From 698abdde165a3e747b81f18cf3405f2d4abb5bae Mon Sep 17 00:00:00 2001 From: David Teigland Date: Fri, 10 Feb 2017 16:20:19 -0600 Subject: [PATCH] generate man pages --- configure.in | 2 + doc/license.txt | 14 + man/Makefile.in | 39 +- man/clvmd.8.in | 26 + man/lvchange.8.des | 2 + man/lvchange.8.end | 6 + man/lvchange.8.in | 491 ------------ man/lvconvert.8.des | 32 + man/lvconvert.8.end | 95 +++ man/lvconvert.8.in | 1199 ----------------------------- man/lvcreate.8.des | 28 + man/lvcreate.8.end | 98 +++ man/lvcreate.8.in | 914 ---------------------- man/lvdisplay.8.des | 5 + man/lvdisplay.8.in | 134 ---- man/lvextend.8.des | 5 + man/lvextend.8.end | 16 + man/lvextend.8.in | 134 ---- man/lvm-config.8.des | 5 + man/lvm-config.8.in | 1 - man/lvm-dumpconfig.8.des | 5 + man/lvm-dumpconfig.8.in | 1 - man/lvm-fullreport.8.des | 6 + man/lvm-fullreport.8.in | 145 ---- man/lvm-lvpoll.8.des | 4 + man/lvm-lvpoll.8.end | 33 + man/lvm-lvpoll.8.in | 89 --- man/lvmchange.8.in | 10 - man/lvmconfig.8.des | 3 + man/lvmconfig.8.in | 225 ------ man/lvmdiskscan.8.des | 7 + man/lvmdiskscan.8.in | 27 - man/lvmlockd.8.in | 36 +- man/lvmsadc.8.des | 3 + man/lvmsadc.8.in | 16 - man/lvmsar.8.des | 3 + man/lvmsar.8.in | 16 - man/lvreduce.8.des | 14 + man/lvreduce.8.end | 5 + man/lvreduce.8.in | 110 --- man/lvremove.8.des | 22 + man/lvremove.8.end | 11 + man/lvremove.8.in | 80 -- man/lvrename.8.des | 2 + man/lvrename.8.end | 10 + man/lvrename.8.in | 51 -- man/lvresize.8.des | 2 + man/lvresize.8.end | 6 + man/lvresize.8.in | 124 --- man/lvs.8.des | 1 + man/lvs.8.end | 75 ++ man/lvs.8.in | 290 ------- man/lvscan.8.des | 5 + man/lvscan.8.in | 52 -- man/pvchange.8.des | 1 + man/pvchange.8.end | 6 + man/pvchange.8.in | 59 -- man/pvck.8.des | 1 + man/pvck.8.end | 8 + man/pvck.8.in | 37 - man/pvcreate.8.des | 18 + man/pvcreate.8.end | 13 + man/pvcreate.8.in | 210 ----- man/pvdisplay.8.des | 5 + man/pvdisplay.8.in | 109 --- man/pvmove.8.des | 61 ++ man/pvmove.8.end | 46 ++ man/pvmove.8.in | 187 ----- man/pvremove.8.des | 2 + man/pvremove.8.in | 37 - man/pvresize.8.des | 2 + man/pvresize.8.end | 16 + man/pvresize.8.in | 56 -- man/pvs.8.des | 1 + man/pvs.8.end | 11 + man/pvs.8.in | 153 ---- man/{pvscan.8.in => pvscan.8.des} | 83 +- man/see_also.end | 67 ++ man/vgcfgbackup.8.des | 16 + man/vgcfgbackup.8.in | 36 - man/vgcfgrestore.8.des | 8 + man/vgcfgrestore.8.end | 9 + man/vgcfgrestore.8.in | 58 -- man/vgchange.8.des | 2 + man/vgchange.8.end | 16 + man/vgchange.8.in | 346 --------- man/vgck.8.des | 1 + man/vgck.8.in | 22 - man/vgconvert.8.des | 7 + man/vgconvert.8.in | 48 -- man/vgcreate.8.des | 4 + man/vgcreate.8.end | 6 + man/vgcreate.8.in | 187 ----- man/vgdisplay.8.des | 4 + man/vgdisplay.8.in | 123 --- man/vgexport.8.des | 8 + man/vgexport.8.in | 37 - man/vgextend.8.des | 11 + man/vgextend.8.end | 6 + man/vgextend.8.in | 71 -- man/vgimport.8.des | 5 + man/vgimport.8.in | 38 - man/vgimportclone.8.des | 6 + man/vgimportclone.8.end | 9 + man/vgimportclone.8.in | 46 -- man/vgmerge.8.des | 3 + man/vgmerge.8.end | 7 + man/vgmerge.8.in | 41 - man/vgmknodes.8.des | 5 + man/vgmknodes.8.in | 30 - man/vgreduce.8.des | 1 + man/vgreduce.8.in | 49 -- man/vgremove.8.des | 6 + man/vgremove.8.in | 46 -- man/vgrename.8.des | 9 + man/vgrename.8.end | 10 + man/vgrename.8.in | 58 -- man/vgs.8.des | 1 + man/vgs.8.end | 17 + man/vgs.8.in | 161 ---- man/vgscan.8.des | 1 + man/vgscan.8.in | 43 -- man/vgsplit.8.des | 13 + man/vgsplit.8.in | 80 -- tools/Makefile.in | 1 - 125 files changed, 1056 insertions(+), 6580 deletions(-) create mode 100644 doc/license.txt create mode 100644 man/lvchange.8.des create mode 100644 man/lvchange.8.end delete mode 100644 man/lvchange.8.in create mode 100644 man/lvconvert.8.des create mode 100644 man/lvconvert.8.end delete mode 100644 man/lvconvert.8.in create mode 100644 man/lvcreate.8.des create mode 100644 man/lvcreate.8.end delete mode 100644 man/lvcreate.8.in create mode 100644 man/lvdisplay.8.des delete mode 100644 man/lvdisplay.8.in create mode 100644 man/lvextend.8.des create mode 100644 man/lvextend.8.end delete mode 100644 man/lvextend.8.in create mode 100644 man/lvm-config.8.des delete mode 100644 man/lvm-config.8.in create mode 100644 man/lvm-dumpconfig.8.des delete mode 100644 man/lvm-dumpconfig.8.in create mode 100644 man/lvm-fullreport.8.des delete mode 100644 man/lvm-fullreport.8.in create mode 100644 man/lvm-lvpoll.8.des create mode 100644 man/lvm-lvpoll.8.end delete mode 100644 man/lvm-lvpoll.8.in delete mode 100644 man/lvmchange.8.in create mode 100644 man/lvmconfig.8.des delete mode 100644 man/lvmconfig.8.in create mode 100644 man/lvmdiskscan.8.des delete mode 100644 man/lvmdiskscan.8.in create mode 100644 man/lvmsadc.8.des delete mode 100644 man/lvmsadc.8.in create mode 100644 man/lvmsar.8.des delete mode 100644 man/lvmsar.8.in create mode 100644 man/lvreduce.8.des create mode 100644 man/lvreduce.8.end delete mode 100644 man/lvreduce.8.in create mode 100644 man/lvremove.8.des create mode 100644 man/lvremove.8.end delete mode 100644 man/lvremove.8.in create mode 100644 man/lvrename.8.des create mode 100644 man/lvrename.8.end delete mode 100644 man/lvrename.8.in create mode 100644 man/lvresize.8.des create mode 100644 man/lvresize.8.end delete mode 100644 man/lvresize.8.in create mode 100644 man/lvs.8.des create mode 100644 man/lvs.8.end delete mode 100644 man/lvs.8.in create mode 100644 man/lvscan.8.des delete mode 100644 man/lvscan.8.in create mode 100644 man/pvchange.8.des create mode 100644 man/pvchange.8.end delete mode 100644 man/pvchange.8.in create mode 100644 man/pvck.8.des create mode 100644 man/pvck.8.end delete mode 100644 man/pvck.8.in create mode 100644 man/pvcreate.8.des create mode 100644 man/pvcreate.8.end delete mode 100644 man/pvcreate.8.in create mode 100644 man/pvdisplay.8.des delete mode 100644 man/pvdisplay.8.in create mode 100644 man/pvmove.8.des create mode 100644 man/pvmove.8.end delete mode 100644 man/pvmove.8.in create mode 100644 man/pvremove.8.des delete mode 100644 man/pvremove.8.in create mode 100644 man/pvresize.8.des create mode 100644 man/pvresize.8.end delete mode 100644 man/pvresize.8.in create mode 100644 man/pvs.8.des create mode 100644 man/pvs.8.end delete mode 100644 man/pvs.8.in rename man/{pvscan.8.in => pvscan.8.des} (68%) create mode 100644 man/see_also.end create mode 100644 man/vgcfgbackup.8.des delete mode 100644 man/vgcfgbackup.8.in create mode 100644 man/vgcfgrestore.8.des create mode 100644 man/vgcfgrestore.8.end delete mode 100644 man/vgcfgrestore.8.in create mode 100644 man/vgchange.8.des create mode 100644 man/vgchange.8.end delete mode 100644 man/vgchange.8.in create mode 100644 man/vgck.8.des delete mode 100644 man/vgck.8.in create mode 100644 man/vgconvert.8.des delete mode 100644 man/vgconvert.8.in create mode 100644 man/vgcreate.8.des create mode 100644 man/vgcreate.8.end delete mode 100644 man/vgcreate.8.in create mode 100644 man/vgdisplay.8.des delete mode 100644 man/vgdisplay.8.in create mode 100644 man/vgexport.8.des delete mode 100644 man/vgexport.8.in create mode 100644 man/vgextend.8.des create mode 100644 man/vgextend.8.end delete mode 100644 man/vgextend.8.in create mode 100644 man/vgimport.8.des delete mode 100644 man/vgimport.8.in create mode 100644 man/vgimportclone.8.des create mode 100644 man/vgimportclone.8.end delete mode 100644 man/vgimportclone.8.in create mode 100644 man/vgmerge.8.des create mode 100644 man/vgmerge.8.end delete mode 100644 man/vgmerge.8.in create mode 100644 man/vgmknodes.8.des delete mode 100644 man/vgmknodes.8.in create mode 100644 man/vgreduce.8.des delete mode 100644 man/vgreduce.8.in create mode 100644 man/vgremove.8.des delete mode 100644 man/vgremove.8.in create mode 100644 man/vgrename.8.des create mode 100644 man/vgrename.8.end delete mode 100644 man/vgrename.8.in create mode 100644 man/vgs.8.des create mode 100644 man/vgs.8.end delete mode 100644 man/vgs.8.in create mode 100644 man/vgscan.8.des delete mode 100644 man/vgscan.8.in create mode 100644 man/vgsplit.8.des delete mode 100644 man/vgsplit.8.in diff --git a/configure.in b/configure.in index 8ec65c8c6..55bc0be1d 100644 --- a/configure.in +++ b/configure.in @@ -86,6 +86,8 @@ AC_PROG_RANLIB AC_PATH_TOOL(CFLOW_CMD, cflow) AC_PATH_TOOL(CSCOPE_CMD, cscope) AC_PATH_TOOL(CHMOD, chmod) +AC_PATH_TOOL(WC, wc) +AC_PATH_TOOL(SORT, sort) ################################################################################ dnl -- Check for header files. diff --git a/doc/license.txt b/doc/license.txt new file mode 100644 index 000000000..5ba3e66d4 --- /dev/null +++ b/doc/license.txt @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved. + * Copyright (C) 2004-2017 Red Hat, Inc. All rights reserved. + * + * This file is part of LVM2. + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU Lesser General Public License v.2.1. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ diff --git a/man/Makefile.in b/man/Makefile.in index 471cac35a..ca2249c2f 100644 --- a/man/Makefile.in +++ b/man/Makefile.in @@ -31,18 +31,20 @@ LVMRAIDMAN = lvmraid.7 MAN5=lvm.conf.5 MAN7=lvmsystemid.7 lvmreport.7 -MAN8=lvm-config.8 lvm-dumpconfig.8 lvm-fullreport.8 lvm-lvpoll.8 \ - lvchange.8 lvmconfig.8 lvconvert.8 lvcreate.8 lvdisplay.8 lvextend.8 \ - lvm.8 lvmchange.8 lvmconf.8 lvmdiskscan.8 lvmdump.8 lvmsadc.8 lvmsar.8 \ +MAN8=lvm.8 lvmconf.8 lvmdump.8 +MAN8DM=dmsetup.8 dmstats.8 +MAN8CLUSTER= +MAN8SYSTEMD_GENERATORS=lvm2-activation-generator.8 + +MAN8GEN=lvm-config.8 lvm-dumpconfig.8 lvm-fullreport.8 lvm-lvpoll.8 \ + lvcreate.8 lvchange.8 lvmconfig.8 lvconvert.8 lvdisplay.8 lvextend.8 \ lvreduce.8 lvremove.8 lvrename.8 lvresize.8 lvs.8 \ lvscan.8 pvchange.8 pvck.8 pvcreate.8 pvdisplay.8 pvmove.8 pvremove.8 \ pvresize.8 pvs.8 pvscan.8 vgcfgbackup.8 vgcfgrestore.8 vgchange.8 \ vgck.8 vgcreate.8 vgconvert.8 vgdisplay.8 vgexport.8 vgextend.8 \ vgimport.8 vgimportclone.8 vgmerge.8 vgmknodes.8 vgreduce.8 vgremove.8 \ - vgrename.8 vgs.8 vgscan.8 vgsplit.8 -MAN8DM=dmsetup.8 dmstats.8 -MAN8CLUSTER= -MAN8SYSTEMD_GENERATORS=lvm2-activation-generator.8 + vgrename.8 vgs.8 vgscan.8 vgsplit.8 \ + lvmsar.8 lvmsadc.8 lvmdiskscan.8 lvmchange.8 ifeq ($(MAKECMDGOALS),all_man) MAN_ALL="yes" @@ -113,8 +115,8 @@ MAN8DIR=$(mandir)/man8 include $(top_builddir)/make.tmpl -CLEAN_TARGETS+=$(MAN5) $(MAN7) $(MAN8) $(MAN8CLUSTER) \ - $(MAN8SYSTEMD_GENERATORS) $(MAN8DM) +CLEAN_TARGETS+=$(MAN5) $(MAN7) $(MAN8) $(MAN8GEN) $(MAN8CLUSTER) \ + $(MAN8SYSTEMD_GENERATORS) $(MAN8DM) *.gen man-generator DISTCLEAN_TARGETS+=$(FSADMMAN) $(BLKDEACTIVATEMAN) $(DMEVENTDMAN) \ $(LVMETADMAN) $(LVMPOLLDMAN) $(LVMLOCKDMAN) $(CLVMDMAN) $(CMIRRORDMAN) \ $(LVMCACHEMAN) $(LVMTHINMAN) $(LVMDBUSDMAN) $(LVMRAIDMAN) @@ -125,11 +127,11 @@ all: man device-mapper device-mapper: $(MAN8DM) -man: $(MAN5) $(MAN7) $(MAN8) $(MAN8CLUSTER) $(MAN8SYSTEMD_GENERATORS) +man: $(MAN5) $(MAN7) $(MAN8) $(MAN8GEN) $(MAN8CLUSTER) $(MAN8SYSTEMD_GENERATORS) all_man: man -$(MAN5) $(MAN7) $(MAN8) $(MAN8DM) $(MAN8CLUSTER): Makefile +$(MAN5) $(MAN7) $(MAN8) $(MAN8GEN) $(MAN8DM) $(MAN8CLUSTER): Makefile Makefile: Makefile.in @: @@ -140,6 +142,18 @@ Makefile: Makefile.in *) echo "Creating $@" ; $(SED) -e "s+#VERSION#+$(LVM_VERSION)+;s+#DEFAULT_SYS_DIR#+$(DEFAULT_SYS_DIR)+;s+#DEFAULT_ARCHIVE_DIR#+$(DEFAULT_ARCHIVE_DIR)+;s+#DEFAULT_BACKUP_DIR#+$(DEFAULT_BACKUP_DIR)+;s+#DEFAULT_PROFILE_DIR#+$(DEFAULT_PROFILE_DIR)+;s+#DEFAULT_CACHE_DIR#+$(DEFAULT_CACHE_DIR)+;s+#DEFAULT_LOCK_DIR#+$(DEFAULT_LOCK_DIR)+;s+#CLVMD_PATH#+@CLVMD_PATH@+;s+#LVM_PATH#+@LVM_PATH@+;s+#DEFAULT_RUN_DIR#+@DEFAULT_RUN_DIR@+;s+#DEFAULT_PID_DIR#+@DEFAULT_PID_DIR@+;s+#SYSTEMD_GENERATOR_DIR#+$(SYSTEMD_GENERATOR_DIR)+;s+#DEFAULT_MANGLING#+$(DEFAULT_MANGLING)+;" $< > $@ ;; \ esac +man-generator: + $(CC) -DMAN_PAGE_GENERATOR -I$(top_builddir)/tools $(CFLAGS) $(top_srcdir)/tools/command.c -o $@ + - ./man-generator lvmconfig > test.gen + if [ ! -s test.gen ] ; then cp genfiles/*.gen $(top_builddir)/man; fi; + +$(MAN8GEN): man-generator + echo "Generating $@" ; + if [ ! -e $@.gen ]; then ./man-generator $(basename $@) $(top_srcdir)/man/$@.des > $@.gen; fi + if [ -f $(top_srcdir)/man/$@.end ]; then cat $(top_srcdir)/man/$@.end >> $@.gen; fi; + cat $(top_srcdir)/man/see_also.end >> $@.gen + $(SED) -e "s+#VERSION#+$(LVM_VERSION)+;s+#DEFAULT_SYS_DIR#+$(DEFAULT_SYS_DIR)+;s+#DEFAULT_ARCHIVE_DIR#+$(DEFAULT_ARCHIVE_DIR)+;s+#DEFAULT_BACKUP_DIR#+$(DEFAULT_BACKUP_DIR)+;s+#DEFAULT_PROFILE_DIR#+$(DEFAULT_PROFILE_DIR)+;s+#DEFAULT_CACHE_DIR#+$(DEFAULT_CACHE_DIR)+;s+#DEFAULT_LOCK_DIR#+$(DEFAULT_LOCK_DIR)+;s+#CLVMD_PATH#+@CLVMD_PATH@+;s+#LVM_PATH#+@LVM_PATH@+;s+#DEFAULT_RUN_DIR#+@DEFAULT_RUN_DIR@+;s+#DEFAULT_PID_DIR#+@DEFAULT_PID_DIR@+;s+#SYSTEMD_GENERATOR_DIR#+$(SYSTEMD_GENERATOR_DIR)+;s+#DEFAULT_MANGLING#+$(DEFAULT_MANGLING)+;" $@.gen > $@ + install_man5: $(MAN5) $(INSTALL) -d $(MAN5DIR) $(INSTALL_DATA) $(MAN5) $(MAN5DIR)/ @@ -148,9 +162,10 @@ install_man7: $(MAN7) $(INSTALL) -d $(MAN7DIR) $(INSTALL_DATA) $(MAN7) $(MAN7DIR)/ -install_man8: $(MAN8) +install_man8: $(MAN8) $(MAN8GEN) $(INSTALL) -d $(MAN8DIR) $(INSTALL_DATA) $(MAN8) $(MAN8DIR)/ + $(INSTALL_DATA) $(MAN8GEN) $(MAN8DIR)/ install_lvm2: install_man5 install_man7 install_man8 diff --git a/man/clvmd.8.in b/man/clvmd.8.in index 9b9310d56..21f8c7dbf 100644 --- a/man/clvmd.8.in +++ b/man/clvmd.8.in @@ -154,6 +154,32 @@ This timeout will be ignored if you start \fBclvmd\fP with the \fB\-d\fP. .br Display the version of the cluster LVM daemon. . +.SH NOTES +. +.SS Activation +. +In a clustered VG, clvmd is used for activation, and the following values are +possible with \fBlvchange/vgchange -a\fP: +.IP \fBy\fP|\fBsy\fP +clvmd activates the LV in shared mode (with a shared lock), +allowing multiple nodes to activate the LV concurrently. +If the LV type prohibits shared access, such as an LV with a snapshot, +an exclusive lock is automatically used instead. +clvmd attempts to activate the LV concurrently on all nodes. +.IP \fBey\fP +clvmd activates the LV in exclusive mode (with an exclusive lock), +allowing a single node to activate the LV. +clvmd attempts to activate the LV concurrently on all nodes, but only +one will succeed. +.IP \fBly\fP +clvmd attempts to activate the LV only on the local node. +If the LV type allows concurrent access, then shared mode is used, +otherwise exclusive. +.IP \fBn\fP +clvmd deactivates the LV on all nodes. +.IP \fBln\fP +clvmd deactivates the LV on the local node. +. .SH ENVIRONMENT VARIABLES .TP .B LVM_CLVMD_BINARY diff --git a/man/lvchange.8.des b/man/lvchange.8.des new file mode 100644 index 000000000..7aa8ce754 --- /dev/null +++ b/man/lvchange.8.des @@ -0,0 +1,2 @@ +lvchange changes LV attributes in the VG, changes LV activation in the +kernel, and includes other utilities for LV maintenance. diff --git a/man/lvchange.8.end b/man/lvchange.8.end new file mode 100644 index 000000000..7134e46cc --- /dev/null +++ b/man/lvchange.8.end @@ -0,0 +1,6 @@ +.SH EXAMPLES + +Change LV permission to read-only: +.sp +.B lvchange \-pr vg00/lvol1 + diff --git a/man/lvchange.8.in b/man/lvchange.8.in deleted file mode 100644 index 8da9f2dd4..000000000 --- a/man/lvchange.8.in +++ /dev/null @@ -1,491 +0,0 @@ -.TH LVCHANGE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- - -.de UNITS -.. - -. -.SH NAME -. -lvchange \(em change attributes of a logical volume -. -.SH SYNOPSIS -. -.ad l -.B lvchange -.RB [ \-a | \-\-activate -.RB [ a ][ e | s | l ]{ y | n }] -.RB [ \-\-activationmode -.RB { complete | degraded | partial }] -.RB [ \-\-addtag -.IR Tag ] -.RB [ \-K | \-\-ignoreactivationskip ] -.RB [ \-k | \-\-setactivationskip -.RB { y | n }] -.RB [ \-\-alloc -.IR AllocationPolicy ] -.RB [ \-A | \-\-autobackup -.RB { y | n }] -.RB [ \-\-rebuild -.IR PhysicalVolume ] -.RB [ \-\-cachemode -.RB { passthrough | writeback | writethrough }] -.RB [ \-\-cachepolicy -.IR Policy ] -.RB [ \-\-cachesettings -.IR Key \fB= Value ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-C | \-\-contiguous -.RB { y | n }] -.RB [ \-d | \-\-debug ] -.RB [ \-\-deltag -.IR Tag ] -.RB [ \-\-detachprofile ] -.RB [ \-\-discards -.RB { ignore | nopassdown | passdown }] -.RB [ \-\-errorwhenfull -.RB { y | n }] -.RB [ \-h | \-? | \-\-help ] -.RB \%[ \-\-ignorelockingfailure ] -.RB \%[ \-\-ignoremonitoring ] -.RB \%[ \-\-ignoreskippedcluster ] -.RB \%[ \-\-metadataprofile -.IR ProfileName ] -.RB [ \-\-monitor -.RB { y | n }] -.RB [ \-\-noudevsync ] -.RB [ \-P | \-\-partial ] -.RB [ \-p | \-\-permission -.RB { r | rw }] -.RB [ \-M | \-\-persistent -.RB { y | n } -.RB [ \-\-major -.IR Major ] -.RB [ \-\-minor -.IR Minor ]] -.RB [ \-\-poll -.RB { y | n }] -.RB [ \-\- [ raid ] maxrecoveryrate -.IR Rate ] -.RB [ \-\- [ raid ] minrecoveryrate -.IR Rate ] -.RB [ \-\- [ raid ] syncaction -.RB { check | repair }] -.RB [ \-\- [ raid ] writebehind -.IR IOCount ] -.RB [ \-\- [ raid ] writemostly -.BR \fIPhysicalVolume [ : { y | n | t }]] -.RB [ \-r | \-\-readahead -.RB { \fIReadAheadSectors | auto | none }] -.RB [ \-\-refresh ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-resync ] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-\-sysinit ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-Z | \-\-zero -.RB { y | n }] -.RI [ LogicalVolumePath ...] -.ad b -. -.SH DESCRIPTION -. -lvchange allows you to change the attributes of a logical volume -including making them known to the kernel ready for use. -. -.SH OPTIONS -. -See \fBlvm\fP(8) for common options. -. -.HP -.BR \-a | \-\-activate -.RB [ a ][ e | s | l ]{ y | n } -.br -Controls the availability of the logical volumes for use. -Communicates with the kernel device-mapper driver via -libdevmapper to activate (\fB\-ay\fP) or deactivate (\fB\-an\fP) the -logical volumes. -.br -Activation of a logical volume creates a symbolic link -\fI/dev/VolumeGroupName/LogicalVolumeName\fP pointing to the device node. -This link is removed on deactivation. -All software and scripts should access the device through -this symbolic link and present this as the name of the device. -The location and name of the underlying device node may depend on -the distribution and configuration (e.g. udev) and might change -from release to release. -.br -If autoactivation option is used (\fB\-aay\fP), -the logical volume is activated only if it matches an item in -the \fBactivation/auto_activation_volume_list\fP -set in \fBlvm.conf\fP(5). -If this list is not set, then all volumes are considered for -activation. The \fB\-aay\fP option should be also used during system -boot so it's possible to select which volumes to activate using -the \fBactivation/auto_activation_volume_list\fP setting. -.br -In a clustered VG, clvmd is used for activation, and the -following options are possible: - -With \fB\-aey\fP, clvmd activates the LV in exclusive mode -(with an exclusive lock), allowing a single node to activate the LV. - -With \fB\-asy\fP, clvmd activates the LV in shared mode -(with a shared lock), allowing multiple nodes to activate the LV concurrently. -If the LV type prohibits shared access, such as an LV with a snapshot, -the '\fBs\fP' option is ignored and an exclusive lock is used. - -With \fB\-ay\fP (no mode specified), clvmd activates the LV in shared mode -if the LV type allows concurrent access, such as a linear LV. -Otherwise, clvmd activates the LV in exclusive mode. - -With \fB\-aey\fP, \fB\-asy\fP, and \fB\-ay\fP, clvmd attempts to activate the LV -on all nodes. If exclusive mode is used, then only one of the -nodes will be successful. - -With \fB\-an\fP, clvmd attempts to deactivate the LV on all nodes. - -With \fB\-aly\fP, clvmd activates the LV only on the local node, and \fB\-aln\fP -deactivates only on the local node. If the LV type allows concurrent -access, then shared mode is used, otherwise exclusive. - -LVs with snapshots are always activated exclusively because they can only -be used on one node at once. - -For local VGs \fB\-ay\fP, \fB\-aey\fP, and \fB\-asy\fP are all equivalent. -. -.HP -.BR \-\-activationmode -.RB { complete | degraded | partial } -.br -The activation mode determines whether logical volumes are allowed to -activate when there are physical volumes missing (e.g. due to a device -failure). \fBcomplete\fP is the most restrictive; allowing only those -logical volumes to be activated that are not affected by the missing -PVs. \fBdegraded\fP allows RAID logical volumes to be activated even if -they have PVs missing. (Note that the "\fImirror\fP" segment type is not -considered a RAID logical volume. The "\fIraid1\fP" segment type should -be used instead.) Finally, \fBpartial\fP allows any logical volume to -be activated even if portions are missing due to a missing or failed -PV. This last option should only be used when performing recovery or -repair operations. \fBdegraded\fP is the default mode. To change it, -modify \fBactivation_mode\fP in \fBlvm.conf\fP(5). -. -.HP -.BR \-K | \-\-ignoreactivationskip -.br -Ignore the flag to skip Logical Volumes during activation. -. -.HP -.BR \-k | \-\-setactivationskip -.RB { y | n } -.br -Controls whether Logical Volumes are persistently flagged to be -skipped during activation. By default, thin snapshot volumes are -flagged for activation skip. To activate such volumes, -an extra \fB\-\-ignoreactivationskip\fP option must be used. -The flag is not applied during deactivation. To see whether -the flag is attached, use \fBlvs\fP(8) command where the state -of the flag is reported within \fBlv_attr\fP bits. -. -.HP -.BR \-\-cachemode -.RB { passthrough | writeback | writethrough } -.br -Specifying a cache mode determines when the writes to a cache LV -are considered complete. When \fBwriteback\fP is specified, a write is -considered complete as soon as it is stored in the cache pool LV. -If \fBwritethough\fP is specified, a write is considered complete only -when it has been stored in the cache pool LV and on the origin LV. -While \fBwritethrough\fP may be slower for writes, it is more -resilient if something should happen to a device associated with the -cache pool LV. With \fBpassthrough\fP mode, all reads are served -from origin LV (all reads miss the cache) and all writes are -forwarded to the origin LV; additionally, write hits cause cache -block invalidates. See \fBlvmcache(7)\fP for more details. -. -.HP -.BR \-\-cachepolicy -.IR Policy , -.BR \-\-cachesettings -.IR Key \fB= Value -.br -Only applicable to cached LVs; see also \fBlvmcache(7)\fP. Sets -the cache policy and its associated tunable settings. In most use-cases, -default values should be adequate. -. -.HP -.BR \-C | \-\-contiguous -.RB { y | n } -.br -Tries to set or reset the contiguous allocation policy for -logical volumes. It's only possible to change a non-contiguous -logical volume's allocation policy to contiguous, if all of the -allocated physical extents are already contiguous. -. -.HP -.BR \-\-detachprofile -.br -Detach any metadata configuration profiles attached to given -Logical Volumes. See \fBlvm.conf\fP(5) for more information -about metadata profiles. -. -.HP -.BR \-\-discards -.RB { ignore | nopassdown | passdown } -.br -Set this to \fBignore\fP to ignore any discards received by a -thin pool Logical Volume. Set to \fBnopassdown\fP to process such -discards within the thin pool itself and allow the no-longer-needed -extents to be overwritten by new data. Set to \fBpassdown\fP (the -default) to process them both within the thin pool itself and to -pass them down the underlying device. -. -.HP -.BR \-\-errorwhenfull -.RB { y | n } -.br -Sets thin pool behavior when data space is exhaused. See -.BR lvcreate (8) -for information. -. -.HP -.BR \-\-ignoremonitoring -.br -Make no attempt to interact with dmeventd unless \fB\-\-monitor\fP -is specified. -Do not use this if dmeventd is already monitoring a device. -. -.HP -.BR \-\-major -.IR Major -.br -Sets the major number. This option is supported only on older systems -(kernel version 2.4) and is ignored on modern Linux systems where major -numbers are dynamically assigned. -. -.HP -.BR \-\-minor -.IR Minor -.br -Set the minor number. -. -.HP -.BR \-\-metadataprofile -.IR ProfileName -.br -Uses and attaches \fIProfileName\fP configuration profile to the logical -volume metadata. Whenever the logical volume is processed next time, -the profile is automatically applied. If the volume group has another -profile attached, the logical volume profile is preferred. -See \fBlvm.conf\fP(5) for more information about metadata profiles. -. -.HP -.BR \-\-monitor -.RB { y | n } -.br -Start or stop monitoring a mirrored or snapshot logical volume with -dmeventd, if it is installed. -If a device used by a monitored mirror reports an I/O error, -the failure is handled according to -\%\fBmirror_image_fault_policy\fP and \fBmirror_log_fault_policy\fP -set in \fBlvm.conf\fP(5). -. -.HP -.BR \-\-noudevsync -.br -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -. -.HP -.BR \-p | \-\-permission -.RB { r | rw } -.br -Change access permission to read-only or read/write. -. -.HP -.BR \-M | \-\-persistent -.RB { y | n } -.br -Set to \fBy\fP to make the minor number specified persistent. -Change of persistent numbers is not supported for pool volumes. -. -.HP -.BR \-\-poll -.RB { y | n } -.br -Without polling a logical volume's backgrounded transformation process -will never complete. If there is an incomplete pvmove or lvconvert (for -example, on rebooting after a crash), use \fB\-\-poll y\fP to restart the -process from its last checkpoint. However, it may not be appropriate to -immediately poll a logical volume when it is activated, use -\fB\-\-poll n\fP to defer and then \fB\-\-poll y\fP to restart the process. -. -.HP -.BR \-\- [ raid ] rebuild -.BR \fIPhysicalVolume -.br -Option can be repeated multiple times. -Selects PhysicalVolume(s) to be rebuild in a RaidLV. -Use this option instead of -.BR \-\-resync -or -.BR \-\- [ raid ] syncaction -\fBrepair\fP in case the PVs with corrupted data are known and their data -should be reconstructed rather than reconstructing default (rotating) data. -.br -E.g. in a raid1 mirror, the master leg on /dev/sda may hold corrupt data due -to a known transient disk error, thus -.br -\fBlvchange --rebuild /dev/sda LV\fP -.br -will request the master leg to be rebuild rather than rebuilding -all other legs from the master. -On a raid5 with rotating data and parity -.br -\fBlvchange --rebuild /dev/sda LV\fP -.br -will rebuild all data and parity blocks in the stripe on /dev/sda. -.HP -.BR \-\- [ raid ] maxrecoveryrate -.BR \fIRate [ b | B | s | S | k | K | m | M | g | G ] -.br -Sets the maximum recovery rate for a RAID logical volume. \fIRate\fP -is specified as an amount per second for each device in the array. -If no suffix is given, then KiB/sec/device is assumed. Setting the -recovery rate to \fB0\fP means it will be unbounded. -. -.HP -.BR \-\- [ raid ] minrecoveryrate -.BR \fIRate [ b | B | s | S | k | K | m | M | g | G ] -.br -Sets the minimum recovery rate for a RAID logical volume. \fIRate\fP -is specified as an amount per second for each device in the array. -If no suffix is given, then KiB/sec/device is assumed. Setting the -recovery rate to \fB0\fP means it will be unbounded. -. -.HP -.BR \-\- [ raid ] syncaction -.RB { check | repair } -.br -This argument is used to initiate various RAID synchronization operations. -The \fBcheck\fP and \fBrepair\fP options provide a way to check the -integrity of a RAID logical volume (often referred to as "scrubbing"). -These options cause the RAID logical volume to -read all of the data and parity blocks in the array and check for any -discrepancies (e.g. mismatches between mirrors or incorrect parity values). -If \fBcheck\fP is used, the discrepancies will be counted but not repaired. -If \fBrepair\fP is used, the discrepancies will be corrected as they are -encountered. The \fBlvs\fP(8) command can be used to show the number of -discrepancies found or repaired. -. -.HP -.BR \-\- [ raid ] writebehind -.IR IOCount -.br -Specify the maximum number of outstanding writes that are allowed to -devices in a RAID1 logical volume that are marked as write-mostly. -Once this value is exceeded, writes become synchronous (i.e. all writes -to the constituent devices must complete before the array signals the -write has completed). Setting the value to zero clears the preference -and allows the system to choose the value arbitrarily. -. -.HP -.BR \-\- [ raid ] writemostly -.BR \fIPhysicalVolume [ : { y | n | t }] -.br -Mark a device in a RAID1 logical volume as write-mostly. All reads -to these drives will be avoided unless absolutely necessary. This keeps -the number of I/Os to the drive to a minimum. The default behavior is to -set the write-mostly attribute for the specified physical volume in the -logical volume. It is possible to also remove the write-mostly flag by -appending a "\fB:n\fP" to the physical volume or to toggle the value by specifying -"\fB:t\fP". The \fB\-\-writemostly\fP argument can be specified more than one time -in a single command; making it possible to toggle the write-mostly attributes -for all the physical volumes in a logical volume at once. -. -.HP -.BR \-r | \-\-readahead -.RB { \fIReadAheadSectors | auto | none } -.br -Set read ahead sector count of this logical volume. -For volume groups with metadata in lvm1 format, this must -be a value between 2 and 120 sectors. -The default value is "\fBauto\fP" which allows the kernel to choose -a suitable value automatically. -"\fBnone\fP" is equivalent to specifying zero. -. -.HP -.BR \-\-refresh -.br -If the logical volume is active, reload its metadata. -This is not necessary in normal operation, but may be useful -if something has gone wrong or if you're doing clustering -manually without a clustered lock manager. -. -.HP -.BR \-\-resync -.br -Forces the complete resynchronization of a mirror. In normal -circumstances you should not need this option because synchronization -happens automatically. Data is read from the primary mirror device -and copied to the others, so this can take a considerable amount of -time - and during this time you are without a complete redundant copy -of your data. -. -.HP -.BR \-\-sysinit -.br -Indicates that \fBlvchange\fP(8) is being invoked from early system -initialisation scripts (e.g. rc.sysinit or an initrd), -before writeable filesystems are available. As such, -some functionality needs to be disabled and this option -acts as a shortcut which selects an appropriate set of options. Currently -this is equivalent to using \fB\-\-ignorelockingfailure\fP, -\fB\-\-ignoremonitoring\fP, \fB\-\-poll n\fP and setting -\fBLVM_SUPPRESS_LOCKING_FAILURE_MESSAGES\fP -environment variable. - -If \fB\-\-sysinit\fP is used in conjunction with -\fBlvmetad\fP(8) enabled and running, -autoactivation is preferred over manual activation via direct lvchange call. -Logical volumes are autoactivated according to -\fBauto_activation_volume_list\fP set in \fBlvm.conf\fP(5). -. -.HP -.BR \-Z | \-\-zero -.RB { y | n } -.br -Set zeroing mode for thin pool. Note: already provisioned blocks from pool -in non-zero mode are not cleared in unwritten parts when setting zero to -\fBy\fP. -. -.SH ENVIRONMENT VARIABLES -. -.TP -.B LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES -Suppress locking failure messages. -. -.SH Examples -. -Changes the permission on volume lvol1 in volume group vg00 to be read-only: -.sp -.B lvchange \-pr vg00/lvol1 -. -.SH SEE ALSO -. -.nh -.BR lvm (8), -.BR lvmetad (8), -.BR lvs (8), -.BR lvcreate (8), -.BR vgchange (8), -.BR lvmcache (7), -.BR lvmthin (7), -.BR lvm.conf (5) diff --git a/man/lvconvert.8.des b/man/lvconvert.8.des new file mode 100644 index 000000000..2aa95a175 --- /dev/null +++ b/man/lvconvert.8.des @@ -0,0 +1,32 @@ +lvconvert changes the LV type and includes utilities for LV data +maintenance. The LV type controls data layout and redundancy. +The LV type is also called the segment type or segtype. + +To display the current LV type, run the command: + +.B lvs \-o name,segtype +.I LV + +The +.B linear +type is equivalent to the +.B striped +type when one stripe exists. +In that case, the types can sometimes be used interchangably. + +In most cases, the +.B mirror +type is deprecated and the +.B raid1 +type should be used. They are both implementations of mirroring. + +In some cases, an LV is a single device mapper (dm) layer above physical +devices. In other cases, hidden LVs (dm devices) are layered between the +visible LV and physical devices. LVs in the middle layers are called sub LVs. +A command run on a visible LV sometimes operates on a sub LV rather than +the specified LV. In other cases, a sub LV must be specified directly on +the command line. + +Sub LVs can be displayed with the command +.B lvs -a + diff --git a/man/lvconvert.8.end b/man/lvconvert.8.end new file mode 100644 index 000000000..fa8cc1db9 --- /dev/null +++ b/man/lvconvert.8.end @@ -0,0 +1,95 @@ +.SH EXAMPLES + +Convert a linear LV to a two-way mirror LV. +.br +.B lvconvert \-\-type mirror \-\-mirrors 1 vg/lvol1 + +Convert a linear LV to a two-way RAID1 LV. +.br +.B lvconvert \-\-type raid1 \-\-mirrors 1 vg/lvol1 + +Convert a mirror LV to use an in\-memory log. +.br +.B lvconvert \-\-mirrorlog core vg/lvol1 + +Convert a mirror LV to use a disk log. +.br +.B lvconvert \-\-mirrorlog disk vg/lvol1 + +Convert a mirror or raid1 LV to a linear LV. +.br +.B lvconvert --type linear vg/lvol1 + +Convert a mirror LV to a raid1 LV with the same number of images. +.br +.B lvconvert \-\-type raid1 vg/lvol1 + +Convert a linear LV to a two-way mirror LV, allocating new extents from specific +PV ranges. +.br +.B lvconvert \-\-mirrors 1 vg/lvol1 /dev/sda:0\-15 /dev/sdb:0\-15 + +Convert a mirror LV to a linear LV, freeing physical extents from a specific PV. +.br +.B lvconvert \-\-type linear vg/lvol1 /dev/sda + +Split one image from a mirror or raid1 LV, making it a new LV. +.br +.B lvconvert \-\-splitmirrors 1 \-\-name lv_split vg/lvol1 + +Split one image from a raid1 LV, and track changes made to the raid1 LV +while the split image remains detached. +.br +.B lvconvert \-\-splitmirrors 1 \-\-trackchanges vg/lvol1 + +Merge an image (that was previously created with \-\-splitmirrors and +\-\-trackchanges) back into the original raid1 LV. +.br +.B lvconvert \-\-mergemirrors vg/lvol1_rimage_1 + +Replace PV /dev/sdb1 with PV /dev/sdf1 in a raid1/4/5/6/10 LV. +.br +.B lvconvert \-\-replace /dev/sdb1 vg/lvol1 /dev/sdf1 + +Replace 3 PVs /dev/sd[b-d]1 with PVs /dev/sd[f-h]1 in a raid1 LV. +.br +.B lvconvert \-\-replace /dev/sdb1 \-\-replace /dev/sdc1 \-\-replace /dev/sdd1 +.RS +.B vg/lvol1 /dev/sd[fgh]1 +.RE + +Replace the maximum of 2 PVs /dev/sd[bc]1 with PVs /dev/sd[gh]1 in a raid6 LV. +.br +.B lvconvert \-\-replace /dev/sdb1 \-\-replace /dev/sdc1 vg/lvol1 /dev/sd[gh]1 + +Convert an LV into a thin LV in the specified thin pool. The existing LV +is used as