make: generate

conf/example.conf.in

@@ -33,15 +33,18 @@ config {
 	# any configuration mismatch is ignored and the default value is used
 	# without any warning (a message about the configuration key not being
 	# found is issued in verbose mode only).
-	checks = 1
+	# This configuration option has an automatic default value.
+	# checks = 1
 
 	# Configuration option config/abort_on_errors.
 	# Abort the LVM process if a configuration mismatch is found.
-	abort_on_errors = 0
+	# This configuration option has an automatic default value.
+	# abort_on_errors = 0
 
 	# Configuration option config/profile_dir.
 	# Directory where LVM looks for configuration profiles.
-	profile_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@"
+	# This configuration option has an automatic default value.
+	# profile_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@"
 }
 
 # Configuration section devices.
@@ -52,12 +55,14 @@ devices {
 	# Directory in which to create volume group device nodes.
 	# Commands also accept this as a prefix on volume group names.
 	# This configuration option is advanced.
-	dir = "/dev"
+	# This configuration option has an automatic default value.
+	# dir = "/dev"
 
 	# Configuration option devices/scan.
 	# Directories containing device nodes to use with LVM.
 	# This configuration option is advanced.
-	scan = [ "/dev" ]
+	# This configuration option has an automatic default value.
+	# scan = [ "/dev" ]
 
 	# Configuration option devices/obtain_device_list_from_udev.
 	# Obtain the list of available devices from udev.
@@ -67,7 +72,8 @@ devices {
 	# setting applies only to the udev-managed device directory; other
 	# directories will be scanned fully. LVM needs to be compiled with
 	# udev support for this setting to apply.
-	obtain_device_list_from_udev = 1
+	# This configuration option has an automatic default value.
+	# obtain_device_list_from_udev = 1
 
 	# Configuration option devices/external_device_info_source.
 	# Select an external device information source.
@@ -86,7 +92,8 @@ devices {
 	#     Reuse existing udev database records. Applicable only if LVM is
 	#     compiled with udev support.
 	#
-	external_device_info_source = "none"
+	# This configuration option has an automatic default value.
+	# external_device_info_source = "none"
 
 	# Configuration option devices/hints.
 	# Use a local file to remember which devices have PVs on them.
@@ -131,7 +138,7 @@ devices {
 	# be used, regardless of this setting, when the --devicesfile
 	# option is set to a specific file name.
 	# This configuration option has an automatic default value.
-	# use_devicesfile = 0
+	# use_devicesfile = 1
 
 	# Configuration option devices/devicesfile.
 	# The name of the system devices file, listing devices that LVM should use.
@@ -212,7 +219,8 @@ devices {
 	# Restrict device scanning to block devices appearing in sysfs.
 	# This is a quick way of filtering out block devices that are not
 	# present on the system. sysfs must be part of the kernel and mounted.)
-	sysfs_scan = 1
+	# This configuration option has an automatic default value.
+	# sysfs_scan = 1
 
 	# Configuration option devices/scan_lvs.
 	# Scan LVM LVs for layered PVs, allowing LVs to be used as PVs.
@@ -226,11 +234,13 @@ devices {
 	# use PVs that exist on LVs, and will not allow a PV to be created on
 	# an LV. The LVs are ignored using a built in device filter that
 	# identifies and excludes LVs.
-	scan_lvs = 0
+	# This configuration option has an automatic default value.
+	# scan_lvs = 0
 
 	# Configuration option devices/multipath_component_detection.
 	# Ignore devices that are components of DM multipath devices.
-	multipath_component_detection = 1
+	# This configuration option has an automatic default value.
+	# multipath_component_detection = 1
 
 	# Configuration option devices/md_component_detection.
 	# Enable detection and exclusion of MD component devices.
@@ -241,7 +251,8 @@ devices {
 	# In cases where the MD superblock is located at the end of the
 	# component devices, it is more difficult for LVM to consistently
 	# identify an MD component, see the md_component_checks setting.
-	md_component_detection = 1
+	# This configuration option has an automatic default value.
+	# md_component_detection = 1
 
 	# Configuration option devices/md_component_checks.
 	# The checks LVM should use to detect MD component devices.
@@ -265,7 +276,8 @@ devices {
 	# Ignore devices that are components of firmware RAID devices.
 	# LVM must use an external_device_info_source other than none for this
 	# detection to execute.
-	fw_raid_component_detection = 0
+	# This configuration option has an automatic default value.
+	# fw_raid_component_detection = 0
 
 	# Configuration option devices/md_chunk_alignment.
 	# Align the start of a PV data area with md device's stripe-width.
@@ -274,7 +286,8 @@ devices {
 	# with the value detected for this setting.
 	# This setting is overridden by data_alignment_detection,
 	# data_alignment, and the --dataalignment option.
-	md_chunk_alignment = 1
+	# This configuration option has an automatic default value.
+	# md_chunk_alignment = 1
 
 	# Configuration option devices/default_data_alignment.
 	# Align the start of a PV data area with this number of MiB.
@@ -297,7 +310,8 @@ devices {
 	# if they are not aligned with the value detected for this setting.
 	# This setting is overridden by data_alignment and the --dataalignment
 	# option.
-	data_alignment_detection = 1
+	# This configuration option has an automatic default value.
+	# data_alignment_detection = 1
 
 	# Configuration option devices/data_alignment.
 	# Align the start of a PV data area with this number of KiB.
@@ -305,7 +319,8 @@ devices {
 	# Set to 0 to disable, in which case default_data_alignment
 	# is used to align the first PE in units of MiB.
 	# This setting is overridden by the --dataalignment option.
-	data_alignment = 0
+	# This configuration option has an automatic default value.
+	# data_alignment = 0
 
 	# Configuration option devices/data_alignment_offset_detection.
 	# Shift the start of an aligned PV data area based on sysfs information.
@@ -316,13 +331,15 @@ devices {
 	# is the lowest aligned logical block, the 4KiB sectors start at
 	# LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
 	# This setting is overridden by the --dataalignmentoffset option.
-	data_alignment_offset_detection = 1
+	# This configuration option has an automatic default value.
+	# data_alignment_offset_detection = 1
 
 	# Configuration option devices/ignore_suspended_devices.
 	# Ignore DM devices that have I/O suspended while scanning devices.
 	# Otherwise, LVM waits for a suspended device to become accessible.
 	# This should only be needed in recovery situations.
-	ignore_suspended_devices = 0
+	# This configuration option has an automatic default value.
+	# ignore_suspended_devices = 0
 
 	# Configuration option devices/ignore_lvm_mirrors.
 	# Do not scan 'mirror' LVs to avoid possible deadlocks.
@@ -341,18 +358,21 @@ devices {
 	# a scan of the mirror's labels. The 'mirror' scanning problems do not
 	# apply to LVM RAID types like 'raid1' which handle failures in a
 	# different way, making them a better choice for VG stacking.
-	ignore_lvm_mirrors = 1
+	# This configuration option has an automatic default value.
+	# ignore_lvm_mirrors = 1
 
 	# Configuration option devices/require_restorefile_with_uuid.
 	# Allow use of pvcreate --uuid without requiring --restorefile.
-	require_restorefile_with_uuid = 1
+	# This configuration option has an automatic default value.
+	# require_restorefile_with_uuid = 1
 
 	# Configuration option devices/pv_min_size.
 	# Minimum size in KiB of block devices which can be used as PVs.
 	# In a clustered environment all nodes must use the same value.
 	# Any value smaller than 512KiB is ignored. The previous built-in
 	# value was 512.
-	pv_min_size = 2048
+	# This configuration option has an automatic default value.
+	# pv_min_size = 2048
 
 	# Configuration option devices/issue_discards.
 	# Issue discards to PVs that are no longer used by an LV.
@@ -365,7 +385,8 @@ devices {
 	# benefit from discards, but SSDs and thinly provisioned LUNs
 	# generally do. If enabled, discards will only be issued if both the
 	# storage and kernel provide support.
-	issue_discards = 0
+	# This configuration option has an automatic default value.
+	# issue_discards = 0
 
 	# Configuration option devices/allow_changes_with_duplicate_pvs.
 	# Allow VG modification while a PV appears on multiple devices.
@@ -378,13 +399,15 @@ devices {
 	# or activating LVs in it while a PV appears on multiple devices.
 	# Enabling this setting allows the VG to be used as usual even with
 	# uncertain devices.
-	allow_changes_with_duplicate_pvs = 0
+	# This configuration option has an automatic default value.
+	# allow_changes_with_duplicate_pvs = 0
 
 	# Configuration option devices/allow_mixed_block_sizes.
 	# Allow PVs in the same VG with different logical block sizes.
 	# When allowed, the user is responsible to ensure that an LV is
 	# using PVs with matching block sizes when necessary.
-	allow_mixed_block_sizes = 0
+	# This configuration option has an automatic default value.
+	# allow_mixed_block_sizes = 0
 }
 
 # Configuration section allocation.
@@ -416,7 +439,8 @@ allocation {
 	# policies to detect more situations where data can be grouped onto
 	# the same disks. This setting can be used to disable the changes
 	# and revert to the previous algorithm.
-	maximise_cling = 1
+	# This configuration option has an automatic default value.
+	# maximise_cling = 1
 
 	# Configuration option allocation/use_blkid_wiping.
 	# Use blkid to detect and erase existing signatures on new PVs and LVs.
@@ -426,7 +450,8 @@ allocation {
 	# code is currently able to recognize: MD device signatures,
 	# swap signature, and LUKS signatures. To see the list of signatures
 	# recognized by blkid, check the output of the 'blkid -k' command.
-	use_blkid_wiping = @DEFAULT_USE_BLKID_WIPING@
+	# This configuration option has an automatic default value.
+	# use_blkid_wiping = @DEFAULT_USE_BLKID_WIPING@
 
 	# Configuration option allocation/wipe_signatures_when_zeroing_new_lvs.
 	# Look for and erase any signatures while zeroing a new LV.
@@ -443,12 +468,14 @@ allocation {
 	# use_blkid_wiping.) Wiping each detected signature must be confirmed.
 	# When this setting is disabled, signatures on new LVs are not detected
 	# or erased unless the --wipesignatures option is used directly.
-	wipe_signatures_when_zeroing_new_lvs = 1
+	# This configuration option has an automatic default value.
+	# wipe_signatures_when_zeroing_new_lvs = 1
 
 	# Configuration option allocation/mirror_logs_require_separate_pvs.
 	# Mirror logs and images will always use different PVs.
 	# The default setting changed in version 2.02.85.
-	mirror_logs_require_separate_pvs = 0
+	# This configuration option has an automatic default value.
+	# mirror_logs_require_separate_pvs = 0
 
 	# Configuration option allocation/raid_stripe_all_devices.
 	# Stripe across all PVs when RAID stripes are not specified.
@@ -795,7 +822,8 @@ log {
 
 	# Configuration option log/verbose.
 	# Controls the messages sent to stdout or stderr.
-	verbose = 0
+	# This configuration option has an automatic default value.
+	# verbose = 0
 
 	# Configuration option log/silent.
 	# Suppress all non-essential messages from stdout.
@@ -806,25 +834,37 @@ log {
 	# for syslog and lvm2_log_fn purposes.
 	# Any 'yes' or 'no' questions not overridden by other arguments are
 	# suppressed and default to 'no'.
-	silent = 0
+	# This configuration option has an automatic default value.
+	# silent = 0
 
 	# Configuration option log/syslog.
 	# Send log messages through syslog.
-	syslog = 1
+	# This configuration option has an automatic default value.
+	# syslog = 1
 
 	# Configuration option log/file.
 	# Write error and debug log messages to a file specified here.
 	# This configuration option does not have a default value defined.
 
+	# Configuration option log/journal.
+	# Record lvm information in the systemd journal.
+	# command: record commands that are run.
+	# output: record default output from commands.
+	# debug: record debug messages from commands.
+	# This configuration option has an automatic default value.
+	# journal = [ ]
+
 	# Configuration option log/overwrite.
 	# Overwrite the log file each time the program is run.
-	overwrite = 0
+	# This configuration option has an automatic default value.
+	# overwrite = 0
 
 	# Configuration option log/level.
 	# The level of log messages that are sent to the log file or syslog.
 	# There are 6 syslog-like log levels currently in use: 2 to 7 inclusive.
 	# 7 is the most verbose (LOG_DEBUG).
-	level = 0
+	# This configuration option has an automatic default value.
+	# level = 0
 
 	# Configuration option log/indent.
 	# Indent messages according to their severity.
@@ -833,7 +873,8 @@ log {
 
 	# Configuration option log/command_names.
 	# Display the command name on each line of output.
-	command_names = 0
+	# This configuration option has an automatic default value.
+	# command_names = 0
 
 	# Configuration option log/prefix.
 	# A prefix to use before the log message text.
@@ -841,12 +882,14 @@ log {
 	# Two spaces allows you to see/grep the severity of each message.
 	# To make the messages look similar to the original LVM tools use:
 	# indent = 0, command_names = 1, prefix = " -- "
-	prefix = "  "
+	# This configuration option has an automatic default value.
+	# prefix = "  "
 
 	# Configuration option log/activation.
 	# Log messages during activation.
 	# Don't use this in low memory situations (can deadlock).
-	activation = 0
+	# This configuration option has an automatic default value.
+	# activation = 0
 
 	# Configuration option log/debug_classes.
 	# Select log messages by class.
@@ -854,7 +897,8 @@ log {
 	# debug output if the class is listed here. Classes currently
 	# available: memory, devices, io, activation, allocation,
 	# metadata, cache, locking, lvmpolld. Use "all" to see everything.
-	debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ]
+	# This configuration option has an automatic default value.
+	# debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ]
 
 	# Configuration option log/debug_file_fields.
 	# The fields included in debug output written to log file.
@@ -881,30 +925,36 @@ backup {
 	# Configuration option backup/backup.
 	# Maintain a backup of the current metadata configuration.
 	# Think very hard before turning this off!
-	backup = 1
+	# This configuration option has an automatic default value.
+	# backup = 1
 
 	# Configuration option backup/backup_dir.
 	# Location of the metadata backup files.
 	# Remember to back up this directory regularly!
-	backup_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@"
+	# This configuration option has an automatic default value.
+	# backup_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@"
 
 	# Configuration option backup/archive.
 	# Maintain an archive of old metadata configurations.
 	# Think very hard before turning this off.
-	archive = 1
+	# This configuration option has an automatic default value.
+	# archive = 1
 
 	# Configuration option backup/archive_dir.
 	# Location of the metdata archive files.
 	# Remember to back up this directory regularly!
-	archive_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@"
+	# This configuration option has an automatic default value.
+	# archive_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@"
 
 	# Configuration option backup/retain_min.
 	# Minimum number of archives to keep.
-	retain_min = 10
+	# This configuration option has an automatic default value.
+	# retain_min = 10
 
 	# Configuration option backup/retain_days.
 	# Minimum number of days to keep archive files.
-	retain_days = 30
+	# This configuration option has an automatic default value.
+	# retain_days = 30
 }
 
 # Configuration section shell.
@@ -913,7 +963,8 @@ shell {
 
 	# Configuration option shell/history_size.
 	# Number of lines of history to store in ~/.lvm_history.
-	history_size = 100
+	# This configuration option has an automatic default value.
+	# history_size = 100
 }
 
 # Configuration section global.
@@ -923,16 +974,19 @@ global {
 	# Configuration option global/umask.
 	# The file creation mask for any files and directories created.
 	# Interpreted as octal if the first digit is zero.
-	umask = 077
+	# This configuration option has an automatic default value.
+	# umask = 077
 
 	# Configuration option global/test.
 	# No on-disk metadata changes will be made in test mode.
 	# Equivalent to having the -t option on every command.
-	test = 0
+	# This configuration option has an automatic default value.
+	# test = 0
 
 	# Configuration option global/units.
 	# Default value for --units argument.
-	units = "r"
+	# This configuration option has an automatic default value.
+	# units = "r"
 
 	# Configuration option global/si_unit_consistency.
 	# Distinguish between powers of 1024 and 1000 bytes.
@@ -940,13 +994,15 @@ global {
 	# e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB.
 	# If scripts depend on the old behaviour, disable this setting
 	# temporarily until they are updated.
-	si_unit_consistency = 1
+	# This configuration option has an automatic default value.
+	# si_unit_consistency = 1
 
 	# Configuration option global/suffix.
 	# Display unit suffix for sizes.
 	# This setting has no effect if the units are in human-readable form
 	# (global/units = "h") in which case the suffix is always displayed.
-	suffix = 1
+	# This configuration option has an automatic default value.
+	# suffix = 1
 
 	# Configuration option global/activation.
 	# Enable/disable communication with the kernel device-mapper.
@@ -954,26 +1010,31 @@ global {
 	# activating any logical volumes. If the device-mapper driver
 	# is not present in the kernel, disabling this should suppress
 	# the error messages.
-	activation = 1
+	# This configuration option has an automatic default value.
+	# activation = 1
 
 	# Configuration option global/proc.
 	# Location of proc filesystem.
 	# This configuration option is advanced.
-	proc = "/proc"
+	# This configuration option has an automatic default value.
+	# proc = "/proc"
 
 	# Configuration option global/etc.
 	# Location of /etc system configuration directory.
-	etc = "@CONFDIR@"
+	# This configuration option has an automatic default value.
+	# etc = "@CONFDIR@"
 
 	# Configuration option global/wait_for_locks.
 	# When disabled, fail if a lock request would block.
-	wait_for_locks = 1
+	# This configuration option has an automatic default value.
+	# wait_for_locks = 1
 
 	# Configuration option global/locking_dir.
 	# Directory to use for LVM command file locks.
 	# Local non-LV directory that holds file-based locks while commands are
 	# in progress. A directory like /tmp that may get wiped on reboot is OK.
-	locking_dir = "@DEFAULT_LOCK_DIR@"
+	# This configuration option has an automatic default value.
+	# locking_dir = "@DEFAULT_LOCK_DIR@"
 
 	# Configuration option global/prioritise_write_locks.
 	# Allow quicker VG write access during high volume read access.
@@ -982,7 +1043,8 @@ global {
 	# requests immediately, delay them to allow the read-write requests to
 	# be serviced. Without this setting, write access may be stalled by a
 	# high volume of read-only requests. This option only affects file locks.
-	prioritise_write_locks = 1
+	# This configuration option has an automatic default value.
+	# prioritise_write_locks = 1
 
 	# Configuration option global/library_dir.
 	# Search this directory first for shared libraries.
@@ -992,7 +1054,8 @@ global {
 	# Abort a command that encounters an internal error.
 	# Treat any internal errors as fatal errors, aborting the process that
 	# encountered the internal error. Please only enable for debugging.
-	abort_on_internal_errors = 0
+	# This configuration option has an automatic default value.
+	# abort_on_internal_errors = 0
 
 	# Configuration option global/metadata_read_only.
 	# No operations that change on-disk metadata are permitted.
@@ -1000,7 +1063,8 @@ global {
 	# repair will still be allowed to proceed exactly as if the repair had
 	# been performed (except for the unchanged vg_seqno). Inappropriate
 	# use could mess up your system, so seek advice first!
-	metadata_read_only = 0
+	# This configuration option has an automatic default value.
+	# metadata_read_only = 0
 
 	# Configuration option global/mirror_segtype_default.
 	# The segment type used by the short mirroring option -m.
@@ -1026,7 +1090,8 @@ global {
 	#     cluster-aware and cannot be used in a shared (active/active)
 	#     fashion in a cluster.
 	#
-	mirror_segtype_default = "@DEFAULT_MIRROR_SEGTYPE@"
+	# This configuration option has an automatic default value.
+	# mirror_segtype_default = "@DEFAULT_MIRROR_SEGTYPE@"
 
 	# Configuration option global/support_mirrored_mirror_log.
 	# Enable mirrored 'mirror' log type for testing.
@@ -1056,7 +1121,8 @@ global {
 	#     effectively creating a RAID 0+1 array. The layering is suboptimal
 	#     in terms of providing redundancy and performance.
 	#
-	raid10_segtype_default = "@DEFAULT_RAID10_SEGTYPE@"
+	# This configuration option has an automatic default value.
+	# raid10_segtype_default = "@DEFAULT_RAID10_SEGTYPE@"
 
 	# Configuration option global/sparse_segtype_default.
 	# The segment type used by the -V -L combination.
@@ -1076,7 +1142,8 @@ global {
 	#     metadata. It has better performance, especially when more data
 	#     is used. It also supports full snapshots.
 	#
-	sparse_segtype_default = "@DEFAULT_SPARSE_SEGTYPE@"
+	# This configuration option has an automatic default value.
+	# sparse_segtype_default = "@DEFAULT_SPARSE_SEGTYPE@"
 
 	# Configuration option global/lvdisplay_shows_full_device_path.
 	# Enable this to reinstate the previous lvdisplay name format.
@@ -1111,7 +1178,8 @@ global {
 	# Applicable only if LVM is compiled with lockd support in which
 	# case there is also lvmlockd(8) man page available for more
 	# information.
-	use_lvmlockd = 0
+	# This configuration option has an automatic default value.
+	# use_lvmlockd = 0
 
