shaba/lvm2
1
0
Fork 0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-30 17:18:21 +03:00
Code Releases Activity

all: fix typos

Browse Source
This commit is contained in:
Samanta Navarro 2020-10-03 11:52:37 +00:00 committed by Zdenek Kabelac
parent d5b0c72f40
commit 01d5e4d1ca
30 changed files with 60 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
WHATS_NEW
View File

@ -1769,7 +1769,7 @@ Version 2.02.105 - 20th January 2014
Allow lvmetad to reuse stale socket.
Only unlink lvmetad socket on error if created by the same process.
Append missing newline to lvmetad missing socket path error message.
Check for non-zero aligment in _text_pv_add_metadata_area() to not div by 0.
Check for non-zero alignment in _text_pv_add_metadata_area() to not div by 0.
Add allocation/use_blkid_wiping to lvm.conf to enable blkid wiping.
Enable blkid_wiping by default if the blkid library is present.
Add configure --disable-blkid_wiping to disable libblkid signature detection.

2
WHATS_NEW_DM
View File

@ -555,7 +555,7 @@ Version 1.02.86 - 23rd June 2014
Add DM_REPORT_FIELD_TYPE_STRING_LIST: separate string and string list fields.
Add dm_str_list to libdevmapper for string list type definition and its reuse.
Add dmsetup -S/--select to define selection criteria for dmsetup reports.
Add dm_report_init_with_selection to intialize report with selection criteria.
Add dm_report_init_with_selection to initialize report with selection criteria.
Add DM_REPORT_FIELD_TYPE_SIZE: separate number and size reporting fields.
Use RemoveOnStop for dm-event.socket systemd unit.
Document env var 'DM_DEFAULT_NAME_MANGLING_MODE' in dmsetup man page.

14
conf/example.conf.in
View File

@ -270,16 +270,16 @@ devices {
# Configuration option devices/md_chunk_alignment.
# Align the start of a PV data area with md device's stripe-width.
# This applies if a PV is placed directly on an md device.
# default_data_alignment will be overriden if it is not aligned
# default_data_alignment will be overridden if it is not aligned
# with the value detected for this setting.
# This setting is overriden by data_alignment_detection,
# This setting is overridden by data_alignment_detection,
# data_alignment, and the --dataalignment option.
md_chunk_alignment = 1
# Configuration option devices/default_data_alignment.
# Align the start of a PV data area with this number of MiB.
# Set to 1 for 1MiB, 2 for 2MiB, etc. Set to 0 to disable.
# This setting is overriden by data_alignment and the --dataalignment
# This setting is overridden by data_alignment and the --dataalignment
# option.
# This configuration option has an automatic default value.
# default_data_alignment = 1
@ -293,9 +293,9 @@ devices {
# preferred unit of receiving I/O, e.g. MD stripe width.
# minimum_io_size is used if optimal_io_size is undefined (0).
# If md_chunk_alignment is enabled, that detects the optimal_io_size.
# default_data_alignment and md_chunk_alignment will be overriden
# default_data_alignment and md_chunk_alignment will be overridden
# if they are not aligned with the value detected for this setting.
# This setting is overriden by data_alignment and the --dataalignment
# This setting is overridden by data_alignment and the --dataalignment
# option.
data_alignment_detection = 1
@ -304,7 +304,7 @@ devices {
# When non-zero, this setting overrides default_data_alignment.
# Set to 0 to disable, in which case default_data_alignment
# is used to align the first PE in units of MiB.
# This setting is overriden by the --dataalignment option.
# This setting is overridden by the --dataalignment option.
data_alignment = 0
# Configuration option devices/data_alignment_offset_detection.
@ -315,7 +315,7 @@ devices {
# partitioning will have an alignment_offset of 3584 bytes (sector 7
# is the lowest aligned logical block, the 4KiB sectors start at
# LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
# This setting is overriden by the --dataalignmentoffset option.
# This setting is overridden by the --dataalignmentoffset option.
data_alignment_offset_detection = 1
# Configuration option devices/ignore_suspended_devices.

2
daemons/dmeventd/plugins/raid/dmeventd_raid.c
View File

@ -77,7 +77,7 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
if (dead) {
/*
* Use the first event to run a repair ignoring any additonal ones.
* Use the first event to run a repair ignoring any additional ones.
*
* We presume lvconvert to do pre-repair
* checks to avoid bloat in this plugin.

2
doc/kernel/integrity.txt
View File

@ -94,7 +94,7 @@ journal_watermark:number
commit_time:number
Commit time in milliseconds. When this time passes, the journal is
written. The journal is also written immediatelly if the FLUSH
written. The journal is also written immediately if the FLUSH
request is received.
internal_hash:algorithm(:key) (the key is optional)

14
lib/config/config_settings.h
View File

@ -427,15 +427,15 @@ cfg(devices_fw_raid_component_detection_CFG, "fw_raid_component_detection", devi
cfg(devices_md_chunk_alignment_CFG, "md_chunk_alignment", devices_CFG_SECTION, 0, CFG_TYPE_BOOL, DEFAULT_MD_CHUNK_ALIGNMENT, vsn(2, 2, 48), NULL, 0, NULL,
"Align the start of a PV data area with md device's stripe-width.\n"
"This applies if a PV is placed directly on an md device.\n"
"default_data_alignment will be overriden if it is not aligned\n"
"default_data_alignment will be overridden if it is not aligned\n"
"with the value detected for this setting.\n"
"This setting is overriden by data_alignment_detection,\n"
"This setting is overridden by data_alignment_detection,\n"
"data_alignment, and the --dataalignment option.\n")
cfg(devices_default_data_alignment_CFG, "default_data_alignment", devices_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, FIRST_PE_AT_ONE_MB_IN_MB, vsn(2, 2, 75), NULL, 0, NULL,
"Align the start of a PV data area with this number of MiB.\n"
"Set to 1 for 1MiB, 2 for 2MiB, etc. Set to 0 to disable.\n"
"This setting is overriden by data_alignment and the --dataalignment\n"
"This setting is overridden by data_alignment and the --dataalignment\n"
"option.\n")
cfg(devices_data_alignment_detection_CFG, "data_alignment_detection", devices_CFG_SECTION, 0, CFG_TYPE_BOOL, DEFAULT_DATA_ALIGNMENT_DETECTION, vsn(2, 2, 51), NULL, 0, NULL,
@ -447,9 +447,9 @@ cfg(devices_data_alignment_detection_CFG, "data_alignment_detection", devices_CF
"preferred unit of receiving I/O, e.g. MD stripe width.\n"
"minimum_io_size is used if optimal_io_size is undefined (0).\n"
"If md_chunk_alignment is enabled, that detects the optimal_io_size.\n"
"default_data_alignment and md_chunk_alignment will be overriden\n"
"default_data_alignment and md_chunk_alignment will be overridden\n"
"if they are not aligned with the value detected for this setting.\n"
"This setting is overriden by data_alignment and the --dataalignment\n"
"This setting is overridden by data_alignment and the --dataalignment\n"
"option.\n")
cfg(devices_data_alignment_CFG, "data_alignment", devices_CFG_SECTION, 0, CFG_TYPE_INT, 0, vsn(2, 2, 45), NULL, 0, NULL,
@ -457,7 +457,7 @@ cfg(devices_data_alignment_CFG, "data_alignment", devices_CFG_SECTION, 0, CFG_TY
"When non-zero, this setting overrides default_data_alignment.\n"
"Set to 0 to disable, in which case default_data_alignment\n"
"is used to align the first PE in units of MiB.\n"
"This setting is overriden by the --dataalignment option.\n")
"This setting is overridden by the --dataalignment option.\n")
cfg(devices_data_alignment_offset_detection_CFG, "data_alignment_offset_detection", devices_CFG_SECTION, 0, CFG_TYPE_BOOL, DEFAULT_DATA_ALIGNMENT_OFFSET_DETECTION, vsn(2, 2, 50), NULL, 0, NULL,
"Shift the start of an aligned PV data area based on sysfs information.\n"
@ -467,7 +467,7 @@ cfg(devices_data_alignment_offset_detection_CFG, "data_alignment_offset_detectio
"partitioning will have an alignment_offset of 3584 bytes (sector 7\n"
"is the lowest aligned logical block, the 4KiB sectors start at\n"
"LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).\n"
"This setting is overriden by the --dataalignmentoffset option.\n")
"This setting is overridden by the --dataalignmentoffset option.\n")
cfg(devices_ignore_suspended_devices_CFG, "ignore_suspended_devices", devices_CFG_SECTION, 0, CFG_TYPE_BOOL, DEFAULT_IGNORE_SUSPENDED_DEVICES, vsn(1, 2, 19), NULL, 0, NULL,
"Ignore DM devices that have I/O suspended while scanning devices.\n"

2
lib/locking/lvmlockd.c
View File

@ -1289,7 +1289,7 @@ int lockd_start_wait(struct cmd_context *cmd)
* can provide in the lock-gl call.
*
* lockd_gl() and lockd_gl_create() differ in the specific cases where
* ENOLS (no lockspace found) is overriden. In the vgcreate case, the
* ENOLS (no lockspace found) is overridden. In the vgcreate case, the
* override cases are related to sanlock bootstrap, and the lock_type of
* the vg being created is needed.
*

2
lib/metadata/raid_manip.c
View File

@ -5463,7 +5463,7 @@ static int _takeover_upconvert_wrapper(TAKEOVER_FN_ARGS)
extents_copied = seg->extents_copied;
seg_len = seg->len;
/* In case of raid4/5, adjust to allow for allocation of additonal image pairs */
/* In case of raid4/5, adjust to allow for allocation of additional image pairs */
if (seg_is_raid4(seg) || seg_is_any_raid5(seg)) {
if (!(seg->segtype = get_segtype_from_flag(lv->vg->cmd, SEG_RAID0_META)))
return_0;

2
man/dmsetup.8_main
View File

@ -510,7 +510,7 @@ Suppress the headings line when using columnar output.
.
.HP
.BR --noflush
Do not flush outstading I/O when suspending a device, or do not
Do not flush outstanding I/O when suspending a device, or do not
commit thin-pool metadata when obtaining thin-pool status.
.
.HP

4
man/dmstats.8_main
View File

@ -553,7 +553,7 @@ Can also specify custom units e.g. \fB--units\ 3M\fP.
.IR user_data
.br
Specify user data (a word) to be stored with a new region. The value
is added to any internal auxilliary data (for example, group
is added to any internal auxiliary data (for example, group
information), and stored with the region in the aux_data field provided
by the kernel. Whitespace is not permitted.
.
@ -1022,7 +1022,7 @@ Group identifier. This is a non-negative integer returned by the dmstats
.TP
.B interval_ns
The estimated interval over which the current counter values have
accumulated. The value is reported as an interger expressed in units
accumulated. The value is reported as an integer expressed in units
of nanoseconds.
.TP
.B interval

2
man/lvchange.8_pregen
View File

@ -678,7 +678,7 @@ multiple tags at once. See \fBlvm\fP(8) for information about tags.
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
man/lvconvert.8_pregen
View File

@ -1192,7 +1192,7 @@ Common options for lvm:
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
man/lvcreate.8_pregen
View File

@ -1269,7 +1269,7 @@ multiple tags at once. See \fBlvm\fP(8) for information about tags.
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
man/lvextend.8_pregen
View File

@ -362,7 +362,7 @@ Common options for lvm:
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

4
man/lvm.8_main
View File

@ -427,12 +427,12 @@ File descriptor to use for report output from LVM commands.
.TP
.B LVM_COMMAND_PROFILE
Name of default command profile to use for LVM commands. This profile
is overriden by direct use of \fB--commandprofile\fP command line option.
is overridden by direct use of \fB--commandprofile\fP command line option.
.TP
.B LVM_RUN_BY_DMEVENTD
This variable is normally set by dmeventd plugin to inform lvm2 command
it is running from dmeventd plugin so lvm2 takes some extra action
to avoid comunication and deadlocks with dmeventd.
to avoid communication and deadlocks with dmeventd.
.TP
.B LVM_SYSTEM_DIR
Directory containing \fBlvm.conf\fP(5) and other LVM system files.

10
man/lvmraid.7_main
View File

@ -180,7 +180,7 @@ parity 0 with data restart.) See \fBRAID5 variants\fP below.
raid6 is a form of striping like raid5, but uses two extra devices for
parity blocks. LV data and parity blocks are stored on each device, typically
in a rotating pattern for perfomramce reasons. The
in a rotating pattern for performance reasons. The
LV data remains available if up to two devices fail. The parity is used
to recalculate data that is lost from one or two devices. The minimum
number of devices required is 5.
@ -376,7 +376,7 @@ The \fBrepair\fP mode can make the RAID LV data consistent, but it does
not know which data is correct. The result may be consistent but
incorrect data. When two different blocks of data must be made
consistent, it chooses the block from the device that would be used during
RAID intialization. However, if the PV holding corrupt data is known,
RAID initialization. However, if the PV holding corrupt data is known,
lvchange --rebuild can be used in place of scrubbing to reconstruct the
data on the bad device.
@ -475,7 +475,7 @@ holds parity. Each rmeta SubLV holds RAID metadata.
.B raid5
.br
At least three rimage SubLVs each typcially hold a portion of LV data and parity
At least three rimage SubLVs each typically hold a portion of LV data and parity
(see section on raid5)
Each rmeta SubLV holds RAID metadata.
@ -1347,7 +1347,7 @@ The 'R' in the same column of the attribute field shows the freed image Sub LVs
lv_rimage_6:0-33 8192
.fi
Now that the reshape is finished the 'R' atribute on the RaidLV shows images can be removed.
Now that the reshape is finished the 'R' attribute on the RaidLV shows images can be removed.
.nf
# lvs -o lv_name,attr,segtype,seg_pe_ranges,dataoffset vg
@ -1584,7 +1584,7 @@ conversion.
Now we'll change the number of data stripes from 1 to 5 and request 128K stripe size
in one command. This will grow the size of the LV by a factor of 5 (we add 4 data stripes
to the one given). That additonal space can be used by e.g. growing any contained filesystem
to the one given). That additional space can be used by e.g. growing any contained filesystem
or the LV can be reduced in size after the reshaping conversion has finished.
.nf

10
man/lvmreport.7_main
View File

@ -129,7 +129,7 @@ Definition of the set set of fields to use
.br
Field set to use. See \fBmain report specifics\fP and
\fBlog report specifics\fP for information about field sets configured with
global configuratin settings that this option overrides.
global configuration settings that this option overrides.
.IP - 3
--options|-o+ FieldSet
.br
@ -240,7 +240,7 @@ this option suppresses the \fBmain report\fP output and it causes the
.IP - 3
--unbuffered
.br
Overrides report/bufffered configuration setting.
Overrides report/buffered configuration setting.
.RE
.RE
@ -1337,7 +1337,7 @@ field which is of type "size" - it's =, !=, >=, >, <= and <. You can find
applicable comparison operators for other fields and other field types the
same way.
To demostrate selection functionality in LVM, we will create more LVs in
To demonstrate selection functionality in LVM, we will create more LVs in
addition to lvol0 and lvol1 we used in our previous examples.
.nf
@ -1686,9 +1686,9 @@ subreport here.
Below is an extended example with \fBlvm fullreport\fP to illustrate
combination of various options. The report output is in JSON format.
Also, we configure "vg", "pvseg", "seg" and "log" subreport to contain
only specified fields. For the "pvseg" subreport, we're intested only
only specified fields. For the "pvseg" subreport, we're interested only
in PV names having "sda" in their name. For the "log" subreport we're
intested only in log lines related to either "lvol0" object or object
interested only in log lines related to either "lvol0" object or object
having "sda" in its name. Also, for the log subreport we define ordering
to be based on "log_object_type" field.

