1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00

make: generate config update

This commit is contained in:
Zdenek Kabelac 2018-11-29 23:08:05 +01:00 committed by David Teigland
parent 72aa4941af
commit 9f705a7a64

View File

@ -149,18 +149,6 @@ devices {
# This configuration option has an automatic default value.
# global_filter = [ "a|.*/|" ]
# Configuration option devices/cache_dir.
# This setting is no longer used.
cache_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
# Configuration option devices/cache_file_prefix.
# This setting is no longer used.
cache_file_prefix = ""
# Configuration option devices/write_cache_state.
# This setting is no longer used.
write_cache_state = 1
# Configuration option devices/types.
# List of additional acceptable block device types.
# These are of device type names from /proc/devices, followed by the
@ -197,19 +185,24 @@ devices {
fw_raid_component_detection = 0
# Configuration option devices/md_chunk_alignment.
# Align PV data blocks with md device's stripe-width.
# Align the start of a PV data area with md device's stripe-width.
# This applies if a PV is placed directly on an md device.
# default_data_alignment will be overriden if it is not aligned
# with the value detected for this setting.
# This setting is overriden by data_alignment_detection,
# data_alignment, and the --dataalignment option.
md_chunk_alignment = 1
# Configuration option devices/default_data_alignment.
# Default alignment of the start of a PV data area in MB.
# If set to 0, a value of 64KiB will be used.
# Set to 1 for 1MiB, 2 for 2MiB, etc.
# Align the start of a PV data area with this number of MiB.
# Set to 1 for 1MiB, 2 for 2MiB, etc. Set to 0 to disable.
# This setting is overriden by data_alignment and the --dataalignment
# option.
# This configuration option has an automatic default value.
# default_data_alignment = 1
# Configuration option devices/data_alignment_detection.
# Detect PV data alignment based on sysfs device information.
# Align the start of a PV data area with sysfs io properties.
# The start of a PV data area will be a multiple of minimum_io_size or
# optimal_io_size exposed in sysfs. minimum_io_size is the smallest
# request the device can perform without incurring a read-modify-write
@ -217,27 +210,29 @@ devices {
# preferred unit of receiving I/O, e.g. MD stripe width.
# minimum_io_size is used if optimal_io_size is undefined (0).
# If md_chunk_alignment is enabled, that detects the optimal_io_size.
# This setting takes precedence over md_chunk_alignment.
# default_data_alignment and md_chunk_alignment will be overriden
# if they are not aligned with the value detected for this setting.
# This setting is overriden by data_alignment and the --dataalignment
# option.
data_alignment_detection = 1
# Configuration option devices/data_alignment.
# Alignment of the start of a PV data area in KiB.
# If a PV is placed directly on an md device and md_chunk_alignment or
# data_alignment_detection are enabled, then this setting is ignored.
# Otherwise, md_chunk_alignment and data_alignment_detection are
# disabled if this is set. Set to 0 to use the default alignment or the
# page size, if larger.
# Align the start of a PV data area with this number of KiB.
# When non-zero, this setting overrides default_data_alignment.
# Set to 0 to disable, in which case default_data_alignment
# is used to align the first PE in units of MiB.
# This setting is overriden by the --dataalignment option.
data_alignment = 0
# Configuration option devices/data_alignment_offset_detection.
# Detect PV data alignment offset based on sysfs device information.
# The start of a PV aligned data area will be shifted by the
# Shift the start of an aligned PV data area based on sysfs information.
# After a PV data area is aligned, it will be shifted by the
# alignment_offset exposed in sysfs. This offset is often 0, but may
# be non-zero. Certain 4KiB sector drives that compensate for windows
# partitioning will have an alignment_offset of 3584 bytes (sector 7
# is the lowest aligned logical block, the 4KiB sectors start at
# LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
# pvcreate --dataalignmentoffset will skip this detection.
# This setting is overriden by the --dataalignmentoffset option.
data_alignment_offset_detection = 1
# Configuration option devices/ignore_suspended_devices.
@ -265,10 +260,6 @@ devices {
# different way, making them a better choice for VG stacking.
ignore_lvm_mirrors = 1
# Configuration option devices/disable_after_error_count.
# This setting is no longer used.
disable_after_error_count = 0
# Configuration option devices/require_restorefile_with_uuid.
# Allow use of pvcreate --uuid without requiring --restorefile.
require_restorefile_with_uuid = 1
@ -837,20 +828,6 @@ global {
# the error messages.
activation = 1
# Configuration option global/fallback_to_lvm1.
# This setting is no longer used.
# This configuration option has an automatic default value.
# fallback_to_lvm1 = 0
# Configuration option global/format.
# This setting is no longer used.
# This configuration option has an automatic default value.
# format = "lvm2"
# Configuration option global/format_libraries.
# This setting is no longer used.
# This configuration option does not have a default value defined.
# Configuration option global/segment_libraries.
# This configuration option does not have a default value defined.
@ -863,22 +840,10 @@ global {
# Location of /etc system configuration directory.
etc = "@CONFDIR@"
# Configuration option global/locking_type.
# This setting is no longer used.
locking_type = 1
# Configuration option global/wait_for_locks.
# When disabled, fail if a lock request would block.
wait_for_locks = 1
# Configuration option global/fallback_to_clustered_locking.
# This setting is no longer used.
fallback_to_clustered_locking = 1
# Configuration option global/fallback_to_local_locking.
# This setting is no longer used.
fallback_to_local_locking = 1
# Configuration option global/locking_dir.
# Directory to use for LVM command file locks.
# Local non-LV directory that holds file-based locks while commands are
@ -899,11 +864,6 @@ global {
# Search this directory first for shared libraries.
# This configuration option does not have a default value defined.
# Configuration option global/locking_library.
# This setting is no longer used.
# This configuration option has an automatic default value.
# locking_library = "liblvm2clusterlock.so"
# Configuration option global/abort_on_internal_errors.
# Abort a command that encounters an internal error.
# Treat any internal errors as fatal errors, aborting the process that
@ -992,14 +952,20 @@ global {
# This configuration option has an automatic default value.
# lvdisplay_shows_full_device_path = 0
# Configuration option global/use_lvmetad.
# This setting is no longer used.
use_lvmetad = 0
# Configuration option global/event_activation.
# Activate LVs based on system-generated device events.
# When a device appears on the system, a system-generated event runs
# the pvscan command to activate LVs if the new PV completes the VG.
# Use auto_activation_volume_list to select which LVs should be
# activated from these events (the default is all.)
# When event_activation is disabled, the system will generally run
# a direct activation command to activate LVs in complete VGs.
event_activation = 1
# Configuration option global/lvmetad_update_wait_time.
# This setting is no longer used.
# Configuration option global/use_aio.
# Use async I/O when reading and writing devices.
# This configuration option has an automatic default value.
# lvmetad_update_wait_time = 0
# use_aio = 1
# Configuration option global/use_lvmlockd.
# Use lvmlockd for locking among hosts using LVM on shared storage.
@ -1681,13 +1647,20 @@ activation {
# vgmetadatacopies = 0
# Configuration option metadata/pvmetadatasize.
# Approximate number of sectors to use for each metadata copy.
# VGs with large numbers of PVs or LVs, or VGs containing complex LV
# structures, may need additional space for VG metadata. The metadata
# areas are treated as circular buffers, so unused space becomes filled
# with an archive of the most recent previous versions of the metadata.
# The default size of the metadata area in units of 512 byte sectors.
# The metadata area begins at an offset of the page size from the start
# of the device. The first PE is by default at 1 MiB from the start of
# the device. The space between these is the default metadata area size.
# The actual size of the metadata area may be larger than what is set
# here due to default_data_alignment making the first PE a MiB multiple.
# The metadata area begins with a 512 byte header and is followed by a
# circular buffer used for VG metadata text. The maximum size of the VG
# metadata is about half the size of the metadata buffer. VGs with large
# numbers of PVs or LVs, or VGs containing complex LV structures, may need
# additional space for VG metadata. The --metadatasize option overrides
# this setting.
# This configuration option does not have a default value defined.
# This configuration option has an automatic default value.
# pvmetadatasize = 255
# Configuration option metadata/pvmetadataignore.
# Ignore metadata areas on a new PV.
@ -1702,11 +1675,6 @@ activation {
# This configuration option is advanced.
# This configuration option has an automatic default value.
# stripesize = 64
# Configuration option metadata/dirs.
# This setting is no longer used.
# This configuration option is advanced.
# This configuration option does not have a default value defined.
# }
# Configuration section report.