make: generate

conf/example.conf.in

@@ -1192,6 +1192,16 @@ global {
 	# This configuration option has an automatic default value.
 	# sanlock_lv_extend = 256
 
+	# Configuration option global/sanlock_align_size.
+	# The sanlock lease size in MiB to use on disks with a 4K sector size.
+	# Possible values are 1,2,4,8.  The default is 8, which supports up to
+	# 2000 hosts (and max host_id 2000.)  Smaller values support smaller
+	# numbers of max hosts (and max host_ids): 250, 500, 1000, 2000 for
+	# lease sizes 1,2,4,8.  Disks with 512 byte sectors always use 1MiB
+	# leases and support 2000 hosts, and are not affected by this setting.
+	# This configuration option has an automatic default value.
+	# sanlock_align_size = 8
+
 	# Configuration option global/lvmlockctl_kill_command.
 	# The command that lvmlockctl --kill should use to force LVs offline.
 	# The lvmlockctl --kill command is run when a shared VG has lost
@@ -1495,12 +1505,14 @@ activation {
 	# Configuration option activation/reserved_stack.
 	# Stack size in KiB to reserve for use while devices are suspended.
 	# Insufficient reserve risks I/O deadlock during device suspension.
+	# Value 0 disables memory locking.
 	# This configuration option has an automatic default value.
 	# reserved_stack = 64
 
 	# Configuration option activation/reserved_memory.
 	# Memory size in KiB to reserve for use while devices are suspended.
 	# Insufficient reserve risks I/O deadlock during device suspension.
+	# Value 0 disables memory locking.
 	# This configuration option has an automatic default value.
 	# reserved_memory = 8192
 

conf/lvmlocal.conf.in

@@ -49,9 +49,10 @@ local {
 	# This configuration option does not have a default value defined.
 
 	# Configuration option local/host_id.
-	# The lvmlockd sanlock host_id.
-	# This must be unique among all hosts, and must be between 1 and 2000.
-	# Applicable only if LVM is compiled with lockd support
+	# The sanlock host_id used by lvmlockd. This must be unique among all the hosts
+	# using shared VGs with sanlock. Accepted values are 1-2000, except when sanlock_align_size
+	# is configured to 1, 2 or 4, which correspond to max host_id values of 250, 500, or 1000.
+	# Applicable only if LVM is compiled with support for lvmlockd+sanlock.
 	# This configuration option has an automatic default value.
 	# host_id = 0
 }

man/lvchange.8_pregen

@@ -832,7 +832,7 @@ a suitable value automatically.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--rebuild\fP \fIPV\fP

man/lvdisplay.8_pregen

@@ -325,7 +325,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--segments\fP

man/lvm-fullreport.8_pregen

@@ -311,7 +311,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP

man/lvmdiskscan.8_pregen

@@ -182,7 +182,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB-t\fP|\fB--test\fP

man/lvs.8_pregen

@@ -321,7 +321,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP

man/lvscan.8_pregen

@@ -200,7 +200,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP

man/pvdisplay.8_pregen

@@ -315,7 +315,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP

man/pvs.8_pregen

@@ -319,7 +319,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP

man/vgcfgbackup.8_pregen

@@ -217,7 +217,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP

man/vgchange.8_pregen

@@ -777,7 +777,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--refresh\fP

man/vgdisplay.8_pregen

@@ -305,7 +305,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB-S\fP|\fB--select\fP \fIString\fP

man/vgs.8_pregen

@@ -308,7 +308,7 @@ Repeat once to also suppress any prompts with answer 'no'.
 \fB--readonly\fP
 .br
 Prevent the command from making changes, including activation and
-metadata updates.
+metadata updates.  (See --permission r for read only LVs.)
 .
 .HP
 \fB--reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP