1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-25 01:34:38 +03:00

lib: new vdo segment configurable options

Configurable for vdo segment with their default values.
Also specify their ranges with minimal and maximal values.
This commit is contained in:
Zdenek Kabelac 2018-06-29 11:09:03 +02:00
parent 4a90b0c4c9
commit 0d9a4c6989
4 changed files with 361 additions and 1 deletions

View File

@ -488,6 +488,149 @@ allocation {
# Default physical extent size in KiB to use for new VGs.
# This configuration option has an automatic default value.
# physical_extent_size = 4096
# Configuration option allocation/vdo_use_compression.
# Enables or disables compression when creating a VDO volume.
# Compression may be disabled if necessary to maximize performance
# or to speed processing of data that is unlikely to compress.
# This configuration option has an automatic default value.
# vdo_use_compression = 1
# Configuration option allocation/vdo_use_deduplication.
# Enables or disables deduplication when creating a VDO volume.
# Deduplication may be disabled in instances where data is not expected
# to have good deduplication rates but compression is still desired.
# This configuration option has an automatic default value.
# vdo_use_deduplication = 1
# Configuration option allocation/vdo_emulate_512_sectors.
# Specifies that the VDO volume is to emulate a 512 byte block device.
# This configuration option has an automatic default value.
# vdo_emulate_512_sectors = 0
# Configuration option allocation/vdo_block_map_cache_size_mb.
# Specifies the amount of memory in MiB allocated for caching block map
# pages for VDO volume. The value must be a multiple of 4096 and must be
# at least 128MiB and less than 16TiB. The cache must be at least 16MiB
# per logical thread. Note that there is a memory overhead of 15%.
# This configuration option has an automatic default value.
# vdo_block_map_cache_size_mb = 128
# Configuration option allocation/vdo_block_map_period.
# Tunes the quantity of block map updates that can accumulate
# before cache pages are flushed to disk. The value must be
# at least 1 and less then 16380.
# A lower value means shorter recovery time but lower performance.
# This configuration option has an automatic default value.
# vdo_block_map_period = 16380
# Configuration option allocation/vdo_check_point_frequency.
# The default check point frequency for VDO volume.
# This configuration option has an automatic default value.
# vdo_check_point_frequency = 0
# Configuration option allocation/vdo_use_sparse_index.
# Enables sparse indexing for VDO volume.
# This configuration option has an automatic default value.
# vdo_use_sparse_index = 0
# Configuration option allocation/vdo_index_memory_size_mb.
# Specifies the amount of index memory in MiB for VDO volume.
# The value must be at least 256MiB and at most 1TiB.
# This configuration option has an automatic default value.
# vdo_index_memory_size_mb = 256
# Configuration option allocation/vdo_use_read_cache.
# Enables or disables the read cache within the VDO volume.
# The cache should be enabled if write workloads are expected
# to have high levels of deduplication, or for read intensive
# workloads of highly compressible data.
# This configuration option has an automatic default value.
# vdo_use_read_cache = 0
# Configuration option allocation/vdo_read_cache_size_mb.
# Specifies the extra VDO volume read cache size in MiB.
# This space is in addition to a system-defined minimum.
# The value must be less then 16TiB and 1.12 MiB of memory
# will be used per MiB of read cache specified, per bio thread.
# This configuration option has an automatic default value.
# vdo_read_cache_size_mb = 0
# Configuration option allocation/vdo_slab_size_mb.
# Specifies the size in MiB of the increment by which a VDO is grown.
# Using a smaller size constrains the total maximum physical size
# that can be accommodated. Must be a power of two between 128MiB and 32GiB.
# This configuration option has an automatic default value.
# vdo_slab_size_mb = 2048
# Configuration option allocation/vdo_ack_threads.
# Specifies the number of threads to use for acknowledging
# completion of requested VDO I/O operations.
# The value must be at in range [0..100].
# This configuration option has an automatic default value.
# vdo_ack_threads = 1
# Configuration option allocation/vdo_bio_threads.
# Specifies the number of threads to use for submitting I/O
# operations to the storage device of VDO volume.
# The value must be in range [1..100]
# Each additional thread after the first will use an additional 18MiB of RAM,
# plus 1.12 MiB of RAM per megabyte of configured read cache size.
# This configuration option has an automatic default value.
# vdo_bio_threads = 1
# Configuration option allocation/vdo_bio_rotation.
# Specifies the number of I/O operations to enqueue for each bio-submission
# thread before directing work to the next. The value must be in range [1..1024].
# This configuration option has an automatic default value.
# vdo_bio_rotation = 64
# Configuration option allocation/vdo_cpu_threads.
# Specifies the number of threads to use for CPU-intensive work such as
# hashing or compression for VDO volume. The value must be in range [1..100]
# This configuration option has an automatic default value.
# vdo_cpu_threads = 2
# Configuration option allocation/vdo_hash_zone_threads.
# Specifies the number of threads across which to subdivide parts of the VDO
# processing based on the hash value computed from the block data.
# The value must be at in range [0..100].
# vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be
# either all zero or all non-zero.
# This configuration option has an automatic default value.
# vdo_hash_zone_threads = 1
# Configuration option allocation/vdo_logical_threads.
# Specifies the number of threads across which to subdivide parts of the VDO
# processing based on the hash value computed from the block data.
# A logical thread count of 9 or more will require explicitly specifying
# a sufficiently large block map cache size, as well.
# The value must be in range [0..100].
# vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be
# either all zero or all non-zero.
# This configuration option has an automatic default value.
# vdo_logical_threads = 1
# Configuration option allocation/vdo_physical_threads.
# Specifies the number of threads across which to subdivide parts of the VDO
# processing based on physical block addresses.
# Each additional thread after the first will use an additional 10MiB of RAM.
# The value must be in range [0..16].
# vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be
# either all zero or all non-zero.
# This configuration option has an automatic default value.
# vdo_physical_threads = 1
# Configuration option allocation/vdo_write_policy.
# Specifies the write policy:
# auto - VDO will check the storage device and determine whether it supports flushes.
# If it does, VDO will run in async mode, otherwise it will run in sync mode.
# sync - Writes are acknowledged only after data is stably written.
# This policy is not supported if the underlying storage is not also synchronous.
# async - Writes are acknowledged after data has been cached for writing to stable storage.
# Data which has not been flushed is not guaranteed to persist in this mode.
# This configuration option has an automatic default value.
# vdo_write_policy = "auto"
}
# Configuration section log.
@ -1006,6 +1149,17 @@ global {
# This configuration option has an automatic default value.
# cache_repair_options = [ "" ]
# Configuration option global/vdo_format_executable.
# The full path to the vdoformat command.
# LVM uses this command to initial data volume for VDO type logical volume
# This configuration option has an automatic default value.
# vdo_format_executable = "@VDO_FORMAT_CMD@"
# Configuration option global/vdo_format_options.
# List of options passed added to standard vdoformat command.
# This configuration option has an automatic default value.
# vdo_format_options = [ "" ]
# Configuration option global/fsadm_executable.
# The full path to the fsadm command.
# LVM uses this command to help with lvresize -r operations.

View File

@ -0,0 +1,60 @@
/*
* Copyright (C) 2018 Red Hat, Inc. All rights reserved.
*
* This file is part of the device-mapper userspace tools.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef DEVICE_MAPPER_VDO_LIMITS_H
#define DEVICE_MAPPER_VDO_LIMITS_H
#define DM_VDO_BLOCK_SIZE UINT64_C(8) // 4KiB in sectors
#define DM_VDO_BLOCK_MAP_CACHE_SIZE_MINIMUM_MB (128) // 128MiB
#define DM_VDO_BLOCK_MAP_CACHE_SIZE_MAXIMUM_MB (16 * 1024 * 1024 - 1) // 16TiB - 1
#define DM_VDO_BLOCK_MAP_CACHE_SIZE_MINIMUM_PER_LOGICAL_THREAD (4096 * DM_VDO_BLOCK_SIZE_KB)
#define DM_VDO_BLOCK_MAP_PERIOD_MINIMUM 1
#define DM_VDO_BLOCK_MAP_PERIOD_MAXIMUM (16380)
#define DM_VDO_INDEX_MEMORY_SIZE_MINIMUM_MB (256) // 0.25 GiB
#define DM_VDO_INDEX_MEMORY_SIZE_MAXIMUM_MB (1024 * 1024 * 1024) // 1TiB
//#define DM_VDO_READ_CACHE_SIZE_MINIMUM_MB (0)
#define DM_VDO_READ_CACHE_SIZE_MAXIMUM_MB (16 * 1024 * 1024 - 1) // 16TiB - 1
#define DM_VDO_SLAB_SIZE_MINIMUM_MB (128) // 128MiB
#define DM_VDO_SLAB_SIZE_MAXIMUM_MB (32 * 1024) // 32GiB
//#define DM_VDO_LOGICAL_SIZE_MINIMUM_MB (0)
#define DM_VDO_LOGICAL_SIZE_MAXIMUM_MB (UINT64_C(4) * 1024 * 1024 * 1024) // 4PiB
//#define DM_VDO_ACK_THREADS_MINIMUM (0)
#define DM_VDO_ACK_THREADS_MAXIMUM (100)
#define DM_VDO_BIO_THREADS_MINIMUM (1)
#define DM_VDO_BIO_THREADS_MAXIMUM (100)
#define DM_VDO_BIO_ROTATION_MINIMUM (1)
#define DM_VDO_BIO_ROTATION_MAXIMUM (1024)
#define DM_VDO_CPU_THREADS_MINIMUM (1)
#define DM_VDO_CPU_THREADS_MAXIMUM (100)
//#define DM_VDO_HASH_ZONE_THREADS_MINIMUM (0)
#define DM_VDO_HASH_ZONE_THREADS_MAXIMUM (100)
//#define DM_VDO_LOGICAL_THREADS_MINIMUM (0)
#define DM_VDO_LOGICAL_THREADS_MAXIMUM (100)
//#define DM_VDO_PHYSICAL_THREADS_MINIMUM (0)
#define DM_VDO_PHYSICAL_THREADS_MAXIMUM (16)
#endif // DEVICE_MAPPER_VDO_LIMITS_H