an external read\-only origin for the new thin LV. +.br +.B lvconvert \-\-type thin \-\-thinpool vg/tpool1 vg/lvol1 + +Convert an LV into a thin LV in the specified thin pool. The existing LV +is used as an external read\-only origin for the new thin LV, and is +renamed "external". +.br +.B lvconvert \-\-type thin \-\-thinpool vg/tpool1 +.RS +.B \-\-originname external vg/lvol1 +.RE + +Convert an LV to a cache pool LV using another specified LV for cache pool +metadata. +.br +.B lvconvert \-\-type cache-pool \-\-poolmetadata vg/poolmeta1 vg/lvol1 + +Convert an LV to a cache LV using the specified cache pool and chunk size. +.br +.B lvconvert \-\-type cache \-\-cachepool vg/cpool1 \-c 128 vg/lvol1 + +Detach and keep the cache pool from a cache LV. +.br +.B lvconvert \-\-splitcache vg/lvol1 + +Detach and remove the cache pool from a cache LV. +.br +.B lvconvert \-\-uncache vg/lvol1 + diff --git a/man/lvconvert.8.in b/man/lvconvert.8.in deleted file mode 100644 index 0becc8a89..000000000 --- a/man/lvconvert.8.in +++ /dev/null @@ -1,1199 +0,0 @@ -.TH LVCONVERT 8 "LVM TOOLS #VERSION#" "Red Hat, Inc" \" -*- nroff -*- -.SH NAME -lvconvert \(em change LV type and other utilities -. -.SH SYNOPSIS - -.B lvconvert -.RI [ OPTION ]... -.IR VolumeGroup / LogicalVolume - -OPTIONS: -.br -.BR \-b , -.BR \-\-background -.br -.BR \-\-cachepolicy -.IR Policy -.br -.BR \-\-cachepool -.IR CachePoolLogicalVolume { Name | Path } -.br -.BR \-\-cachesettings -.IB Key = Value -.br -.BR \-c , -.BR \-\-chunksize -.BR \fIChunkSize [ b | B | s | S | k | K | m | M | g | G ] -.br -.BR \-\-corelog -.br -.BR \-\-discards -.RB { ignore | nopassdown | passdown } -.br -.BR \-i , -.BR \-\-interval -.IR Seconds -.br -.BR \-\-merge -.br -.BR \-\-mirrorlog -.RB { disk | core | mirrored } -.br -.BR \-m , -.BR \-\-mirrors -.IR Number -.br -.BR \-n , -.BR \-\-name -.IR Name -.br -.BR \-\-noudevsync -.br -.BR \-\-originname -.IR NewExternalOriginVolumeName -.br -.BR \-\-poolmetadata -.IR PoolMetadataLogicalVolume { Name | Path } -.br -.BR \-\-poolmetadatasize -.BR \fIPoolMetadataSize [ b | B | s | S | k | K | m | M | g | G ] -.br -.BR \-\-poolmetadataspare -.RB { y | n } -.br -.BR \-r , -.BR \-\-readahead -.RB { \fIReadAheadSectors | auto | none } -.br -.BR \-R , -.BR \-\-regionsize -.IR MirrorLogRegionSize -.br -.BR \-\-repair -.br -.BR \-\-replace -.IR PhysicalVolume -.br -.BR \-\-splitcache -.br -.BR \-\-splitmirrors -.IR Number -.br -.BR \-\-splitsnapshot -.br -.BR \-\-stripes -.IR Number -.br -.BR \-I , -.BR \-\-stripesize -.IR StripeSize -.br -.B \-\-type striped -.br -.B \-\-type snapshot -| -.B \-\-snapshot -| -.B \-s -.br -.B \-\-type mirror -.br -.B \-\-type raid* -.br -.B \-\-type thin -| -.B \-\-thin -| -.B \-T -.br -.B \-\-type cache -| -.B \-\-cache -| -.B \-H -.br -.B \-\-type thin\-pool -.br -.B \-\-type cache\-pool -.br -.BR \-\-thinpool -.IR ThinPoolLogicalVolume { Name | Path } -.br -.BR \-\-trackchanges -.br -.BR \-\-uncache -.br -.BR \-Z , -.BR \-\-zero -.RB { y | n } -.br - -Common options: -.br -.BR \-A , -.BR \-\-alloc -.IR AllocationPolicy -.br -.BR \-f , -.BR \-\-force -.br -.BR \-\-commandprofile -.IR ProfileName -.br -.BR \-h , -.BR \-? , -.BR \-\-help -.br -.BR \-v , -.BR \-\-verbose -.br -.BR \-y , -.BR \-\-yes -.br -.BR \-\-version - - - - -.SH DESCRIPTION - -lvconvert changes the LV type and includes various LV utilities. - -To display the current LV type, run the command: - -.B lvs \-o name,segtype -.IR VG / LV - -To change the LV type, run the command: - -.B lvconvert \-\-type -.I NewType -.IR VG / LV - -.SS LV types - -The LV type is also called the "segment type" or "segtype". - -LVs with the following types can be modified by lvconvert: -.B striped, -.B snapshot, -.B mirror, -.B raid*, -.B thin, -.B cache, -.B thin\-pool, -.B cache\-pool. - -The specific operations available on each LV type are listed below. - -The -.B linear -type is equivalent to the -.B striped -type when one stripe exists. -In that case, the types can sometimes be used interchangably. - -In most cases, the -.B mirror -type is deprecated and the -.B raid1 -type should be used. They are both implementations of mirroring. - -The -.B raid* -type refers to one of many raid levels, e.g. -.B raid1, -.B raid5. - -.SS LV layers - -In some cases, an LV is a single device mapper (dm) layer above physical -devices. In other cases, hidden LVs (dm devices) are layered between the -visible LV and physical devices. LVs in the middle layers are sometimes -called sub LVs. - -Changing the LV type will often change the composition of sub LVs. - -Sub LVs can be displayed with the command -.B lvs -a. - -A command run on a visible LV sometimes operates on a sub LV rather than -the specified LV. These cases are noted below. - -Sometimes a sub LV must be specified directly on the command line, but -this is a non-standard form. These cases may change in the future to -avoid the direct use of hidden LVs. - -.SH COMMANDS - -.SS Operations on a StripedLV with type striped or linear: - -\& - -.B lvconvert \-\-merge -VG/StripedLV -./" FIXME: use --merge-mirror -.br -\[bu] -Merge StripedLV into an LV when it is a previously split mirror. -.br -\[bu] -Options \-\-background, \-\-interval. -.br -\[bu] -See corresponding operation --splitmirrors. - -.B lvconvert \-\-type snapshot -VG/StripedLV VG/SnapshotLV -.br -\[bu] -Recombine StripedLV with SnapshotLV which was previously split. -.br -\[bu] -Options \-\-chunksize, \-\-zero. -.br -\[bu] -See corresponding operation --splitsnapshot. - -.B lvconvert \-\-type thin -VG/StripedLV -.br -\[bu] -Convert StripedLV to type thin with an external origin. -.br -\[bu] -StripedLV becomes a read\-only external origin LV with a new name. -.br -\[bu] -Requires \-\-thinpool to specify the thin pool to use. -.br -\[bu] -Options \-\-originname. - -.B lvconvert \-\-type cache -VG/StripedLV -.br -\[bu] -Convert StripedLV to type cache. -.br -\[bu] -Requires \-\-cachepool to specify the cache pool to use. -.br -\[bu] -Options \-\-cachepolicy, \-\-cachesettings. - -.B lvconvert \-\-type thin\-pool -VG/StripedLV -.br -\[bu] -Convert StripedLV to type thin\-pool. -.br -\[bu] -The StripedLV is used for thin pool data. -.br -\[bu] -Options \-\-chunksize, \-\-discards, \-\-poolmetadata{size,spare}, -.br - \-\-readahead, \-\-zero. - -.B lvconvert \-\-type cache\-pool -VG/StripedLV -.br -\[bu] -Convert StripedLV to type cache\-pool. -.br -\[bu] -Options \-\-chunksize, \-\-poolmetadata{size,spare}. - -.B lvconvert \-\-type mirror -VG/StripedLV -.br -\[bu] -Convert StripedLV to type mirror. -.br -\[bu] -Requires \-\-mirrors to specify the number of mirrors to use. -.br -\[bu] -Options \-\-mirrorlog, \-\-regionsize. - -.B lvconvert \-\-type raid* -VG/StripedLV -.br -\[bu] -Convert StripedLV to type raid*. -.br -\[bu] -Required options depend on the raid level. - -.SS Operations on RaidLV with type raid*: - -\& - -.B lvconvert \-\-mirrors -Number -VG/RaidLV -.br -\[bu] -Change the number of images in raid1 RaidLV. - -.B lvconvert \-\-splitmirrors -Number -VG/RaidLV -.br -\[bu] -Split images from raid1 RaidLV and use them to create a new LV. -.br -\[bu] -Requires \-\-name for the new LV, or the use of \-\-trackchanges. - -.B lvconvert \-\-merge -VG/RaidLV -./" FIXME: use --merge-mirror -.br -\[bu] -Merge RaidLV into an LV when it is a previously split mirror. -.br -\[bu] -Options \-\-background, \-\-interval. -.br -\[bu] -See corresponding operation --splitmirrors. - -.B lvconvert \-\-repair -VG/RaidLV -.br -\[bu] -Options \-\-background, \-\-interval. -.br -\[bu] -Replace failed PVs in RaidLV. - -.B lvconvert \-\-replace -PV -VG/RaidLV -.br -\[bu] -Replace specific PV(s) in a raid* LV with another PV. -.br -\[bu] -The new PV(s) to use can be optionally specified after the LV. -.br -\[bu] -Repeat to replace multiple: \-\-replace PV1 \-\-replace PV2 ... - -.B lvconvert \-\-type snapshot -VG/RaidLV -VG/SnapshotLV -.br -\[bu] -Combine RaidLV with SnapshotLV that was previously split. -.br -\[bu] -Options \-\-chunksize, \-\-zero. -.br -\[bu] -See corresponding operation \-\-splitsnapshot. - -.B lvconvert \-\-type thin -VG/RaidLV -.br -\[bu] -Convert RaidLV to type thin with an external origin. -.br -\[bu] -RaidLV becomes a read\-only external origin LV with a new name. -.br -\[bu] -Requires \-\-thinpool to specify the thin pool to use. -.br -\[bu] -Options \-\-originname. - -.B lvconvert \-\-type cache -VG/RaidLV -.br -\[bu] -Convert RaidLV to type cache. -.br -\[bu] -Requires \-\-cachepool to specify the cache pool to use. -.br -\[bu] -Options \-\-cachepolicy, \-\-cachesettings. - -.B lvconvert \-\-type thin\-pool -VG/RaidLV -.br -\[bu] -Convert RaidLV to type thin\-pool. -.br -\[bu] -The RaidLV is used for thin pool data. -.br -\[bu] -Options \-\-chunksize, \-\-discards, \-\-poolmetadata{size,spare}, -.br - \-\-readahead, \-\-zero. - -.B lvconvert \-\-type cache\-pool -VG/RaidLV -.br -\[bu] -Convert RaidLV to type cache\-pool. -.br -\[bu] -Options \-\-chunksize, \-\-poolmetadata{size,spare}. - -.B lvconvert \-\-type raid* -VG/RaidLV -.br -\[bu] -Convert RaidLV to use a different raid level. -.br -\[bu] -Required options depend on the raid level. - -.B lvconvert \-\-type mirror -VG/RaidLV -.br -\[bu] -Convert RaidLV to type mirror. - -.B lvconvert \-\-type striped -VG/RaidLV -.br -\[bu] -Convert RaidLV to type striped. - -.B lvconvert \-\-type linear -VG/RaidLV -.br -\[bu] -Convert RaidLV to type linear. - -.SS Operations on MirrorLV with type mirror: - -\& - -.B lvconvert \-\-mirrors -Number -VG/MirrorLV -.br -\[bu] -Change the number of images in MirrorLV. - -.B lvconvert \-\-splitmirrors -Number -VG/MirrorLV -.br -\[bu] -Split images from MirrorLV and use them to create a new LV. -.br -\[bu] -Requires \-\-name for the new LV. - -.B lvconvert \-\-mirrorlog -LogType -VG/MirrorLV -.br -\[bu] -Change the type of log used by MirrorLV. - -.B lvconvert \-\-repair -VG/MirrorLV -.br -\[bu] -Options \-\-background, \-\-interval. -.br -\[bu] -Replace failed PVs in MirrorLV. - -.B lvconvert \-\-type linear -VG/MirrorLV -.br -\[bu] -Convert MirrorLV to type linear. - -.B lvconvert \-\-type raid* -VG/MirrorLV -.br -\[bu] -Convert MirrorLV to type raid*. -.br -\[bu] -Required options depend on the raid level. - -.SS Operations on CachePoolLV with type cache\-pool: - -\& - -.B lvconvert \-\-splitcache -VG/CachePoolLV -.br -\[bu] -Split the cache LV from CachePoolLV. -.br -\[bu] -Equivalent to --splitcache on CacheLV. - -.SS Operations on CacheLV with type cache: - -\& - -.B lvconvert \-\-splitcache -VG/CacheLV -.br -\[bu] -Split and keep the cache pool from CacheLV. - -.B lvconvert \-\-uncache -VG/CacheLV -.br -\[bu] -Split and remove the cache pool from CacheLV. - -.B lvconvert \-\-splitmirrors -Number -VG/CacheLV -.br -\[bu] -Split images from the mirrored origin of CacheLV to create a new LV. -.br -\[bu] -Operates on mirror or raid1 sub LV. -.br -\[bu] -Requires \-\-name for the new LV, or the use of \-\-trackchanges. - -.B lvconvert \-\-type thin\-pool -VG/CacheLV -.br -\[bu] -Convert CacheLV to type thin-pool. -.br -\[bu] -The CacheLV is used for thin pool data. -.br -\[bu] -Options \-\-chunksize, \-\-discards, \-\-poolmetadata{size,spare}, -.br - \-\-readahead, \-\-zero. - - -.SS Operations on ThinPoolLV with type thin\-pool: - -\& - -.B lvconvert \-\-splitcache -VG/ThinPoolLV -.br -\[bu] -Split and keep the cache pool from the data portion of ThinPoolLV. -.br -\[bu] -Operates on the data sub LV of the thin pool LV. -.br -\[bu] -The data sub LV of the thin pool must be a cache LV. - -.B lvconvert \-\-uncache -VG/ThinPoolLV -.br -\[bu] -Split and remove the cache pool from the data portion of ThinPoolLV. -.br -\[bu] -Operates on the data sub LV of the thin pool LV. -.br -\[bu] -The data sub LV of the thin pool must be a cache LV. - -.B lvconvert \-\-type cache -VG/ThinPoolLV -.br -\[bu] -Convert the data portion of ThinPoolLV to type cache. -.br -\[bu] -Requires \-\-cachepool to specify the cache pool to use. -.br -\[bu] -Operates on the data sub LV of the thin pool LV. -.br -\[bu] -Options \-\-cachepolicy, \-\-cachesettings. - -.B lvconvert \-\-repair -VG/ThinPoolLV -.br -\[bu] -Repair ThinPoolLV. - -.SS Operations on ThinLV with type thin: - -\& - -.B lvconvert \-\-merge -VG/ThinLV -./" FIXME: use --merge-snapshot -.br -\[bu] -Merge ThinLV into its origin LV. -.br -\[bu] -ThinLV must have been created as a snapshot of another thin LV. -.br -\[bu] -Options \-\-background, \-\-interval. - -.SS Operations on SnapshotLV with type snapshot: - -\& - -.B lvconvert \-\-splitsnapshot -VG/SnapshotLV -.br -\[bu] -Separate COW snapshot SnapshotLV from its origin LV. - -.B lvconvert \-\-merge -VG/SnapshotLV -./" FIXME: use --merge-snapshot -.br -\[bu] -Merge COW snapshot SnapshotLV into its origin. -.br -\[bu] -Options \-\-background, \-\-interval. - -.SH OPTIONS -. -See \fBlvm\fP(8) for common options. -.br -. -.HP -.BR \-b , -.BR \-\-background -.br -If the operation requires polling, this option causes the command to -return before the operation is complete, and polling is done in the -background. -. -.HP -.BR \-\-cachepolicy -.IR Policy -.br -Specifies the cache policy for a cache LV. Also see -.BR lvmcache (7). -. -.HP -.BR \-\-cachepool -.IR CachePoolLogicalVolume { Name | Path } -.br -Specifies the cache pool to use when converting an LV to a cache LV. If -CachePoolLogicalVolume is not yet a cache pool, the command will attempt -to convert it into a cache pool prior to the cache LV conversion. -Also see -.BR lvmcache (7). -. -.HP -.BR \-\-cachesettings -.IB Key = Value -.br -Specifies tunable values for a cache LV. (The default values should -usually be adequate.) The special string value \fBdefault\fP switches -settings back to their default kernel values and removes them from the -list of settings stored in LVM metadata. -Also see -.BR lvmcache (7). -. -.HP -.BR \-c , -.BR \-\-chunksize -.BR \fIChunkSize [ b | B | s | S | k | K | m | M | g | G ] -.br -Sets the chunk size for a snapshot, cache pool or thin pool. -The default unit is in kilobytes. -.sp -For snapshots, the value must be a power of 2 between 4KiB and 512KiB -and the default value is 4. -.sp -For a cache pool the value must be between 32KiB and 1GiB and -the default value is 64. -.sp -For a thin pool the value must be between 64KiB and -1GiB and the default value starts with 64 and scales -up to fit the pool metadata size within 128MiB, -if the pool metadata size is not specified. -The value must be a multiple of 64KiB. -(Early kernel support until thin target version 1.4 required the value -to be a power of 2. Discards were not supported for non-power of 2 values -until thin target version 1.5.) -. -.HP -.BR \-\-corelog -.br -Specifies or changes the log type for a mirror LV. -It is an alias for \fB\-\-mirrorlog core\fP. -(This option does not apply to the \fBraid1\fP LV type.) -. -.HP -.BR \-\-discards -.RB { ignore | nopassdown | passdown } -.br -Specifies if discards will be processed by the thin layer in the -kernel and passed down to the Physical Volume. This applies only -to thin pools. The default is \fBpassdown\fP. -Also see -.BR lvmthin (7). -. -.HP -.BR \-H , -.BR \-\-cache -.br -Alias for -.B \-\-type cache. -See COMMANDS description for -.br -.B lvconvert \-\-type cache. -. -.HP -.BR \-i , -.BR \-\-interval -.IR Seconds -.br -Report progress as a percentage at regular intervals. -. -.HP -.BR \-\-merge -.br -Merges a snapshot that was split from an origin LV using -\fB\-\-splitsnapshot\fP, back into the origin LV. - -Merges a raid1 image that was split from a raid1 LV using -\fB\-\-splitsnapshot\fP and \fB\-\-trackchanges\fP, back into -the original raid1 LV. - -To check if the kernel supports the snapshot merge feature, look for -"snapshot\-merge" in the output of \fBdmsetup targets\fP. - -When merging a snapshot, if both the origin and snapshot LVs are not open, -the merge will start immediately. Otherwise, the merge will start the -first time either the origin or snapshot LV are activated and both are -closed. Merging a snapshot into an origin that cannot be closed, for -example a root filesystem, is deferred until the next time the origin -volume is activated. When merging starts, the resulting LV will have the -origin's name, minor number and UUID. While the merge is in progress, -reads or writes to the origin appear as being directed to the snapshot -being merged. When the merge finishes, the merged snapshot is removed. -Multiple snapshots may be specified on the command line or a @tag may be -used to specify multiple snapshots be merged to their respective origin. -. -.HP -.BR \-\-mirrorlog -.RB { disk | core | mirrored } -.br -Specifies or changes the log type for a mirror LV. -The default is \fBdisk\fP, which is persistent and requires -a small amount of storage space, usually on a separate device -from the data being mirrored. -\fBCore\fP may be useful for short-lived mirrors. It means the mirror is -regenerated by copying the data from the first device again every -time the device is activated - e.g. possibly after every reboot. -Using \fBmirrored\fP will create a persistent log that is itself mirrored. -(This option does not apply to the \fBraid1\fP LV type.) -. -.HP -.BR \-m , -.BR \-\-mirrors -.IR Number -.br -Specifies the number mirror images in addition to the original LV image, -e.g. \fB\-\-mirrors 1\fP means two copies of the data, the original and -one mirror image. - -The current maximum is 9 providing 10 raid1 images. - -This option is required when converting an LV to a \fBraid1\fP or -\fBmirror\fP LV. - -This option can be used alone to change the number of mirror images in an -existing \fBraid1\fP or \fBmirror\fP LV. - -The special case \fB\-\-mirrors 0\fP has been used historically to -indicate a linear LV with no mirror images. -. -.HP -.BR \-n , -.BR \-\-name -.IR Name -.br -Specifies the name to use when the command is creating a new LV, e.g. -.B \-\-splitmirrors. -. -.HP -.BR \-\-noudevsync -.br -Disables udev synchronisation. The process will not wait for notification -from udev. It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running or has -rules that ignore the devices LVM creates. -. -.HP -.BR \-\-originname -.IR NewExternalOriginVolumeName -.br -Specifies the name to use for the external origin LV when converting an LV -to a thin LV. The LV being converted becomes a read\-only external origin -with this name. -.br -Without this option, the default name of "lvol" will be generated where - is the LVM internal number of the LV. -.br -. -.\" .HP -.\" .BR \-\-pooldatasize -.\" .IR PoolDataVolumeSize [ \fBbBsSkKmMgGtTpPeE ] -.\" .br -.\" Sets the size of pool's data logical volume. -.\" The option \fB\-\-size\fP could be still used with thin pools. -. -.HP -.BR \-\-poolmetadata -.IR PoolMetadataLogicalVolume { Name | Path } -.br -Specifies the LV to use for thin pool metadata when converting an LV to a -thin pool LV. -.br -Specifies the LV to use for cache pool metadata when converting an LV to a -cache pool LV. -.br -The size should be between 2MiB and 16GiB. -.br -(This option can also be used when a thin pool or cache pool are created -as an auxiliary operation within a different command.) -Also see -.BR lvmthin (7), -and -.BR lvmcache (7). -. -.HP -.BR \-\-poolmetadatasize -.BR \fIPoolMetadataSize [ b | B | s | S | k | K | m | M | g | G ] -.br -Specifies the size of a cache pool metadata LV or a thin pool metadata LV. -This is used if a command creates a pool metadata LV automatically as part -of the operation. This option is not used when an existing LV is -specified as the pool metadata LV, i.e. \fB\-\-poolmetadata\fP. -The default unit is megabytes. -Also see -.BR lvmthin (7), -and -.BR lvmcache (7). -. -.HP -.BR \-\-poolmetadataspare -.RB { y | n } -.br -Specifies if a spare pool metadata LV should be created. -A spare pool metadata LV will be used for pool repair. -Only one spare pool metadata LV is maintained within a VG, with the size -of the largest existing pool metadata LV. -The default is \fBy\fPes. -. -.HP -.BR \-r , -.BR \-\-readahead -.RB { \fIReadAheadSectors | auto | none } -.br -Specifies the read ahead sector count of a thin pool metadata LV. -The default value is \fBauto\fP which allows the kernel to choose -a suitable value automatically. -\fBNone\fP is equivalent to specifying zero. -. -.HP -.BR \-R , -.BR \-\-regionsize -.IR MirrorLogRegionSize -.br -A mirror LV is divided into regions of this size (in MB), and the mirror -log uses this granularity to track which regions are in sync. -(This option does not apply to the \fBraid1\fP LV type.) -. -.HP -.BR \-\-repair -.br -Replaces failed PVs in a raid1 or mirror LV with other PVs available in -the VG. By default, the original number of mirror images will be restored -if possible. Specify \fB\-y\fP on the command line to skip the prompts. -Use \fB\-f\fP if you do not want any replacement. You may use -\fB\-\-use\-policies\fP to use the device replacement policy specified in -\fBlvm.conf\fP(5), see \fBactivation/mirror_log_fault_policy\fP or -\fBactivation/mirror_device_fault_policy\fP. - -When used with a thin pool LV, this option automates the use of the -\fBthin_repair\fP(8) tool on the thin pool. This repairs a very limitted -number of problems. Only inactive thin pools can be repaired. There is -no validation of metadata between kernel and LVM. This requires further -manual work. After successfull repair the old unmodified metadata are -still available in "_meta" LV. -Also see -.BR lvmthin (7). -. -.HP -.BR \-\-replace -.IR PhysicalVolume -.br -Remove the specified device \fIPhysicalVolume\fP and replace it with one -that is available in the VG, or from a specific list of PVs specified on -the command line following the LV name. This option may be repeated multiple -times depending on the RaidLV type. -. -.HP -.BR \-s , -.BR \-\-snapshot -.br -Alias for -.B \-\-type snapshot. -See COMMANDS description for -.br -.B lvconvert \-\-type snapshot. -.HP -.BR \-\-split -.br -Separates \fISplitableLogicalVolume\fP. -This option tries to detect the necessary split operation from its arguments. -Avoid using this option and use one of the following instead: -.B \-\-splitcache, \-\-splitmirrors, \-\-splitsnapshot. -. -.HP -.BR \-\-splitcache -.br -Separates a cache pool from a cache LV, and keeps the unused cache pool -LV. Before the separation, the cache is flushed. See similar option -.B \-\-uncache. -Also see -.BR lvmcache (7). -. -.HP -.BR \-\-splitmirrors -.IR Number -.br -Splits the specified number of images from a \fBraid1\fP or \fBmirror\fP -LV and uses them to create a new LV. - -If \fB\-\-trackchanges\fP is also specified, changes to the raid1 LV are -tracked while the split LV remains detached. -.B lvconvert \-\-merge -can be used to recombine the split images with the original raid1 LV. - -A name can be specified for the new LV with \fB\-\-name\fP (a name is -required without \fB\-\-trackchanges\fP). -. -.HP -.BR \-\-splitsnapshot -.br -Separates a COW snapshot from its origin LV. The LV that is split off -contains the chunks that differ from the origin LV along with metadata -describing them. This LV can be wiped and then destroyed with lvremove. -See corresponding operation -.B lvconvert \-\-type snapshot. -. -.HP -.BR \-\-stripes -.IR Number -.br -Specifies the number of stripes in a striped LV. This is the number of -physical volumes (devices) that a striped LV is spread across. Data that -appears sequential in the LV is spread across multiple devices in units of -the stripe size (see \fB\-\-stripesize\fP). This does not apply to -existing allocated space, only newly allocated space can be striped. -. -.HP -.BR \-I , -.BR \-\-stripesize -.IR StripeSize -.br -Specifies the stripe size in kilobytes for a striped LV. The stripe size -is the number of kilobytes written to each stripe, i.e. to one device, -before writing to the next stripe/device. StripeSize must be a power of 2 -and cannot exceed the VG physical extent (PE) size. -. -.HP -.BR \-\-type -.IR SegmentType -.br -Converts an LV from one segment type to another. -See COMMANDS section for a description of converting between each type. -. -.HP -.BR \-\-thinpool -.IR ThinPoolLogicalVolume { Name | Path } -.br -Specifies the thin pool to use when converting an LV to a thin LV. If -ThinPoolLogicalVolume is not yet a thin pool, the command will attempt to -convert it to a thin pool prior to the thin LV conversion. -Also see -.BR lvmthin (7). -. -.HP -.BR \-\-trackchanges -.br -Can be used with \fB\-\-splitmirrors\fP on a raid1 LV. This causes -changes to the original raid1 LV to be tracked while the split images -remain detached. This allows the read\-only detached image(s) to be -merged efficiently back into the raid1 LV later. Only the regions with -changed data are resynchronized during merge. (This option only applies -to the \fBraid1\fP LV type.) -. -.HP -.BR \-T , -.BR \-\-thin -.br -Alias for -.B \-\-type thin. -See COMMANDS description for -.br -.B lvconvert \-\-type thin. -. -.HP -.BR \-\-uncache -.br -Separates a cache pool from a cache LV, and removes the unused cache pool -LV. Before the separation, the cache is flushed. See similar option -.B \-\-splitcache. -Also see -.BR lvmcache (7). -. -.HP -.BR \-Z , -.BR \-\-zero -.RB { y | n } -.br -For snapshots, this controls zeroing of the first 4KiB of data in the -snapshot. If the LV is read\-only, the snapshot will not be zeroed. - -For thin pools, this controls zeroing of provisioned blocks. -Provisioning of large zeroed chunks negatively impacts performance. -Also see -.BR lvmthin (7). -. - -.SH Examples -. -Convert a linear LV to a two-way mirror LV: -.br -.B lvconvert \-\-type mirror \-\-mirrors 1 vg/lvol1 - -Convert a linear LV to a two-way RAID1 LV: -.br -.B lvconvert \-\-type raid1 \-\-mirrors 1 vg/lvol1 - -Convert a mirror LV to use an in\-memory log: -.br -.B lvconvert \-\-mirrorlog core vg/lvol1 - -Convert a mirror LV to use a disk log: -.br -.B lvconvert \-\-mirrorlog disk vg/lvol1 - -Convert a mirror or raid1 LV to a linear LV: -.br -.B lvconvert --type linear vg/lvol1 - -Convert a mirror LV to a raid1 LV with the same number of images: -.br -.B lvconvert \-\-type raid1 vg/lvol1 - -./" Split and merge a COW snapshot: -./" TODO -Convert a linear LV to a two-way mirror LV, allocating new extents from specific -PV ranges: -.br -.B lvconvert \-\-mirrors 1 vg/lvol1 /dev/sda:0\-15 /dev/sdb:0\-15 - -Convert a mirror LV to a linear LV, freeing physical extents from a specific PV: -.br -.B lvconvert \-\-type linear vg/lvol1 /dev/sda - -Split one image from a mirror or raid1 LV, making it a new LV: -.br -.B lvconvert \-\-splitmirrors 1 \-\-name lv_split vg/lvol1 - -Split one image from a raid1 LV, and track changes made to the raid1 LV -while the split image remains detached: -.br -.B lvconvert \-\-splitmirrors 1 \-\-trackchanges vg/lvol1 - -Merge an image (that was previously created with \-\-splitmirrors and -\-\-trackchanges) back into the original raid1 LV: -.br -.B lvconvert \-\-merge vg/lvol1_rimage_1 -./" FIXME: use merge-mirror - -Replace PV /dev/sdb1 with PV /dev/sdf1 in a raid1/4/5/6/10 LV: -.br -.B lvconvert \-\-replace /dev/sdb1 vg/lvol1 /dev/sdf1 - -Replace 3 PVs /dev/sd[b-d]1 with PVs /dev/sd[f-h]1 in a raid1 LV: -.br -.B lvconvert \-\-replace /dev/sdb1 \-\-replace /dev/sdc1 \-\-replace /dev/sdd1 -.RS -.B vg/lvol1 /dev/sd[fgh]1 -.RE - -Replace the maximum of 2 PVs /dev/sd[bc]1 with PVs /dev/sd[gh]1 in a raid6 LV: -.br -.B lvconvert \-\-replace /dev/sdb1 \-\-replace /dev/sdc1 vg/lvol1 /dev/sd[gh]1 - -Convert an LV into a thin LV in the specified thin pool. The existing LV -is used as an external read\-only origin for the new thin LV. -.br -.B lvconvert \-\-type thin \-\-thinpool vg/tpool1 vg/lvol1 - -Convert an LV into a thin LV in the specified thin pool. The existing LV -is used as an external read\-only origin for the new thin LV, and is -renamed "external": -.br -.B lvconvert \-\-type thin \-\-thinpool vg/tpool1 -.RS -.B \-\-originname external vg/lvol1 -.RE - -Convert an LV to a cache pool LV using another specified LV for cache pool -metadata: -.br -.B lvconvert \-\-type cache-pool \-\-poolmetadata vg/poolmeta1 vg/lvol1 - -Convert an LV to a cache LV using the specified cache pool and chunk size: -.br -.B lvconvert \-\-type cache \-\-cachepool vg/cpool1 \-c 128 vg/lvol1 - -Detach and keep the cache pool from a cache LV: -.br -.B lvconvert \-\-splitcache vg/lvol1 - -Detach and remove the cache pool from a cache LV: -.br -.B lvconvert \-\-uncache vg/lvol1 - -.SH SEE ALSO -.BR lvm (8), -.BR lvm.conf (5), -.BR lvmcache (7), -.BR lvmthin (7), -.BR lvdisplay (8), -.BR lvextend (8), -.BR lvreduce (8), -.BR lvremove (8), -.BR lvrename (8), -.BR lvscan (8), -.BR vgcreate (8), -.BR cache_dump (8), -.BR cache_repair (8), -.BR cache_restore (8), -.BR thin_dump (8), -.BR thin_repair (8), -.BR thin_restore (8) diff --git a/man/lvcreate.8.des b/man/lvcreate.8.des new file mode 100644 index 000000000..e18affeac --- /dev/null +++ b/man/lvcreate.8.des @@ -0,0 +1,28 @@ +lvcreate creates a new LV in a VG. For standard LVs, this requires +allocating logical extents from the VG's free physical extents. If there +is not enough free space, then the VG can be extended (see +\fBvgextend\fP(8)) with other PVs, or existing LVs can be reduced or +removed (see \fBlvremove\fP, \fBlvreduce\fP.) + +To control which PVs a new LV will use, specify one or more PVs as +position args at the end of the command line. lvcreate will allocate +physical extents only from the specified PVs. + +lvcreate can also create snapshots of existing LVs, e.g. for backup +purposes. The data in a new snapshot LV represents the content of the +original LV from the time the snapshot was created. + +RAID LVs can be created by specifying an LV type when creating the LV (see +\fBlvmraid\fP(7)). Different RAID levels require different numbers of +unique PVs be available in the VG for allocation. + +Thin pools (for thin provisioning) and cache pools (for caching) are +represented by special LVs with types thin-pool and cache-pool (see +\fBlvmthin\fP(7) and \fBlvmcache\fP(7)). The pool LVs are not usable as +standard block devices, but the LV names act references to the pools. + +Thin LVs are thinly provisioned from a thin pool, and are created with a +virtual size rather than a physical size. A cache LV is the combination of +a standard LV with a cache pool, used to cache active portions of the LV +to improve performance. + diff --git a/man/lvcreate.8.end b/man/lvcreate.8.end new file mode 100644 index 000000000..74ae599cb --- /dev/null +++ b/man/lvcreate.8.end @@ -0,0 +1,98 @@ +.SH EXAMPLES + +Create a striped LV with 3 stripes, a stripe size of 8KiB and a size of 100MiB. +The LV name is chosen by lvcreate. +.br +.B lvcreate \-i 3 \-I 8 \-L 100m vg00 + +Create a raid1 LV with two images, and a useable size of 500 MiB. This +operation requires two devices, one for each mirror image. RAID metadata +(superblock and bitmap) is also included on the two devices. +.br +.B lvcreate \-\-type raid1 \-m1 \-L 500m \-n mylv vg00 + +Create a mirror LV with two images, and a useable size of 500 MiB. +This operation requires three devices: two for mirror images and +one for a disk log. +.br +.B lvcreate \-\-type mirror \-m1 \-L 500m \-n mylv vg00 + +Create a mirror LV with 2 images, and a useable size of 500 MiB. +This operation requires 2 devices because the log is in memory. +.br +.B lvcreate \-\-type mirror \-m1 \-\-mirrorlog core \-L 500m \-n mylv vg00 + +Create a copy\-on\-write snapshot of an LV: +.br +.B lvcreate \-\-snapshot \-\-size 100m \-\-name mysnap vg00/mylv + +Create a copy\-on\-write snapshot with a size sufficient +for overwriting 20% of the size of the original LV. +.br +.B lvcreate \-s \-l 20%ORIGIN \-n mysnap vg00/mylv + +Create a sparse LV with 1TiB of virtual space, and actual space just under +100MiB. +.br +.B lvcreate \-\-snapshot \-\-virtualsize 1t \-\-size 100m \-\-name mylv vg00 + +Create a linear LV with a usable size of 64MiB on specific physical extents. +.br +.B lvcreate \-L 64m \-n mylv vg00 /dev/sda:0\-7 /dev/sdb:0\-7 + +Create a RAID5 LV with a usable size of 5GiB, 3 stripes, a stripe size of +64KiB, using a total of 4 devices (including one for parity). +.br +.B lvcreate \-\-type raid5 \-L 5G \-i 3 \-I 64 \-n mylv vg00 + +Create a RAID5 LV using all of the free space in the VG and spanning all the +PVs in the VG (note that the command will fail if there are more than 8 PVs in +the VG, in which case \fB\-i 7\fP must be used to get to the current maximum of +8 devices including parity for RaidLVs). +.br +.B lvcreate \-\-config allocation/raid_stripe_all_devices=1 +.RS +.B \-\-type raid5 \-l 100%FREE \-n mylv vg00 +.RE + +Create RAID10 LV with a usable size of 5GiB, using 2 stripes, each on +a two-image mirror. (Note that the \fB-i\fP and \fB-m\fP arguments behave +differently: +\fB-i\fP specifies the total number of stripes, +but \fB-m\fP specifies the number of images in addition +to the first image). +.br +.B lvcreate \-\-type raid10 \-L 5G \-i 2 \-m 1 \-n mylv vg00 + +Create a 1TiB thin LV, first creating a new thin pool for it, where +the thin pool has 100MiB of space, uses 2 stripes, has a 64KiB stripe +size, and 256KiB chunk size. +.br +.B lvcreate \-\-type thin \-\-name mylv \-\-thinpool mypool +.RS +.B \-V 1t \-L 100m \-i 2 \-I 64 \-c 256 vg00 +.RE + +Create a thin snapshot of a thin LV (the size option must not be +used, otherwise a copy-on-write snapshot would be created). +.br +.B lvcreate \-\-snapshot \-\-name mysnap vg00/thinvol + +Create a thin snapshot of the read-only inactive LV named "origin" +which becomes an external origin for the thin snapshot LV. +.br +.B lvcreate \-\-snapshot \-\-name mysnap \-\-thinpool mypool vg00/origin + +Create a cache pool from a fast physical device. The cache pool can +then be used to cache an LV. +.br +.B lvcreate \-\-type cache-pool \-L 1G \-n my_cpool vg00 /dev/fast1 + +Create a cache LV, first creating a new origin LV on a slow physical device, +then combining the new origin LV with an existing cache pool. +.br +.B lvcreate \-\-type cache \-\-cachepool my_cpool +.RS +.B \-L 100G \-n mylv vg00 /dev/slow1 +.RE + diff --git a/man/lvcreate.8.in b/man/lvcreate.8.in deleted file mode 100644 index 84afbda3b..000000000 --- a/man/lvcreate.8.in +++ /dev/null @@ -1,914 +0,0 @@ -.TH LVCREATE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -. -.