2
man/lvmsystemid.7_main
View File

@ -122,7 +122,7 @@ accessible to any host.
.B Owned:
A local VG that has a system ID set, as viewed from the host with a
matching system ID (the owner). This VG type is acessible to the host.
matching system ID (the owner). This VG type is accessible to the host.
.B Foreign:
A local VG that has a system ID set, as viewed from any host with an

2
man/lvresize.8_pregen
View File

@ -310,7 +310,7 @@ Common options for lvm:
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

6
man/pvcreate.8_des
View File

@ -54,7 +54,7 @@ default_data_alignment 1 (MiB), setting --metadatasize 2048k results in
pe_start of 3 MiB and mda_size of 3068 KiB. Alternatively, --metadatasize
2044k results in pe_start at 2 MiB and mda_size of 2044 KiB.
The alignment of pe_start described above may be automatically overriden
The alignment of pe_start described above may be automatically overridden
based on md device properties or device i/o properties reported in sysfs.
These automatic adjustments can be enabled/disabled using lvm.conf
settings md_chunk_alignment and data_alignment_offset_detection.
@ -72,7 +72,7 @@ provides at least 2048 KiB of metadata space.
Always check the resulting alignment and metadata size when using
these options.
To shift an aligned pe_start value, use the --dataaligmentoffset option.
To shift an aligned pe_start value, use the --dataalignmentoffset option.
The pe_start alignment is calculated as described above, and then the
value specified with --dataaligmentoffset is added to produce the final
value specified with --dataalignmentoffset is added to produce the final
pe_start value.

6
man/pvcreate.8_pregen
View File

@ -64,7 +64,7 @@ default_data_alignment 1 (MiB), setting --metadatasize 2048k results in
pe_start of 3 MiB and mda_size of 3068 KiB. Alternatively, --metadatasize
2044k results in pe_start at 2 MiB and mda_size of 2044 KiB.
The alignment of pe_start described above may be automatically overriden
The alignment of pe_start described above may be automatically overridden
based on md device properties or device i/o properties reported in sysfs.
These automatic adjustments can be enabled/disabled using lvm.conf
settings md_chunk_alignment and data_alignment_offset_detection.
@ -82,9 +82,9 @@ provides at least 2048 KiB of metadata space.
Always check the resulting alignment and metadata size when using
these options.
To shift an aligned pe_start value, use the --dataaligmentoffset option.
To shift an aligned pe_start value, use the --dataalignmentoffset option.
The pe_start alignment is calculated as described above, and then the
value specified with --dataaligmentoffset is added to produce the final
value specified with --dataalignmentoffset is added to produce the final
pe_start value.
.SH USAGE
\fBpvcreate\fP \fIPV\fP ...

2
man/pvmove.8_pregen
View File

@ -172,7 +172,7 @@ destination PV, while unmoved segments will remain on the source PV.
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
man/vgchange.8_pregen
View File

@ -697,7 +697,7 @@ multiple tags at once. See \fBlvm\fP(8) for information about tags.
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
man/vgcreate.8_des
View File

@ -1,5 +1,5 @@
vgcreate creates a new VG on block devices. If the devices were not
previously intialized as PVs with \fBpvcreate\fP(8), vgcreate will
previously initialized as PVs with \fBpvcreate\fP(8), vgcreate will
inititialize them, making them PVs. The pvcreate options for initializing
devices are also available with vgcreate.