View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2013 Red Hat, Inc. All rights reserved.
* Copyright (C) 2013-2018 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
@ -607,6 +607,112 @@ cfg_runtime(allocation_thin_pool_chunk_size_CFG, "thin_pool_chunk_size", allocat
cfg(allocation_physical_extent_size_CFG, "physical_extent_size", allocation_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_EXTENT_SIZE, vsn(2, 2, 112), NULL, 0, NULL,
"Default physical extent size in KiB to use for new VGs.\n")
#define VDO_1ST_VSN vsn(3, 0, 0)
cfg(allocation_vdo_use_compression_CFG, "vdo_use_compression", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_USE_COMPRESSION, VDO_1ST_VSN, NULL, 0, NULL,
"Enables or disables compression when creating a VDO volume.\n"
"Compression may be disabled if necessary to maximize performance\n"
"or to speed processing of data that is unlikely to compress.\n")
cfg(allocation_vdo_use_deduplication_CFG, "vdo_use_deduplication", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_USE_DEDUPLICATION, VDO_1ST_VSN, NULL, 0, NULL,
"Enables or disables deduplication when creating a VDO volume.\n"
"Deduplication may be disabled in instances where data is not expected\n"
"to have good deduplication rates but compression is still desired.")
cfg(allocation_vdo_emulate_512_sectors_CFG, "vdo_emulate_512_sectors", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_EMULATE_512_SECTORS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies that the VDO volume is to emulate a 512 byte block device.\n")
cfg(allocation_vdo_block_map_cache_size_mb_CFG, "vdo_block_map_cache_size_mb", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_BLOCK_MAP_CACHE_SIZE_MB, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the amount of memory in MiB allocated for caching block map\n"
"pages for VDO volume. The value must be a multiple of 4096 and must be\n"
"at least 128MiB and less than 16TiB. The cache must be at least 16MiB\n"
"per logical thread. Note that there is a memory overhead of 15%.\n")
cfg(allocation_vdo_block_map_period_CFG, "vdo_block_map_period", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_BLOCK_MAP_PERIOD, VDO_1ST_VSN, NULL, 0, NULL,
"Tunes the quantity of block map updates that can accumulate\n"
"before cache pages are flushed to disk. The value must be\n"
"at least 1 and less then 16380.\n"
"A lower value means shorter recovery time but lower performance.\n")
cfg(allocation_vdo_check_point_frequency_CFG, "vdo_check_point_frequency", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_CHECK_POINT_FREQUENCY, VDO_1ST_VSN, NULL, 0, NULL,
"The default check point frequency for VDO volume.\n")
cfg(allocation_vdo_use_sparse_index_CFG, "vdo_use_sparse_index", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_USE_SPARSE_INDEX, VDO_1ST_VSN, NULL, 0, NULL,
"Enables sparse indexing for VDO volume.\n")
cfg(allocation_vdo_index_memory_size_mb_CFG, "vdo_index_memory_size_mb", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_INDEX_MEMORY_SIZE_MB, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the amount of index memory in MiB for VDO volume.\n"
"The value must be at least 256MiB and at most 1TiB.\n")
cfg(allocation_vdo_use_read_cache_CFG, "vdo_use_read_cache", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_USE_READ_CACHE, VDO_1ST_VSN, NULL, 0, NULL,
"Enables or disables the read cache within the VDO volume.\n"
"The cache should be enabled if write workloads are expected\n"
"to have high levels of deduplication, or for read intensive\n"
"workloads of highly compressible data.\n")
cfg(allocation_vdo_read_cache_size_mb_CFG, "vdo_read_cache_size_mb", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_READ_CACHE_SIZE_MB, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the extra VDO volume read cache size in MiB.\n"
"This space is in addition to a system-defined minimum.\n"
"The value must be less then 16TiB and 1.12 MiB of memory\n"
"will be used per MiB of read cache specified, per bio thread.\n")
cfg(allocation_vdo_slab_size_mb_CFG, "vdo_slab_size_mb", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_SLAB_SIZE_MB, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the size in MiB of the increment by which a VDO is grown.\n"
"Using a smaller size constrains the total maximum physical size\n"
"that can be accommodated. Must be a power of two between 128MiB and 32GiB.\n")
cfg(allocation_vdo_ack_threads_CFG, "vdo_ack_threads", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_ACK_THREADS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of threads to use for acknowledging\n"
"completion of requested VDO I/O operations.\n"
"The value must be at in range [0..100].\n")
cfg(allocation_vdo_bio_threads_CFG, "vdo_bio_threads", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_BIO_THREADS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of threads to use for submitting I/O\n"
"operations to the storage device of VDO volume.\n"
"The value must be in range [1..100]\n"
"Each additional thread after the first will use an additional 18MiB of RAM,\n"
"plus 1.12 MiB of RAM per megabyte of configured read cache size.\n")
cfg(allocation_vdo_bio_rotation_CFG, "vdo_bio_rotation", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_BIO_ROTATION, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of I/O operations to enqueue for each bio-submission\n"
"thread before directing work to the next. The value must be in range [1..1024].\n")
cfg(allocation_vdo_cpu_threads_CFG, "vdo_cpu_threads", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_CPU_THREADS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of threads to use for CPU-intensive work such as\n"
"hashing or compression for VDO volume. The value must be in range [1..100]\n")
cfg(allocation_vdo_hash_zone_threads_CFG, "vdo_hash_zone_threads", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_HASH_ZONE_THREADS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of threads across which to subdivide parts of the VDO\n"
"processing based on the hash value computed from the block data.\n"
"The value must be at in range [0..100].\n"
"vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be\n"
"either all zero or all non-zero.")
cfg(allocation_vdo_logical_threads_CFG, "vdo_logical_threads", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_LOGICAL_THREADS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of threads across which to subdivide parts of the VDO\n"
"processing based on the hash value computed from the block data.\n"
"A logical thread count of 9 or more will require explicitly specifying\n"
"a sufficiently large block map cache size, as well.\n"
"The value must be in range [0..100].\n"
"vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be\n"
"either all zero or all non-zero.\n")
cfg(allocation_vdo_physical_threads_CFG, "vdo_physical_threads", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_VDO_PHYSICAL_THREADS, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the number of threads across which to subdivide parts of the VDO\n"
"processing based on physical block addresses.\n"
"Each additional thread after the first will use an additional 10MiB of RAM.\n"
"The value must be in range [0..16].\n"
"vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be\n"
"either all zero or all non-zero.\n")
cfg(allocation_vdo_write_policy_CFG, "vdo_write_policy", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_VDO_WRITE_POLICY, VDO_1ST_VSN, NULL, 0, NULL,
"Specifies the write policy:\n"
"auto - VDO will check the storage device and determine whether it supports flushes.\n"
" If it does, VDO will run in async mode, otherwise it will run in sync mode.\n"
"sync - Writes are acknowledged only after data is stably written.\n"
" This policy is not supported if the underlying storage is not also synchronous.\n"
"async - Writes are acknowledged after data has been cached for writing to stable storage.\n"
" Data which has not been flushed is not guaranteed to persist in this mode.\n")
cfg(log_report_command_log_CFG, "report_command_log", log_CFG_SECTION, CFG_PROFILABLE | CFG_DEFAULT_COMMENTED | CFG_DISALLOW_INTERACTIVE, CFG_TYPE_BOOL, DEFAULT_COMMAND_LOG_REPORT, vsn(2, 2, 158), NULL, 0, NULL,
"Enable or disable LVM log reporting.\n"
"If enabled, LVM will collect a log of operations, messages,\n"
@ -1019,6 +1125,13 @@ cfg_array(global_cache_check_options_CFG, "cache_check_options", global_CFG_SECT
cfg_array(global_cache_repair_options_CFG, "cache_repair_options", global_CFG_SECTION, CFG_ALLOW_EMPTY | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_CACHE_REPAIR_OPTIONS_CONFIG, vsn(2, 2, 108), NULL, 0, NULL,
"List of options passed to the cache_repair command.\n")
cfg(global_vdo_format_executable_CFG, "vdo_format_executable", global_CFG_SECTION, CFG_ALLOW_EMPTY | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, VDO_FORMAT_CMD, VDO_1ST_VSN, "@VDO_FORMAT_CMD@", 0, NULL,
"The full path to the vdoformat command.\n"
"LVM uses this command to initial data volume for VDO type logical volume\n")
cfg_array(global_vdo_format_options_CFG, "vdo_format_options", global_CFG_SECTION, CFG_ALLOW_EMPTY | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_VDO_FORMAT_OPTIONS_CONFIG, VDO_1ST_VSN, NULL, 0, NULL,
"List of options passed added to standard vdoformat command.\n")
cfg(global_fsadm_executable_CFG, "fsadm_executable", global_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_FSADM_PATH, vsn(2, 2, 170), "@FSADM_PATH@", 0, NULL,
"The full path to the fsadm command.\n"
"LVM uses this command to help with lvresize -r operations.\n")

