* static value - returns a variable */
const int v_CFG_TYPE_BOOL, v_CFG_TYPE_INT;
const float v_CFG_TYPE_FLOAT;
const char *v_CFG_TYPE_STRING, *v_CFG_TYPE_ARRAY;
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
/* run-time value - evaluates a function */
t_fn_CFG_TYPE_BOOL fn_CFG_TYPE_BOOL;
t_fn_CFG_TYPE_INT fn_CFG_TYPE_INT;
t_fn_CFG_TYPE_FLOAT fn_CFG_TYPE_FLOAT;
t_fn_CFG_TYPE_STRING fn_CFG_TYPE_STRING;
t_fn_CFG_TYPE_ARRAY fn_CFG_TYPE_ARRAY;
} cfg_def_value_t;
typedef union {
const char *v_UNCONFIGURED;
t_fn_UNCONFIGURED fn_UNCONFIGURED;
} cfg_def_unconfigured_value_t;
/* configuration definition item flags: */
/* whether the configuration item name is variable */
#define CFG_NAME_VARIABLE 0x001
/* whether empty value is allowed */
#define CFG_ALLOW_EMPTY 0x002
/* whether the configuration item is for advanced use only */
#define CFG_ADVANCED 0x004
/* whether the configuration item is not officially supported */
#define CFG_UNSUPPORTED 0x008
/* whether the configuration item is customizable by a profile */
#define CFG_PROFILABLE 0x010
/* whether the configuration item is customizable by a profile */
/* and whether it can be attached to VG/LV metadata at the same time
* The CFG_PROFILABLE_METADATA flag incorporates CFG_PROFILABLE flag!!! */
#define CFG_PROFILABLE_METADATA 0x030
/* whether the default value is undefned */
#define CFG_DEFAULT_UNDEFINED 0x040
/* whether the default value is commented out on output */
#define CFG_DEFAULT_COMMENTED 0x080
/* whether the default value is calculated during run time */
#define CFG_DEFAULT_RUN_TIME 0x100
/* whether the configuration setting is disabled (and hence defaults always used) */
#define CFG_DISABLED 0x200
/* configuration definition item structure */
typedef struct cfg_def_item {
int id; /* ID of this item */
int parent; /* ID of parent item */
const char *name; /* name of the item in configuration tree */
int type; /* configuration item type (bits of cfg_def_type_t) */
cfg_def_value_t default_value; /* default value (only for settings) */
uint16_t flags; /* configuration item definition flags */
uint16_t since_version; /* version this item appeared in */
cfg_def_unconfigured_value_t default_unconfigured_value; /* default value in terms of @FOO@, pre-configured (only for settings) */
uint16_t deprecated_since_version; /* version since this item is deprecated */
const char *deprecation_comment; /* comment about reasons for deprecation and settings that supersede this one */
const char *comment; /* comment */
} cfg_def_item_t;
config: use config checks and add support for creating trees from config definition (config_def_create_tree fn) Configuration checking is initiated during config load/processing (_process_config fn) which is part of the command context creation/refresh. This patch also defines 5 types of trees that could be created from the configuration definition (config_settings.h), the cfg_def_tree_t: - CFG_DEF_TREE_CURRENT that denotes a tree of all the configuration nodes that are explicitly defined in lvm.conf/--config - CFG_DEF_TREE_MISSING that denotes a tree of all missing configuration nodes for which default valus are used since they're not explicitly used in lvm.conf/--config - CFG_DEF_TREE_DEFAULT that denotes a tree of all possible configuration nodes with default values assigned, no matter what the actual lvm.conf/--config is - CFG_DEF_TREE_NEW that denotes a tree of all new configuration nodes that appeared in given version - CFG_DEF_TREE_COMPLETE that denotes a tree of the whole configuration tree that is used in LVM2 (a combination of CFG_DEF_TREE_CURRENT + CFG_DEF_TREE_MISSING). This is not implemented yet, it will be added later... The function that creates the definition tree of given type: struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec); Where the "spec" specifies the tree type to be created: struct config_def_tree_spec { cfg_def_tree_t type; /* tree type */ uint16_t version; /* tree at this LVM2 version */ int ignoreadvanced; /* do not include advanced configs */ int ignoreunsupported; /* do not include unsupported configs */ }; This tree can be passed to already existing functions that write the tree on output (like we already do with cmd->cft). There is a new lvm.conf section called "config" with two new options: - config/checks which enables/disables checking (enabled by default) - config/abort_on_errors which enables/disables aborts on any type of mismatch found in the config (disabled by default)
2013-03-05 20:36:10 +04:00
/* configuration definition tree types */
typedef enum {
CFG_DEF_TREE_CURRENT, /* tree of nodes with values currently set in the config */
CFG_DEF_TREE_MISSING, /* tree of nodes missing in current config using default values */
CFG_DEF_TREE_COMPLETE, /* CURRENT + MISSING, the tree actually used within execution, not implemented yet */
CFG_DEF_TREE_DEFAULT, /* tree of all possible config nodes with default values */
CFG_DEF_TREE_NEW, /* tree of all new nodes that appeared in given version */
CFG_DEF_TREE_PROFILABLE, /* tree of all nodes that are customizable by profiles */
CFG_DEF_TREE_PROFILABLE_CMD, /* tree of all nodes that are customizable by command profiles (subset of PROFILABLE) */
CFG_DEF_TREE_PROFILABLE_MDA, /* tree of all nodes that are customizable by metadata profiles (subset of PROFILABLE) */
CFG_DEF_TREE_DIFF, /* tree of all nodes that differ from defaults */
lvmconfig: add --type list and -l|--list lvmconfig --type list displays plain list of configuration settings. Some of the existing decorations can be used (--withsummary and --withversions) as well as existing options/switches (--ignoreadvanced, --ignoreunsupported, --ignorelocal, --atversion). For example (displaying only "config" section so the list is not long): $lvmconfig --type list config config/checks config/abort_on_errors config/profile_dir $ lvmconfig --type list --withsummary config config/checks - If enabled, any LVM configuration mismatch is reported. config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. config/profile_dir - Directory where LVM looks for configuration profiles. $ lvmconfig -l config config/checks - If enabled, any LVM configuration mismatch is reported. config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. config/profile_dir - Directory where LVM looks for configuration profiles. $ lvmconfig --type list --withsummary --withversions config config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99] config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99] config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99] Example with --atversion (displaying global section): $ lvmconfig --type list global global/umask global/test global/units global/si_unit_consistency global/suffix global/activation global/fallback_to_lvm1 global/format global/format_libraries global/segment_libraries global/proc global/etc global/locking_type global/wait_for_locks global/fallback_to_clustered_locking global/fallback_to_local_locking global/locking_dir global/prioritise_write_locks global/library_dir global/locking_library global/abort_on_internal_errors global/detect_internal_vg_cache_corruption global/metadata_read_only global/mirror_segtype_default global/raid10_segtype_default global/sparse_segtype_default global/lvdisplay_shows_full_device_path global/use_lvmetad global/thin_check_executable global/thin_dump_executable global/thin_repair_executable global/thin_check_options global/thin_repair_options global/thin_disabled_features global/cache_check_executable global/cache_dump_executable global/cache_repair_executable global/cache_check_options global/cache_repair_options global/system_id_source global/system_id_file $ lvmconfig --type list global --atversion 2.2.50 global/umask global/test global/units global/suffix global/activation global/fallback_to_lvm1 global/format global/format_libraries global/segment_libraries global/proc global/locking_type global/wait_for_locks global/fallback_to_clustered_locking global/fallback_to_local_locking global/locking_dir global/library_dir global/locking_library
2015-04-29 12:11:58 +03:00
CFG_DEF_TREE_LIST, /* list all nodes */
config: use config checks and add support for creating trees from config definition (config_def_create_tree fn) Configuration checking is initiated during config load/processing (_process_config fn) which is part of the command context creation/refresh. This patch also defines 5 types of trees that could be created from the configuration definition (config_settings.h), the cfg_def_tree_t: - CFG_DEF_TREE_CURRENT that denotes a tree of all the configuration nodes that are explicitly defined in lvm.conf/--config - CFG_DEF_TREE_MISSING that denotes a tree of all missing configuration nodes for which default valus are used since they're not explicitly used in lvm.conf/--config - CFG_DEF_TREE_DEFAULT that denotes a tree of all possible configuration nodes with default values assigned, no matter what the actual lvm.conf/--config is - CFG_DEF_TREE_NEW that denotes a tree of all new configuration nodes that appeared in given version - CFG_DEF_TREE_COMPLETE that denotes a tree of the whole configuration tree that is used in LVM2 (a combination of CFG_DEF_TREE_CURRENT + CFG_DEF_TREE_MISSING). This is not implemented yet, it will be added later... The function that creates the definition tree of given type: struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec); Where the "spec" specifies the tree type to be created: struct config_def_tree_spec { cfg_def_tree_t type; /* tree type */ uint16_t version; /* tree at this LVM2 version */ int ignoreadvanced; /* do not include advanced configs */ int ignoreunsupported; /* do not include unsupported configs */ }; This tree can be passed to already existing functions that write the tree on output (like we already do with cmd->cft). There is a new lvm.conf section called "config" with two new options: - config/checks which enables/disables checking (enabled by default) - config/abort_on_errors which enables/disables aborts on any type of mismatch found in the config (disabled by default)
2013-03-05 20:36:10 +04:00
} cfg_def_tree_t;
/* configuration definition tree specification */
struct config_def_tree_spec {
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
struct cmd_context *cmd; /* command context (for run-time defaults */
config: use config checks and add support for creating trees from config definition (config_def_create_tree fn) Configuration checking is initiated during config load/processing (_process_config fn) which is part of the command context creation/refresh. This patch also defines 5 types of trees that could be created from the configuration definition (config_settings.h), the cfg_def_tree_t: - CFG_DEF_TREE_CURRENT that denotes a tree of all the configuration nodes that are explicitly defined in lvm.conf/--config - CFG_DEF_TREE_MISSING that denotes a tree of all missing configuration nodes for which default valus are used since they're not explicitly used in lvm.conf/--config - CFG_DEF_TREE_DEFAULT that denotes a tree of all possible configuration nodes with default values assigned, no matter what the actual lvm.conf/--config is - CFG_DEF_TREE_NEW that denotes a tree of all new configuration nodes that appeared in given version - CFG_DEF_TREE_COMPLETE that denotes a tree of the whole configuration tree that is used in LVM2 (a combination of CFG_DEF_TREE_CURRENT + CFG_DEF_TREE_MISSING). This is not implemented yet, it will be added later... The function that creates the definition tree of given type: struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec); Where the "spec" specifies the tree type to be created: struct config_def_tree_spec { cfg_def_tree_t type; /* tree type */ uint16_t version; /* tree at this LVM2 version */ int ignoreadvanced; /* do not include advanced configs */ int ignoreunsupported; /* do not include unsupported configs */ }; This tree can be passed to already existing functions that write the tree on output (like we already do with cmd->cft). There is a new lvm.conf section called "config" with two new options: - config/checks which enables/disables checking (enabled by default) - config/abort_on_errors which enables/disables aborts on any type of mismatch found in the config (disabled by default)
2013-03-05 20:36:10 +04:00
cfg_def_tree_t type; /* tree type */
uint16_t version; /* tree at this LVM2 version */
unsigned ignoreadvanced:1; /* do not include advanced configs */
unsigned ignoreunsupported:1; /* do not include unsupported configs */