\" Use 1st. parameter with \% to fix 'man2html' rendeing on same line! -.de SIZE_G -. IR \\$1 \c -. RB [ b | B | s | S | k | K | m | M | g | G ] -.. -.de SIZE_E -. IR \\$1 \c -. RB [ b | B | s | S | k | K | m | M | \c -. BR g | G | t | T | p | P | e | E ] -.. -. -.SH NAME -. -lvcreate \- create a logical volume in an existing volume group -. -.SH SYNOPSIS -. -.ad l -.B lvcreate -.RB [ \-a | \-\-activate -.RB [ a ][ e | l | s ]{ y | n }] -.RB [ \-\-addtag -.IR Tag ] -.RB [ \-\-alloc -.IR Allocation\%Policy ] -.RB [ \-A | \-\-autobackup -.RB { y | n }] -.RB [ \-H | \-\-cache ] -.RB [ \-\-cachemode -.RB { passthrough | writeback | writethrough }] -.RB [ \-\-cachepolicy -.IR Policy ] -.RB \%[ \-\-cachepool -.IR CachePoolLogicalVolume ] -.RB [ \-\-cachesettings -.IR Key \fB= Value ] -.RB [ \-c | \-\-chunksize -.IR ChunkSize ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB \%[ \-C | \-\-contiguous -.RB { y | n }] -.RB [ \-d | \-\-debug ] -.RB [ \-\-discards -.RB \%{ ignore | nopassdown | passdown }] -.RB [ \-\-errorwhenfull -.RB { y | n }] -.RB [{ \-l | \-\-extents -.BR \fILogicalExtents\%Number [ % { FREE | PVS | VG }] -.RB | -.BR \-L | \-\-size -.BR \fILogicalVolumeSize } -.RB [ \-i | \-\-stripes -.IR Stripes -.RB [ \-I | \-\-stripesize -.IR StripeSize ]]] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-K | \-\-ignoreactivationskip ] -.RB [ \-\-ignoremonitoring ] -.RB [ \-\-minor -.IR Minor -.RB [ \-j | \-\-major -.IR Major ]] -.RB [ \-\-metadataprofile -.IR Profile\%Name ] -.RB [ \-m | \-\-mirrors -.IR Mirrors -.RB [ \-\-corelog | \-\-mirrorlog -.RB { disk | core | mirrored }] -.RB [ \-\-nosync ] -.RB [ \-R | \-\-regionsize -.BR \fIMirrorLogRegionSize ]] -.RB [ \-\-monitor -.RB { y | n }] -.RB [ \-n | \-\-name -.IR Logical\%Volume ] -.RB [ \-\-noudevsync ] -.RB [ \-p | \-\-permission -.RB { r | rw }] -.RB [ \-M | \-\-persistent -.RB { y | n }] -.\" .RB [ \-\-pooldatasize -.\" .I DataVolumeSize -.RB \%[ \-\-poolmetadatasize -.IR MetadataVolumeSize ] -.RB [ \-\-poolmetadataspare -.RB { y | n }] -.RB [ \-\- [ raid ] maxrecoveryrate -.IR Rate ] -.RB [ \-\- [ raid ] minrecoveryrate -.IR Rate ] -.RB [ \-r | \-\-readahead -.RB { \fIReadAheadSectors | auto | none }] -.RB [ \-\-reportformat -.RB {basic | json}] -.RB \%[ \-k | \-\-setactivationskip -.RB { y | n }] -.RB [ \-s | \-\-snapshot ] -.RB [ \-V | \-\-virtualsize -.IR VirtualSize ] -.RB [ \-t | \-\-test ] -.RB [ \-T | \-\-thin ] -.RB [ \-\-thinpool -.IR ThinPoolLogicalVolume ] -.RB [ \-\-type -.IR SegmentType ] -.RB [ \-v | \-\-verbose ] -.RB [ \-W | \-\-wipesignatures -.RB { y | n }] -.RB [ \-Z | \-\-zero -.RB { y | n }] -.RI [ VolumeGroup -.RI | -.RI \%{ ExternalOrigin | Origin | Pool } LogicalVolume -.RI \%[ PhysicalVolumePath [ \fB: \fIPE \fR[ \fB\- PE ]]...]] -.LP -.B lvcreate -.RB [ \-l | \-\-extents -.BR \fILogicalExtentsNumber [ % { FREE | ORIGIN | PVS | VG }] -| -.BR \-L | \-\-size -.\" | \-\-pooldatasize -.IR LogicalVolumeSize ] -.RB [ \-c | \-\-chunksize -.IR ChunkSize ] -.RB \%[ \-\-commandprofile -.IR Profile\%Name ] -.RB [ \-\-noudevsync ] -.RB [ \-\-ignoremonitoring ] -.RB [ \-\-metadataprofile -.IR Profile\%Name ] -.RB \%[ \-\-monitor -.RB { y | n }] -.RB [ \-n | \-\-name -.IR SnapshotLogicalVolumeName ] -.RB [ \-\-reportformat -.RB {basic | json}] -.BR \-s | \-\-snapshot | \-H | \-\-cache -.RI \%{[ VolumeGroup \fB/\fP] OriginalLogicalVolume -.RB \%[ \-V | \-\-virtualsize -.IR VirtualSize ]} -.ad b -. -.SH DESCRIPTION -. -lvcreate creates a new logical volume in a volume group (see -.BR vgcreate "(8), " vgchange (8)) -by allocating logical extents from the free physical extent pool -of that volume group. If there are not enough free physical extents then -the volume group can be extended (see -.BR vgextend (8)) -with other physical volumes or by reducing existing logical volumes -of this volume group in size (see -.BR lvreduce (8)). -If you specify one or more PhysicalVolumes, allocation of physical -extents will be restricted to these volumes. -.br -.br -The second form supports the creation of snapshot logical volumes which -keep the contents of the original logical volume for backup purposes. -. -.SH OPTIONS -. -See -.BR lvm (8) -for common options. -. -.HP -.BR \-a | \-\-activate -.RB [ a ][ l | e | s ]{ y | n } -.br -Controls the availability of the Logical Volumes for immediate use after -the command finishes running. -By default, new Logical Volumes are activated (\fB\-ay\fP). -If it is possible technically, \fB\-an\fP will leave the new Logical -Volume inactive. But for example, snapshots of active origin can only be -created in the active state so \fB\-an\fP cannot be used with -\fB-\-type snapshot\fP. This does not apply to thin volume snapshots, -which are by default created with flag to skip their activation -(\fB-ky\fP). -Normally the \fB\-\-zero n\fP argument has to be supplied too because -zeroing (the default behaviour) also requires activation. -If autoactivation option is used (\fB\-aay\fP), the logical volume is -activated only if it matches an item in the -\fBactivation/auto_activation_volume_list\fP -set in \fBlvm.conf\fP(5). -For autoactivated logical volumes, \fB\-\-zero n\fP and -\fB\-\-wipesignatures n\fP is always assumed and it can't -be overridden. If the clustered locking is enabled, -\fB\-aey\fP will activate exclusively on one node and -.BR \-a { a | l } y -will activate only on the local node. -. -.HP -.BR \-H | \-\-cache -.br -Creates cache or cache pool logical volume. -.\" or both. -Specifying the optional argument \fB\-\-extents\fP or \fB\-\-size\fP -will cause the creation of the cache logical volume. -.\" Specifying the optional argument \fB\-\-pooldatasize\fP will cause -.\" the creation of the cache pool logical volume. -.\" Specifying both arguments will cause the creation of cache with its -.\" cache pool volume. -When the Volume group name is specified together with existing logical volume -name which is NOT a cache pool name, such volume is treated -as cache origin volume and cache pool is created. In this case the -\fB\-\-extents\fP or \fB\-\-size\fP is used to specify size of cache pool volume. -See \fBlvmcache\fP(7) for more info about caching support. -Note that the cache segment type requires a dm-cache kernel module version -1.3.0 or greater. -. -.HP -.BR \-\-cachemode -.RB { passthrough | writeback | writethrough } -.br -Specifying a cache mode determines when the writes to a cache LV -are considered complete. When \fBwriteback\fP is specified, a write is -considered complete as soon as it is stored in the cache pool LV. -If \fBwritethough\fP is specified, a write is considered complete only -when it has been stored in the cache pool LV and on the origin LV. -While \fBwritethrough\fP may be slower for writes, it is more -resilient if something should happen to a device associated with the -cache pool LV. With \fBpassthrough\fP mode, all reads are served -from origin LV (all reads miss the cache) and all writes are -forwarded to the origin LV; additionally, write hits cause cache -block invalidates. See \fBlvmcache(7)\fP for more details. -. -.HP -.BR \-\-cachepolicy -.IR Policy -.br -Only applicable to cached LVs; see also \fBlvmcache(7)\fP. Sets -the cache policy. \fBmq\fP is the basic policy name. \fBsmq\fP is more advanced -version available in newer kernels. -. -.HP -.BR \-\-cachepool -.IR CachePoolLogicalVolume { Name | Path } -.br -Specifies the name of cache pool volume name. The other way to specify pool name -is to append name to Volume group name argument. -. -.HP -.BR \-\-cachesettings -.IB Key = Value -.br -Only applicable to cached LVs; see also \fBlvmcache(7)\fP. Sets -the cache tunable settings. In most use-cases, default values should be adequate. -Special string value \fBdefault\fP switches setting back to its default kernel value -and removes it from the list of settings stored in lvm2 metadata. -. -.HP -.BR \-c | \-\-chunksize -.SIZE_G \%ChunkSize -.br -Gives the size of chunk for snapshot, cache pool and thin pool logical volumes. -Default unit is in kilobytes. -.br -For snapshots the value must be power of 2 between 4KiB and 512KiB -and the default value is 4KiB. -.br -For cache pools the value must a multiple of 32KiB -between 32KiB and 1GiB. The default is 64KiB. -When the size is specified with volume caching, it may not be smaller -than cache pool creation chunk size was. -.br -For thin pools the value must be a multiple of 64KiB -between 64KiB and 1GiB. -Default value starts with 64KiB and grows up to -fit the pool metadata size within 128MiB, -if the pool metadata size is not specified. -See -.BR lvm.conf (5) -setting \fBallocation/thin_pool_chunk_size_policy\fP -to select different calculation policy. -Thin pool target version <1.4 requires this value to be a power of 2. -For target version <1.5 discard is not supported for non power of 2 values. -. -.HP -.BR \-C | \-\-contiguous -.RB { y | n } -.br -Sets or resets the contiguous allocation policy for -logical volumes. Default is no contiguous allocation based -on a next free principle. -. -.HP -.BR \-\-corelog -.br -This is shortcut for option \fB\-\-mirrorlog core\fP. -. -.HP -.BR \-\-discards -.RB { ignore | nopassdown | passdown } -.br -Sets discards behavior for thin pool. -Default is \fBpassdown\fP. -. -.HP -.BR \-\-errorwhenfull -.RB { y | n } -.br -Configures thin pool behaviour when data space is exhausted. -Default is \fBn\fPo. -Device will queue I/O operations until target timeout -(see dm-thin-pool kernel module option \fPno_space_timeout\fP) -expires. Thus configured system has a time to i.e. extend -the size of thin pool data device. -When set to \fBy\fPes, the I/O operation is immeditelly errored. -. -.HP -.BR \-K | \-\-ignoreactivationskip -.br -Ignore the flag to skip Logical Volumes during activation. -Use \fB\-\-setactivationskip\fP option to set or reset -activation skipping flag persistently for logical volume. -. -.HP -.BR \-\-ignoremonitoring -.br -Make no attempt to interact with dmeventd unless \fB\-\-monitor\fP -is specified. -. -.HP -.BR -l | \-\-extents -.IR LogicalExtentsNumber \c -.RB [ % { VG | PVS | FREE | ORIGIN }] -.br -Specifies the size of the new LV in logical extents. The number of -physical extents allocated may be different, and depends on the LV type. -Certain LV types require more physical extents for data redundancy or -metadata. An alternate syntax allows the size to be determined indirectly -as a percentage of the size of a related VG, LV, or set of PVs. The -suffix \fB%VG\fP denotes the total size of the VG, the suffix \fB%FREE\fP -the remaining free space in the VG, and the suffix \fB%PVS\fP the free -space in the specified Physical Volumes. For a snapshot, the size -can be expressed as a percentage of the total size of the Origin Logical -Volume with the suffix \fB%ORIGIN\fP (\fB100%ORIGIN\fP provides space for -the whole origin). -When expressed as a percentage, the size defines an upper limit for the -number of logical extents in the new LV. The precise number of logical -extents in the new LV is not determined until the command has completed. -. -.HP -.BR \-j | \-\-major -.IR Major -.br -Sets the major number. -Major numbers are not supported with pool volumes. -This option is supported only on older systems -(kernel version 2.4) and is ignored on modern Linux systems where major -numbers are dynamically assigned. -. -.HP -.BR \-\-metadataprofile -.IR ProfileName -.br -Uses and attaches the \fIProfileName\fP configuration profile to the logical -volume metadata. Whenever the logical volume is processed next time, -the profile is automatically applied. If the volume group has another -profile attached, the logical volume profile is preferred. -See \fBlvm.conf\fP(5) for more information about \fBmetadata profiles\fP. -. -.HP -.BR \-\-minor -.IR Minor -.br -Sets the minor number. -Minor numbers are not supported with pool volumes. -. -.HP -.BR \-m | \-\-mirrors -.IR mirrors -.br -Creates a mirrored logical volume with \fImirrors\fP copies. -For example, specifying \fB\-m 1\fP -would result in a mirror with two-sides; that is, -a linear volume plus one copy. - -Specifying the optional argument \fB\-\-nosync\fP will cause the creation -of the mirror LV to skip the initial resynchronization. Any data written -afterwards will be mirrored, but the original contents will not be copied. - -This is useful for skipping a potentially long and resource intensive initial -sync of an empty mirrored RaidLV. - -There are two implementations of mirroring which can be used and correspond -to the "\fIraid1\fP" and "\fImirror\fP" segment types. -The default is "\fIraid1\fP". See the -\fB\-\-type\fP option for more information if you would like to use the -legacy "\fImirror\fP" segment type. See -.BR lvm.conf (5) -settings \fB global/mirror_segtype_default\fP -and \fBglobal/raid10_segtype_default\fP -to configure default mirror segment type. -The options -\fB\-\-mirrorlog\fP and \fB\-\-corelog\fP apply -to the legacy "\fImirror\fP" segment type only. - -Note the current maxima for mirrors are 7 for "mirror" providing -8 mirror legs and 9 for "raid1" providing 10 legs. -. -.HP -.BR \-\-mirrorlog -.RB { disk | core | mirrored } -.br -Specifies the type of log to be used for logical volumes utilizing -the legacy "\fImirror\fP" segment type. -.br -The default is \fBdisk\fP, which is persistent and requires -a small amount of storage space, usually on a separate device from the -data being mirrored. -.br -Using \fBcore\fP means the mirror is regenerated by copying the data -from the first device each time the logical volume is activated, -like after every reboot. -.br -Using \fBmirrored\fP will create a persistent log that is itself mirrored. -. -.HP -.BR \-\-monitor -.RB { y | n } -.br -Starts or avoids monitoring a mirrored, snapshot or thin pool logical volume with -dmeventd, if it is installed. -If a device used by a monitored mirror reports an I/O error, -the failure is handled according to -\fBactivation/mirror_image_fault_policy\fP -and \fBactivation/mirror_log_fault_policy\fP -set in \fBlvm.conf\fP(5). -. -.HP -.BR \-n | \-\-name -.IR LogicalVolume { Name | Path } -.br -Sets the name for the new logical volume. -.br -Without this option a default name of "lvol#" will be generated where -# is the LVM internal number of the logical volume. -. -.HP -.BR \-\-nosync -.br -Causes the creation of mirror, raid1, raid4, raid5 and raid10 to skip the -initial resynchronization. In case of mirror, raid1 and raid10, any data -written afterwards will be mirrored, but the original contents will not be -copied. In case of raid4 and raid5, no parity blocks will be written, -though any data written afterwards will cause parity blocks to be stored. -.br -This is useful for skipping a potentially long and resource intensive initial -sync of an empty mirror/raid1/raid4/raid5 and raid10 LV. -.br -This option is not valid for raid6, because raid6 relies on proper parity -(P and Q Syndromes) being created during initial synchronization in order -to reconstruct proper user date in case of device failures. - -raid0 and raid0_meta don't provide any data copies or parity support -and thus don't support initial resynchronization. -. -.HP -.BR \-\-noudevsync -.br -Disables udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -. -.HP -.BR \-p | \-\-permission -.RB { r | rw } -.br -Sets access permissions to read only (\fBr\fP) or read and write (\fBrw\fP). -.br -Default is read and write. -. -.HP -.BR \-M | \-\-persistent -.RB { y | n } -.br -Set to \fBy\fP to make the minor number specified persistent. -Pool volumes cannot have persistent major and minor numbers. -Defaults to \fBy\fPes only when major or minor number is specified. -Otherwise it is \fBn\fPo. -.\" .HP -.\" .IR \fB\-\-pooldatasize " " PoolDataVolumeSize [ bBsSkKmMgGtTpPeE ] -.\" Sets the size of pool's data logical volume. -.\" For thin pools you may also specify the size -.\" with the option \fB\-\-size\fP. -.\" -. -.HP -.BR \-\-poolmetadatasize -.SIZE_G \%MetadataVolumeSize -.br -Sets the size of pool's metadata logical volume. -Supported values are in range between 2MiB and 16GiB for thin pool, -and upto 16GiB for cache pool. The minimum value is computed from pool's -data size. -Default value for thin pool is (Pool_LV_size / Pool_LV_chunk_size * 64b). -To work with a thin pool, there should be at least 25% of free space -when the size of metadata is smaller then 16MiB, -or at least 4MiB of free space otherwise. -Default unit is megabytes. -. -.HP -.BR \-\-poolmetadataspare -.RB { y | n } -.br -Controls creation and maintanence of pool metadata spare logical volume -that will be used for automated pool recovery. -Only one such volume is maintained within a volume group -with the size of the biggest pool metadata volume. -Default is \fBy\fPes. -. -.HP -.BR \-\- [ raid ] maxrecoveryrate -.SIZE_G \%Rate -.br -Sets the maximum recovery rate for a RAID logical volume. \fIRate\fP -is specified as an amount per second for each device in the array. -If no suffix is given, then KiB/sec/device is assumed. Setting the -recovery rate to 0 means it will be unbounded. -. -.HP -.BR \-\- [ raid ] minrecoveryrate -.SIZE_G \%Rate -.br -Sets the minimum recovery rate for a RAID logical volume. \fIRate\fP -is specified as an amount per second for each device in the array. -If no suffix is given, then KiB/sec/device is assumed. Setting the -recovery rate to 0 means it will be unbounded. -. -.HP -.BR \-r | \-\-readahead -.RB { \fIReadAheadSectors | auto | none } -.br -Sets read ahead sector count of this logical volume. -For volume groups with metadata in lvm1 format, this must -be a value between 2 and 120. -The default value is \fBauto\fP which allows the kernel to choose -a suitable value automatically. -\fBnone\fP is equivalent to specifying zero. -. -.HP -.BR \-R | \-\-regionsize -.SIZE_G \%MirrorLogRegionSize -.br -A mirror is divided into regions of this size (in MiB), and the mirror log -uses this granularity to track which regions are in sync. -. -.HP -.BR \-k | \-\-setactivationskip -.RB { y | n } -.br -Controls whether Logical Volumes are persistently flagged to be skipped during -activation. By default, thin snapshot volumes are flagged for activation skip. -See -.BR lvm.conf (5) -\fBactivation/auto_set_activation_skip\fP -how to change its default behaviour. -To activate such volumes, an extra \fB\-\-ignoreactivationskip\fP -option must be used. The flag is not applied during deactivation. Use -\fBlvchange \-\-setactivationskip\fP -command to change the skip flag for existing volumes. -To see whether the flag is attached, use \fBlvs\fP command -where the state of the flag is reported within \fBlv_attr\fP bits. -. -.HP -.BR \-L | \-\-size -.SIZE_E \%LogicalVolumeSize -.br -Gives the size to allocate for the new logical volume. -A size suffix of \fBB\fP for bytes, \fBS\fP for sectors as 512 bytes, -\fBK\fP for kilobytes, \fBM\fP for megabytes, -\fBG\fP for gigabytes, \fBT\fP for terabytes, \fBP\fP for petabytes -or \fBE\fP for exabytes is optional. -.br -Default unit is megabytes. -. -.HP -.BR \-s | \fB\-\-snapshot -.IR OriginalLogicalVolume { Name | Path } -.br -Creates a snapshot logical volume (or snapshot) for an existing, so called -original logical volume (or origin). -Snapshots provide a 'frozen image' of the contents of the origin -while the origin can still be updated. They enable consistent -backups and online recovery of removed/overwritten data/files. -.br -Thin snapshot is created when the origin is a thin volume and -the size IS NOT specified. Thin snapshot shares same blocks within -the thin pool volume. -The non thin volume snapshot with the specified size does not need -the same amount of storage the origin has. In a typical scenario, -15-20% might be enough. In case the snapshot runs out of storage, use -.BR lvextend (8) -to grow it. Shrinking a snapshot is supported by -.BR lvreduce (8) -as well. Run -.BR lvs (8) -on the snapshot in order to check how much data is allocated to it. -Note: a small amount of the space you allocate to the snapshot is -used to track the locations of the chunks of data, so you should -allocate slightly more space than you actually need and monitor -(\fB\-\-monitor\fP) the rate at which the snapshot data is growing -so you can \fBavoid\fP running out of space. -If \fB\-\-thinpool\fP is specified, thin volume is created that will -use given original logical volume as an external origin that -serves unprovisioned blocks. -Only read-only volumes can be used as external origins. -To make the volume external origin, lvm expects the volume to be inactive. -External origin volume can be used/shared for many thin volumes -even from different thin pools. See -.BR lvconvert (8) -for online conversion to thin volumes with external origin. -. -.HP -.BR \-i | \-\-stripes -.IR Stripes -.br -Gives the number of stripes. -This is equal to the number of physical volumes to scatter -the logical volume data. When creating a RAID 4/5/6 logical volume, -the extra devices which are necessary for parity are -internally accounted for. Specifying \fB\-i 3\fP -would cause 3 devices for striped and RAID 0 logical volumes, -4 devices for RAID 4/5, 5 devices for RAID 6 and 6 devices for RAID 10. -Alternatively, RAID 0 will stripe across 2 devices, -RAID 4/5 across 3 PVs, RAID 6 across 5 PVs and RAID 10 across -4 PVs in the volume group if the \fB\-i\fP argument is omitted. -In order to stripe across all PVs of the VG if the \fB\-i\fP argument is -omitted, set raid_stripe_all_devices=1 in the allocation -section of \fBlvm.conf (5)\fP or add -.br -\fB\-\-config allocation/raid_stripe_all_devices=1\fP -.br -to the command. - -Note the current maxima for stripes depend on the created RAID type. -For raid10, the maximum of stripes is 32, -for raid0, it is 64, -for raid4/5, it is 63 -and for raid6 it is 62. - -See the \fB\-\-nosync\fP option to optionally avoid initial syncrhonization of RaidLVs. - -Two implementations of basic striping are available in the kernel. -The original device-mapper implementation is the default and should -normally be used. The alternative implementation using MD, available -since version 1.7 of the RAID device-mapper kernel target (kernel -version 4.2) is provided to facilitate the development of new RAID -features. It may be accessed with \fB--type raid0[_meta]\fP, but is best -avoided at present because of assorted restrictions on resizing and converting -such devices. -.HP -.BR \-I | \-\-stripesize -.IR StripeSize -.br -Gives the number of kilobytes for the granularity of the stripes. -.br -StripeSize must be 2^n (n = 2 to 9) for metadata in LVM1 format. -For metadata in LVM2 format, the stripe size may be a larger -power of 2 but must not exceed the physical extent size. -. -.HP -.BR \-T | \-\-thin -.br -Creates thin pool or thin logical volume or both. -Specifying the optional argument \fB\-\-size\fP or \fB\-\-extents\fP -will cause the creation of the thin pool logical volume. -Specifying the optional argument \fB\-\-virtualsize\fP will cause -the creation of the thin logical volume from given thin pool volume. -Specifying both arguments will cause the creation of both -thin pool and thin volume using this pool. -See \fBlvmthin\fP(7) for more info about thin provisioning support. -Thin provisioning requires device mapper kernel driver -from kernel 3.2 or greater. -. -.HP -.BR \-\-thinpool -.IR ThinPoolLogicalVolume { Name | Path } -.br -Specifies the name of thin pool volume name. The other way to specify pool name -is to append name to Volume group name argument. -. -.HP -.BR \-\-type -.IR SegmentType -.br -Creates a logical volume with the specified segment type. -Supported types are: -.BR cache , -.BR cache-pool , -.BR error , -.BR linear , -.BR mirror, -.BR raid0 , -.BR raid1 , -.BR raid4 , -.BR raid5_la , -.BR raid5_ls -.RB (= -.BR raid5 ), -.BR raid5_ra , -.BR raid5_rs , -.BR raid6_nc , -.BR raid6_nr , -.BR raid6_zr -.RB (= -.BR raid6 ), -.BR raid10 , -.BR snapshot , -.BR striped, -.BR thin , -.BR thin-pool -or -.BR zero . -Segment type may have a commandline switch alias that will -enable its use. -When the type is not explicitly specified an implicit type -is selected from combination of options: -.BR \-H | \-\-cache | \-\-cachepool -(cache or cachepool), -.BR \-T | \-\-thin | \-\-thinpool -(thin or thinpool), -.BR \-m | \-\-mirrors -(raid1 or mirror), -.BR \-s | \-\-snapshot | \-V | \-\-virtualsize -(snapshot or thin), -.BR \-i | \-\-stripes -(striped). -The default segment type is \fBlinear\fP. -. -.HP -.BR \-V | \-\-virtualsize -.SIZE_E \%VirtualSize -.br -Creates a thinly provisioned device or a sparse device of the given size (in MiB by default). -See -.BR lvm.conf (5) -settings \fBglobal/sparse_segtype_default\fP -to configure default sparse segment type. -See \fBlvmthin\fP(7) for more info about thin provisioning support. -Anything written to a sparse snapshot will be returned when reading from it. -Reading from other areas of the device will return blocks of zeros. -Virtual snapshot (sparse snapshot) is implemented by creating -a hidden virtual device of the requested size using the zero target. -A suffix of _vorigin is used for this device. -Note: using sparse snapshots is not efficient for larger -device sizes (GiB), thin provisioning should be used for this case. -. -.HP -.BR \-W | \-\-wipesignatures -.RB { y | n } -.br -Controls detection and subsequent wiping of signatures on newly created -Logical Volume. There's a prompt for each signature detected to confirm -its wiping (unless \fB--yes\fP is used where LVM assumes 'yes' answer -for each prompt automatically). If this option is not specified, then by -default \fB-W\fP | \fB--wipesignatures y\fP is assumed each time the -zeroing is done (\fB\-Z\fP | \fB\-\-zero y\fP). This default behaviour -can be controlled by \fB\%allocation/wipe_signatures_when_zeroing_new_lvs\fP -setting found in -.BR lvm.conf (5). -.br -If blkid wiping is used (\fBallocation/use_blkid_wiping\fP setting in -.BR lvm.conf (5)) -and LVM2 is compiled with blkid wiping support, then \fBblkid\fP(8) library is used -to detect the signatures (use \fBblkid \-k\fP command to list the signatures that are recognized). -Otherwise, native LVM2 code is used to detect signatures (MD RAID, swap and LUKS -signatures are detected only in this case). -.br -Logical volume is not wiped if the read only flag is set. -. -.HP -.BR \-Z | \-\-zero -.RB { y | n } -.br -Controls zeroing of the first 4KiB of data in the new logical volume. -Default is \fBy\fPes. -Snapshot COW volumes are always zeroed. -Logical volume is not zeroed if the read only flag is set. -.br -Warning: trying to mount an unzeroed logical volume can cause the system to -hang. -. -.SH Examples -. -Creates a striped logical volume with 3 stripes, a stripe size of 8KiB -and a size of 100MiB in the volume group named vg00. -The logical volume name will be chosen by lvcreate: -.sp -.B lvcreate \-i 3 \-I 8 \-L 100M vg00 - -Creates a mirror logical volume with 2 sides with a useable size of 500 MiB. -This operation would require 3 devices (or option -\fB\-\-alloc \%anywhere\fP) - two for the mirror -devices and one for the disk log: -.sp -.B lvcreate \-m1 \-L 500M vg00 - -Creates a mirror logical volume with 2 sides with a useable size of 500 MiB. -This operation would require 2 devices - the log is "in-memory": -.sp -.B lvcreate \-m1 \-\-mirrorlog core \-L 500M vg00 - -Creates a snapshot logical volume named "vg00/snap" which has access to the -contents of the original logical volume named "vg00/lvol1" -at snapshot logical volume creation time. If the original logical volume -contains a file system, you can mount the snapshot logical volume on an -arbitrary directory in order to access the contents of the filesystem to run -a backup while the original filesystem continues to get updated: -.sp -.B lvcreate \-\-size 100m \-\-snapshot \-\-name snap /dev/vg00/lvol1 - -Creates a snapshot logical volume named "vg00/snap" with size -for overwriting 20% of the original logical volume named "vg00/lvol1".: -.sp -.B lvcreate \-s \-l 20%ORIGIN \-\-name snap vg00/lvol1 - -Creates a sparse device named /dev/vg1/sparse of size 1TiB with space for just -under 100MiB of actual data on it: -.sp -.B lvcreate \-\-virtualsize 1T \-\-size 100M \-\-snapshot \-\-name sparse vg1 - -Creates a linear logical volume "vg00/lvol1" using physical extents -/dev/sda:0\-7 and /dev/sdb:0\-7 for allocation of extents: -.sp -.B lvcreate \-L 64M \-n lvol1 vg00 /dev/sda:0\-7 /dev/sdb:0\-7 - -Creates a 5GiB RAID5 logical volume "vg00/my_lv", with 3 stripes (plus -a parity drive for a total of 4 devices) and a stripesize of 64KiB: -.sp -.B lvcreate \-\-type raid5 \-L 5G \-i 3 \-I 64 \-n my_lv vg00 - -Creates a RAID5 logical volume "vg00/my_lv", using all of the free -space in the VG and spanning all the PVs in the VG (note that the command -will fail if there's more than 8 PVs in the VG in which case \fB\-i 7\fP -has to be used to get to the currently possible maximum of -8 devices including parity for RaidLVs): -.sp -.B lvcreate \-\-config allocation/raid_stripe_all_devices=1 \-\-type raid5 \-l 100%FREE \-n my_lv vg00 - -Creates a 5GiB RAID10 logical volume "vg00/my_lv", with 2 stripes on -2 2-way mirrors. Note that the \fB-i\fP and \fB-m\fP arguments behave -differently. -The \fB-i\fP specifies the number of stripes. -The \fB-m\fP specifies the number of -.B additional -copies: -.sp -.B lvcreate \-\-type raid10 \-L 5G \-i 2 \-m 1 \-n my_lv vg00 - -Creates 100MiB pool logical volume for thin provisioning -build with 2 stripes 64KiB and chunk size 256KiB together with -1TiB thin provisioned logical volume "vg00/thin_lv": -.sp -.B lvcreate \-i 2 \-I 64 \-c 256 \-L100M \-T vg00/pool \-V 1T \-\-name thin_lv - -Creates a thin snapshot volume "thinsnap" of thin volume "thinvol" that -will share the same blocks within the thin pool. -Note: the size MUST NOT be specified, otherwise the non-thin snapshot -is created instead: -.sp -.B lvcreate \-s vg00/thinvol \-\-name thinsnap - -Creates a thin snapshot volume of read-only inactive volume "origin" -which then becomes the thin external origin for the thin snapshot volume -in vg00 that will use an existing thin pool "vg00/pool": -.sp -.B lvcreate \-s \-\-thinpool vg00/pool origin - -Create a cache pool LV that can later be used to cache one -logical volume. -.sp -.B lvcreate \-\-type cache-pool \-L 1G \-n my_lv_cachepool vg /dev/fast1 - -If there is an existing cache pool LV, create the large slow -device (i.e. the origin LV) and link it to the supplied cache pool LV, -creating a cache LV. -.sp -.B lvcreate \-\-cache \-L 100G \-n my_lv vg/my_lv_cachepool /dev/slow1 - -If there is an existing logical volume, create the small and fast -cache pool LV and link it to the supplied existing logical -volume (i.e. the origin LV), creating a cache LV. -.sp -.B lvcreate \-\-type cache \-L 1G \-n my_lv_cachepool vg/my_lv /dev/fast1 - -.\" Create a 1G cached LV "lvol1" with 10M cache pool "vg00/pool". -.\" .sp -.\" .B lvcreate \-\-cache \-L 1G \-n lv \-\-pooldatasize 10M vg00/pool -. -.SH SEE ALSO -. -.nh -.BR lvm (8), -.BR lvm.conf (5), -.BR lvmcache (7), -.BR lvmthin (7), -.BR lvconvert (8), -.BR lvchange (8), -.BR lvextend (8), -.BR lvreduce (8), -.BR lvremove (8), -.BR lvrename (8) -.BR lvs (8), -.BR lvscan (8), -.BR vgcreate (8), -.BR blkid (8) diff --git a/man/lvdisplay.8.des b/man/lvdisplay.8.des new file mode 100644 index 000000000..48552cc95 --- /dev/null +++ b/man/lvdisplay.8.des @@ -0,0 +1,5 @@ +lvdisplay shows the attributes of LVs, like size, read/write status, +snapshot information, etc. + +\fBlvs\fP(8) is a preferred alternative that shows the same information +and more, using a more compact and configurable output format. diff --git a/man/lvdisplay.8.in b/man/lvdisplay.8.in deleted file mode 100644 index e8e780966..000000000 --- a/man/lvdisplay.8.in +++ /dev/null @@ -1,134 +0,0 @@ -.TH LVDISPLAY 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvdisplay \(em display attributes of a logical volume -.SH SYNOPSIS -.B lvdisplay -.RB [ \-a | \-\-all ] -.RB [ \-c | \-\-colon ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-maps ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RI [ VolumeGroupName | LogicalVolume { Name | Path }\ ...] -.br - -.B lvdisplay -.BR \-C | \-\-columns -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-a | \-\-all ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-logonly ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-segments ] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RI [ VolumeGroupName | LogicalVolume { Name | Path }\ ...] -.SH DESCRIPTION -lvdisplay allows you to see the attributes of a logical volume -like size, read/write status, snapshot information etc. -.P -\fBlvs\fP(8) is an alternative that provides the same information -in the style of \fBps\fP(1). -\fBlvs\fP(8) is recommended over \fBlvdisplay\fP. - -.SH OPTIONS -See \fBlvm\fP(8) for common options and \fBlvs\fP for options given with -\fB\-\-columns\fP. -.TP -.B \-\-all -Include information in the output about internal Logical Volumes that -are components of normally-accessible Logical Volumes, such as mirrors, -but which are not independently accessible (e.g. not mountable). -For example, after creating a mirror using -\fBlvcreate \-m1 \-\-mirrorlog disk\fP, -this option will reveal three internal Logical Volumes, with suffixes -mimage_0, mimage_1, and mlog. -.TP -.BR \-C ", " \-\-columns -Display output in columns, the equivalent of \fBlvs\fP(8). -Options listed are the same as options given in \fBlvs\fP(8). -.TP -.BR \-c ", " \-\-colon -Generate colon separated output for easier parsing in scripts or programs. -N.B. \fBlvs\fP(8) provides considerably more control over the output. -.nf - -The values are: - -\(bu logical volume name -\(bu volume group name -\(bu logical volume access -\(bu logical volume status -\(bu internal logical volume number -\(bu open count of logical volume -\(bu logical volume size in sectors -\(bu current logical extents associated to logical volume -\(bu allocated logical extents of logical volume -\(bu allocation policy of logical volume -\(bu read ahead sectors of logical volume -\(bu major device number of logical volume -\(bu minor device number of logical volume - -.fi -.TP -.BR \-m ", " \-\-maps -Display the mapping of logical extents to physical volumes and -physical extents. To map physical extents -to logical extents use: -.B pvs \-\-segments \-o+lv_name,seg_start_pe,segtype -.SH Examples -Shows attributes of that logical volume. If snapshot -logical volumes have been created for this original logical volume, -this command shows a list of all snapshot logical volumes and their -status (active or inactive) as well: -.sp -.B lvdisplay \-v vg00/lvol2 - -Shows the attributes of this snapshot logical volume and also which -original logical volume it is associated with: -.sp -.B lvdisplay vg00/snapshot - -.SH SEE ALSO -.BR lvm (8), -.BR lvcreate (8), -.BR lvs (8), -.BR lvscan (8), -.BR pvs (8) diff --git a/man/lvextend.8.des b/man/lvextend.8.des new file mode 100644 index 000000000..2a3781d1d --- /dev/null +++ b/man/lvextend.8.des @@ -0,0 +1,5 @@ +lvextend extends the size of an LV. This requires allocating logical +extents from the VG's free physical extents. A copy\-on\-write snapshot LV +can also be extended to provide more space to hold COW blocks. Use +\fBlvconvert\fP(8) to change the number of data images in a RAID or +mirrored LV. diff --git a/man/lvextend.8.end b/man/lvextend.8.end new file mode 100644 index 000000000..6d197de81 --- /dev/null +++ b/man/lvextend.8.end @@ -0,0 +1,16 @@ +.SH EXAMPLES + +Extend the size of an LV by 54MiB, using a specific PV. +.br +.B lvextend \-L +54 vg01/lvol10 /dev/sdk3 + +Extend the size of an LV by the amount of free +space on PV /dev/sdk3. This is equivalent to specifying +"\-l +100%PVS" on the command line. +.br +.B lvextend vg01/lvol01 /dev/sdk3 + +Extend an LV by 16MiB using specific physical extents. +.br +.B lvextend \-L+16m vg01/lvol01 /dev/sda:8\-9 /dev/sdb:8\-9 + diff --git a/man/lvextend.8.in b/man/lvextend.8.in deleted file mode 100644 index eefbf794d..000000000 --- a/man/lvextend.8.in +++ /dev/null @@ -1,134 +0,0 @@ -.TH LVEXTEND 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvextend \(em extend the size of a logical volume -.SH SYNOPSIS -.B lvextend -.RB [ \-\-alloc -.IR AllocationPolicy ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-f | \-\-force ] -.RB [ \-i | \-\-stripes -.I Stripes -.RB [ \-I | \-\-stripesize -.IR StripeSize ]] -.RB { \-l | \-\-extents -.RI [ + ] LogicalExtentsNumber [ % { VG | LV | PVS | FREE | ORIGIN }] -| -.BR \-L | \-\-size -.RI [ + ] LogicalVolumeSize [ bBsSkKmMgGtTpPeE ]} -.RB [ \-n | \-\-nofsck ] -.RB [ \-\-noudevsync] -.RB [ \-r | \-\-resizefs ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-use\-policies ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.I LogicalVolumePath -.RI [ PhysicalVolumePath [ :PE [ \-PE ]]...] -.SH DESCRIPTION -lvextend allows you to extend the size of a logical volume. -Extension of snapshot logical volumes (see -.BR lvcreate (8) -for information to create snapshots) is supported as well. -But to change the number of copies in a mirrored logical -volume use -.BR lvconvert (8). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-f ", " \-\-force -Proceed with size extension without prompting. -.TP -.IR \fB\-l ", " \fB\-\-extents " [" + ] LogicalExtentsNumber [ % { VG | LV | PVS | FREE | ORIGIN }] -Extend or set the logical volume size in units of logical extents. -With the '\fI+\fP' sign the value is added to the actual size -of the logical volume and without it, the value is taken as an absolute one. -The total number of physical extents allocated will be -greater than this, for example, if the volume is mirrored. -The number can also be expressed as a percentage of the total space -in the Volume Group with the suffix \fI%VG\fP, relative to the existing -size of the Logical Volume with the suffix \fI%LV\fP, of the remaining -free space for the specified PhysicalVolume(s) with the suffix \fI%PVS\fP, -as a percentage of the remaining free space in the Volume Group -with the suffix \fI%FREE\fP, or (for a snapshot) as a percentage of the total -space in the Origin Logical Volume with the suffix \fI%ORIGIN\fP. -The resulting value is rounded upward. -N.B. In a future release, when expressed as a percentage with PVS, VG or FREE, -the number will be treated as an approximate upper limit for the total number -of physical extents to be allocated (including extents used by any mirrors, for -example). The code may currently allocate more space than you might otherwise -expect. -.TP -.IR \fB\-L ", " \fB\-\-size " [" + ] LogicalVolumeSize [ bBsSkKmMgGtTpPeE ] -Extend or set the logical volume size in units of megabytes. -A size suffix of M for megabytes, -G for gigabytes, T for terabytes, P for petabytes -or E for exabytes is optional. -With the + sign the value is added to the actual size -of the logical volume and without it, the value is taken as an absolute one. -.TP -.BR \-i ", " \-\-stripes " " \fIStripes -Gives the number of stripes for the extension. -Not applicable to LVs using the original metadata LVM format, which must -use a single value throughout. -.TP -.BR \-I ", " \-\-stripesize " " \fIStripeSize -Gives the number of kilobytes for the granularity of the stripes. -Not applicable to LVs using the original metadata LVM format, which must -use a single value throughout. -.br -StripeSize must be 2^n (n = 2 to 9) -.TP -.BR \-n ", " \-\-nofsck -Do not perform fsck before extending filesystem when filesystem -requires it. You may need to use \fB\-\-force\fR to proceed with -this option. -.TP -.B \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.TP -.BR \-r ", " \-\-resizefs -Resize underlying filesystem together with the logical volume using -\fBfsadm\fR(8). -.TP -.B \-\-use\-policies -Resizes the logical volume according to configured policy. See -\fBlvm.conf\fR(5) for some details. - -.SH Examples -Extends the size of the logical volume "vg01/lvol10" by 54MiB on physical -volume /dev/sdk3. This is only possible if /dev/sdk3 is a member of -volume group vg01 and there are enough free physical extents in it: -.sp -.B lvextend \-L +54 /dev/vg01/lvol10 /dev/sdk3 - -Extends the size of logical volume "vg01/lvol01" by the amount of free -space on physical volume /dev/sdk3. This is equivalent to specifying -"\-l +100%PVS" on the command line: -.sp -.B lvextend /dev/vg01/lvol01 /dev/sdk3 - -Extends a logical volume "vg01/lvol01" by 16MiB using physical extents -/dev/sda:8\-9 and /dev/sdb:8\-9 for allocation of extents: -.sp -.B lvextend -L+16M vg01/lvol01 /dev/sda:8\-9 /dev/sdb:8\-9 - -.SH SEE ALSO -.BR fsadm (8), -.BR lvm (8), -.BR lvm.conf (5), -.BR lvcreate (8), -.BR lvconvert (8), -.BR lvreduce (8), -.BR lvresize (8), -.BR lvchange (8) diff --git a/man/lvm-config.8.des b/man/lvm-config.8.des new file mode 100644 index 000000000..1d365668d --- /dev/null +++ b/man/lvm-config.8.des @@ -0,0 +1,5 @@ +This command is the same as \fBlvmconfig\fP(8). + +lvm config produces formatted output from the LVM configuration tree. The +sources of the configuration data include \fBlvm.conf\fP(5) and command +line settings from \-\-config. diff --git a/man/lvm-config.8.in b/man/lvm-config.8.in deleted file mode 100644 index 5050d7770..000000000 --- a/man/lvm-config.8.in +++ /dev/null @@ -1 +0,0 @@ -.so man8/lvmconfig.8 diff --git a/man/lvm-dumpconfig.8.des b/man/lvm-dumpconfig.8.des new file mode 100644 index 000000000..18593fba5 --- /dev/null +++ b/man/lvm-dumpconfig.8.des @@ -0,0 +1,5 @@ +This command is the same as \fBlvmconfig\fP(8). + +lvm dumpconfig produces formatted output from the LVM configuration tree. The +sources of the configuration data include \fBlvm.conf\fP(5) and command +line settings from \-\-config. diff --git a/man/lvm-dumpconfig.8.in b/man/lvm-dumpconfig.8.in deleted file mode 100644 index 5050d7770..000000000 --- a/man/lvm-dumpconfig.8.in +++ /dev/null @@ -1 +0,0 @@ -.so man8/lvmconfig.8 diff --git a/man/lvm-fullreport.8.des b/man/lvm-fullreport.8.des new file mode 100644 index 000000000..f350a0aed --- /dev/null +++ b/man/lvm-fullreport.8.des @@ -0,0 +1,6 @@ +lvm fullreport produces formatted output about PVs, PV segments, VGs, LVs +and LV segments. The information is all gathered together for each VG +(under a per-VG lock) so it is consistent. Information gathered from +separate calls to \fBvgs\fP, \fBpvs\fP, and \fBlvs\fP can be inconsistent +if information changes between commands. + diff --git a/man/lvm-fullreport.8.in b/man/lvm-fullreport.8.in deleted file mode 100644 index 96ac937fe..000000000 --- a/man/lvm-fullreport.8.in +++ /dev/null @@ -1,145 +0,0 @@ -.TH LVM-FULLREPORT 8 "LVM TOOLS #VERSION#" "Red Hat, Inc" \" -*- nroff -*- -.SH NAME -lvm fullreport \(em Report information about PVs, PV segments, VGs, LVs and LV segments, all at once for each VG. -.SH SYNOPSIS -.B lvm fullreport -.RB [ \-a | \-\-all ] -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-logonly ] -.RB [ \-\-nameprefixes ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-rows ] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-\-unquoted ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RI [ VolumeGroupName -.RI [ VolumeGroupName ...]] -.SH DESCRIPTION -lvm fullreport produces formatted output about PVs, PV segments, VGs, LVs -and LV segments, all at once for each VG and guarded by per-VG lock -for consistency. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.B \-\-all -Include information in the output about internal Logical Volumes that -are components of normally-accessible Logical Volumes, such as mirrors, -but which are not independently accessible (e.g. not mountable). -The names of such Logical Volumes are enclosed within square brackets -in the output. For example, after creating a mirror using -.B lvcreate -m1 \-\-mirrorlog disk -, this option will reveal three internal Logical -Volumes, with suffixes mimage_0, mimage_1, and mlog. -.TP -.B \-\-aligned -Use with \fB\-\-separator\fP to align the output columns. -.TP -.B \-\-binary -Use binary values "0" or "1" instead of descriptive literal values -for columns that have exactly two valid values to report (not counting -the "unknown" value which denotes that the value could not be determined). -.TP -.B \-\-configreport \fI ReportName -Make any subsequent \fB\-o, \-\-options\fP, \fB\-O, \-\-sort\fP or -\fB\-S, \-\-select\fP to apply for \fIReportName\fP where \fIReportName\fP -is 'pv' for PV subreport, 'pvseg' for PV segment subreport, 'vg' for -VG subreport, 'lv' for LV subreport, 'seg' for LV segment subreport or 'log' -for log report. If \fB\-\-configreport\fP option is not used to identify a -report, then all command's subreports are assumed except log report. The log -report is available only if enabled by \fBlog/report_command_log\fP -\fBlvm.conf\fP(5) setting or if \fB\-\-logonly\fP option is used. -.TP -.B \-\-logonly -Suppress the main report itself and display only log report on output. -.TP -.B \-\-nameprefixes -Add an "LVM2_" prefix plus the field name to the output. Useful -with \fB\-\-noheadings\fP to produce a list of field=value pairs that can -be used to set environment variables (for example, in \fBudev\fP(7) rules). -.TP -.B \-\-noheadings -Suppress the headings line that is normally the first line of output. -Useful if grepping the output. -.TP -.B \-\-nosuffix -Suppress the suffix on output sizes. Use with \fB\-\-units\fP -(except h and H) if processing the output. -.TP -.BR \-o ", " \-\-options -Comma-separated ordered list of columns. -.IP -Precede the list with '\fI+\fP' to append to the current list -of columns, '\fI-\fP' to remove from the current list of columns -or '\fI#\fP' to compact given columns. The \fI\-o\fP option can -be repeated, providing several lists. These lists are evaluated -from left to right. -.IP -For the list of columns, see \fBpvs\fP(8), \fBvgs\fP(8), -\fBlvs\fP(8) man page or check \fBpvs\fP, \fBvgs\fP, \fBlvs -o help\fP -output. -.TP -.BR \-O ", " \-\-sort -Comma-separated ordered list of columns to sort by. Replaces the default -selection. Precede any column with '\fI\-\fP' for a reverse sort on that -column. -.TP -.B \-\-rows -Output columns as rows. -.TP -.BR \-S ", " \-\-select " " \fISelection -Display only rows that match Selection criteria. All rows are displayed with -the additional "selected" column (\fB-o selected\fP) showing 1 if the row -matches the Selection and 0 otherwise. The Selection criteria are defined -by specifying column names and their valid values (that can include reserved -values) while making use of supported comparison operators. See \fBlvm\fP(8) -and \fB\-S\fP, \fB\-\-select\fP description for more detailed information -about constructing the Selection criteria. As a quick help and to see full -list of column names that can be used in Selection including the list of -reserved values and the set of supported selection operators, check the -output of \fBpvs\fP, \fBvgs\fP, \fBlvs -S help\fP command. -.TP -.B \-\-separator \fISeparator -String to use to separate each column. Useful if grepping the output. -.TP -.B \-\-unbuffered -Produce output immediately without sorting or aligning the columns properly. -.TP -.B \-\-units \fIhHbBsSkKmMgGtTpPeE -All sizes are output in these units: (h)uman-readable, (b)ytes, (s)ectors, -(k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (p)etabytes, (e)xabytes. -Capitalise to use multiples of 1000 (S.I.) instead of 1024. Can also specify -custom units e.g. \-\-units 3M -.TP -.B \-\-unquoted -When used with \fB\-\-nameprefixes\fP, output values in the field=value -pairs are not quoted. -.SH SEE ALSO -.BR lvm (8), -.BR pvs (8), -.BR vgs (8), -.BR lvs (8) diff --git a/man/lvm-lvpoll.8.des b/man/lvm-lvpoll.8.des new file mode 100644 index 000000000..35c252231 --- /dev/null +++ b/man/lvm-lvpoll.8.des @@ -0,0 +1,4 @@ +lvm lvpoll is an internal command used by \fBlvmpolld\fP(8) to monitor and +complete \fBlvconvert\fP(8) and \fBpvmove\fP(8) operations. lvpoll itself +does not initiate these operations and should not normally need to be run +directly. diff --git a/man/lvm-lvpoll.8.end b/man/lvm-lvpoll.8.end new file mode 100644 index 000000000..eddb3641b --- /dev/null +++ b/man/lvm-lvpoll.8.end @@ -0,0 +1,33 @@ +.SH NOTES + +To find the name of the pvmove LV that was created by an original +\fBpvmove /dev/name\fP command, use the command: +.br +\fBlvs -a -S move_pv=/dev/name\fP. + +.SH EXAMPLES + +Continue polling a pvmove operation. +.br +.B lvm lvpoll --polloperation pvmove vg00/pvmove0 + +Abort a pvmove operation. +.br +.B lvm lvpoll --polloperation pvmove --abort vg00/pvmove0 + +Continue polling a mirror conversion. +.br +.B lvm lvpoll --polloperation convert vg00/lvmirror + +Continue mirror repair. +.br +.B lvm lvpoll --polloperation convert vg/damaged_mirror --handlemissingpvs + +Continue snapshot merge. +.br +.B lvm lvpoll --polloperation merge vg/snapshot_old + +Continue thin snapshot merge. +.br +.B lvm lvpoll --polloperation merge_thin vg/thin_snapshot + diff --git a/man/lvm-lvpoll.8.in b/man/lvm-lvpoll.8.in deleted file mode 100644 index 8ffbdd4d6..000000000 --- a/man/lvm-lvpoll.8.in +++ /dev/null @@ -1,89 +0,0 @@ -.TH "LVPOLL" "8" "LVM TOOLS #VERSION#" "Red Hat, Inc" \" -*- nroff -*- -.SH NAME -lvpoll \(em Internal command used by lvmpolld to complete some Logical Volume operations. - -.SH SYNOPSIS -.B lvm lvpoll -.BR \-\-polloperation -.RI { pvmove | convert | merge | merge_thin } -.RB [ \-\-abort ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-handlemissingpvs ] -.RB [ \-i | \-\-interval -.IR Seconds ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.IR LogicalVolume [ Path ] -.SH DESCRIPTION -\fBlvpoll\fP is an internal command used by \fBlvmpolld\fP(8) to monitor and -complete \fBlvconvert\fP(8) and \fBpvmove\fP(8) operations. -\fBlvpoll\fP itself does not initiate these operations and -you should never normally need to invoke it directly. - -.I LogicalVolume -The Logical Volume undergoing conversion or, in the case of pvmove, the name of -the internal pvmove Logical Volume (see \fBEXAMPLES\fP). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-\-polloperation " {" \fIconvert | \fImerge | \fImerge_thin | \fIpvmove } -Mandatory option. -\fIpvmove\fP refers to a pvmove operation that is moving data. -\fIconvert\fP refers to an operation that is increasing the number of redundant copies of data maintained by a mirror. -\fImerge\fP indicates a merge operation that doesn't involve thin volumes. -\fImerge_thin\fP indicates a merge operation involving thin snapshots. -\fBpvmove\fP(8) and \fBlvconvert\fP(8) describe how to initiate these operations. -.TP -.B \-\-abort -Abort pvmove in progress. See \fBpvmove\fP(8). -.TP -.B \-\-handlemissingpvs -Used when the polling operation needs to handle missing PVs to be able to -continue. This can happen when \fBlvconvert\fP(8) is repairing a mirror -with one or more faulty devices. -.TP -.BR \-i ", " \-\-interval " "\fISeconds -Report progress at regular intervals - -.SH EXAMPLES -Resume polling of a pvmove operation identified by the Logical Volume vg00/pvmove0: -.sp -.B lvm lvpoll --polloperation pvmove vg00/pvmove0 -.P -Abort the same pvmove operation: -.sp -.B lvm lvpoll --polloperation pvmove --abort vg00/pvmove0 -.P -To find out the name of the pvmove Logical Volume resulting from an original -\fBpvmove /dev/sda1\fP command you may use the following \fBlvs\fP command. -(Remove the parentheses from the LV name.) -.sp -.B lvs -a -S move_pv=/dev/sda1 -.P -Resume polling of mirror conversion vg00/lvmirror: -.sp -.B lvm lvpoll --polloperation convert vg00/lvmirror -.P -Complete mirror repair: -.sp -.B lvm lvpoll --polloperation convert vg/damaged_mirror --handlemissingpvs -.P -Process snapshot merge: -.sp -.B lvm lvpoll --polloperation merge vg/snapshot_old -.P -Finish thin snapshot merge: -.sp -.B lvm lvpoll --polloperation merge_thin vg/thin_snapshot -.SH SEE ALSO -.BR lvconvert (8), -.BR lvm (8), -.BR lvmpolld (8), -.BR lvs (8), -.BR pvmove (8) diff --git a/man/lvmchange.8.in b/man/lvmchange.8.in deleted file mode 100644 index dc6b3bd34..000000000 --- a/man/lvmchange.8.in +++ /dev/null @@ -1,10 +0,0 @@ -.TH LVMCHANGE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvmchange \(em change attributes of the logical volume manager -.SH SYNOPSIS -.B lvmchange -.SH DESCRIPTION -lvmchange is not currently supported under LVM2, although -\fBdmsetup\fP(8) has a \fBremove_all\fP command. -.SH SEE ALSO -.BR dmsetup (8) diff --git a/man/lvmconfig.8.des b/man/lvmconfig.8.des new file mode 100644 index 000000000..17f9f18e7 --- /dev/null +++ b/man/lvmconfig.8.des @@ -0,0 +1,3 @@ +lvmconfig produces formatted output from the LVM configuration tree. The +sources of the configuration data include \fBlvm.conf\fP(5) and command +line settings from \-\-config. diff --git a/man/lvmconfig.8.in b/man/lvmconfig.8.in deleted file mode 100644 index f4b6abd97..000000000 --- a/man/lvmconfig.8.in +++ /dev/null @@ -1,225 +0,0 @@ -.TH "LVMCONFIG" "8" "LVM TOOLS #VERSION#" "Red Hat, Inc" "\"" -.SH "NAME" -lvmconfig, lvm dumpconfig, lvm config \(em Display LVM configuration -.SH SYNOPSIS -. -.ad l -.B lvmconfig -.RB [ \-f | \-\-file -.IR Filename ] -.RB [ \-\-type -.RB { current | default | diff | full |\: list | missing | new \c -.RB | profilable | profilable-command | profilable-metadata }] -.RB [ \-\-atversion -.IR Version ] -.RB [ \-\-sinceversion -.IR Version ] -.RB [ \-\-ignoreadvanced ] -.RB [ \-\-ignoreunsupported ] -.RB [ \-\-ignorelocal ] -.RB [ \-l | \-\-list ] -.RB [ \-\-config -.IR ConfigurationString ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-\-profile -.IR ProfileName ] -.RB [ \-\-metadataprofile -.IR ProfileName ] -.RB [ \-\-mergedconfig ] -.RB [ \-\-showdeprecated ] -.RB [ \-\-showunsupported ] -.RB [ \-\-validate ] -.RB [ \-\-withsummary ] -.RB [ \-\-withcomments ] -.RB [ \-\-withspaces ] -.RB [ \-\-withversions ] -.RB [ ConfigurationNode... ] -.ad b -. -.SH DESCRIPTION -lvmconfig produces formatted output from the LVM configuration tree. -The command was added in release 2.02.119 and has an identical longer form -\fBlvm dumpconfig\fP. - -.SH OPTIONS -.TP -.BR \-f ", " \-\-file " \fIFilename" -Send output to a file named 'filename'. - -.TP -.BR \-l ", " \-\-list -List configuration settings with summarizing comment. This is the same as using -\fBlvmconfig --type list --withsummary\fP. - -.TP -.BR \-\-type " {" current | default | diff | full | missing | new | profilable |\: profilable-command | profilable-metadata } -Select the type of configuration to display. The configuration settings -displayed have either default values or currently-used values assigned based on -the type selected. If no type is selected, \fB\-\-type current\fP is used -by default. Whenever a configuration setting with a default value is -commented out, it means the setting does not have any concrete default -value defined. Output can be saved and used as a proper \fBlvm.conf\fP(5) -file. -.RS -.IP \fBcurrent\fP 3 -Display the current \fBlvm.conf\fP configuration merged with any \fBtag -config\fP if used. See also \fBlvm.conf\fP(5) for more info about LVM -configuration methods. -.IP \fBdefault\fP 3 -Display all possible configuration settings with default values assigned. -.IP \fBdiff\fP 3 -Display all configuration settings for which the values used differ from defaults. -The value assigned for each configuration setting is the value currently used. -Using this type also implies the use of \fB\-\-mergedconfig\fP option. -This is actually minimal LVM configuration which can be used without -a change to current configured behaviour. -.IP \fBfull\fP 3 -Display full configuration tree - a combination of current configuration tree -(\fB\-\-type current\fP) and tree of settings for which default values are -used (\fB\-\-type missing\fP). This is exactly the configuration tree that -LVM2 uses during command execution. Using this type also implies -the use of \fB\-\-mergedconfig\fP option. If comments are displayed -(see \fB\-\-withcomments\fP and \fB\-\-withsummary\fP options), then -for each setting found in existing configuration and for which defaults -are not used, there's an extra comment line printed to denote this. -.IP \fBlist\fP 3 -Display plain list of configuration settings. -.IP \fBmissing\fP 3 -Display all configuration settings with default values assigned which are -missing in the configuration currently used and for which LVM automatically -fallbacks to using these default values. -.IP \fBnew\fP 3 -Display all new configuration settings introduced in current LVM version -or specific version as defined by \fB\-\-atversion\fP option. -.IP \fBprofilable\fP 3 -Display all profilable configuration settings with default values assigned. -See \fBlvm.conf\fP(5) for more info about \fBprofile config\fP method. -.IP \fBprofilable-command\fP 3 -Display all profilable configuration settings with default values assigned -that can be used in command profile. This is a subset of settings displayed -by \fB\-\-type profilable\fP. -.IP \fBprofilable-metadata\fP 3 -Display all profilable configuration settings with default values assigned -that can be used in metadata profile. This is a subset of settings displayed -by \fB\-\-type profilable\fP. -.RE - -.TP -.BI \-\-atversion " Version" -Specify an LVM version in x.y.z format where x is the major version, -the y is the minor version and z is the patchlevel (e.g. 2.2.106). -When configuration is displayed, the configuration settings recognized -at this LVM version will be considered only. This can be used -to display a configuration that a certain LVM version understands and -which does not contain any newer settings for which LVM would -issue a warning message when checking the configuration. - -.TP -.BI \-\-sinceversion " Version" -Specify an LVM version in x.y.z format where x is the major version, -the y is the minor version and z is the patchlevel (e.g. 2.2.106). -This option is currently applicable only with \fB\-\-type new\fP -to display all configuration settings introduced since given version. - -.TP -.B \-\-ignoreadvanced -Exclude advanced configuration settings from the output. - -.TP -.B \-\-ignoreunsupported -Exclude unsupported configuration settings from the output. These settings are -either used for debugging and development purposes only or their support is not -yet complete and they are not meant to be used in production. The \fBcurrent\fP -and \fBdiff\fP types include unsupported settings in their output by default, -all the other types ignore unsupported settings. - -.TP -.B \-\-ignorelocal -Ignore local section. - -.TP -.BI \-\-config " ConfigurationString" -Use \fIConfigurationString\fP to override existing configuration. -This configuration is then applied for the lvmconfig command itself. -See also \fBlvm.conf\fP(5) for more info about \fBconfig cascade\fP. - -.TP -.BI \-\-commandprofile " ProfileName" -Use \fIProfileName\fP to override existing configuration. -This configuration is then applied for the lvmconfig command itself. -See also \fB\-\-mergedconfig\fP option and \fBlvm.conf\fP(5) for -more info about \fBconfig cascade\fP. - -.TP -.BI \-\-profile " ProfileName" -The same as using \fB\-\-commandprofile\fP but the configuration is not -applied for the lvmconfig command itself. - -.TP -.BI \-\-metadataprofile " ProfileName" -Use \fIProfileName\fP to override existing configuration. -The configuration defined in metadata profile has no effect for -the lvmconfig command itself. lvmconfig displays the configuration only. -See also \fB\-\-mergedconfig\fP option and \fBlvm.conf\fP(5) for more -info about \fBconfig cascade\fP. - -.TP -.B \-\-mergedconfig -When the lvmconfig command is run with the \fB\-\-config\fP option -and/or \fB\-\-commandprofile\fP (or using \fBLVM_COMMAND_PROFILE\fP -environment variable), \fB\-\-profile\fP, \fB\-\-metadataprofile\fP -option, merge all the contents of the \fBconfig cascade\fP before displaying it. -Without the \fB\-\-mergeconfig\fP option used, only the configuration at -the front of the cascade is displayed. See also \fBlvm.conf\fP(5) for more -info about \fBconfig cascade\fP. - -.TP -.B \-\-showdeprecated -Include deprecated configuration settings in the output. These settings -are always deprecated since certain version. If concrete version is specified -with \fB--atversion\fP option, deprecated settings are automatically included -if specified version is lower that the version in which the settings were -deprecated. The \fBcurrent\fP and \fBdiff\fP types include deprecated settings -int their output by default, all the other types ignore deprecated settings. - -.TP -.B \-\-showunsupported -Include unsupported configuration settings in the output. These settings -are either used for debugging or development purposes only or their support -is not yet complete and they are not meant to be used in production. The -\fBcurrent\fP and \fBdiff\fP types include unsupported settings in their -output by default, all the other types ignore unsupported settings. - -.TP -.B \-\-validate -Validate current configuration used and exit with appropriate -return code. The validation is done only for the configuration -at the front of the \fBconfig cascade\fP. To validate the whole -merged configuration tree, use also the \fB\-\-mergedconfig\fP option. -The validation is done even if \fBconfig/checks\fP \fBlvm.conf\fP(5) -option is disabled. - -.TP -.B \-\-withsummary -Display a one line comment for each configuration node. - -.TP -.B \-\-withcomments -Display a full comment for each configuration node. For deprecated -settings, also display comments about deprecation in addition. - -.TP -.B \-\-withspaces -Where appropriate, add more spaces in output for better readability. - -.TP -.B \-\-withversions -Also display a comment containing the version of introduction for -each configuration node. If the setting is deprecated, also display -the version since which it is deprecated. - -.SH SEE ALSO -.BR lvm (8) -.BR lvmconf (8) -.BR lvm.conf (5) diff --git a/man/lvmdiskscan.8.des b/man/lvmdiskscan.8.des new file mode 100644 index 000000000..c1e87cca5 --- /dev/null +++ b/man/lvmdiskscan.8.des @@ -0,0 +1,7 @@ +lvmdiskscan scans all SCSI, (E)IDE disks, multiple devices and a bunch of +other block devices in the system looking for LVM PVs. The size reported +is the real device size. Define a filter in \fBlvm.conf\fP(5) to restrict +the scan to avoid a CD ROM, for example. + +This command is deprecated, use \fBpvs\fP instead. + diff --git a/man/lvmdiskscan.8.in b/man/lvmdiskscan.8.in deleted file mode 100644 index 6de34c1f4..000000000 --- a/man/lvmdiskscan.8.in +++ /dev/null @@ -1,27 +0,0 @@ -.TH LVMDISKSCAN 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvmdiskscan \(em scan for all devices visible to LVM2 -.SH SYNOPSIS -.B lvmdiskscan -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-l | \-\-lvmpartition ] -.RB [ \-v | \-\-verbose ] -.SH DESCRIPTION -lvmdiskscan scans all SCSI, (E)IDE disks, multiple devices and a bunch -of other block devices in the system looking for LVM physical volumes. -The size reported is the real device size. -Define a filter in \fBlvm.conf\fP(5) to restrict -the scan to avoid a CD ROM, for example. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-l ", " \-\-lvmpartition -Only reports Physical Volumes. -.SH SEE ALSO -.BR lvm (8), -.BR lvm.conf (5), -.BR pvscan (8), -.BR vgscan (8) diff --git a/man/lvmlockd.8.in b/man/lvmlockd.8.in index f01c69574..6e9b703cc 100644 --- a/man/lvmlockd.8.in +++ b/man/lvmlockd.8.in @@ -573,25 +573,37 @@ To place the lvmlock LV on a specific device, create the VG with only that device, then use vgextend to add other devices. -.SS shared LVs +.SS LV activation -When an LV is used concurrently from multiple hosts (e.g. by a -multi\-host/cluster application or file system), the LV can be activated -on multiple hosts concurrently using a shared lock. +In a shared VG, activation changes involve locking through lvmlockd, and +the following values are possible with lvchange/vgchange -a: -To activate the LV with a shared lock: lvchange \-asy vg/lv. +.IP \fBy\fP|\fBey\fP +The command activates the LV in exclusive mode, allowing a single host +to activate the LV. Before activating the LV, the command uses lvmlockd +to acquire an exclusive lock on the LV. If the lock cannot be acquired, +the LV is not activated and an error is reported. This would happen if +the LV is active on another host. -With lvmlockd, an unspecified activation mode is always exclusive, i.e. -\-ay defaults to \-aey. - -If the LV type does not allow the LV to be used concurrently from multiple -hosts, then a shared activation lock is not allowed and the lvchange -command will report an error. LV types that cannot be used concurrently +.IP \fBsy\fP +The command activates the LV in shared mode, allowing multiple hosts to +activate the LV concurrently. Before activating the LV, the +command uses lvmlockd to acquire a shared lock on the LV. If the lock +cannot be acquired, the LV is not activated and an error is reported. +This would happen if the LV is active exclusively on another host. If the +LV type prohibits shared access, such as a snapshot, the command will +report an error and fail. +The shared mode is intended for a multi\-host/cluster application or +file system. +LV types that cannot be used concurrently from multiple hosts include thin, cache, raid, mirror, and snapshot. - lvextend on LV with shared locks is not yet allowed. The LV must be deactivated, or activated exclusively to run lvextend. +.IP \fBn\fP +The command deactivates the LV. After deactivating the LV, the command +uses lvmlockd to release the current lock on the LV. + .SS recover from lost PV holding sanlock locks diff --git a/man/lvmsadc.8.des b/man/lvmsadc.8.des new file mode 100644 index 000000000..e4cfd8d34 --- /dev/null +++ b/man/lvmsadc.8.des @@ -0,0 +1,3 @@ +lvmsadc is not currently supported in LVM. The device-mapper statistics +facility provides similar performance metrics using the \fBdmstats(8)\fP +command. diff --git a/man/lvmsadc.8.in b/man/lvmsadc.8.in deleted file mode 100644 index 81d2b6611..000000000 --- a/man/lvmsadc.8.in +++ /dev/null @@ -1,16 +0,0 @@ -.TH "LVMSADC" "8" "LVM TOOLS #VERSION#" "Red Hat, Inc" "\"" - -.SH "NAME" -lvmsadc \(em LVM system activity data collector - -.SH "SYNOPSIS" -.B lvmsadc - -.SH "DESCRIPTION" -lvmsadc is not currently supported under LVM2: the device-mapper statistics -facility provides similar performance metrics using the \fBdmstats(8)\fP -command. - -.SH "SEE ALSO" -.BR dmstats (8) -.BR lvm (8) diff --git a/man/lvmsar.8.des b/man/lvmsar.8.des new file mode 100644 index 000000000..3177506ea --- /dev/null +++ b/man/lvmsar.8.des @@ -0,0 +1,3 @@ +lvmsar is not currently supported in LVM. The device-mapper statistics +facility provides similar performance metrics using the \fBdmstats(8)\fP +command. diff --git a/man/lvmsar.8.in b/man/lvmsar.8.in deleted file mode 100644 index fca111fa4..000000000 --- a/man/lvmsar.8.in +++ /dev/null @@ -1,16 +0,0 @@ -.TH "LVMSAR" "8" "LVM TOOLS #VERSION#" "Red Hat, Inc" "\"" - -.SH "NAME" -lvmsar \(em LVM system activity reporter - -.SH "SYNOPSIS" -.B lvmsar - -.SH "DESCRIPTION" -lvmsar is not currently supported under LVM2: the device-mapper statistics -facility provides similar performance metrics using the \fBdmstats(8)\fP -command. - -.SH "SEE ALSO" -.BR dmstats (8) -.BR lvm (8) diff --git a/man/lvreduce.8.des b/man/lvreduce.8.des new file mode 100644 index 000000000..7f0ba0cd8 --- /dev/null +++ b/man/lvreduce.8.des @@ -0,0 +1,14 @@ +lvreduce reduces the size of an LV. The freed logical extents are returned +to the VG to be used by other LVs. A copy\-on\-write snapshot LV can also +be reduced if less space is needed to hold COW blocks. Use +\fBlvconvert\fP(8) to change the number of data images in a RAID or +mirrored LV. + +Be careful when reducing an LV's size, because data in the reduced area is +lost. Ensure that any file system on the LV is resized \fBbefore\fP +running lvreduce so that the removed extents are not in use by the file +system. + +Sizes will be rounded if necessary. For example, the LV size must be an +exact number of extents, and the size of a striped segment must be a +multiple of the number of stripes. diff --git a/man/lvreduce.8.end b/man/lvreduce.8.end new file mode 100644 index 000000000..59fde52f0 --- /dev/null +++ b/man/lvreduce.8.end @@ -0,0 +1,5 @@ +.SH EXAMPLES + +Reduce the size of an LV by 3 logical extents: +.br +.B lvreduce \-l \-3 vg00/lvol1 diff --git a/man/lvreduce.8.in b/man/lvreduce.8.in deleted file mode 100644 index edf0c920c..000000000 --- a/man/lvreduce.8.in +++ /dev/null @@ -1,110 +0,0 @@ -.TH LVREDUCE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvreduce \(em reduce the size of a logical volume -.SH SYNOPSIS -.B lvreduce -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-f | \-\-force ] -.RB [ \-\-noudevsync ] -.RB { \-l | \-\-extents -.RI [ \- ] LogicalExtentsNumber [ % { VG | LV | FREE | ORIGIN }] -.RB | -.BR \-L | \-\-size -.RI [ \- ] LogicalVolumeSize [ bBsSkKmMgGtTpPeE ]} -.RB [ \-n | \-\-nofsck ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-r | \-\-resizefs ] -.IR LogicalVolume { Name | Path } -.SH DESCRIPTION -lvreduce allows you to reduce the size of a logical volume. -Be careful when reducing a logical volume's size, because data in the -reduced part is lost!!! -.br -You should therefore ensure that any filesystem on the volume is -resized -.I before -running lvreduce so that the extents that are to be removed are not in use. -.br -Shrinking snapshot logical volumes (see -.BR lvcreate (8) -for information to create snapshots) is supported as well. -But to change the number of copies in a mirrored logical -volume use -.BR lvconvert (8). -.br -Sizes will be rounded if necessary - for example, the volume size