4
man/vgcreate.8_pregen
View File

@ -9,7 +9,7 @@ vgcreate - Create a volume group
.br
.SH DESCRIPTION
vgcreate creates a new VG on block devices. If the devices were not
previously intialized as PVs with \fBpvcreate\fP(8), vgcreate will
previously initialized as PVs with \fBpvcreate\fP(8), vgcreate will
inititialize them, making them PVs. The pvcreate options for initializing
devices are also available with vgcreate.
@ -191,7 +191,7 @@ multiple tags at once. See \fBlvm\fP(8) for information about tags.
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
man/vgsplit.8_pregen
View File

@ -145,7 +145,7 @@ Common options for lvm:
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
which can be changed with vgchange/lvchange, or overridden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.

2
test/shell/snapshot-merge-thin.sh
View File

@ -54,7 +54,7 @@ aux delay_dev "$dev1" 0 400 "$(get first_extent_sector "$dev1"):"
# Initiate background merge
lvconvert -b --merge $vg/$lv2
# Query status of snapshot immediatelly after start
# Query status of snapshot immediately after start
# - may hit race of checking already in-progress merge
#lvs -a -o+lv_merging,lv_merge_failed $vg
check lv_field $vg/$lv1 lv_merging "merging"

6
tools/args.h
View File

@ -59,7 +59,7 @@ arg(aligned_ARG, '\0', "aligned", 0, 0, 0,
arg(alloc_ARG, '\0', "alloc", alloc_VAL, 0, 0,
"Determines the allocation policy when a command needs to allocate\n"
"Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy\n"
"which can be changed with vgchange/lvchange, or overriden on the\n"
"which can be changed with vgchange/lvchange, or overridden on the\n"
"command line.\n"
"\\fBnormal\\fP applies common sense rules such as not placing parallel stripes\n"
"on the same PV.\n"
@ -1138,7 +1138,7 @@ arg(maxlogicalvolumes_ARG, 'l', "maxlogicalvolumes", uint32_VAL, 0, 0,
"Sets the maximum number of LVs allowed in a VG.\n")
/*
* The extents_VAL is overriden in configure_command_option_values()
* The extents_VAL is overridden in configure_command_option_values()
* according to the command being run. Different commands accept
* different signs with the value.
*/
@ -1197,7 +1197,7 @@ arg(lvmpartition_ARG, 'l', "lvmpartition", 0, 0, 0,
"Only report PVs.\n")
/*
* The sizemb_VAL is overriden in configure_command_option_values()
* The sizemb_VAL is overridden in configure_command_option_values()
* according to the command being run. Different commands accept
* different signs with the value.
*/

4
tools/command.c
View File

@ -1650,14 +1650,14 @@ int define_commands(struct cmd_context *cmdtool, const char *run_name)
*
* This function overrides default opt_names[] entries at run time according
* to the command name, adjusting the value types accepted by various options.
* So, for lvresize, opt_names[sizemb_VAL] is overriden to accept
* So, for lvresize, opt_names[sizemb_VAL] is overridden to accept
* the relative (+ or -) value type ssizemb_VAL, instead of the default
* sizemb_VAL. This way, when lvresize processes the --size value, it
* will use the ssize_mb_arg() function which accepts relative size values.
* When lvcreate processes the --size value, it uses size_mb_arg() which
* rejects signed values.
*
* The command defs in commands[] do not need to be overriden because
* The command defs in commands[] do not need to be overridden because
* the command-lines.in defs have the context of a command, and are
* described using the proper value type, e.g. this cmd def already
* uses the relative size value: "lvresize --size SSizeMB LV",

2
tools/toollib.c
View File

@ -4827,7 +4827,7 @@ static void _check_pvcreate_prompt(struct cmd_context *cmd,
}
if (answer_yes && answer_no) {
log_warn("WARNING: prompt answer yes is overriden by prompt answer no.");
log_warn("WARNING: prompt answer yes is overridden by prompt answer no.");
answer_yes = 0;
}