lvmconfig: add supporting code for handling deprecated settings This patch adds supporting code for handling deprecated settings. Deprecated settings are not displayed by default in lvmconfig output (except for --type current and --type diff). There's a new "--showdeprecated" lvmconfig option to display them if needed. Also, when using lvmconfig --withcomments, the comments with info about deprecation are displayed for deprecated settings and with lvmconfig --withversions, the version in which the setting was deprecated is displayed in addition to the version of introduction. If using --atversion with a version that is lower than the one in which the setting was deprecated, the setting is then considered as not deprecated (simply because at that version it was not deprecated). For example: $ lvmconfig --type default activation activation { ... raid_region_size=512 ... } $ lvmconfig --type default activation --showdeprecated activation { ... mirror_region_size=512 raid_region_size=512 ... } $ lvmconfig --type default activation --showdeprecated --withversions activation { ... # Available since version 1.0.0. # Deprecated since version 2.2.99. mirror_region_size=512 # Available since version 2.2.99. raid_region_size=512 ... } $ lvmconfig --type default activation --showdeprecated --withcomments activation { ... # Configuration option activation/mirror_region_size. # This has been replaced by the activation/raid_region_size # setting. # Size (in KB) of each copy operation when mirroring. # This configuration option is deprecated. mirror_region_size=512 # Configuration option activation/raid_region_size. # Size in KiB of each raid or mirror synchronization region. # For raid or mirror segment types, this is the amount of # data that is copied at once when initializing, or moved # at once by pvmove. raid_region_size=512 ... } $ lvmconfig --type default activation --withcomments --atversion 2.2.98 activation { ... # Configuration option activation/mirror_region_size. # Size (in KB) of each copy operation when mirroring. mirror_region_size=512 ... }
2015-04-30 18:40:24 +03:00
unsigned ignoredeprecated:1; /* do not include deprecated configs */
unsigned ignorelocal:1; /* do not include the local section */
unsigned withsummary:1; /* include first line of comments - a summary */
unsigned withcomments:1; /* include all comment lines */
unsigned withversions:1; /* include versions */
unsigned unconfigured:1; /* use unconfigured path strings */
uint8_t *check_status; /* status of last tree check (currently needed for CFG_DEF_TREE_MISSING only) */
config: use config checks and add support for creating trees from config definition (config_def_create_tree fn) Configuration checking is initiated during config load/processing (_process_config fn) which is part of the command context creation/refresh. This patch also defines 5 types of trees that could be created from the configuration definition (config_settings.h), the cfg_def_tree_t: - CFG_DEF_TREE_CURRENT that denotes a tree of all the configuration nodes that are explicitly defined in lvm.conf/--config - CFG_DEF_TREE_MISSING that denotes a tree of all missing configuration nodes for which default valus are used since they're not explicitly used in lvm.conf/--config - CFG_DEF_TREE_DEFAULT that denotes a tree of all possible configuration nodes with default values assigned, no matter what the actual lvm.conf/--config is - CFG_DEF_TREE_NEW that denotes a tree of all new configuration nodes that appeared in given version - CFG_DEF_TREE_COMPLETE that denotes a tree of the whole configuration tree that is used in LVM2 (a combination of CFG_DEF_TREE_CURRENT + CFG_DEF_TREE_MISSING). This is not implemented yet, it will be added later... The function that creates the definition tree of given type: struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec); Where the "spec" specifies the tree type to be created: struct config_def_tree_spec { cfg_def_tree_t type; /* tree type */ uint16_t version; /* tree at this LVM2 version */ int ignoreadvanced; /* do not include advanced configs */ int ignoreunsupported; /* do not include unsupported configs */ }; This tree can be passed to already existing functions that write the tree on output (like we already do with cmd->cft). There is a new lvm.conf section called "config" with two new options: - config/checks which enables/disables checking (enabled by default) - config/abort_on_errors which enables/disables aborts on any type of mismatch found in the config (disabled by default)
2013-03-05 20:36:10 +04:00
};
/* flag to mark the item as used in a config tree instance during validation */
#define CFG_USED 0x01
/* flag to mark the item as valid in a config tree instance during validation */
#define CFG_VALID 0x02
/* flag to mark the item as having the value different from default one */
#define CFG_DIFF 0x04
/*
* Register ID for each possible item in the configuration tree.
*/
enum {
#define cfg_section(id, name, parent, flags, since_version, deprecated_since_version, deprecation_comment, comment) id,
#define cfg(id, name, parent, flags, type, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) id,
#define cfg_runtime(id, name, parent, flags, type, since_version, deprecated_since_version, deprecation_comment, comment) id,
#define cfg_array(id, name, parent, flags, types, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) id,
#define cfg_array_runtime(id, name, parent, flags, types, since_version, deprecated_since_version, deprecation_comment, comment) id,
#include "config_settings.h"
#undef cfg_section
#undef cfg
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
#undef cfg_runtime
#undef cfg_array
config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults Previously, we declared a default value as undefined ("NULL") for settings which require runtime context to be set first (e.g. settings for paths that rely on SYSTEM_DIR environment variable or they depend on any other setting in some way). If we want to output default values as they are really used in runtime, we should make it possible to define a default value as function which is evaluated, not just providing a firm constant value as it was before. This patch defines simple prototypes for such functions. Also, there's new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide exactly the same functionality as the original "cfg" and "cfg_array" macros when defining the configuration settings in config_settings.h, but they don't set the constant default value. Instead, they automatically link the configuration setting definition with one of these functions: typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile); typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile); typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile); typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile); (The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and set the default value link to the function accordingly). Then such configuration setting requires a function of selected type to be defined. This function has a predefined name: get_default_<id> ...where the <id> is the id of the setting as defined in config_settings.h. For example "backup_archive_dir_CFG" if defined as a setting with default value evaluated in runtime with "cfg_runtime" will automatically have "get_default_backup_archive_dir_CFG" function linked to this setting to get the default value.
2014-03-03 15:34:11 +04:00
#undef cfg_array_runtime
};
config: differentiate command and metadata profiles and consolidate profile handling code - When defining configuration source, the code now uses separate CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers (before, it was just CONFIG_PROFILE that did not make the difference between the two). This helps when checking the configuration if it contains correct set of options which are all in either command-profilable or metadata-profilable group without mixing these groups together - so it's a firm distinction. The "command profile" can't contain "metadata profile" and vice versa! This is strictly checked and if the settings are mixed, such profile is rejected and it's not used. So in the end, the CONFIG_PROFILE_COMMAND set of options and CONFIG_PROFILE_METADATA are mutually exclusive sets. - Marking configuration with one or the other marker will also determine the way these configuration sources are positioned in the configuration cascade which is now: CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES - Marking configuration with one or the other marker will also make it possible to issue a command context refresh (will be probably a part of a future patch) if needed for settings in global profile set. For settings in metadata profile set this is impossible since we can't refresh cmd context in the middle of reading VG/LV metadata and for each VG/LV separately because each VG/LV can have a different metadata profile assinged and it's not possible to change these settings at this level. - When command profile is incorrect, it's rejected *and also* the command exits immediately - the profile *must* be correct for the command that was run with a profile to be executed. Before this patch, when the profile was found incorrect, there was just the warning message and the command continued without profile applied. But it's more correct to exit immediately in this case. - When metadata profile is incorrect, we reject it during command runtime (as we know the profile name from metadata and not early from command line as it is in case of command profiles) and we *do continue* with the command as we're in the middle of operation. Also, the metadata profile is applied directly and on the fly on find_config_tree_* fn call and even if the metadata profile is found incorrect, we still need to return the non-profiled value as found in the other configuration provided or default value. To exit immediately even in this case, we'd need to refactor existing find_config_tree_* fns so they can return error. Currently, these fns return only config values (which end up with default values in the end if the config is not found). - To check the profile validity before use to be sure it's correct, one can use : lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate (the --commandprofile/--metadataprofile for dumpconfig will come as part of the subsequent patch) - This patch also adds a reference to --commandprofile and --metadataprofile in the cmd help string (which was missing before for the --profile for some commands). We do not mention --profile now as people should use --commandprofile or --metadataprofile directly. However, the --profile is still supported for backward compatibility and it's translated as: --profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange (as these commands are able to attach profile to metadata) --profile == --commandprofile for all the other commands (--metadataprofile is not allowed there as it makes no sense) - This patch also contains some cleanups to make the code handling the profiles more readable...