must -be an exact number of extents and the size of a striped segment must -be a multiple of the number of stripes. -.br -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-f ", " \-\-force -Force size reduction without prompting even when it may cause data loss. -.TP -.IR \fB\-l ", " \fB\-\-extents " [" \- ] LogicalExtentsNumber [ % { VG | LV | FREE | ORIGIN }] -Reduce or set the logical volume size in units of logical extents. -With the \fI-\fP sign the value will be subtracted from -the logical volume's actual size and without it the value will be taken -as an absolute size. -The total number of physical extents freed will be greater than this logical -value if, for example, the volume is mirrored. -The number can also be expressed as a percentage of the total space -in the Volume Group with the suffix \fI%VG\fP, relative to the existing -size of the Logical Volume with the suffix \fI%LV\fP, as a percentage of the -remaining free space in the Volume Group with the suffix \fI%FREE\fP, or (for -a snapshot) as a percentage of the total space in the Origin Logical -Volume with the suffix \fI%ORIGIN\fP. -The resulting value for the subtraction is rounded downward, for the absolute -size it is rounded upward. -N.B. In a future release, when expressed as a percentage with VG or FREE, the -number will be treated as an approximate total number of physical extents to be -freed (including extents used by any mirrors, for example). The code may -currently release more space than you might otherwise expect. -.TP -.IR \fB\-L ", " \fB\-\-size " [" \- ] LogicalVolumeSize [ bBsSkKmMgGtTpPeE ] -Reduce or set the logical volume size in units of megabytes. -A size suffix of \fIk\fP for kilobyte, \fIm\fP for megabyte, -\fIg\fP for gigabytes, \fIt\fP for terabytes, \fIp\fP for petabytes -or \fIe\fP for exabytes is optional. -With the \fI\-\fP sign the value will be subtracted from -the logical volume's actual size and without it it will be taken as -an absolute size. -.TP -.BR \-n ", " \-\-nofsck -Do not perform fsck before resizing filesystem when filesystem -requires it. You may need to use \fB\-\-force\fR to proceed with -this option. -.TP -.BR \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.TP -.BR \-r ", " \-\-resizefs -Resize underlying filesystem together with the logical volume using -.BR fsadm (8). -.SH Examples -Reduce the size of logical volume lvol1 in volume group vg00 by 3 logical extents: -.sp -.B lvreduce \-l \-3 vg00/lvol1 -.SH SEE ALSO -.BR fsadm (8), -.BR lvchange (8), -.BR lvconvert (8), -.BR lvcreate (8), -.BR lvextend (8), -.BR lvm (8), -.BR lvresize (8), -.BR vgreduce (8) diff --git a/man/lvremove.8.des b/man/lvremove.8.des new file mode 100644 index 000000000..d049c635f --- /dev/null +++ b/man/lvremove.8.des @@ -0,0 +1,22 @@ +lvremove removes one or more LVs. For standard LVs, this returns the +logical extents that were used by the LV to the VG for use by other LVs. + +Confirmation will be requested before deactivating any active LV prior to +removal. LVs cannot be deactivated or removed while they are open (e.g. +if they contain a mounted filesystem). Removing an origin LV will also +remove all dependent snapshots. + +\fBHistorical LVs\fP + +If the configuration setting \fBmetadata/record_lvs_history\fP is enabled +and the LV being removed forms part of the history of at least one LV that +is still present, then a simplified representation of the LV will be +retained. This includes the time of removal (\fBlv_time_removed\fP +reporting field), creation time (\fBlv_time\fP), name (\fBlv_name\fP), LV +uuid (\fBlv_uuid\fP) and VG name (\fBvg_name\fP). This allows later +reporting to see the ancestry chain of thin snapshot volumes, even after +some intermediate LVs have been removed. The names of such historical LVs +acquire a hyphen as a prefix (e.g. '-lvol1') and cannot be reactivated. +Use lvremove a second time, with the hyphen, to remove the record of the +former LV completely. + diff --git a/man/lvremove.8.end b/man/lvremove.8.end new file mode 100644 index 000000000..5c70ed644 --- /dev/null +++ b/man/lvremove.8.end @@ -0,0 +1,11 @@ +.SH EXAMPLES + +Remove an active LV without asking for confirmation. +.br +.B lvremove \-f vg00/lvol1 + +Remove all LVs the specified VG. +.br +.B lvremove vg00 + + diff --git a/man/lvremove.8.in b/man/lvremove.8.in deleted file mode 100644 index fe9375c48..000000000 --- a/man/lvremove.8.in +++ /dev/null @@ -1,80 +0,0 @@ -.TH LVREMOVE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvremove \(em remove a logical volume -.SH SYNOPSIS -.B lvremove -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-\-nohistory ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-f | \-\-force ] -.RB [ \-\-noudevsync ] -.RI [ LogicalVolume { Name | Path }...] -.SH DESCRIPTION -lvremove removes one or more logical volumes. -Confirmation will be requested before deactivating any active logical -volume prior to removal. Logical volumes cannot be deactivated -or removed while they are open (e.g. if they contain a mounted filesystem). -Removing an origin logical volume will also remove all dependent snapshots. -.sp -If the logical volume is clustered then it must be deactivated on all -nodes in the cluster before it can be removed. A single lvchange command -issued from one node can do this. -.sp -If the configuration setting \fBmetadata/record_lvs_history\fP is enabled -and the logical volume being removed forms part of the history of at least -one logical volume that is still present then a simplified representation of -the logical volume will be retained. This includes the time of removal -(\fBlv_time_removed\fP reporting field), creation time (\fBlv_time\fP), name -(\fBlv_name\fP), LV uuid (\fBlv_uuid\fP) and VG name (\fBvg_name\fP) and -allows you to see the ancestry chain of thin snapshot volumes even after -some intermediate logical volumes have been removed. -The names of such historical logical volumes acquire a hyphen as a prefix -(e.g. '-lvol1') and cannot be reactivated. Use lvremove a second time, -with the hyphen, to remove the record of the former logical volume completely. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-f ", " \-\-force -Remove active logical volumes without confirmation. -Tool will try to deactivate \fIunused\fP volume. -To proceed with damaged pools use \-ff -.TP -.B \-\-nohistory -Disable the recording of history of logical volumes which are being removed. -(This has no effect unless the configuration setting -\fBmetadata/record_lvs_history\fP is enabled.) -.TP -.B \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.SH Examples -Remove the active logical volume lvol1 in volume group vg00 -without asking for confirmation: -.sp -.B lvremove \-f vg00/lvol1 -.sp -Remove all logical volumes in volume group vg00: -.sp -.B lvremove vg00 -.SH SEE ALSO -.BR lvcreate (8), -.BR lvdisplay (8), -.BR lvchange (8), -.BR lvm (8), -.BR lvs (8), -.BR lvscan (8), -.BR vgremove (8) diff --git a/man/lvrename.8.des b/man/lvrename.8.des new file mode 100644 index 000000000..a8455fc70 --- /dev/null +++ b/man/lvrename.8.des @@ -0,0 +1,2 @@ +lvrename renames an existing LV or a historical LV (see \fBlvremove\fP for +historical LV information.) diff --git a/man/lvrename.8.end b/man/lvrename.8.end new file mode 100644 index 000000000..3409b8a8c --- /dev/null +++ b/man/lvrename.8.end @@ -0,0 +1,10 @@ +.SH EXAMPLES + +Rename "lvold" to "lvnew": +.br +.B lvrename /dev/vg02/lvold vg02/lvnew + +An alternate syntax to rename "lvold" to "lvnew": +.br +.B lvrename vg02 lvold lvnew + diff --git a/man/lvrename.8.in b/man/lvrename.8.in deleted file mode 100644 index de6e51940..000000000 --- a/man/lvrename.8.in +++ /dev/null @@ -1,51 +0,0 @@ -.TH LVRENAME 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvrename \(em rename a logical volume -.SH SYNOPSIS -.B lvrename -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-f | \-\-force ] -.RB [ \-\-noudevsync ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RI { OldLogicalVolume { Name | Path } -.IR NewLogicalVolume { Name | Path } -| -.I VolumeGroupName OldLogicalVolumeName NewLogicalVolumeName\fR} -.SH DESCRIPTION -lvrename renames an existing logical volume or an existing -historical logical volume from -.IR OldLogicalVolume { Name | Path } -to -.IR NewLogicalVolume { Name | Path }. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.SH EXAMPLE -To rename lvold in volume group vg02 to lvnew: -.sp -.B lvrename /dev/vg02/lvold vg02/lvnew -.sp -An alternate syntax to rename this logical volume is: -.sp -.B lvrename vg02 lvold lvnew -.sp -.SH SEE ALSO -.BR lvm (8), -.BR lvchange (8), -.BR vgcreate (8), -.BR vgrename (8) diff --git a/man/lvresize.8.des b/man/lvresize.8.des new file mode 100644 index 000000000..7fdcacc6f --- /dev/null +++ b/man/lvresize.8.des @@ -0,0 +1,2 @@ +lvresize resizes an LV in the same way as lvextend and lvreduce. See +\fBlvextend\fP(8) and \fBlvreduce\fP(8) for more information. diff --git a/man/lvresize.8.end b/man/lvresize.8.end new file mode 100644 index 000000000..a336d6216 --- /dev/null +++ b/man/lvresize.8.end @@ -0,0 +1,6 @@ +.SH EXAMPLES + +Extend an LV by 16MB using specific physical extents: +.br +.B lvresize \-L+16M vg1/lv1 /dev/sda:0\-1 /dev/sdb:0\-1 + diff --git a/man/lvresize.8.in b/man/lvresize.8.in deleted file mode 100644 index 9cdb787d8..000000000 --- a/man/lvresize.8.in +++ /dev/null @@ -1,124 +0,0 @@ -.TH LVRESIZE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvresize \(em resize a logical volume -.SH SYNOPSIS -.B lvresize -.RB [ \-\-alloc " " \fIAllocationPolicy ] -.RB [ \-\-noudevsync ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-i | \-\-stripes " " \fIStripes -.RB [ \-I | \-\-stripesize " " \fIStripeSize ]] -.RB { \-l | \-\-extents -.RI [ + | \- ] LogicalExtentsNumber [ % { VG | LV | PVS | FREE | ORIGIN "}] |" -.BR \-L | \-\-size -.RI [ + | \- ] LogicalVolumeSize [ bBsSkKmMgGtTpPeE ]} -.RB [ \-\-poolmetadatasize -.RI [ + ] MetadataVolumeSize [ bBsSkKmMgG ]] -.RB [ \-f | \-\-force ] -.RB [ \-n | \-\-nofsck ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-r | \-\-resizefs ] -.IR LogicalVolume { Name | Path } -.RI [ PhysicalVolumePath [ :PE [ \-PE ]]...] -.SH DESCRIPTION -lvresize allows you to resize a logical volume. -Be careful when reducing a logical volume's size, because data in the reduced -part is lost!!! -You should therefore ensure that any filesystem on the volume is -shrunk first so that the extents that are to be removed are not in use. -Resizing snapshot logical volumes (see -.BR lvcreate (8) -for information about creating snapshots) is supported as well. -But to change the number of copies in a mirrored logical -volume use -.BR lvconvert (8). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-f ", " \-\-force -Force resize without prompting even when it may cause data loss. -.TP -.BR \-n ", " \-\-nofsck -Do not perform fsck before resizing filesystem when filesystem -requires it. You may need to use \fB\-\-force\fR to proceed with -this option. -.TP -.BR \-r ", " \-\-resizefs -Resize underlying filesystem together with the logical volume using -\fBfsadm\fR(8). -.TP -.IR \fB\-l ", " \fB\-\-extents " [" + | \- ] LogicalExtentsNumber [ % { VG | LV | PVS | FREE | ORIGIN }] -Change or set the logical volume size in units of logical extents. -With the \fI+\fP or \fI\-\fP sign the value is added to or subtracted from the actual size -of the logical volume and without it, the value is taken as an absolute one. -The total number of physical extents affected will be -greater than this if, for example, the volume is mirrored. -The number can also be expressed as a percentage of the total space -in the Volume Group with the suffix \fI%VG\fP, relative to the existing -size of the Logical Volume with the suffix \fI%LV\fP, as a percentage of -the remaining free space of the PhysicalVolumes on the command line with the -suffix \fI%PVS\fP, as a percentage of the remaining free space in the -Volume Group with the suffix \fI%FREE\fP, or (for a snapshot) as a percentage -of the total space in the Origin Logical Volume with the suffix \fI%ORIGIN\fP. -The resulting value is rounded downward for the subtraction otherwise -it is rounded upward. -N.B. In a future release, when expressed as a percentage with PVS, VG or FREE, -the number will be treated as an approximate total number of physical extents -to be allocated or freed (including extents used by any mirrors, for example). -The code may currently allocate or remove more space than you might otherwise -expect. -.TP -.IR \fB\-L ", " \fB\-\-size " [" + | \- ] LogicalVolumeSize [ bBsSkKmMgGtTpPeE ] -Change or set the logical volume size in units of megabytes. -A size suffix of \fIM\fP for megabytes, -\fIG\fP for gigabytes, \fIT\fP for terabytes, \fIP\fP for petabytes -or \fIE\fP for exabytes is optional. -With the \fI+\fP or \fI\-\fP sign the value is added or subtracted -from the actual size of the logical volume and rounded -to the full extent size and without it, -the value is taken as an absolute one. -.TP -.BR \-i ", " \-\-stripes " " \fIStripes -Gives the number of stripes to use when extending a Logical Volume. -Defaults to whatever the last segment of the Logical Volume uses. -Not applicable to LVs using the original metadata LVM format, which must -use a single value throughout. -.TP -.IR \fB\-\-poolmetadatasize " [" + ] MetadataVolumeSize [ bBsSkKmMgG ] -Change or set the thin pool metadata logical volume size. -With the \fI+\fP sign the value is added to the actual size -of the metadata volume and rounded to the full extent size -and without it, the value is taken as an absolute one. -Maximal size is 16GiB. Default unit is megabytes. -.TP -.BR \-I ", " \-\-stripesize " " \fIStripeSize -Gives the number of kilobytes for the granularity of the stripes. -Defaults to whatever the last segment of the Logical Volume uses. -Not applicable to LVs using the original metadata LVM format, which -must use a single value throughout. -.br -StripeSize must be 2^n (n = 2 to 9) for metadata in LVM1 format. -For metadata in LVM2 format, the stripe size may be a larger -power of 2 but must not exceed the physical extent size. -.TP -.B \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.SH EXAMPLES -.br -Extend a logical volume vg1/lv1 by 16MB using physical extents -/dev/sda:0\-1 and /dev/sdb:0\-1 for allocation of extents: -.sp -.B lvresize \-L+16M vg1/lv1 /dev/sda:0\-1 /dev/sdb:0\-1 -.SH SEE ALSO -.BR fsadm (8), -.BR lvm (8), -.BR lvconvert (8), -.BR lvcreate (8), -.BR lvreduce (8), -.BR lvchange (8) diff --git a/man/lvs.8.des b/man/lvs.8.des new file mode 100644 index 000000000..5f8076447 --- /dev/null +++ b/man/lvs.8.des @@ -0,0 +1 @@ +lvs produces formatted output about LVs. diff --git a/man/lvs.8.end b/man/lvs.8.end new file mode 100644 index 000000000..d71f7c124 --- /dev/null +++ b/man/lvs.8.end @@ -0,0 +1,75 @@ +.SH NOTES +. +The lv_attr bits are: +.IP 1 3 +Volume type: (C)ache, (m)irrored, (M)irrored without initial sync, (o)rigin, +(O)rigin with merging snapshot, (r)aid, (R)aid without initial sync, +(s)napshot, merging (S)napshot, (p)vmove, (v)irtual, +mirror or raid (i)mage, mirror or raid (I)mage out-of-sync, mirror (l)og device, +under (c)onversion, thin (V)olume, (t)hin pool, (T)hin pool data, raid or +pool m(e)tadata or pool metadata spare. +.IP 2 3 +Permissions: (w)riteable, (r)ead-only, (R)ead-only activation of non-read-only +volume +.IP 3 3 +Allocation policy: (a)nywhere, (c)ontiguous, (i)nherited, c(l)ing, (n)ormal +This is capitalised if the volume is currently locked against allocation +changes, for example during +.BR pvmove (8). +.IP 4 3 +fixed (m)inor +.IP 5 3 +State: (a)ctive, (h)istorical, (s)uspended, (I)nvalid snapshot, +invalid (S)uspended snapshot, snapshot (m)erge failed, +suspended snapshot (M)erge failed, mapped (d)evice present without tables, +mapped device present with (i)nactive table, thin-pool (c)heck needed, +suspended thin-pool (C)heck needed, (X) unknown +.IP 6 3 +device (o)pen, (X) unknown +.IP 7 3 +Target type: (C)ache, (m)irror, (r)aid, (s)napshot, (t)hin, (u)nknown, (v)irtual. +This groups logical volumes related to the same kernel target together. So, +for example, mirror images, mirror logs as well as mirrors themselves appear as +(m) if they use the original device-mapper mirror kernel driver; whereas the raid +equivalents using the md raid kernel driver all appear as (r). +Snapshots using the original device-mapper driver appear as (s); whereas +snapshots of thin volumes using the new thin provisioning driver appear as (t). +.IP 8 3 +Newly-allocated data blocks are overwritten with blocks of (z)eroes before use. +.IP 9 3 +Volume Health, where there are currently three groups of attributes identified: +.IP +Common ones for all Logical Volumes: (p)artial, (X) unknown. +.br +(p)artial signifies that one or more of the Physical Volumes this Logical +Volume uses is missing from the system. (X) unknown signifies the status +is unknown. +.IP +Related to RAID Logical Volumes: (r)efresh needed, (m)ismatches exist, (w)ritemostly. +.br +(r)efresh signifies that one or more of the Physical Volumes this RAID Logical +Volume uses had suffered a write error. The write error could be due to a +temporary failure of that Physical Volume or an indication that it is failing. +The device should be refreshed or replaced. (m)ismatches signifies that the +RAID logical volume has portions of the array that are not coherent. +Inconsistencies are detected by initiating a "check" on a RAID logical volume. +(The scrubbing operations, "check" and "repair", can be performed on a RAID +logical volume via the 'lvchange' command.) (w)ritemostly signifies the +devices in a RAID 1 logical volume that have been marked write-mostly. +.IP +Related to Thin pool Logical Volumes: (F)ailed, out of (D)ata space, +(M)etadata read only. +.br +(F)ailed is set if thin pool encounters serious failures and hence no further I/O +is permitted at all. The out of (D)ata space is set if thin pool has run out of +data space. (M)etadata read only signifies that thin pool encounters certain +types of failures but it's still possible to do reads at least, +but no metadata changes are allowed. +.IP +Related to Thin Logical Volumes: (F)ailed. +.br +(F)ailed is set when related thin pool enters Failed state and no further I/O +is permitted at all. +.IP 10 3 +s(k)ip activation: this volume is flagged to be skipped during activation. + diff --git a/man/lvs.8.in b/man/lvs.8.in deleted file mode 100644 index 48ef8665d..000000000 --- a/man/lvs.8.in +++ /dev/null @@ -1,290 +0,0 @@ -.TH LVS 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvs \(em report information about logical volumes -.SH SYNOPSIS -.B lvs -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-a | \-\-all ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-H | \-\-history ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-logonly ] -.RB [ \-\-nameprefixes ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RI [ + | \- ] Key1 [,[ + | \- ] Key2 [,...]]] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-rows ] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-segments ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-\-unquoted ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RI [ VolumeGroupName | LogicalVolume { Name | Path } -.RI [ VolumeGroupName | LogicalVolume { Name | Path }\ ...]] - -.SH DESCRIPTION -lvs produces formatted output about logical volumes. -.SH OPTIONS -See -.BR lvm (8) -for common options. -.TP -.B \-\-aligned -Use with \fB\-\-separator\fP to align the output columns. -.TP -.B \-\-all -Include information in the output about internal Logical Volumes that -are components of normally-accessible Logical Volumes, such as mirrors, -but which are not independently accessible (e.g. not mountable). -The names of such Logical Volumes are enclosed within square brackets -in the output. For example, after creating a mirror using -.B lvcreate -m1 \-\-mirrorlog disk -, this option will reveal three internal Logical -Volumes, with suffixes mimage_0, mimage_1, and mlog. -.TP -.B \-\-binary -Use binary values "0" or "1" instead of descriptive literal values -for columns that have exactly two valid values to report (not counting -the "unknown" value which denotes that the value could not be determined). -.TP -.B \-\-configreport \fI ReportName -Make any subsequent \fB\-o, \-\-options\fP, \fB\-O, \-\-sort\fP or -\fB\-S, \-\-select\fP to apply for \fIReportName\fP where \fIReportName\fP -is either 'lv' for command's main report or 'log' for log report. -If \fB\-\-configreport\fP option is not used to identify a report, then -command's main report is assumed. The log report is available only if -enabled by \fBlog/report_command_log\fP \fBlvm.conf\fP(5) setting or -if \fB\-\-logonly\fP option is used. -.TP -.B \-H ", " \-\-history -Include historical logical volumes in the output. -(This has no effect unless logical volumes were removed while the configuration -setting \fBmetadata/record_lvs_history\fP was enabled.) -.TP -.B \-\-logonly -Suppress the lvs report itself and display only log report on output. -.TP -.B \-\-nameprefixes -Add an "LVM2_" prefix plus the field name to the output. Useful -with \fB\-\-noheadings\fP to produce a list of field=value pairs that can -be used to set environment variables (for example, in -.BR udev (7) -rules). -.TP -.B \-\-noheadings -Suppress the headings line that is normally the first line of output. -Useful if grepping the output. -.TP -.B \-\-nosuffix -Suppress the suffix on output sizes. Use with \fB\-\-units\fP -(except h and H) if processing the output. -.TP -.BR \-o ", " \-\-options -Comma-separated ordered list of columns. -.IP -Precede the list with '\fI+\fP' to append to the current list -of columns, '\fI-\fP' to remove from the current list of columns -or '\fI#\fP' to compact given columns. The \fI\-o\fP option can -be repeated, providing several lists. These lists are evaluated -from left to right. -.IP -Use \fB\-o lv_all\fP to select all logical volume columns, -and \fB\-o seg_all\fP -to select all logical volume segment columns. -.IP -Use \fB\-o help\fP to view the full list of columns available. -.IP -Column names include: -chunk_size, -convert_lv, -copy_percent, -data_lv, -devices, -discards, -lv_attr, -lv_host, -lv_kernel_major, -lv_kernel_minor, -lv_kernel_read_ahead, -lv_major, -lv_minor, -lv_name, -lv_path, -lv_profile, -lv_read_ahead, -lv_size, -lv_tags, -lv_time, -lv_uuid, -metadata_lv, -mirror_log, -modules, -move_pv, -origin, -origin_size, -pool_lv, -raid_max_recovery_rate, -raid_min_recovery_rate, -raid_mismatch_count, -raid_sync_action, -raid_write_behind, -region_size, -segtype, -seg_count, -seg_pe_ranges, -seg_size, -seg_size_pe, -seg_start, -seg_start_pe, -seg_tags, -snap_percent, -stripes, -stripe_size, -sync_percent, -thin_count, -transaction_id, -zero. -.IP -With \fB\-\-segments\fP, any "seg_" prefixes are optional; -otherwise any "lv_" prefixes are optional. Columns mentioned in -.BR vgs (8) -can also be chosen. -.IP -The lv_attr bits are: -.RS -.IP 1 3 -Volume type: (C)ache, (m)irrored, (M)irrored without initial sync, (o)rigin, -(O)rigin with merging snapshot, (r)aid, (R)aid without initial sync, -(s)napshot, merging (S)napshot, (p)vmove, (v)irtual, -mirror or raid (i)mage, mirror or raid (I)mage out-of-sync, mirror (l)og device, -under (c)onversion, thin (V)olume, (t)hin pool, (T)hin pool data, raid or -pool m(e)tadata or pool metadata spare. -.IP 2 3 -Permissions: (w)riteable, (r)ead-only, (R)ead-only activation of non-read-only -volume -.IP 3 3 -Allocation policy: (a)nywhere, (c)ontiguous, (i)nherited, c(l)ing, (n)ormal -This is capitalised if the volume is currently locked against allocation -changes, for example during -.BR pvmove (8). -.IP 4 3 -fixed (m)inor -.IP 5 3 -State: (a)ctive, (h)istorical, (s)uspended, (I)nvalid snapshot, -invalid (S)uspended snapshot, snapshot (m)erge failed, -suspended snapshot (M)erge failed, mapped (d)evice present without tables, -mapped device present with (i)nactive table, thin-pool (c)heck needed, -suspended thin-pool (C)heck needed, (X) unknown -.IP 6 3 -device (o)pen, (X) unknown -.IP 7 3 -Target type: (C)ache, (m)irror, (r)aid, (s)napshot, (t)hin, (u)nknown, (v)irtual. -This groups logical volumes related to the same kernel target together. So, -for example, mirror images, mirror logs as well as mirrors themselves appear as -(m) if they use the original device-mapper mirror kernel driver; whereas the raid -equivalents using the md raid kernel driver all appear as (r). -Snapshots using the original device-mapper driver appear as (s); whereas -snapshots of thin volumes using the new thin provisioning driver appear as (t). -.IP 8 3 -Newly-allocated data blocks are overwritten with blocks of (z)eroes before use. -.IP 9 3 -Volume Health, where there are currently three groups of attributes identified: -.IP -Common ones for all Logical Volumes: (p)artial, (X) unknown. -.br -(p)artial signifies that one or more of the Physical Volumes this Logical -Volume uses is missing from the system. (X) unknown signifies the status -is unknown. -.IP -Related to RAID Logical Volumes: (r)efresh needed, (m)ismatches exist, (w)ritemostly. -.br -(r)efresh signifies that one or more of the Physical Volumes this RAID Logical -Volume uses had suffered a write error. The write error could be due to a -temporary failure of that Physical Volume or an indication that it is failing. -The device should be refreshed or replaced. (m)ismatches signifies that the -RAID logical volume has portions of the array that are not coherent. -Inconsistencies are detected by initiating a "check" on a RAID logical volume. -(The scrubbing operations, "check" and "repair", can be performed on a RAID -logical volume via the 'lvchange' command.) (w)ritemostly signifies the -devices in a RAID 1 logical volume that have been marked write-mostly. -.IP -Related to Thin pool Logical Volumes: (F)ailed, out of (D)ata space, -(M)etadata read only. -.br -(F)ailed is set if thin pool encounters serious failures and hence no further I/O -is permitted at all. The out of (D)ata space is set if thin pool has run out of -data space. (M)etadata read only signifies that thin pool encounters certain -types of failures but it's still possible to do reads at least, -but no metadata changes are allowed. -.IP -Related to Thin Logical Volumes: (F)ailed. -.br -(F)ailed is set when related thin pool enters Failed state and no further I/O -is permitted at all. -.IP 10 3 -s(k)ip activation: this volume is flagged to be skipped during activation. -.RE -.TP -.BR \-O ", " \-\-sort -Comma-separated ordered list of columns to sort by. Replaces the default -selection. Precede any column with '\fI\-\fP' for a reverse sort on that column. -.TP -.B \-\-rows -Output columns as rows. -.TP -.BR \-S ", " \-\-select " " \fISelection -Display only rows that match Selection criteria. All rows are displayed with -the additional "selected" column (\fB-o selected\fP) showing 1 if the row -matches the Selection and 0 otherwise. The Selection criteria are defined -by specifying column names and their valid values (that can include reserved -values) while making use of supported comparison operators. See \fBlvm\fP(8) -and \fB\-S\fP, \fB\-\-select\fP description for more detailed information -about constructing the Selection criteria. As a quick help and to see full -list of column names that can be used in Selection including the list of -reserved values and the set of supported selection operators, check the -output of \fBlvs -S help\fP command. -.TP -.B \-\-segments -Use default columns that emphasize segment information. -.TP -.B \-\-separator \fISeparator -String to use to separate each column. Useful if grepping the output. -.TP -.B \-\-unbuffered -Produce output immediately without sorting or aligning the columns properly. -.TP -.B \-\-units \fIhHbBsSkKmMgGtTpPeE -All sizes are output in these units: (h)uman-readable, (b)ytes, (s)ectors, -(k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (p)etabytes, (e)xabytes. -Capitalise to use multiples of 1000 (S.I.) instead of 1024. Can also specify -custom units e.g. \fB\-\-units 3M\fP -.TP -.B \-\-unquoted -When used with \fB\-\-nameprefixes\fP, output values in the field=value -pairs are not quoted. -.SH SEE ALSO -.BR lvm (8), -.BR lvdisplay (8), -.BR pvs (8), -.BR vgs (8) diff --git a/man/lvscan.8.des b/man/lvscan.8.des new file mode 100644 index 000000000..e30eb58de --- /dev/null +++ b/man/lvscan.8.des @@ -0,0 +1,5 @@ +lvscan scans all VGs or all supported LVM block devices in the system for +LVs. The output consists of one line for each LV indicating whether or not +it is active, a snapshot or origin, the size of the device and its +allocation policy. Use \fBlvs\fP(8) or \fBlvdisplay\fP(8) to obtain more +comprehensive information about LVs. diff --git a/man/lvscan.8.in b/man/lvscan.8.in deleted file mode 100644 index 5710e3cb6..000000000 --- a/man/lvscan.8.in +++ /dev/null @@ -1,52 +0,0 @@ -.TH LVSCAN 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -lvscan \(em scan (all disks) for Logical Volumes -.SH SYNOPSIS -.B lvscan -.RB [ \-a | \-\-all] -.RB [ \-b | \-\-blockdevice ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-v | \-\-verbose ] -.SH DESCRIPTION -lvscan scans all known volume groups or all supported LVM block devices -in the system for defined Logical Volumes. The output consists -of one line for each Logical Volume indicating whether or not it is active, -a snapshot or origin, the size of the device and its allocation policy. -Use \fBlvs\fP(8) or \fBlvdisplay\fP(8) to obtain more-comprehensive -information about the Logical Volumes. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-\-all -Include information in the output about internal Logical Volumes that -are components of normally-accessible Logical Volumes, such as mirrors, -but which are not independently accessible (e.g. not mountable). -For example, after creating a mirror using -.B lvcreate \-m1 \-\-mirrorlog disk\fR, -this option will reveal three internal Logical Volumes, with suffixes -mimage_0, mimage_1, and mlog. -.TP -.BR \-b ", " \-\-blockdevice -This option is now ignored. Instead, use \fBlvs\fP(8) or -\fBlvdisplay\fP(8) to obtain the device number. -.TP -.IR \fB\-\-cache " " LogicalVolume -Applicable only when \fBlvmetad\fP(8) is in use (see also \fBlvm.conf\fP(5), -global/use_lvmetad). This command issues a rescan of physical volume labels and -metadata areas of all PVs that the logical volume uses. In particular, this can -be used when a RAID logical volume becomes degraded, to update information -about physical volume availability. This is only necessary if the logical -volume is \fBnot\fP being monitored by dmeventd (see \fBlvchange\fP(8), option -\fB\-\-monitor\fP). -.SH SEE ALSO -.BR lvm (8), -.BR lvcreate (8), -.BR lvdisplay (8) -.BR lvs (8) diff --git a/man/pvchange.8.des b/man/pvchange.8.des new file mode 100644 index 000000000..802850fa1 --- /dev/null +++ b/man/pvchange.8.des @@ -0,0 +1 @@ +pvchange changes PV attributes in the VG. diff --git a/man/pvchange.8.end b/man/pvchange.8.end new file mode 100644 index 000000000..a524d071d --- /dev/null +++ b/man/pvchange.8.end @@ -0,0 +1,6 @@ +.SH EXAMPLES + +Disallow the allocation of physical extents on a PV (e.g. because of +disk errors, or because it will be removed after freeing it). +.br +.B pvchange \-x n /dev/sdk1 diff --git a/man/pvchange.8.in b/man/pvchange.8.in deleted file mode 100644 index c7ddc5839..000000000 --- a/man/pvchange.8.in +++ /dev/null @@ -1,59 +0,0 @@ -.TH PVCHANGE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvchange \(em change attributes of a physical volume -.SH SYNOPSIS -.B pvchange -.RB [ \-\-addtag -.IR Tag ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-f | \-\-force ] -.RB [ \-\-deltag -.IR Tag ] -.RB [ \-\-metadataignore -.RI { y | n }] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-a | \-\-all ] -.RB [ \-x | \-\-allocatable -.RI { y | n }] -.RB [ \-u | \-\-uuid ] -.RI [ PhysicalVolumePath ...] -.SH DESCRIPTION -pvchange allows you to change the allocation permissions of one or -more physical volumes. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-a ", " \-\-all -If PhysicalVolumePath is not specified on the command line all -physical volumes are searched for and used. -.TP -.BR \-\-metadataignore " {" \fIy | \fIn } -Ignore or un-ignore metadata areas on this physical volume. -If metadata areas on a physical volume are ignored, LVM will -not not store metadata in the metadata areas present on this Physical -Volume. -.TP -.BR \-u ", " \-\-uuid -Generate new random UUID for specified physical volumes. -.TP -.BR \-x ", " \-\-allocatable " {" \fIy | \fIn } -Enable or disable allocation of physical extents on this physical volume. -.SH Example -Disallows the allocation of physical extents on this physical volume -(possibly because of disk errors, or because it will be removed after -freeing it: -.sp -.B pvchange \-x n /dev/sdk1 -.SH SEE ALSO -.BR lvm (8), -.BR pvcreate (8) diff --git a/man/pvck.8.des b/man/pvck.8.des new file mode 100644 index 000000000..0a3265789 --- /dev/null +++ b/man/pvck.8.des @@ -0,0 +1 @@ +pvck checks the LVM metadata for consistency on PVs. diff --git a/man/pvck.8.end b/man/pvck.8.end new file mode 100644 index 000000000..67af2389a --- /dev/null +++ b/man/pvck.8.end @@ -0,0 +1,8 @@ +.SH EXAMPLES + +If the partition table is corrupted or lost on /dev/sda, and you suspect +there was an LVM partition at approximately 100 MiB, then this +area of the disk can be scanned using the \fB\-\-labelsector\fP +parameter with a value of 204800 (100 * 1024 * 1024 / 512 = 204800). +.br +.B pvck \-\-labelsector 204800 /dev/sda diff --git a/man/pvck.8.in b/man/pvck.8.in deleted file mode 100644 index 368dc0601..000000000 --- a/man/pvck.8.in +++ /dev/null @@ -1,37 +0,0 @@ -.TH PVCK 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvck \(em check physical volume metadata -.SH SYNOPSIS -.B pvck -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-labelsector -.IR sector ] -.I PhysicalVolume -.RI [ PhysicalVolume ...] -.SH DESCRIPTION -pvck checks physical volume LVM metadata for consistency. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.B \-\-labelsector \fIsector -By default, 4 sectors of \fBPhysicalVolume\fP are scanned for an LVM label, -starting at sector 0. This parameter allows you to specify a different -starting sector for the scan and is useful for recovery situations. For -example, suppose the partition table is corrupted or lost on /dev/sda, -but you suspect there was an LVM partition at approximately 100 MiB. This -area of the disk may be scanned by using the \fB\-\-labelsector\fP parameter -with a value of 204800 (100 * 1024 * 1024 / 512 = 204800): -.sp -.B pvck \-\-labelsector 204800 /dev/sda -.sp -Note that a script can be used with \fB\-\-labelsector\fP to automate the -process of finding LVM labels. -.SH SEE ALSO -.BR lvm (8), -.BR pvcreate (8), -.BR pvscan (8) -.BR vgck (8) diff --git a/man/pvcreate.8.des b/man/pvcreate.8.des new file mode 100644 index 000000000..3dfddbcb7 --- /dev/null +++ b/man/pvcreate.8.des @@ -0,0 +1,18 @@ +pvcreate initializes a PV so that it is recognized as belonging to LVM, +and allows the PV to be used in a VG. A PV can be a disk partition, whole +disk, meta device, or loopback file. + +For DOS disk partitions, the partition id should be set to 0x8e using +.BR fdisk (8), +.BR cfdisk (8), +or a equivalent. For GUID Partition Table (GPT), the id is +E6D6D379-F507-44C2-A23C-238F2A3DF928. For +whole disk devices only +the partition table must be erased, which will effectively destroy all +data on that disk. This can be done by zeroing the first sector with: + +.BI "dd if=/dev/zero of=" PhysicalVolume " bs=512 count=1" + +Use \fBvgcreate\fP(8) to create a new VG on the PV, or \fBvgextend\fP(8) +to add the PV to existing VG. + diff --git a/man/pvcreate.8.end b/man/pvcreate.8.end new file mode 100644 index 000000000..b1b0f3e53 --- /dev/null +++ b/man/pvcreate.8.end @@ -0,0 +1,13 @@ +.SH EXAMPLES + +Initialize a partition and a full device. +.br +.B pvcreate /dev/sdc4 /dev/sde + +If a device is a 4KiB sector drive that compensates for windows +partitioning (sector 7 is the lowest aligned logical block, the 4KiB +sectors start at LBA -1, and consequently sector 63 is aligned on a 4KiB +boundary) manually account for this when initializing for use by LVM. +.br +.B pvcreate \-\-dataalignmentoffset 7s /dev/sdb + diff --git a/man/pvcreate.8.in b/man/pvcreate.8.in deleted file mode 100644 index 97a9909a4..000000000 --- a/man/pvcreate.8.in +++ /dev/null @@ -1,210 +0,0 @@ -.TH PVCREATE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvcreate \(em initialize a disk or partition for use by LVM -.SH SYNOPSIS -.B pvcreate -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-f [ f ]| \-\-force -.RB [ \-\-force ]] -.RB [ \-y | \-\-yes ] -.RB [ \-\-labelsector ] -.RB [ \-\-bootloaderareasize -.IR size ] -.RB [ \-M | \-\-metadatatype -.IR type ] -.RB [ \-\- [ pv ] metadatacopies -.IR NumberOfCopies ] -.RB [ \-\-metadatasize -.IR size ] -.RB [ \-\-metadataignore -.RI { y | n }] -.RB [ \-\-dataalignment -.IR alignment ] -.RB [ \-\-dataalignmentoffset -.IR alignment_offset ] -.RB [ \-\-restorefile -.IR file ] -.RB [ \-\-norestorefile ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-setphysicalvolumesize -.IR size ] -.RB [ \-u | \-\-uuid -.IR uuid ] -.RB [ \-Z | \-\-zero -.RI { y | n }] -.I PhysicalVolume -.RI [ PhysicalVolume ...] -.SH DESCRIPTION -pvcreate initializes -.I PhysicalVolume -for later use by the Logical Volume Manager (LVM). Each -.I PhysicalVolume -can be a disk partition, whole disk, meta device, or loopback file. -For DOS disk partitions, the partition id should be set to 0x8e using -.BR fdisk (8), -.BR cfdisk (8), -or a equivalent. For GUID Partition Table (GPT), the id is -E6D6D379-F507-44C2-A23C-238F2A3DF928. For -.B whole disk devices only -the partition table must be erased, which will effectively destroy all -data on that disk. This can be done by zeroing the first sector with: -.sp -.BI "dd if=/dev/zero of=" PhysicalVolume " bs=512 count=1" -.sp -Continue with -.BR vgcreate (8) -to create a new volume group on -.IR PhysicalVolume , -or -.BR vgextend (8) -to add -.I PhysicalVolume -to an existing volume group. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-f ", " \-\-force -Force the creation without any confirmation. You can not recreate -(reinitialize) a physical volume belonging to an existing volume group. -In an emergency you can override this behaviour with \fB-ff\fP. -.TP -.BR \-u ", " \-\-uuid " " \fIuuid -Specify the uuid for the device. -Without this option, \fBpvcreate\fP(8) generates a random uuid. -All of your physical volumes must have unique uuids. -You need to use this option before restoring a backup of LVM metadata -onto a replacement device - see \fBvgcfgrestore\fP(8). As such, use of -\fB\-\-restorefile\fP is compulsory unless the \fB\-\-norestorefile\fP is -used. -.TP -.BR \-y ", " \-\-yes -Answer yes to all questions. -.TP -.BR \-Z ", " \-\-zero " {" \fIy | \fIn } -Whether or not the first 4 sectors (2048 bytes) of the device should be -wiped. -If this option is not given, the -default is to wipe these sectors unless either or both of the -\fB\-\-restorefile\fP or \fB\-\-uuid\fP options were specified. -.SH NEW METADATA OPTIONS -LVM2 introduces a new format for storing metadata on disk. -This new format is more efficient and resilient than the format the -original version of LVM used and offers the advanced user greater -flexibility and control. -.P -The new format may be selected on the command line with \fB\-M2\fP or by -setting \fBformat = "lvm2"\fP in the \fBglobal\fP section of \fBlvm.conf\fP(5). -Each physical volume in the same volume group must use the same format, but -different volume groups on a machine may use different formats -simultaneously: the tools can handle both formats. -Additional formats can be added as shared libraries. -.P -Additional tools for manipulating the locations and sizes of metadata areas -will be written in due course. Use the verbose/debug options on the tools -to see where the metadata areas are placed. -.TP -.B \-\-metadatasize \fIsize -The approximate amount of space to be set aside for each metadata area. -(The size you specify may get rounded.) -.TP -.B \-\-dataalignment \fIalignment -Align the start of the data to a multiple of this number. -You should also specify an appropriate \fIPhysicalExtentSize\fP when creating -the Volume Group with \fBvgcreate\fP. -.sp -To see the location of the first Physical Extent of an existing Physical Volume -use \fBpvs \-o +pe_start\fP . It will be a multiple of the requested -alignment. In addition it may be shifted by \fIalignment_offset\fP from -\fIdata_alignment_offset_detection\fP (if enabled in \fBlvm.conf\fP(5)) or -\fB\-\-dataalignmentoffset\fP. -.TP -.B \-\-dataalignmentoffset \fIalignment_offset -Shift the start of the data area by this additional \fIalignment_offset\fP. -.TP -.BR \-\- [ pv ] metadatacopies " " \fINumberOfCopies -The number of metadata areas to set aside on each PV. Currently -this can be 0, 1 or 2. -If set to 2, two copies of the volume group metadata -are held on the PV, one at the front of the PV and one at the end. -If set to 1 (the default), one copy is kept at the front of the PV -(starting in the 5th sector). -If set to 0, no copies are kept on this PV - you might wish to use this -with VGs containing large numbers of PVs. But if you do this and -then later use \fBvgsplit\fP(8) you must ensure that each VG is still going -to have a suitable number of copies of the metadata after the split! -.TP -.BR \-\-metadataignore " {" \fIy | \fIn } -Ignore or un-ignore metadata areas on this physical volume. -The default is "n". This setting can be changed with \fBpvchange\fP. -If metadata areas on a physical volume are ignored, LVM will -not store metadata in the metadata areas present on this Physical -Volume. Metadata areas cannot be created or extended after Logical -Volumes have been allocated on the device. If you do not want to store -metadata on this device, it is still wise always to allocate a metadata -area in case you need it in the future and to use this option to instruct -LVM2 to ignore it. -.TP -.B \-\-restorefile \fIfile -In conjunction with \fB\-\-uuid\fP, this extracts the location and size -of the data on the PV from the file (produced by \fBvgcfgbackup\fP) -and ensures that the metadata that the program produces is consistent -with the contents of the file i.e. the physical extents will be in -the same place and not get overwritten by new metadata. This provides -a mechanism to upgrade the metadata format or to add/remove metadata -areas. Use with care. See also \fBvgconvert\fP(8). -.TP -.B \-\-norestorefile -In conjunction with \fB\-\-uuid\fP, this allows a \fIuuid\fP to be specified -without also requiring that a backup of the metadata be provided. -.TP -.B \-\-labelsector \fIsector -By default the PV is labelled with an LVM2 identifier in its second -sector (sector 1). This lets you use a different sector near the -start of the disk (between 0 and 3 inclusive - see LABEL_SCAN_SECTORS -in the source). Use with care. -.TP -.B \-\-bootloaderareasize \fIsize -Create a separate bootloader area of specified size besides PV's data -area. The bootloader area is an area of reserved space on the PV from -which LVM2 will not allocate any extents and it's kept untouched. This is -primarily aimed for use with bootloaders to embed their own data or metadata. -The start of the bootloader area is always aligned, see also \fB\-\-dataalignment\fP -and \fB\-\-dataalignmentoffset\fP. The bootloader area size may eventually -end up increased due to the alignment, but it's never less than the -size that is requested. To see the bootloader area start and size of -an existing Physical Volume use \fBpvs \-o +pv_ba_start,pv_ba_size\fP. -.TP -.B \-\-setphysicalvolumesize \fIsize -Overrides the automatically-detected size of the PV. Use with care. -.SH Examples -Initialize partition #4 on the third SCSI disk and the entire fifth -SCSI disk for later use by LVM: -.sp -.B pvcreate /dev/sdc4 /dev/sde - -If the 2nd SCSI disk is a 4KiB sector drive that compensates for windows -partitioning (sector 7 is the lowest aligned logical block, the 4KiB -sectors start at LBA -1, and consequently sector 63 is aligned on a 4KiB -boundary) manually account for this when initializing for use by LVM: -.sp -.B pvcreate \-\-dataalignmentoffset 7s /dev/sdb - -.SH SEE ALSO -.BR lvm.conf (5), -.BR lvm (8), -.BR vgcreate (8), -.BR vgextend (8), -.BR lvcreate (8), -.BR cfdisk (8), -.BR fdisk (8), -.BR losetup (8), -.BR mdadm (8), -.BR vgcfgrestore (8), -.BR vgconvert (8) diff --git a/man/pvdisplay.8.des b/man/pvdisplay.8.des new file mode 100644 index 000000000..74d57ca78 --- /dev/null +++ b/man/pvdisplay.8.des @@ -0,0 +1,5 @@ +pvdisplay shows the attributes of PVs, like size, physical extent size, +space used for the VG descriptor area, etc. + +\fBpvs\fP(8) is a preferred alternative that shows the same information +and more, using a more compact and configurable output format. diff --git a/man/pvdisplay.8.in b/man/pvdisplay.8.in deleted file mode 100644 index 9bca72049..000000000 --- a/man/pvdisplay.8.in +++ /dev/null @@ -1,109 +0,0 @@ -.TH PVDISPLAY 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvdisplay \- display attributes of a physical volume -.SH SYNOPSIS -.B pvdisplay -.RB [ \-c | \-\-colon ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-maps ] -.RB [ \-\-nosuffix ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-s | \-\-short ] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-\-units -.IR hsbkmgtHKMGT ] -.RB [ \-v [ v ]| \-\-verbose -.RB [ \-\-verbose ]] -.RB [ \-\-version ] -.RI [ PhysicalVolumePath ...] -.br - -.br -.B pvdisplay -.BR \-C | \-\-columns -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-a | \-\-all ] -.RB [ \-\-commandprofile -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-logonly ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-v [ v ]| \-\-verbose -.RB [ \-\-verbose ]] -.RB [ \-\-version ] -.RI [ PhysicalVolumePath ...] -.SH DESCRIPTION -pvdisplay allows you to see the attributes of one or more physical volumes -like size, physical extent size, space used for the volume group descriptor -area and so on. -.P -\fBpvs\fP(8) is an alternative that provides the same information -in the style of \fBps\fP(1). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-C ", " \-\-columns -Display output in columns, the equivalent of \fBpvs\fP(8). See -\fBpvs\fP(8) for a description of other options with this form of -\fBpvdisplay\fP. -.TP -.BR \-c ", " \-\-colon -Generate colon separated output for easier parsing in scripts or programs. -N.B. \fBpvs\fP(8) provides considerably more control over the output. -.nf - -The values are: - -\(bu physical volume device name -\(bu volume group name -\(bu physical volume size in sectors -\(bu internal physical volume number (obsolete) -\(bu physical volume status -\(bu physical volume (not) allocatable -\(bu current number of logical volumes on this physical volume -\(bu physical extent size in kilobytes -\(bu total number of physical extents -\(bu free number of physical extents -\(bu allocated number of physical extents - -.fi -.TP -.BR \-s ", " \-\-short -Only display the size of the given physical volumes. -.TP -.BR \-m ", " \-\-maps -Display the mapping of physical extents to logical volumes and -logical extents. -.SH SEE ALSO -.BR lvm (8), -.BR pvs (8), -.BR pvcreate (8), -.BR lvcreate (8), -.BR vgcreate (8) diff --git a/man/pvmove.8.des b/man/pvmove.8.des new file mode 100644 index 000000000..5286ef403 --- /dev/null +++ b/man/pvmove.8.des @@ -0,0 +1,61 @@ +pvmove moves the allocated physical extents (PEs) on a source PV to one or +more destination PVs. You can optionally specify a source LV in which +case only extents used by that LV will be moved to free (or specified) +extents on the destination PV. If no destination PV is specified, the +normal allocation rules for the VG are used. + +If pvmove is interrupted for any reason (e.g. the machine crashes) then +run pvmove again without any PV arguments to restart any operations that +were in progress from the last checkpoint. Alternatively, use the abort +option at any time to abort the operation. The resulting location of LVs +after an abort depends on whether the atomic option was used. + +More than one pvmove can run concurrently if they are moving data from +different source PVs, but additional pvmoves will ignore any LVs already +in the process of being changed, so some data might not get moved. + +pvmove works as follows: + +1. A temporary 'pvmove' LV is created to store details of all the data +movements required. + +2. Every LV in the VG is searched for contiguous data that need moving +according to the command line arguments. +For each piece of data found, a new segment is added to the end of the +pvmove LV. +This segment takes the form of a temporary mirror to copy the data +from the original location to a newly allocated location. +The original LV is updated to use the new temporary mirror segment +in the pvmove LV instead of accessing the data directly. + +3. The VG metadata is updated on disk. + +4. The first segment of the pvmove LV is activated and starts to mirror +the first part of the data. Only one segment is mirrored at once as this +is usually more efficient. + +5. A daemon repeatedly checks progress at the specified time interval. +When it detects that the first temporary mirror is in sync, it breaks that +mirror so that only the new location for that data gets used and writes a +checkpoint into the VG metadata on disk. Then it activates the mirror for +the next segment of the pvmove LV. + +6. When there are no more segments left to be mirrored, the temporary LV +is removed and the VG metadata is updated so that the LVs reflect the new +data locations. + +Note that this new process cannot support the original LVM1 +type of on-disk metadata. Metadata can be converted using +\fBvgconvert\fP(8). + +If the \fB\-\-atomic\fP option is used, a slightly different approach is +used for the move. Again, a temporary 'pvmove' LV is created to store the +details of all the data movements required. This temporary LV contains +all the segments of the various LVs that need to be moved. However, in +this case, an identical LV is allocated that contains the same number of +segments and a mirror is created to copy the contents from the first +temporary LV to the second. After a complete copy is made, the temporary +LVs are removed, leaving behind the segments on the destination PV. If an +abort is issued during the move, all LVs being moved will remain on the +source PV. + diff --git a/man/pvmove.8.end b/man/pvmove.8.end new file mode 100644 index 000000000..9dd3adcc8 --- /dev/null +++ b/man/pvmove.8.end @@ -0,0 +1,46 @@ +.SH EXAMPLES + +Move all physical extents that are used by simple LVs on the specified PV to +free physical extents elsewhere in the VG. +.br +.B pvmove /dev/sdb1 + +Use a specific destination PV when moving physical extents. +.br +.B pvmove /dev/sdb1 /dev/sdc1 + +Move extents belonging to a single LV. +.br +.B pvmove \-n lvol1 /dev/sdb1 /dev/sdc1 + +Rather than moving the contents of an entire device, it is possible to +move a range of physical extents, for example numbers 1000 to 1999 +inclusive on the specified PV. +.br +.B pvmove /dev/sdb1:1000\-1999 + +A range of physical extents to move can be specified as start+length. For +example, starting from PE 1000. (Counting starts from 0, so this refers to the +1001st to the 2000th PE inclusive.) +.br +.B pvmove /dev/sdb1:1000+1000 + +Move a range of physical extents to a specific PV (which must have +sufficient free extents). +.br +.B pvmove /dev/sdb1:1000\-1999 /dev/sdc1 + +Move a range of physical extents to specific new extents on a new PV. +.br +.B pvmove /dev/sdb1:1000\-1999 /dev/sdc1:0\-999 + +If the source and destination are on the same disk, the +\fBanywhere\fP allocation policy is needed. +.br +.B pvmove \-\-alloc anywhere /dev/sdb1:1000\-1999 /dev/sdb1:0\-999 + +The part of a specific LV present within in a range of physical +extents can also be picked out and moved. +.br +.B pvmove \-n lvol1 /dev/sdb1:1000\-1999 /dev/sdc1 + diff --git a/man/pvmove.8.in b/man/pvmove.8.in deleted file mode 100644 index 39fdfe40a..000000000 --- a/man/pvmove.8.in +++ /dev/null @@ -1,187 +0,0 @@ -.TH PVMOVE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvmove \(em move physical extents -.SH SYNOPSIS -.B pvmove -.RB [ \-\-abort ] -.RB [ \-\-alloc -.IR AllocationPolicy ] -.RB [ \-\-atomic ] -.RB [ \-b | \-\-background ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-i | \-\-interval -.IR Seconds ] -.RB [ \-\-noudevsync ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-v | \-\-verbose ] -.RB [ \-n | \-\-name -.IR LogicalVolume ] -.RI [ SourcePhysicalVolume [ :PE [ \-PE ]...] -.RI [ DestinationPhysicalVolume [ :PE [ \-PE ]...]...]] -.SH DESCRIPTION -pvmove allows you to move the allocated physical extents (PEs) on -.I SourcePhysicalVolume -to one or more other physical volumes (PVs). -You can optionally specify a source -.I LogicalVolume -in which case only extents used by that LV will be moved to -free (or specified) extents on -.IR DestinationPhysicalVolume (s). -If no -.I DestinationPhysicalVolume -is specified, the normal allocation rules for the Volume Group are used. - -If pvmove gets interrupted for any reason (e.g. the machine crashes) -then run pvmove again without any PhysicalVolume arguments to -restart any moves that were in progress from the last checkpoint. -Alternatively use \fBpvmove \-\-abort\fP at any time to abort. The -resulting location of logical volumes after an abort is issued depends -on whether the -.B \-\-atomic -option was used when starting the pvmove process. - -You can run more than one pvmove at once provided they are moving data -off different SourcePhysicalVolumes, but additional pvmoves will ignore -any Logical Volumes already in the process of being changed, so some -data might not get moved. - -\fBpvmove\fP works as follows: - -1. A temporary 'pvmove' Logical Volume is created to store -details of all the data movements required. - -2. Every Logical Volume in the Volume Group is searched -for contiguous data that need moving -according to the command line arguments. -For each piece of data found, a new segment is added to the end of the -pvmove LV. -This segment takes the form of a temporary mirror to copy the data -from the original location to a newly-allocated location. -The original LV is updated to use the new temporary mirror segment -in the pvmove LV instead of accessing the data directly. - -3. The Volume Group metadata is updated on disk. - -4. The first segment of the pvmove Logical Volume is activated and starts -to mirror the first part of the data. Only one segment is mirrored at once -as this is usually more efficient. - -5. A daemon repeatedly checks progress at the specified time interval. -When it detects that the first temporary mirror is in-sync, -it breaks that mirror so that only the new location for that data gets used -and writes a checkpoint into the Volume Group metadata on disk. -Then it activates the mirror for the next segment of the pvmove LV. - -6. When there are no more segments left to be mirrored, -the temporary Logical Volume is removed and the Volume Group metadata -is updated so that the Logical Volumes reflect the new data locations. - -Note that this new process cannot support the original LVM1 -type of on-disk metadata. Metadata can be converted using \fBvgconvert\fP(8). - -If the -.B \-\-atomic -option is used, a slightly different approach is used for the move. Again, -a temporary 'pvmove' logical volume is created to store the details of all -the data movements required. This temporary LV contains all the segments of -the various LVs that need to be moved. However this time, an identical -logical volume is allocated that contains the same number of segments and -a mirror is created to copy the contents from the first temporary LV to the -second. When a complete copy is accomplished, the temporary logical volumes -are removed, leaving behind the segments on the destination physical volume. -If an abort is issued during the move, all logical volumes being moved will -remain on the source physical volume. - -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.B \-\-abort -Abort any moves in progress. If the -.B \-\-atomic -option was used to start the pvmove, all logical volumes will remain on -the source physical volume. Otherwise, those segments that have completed -the move will stay on the destination physical volume, while those that -have not will remain on the source physical volume. -.TP -.B \-\-atomic -Make the entire operation atomic. That is, ensure that all affected logical -volumes are moved to the destination physical volume together; unless the move -has been aborted. If the move has been aborted, all logical volumes will -remain on the source physical volume. -.TP -.B \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.TP -.BR \-b ", " \-\-background -Run the daemon in the background. -.TP -.BR \-i ", " \-\-interval " " \fISeconds -Report progress as a percentage at regular intervals. -.TP -.BR \-n ", " \-\-name " " \fILogicalVolume -Move only the extents belonging to -.I LogicalVolume -from -.I SourcePhysicalVolume -instead of all allocated extents to the destination physical volume(s). - -.SH Examples -To move all Physical Extents that are used by simple Logical Volumes on -/dev/sdb1 to free Physical Extents elsewhere in the Volume Group use: -.sp -.B pvmove /dev/sdb1 -.P -Additionally, a specific destination device /dev/sdc1 -can be specified like this: -.sp -.B pvmove /dev/sdb1 /dev/sdc1 -.P -To perform the action only on extents belonging to the single Logical Volume -lvol1 do this: -.sp -.B pvmove \-n lvol1 /dev/sdb1 /dev/sdc1 -.P -Rather than moving the contents of the entire device, it is possible to -move a range of Physical Extents - for example numbers 1000 to 1999 -inclusive on /dev/sdb1 - like this: -.sp -.B pvmove /dev/sdb1:1000\-1999 -.P -A range can also be specified as start+length, so -.sp -.B pvmove /dev/sdb1:1000+1000 -.P -also refers to 1000 Physical Extents starting from Physical Extent number 1000. -(Counting starts from 0, so this refers to the 1001st to the 2000th inclusive.) -.P -To move a range of Physical Extents to a specific location (which must have -sufficient free extents) use the form: -.sp -.B pvmove /dev/sdb1:1000\-1999 /dev/sdc1 -.sp -or -.sp -.B pvmove /dev/sdb1:1000\-1999 /dev/sdc1:0\-999 -.P -If the source and destination are on the same disk, the -.B anywhere -allocation policy would be needed, like this: -.sp -.B pvmove \-\-alloc anywhere /dev/sdb1:1000\-1999 /dev/sdb1:0\-999 -.P -The part of a specific Logical Volume present within in a range of Physical -Extents can also be picked out and moved, like this: -.sp -.B pvmove \-n lvol1 /dev/sdb1:1000\-1999 /dev/sdc1 -.SH SEE ALSO -.BR lvm (8), -.BR vgconvert (8) -.BR pvs (8) diff --git a/man/pvremove.8.des b/man/pvremove.8.des new file mode 100644 index 000000000..f12b76e63 --- /dev/null +++ b/man/pvremove.8.des @@ -0,0 +1,2 @@ +pvremove wipes the label on a device so that LVM will no longer recognise +it as a PV. diff --git a/man/pvremove.8.in b/man/pvremove.8.in deleted file mode 100644 index 6444884c7..000000000 --- a/man/pvremove.8.in +++ /dev/null @@ -1,37 +0,0 @@ -.TH PVREMOVE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvremove \(em remove a physical volume -.SH SYNOPSIS -.B pvremove -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-f [ f ]| \-\-force -.RB [ \-\-force ]] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-y | \-\-yes ] -.I PhysicalVolume -.RI [ PhysicalVolume ...] -.SH DESCRIPTION -pvremove wipes the label on a device so that LVM will no longer -recognise it as a physical volume. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-ff ", " \-\-force " " \-\-force -Force the removal of a physical volume belonging to an existing volume group. -Normally \fBvgreduce\fP(8) should be used instead of this command. -You cannot remove a physical volume which in use by some active logical volume. -.TP -.BR \-y ", " \-\-yes -Answer yes to all questions. -.SH SEE ALSO -.BR lvm (8), -.BR pvcreate (8), -.BR pvdisplay (8), -.BR vgreduce (8) diff --git a/man/pvresize.8.des b/man/pvresize.8.des new file mode 100644 index 000000000..b3cfe631a --- /dev/null +++ b/man/pvresize.8.des @@ -0,0 +1,2 @@ +pvresize resizes a PV. The PV may already be in a VG and may have active +LVs allocated on it. diff --git a/man/pvresize.8.end b/man/pvresize.8.end new file mode 100644 index 000000000..316e408ad --- /dev/null +++ b/man/pvresize.8.end @@ -0,0 +1,16 @@ +.SH NOTES + +pvresize will refuse to shrink a PV if it has allocated extents beyond the +new end. + +.SH EXAMPLES + +Expand a PV after enlarging the partition. +.br +.B pvresize /dev/sda1 + +Shrink a PV prior to shrinking the partition (ensure that the PV size is +appropriate for the intended new partition size). +.br +.B pvresize \-\-setphysicalvolumesize 40G /dev/sda1 + diff --git a/man/pvresize.8.in b/man/pvresize.8.in deleted file mode 100644 index b7d8f33a5..000000000 --- a/man/pvresize.8.in +++ /dev/null @@ -1,56 +0,0 @@ -.TH PVRESIZE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvresize \(em resize a disk or partition in use by LVM2 -.SH SYNOPSIS -.B pvresize -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-setphysicalvolumesize -.IR size ] -.I PhysicalVolume -.RI [ PhysicalVolume ...] -.SH DESCRIPTION -pvresize resizes -.I PhysicalVolume -which may already be in a volume group and have active logical volumes -allocated on it. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BI \-\-setphysicalvolumesize " size" -Overrides the automatically-detected size of the PV. Use with care, or -prior to reducing the physical size of the device. -.SH EXAMPLES -Expand the PV on /dev/sda1 after enlarging the partition with fdisk: -.sp -.B pvresize /dev/sda1 -.sp -Shrink the PV on /dev/sda1 prior to shrinking the partition with fdisk -(ensure that the PV size is appropriate for your intended new partition -size): -.sp -.B pvresize \-\-setphysicalvolumesize 40G /dev/sda1 -.sp -.SH RESTRICTIONS -pvresize will refuse to shrink -.I PhysicalVolume -if it has allocated extents after where its new end would be. In the future, -it should relocate these elsewhere in the volume group if there is sufficient -free space, like -.B pvmove -does. -.sp -.B pvresize -won't currently work correctly on LVM1 volumes. -.SH SEE ALSO -.BR lvm (8), -.BR pvmove (8), -.BR lvresize (8), -.BR fdisk (8) diff --git a/man/pvs.8.des b/man/pvs.8.des new file mode 100644 index 000000000..08497cef2 --- /dev/null +++ b/man/pvs.8.des @@ -0,0 +1 @@ +pvs produces formatted output about PVs. diff --git a/man/pvs.8.end b/man/pvs.8.end new file mode 100644 index 000000000..ba36a8bc2 --- /dev/null +++ b/man/pvs.8.end @@ -0,0 +1,11 @@ +.SH NOTES +. +The pv_attr bits are: +.IP 1 3 +(d)uplicate, (a)llocatable, (u)sed +.IP 2 3 +e(x)ported +.IP 3 3 +(m)issing + + diff --git a/man/pvs.8.in b/man/pvs.8.in deleted file mode 100644 index 54f21c3fa..000000000 --- a/man/pvs.8.in +++ /dev/null @@ -1,153 +0,0 @@ -.TH PVS 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvs \(em report information about physical volumes -.SH SYNOPSIS -.B pvs -.RB [ \-a | \-\-all ] -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-logonly ] -.RB [ \-\-nameprefixes ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-rows ] -.RB [ \-\-segments ] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-\-unquoted ] -.RB [ \-v|\-\-verbose ] -.RB [ \-\-version] -.RI [ PhysicalVolume -.RI [ PhysicalVolume ...]] -.SH DESCRIPTION -pvs produces formatted output about physical volumes. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.B \-\-all -Include information in the output about devices that have not been -initialized with \fBpvcreate\fP(8). -.TP -.B \-\-aligned -Use with \fB\-\-separator\fP to align the output columns. -.TP -.B \-\-binary -Use binary values "0" or "1" instead of descriptive literal values -for columns that have exactly two valid values to report (not counting -the "unknown" value which denotes that the value could not be determined). -.TP -.B \-\-configreport \fI ReportName -Make any subsequent \fB\-o, \-\-options\fP, \fB\-O, \-\-sort\fP or -\fB\-S, \-\-select\fP to apply for \fIReportName\fP where \fIReportName\fP -is either 'pv' for command's main report or 'log' for log report. -If \fB\-\-configreport\fP option is not used to identify a report, then -command's main report is assumed. The log report is available only if -enabled by \fBlog/report_command_log\fP \fBlvm.conf\fP(5) setting or -if \fB\-\-logonly\fP option is used. -.TP -.B \-\-logonly -Suppress the pvs report itself and display only log report on output. -.TP -.B \-\-nameprefixes -Add an "LVM2_" prefix plus the field name to the output. Useful -with \fB\-\-noheadings\fP to produce a list of field=value pairs that can -be used to set environment variables (for example, in \fBudev\fP(7) rules). -.TP -.B \-\-noheadings -Suppress the headings line that is normally the first line of output. -Useful if grepping the output. -.TP -.B \-\-nosuffix -Suppress the suffix on output sizes. Use with \fB\-\-units\fP -(except h and H) if processing the output. -.TP -.BR \-o ", " \-\-options -Comma-separated ordered list of columns. -.IP -Precede the list with '\fI+\fP' to append to the current list -of columns, '\fI-\fP' to remove from the current list of columns -or '\fI#\fP' to compact given columns. The \fI\-o\fP option can -be repeated, providing several lists. These lists are evaluated -from left to right. -.IP -Use \fB-o pv_all\fP to select all physical volume columns, -and \fB-o pvseg_all\fP to select all Physical Volume segment columns. -.IP -Use \fB-o help\fP to view the full list of columns available. -.IP -Column names include: pv_fmt, pv_uuid, dev_size, pv_name, pv_mda_free, -pv_mda_size, pv_ba_start, pv_ba_size, pe_start, pv_size, pv_free, pv_used, -pv_attr, pv_pe_count, pv_pe_alloc_count, pv_tags, pv_mda_count, -pv_mda_used_count, pvseg_start, and pvseg_size -.IP -With \fB\-\-segments\fP, any "pvseg_" prefixes are optional; otherwise any -"pv_" prefixes are optional. Columns mentioned in \fBvgs\fP(8) can also -be chosen. The pv_attr bits are: (a)llocatable, e(x)ported, (m)issing, -(u)sed (but not allocatable), (d)uplicate. -.TP -.B \-\-segments -Produces one line of output for each contiguous allocation of space on each -Physical Volume, showing the start (pvseg_start) and length (pvseg_size) in -units of physical extents. -.TP -.BR \-S ", " \-\-select " " \fISelection -Display only rows that match Selection criteria. All rows are displayed with -the additional "selected" column (\fB-o selected\fP) showing 1 if the row -matches the Selection and 0 otherwise. The Selection criteria are defined -by specifying column names and their valid values (that can include reserved -values) while making use of supported comparison operators. See \fBlvm\fP(8) -and \fB\-S\fP, \fB\-\-select\fP description for more detailed information -about constructing the Selection criteria. As a quick help and to see full -list of column names that can be used in Selection including the list of -reserved values and the set of supported selection operators, check the -output of \fBpvs -S help\fP command. -.TP -.BR \-O ", " \-\-sort -Comma-separated ordered list of columns to sort by. Replaces the default -selection. Precede any column with '\fI\-\fP' for a reverse sort on that -column. -.TP -.B \-\-rows -Output columns as rows. -.TP -.B \-\-separator \fISeparator -String to use to separate each column. Useful if grepping the output. -.TP -.B \-\-unbuffered -Produce output immediately without sorting or aligning the columns properly. -.TP -.B \-\-units \fIhHbBsSkKmMgGtTpPeE -All sizes are output in these units: (h)uman-readable, (b)ytes, (s)ectors, -(k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (p)etabytes, (e)xabytes. -Capitalise to use multiples of 1000 (S.I.) instead of 1024. Can also specify -custom units e.g. \-\-units 3M -.TP -.B \-\-unquoted -When used with \fB\-\-nameprefixes\fP, output values in the field=value -pairs are not quoted. -.SH SEE ALSO -.BR lvm (8), -.BR pvdisplay (8), -.BR lvs (8), -.BR vgs (8) diff --git a/man/pvscan.8.in b/man/pvscan.8.des similarity index 68% rename from man/pvscan.8.in rename to man/pvscan.8.des index 5ff5fa554..ab8c50cf7 100644 --- a/man/pvscan.8.in +++ b/man/pvscan.8.des @@ -1,46 +1,6 @@ -.TH PVSCAN 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -pvscan \(em scan all disks for physical volumes +pvscan scans all supported LVM block devices in the system for PVs. -.SH SYNOPSIS -.B pvscan -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-e | \-\-exported ] -.RB [ \-n | \-\-novolumegroup ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-s | \-\-short ] -.RB [ \-u | \-\-uuid ] -.BR - -.B pvscan -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.B \-\-cache -.RB [ \-a | \-\-activate " " \fIay ] -.RB [ \-b | \-\-background ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-major -.I major -.B \-\-minor -.I minor -| -.IR DevicePath -| -.IR major:minor ]... - -.SH DESCRIPTION -pvscan scans all