View File

@ -16,6 +16,8 @@
#ifndef _LVM_DEFAULTS_H
#define _LVM_DEFAULTS_H
#include "device_mapper/vdo/vdo_limits.h"
#define DEFAULT_PE_ALIGN 2048
#define DEFAULT_PE_ALIGN_OLD 128
@ -134,6 +136,37 @@
#define DEFAULT_CACHE_METADATA_FORMAT CACHE_METADATA_FORMAT_UNSELECTED /* Autodetect */
#define DEFAULT_CACHE_MODE "writethrough"
/* VDO defaults */
#define DEFAULT_VDO_USE_COMPRESSION (true)
#define DEFAULT_VDO_USE_DEDUPLICATION (true)
#define DEFAULT_VDO_EMULATE_512_SECTORS (false)
#define DEFAULT_VDO_BLOCK_MAP_CACHE_SIZE_MB (DM_VDO_BLOCK_MAP_CACHE_SIZE_MINIMUM_MB)
#define DEFAULT_VDO_BLOCK_MAP_PERIOD (DM_VDO_BLOCK_MAP_PERIOD_MAXIMUM)
#define DEFAULT_VDO_USE_SPARSE_INDEX (false)
#define DEFAULT_VDO_CHECK_POINT_FREQUENCY (0)
#define DEFAULT_VDO_INDEX_MEMORY_SIZE_MB (DM_VDO_INDEX_MEMORY_SIZE_MINIMUM_MB)
#define DEFAULT_VDO_USE_READ_CACHE (false)
#define DEFAULT_VDO_READ_CACHE_SIZE_MB (0)
#define DEFAULT_VDO_SLAB_SIZE_MB (2 * 1024) // 2GiB ... 19 slabbits
#define DEFAULT_VDO_ACK_THREADS (1)
#define DEFAULT_VDO_BIO_THREADS (1)
#define DEFAULT_VDO_BIO_ROTATION (64)
#define DEFAULT_VDO_CPU_THREADS (2)
#define DEFAULT_VDO_HASH_ZONE_THREADS (1)
#define DEFAULT_VDO_LOGICAL_THREADS (1)
#define DEFAULT_VDO_PHYSICAL_THREADS (1)
#define DEFAULT_VDO_WRITE_POLICY "auto"
#define DEFAULT_VDO_FORMAT_OPTIONS_CONFIG "#S" ""
/*
* VDO pool will reverve some sectors in the front and the back of pool device to avoid
* seeing same device twice in the system.
*/
#define DEFAULT_VDO_POOL_HEADER_SIZE (1024) // 512KiB
#define DEFAULT_FSADM_PATH FSADM_PATH
#define DEFAULT_UMASK 0077