2014-05-20 16:13:10 +04:00
struct profile *add_profile(struct cmd_context *cmd, const char *profile_name, config_source_t source);
int load_profile(struct cmd_context *cmd, struct profile *profile);
int load_pending_profiles(struct cmd_context *cmd);
/* configuration check handle for each instance of the validation check */
struct cft_check_handle {
struct cmd_context *cmd; /* command context */
struct dm_config_tree *cft; /* the tree for which the check is done */
config_source_t source; /* configuration source */
unsigned force_check:1; /* force check even if disabled by config/checks setting */
unsigned skip_if_checked:1; /* skip the check if already done before - return last state */
unsigned suppress_messages:1; /* suppress messages during the check if config item is found invalid */
unsigned check_diff:1; /* check if the value used differs from default one */
unsigned ignoreadvanced:1; /* do not include advnced configs */
unsigned ignoreunsupported:1; /* do not include unsupported configs */
uint8_t status[CFG_COUNT]; /* flags for each configuration item - the result of the check */
};
int config_def_get_path(char *buf, size_t buf_size, int id);
int config_def_check(struct cft_check_handle *handle);
int override_config_tree_from_string(struct cmd_context *cmd, const char *config_settings);
int override_config_tree_from_profile(struct cmd_context *cmd, struct profile *profile);
struct dm_config_tree *get_config_tree_by_source(struct cmd_context *, config_source_t source);
struct dm_config_tree *remove_config_tree_by_source(struct cmd_context *cmd, config_source_t source);
struct cft_check_handle *get_config_tree_check_handle(struct cmd_context *cmd, struct dm_config_tree *cft);
config_source_t config_get_source_type(struct dm_config_tree *cft);
typedef uint32_t (*checksum_fn_t) (uint32_t initial, const uint8_t *buf, uint32_t size);
2002-11-18 17:01:16 +03:00
struct dm_config_tree *config_open(config_source_t source, const char *filename, int keep_open);
int config_file_read_fd(struct dm_config_tree *cft, struct device *dev,
off_t offset, size_t size, off_t offset2, size_t size2,
checksum_fn_t checksum_fn, uint32_t checksum,
int skip_parse);
2013-01-19 15:04:17 +04:00
int config_file_read(struct dm_config_tree *cft);
struct dm_config_tree *config_file_open_and_read(const char *config_file, config_source_t source,
struct cmd_context *cmd);
int config_write(struct dm_config_tree *cft, struct config_def_tree_spec *tree_spec,
const char *file, int argc, char **argv);
config: use config checks and add support for creating trees from config definition (config_def_create_tree fn) Configuration checking is initiated during config load/processing (_process_config fn) which is part of the command context creation/refresh. This patch also defines 5 types of trees that could be created from the configuration definition (config_settings.h), the cfg_def_tree_t: - CFG_DEF_TREE_CURRENT that denotes a tree of all the configuration nodes that are explicitly defined in lvm.conf/--config - CFG_DEF_TREE_MISSING that denotes a tree of all missing configuration nodes for which default valus are used since they're not explicitly used in lvm.conf/--config - CFG_DEF_TREE_DEFAULT that denotes a tree of all possible configuration nodes with default values assigned, no matter what the actual lvm.conf/--config is - CFG_DEF_TREE_NEW that denotes a tree of all new configuration nodes that appeared in given version - CFG_DEF_TREE_COMPLETE that denotes a tree of the whole configuration tree that is used in LVM2 (a combination of CFG_DEF_TREE_CURRENT + CFG_DEF_TREE_MISSING). This is not implemented yet, it will be added later... The function that creates the definition tree of given type: struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec); Where the "spec" specifies the tree type to be created: struct config_def_tree_spec { cfg_def_tree_t type; /* tree type */ uint16_t version; /* tree at this LVM2 version */ int ignoreadvanced; /* do not include advanced configs */ int ignoreunsupported; /* do not include unsupported configs */ }; This tree can be passed to already existing functions that write the tree on output (like we already do with cmd->cft). There is a new lvm.conf section called "config" with two new options: - config/checks which enables/disables checking (enabled by default) - config/abort_on_errors which enables/disables aborts on any type of mismatch found in the config (disabled by default)
2013-03-05 20:36:10 +04:00
struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec);
void config_destroy(struct dm_config_tree *cft);
struct timespec config_file_timestamp(struct dm_config_tree *cft);
int config_file_changed(struct dm_config_tree *cft);
int config_file_check(struct dm_config_tree *cft, const char **filename, struct stat *info);
typedef enum {
CONFIG_MERGE_TYPE_RAW, /* always replace old config values with new config values when merging */
CONFIG_MERGE_TYPE_TAGS /* apply some exceptions when merging tag configs:
- skip tags section
- do not replace, but merge values of these settings:
activation/volume_list
devices/filter
devices/types
*/
} config_merge_t;
int merge_config_tree(struct cmd_context *cmd, struct dm_config_tree *cft,
struct dm_config_tree *newdata, config_merge_t);
/*
* The next two do not check config overrides and must only be used for the tags section.
*/
const struct dm_config_node *find_config_node(struct cmd_context *cmd, struct dm_config_tree *cft, int id);
int find_config_bool(struct cmd_context *cmd, struct dm_config_tree *cft, int id);
/*
* These versions check an override tree, if present, first.
*/
const struct dm_config_node *find_config_tree_node(struct cmd_context *cmd, int id, struct profile *profile);
const char *find_config_tree_str(struct cmd_context *cmd, int id, struct profile *profile);
const char *find_config_tree_str_allow_empty(struct cmd_context *cmd, int id, struct profile *profile);
int find_config_tree_int(struct cmd_context *cmd, int id, struct profile *profile);
int64_t find_config_tree_int64(struct cmd_context *cmd, int id, struct profile *profile);
float find_config_tree_float(struct cmd_context *cmd, int id, struct profile *profile);
int find_config_tree_bool(struct cmd_context *cmd, int id, struct profile *profile);
2002-01-10 19:47:58 +03:00
/*
* Functions for configuration settings for which the default
* value is evaluated at runtime based on command context.
*/
const char *get_default_devices_cache_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_devices_cache_dir_CFG(struct cmd_context *cmd);
const char *get_default_devices_cache_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_devices_cache_CFG(struct cmd_context *cmd);
const char *get_default_backup_backup_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_backup_backup_dir_CFG(struct cmd_context *cmd);
const char *get_default_backup_archive_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_backup_archive_dir_CFG(struct cmd_context *cmd);
const char *get_default_config_profile_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_config_profile_dir_CFG(struct cmd_context *cmd);
const char *get_default_activation_mirror_image_fault_policy_CFG(struct cmd_context *cmd, struct profile *profile);
#define get_default_unconfigured_activation_mirror_image_fault_policy_CFG NULL
int get_default_allocation_thin_pool_chunk_size_CFG(struct cmd_context *cmd, struct profile *profile);
#define get_default_unconfigured_allocation_thin_pool_chunk_size_CFG NULL
int get_default_allocation_cache_pool_chunk_size_CFG(struct cmd_context *cmd, struct profile *profile);
#define get_default_unconfigured_allocation_cache_pool_chunk_size_CFG NULL
#endif