supported LVM block devices in the system for physical -volumes. - -.SS Scanning with lvmetad +\fBScanning with lvmetad\fP pvscan operates differently when used with the .BR lvmetad (8) @@ -72,8 +32,6 @@ scanning, an ordinary pvscan (without \-\-cache) will simply read metadata from lvmetad like other LVM commands. It does not do anything beyond displaying the current state of the cache. -.I Notes - .IP \[bu] 2 When given specific device name arguments, pvscan \-\-cache will only read the named devices. @@ -106,7 +64,9 @@ be temporarily disabled if they are seen. To notify lvmetad about a device that is no longer present, the major and minor numbers must be given, not the path. -.SS Automatic activation +.P + +\fBAutomatic activation\fP When event-driven system services detect a new LVM device, the first step is to automatically scan and cache the metadata from the device. This is @@ -130,8 +90,6 @@ fully integrated with the event-driven system services.) When a VG or LV is not auto-activated, traditional activation using vgchange or lvchange -a|--activate is needed. -.I Notes - .IP \[bu] 2 pvscan auto-activation can be only done in combination with \-\-cache. @@ -145,34 +103,3 @@ is used, the auto_activation_volume_list is applied. Auto-activation is not yet supported for LVs that are part of partial or clustered volume groups. -.P - -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-e ", " \-\-exported -Only show physical volumes belonging to exported volume groups. -.TP -.BR \-n ", " \-\-novolumegroup -Only show physical volumes not belonging to any volume group. -.TP -.BR \-s ", " \-\-short -Short listing format. -.TP -.BR \-u ", " \-\-uuid -Show UUIDs in addition to device names. -.TP -.BR \-a ", " \-\-activate " " \fIay -Automatically activate any logical volumes that are possible to activate -with the addition of the new devices. -.TP -.BR \-b ", " \-\-background -Run the command in the background. -.TP -.BR \-\-cache " [" \-\-major " " \fImajor " " \-\-minor " " \fIminor " | " \fIDevicePath " | " \fImajor:minor " ]..." -Scan one or more devices and send the metadata to lvmetad. - -.SH SEE ALSO -.BR lvm (8), -.BR lvmconfig (8), -.BR lvmetad (8) diff --git a/man/see_also.end b/man/see_also.end new file mode 100644 index 000000000..70eeb89cf --- /dev/null +++ b/man/see_also.end @@ -0,0 +1,67 @@ +.SH SEE ALSO + +.BR lvm (8) +.BR lvm.conf (5) +.BR lvmconfig (8) + +.BR pvchange (8) +.BR pvck (8) +.BR pvcreate (8) +.BR pvdisplay (8) +.BR pvmove (8) +.BR pvremove (8) +.BR pvresize (8) +.BR pvs (8) +.BR pvscan (8) + +.BR vgcfgbackup (8) +.BR vgcfgrestore (8) +.BR vgchange (8) +.BR vgck (8) +.BR vgcreate (8) +.BR vgconvert (8) +.BR vgdisplay (8) +.BR vgexport (8) +.BR vgextend (8) +.BR vgimport (8) +.BR vgimportclone (8) +.BR vgmerge (8) +.BR vgmknodes (8) +.BR vgreduce (8) +.BR vgremove (8) +.BR vgrename (8) +.BR vgs (8) +.BR vgscan (8) +.BR vgsplit (8) + +.BR lvcreate (8) +.BR lvchange (8) +.BR lvconvert (8) +.BR lvdisplay (8) +.BR lvextend (8) +.BR lvreduce (8) +.BR lvremove (8) +.BR lvrename (8) +.BR lvresize (8) +.BR lvs (8) +.BR lvscan (8) + +.BR lvm2-activation-generator (8) +.BR blkdeactivate (8) +.BR lvmdump (8) + +.BR dmeventd (8) +.BR lvmetad (8) +.BR lvmpolld (8) +.BR lvmlockd (8) +.BR lvmlockctl (8) +.BR clvmd (8) +.BR cmirrord (8) +.BR lvmdbusd (8) + +.BR lvmsystemid (7) +.BR lvmreport (7) +.BR lvmraid (7) +.BR lvmthin (7) +.BR lvmcache (7) + diff --git a/man/vgcfgbackup.8.des b/man/vgcfgbackup.8.des new file mode 100644 index 000000000..0720e017f --- /dev/null +++ b/man/vgcfgbackup.8.des @@ -0,0 +1,16 @@ +vgcfgbackup creates back up files containing metadata of VGs. +If no VGs are named, back up files are created for all VGs. +See \fBvgcfgrestore\fP for information on using the back up +files. + +In a default installation, each VG is backed up into a separate file +bearing the name of the VG in the directory \fI#DEFAULT_BACKUP_DIR#\fP. + +To use an alternative back up file, use \fB\-f\fP. In this case, when +backing up multiple VGs, the file name is treated as a template, with %s +replaced by the VG name. + +NB. This DOES NOT back up the data content of LVs. + +It may also be useful to regularly back up the files in +\fI#DEFAULT_SYS_DIR#\fP. diff --git a/man/vgcfgbackup.8.in b/man/vgcfgbackup.8.in deleted file mode 100644 index c6f20d997..000000000 --- a/man/vgcfgbackup.8.in +++ /dev/null @@ -1,36 +0,0 @@ -.TH VGCFGBACKUP 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgcfgbackup \(em backup volume group descriptor area -.SH SYNOPSIS -.B vgcfgbackup -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-f | \-\-file -.IR Filename ] -.RB [ \-h | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-v | \-\-verbose ] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgcfgbackup allows you to backup the metadata of your volume groups. -If you don't name any volume groups on the command line, all of them -will be backed up. -.sp -In a default installation, each volume group gets backed up into a separate -file bearing the name of the volume group in the directory -\fI#DEFAULT_BACKUP_DIR#\fP. -You can write the backup to an alternative file using \fB\-f\fP. In this case -if you are backing up more than one volume group the filename is -treated as a template, and %s gets replaced by the volume group name. -.sp -NB. This DOESN'T backup user/system data in logical -volume(s)! Backup \fI#DEFAULT_SYS_DIR#\fP regularly too. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.SH SEE ALSO -.BR lvm (8), -.BR vgcfgrestore (8) diff --git a/man/vgcfgrestore.8.des b/man/vgcfgrestore.8.des new file mode 100644 index 000000000..cb7867d3b --- /dev/null +++ b/man/vgcfgrestore.8.des @@ -0,0 +1,8 @@ +vgcfgrestore restores the metadata of a VG from a text back up file +produced by \fBvgcfgbackup\fP. This writes VG metadata onto the devices +specifed in back up file. + +A back up file can be specified with \fB\-\-file\fP. If no backup file is +specified, the most recent one is used. Use \fB\-\-list\fP for a list of +the available back up and archive files of a VG. + diff --git a/man/vgcfgrestore.8.end b/man/vgcfgrestore.8.end new file mode 100644 index 000000000..5ac451d74 --- /dev/null +++ b/man/vgcfgrestore.8.end @@ -0,0 +1,9 @@ +.SH NOTES + +To replace PVs, \fBvgdisplay \-\-partial \-\-verbose\fP will show the +UUIDs and sizes of any PVs that are no longer present. If a PV in the VG +is lost and you wish to substitute another of the same size, use +\fBpvcreate \-\-restorefile filename \-\-uuid uuid\fP (plus additional +arguments as appropriate) to initialise it with the same UUID as the +missing PV. Repeat for all other missing PVs in the VG. Then use +\fBvgcfgrestore \-\-file filename\fP to restore the VG's metadata. diff --git a/man/vgcfgrestore.8.in b/man/vgcfgrestore.8.in deleted file mode 100644 index 96b0a10a7..000000000 --- a/man/vgcfgrestore.8.in +++ /dev/null @@ -1,58 +0,0 @@ -.TH VGCFGRESTORE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgcfgrestore \(em restore volume group descriptor area -.SH SYNOPSIS -.B vgcfgrestore -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-f | \-\-file -.RI < filename >] -.RB [ \-\-force ] -.RB [ \-l [ l ]| \-\-list ] -.RB [ \-h | \-\-help ] -.RB [ \-M | \-\-metadatatype -.IR 1 | 2 ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RI \fIVolumeGroupName\fP -.SH DESCRIPTION -vgcfgrestore allows you to restore the metadata of \fIVolumeGroupName\fP -from a text backup file produced by \fBvgcfgbackup\fP. -You can specify a backup file with \fB\-\-file\fP. -If no backup file is specified, the most recent -one is used. Use \fB\-\-list\fP for a list of the available -backup and archive files of \fIVolumeGroupName\fP. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-l ", " \-\-list\fP -List files pertaining to \fIVolumeGroupName\fP -List metadata backup and archive files pertaining to \fIVolumeGroupName\fP. -May be used with the \fB\-f\fP option. Does not restore \fIVolumeGroupName\fP. -.TP -.BR \-f ", " \-\-file " " \fIfilename -Name of LVM metadata backup file -Specifies a metadata backup or archive file to be used for restoring -VolumeGroupName. Often this file has been created with \fBvgcfgbackup\fP. -.TP -.B \-\-force -Necessary to restore metadata with thin pool volumes. -.br -\fBWARNING: Use with extreme caution. -Most changes to thin metadata cannot be reverted. -You may lose data if you restore metadata that does not match the thin pool -kernel metadata precisely.\fP -.SH REPLACING PHYSICAL VOLUMES -\fBvgdisplay \-\-partial \-\-verbose\fP will show you the UUIDs and sizes of -any PVs that are no longer present. -If a PV in the VG is lost and you wish to substitute -another of the same size, use -\fBpvcreate \-\-restorefile filename \-\-uuid uuid\fP (plus additional -arguments as appropriate) to initialise it with the same UUID as -the missing PV. Repeat for all other missing PVs in the VG. -Then use \fBvgcfgrestore \-\-file filename\fP to restore the volume -group's metadata. -.SH SEE ALSO -.BR lvm (8), -.BR vgcreate (8) diff --git a/man/vgchange.8.des b/man/vgchange.8.des new file mode 100644 index 000000000..6b873d88e --- /dev/null +++ b/man/vgchange.8.des @@ -0,0 +1,2 @@ +vgchange changes VG attributes, changes LV activation in the kernel, and +includes other utilities for VG maintenance. diff --git a/man/vgchange.8.end b/man/vgchange.8.end new file mode 100644 index 000000000..a11bdd172 --- /dev/null +++ b/man/vgchange.8.end @@ -0,0 +1,16 @@ +.SH NOTES + +If vgchange recognizes COW snapshot LVs that were dropped because they ran +out of space, it displays a message informing the administrator that the +snapshots should be removed. + +.SH EXAMPLES + +Activate all LVs in all VGs on all existing devices. +.br +.B vgchange \-a y + +Change the maximum number of LVs for an inactive VG. +.br +.B vgchange \-l 128 vg00 + diff --git a/man/vgchange.8.in b/man/vgchange.8.in deleted file mode 100644 index 3b2fc3e4f..000000000 --- a/man/vgchange.8.in +++ /dev/null @@ -1,346 +0,0 @@ -.TH VGCHANGE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgchange \(em change attributes of a volume group -.SH SYNOPSIS -.B vgchange -.RB [ \-\-addtag -.IR Tag ] -.RB [ \-\-alloc -.IR AllocationPolicy ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-a | \-\-activate -.RI [ a | e | s | l ] -.RI { y | n }] -.RB [ \-\-activationmode -.IB { complete | degraded | partial } ] -.RB [ \-K | \-\-ignoreactivationskip ] -.RB [ \-\-monitor -.RI { y | n }] -.RB [ \-\-poll -.RI { y | n }] -.RB [ \-c | \-\-clustered -.RI { y | n }] -.RB [ \-u | \-\-uuid ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-\-deltag -.IR Tag ] -.RB [ \-\-detachprofile ] -.RB [ \-h | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoremonitoring ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-sysinit ] -.RB [ \-\-noudevsync ] -.RB [ \-\-lock\-start ] -.RB [ \-\-lock\-stop ] -.RB [ \-\-lock\-type -.IR LockType ] -.RB [ \-l | \-\-logicalvolume -.IR MaxLogicalVolumes ] -.RB [ \-p | \-\-maxphysicalvolumes -.IR MaxPhysicalVolumes ] -.RB [ \-\-metadataprofile -.IR ProfileName ] -.RB [ \-\- [ vg ] metadatacopies -.IR NumberOfCopies | unmanaged | all ] -.RB [ \-P | \-\-partial ] -.RB [ \-s | \-\-physicalextentsize -.IR PhysicalExtentSize [ bBsSkKmMgGtTpPeE ]] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-\-systemid -.IR SystemID ] -.RB [ \-\-refresh ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ \-x | \-\-resizeable -.RI { y | n }] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgchange allows you to change the attributes of one or more -volume groups. Its main purpose is to activate and deactivate -.IR VolumeGroupName , -or all volume groups if none is specified. Only active volume groups -are subject to changes and allow access to their logical volumes. -[Not yet implemented: During volume group activation, if -.B vgchange -recognizes snapshot logical volumes which were dropped because they ran -out of space, it displays a message informing the administrator that such -snapshots should be removed (see -.BR lvremove (8)). -] -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-A ", " \-\-autobackup " {" \fIy | \fIn } -Controls automatic backup of metadata after the change. See -.BR vgcfgbackup (8). -Default is yes. -.TP -.BR \-a ", " \-\-activate " [" \fIa | \fIe | \fIs | \fIl ]{ \fIy | \fIn } -Controls the availability of the logical volumes in the volume -group for input/output. -In other words, makes the logical volumes known/unknown to the kernel. -If autoactivation option is used (\-aay), each logical volume in -the volume group is activated only if it matches an item in the -activation/auto_activation_volume_list set in lvm.conf. If this -list is not set, then all volumes are considered for activation. -The \-aay option should be also used during system boot so it's -possible to select which volumes to activate using the -activation/auto_activation_volume_list settting. -.IP -Activation of a logical volume creates a symbolic link -/dev/VolumeGroupName/LogicalVolumeName pointing to the device node. -This link is removed on deactivation. -All software and scripts should access the device through -this symbolic link and present this as the name of the device. -The location and name of the underlying device node may depend on -the distribution and configuration (e.g. udev) and might change -from release to release. -.IP -In a clustered VG, clvmd is used for activation, and the -following options are possible: - -With \-aey, clvmd activates the LV in exclusive mode -(with an exclusive lock), allowing a single node to activate the LV. - -With \-asy, clvmd activates the LV in shared mode -(with a shared lock), allowing multiple nodes to activate the LV concurrently. -If the LV type prohibits shared access, such as an LV with a snapshot, -the 's' option is ignored and an exclusive lock is used. - -With \-ay (no mode specified), clvmd activates the LV in shared mode -if the LV type allows concurrent access, such as a linear LV. -Otherwise, clvmd activates the LV in exclusive mode. - -With \-aey, \-asy, and \-ay, clvmd attempts to activate the LV -on all nodes. If exclusive mode is used, then only one of the -nodes will be successful. - -With \-an, clvmd attempts to deactivate the LV on all nodes. - -With \-aly, clvmd activates the LV only on the local node, and \-aln -deactivates only on the local node. If the LV type allows concurrent -access, then shared mode is used, otherwise exclusive. - -LVs with snapshots are always activated exclusively because they can only -be used on one node at once. - -For local VGs, \-ay, \-aey, and \-asy are all equivalent. -.IP -In a shared VG, lvmlockd is used for locking if LVM is compiled with lockd -support, and the following options are possible: - -With \-aey, the command activates the LV in exclusive mode, allowing a -single host to activate the LV (the host running the command). Before -activating the LV, the command uses lvmlockd to acquire an exclusive lock -on the LV. If the lock cannot be acquired, the LV is not activated and an -error is reported. This would happen if the LV is active on another host. - -With \-asy, the command activates the LV in shared mode, allowing multiple -hosts to activate the LV concurrently. Before activating the LV, the -command uses lvmlockd to acquire a shared lock on the LV. If the lock -cannot be acquired, the LV is not activated and an error is reported. -This would happen if the LV is active exclusively on another host. If the -LV type prohibits shared access, such as a snapshot, the command will -report an error and fail. - -With \-an, the command deactivates the LV on the host running the command. -After deactivating the LV, the command uses lvmlockd to release the -current lock on the LV. - -With lvmlockd, an unspecified mode is always exclusive, \-ay defaults to -\-aey. - -.TP -.BR \-\-activationmode " {" \fIcomplete | \fIdegraded | \fIpartial } -The activation mode determines whether logical volumes are allowed to -activate when there are physical volumes missing (e.g. due to a device -failure). \fIcomplete\fP is the most restrictive; allowing only those -logical volumes to be activated that are not affected by the missing -PVs. \fIdegraded\fP allows RAID logical volumes to be activated even if -they have PVs missing. (Note that the "mirror" segment type is not -considered a RAID logical volume. The "raid1" segment type should -be used instead.) Finally, \fIpartial\fP allows any logical volume to -be activated even if portions are missing due to a missing or failed -PV. This last option should only be used when performing recovery or -repair operations. \fIdegraded\fP is the default mode. To change it, modify -.B activation_mode -in -.BR lvm.conf (5). -.TP -.BR \-K ", " \-\-ignoreactivationskip -Ignore the flag to skip Logical Volumes during activation. -.TP -.BR \-c ", " \-\-clustered " {" \fIy | \fIn } -If clustered locking is enabled, this indicates whether this -Volume Group is shared with other nodes in the cluster or whether -it contains only local disks that are not visible on the other nodes. -If the cluster infrastructure is unavailable on a particular node at a -particular time, you may still be able to use Volume Groups that -are not marked as clustered. -.TP -.BR \-\-detachprofile -Detach any metadata configuration profiles attached to given -Volume Groups. See \fBlvm.conf\fP(5) for more information -about \fBmetadata profiles\fP. -.TP -.BR \-u ", " \-\-uuid -Generate new random UUID for specified Volume Groups. -.TP -.BR \-\-monitor " {" \fIy | \fIn } -Start or stop monitoring a mirrored or snapshot logical volume with -dmeventd, if it is installed. -If a device used by a monitored mirror reports an I/O error, -the failure is handled according to -.B mirror_image_fault_policy -and -.B mirror_log_fault_policy -set in -.BR lvm.conf (5). -.TP -.BR \-\-poll " {" \fIy | \fIn } -Without polling a logical volume's backgrounded transformation process -will never complete. If there is an incomplete pvmove or lvconvert (for -example, on rebooting after a crash), use \fB\-\-poll y\fP to restart the -process from its last checkpoint. However, it may not be appropriate to -immediately poll a logical volume when it is activated, use -\fB\-\-poll n\fP to defer and then \fB\-\-poll y\fP to restart the process. -.TP -.BR \-\-sysinit -Indicates that vgchange(8) is being invoked from early system initialisation -scripts (e.g. rc.sysinit or an initrd), before writeable filesystems are -available. As such, some functionality needs to be disabled and this option -acts as a shortcut which selects an appropriate set of options. Currently -this is equivalent to using -.BR \-\-ignorelockingfailure , -.BR \-\-ignoremonitoring , -.B \-\-poll n -and setting \fBLVM_SUPPRESS_LOCKING_FAILURE_MESSAGES\fP -environment variable. - -If \fB\-\-sysinit\fP is used in conjunction with lvmetad(8) enabled and running, -autoactivation is preferred over manual activation via direct vgchange call. -Logical volumes are autoactivated according to auto_activation_volume_list -set in lvm.conf(5). -.TP -.BR \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.TP -.BR \-\-ignoremonitoring -Make no attempt to interact with dmeventd unless -.BR \-\-monitor -is specified. -Do not use this if dmeventd is already monitoring a device. -.TP -.BR \-\-lock\-start -Start the lockspace of a shared VG in lvmlockd. lvmlockd locks becomes -available for the VG, allowing LVM to use the VG. See -.BR lvmlockd (8). -.TP -.BR \-\-lock\-stop -Stop the lockspace of a shared VG in lvmlockd. lvmlockd locks become -unavailable for the VG, preventing LVM from using the VG. See -.BR lvmlockd (8). -.TP -.BR \-\-lock\-type " " \fILockType -Change the VG lock type to or from a shared lock type used with lvmlockd. See -.BR lvmlockd (8). -.TP -.BR \-l ", " \-\-logicalvolume " " \fIMaxLogicalVolumes -Changes the maximum logical volume number of an existing inactive -volume group. -.TP -.BR \-p ", " \-\-maxphysicalvolumes " " \fIMaxPhysicalVolumes -Changes the maximum number of physical volumes that can belong -to this volume group. -For volume groups with metadata in lvm1 format, the limit is 255. -If the metadata uses lvm2 format, the value 0 removes this restriction: -there is then no limit. If you have a large number of physical volumes in -a volume group with metadata in lvm2 format, for tool performance reasons, -you should consider some use of \fB\-\-pvmetadatacopies 0\fP as described in -\fBpvcreate(8)\fP, and/or use \fB\-\-vgmetadatacopies\fP. -.TP -.BR \-\-metadataprofile " " \fIProfileName -Uses and attaches ProfileName configuration profile to the volume group -metadata. Whenever the volume group is processed next time, the profile -is automatically applied. The profile is inherited by all logical volumes -in the volume group unless the logical volume itself has its own profile -attached. See \fBlvm.conf\fP(5) for more information about \fBmetadata profiles\fP. -.TP -.BR \-\- [ vg ] metadatacopies " " \fINumberOfCopies | \fIunmanaged | \fIall -Sets the desired number of metadata copies in the volume group. If set to -a non-zero value, LVM will automatically manage the 'metadataignore' -flags on the physical volumes (see \fBpvchange\fP or \fBpvcreate \-\-metadataignore\fP) in order -to achieve \fINumberOfCopies\fP copies of metadata. If set to \fIunmanaged\fP, -LVM will not automatically manage the 'metadataignore' flags. If set to -\fIall\fP, LVM will first clear all of the 'metadataignore' flags on all -metadata areas in the volume group, then set the value to \fIunmanaged\fP. -The \fBvgmetadatacopies\fP option is useful for volume groups containing -large numbers of physical volumes with metadata as it may be used to -minimize metadata read and write overhead. -.TP -.BR \-s ", " \-\-physicalextentsize " " \fIPhysicalExtentSize [ \fIBbBsSkKmMgGtTpPeE ] -Changes the physical extent size on physical volumes of this volume group. -A size suffix (k for kilobytes up to t for terabytes) is optional, megabytes -is the default if no suffix is present. For LVM2 format, the value must be a -power of 2 of at least 1 sector (where the sector size is the largest sector -size of the PVs currently used in the VG) or, if not a power of 2, at least -128KiB. For the older LVM1 format, it must be a power of 2 of at least 8KiB. -The default is 4 MiB. - -Before increasing the physical extent size, you might need to use lvresize, -pvresize and/or pvmove so that everything fits. For example, every -contiguous range of extents used in a logical volume must start and -end on an extent boundary. - -If the volume group metadata uses lvm1 format, extents can vary in size from -8KiB to 16GiB and there is a limit of 65534 extents in each logical volume. -The default of 4 MiB leads to a maximum logical volume size of around 256GiB. - -If the volume group metadata uses lvm2 format those restrictions do not apply, -but having a large number of extents will slow down the tools but have no -impact on I/O performance to the logical volume. The smallest PE is 1KiB. - -The 2.4 kernel has a limitation of 2TiB per block device. -.TP -.BR \-\-systemid " " \fISystemID -Changes the system ID of the VG. Using this option requires caution -because the VG may become foreign to the host running the command, -leaving the host unable to access it. See -.BR lvmsystemid (7). -.TP -.BR \-\-refresh -If any logical volume in the volume group is active, reload its metadata. -This is not necessary in normal operation, but may be useful -if something has gone wrong or if you're doing clustering -manually without a clustered lock manager. -.TP -.BR \-x ", " \-\-resizeable " {" \fIy | \fIn } -Enables or disables the extension/reduction of this volume group -with/by physical volumes. -.SH Examples -To activate all known volume groups in the system: -.sp -.B vgchange \-a y - -To change the maximum number of logical volumes of inactive volume group -vg00 to 128. -.sp -.B vgchange \-l 128 /dev/vg00 - - -.SH SEE ALSO -.BR lvchange (8), -.BR lvm (8), -.BR vgcreate (8) diff --git a/man/vgck.8.des b/man/vgck.8.des new file mode 100644 index 000000000..24e1dbe7d --- /dev/null +++ b/man/vgck.8.des @@ -0,0 +1 @@ +vgck checks LVM metadata for consistency. diff --git a/man/vgck.8.in b/man/vgck.8.in deleted file mode 100644 index b10f57e78..000000000 --- a/man/vgck.8.in +++ /dev/null @@ -1,22 +0,0 @@ -.TH VGCK 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgck \(em check volume group metadata -.SH SYNOPSIS -.B vgck -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-v | \-\-verbose ] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgck checks LVM metadata for each named volume group for consistency. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.SH SEE ALSO -.BR lvm (8), -.BR vgcreate (8), -.BR vgchange (8), -.BR vgscan (8) diff --git a/man/vgconvert.8.des b/man/vgconvert.8.des new file mode 100644 index 000000000..47bc0cc79 --- /dev/null +++ b/man/vgconvert.8.des @@ -0,0 +1,7 @@ +vgconvert converts VG metadata from one format to another. The new +metadata format must be able to fit into the space provided by the old +format. + +Because the LVM1 format should no longer be used, this command is no +longer needed in general. + diff --git a/man/vgconvert.8.in b/man/vgconvert.8.in deleted file mode 100644 index d86448311..000000000 --- a/man/vgconvert.8.in +++ /dev/null @@ -1,48 +0,0 @@ -.TH VGCONVERT 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgconvert \- convert volume group metadata format -.SH SYNOPSIS -.B vgconvert -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-labelsector ] -.RB [ \-\-bootloaderareasize -.IR size ] -.RB [ \-M | \-\-metadatatype -.IR type ] -.RB [ \-\-pvmetadatacopies -.IR NumberOfCopies ] -.RB [ \-\-metadatasize -.IR size ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-version ] -.I VolumeGroupName -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgconvert converts -.I VolumeGroupName -metadata from one format to another provided that the metadata -fits into the same space. -.SH OPTIONS -See \fBlvm\fP(8) and \fBpvcreate\fP(8) for options. -.SH Examples -Convert volume group vg1 from LVM1 metadata format to the new LVM2 -metadata format. -.sp -.B vgconvert \-M2 vg1 -.SH RECOVERY -Use \fBpvscan\fP(8) to see which PVs lost their metadata. -Run \fBpvcreate\fP(8) with the \fB\-\-uuid\fP and \fB\-\-restorefile\fP -options on each such PV to reformat it as it was, using the archive -file that \fBvgconvert\fP(8) created at the start of the procedure. -Finally run \fBvgcfgrestore\fP(8) with that archive file to restore -the original metadata. -.SH SEE ALSO -.BR lvm (8), -.BR pvcreate (8), -.BR vgcfgrestore (8) diff --git a/man/vgcreate.8.des b/man/vgcreate.8.des new file mode 100644 index 000000000..a2d716169 --- /dev/null +++ b/man/vgcreate.8.des @@ -0,0 +1,4 @@ +vgcreate creates a new VG on block devices. If the devices were not +previously intialized as PVs with \fBpvcreate\fP(8), vgcreate will +inititialize them, making them PVs. The pvcreate options for initializing +devices are also available with vgcreate. diff --git a/man/vgcreate.8.end b/man/vgcreate.8.end new file mode 100644 index 000000000..66bcfbba1 --- /dev/null +++ b/man/vgcreate.8.end @@ -0,0 +1,6 @@ +.SH EXAMPLES + +Create a VG with two PVs, using the default physical extent size. +.br +.B vgcreate myvg /dev/sdk1 /dev/sdl1 + diff --git a/man/vgcreate.8.in b/man/vgcreate.8.in deleted file mode 100644 index c66753b73..000000000 --- a/man/vgcreate.8.in +++ /dev/null @@ -1,187 +0,0 @@ -.TH VGCREATE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgcreate \(em create a volume group -.SH SYNOPSIS -.B vgcreate -.RB [ \-\-addtag -.IR Tag ] -.RB [ \-\-alloc -.IR AllocationPolicy ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-c | \-\-clustered -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-l | \-\-maxlogicalvolumes -.IR MaxLogicalVolumes ] -.RB [ \-M | \-\-metadatatype -.IR type ] -.RB [ \-\-metadataprofile -.IR ProfileName ] -.RB [ \-p | \-\-maxphysicalvolumes -.IR MaxPhysicalVolumes ] -.RB [ \-\- [ vg ] metadatacopies -.IR NumberOfCopies | unmanaged | all ] -.RB [ \-s | \-\-physicalextentsize -.IR PhysicalExtentSize [ bBsSkKmMgGtTpPeE ]] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-shared ] -.RB [ \-\-systemid -.IR SystemID ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RB [ "PHYSICAL DEVICE OPTIONS" ] -.I VolumeGroupName PhysicalDevicePath -.RI [ PhysicalDevicePath ...] -.SH DESCRIPTION -vgcreate creates a new volume group called -.I VolumeGroupName -using the block special device \fIPhysicalDevicePath\fP. -.sp -If \fIPhysicalDevicePath\fP was not previously configured for LVM with -\fBpvcreate\fP(8), the device will be initialized with the same -default values used with \fBpvcreate\fP(8). If non-default -\fPpvcreate\fP values are desired, they may be given on the -commandline with the same options as \fBpvcreate\fP(8). See -.B PHYSICAL DEVICE OPTIONS -for available options. Note that the restore-related options such as -.BR \-\-restorefile ", " \-\-uuid " and " \-\-physicalvolumesize -are not available. If a restore operation is needed, use -\fBpvcreate\fP(8) and \fBvgcfgrestore\fP(8). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-c ", " \-\-clustered " {" \fIy | \fIn } -If clustered locking is enabled, this defaults to \fBy\fP indicating that -this Volume Group is shared with other nodes in the cluster. - -If the new Volume Group contains only local disks that are not visible -on the other nodes, you must specify \fB\-\-clustered\ n\fP. -If the cluster infrastructure is unavailable on a particular node at a -particular time, you may still be able to use such Volume Groups. -.TP -.BR \-l ", " \-\-maxlogicalvolumes " " \fIMaxLogicalVolumes -Sets the maximum number of logical volumes allowed in this -volume group. -The setting can be changed with \fBvgchange\fP(8). -For volume groups with metadata in lvm1 format, the limit -and default value is 255. -If the metadata uses lvm2 format, the default value is 0 -which removes this restriction: there is then no limit. -.TP -.BR \-p ", " \-\-maxphysicalvolumes " " \fIMaxPhysicalVolumes -Sets the maximum number of physical volumes that can belong -to this volume group. -The setting can be changed with \fBvgchange\fP. -For volume groups with metadata in lvm1 format, the limit -and default value is 255. -If the metadata uses lvm2 format, the value 0 removes this restriction: -there is then no limit. If you have a large number of physical volumes in -a volume group with metadata in lvm2 format, for tool performance reasons, -you should consider some use of \fB\-\-pvmetadatacopies 0\fP as described in -\fBpvcreate\fP(8), and/or use \fB\-\-vgmetadatacopies\fP. -.TP -.BR \-\- [ vg ] metadatacopies " " \fINumberOfCopies | \fIunmanaged | \fIall -Sets the desired number of metadata copies in the volume group. If set to -a non-zero value, LVM will automatically manage the 'metadataignore' -flags on the physical volumes (see \fBpvcreate\fP(8) or -\fBpvchange \-\-metadataignore\fP) in order -to achieve \fINumberOfCopies\fP copies of metadata. If set to \fIunmanaged\fP, -LVM will not automatically manage the 'metadataignore' flags. If set to -\fIall\fP, LVM will first clear all of the 'metadataignore' flags on all -metadata areas in the volume group, then set the value to \fIunmanaged\fP. -The \fBvgmetadatacopies\fP option is useful for volume groups containing -large numbers of physical volumes with metadata as it may be used to -minimize metadata read and write overhead. -The default value is \fIunmanaged\fP. -.TP -.BR \-\-metadataprofile " " \fIProfileName -Uses and attaches the ProfileName configuration profile to the volume group -metadata. Whenever the volume group is processed next time, the profile is -automatically applied. The profile is inherited by all logical volumes in -the volume group unless the logical volume itself has its own profile attached. -See \fBlvm.conf\fP(5) for more information about \fBmetadata profiles\fP. -.TP -.BR \-s ", " \-\-physicalextentsize " " \fIPhysicalExtentSize [ \fIbBsSkKmMgGtTpPeE ] -Sets the physical extent size on physical volumes of this volume group. -A size suffix (k for kilobytes up to t for terabytes) is optional, megabytes -is the default if no suffix is present. For LVM2 format, the value must be a -power of 2 of at least 1 sector (where the sector size is the largest sector -size of the PVs currently used in the VG) or, if not a power of 2, at least -128KiB. For the older LVM1 format, it must be a power of 2 of at least 8KiB. -The default is 4 MiB. -Once this value has been set, it is difficult to change it without recreating -the volume group which would involve backing up and restoring data on any -logical volumes. However, if no extents need moving for the new -value to apply, it can be altered using \fBvgchange \-s\fP. - -If the volume group metadata uses lvm1 format, extents can vary in size from -8KiB to 16GiB and there is a limit of 65534 extents in each logical volume. The -default of 4 MiB leads to a maximum logical volume size of around 256GiB. - -If the volume group metadata uses lvm2 format those restrictions do not apply, -but having a large number of extents will slow down the tools but have no -impact on I/O performance to the logical volume. The smallest PE is 1KiB - -The 2.4 kernel has a limitation of 2TiB per block device. - -.TP -.B \-\-shared -Create a shared VG using lvmlockd if LVM is compiled with lockd support. - lvmlockd will select lock type sanlock or dlm depending on which lock -manager is running. This allows multiple hosts to share a VG on shared -devices. lvmlockd and a lock manager must be configured and running. See -.BR lvmlockd (8). - -.TP -.BR \-\-systemid " " \fISystemID -Specifies the system ID that will be given to the new VG, overriding the -system ID of the host running the command. A VG is normally created -without this option, in which case the new VG is given the system ID of -the host creating it. Using this option requires caution because the -system ID of the new VG may not match the system ID of the host running -the command, leaving the VG inaccessible to the host. See -.BR lvmsystemid (7). - -.SH PHYSICAL DEVICE OPTIONS -The following options are available for initializing physical devices in the -volume group. These options are further described in the \fBpvcreate\fP(8) -man page. -.TP -.BR \-f ", " \-\-force -.TP -.BR \-y ", " \-\-yes -.TP -.BR \-Z ", " \-\-zero " {" \fIy | \fIn } -.TP -.B \-\-labelsector \fIsector -.TP -.B \-\-metadatasize \fIsize -.TP -.B \-\-pvmetadatacopies \fIcopies -.TP -.B \-\-dataalignment \fIalignment -.TP -.B \-\-dataalignmentoffset \fIalignment_offset -.SH Examples -Creates a volume group named "test_vg" using physical volumes "/dev/sdk1" -and "/dev/sdl1" with default physical extent size of 4MiB: -.sp -.B vgcreate test_vg /dev/sdk1 /dev/sdl1 - -.SH SEE ALSO -.BR lvm (8), -.BR pvdisplay (8), -.BR pvcreate (8), -.BR vgdisplay (8), -.BR vgextend (8), -.BR vgreduce (8), -.BR lvcreate (8), -.BR lvdisplay (8), -.BR lvextend (8), -.BR lvreduce (8) diff --git a/man/vgdisplay.8.des b/man/vgdisplay.8.des new file mode 100644 index 000000000..c42f8218b --- /dev/null +++ b/man/vgdisplay.8.des @@ -0,0 +1,4 @@ +vgdisplay shows the attributes of VGs, and the associated PVs and LVs. + +\fBvgs\fP(8) is a preferred alternative that shows the same information +and more, using a more compact and configurable output format. diff --git a/man/vgdisplay.8.in b/man/vgdisplay.8.in deleted file mode 100644 index 045a6aef9..000000000 --- a/man/vgdisplay.8.in +++ /dev/null @@ -1,123 +0,0 @@ -.TH VGDISPLAY 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgdisplay \(em display attributes of volume groups -.SH SYNOPSIS -.B vgdisplay -.RB [ \-A | \-\-activevolumegroups ] -.RB [ \-c | \-\-colon ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-s | \-\-short ] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-v | \-\-verbose ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-\-version ] -.RI [ VolumeGroupName ...] -.br - -.br -.B vgdisplay -.BR \-C | \-\-columns -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-logonly ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgdisplay allows you to see the attributes of -.I VolumeGroupName -(or all volume groups if none is given) with it's physical and logical -volumes and their sizes etc. -.P -\fBvgs\fP(8) is an alternative that provides the same information -in the style of \fBps\fP(1). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-A ", " \-\-activevolumegroups -Only select the active volume groups. The volume group is considered active -if at least one of its logical volumes is active. -.TP -.BR \-C ", " \-\-columns -Display output in columns, the equivalent of \fBvgs\fP(8). -Options listed are the same as options given in \fPvgs\fP(8). -.TP -.BR \-c ", " \-\-colon -Generate colon separated output for easier parsing in scripts or programs. -N.B. \fBvgs\fP(8) provides considerably more control over the output. -.nf - -The values are: - -1 volume group name -2 volume group access -3 volume group status -4 internal volume group number -5 maximum number of logical volumes -6 current number of logical volumes -7 open count of all logical volumes in this volume group -8 maximum logical volume size -9 maximum number of physical volumes -10 current number of physical volumes -11 actual number of physical volumes -12 size of volume group in kilobytes -13 physical extent size -14 total number of physical extents for this volume group -15 allocated number of physical extents for this volume group -16 free number of physical extents for this volume group -17 uuid of volume group - -.fi -.TP -.BR \-s ", " \-\-short -Give a short listing showing the existence of volume groups. -.TP -.BR \-v ", " \-\-verbose -Display verbose information containing long listings of physical -and logical volumes. If given twice, also display verbose runtime -information of vgdisplay's activities. -.TP -.B \-\-version -Display version and exit successfully. -.SH SEE ALSO -.BR lvm (8), -.BR vgs (8), -.BR pvcreate (8), -.BR vgcreate (8), -.BR lvcreate (8) diff --git a/man/vgexport.8.des b/man/vgexport.8.des new file mode 100644 index 000000000..f9fa49c9b --- /dev/null +++ b/man/vgexport.8.des @@ -0,0 +1,8 @@ +vgexport makes inactive VGs unknown to the system. In this state, all the +PVs in the VG can be moved to a different system, from which +\fBvgimport\fP can then be run. + +Most LVM tools ignore exported VGs. + +vgexport clears the VG system ID, and vgimport sets the VG system ID to +match the host running vgimport (if the host has a system ID). diff --git a/man/vgexport.8.in b/man/vgexport.8.in deleted file mode 100644 index 6e2ecbf00..000000000 --- a/man/vgexport.8.in +++ /dev/null @@ -1,37 +0,0 @@ -.TH VGEXPORT 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgexport \- make volume groups unknown to the system -.SH SYNOPSIS -.B vgexport -.RB [ \-a | \-\-all ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-v | \-\-verbose ] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgexport allows you to make the inactive -.IR VolumeGroupName (s) -unknown to the system. -You can then move all the Physical Volumes in that Volume Group to -a different system for later -.BR vgimport (8). -Most LVM2 tools ignore exported Volume Groups. -vgexport clears the VG system ID, and vgimport sets the VG system ID -to match the host running vgimport (if the host has a system ID). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-a ", " \-\-all -Export all inactive Volume Groups. -.SH SEE ALSO -.BR lvm (8), -.BR pvscan (8), -.BR vgimport (8), -.BR vgscan (8), -.BR lvmsystemid (7) diff --git a/man/vgextend.8.des b/man/vgextend.8.des new file mode 100644 index 000000000..85fe6fcdf --- /dev/null +++ b/man/vgextend.8.des @@ -0,0 +1,11 @@ +vgextend adds one or more PVs to a VG. This increases the space available +for LVs in the VG. + +Also, PVs that have gone missing and then returned, e.g. due to a +transient device failure, can be added back to the VG without +re-initializing them (see \-\-restoremissing). + +If the specified PVs have not yet been initialized with pvcreate, vgextend +will initialize them. In this case pvcreate options can be used, e.g. +\-\-labelsector, \-\-metadatasize, \-\-metadataignore, +\-\-pvmetadatacopies, \-\-dataalignment, \-\-dataalignmentoffset. diff --git a/man/vgextend.8.end b/man/vgextend.8.end new file mode 100644 index 000000000..e50fcce8d --- /dev/null +++ b/man/vgextend.8.end @@ -0,0 +1,6 @@ +.SH EXAMPLES + +Add two PVs to a VG. +.br +.B vgextend vg00 /dev/sda4 /dev/sdn1 + diff --git a/man/vgextend.8.in b/man/vgextend.8.in deleted file mode 100644 index 51bd61545..000000000 --- a/man/vgextend.8.in +++ /dev/null @@ -1,71 +0,0 @@ -.TH VGEXTEND 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgextend \(em add physical volumes to a volume group -.SH SYNOPSIS -.B vgextend -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-restoremissing ] -.RB [ \-f | \-\-force ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RB [ "PHYSICAL DEVICE OPTIONS" ] -.I VolumeGroupName PhysicalDevicePath -.RI [ PhysicalDevicePath ...] -.SH DESCRIPTION -vgextend allows you to add one or more initialized physical volumes -(see \fBpvcreate\fP(8)) to an existing volume group to extend it in size. Moreover, it allows you to -re-add a physical volume that has gone missing previously, due to a transient -device failure, without re-initialising it. Use -\fBvgextend \-\-restoremissing\fP to that effect. -.sp -If \fIPhysicalDevicePath\fP was not previously configured for LVM with -\fBpvcreate\fP(8), the device will be initialized with the same -default values used with \fBpvcreate\fP(8). If non-default -\fPpvcreate\fP(8) values are desired, they may be given on the -commandline with the same options as \fPpvcreate\fP(8). See -.B PHYSICAL DEVICE OPTIONS -for available options. Note that the restore-related options such as -.BR \-\-restorefile ", " \-\-uuid " and " \-\-physicalvolumesize -are not available. If a restore operation -is needed, use \fBpvcreate\fP(8) and \fBvgcfgrestore\fP(8). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.SH PHYSICAL DEVICE OPTIONS -The following options are available for initializing physical devices in the -volume group. These options are further described in the -\fBpvcreate\fP(8) man page. -.TP -.BR \-f ", " \-\-force -.TP -.BR \-y ", " \-\-yes -.TP -.BR \-Z ", " \-\-zero " {" \fIy | \fIn } -.TP -.B \-\-labelsector \fIsector -.TP -.B \-\-metadatasize \fIsize -.TP -.BR \-\-metadataignore " {" \fIy | \fIn } -.TP -.B \-\-pvmetadatacopies \fIcopies -.TP -.B \-\-dataalignment \fIalignment -.TP -.B \-\-dataalignmentoffset \fIalignment_offset -.SH Examples -Extends the existing volume group "vg00" by the new physical volumes -(see \fBpvcreate\fP(8)) "/dev/sda4" and "/dev/sdn1". -.sp -.B vgextend vg00 /dev/sda4 /dev/sdn1 -.SH SEE ALSO -.BR lvm (8), -.BR vgcreate (8), -.BR vgreduce (8), -.BR pvcreate (8) diff --git a/man/vgimport.8.des b/man/vgimport.8.des new file mode 100644 index 000000000..91196b683 --- /dev/null +++ b/man/vgimport.8.des @@ -0,0 +1,5 @@ +vgimport makes exported VGs known to the system again, perhaps after +moving the PVs from a different system. + +vgexport clears the VG system ID, and vgimport sets the VG system ID to +match the host running vgimport (if the host has a system ID). diff --git a/man/vgimport.8.in b/man/vgimport.8.in deleted file mode 100644 index ba4fdf9a7..000000000 --- a/man/vgimport.8.in +++ /dev/null @@ -1,38 +0,0 @@ -.TH VGIMPORT 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgimport \(em make exported volume groups known to the system -.SH SYNOPSIS -.B vgimport -.RB [ \-a | \-\-all ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-v | \-\-verbose ] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgimport allows you to make a Volume Group that was previously -exported using -.BR vgexport (8) -known to the system again, perhaps after moving its Physical Volumes -from a different machine. -vgexport clears the VG system ID, and vgimport sets the VG system ID -to match the host running vgimport (if the host has a system ID). -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-a ", " \-\-all -Import all exported Volume Groups. -.TP -.BR \-\-force -Import exported Volume Groups even if there are missing Physical Volumes. -This option should only be used if the missing devices are known to have -failed and they cannot be restored. -.SH SEE ALSO -.BR lvm (8), -.BR pvscan (8), -.BR vgexport (8), -.BR vgscan (8), -.BR lvmsystemid (7) diff --git a/man/vgimportclone.8.des b/man/vgimportclone.8.des new file mode 100644 index 000000000..a5002da6d --- /dev/null +++ b/man/vgimportclone.8.des @@ -0,0 +1,6 @@ +vgimportclone imports a VG from duplicated PVs, e.g. created by a hardware +snapshot of existing PVs. + +A duplicated VG cannot used until it is made to coexist with the original +VG. vgimportclone renames the VG associated with the specified PVs and +changes the associated VG and PV UUIDs. diff --git a/man/vgimportclone.8.end b/man/vgimportclone.8.end new file mode 100644 index 000000000..83394b581 --- /dev/null +++ b/man/vgimportclone.8.end @@ -0,0 +1,9 @@ +.SH EXAMPLES + +An original VG "vg00" has PVs "/dev/sda" and "/dev/sdb". +The corresponding PVs from a hardware snapshot are "/dev/sdc" and "/dev/sdd". +Rename the VG associated with "/dev/sdc" and "/dev/sdd" from "vg00" to "vg00_snap" +(and change associated UUIDs). +.br +.B vgimportclone \-\-basevgname vg00_snap /dev/sdc /dev/sdd + diff --git a/man/vgimportclone.8.in b/man/vgimportclone.8.in deleted file mode 100644 index cdf5e6893..000000000 --- a/man/vgimportclone.8.in +++ /dev/null @@ -1,46 +0,0 @@ -.TH VGIMPORTCLONE 8 "LVM TOOLS #VERSION#" "Red Hat, Inc." \" -*- nroff -*- -.SH NAME -vgimportclone \(em import and rename duplicated volume group (e.g. a hardware snapshot) -.SH SYNOPSIS -.B vgimportclone -.RB [ \-n | \-\-basevgname -.IR VolumeGroupName ] -.RB [ \-i | \-\-import ] -.I PhysicalVolume -.RI [ PhysicalVolume ...] -.SH DESCRIPTION -vgimportclone is used to import a duplicated VG (e.g. hardware snapshot). -Duplicate VG(s) and PV(s) are not able to be used until they are made -to coexist with the origin VG(s) and PV(s). -vgimportclone renames the VG associated with the specified PV(s) and -changes the associated VG and PV UUIDs. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-n ", " \-\-basevgname " " \fIVolumeGroupName -By default the snapshot VG will be renamed to the original name plus a -numeric suffix to avoid duplicate naming (e.g. 'test_vg' would be renamed -to 'test_vg1'). This option will override the base VG name that is -used for all VG renames. If a VG already exists with the specified name -a numeric suffix will be added (like the previous example) to make it unique. -.TP -.BR \-i ", " \-\-import -Import exported Volume Groups. Otherwise VGs that have been exported -will not be changed (nor will their associated PVs). -.SH ENVIRONMENT VARIABLES -.TP -.B LVM_BINARY -The LVM2 binary to use. Defaults to "lvm". -.SH Examples -The origin VG "vg00" has origin PVs "/dev/sda" and "/dev/sdb" -and the respective snapshot PVs are "/dev/sdc" and "/dev/sdd". -To rename the VG associated with "/dev/sdc" and "/dev/sdd" -from "vg00" to "vg00_snap" -(and to change associated VG and PV UUIDs) do: -.sp -.B vgimportclone \-\-basevgname vg00_snap /dev/sdc /dev/sdd - -.SH SEE ALSO -.BR lvm (8), -.BR vgrename (8) - diff --git a/man/vgmerge.8.des b/man/vgmerge.8.des new file mode 100644 index 000000000..ff7c177c7 --- /dev/null +++ b/man/vgmerge.8.des @@ -0,0 +1,3 @@ +vgmerge merges two existing VGs. The inactive source VG is merged into the +destination VG if physical extent sizes are equal and PV and LV summaries +of both VGs fit into the destination VG's limits. diff --git a/man/vgmerge.8.end b/man/vgmerge.8.end new file mode 100644 index 000000000..9787c6a82 --- /dev/null +++ b/man/vgmerge.8.end @@ -0,0 +1,7 @@ +.SH EXAMPLES + +Merge an inactive VG named "vg00" into the active or inactive VG named +"databases", giving verbose runtime information. +.br +.B vgmerge \-v databases vg00 + diff --git a/man/vgmerge.8.in b/man/vgmerge.8.in deleted file mode 100644 index bfc8c34a6..000000000 --- a/man/vgmerge.8.in +++ /dev/null @@ -1,41 +0,0 @@ -.TH VGMERGE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgmerge \(em merge two volume groups -.SH SYNOPSIS -.B vgmerge -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-l | \-\-list ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.I DestinationVolumeGroupName -.I SourceVolumeGroupName -.SH DESCRIPTION -vgmerge merges two existing volume groups. The inactive -\fISourceVolumeGroupName\fP will be merged into -the \fIDestinationVolumeGroupName\fP if physical extent sizes -are equal and physical and logical volume summaries of both volume groups -fit into \fIDestinationVolumeGroupName\fP's limits. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-l ", " \-\-list -Display merged \fIDestinationVolumeGroupName\fP like \fBvgdisplay \-v\fP. -.TP -.BR \-t ", " \-\-test -Do a test run WITHOUT making any real changes. -.SH Examples -Merge the inactive volume group named "my_vg" -into the active or inactive volume group named "databases" giving verbose -runtime information: -.sp -.B vgmerge \-v databases my_vg -.SH SEE ALSO -.BR lvm (8), -.BR vgcreate (8), -.BR vgextend (8), -.BR vgreduce (8) diff --git a/man/vgmknodes.8.des b/man/vgmknodes.8.des new file mode 100644 index 000000000..a93d629e1 --- /dev/null +++ b/man/vgmknodes.8.des @@ -0,0 +1,5 @@ +vgmknodes checks the LVM device nodes in /dev that are needed for active +LVs and creates any that are missing and removes unused ones. + +This command should not usually be needed if all the system components are +interoperating correctly. diff --git a/man/vgmknodes.8.in b/man/vgmknodes.8.in deleted file mode 100644 index c5bb5d493..000000000 --- a/man/vgmknodes.8.in +++ /dev/null @@ -1,30 +0,0 @@ -.TH VGMKNODES 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgmknodes \(em recreate volume group directory and logical volume special files -.SH SYNOPSIS -.B vgmknodes -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-\-refresh ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-v | \-\-verbose ] -.RI [[ VolumeGroupName | LogicalVolumePath ]...] -.SH DESCRIPTION -Checks the LVM2 special files in /dev that are needed for active -logical volumes and creates any missing ones and removes unused ones. -.SH OPTIONS -.TP -See \fBlvm\fP(8) for common options. -.TP -.BR \-\-refresh -If any logical volume in the volume group is active, reload its metadata. -This is not necessary in normal operation, but may be useful -if something has gone wrong or if you're doing clustering -manually without a clustered lock manager. -.SH SEE ALSO -.BR lvm (8), -.BR vgscan (8), -.BR dmsetup (8) diff --git a/man/vgreduce.8.des b/man/vgreduce.8.des new file mode 100644 index 000000000..1bcdaf9ff --- /dev/null +++ b/man/vgreduce.8.des @@ -0,0 +1 @@ +vgreduce removes one or more unused PVs from a VG. diff --git a/man/vgreduce.8.in b/man/vgreduce.8.in deleted file mode 100644 index cce31e8f1..000000000 --- a/man/vgreduce.8.in +++ /dev/null @@ -1,49 +0,0 @@ -.TH VGREDUCE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgreduce \(em reduce a volume group -.SH SYNOPSIS -.B vgreduce -.RB [ \-a | \-\-all ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-removemissing ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.I VolumeGroupName -.RI [ PhysicalVolumePath ...] -.SH DESCRIPTION -vgreduce allows you to remove one or more unused physical volumes -from a volume group. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-a ", " \-\-all -Removes all empty physical volumes if none are given on command line. -.TP -.B \-\-removemissing -Removes all missing physical volumes from the volume group, if there are no -logical volumes allocated on those. This resumes normal operation of the volume -group (new logical volumes may again be created, changed and so on). - -If this is not possible (there are logical volumes referencing the missing -physical volumes) and you cannot or do not want to remove them manually, you -can run this option with \fB\-\-force\fP to have \fBvgreduce\fP -remove any partial LVs. - -Any logical volumes and dependent snapshots that were partly on the -missing disks get removed completely. This includes those parts -that lie on disks that are still present. - -If your logical volumes spanned several disks including the ones that are -lost, you might want to try to salvage data first by activating your -logical volumes with \fB\-\-partial\fP as described in \fBlvm\fP(8). - -.SH SEE ALSO -.BR lvm (8), -.BR vgextend (8) diff --git a/man/vgremove.8.des b/man/vgremove.8.des new file mode 100644 index 000000000..04dc0e30a --- /dev/null +++ b/man/vgremove.8.des @@ -0,0 +1,6 @@ +vgremove removes one or more VGs. If LVs exist in the VG, a prompt is used +to confirm LV removal. + +If one or more PVs in the VG are lost, consider +\fBvgreduce \-\-removemissing\fP to make the VG +metadata consistent again. diff --git a/man/vgremove.8.in b/man/vgremove.8.in deleted file mode 100644 index 4e600ef4f..000000000 --- a/man/vgremove.8.in +++ /dev/null @@ -1,46 +0,0 @@ -.TH VGREMOVE 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgremove \(em remove a volume group -.SH SYNOPSIS -.B vgremove -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-f | \-\-force ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-noudevsync ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-S | \-\-select -.IR Selection ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.RI [ VolumeGroupName ...] -.SH DESCRIPTION -vgremove allows you to remove one or more volume groups. -If one or more physical volumes in the volume group are lost, -consider \fBvgreduce \-\-removemissing\fP to make the volume group -metadata consistent again. -.sp -If there are logical volumes that exist in the volume group, -a prompt will be given to confirm removal. You can override -the prompt with \fB\-f\fP. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.BR \-f ", " \-\-force -Force the removal of any logical volumes on the volume group -without confirmation. -To remove also damaged pool volumes use \-ff. -.TP -.BR \-\-noudevsync -Disable udev synchronisation. The -process will not wait for notification from udev. -It will continue irrespective of any possible udev processing -in the background. You should only use this if udev is not running -or has rules that ignore the devices LVM2 creates. -.SH SEE ALSO -.BR lvm (8), -.BR lvremove (8), -.BR vgcreate (8), -.BR vgreduce (8) diff --git a/man/vgrename.8.des b/man/vgrename.8.des new file mode 100644 index 000000000..2384b6bf0 --- /dev/null +++ b/man/vgrename.8.des @@ -0,0 +1,9 @@ +vgrename renames a VG. + +All VGs visible to a system need to have different names, otherwise many +LVM commands will refuse to run or give warning messages. VGs with the +same name can occur when disks are moved between machines, or filters are +changed. If a newly connected disk has a VG with the same name as the VG +containing the root filesystem, the machine may not boot correctly. When +two VGs have the same name, the VG UUID can be used in place of the source +VG name. diff --git a/man/vgrename.8.end b/man/vgrename.8.end new file mode 100644 index 000000000..98eeb532a --- /dev/null +++ b/man/vgrename.8.end @@ -0,0 +1,10 @@ +.SH EXAMPLES + +Rename VG "vg02" to "myvg": +.br +.B vgrename "vg02" "myvg" + +Rename the VG with the specified UUID to "myvg". +.br +.B vgrename Zvlifi\-Ep3t\-e0Ng\-U42h\-o0ye\-KHu1\-nl7Ns4 myvg + diff --git a/man/vgrename.8.in b/man/vgrename.8.in deleted file mode 100644 index 322d740ad..000000000 --- a/man/vgrename.8.in +++ /dev/null @@ -1,58 +0,0 @@ -.TH VGRENAME 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgrename \(em rename a volume group -.SH SYNOPSIS -.B vgrename -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.IR OldVolumeGroup { Path | Name | UUID } -.IR NewVolumeGroup { Path | Name } -.SH DESCRIPTION -vgrename renames an existing (see -.BR vgcreate (8)) -volume group from -.IR OldVolumeGroup { Name | Path | UUID } -to -.IR NewVolumeGroup { Name | Path }. - -All the Volume Groups visible to a system need to have different -names. Otherwise many LVM2 commands will refuse to run or give -warning messages. - -This situation could arise when disks are moved between machines. If -a disk is connected and it contains a Volume Group with the same name -as the Volume Group containing your root filesystem the machine might -not even boot correctly. However, the two Volume Groups should have -different UUIDs (unless the disk was cloned) so you can rename -one of the conflicting Volume Groups with -\fBvgrename\fP. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.SH Examples -Renames existing volume group vg02 to my_volume_group: -.sp -.B vgrename /dev/vg02 /dev/my_volume_group - -or -.sp -.B vgrename vg02 my_volume_group - -Changes the name of the Volume Group with UUID -.br -Zvlifi-Ep3t-e0Ng-U42h-o0ye-KHu1-nl7Ns4 to VolGroup00_tmp: -.sp -.B vgrename Zvlifi\-Ep3t\-e0Ng\-U42h\-o0ye\-KHu1\-nl7Ns4 VolGroup00_tmp - -.SH SEE ALSO -.BR lvm (8), -.BR vgchange (8), -.BR vgcreate (8), -.BR lvrename (8) diff --git a/man/vgs.8.des b/man/vgs.8.des new file mode 100644 index 000000000..15bdb9749 --- /dev/null +++ b/man/vgs.8.des @@ -0,0 +1 @@ +vgs produces formatted output about VGs. diff --git a/man/vgs.8.end b/man/vgs.8.end new file mode 100644 index 000000000..b8cda2643 --- /dev/null +++ b/man/vgs.8.end @@ -0,0 +1,17 @@ +.SH NOTES +. +The vg_attr bits are: +.IP 1 3 +Permissions: (w)riteable, (r)ead-only +.IP 2 3 +Resi(z)eable +.IP 3 3 +E(x)ported +.IP 4 3 +(p)artial: one or more physical volumes belonging to the volume group +are missing from the system +.IP 5 3 +Allocation policy: (c)ontiguous, c(l)ing, (n)ormal, (a)nywhere +.IP 6 3 +(c)lustered, (s)hared + diff --git a/man/vgs.8.in b/man/vgs.8.in deleted file mode 100644 index 080086c40..000000000 --- a/man/vgs.8.in +++ /dev/null @@ -1,161 +0,0 @@ -.TH VGS 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgs \(em report information about volume groups -.SH SYNOPSIS -.B vgs -.RB [ \-a | \-\-all ] -.RB [ \-\-aligned ] -.RB [ \-\-binary ] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [[ \-\-configreport -.IR ReportName ] -.RB [ \-o | \-\-options -.RI [ + | \- | # ] Field1 [, Field2 ...] -.RB [ \-O | \-\-sort -.RI [ + | \- ] Key1 [, Key2 ...]] -.RB [ \-S | \-\-select -.IR Selection ] -.RB ...] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-ignoreskippedcluster ] -.RB [ \-\-logonly ] -.RB [ \-\-nameprefixes ] -.RB [ \-\-noheadings ] -.RB [ \-\-nosuffix ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-\-rows ] -.RB [ \-\-separator -.IR Separator ] -.RB [ \-\-unbuffered ] -.RB [ \-\-units -.IR hHbBsSkKmMgGtTpPeE ] -.RB [ \-\-unquoted ] -.RB [ \-v | \-\-verbose ] -.RB [ \-\-version ] -.RI [ VolumeGroupName -.RI [ VolumeGroupName ...]] -.SH DESCRIPTION -vgs produces formatted output about volume groups. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.B \-\-all -List all volume groups. Equivalent to not specifying any volume groups. -.TP -.B \-\-aligned -Use with \fB\-\-separator\fP to align the output columns. -.TP -.B \-\-binary -Use binary values "0" or "1" instead of descriptive literal values -for columns that have exactly two valid values to report (not counting -the "unknown" value which denotes that the value could not be determined). -.TP -.B \-\-configreport \fI ReportName -Make any subsequent \fB\-o, \-\-options\fP, \fB\-O, \-\-sort\fP or -\fB\-S, \-\-select\fP to apply for \fIReportName\fP where \fIReportName\fP -is either 'vg' for command's main report or 'log' for log report. -If \fB\-\-configreport\fP option is not used to identify a report, then -command's main report is assumed. The log report is available only if -enabled by \fBlog/report_command_log\fP \fBlvm.conf\fP(5) setting or -if \fB\-\-logonly\fP option is used. -.TP -.B \-\-logonly -Suppress the vgs report itself and display only log report on output. -.TP -.B \-\-nameprefixes -Add an "LVM2_" prefix plus the field name to the output. Useful -with \fB\-\-noheadings\fP to produce a list of field=value pairs that can -be used to set environment variables (for example, in \fBudev\fP(7) rules). -.TP -.B \-\-noheadings -Suppress the headings line that is normally the first line of output. -Useful if grepping the output. -.TP -.B \-\-nosuffix -Suppress the suffix on output sizes. Use with \fB\-\-units\fP -(except h and H) if processing the output. -.TP -.BR \-o ", " \-\-options -Comma-separated ordered list of columns. -.IP -Precede the list with '\fI+\fP' to append to the current list -of columns, '\fI-\fP' to remove from the current list of columns -or '\fI#\fP' to compact given columns. The \fI\-o\fP option can -be repeated, providing several lists. These lists are evaluated -from left to right. -.IP -Use \fB\-o vg_all\fP to select all volume group columns. -.IP -Use \fB\-o help\fP to view the full list of columns available. -.IP -Column names include: vg_fmt, vg_uuid, vg_name, vg_attr, vg_size, vg_free, -vg_sysid, vg_extent_size, vg_extent_count, vg_free_count, vg_profile, max_lv, -max_pv, pv_count, lv_count, snap_count, vg_seqno, vg_tags, vg_mda_count, -vg_mda_free, and vg_mda_size, vg_mda_used_count. -.IP -Any "vg_" prefixes are optional. Columns mentioned in either \fBpvs\fP(8) -or \fBlvs\fP(8) can also be chosen, but columns cannot be taken from both -at the same time. -.IP -The vg_attr bits are: -.RS -.IP 1 3 -Permissions: (w)riteable, (r)ead-only -.IP 2 3 -Resi(z)eable -.IP 3 3 -E(x)ported -.IP 4 3 -(p)artial: one or more physical volumes belonging to the volume group -are missing from the system -.IP 5 3 -Allocation policy: (c)ontiguous, c(l)ing, (n)ormal, (a)nywhere -.IP 6 3 -(c)lustered, (s)hared -.RE -.TP -.BR \-O ", " \-\-sort -Comma-separated ordered list of columns to sort by. Replaces the default -selection. Precede any column with '\fI\-\fP' for a reverse sort on that -column. -.TP -.B \-\-rows -Output columns as rows. -.TP -.BR \-S ", " \-\-select " " \fISelection -Display only rows that match Selection criteria. All rows are displayed with -the additional "selected" column (\fB-o selected\fP) showing 1 if the row -matches the Selection and 0 otherwise. The Selection criteria are defined -by specifying column names and their valid values (that can include reserved -values) while making use of supported comparison operators. See \fBlvm\fP(8) -and \fB\-S\fP, \fB\-\-select\fP description for more detailed information -about constructing the Selection criteria. As a quick help and to see full -list of column names that can be used in Selection including the list of -reserved values and the set of supported selection operators, check the -output of \fBvgs -S help\fP command. -.TP -.B \-\-separator \fISeparator -String to use to separate each column. Useful if grepping the output. -.TP -.B \-\-unbuffered -Produce output immediately without sorting or aligning the columns properly. -.TP -.B \-\-units \fIhHbBsSkKmMgGtTpPeE -All sizes are output in these units: (h)uman-readable, (b)ytes, (s)ectors, -(k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (p)etabytes, (e)xabytes. -Capitalise to use multiples of 1000 (S.I.) instead of 1024. Can also specify -custom units e.g. \-\-units 3M -.TP -.B \-\-unquoted -When used with \fB\-\-nameprefixes\fP, output values in the field=value -pairs are not quoted. -.SH SEE ALSO -.BR lvm (8), -.BR vgdisplay (8), -.BR pvs (8), -.BR lvs (8) diff --git a/man/vgscan.8.des b/man/vgscan.8.des new file mode 100644 index 000000000..e8041ed9e --- /dev/null +++ b/man/vgscan.8.des @@ -0,0 +1 @@ +vgscan scans all supported LVM block devices in the system for VGs. diff --git a/man/vgscan.8.in b/man/vgscan.8.in deleted file mode 100644 index e85d81707..000000000 --- a/man/vgscan.8.in +++ /dev/null @@ -1,43 +0,0 @@ -.TH VGSCAN 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgscan \(em scan all disks for volume groups and rebuild caches -.SH SYNOPSIS -.B vgscan -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-? | \-\-help ] -.RB [ \-\-ignorelockingfailure ] -.RB [ \-\-mknodes ] -.RB [ \-\-notifydbus ] -.RB [ \-P | \-\-partial ] -.RB [ \-\-reportformat -.RB { basic | json }] -.RB [ \-v | \-\-verbose ] -.SH DESCRIPTION -vgscan scans all SCSI, (E)IDE disks, multiple devices and a bunch -of other disk devices in the system looking for LVM physical volumes -and volume groups. Define a filter in \fBlvm.conf\fP(5) to restrict -the scan to avoid a CD ROM, for example. -.LP -In LVM2, vgscans take place automatically; but you might still need to -run one explicitly after changing hardware. -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.TP -.B \-\-mknodes -Also checks the LVM special files in /dev that are needed for active -logical volumes and creates any missing ones and removes unused ones. -.TP -.B \-\-notifydbus -Send a notification to D-Bus. The command will exit with an error -if LVM is not built with support for D-Bus notification, or if the -notify_dbus config setting is disabled. -.TP -.B \-\-cache -Scan devices for LVM physical volumes and volume groups and instruct -the lvmetad daemon to update its cached state accordingly. -.SH SEE ALSO -.BR lvm (8), -.BR vgcreate (8), -.BR vgchange (8) diff --git a/man/vgsplit.8.des b/man/vgsplit.8.des new file mode 100644 index 000000000..29eb5c5cb --- /dev/null +++ b/man/vgsplit.8.des @@ -0,0 +1,13 @@ +vgsplit moves one or more PVs from a source VG to a destination VG. The +PVs can be specified explicitly or implicitly by naming an LV, in which +case on PVs underlying the LV are moved. + +If the destination VG does not exist, a new VG is created (command options +can be used to specify properties of the new VG, also see +\fBvgcreate\fP(8).) + +LVs cannot be split between VGs; each LV must be entirely on the PVs in +the source or destination VG. + +vgsplit can only move complete PVs. (See \fBpvmove\fP(8) for moving part +of a PV.) diff --git a/man/vgsplit.8.in b/man/vgsplit.8.in deleted file mode 100644 index 5939ed587..000000000 --- a/man/vgsplit.8.in +++ /dev/null @@ -1,80 +0,0 @@ -.TH VGSPLIT 8 "LVM TOOLS #VERSION#" "Sistina Software UK" \" -*- nroff -*- -.SH NAME -vgsplit \(em split a volume group into two -.SH SYNOPSIS -.B vgsplit -.RB [ \-\-alloc -.IR AllocationPolicy ] -.RB [ \-A | \-\-autobackup -.RI { y | n }] -.RB [ \-c | \-\-clustered -.RI { y | n }] -.RB [ \-\-commandprofile -.IR ProfileName ] -.RB [ \-d | \-\-debug ] -.RB [ \-h | \-\-help ] -.RB [ \-l | \-\-maxlogicalvolumes -.IR MaxLogicalVolumes ] -.RB [ \-M | \-\-metadatatype -.IR type ] -.RB [ \-p | \-\-maxphysicalvolumes -.IR MaxPhysicalVolumes ] -.RB [ \-\- [ vg ] metadatacopies -.IR NumberOfCopies | unmanaged | all ] -.RB [ \-n | \-\-name -.IR LogicalVolumeName ] -.RB [ \-t | \-\-test ] -.RB [ \-v | \-\-verbose ] -.I SourceVolumeGroupName DestinationVolumeGroupName -.RI [ PhysicalVolumePath ...] -.SH DESCRIPTION -vgsplit moves one or more physical volumes from -\fISourceVolumeGroupName\fP into \fIDestinationVolumeGroupName\fP. -The physical volumes moved can be specified either explicitly via -\fIPhysicalVolumePath\fP, or implicitly by \fB\-n\fP -\fILogicalVolumeName\fP, in which case only physical volumes -underlying the specified logical volume will be moved. - -If \fIDestinationVolumeGroupName\fP does not exist, a new volume -group will be created. The default attributes -for the new volume group can be specified with -.BR \-\-alloc , -.BR \-\-clustered , -.BR \-\-maxlogicalvolumes , -.BR \-\-metadatatype , -.B \-\-maxphysicalvolumes \fRand -.BR \-\- [ vg ] metadatacopies -(see \fBvgcreate\fP(8) for a description of these options). If any -of these options are not given, default attribute(s) are taken from -\fISourceVolumeGroupName\fP. If a non-LVM2 metadata type (e.g. lvm1) is -being used, you should use the \fB\-M\fP option to specify the metadata -type directly. - -If -.I DestinationVolumeGroupName -does exist, it will be checked for compatibility with -.I SourceVolumeGroupName -before the physical volumes are moved. Specifying any of the above default -volume group attributes with an existing destination volume group is an error, -and no split will occur. - -Logical volumes cannot be split between volume groups. \fBvgsplit\fP(8) only -moves complete physical volumes: To move part of a physical volume, use -\fBpvmove\fP(8). Each existing logical volume must be entirely on the physical -volumes forming either the source or the destination volume group. For this -reason, \fBvgsplit\fP(8) may fail with an error if a split would result in a -logical volume being split across volume groups. - -A vgsplit into an existing volume group retains the existing volume group's -value of \fPvgmetadatacopies\fP (see \fBvgcreate\fP(8) and \fBlvm.conf\fP(5) for further -explanation of \fPvgmetadatacopies\fP). To change the value of -\fBvgmetadatacopies\fP, use \fBvgchange\fP(8). - -.SH OPTIONS -See \fBlvm\fP(8) for common options. -.SH SEE ALSO -.BR lvm (8), -.BR vgcreate (8), -.BR vgextend (8), -.BR vgreduce (8), -.BR vgmerge (8) diff --git a/tools/Makefile.in b/tools/Makefile.in index 1761be409..5aaba2ff2 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -1,4 +1,3 @@ - # # Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved. # Copyright (C) 2004-2012 Red Hat, Inc. All rights reserved.