 	# Configuration option global/lvmlockd_lock_retries.
 	# Retry lvmlockd lock requests this many times.
@@ -1284,15 +1352,18 @@ global {
 	#   uname
 	#     Set the system ID from the hostname (uname) of the system.
 	#     System IDs beginning localhost are not permitted.
+	#   appmachineid
+	#     Use an LVM-specific derivation of the local machine-id as the
+	#     system ID. See 'man machine-id'.
 	#   machineid
-	#     Use the contents of the machine-id file to set the system ID.
+	#     Use the contents of the machine-id file to set the system ID
-	#     Some systems create this file at installation time.
+	#     (appmachineid is recommended.)
-	#     See 'man machine-id' and global/etc.
 	#   file
 	#     Use the contents of another file (system_id_file) to set the
 	#     system ID.
 	#
-	system_id_source = "none"
+	# This configuration option has an automatic default value.
+	# system_id_source = "none"
 
 	# Configuration option global/system_id_file.
 	# The full path to the file containing a system ID.
@@ -1312,13 +1383,15 @@ global {
 	# and to use its own control group. When this option is disabled, LVM
 	# commands will supervise long running operations by forking themselves.
 	# Applicable only if LVM is compiled with lvmpolld support.
-	use_lvmpolld = @DEFAULT_USE_LVMPOLLD@
+	# This configuration option has an automatic default value.
+	# use_lvmpolld = @DEFAULT_USE_LVMPOLLD@
 
 	# Configuration option global/notify_dbus.
 	# Enable D-Bus notification from LVM commands.
 	# When enabled, an LVM command that changes PVs, changes VG metadata,
 	# or changes the activation state of an LV will send a notification.
-	notify_dbus = 1
+	# This configuration option has an automatic default value.
+	# notify_dbus = 1
 
 	# Configuration option global/io_memory_size.
 	# The amount of memory in KiB that LVM allocates to perform disk io.
@@ -1339,7 +1412,8 @@ activation {
 	# Useful for debugging problems with activation. Some of the checks may
 	# be expensive, so it's best to use this only when there seems to be a
 	# problem.
-	checks = 0
+	# This configuration option has an automatic default value.
+	# checks = 0
 
 	# Configuration option activation/udev_sync.
 	# Use udev notifications to synchronize udev and LVM.
@@ -1350,14 +1424,16 @@ activation {
 	# that ignore the devices LVM creates. If enabled when udev is not
 	# running, and LVM processes are waiting for udev, run the command
 	# 'dmsetup udevcomplete_all' to wake them up.
-	udev_sync = 1
+	# This configuration option has an automatic default value.
+	# udev_sync = 1
 
 	# Configuration option activation/udev_rules.
 	# Use udev rules to manage LV device nodes and symlinks.
 	# When disabled, LVM will manage the device nodes and symlinks for
 	# active LVs itself. Manual intervention may be required if this
 	# setting is changed while LVs are active.
-	udev_rules = 1
+	# This configuration option has an automatic default value.
+	# udev_rules = 1
 
 	# Configuration option activation/verify_udev_operations.
 	# Use extra checks in LVM to verify udev operations.
@@ -1372,7 +1448,8 @@ activation {
 	# If LV deactivation fails, LVM will retry for a few seconds before
 	# failing. This may happen because a process run from a quick udev rule
 	# temporarily opened the device.
-	retry_deactivation = 1
+	# This configuration option has an automatic default value.
+	# retry_deactivation = 1
 
 	# Configuration option activation/missing_stripe_filler.
 	# Method to fill missing stripes when activating an incomplete LV.
@@ -1383,7 +1460,8 @@ activation {
 	# other than 'error' with mirrored or snapshotted volumes is likely to
 	# result in data corruption.
 	# This configuration option is advanced.
-	missing_stripe_filler = "error"
+	# This configuration option has an automatic default value.
+	# missing_stripe_filler = "error"
 
 	# Configuration option activation/use_linear_target.
 	# Use the linear target to optimize single stripe LVs.
@@ -1505,7 +1583,8 @@ activation {
 	# The clean/dirty state of data is tracked for each region.
 	# The value is rounded down to a power of two if necessary, and
 	# is ignored if it is not a multiple of the machine memory page size.
-	raid_region_size = 2048
+	# This configuration option has an automatic default value.
+	# raid_region_size = 2048
 
 	# Configuration option activation/error_when_full.
 	# Return errors if a thin pool runs out of space.
@@ -1550,7 +1629,8 @@ activation {
 	#     Attempt to use any extra physical volumes in the VG as spares and
 	#     replace faulty devices.
 	#
-	raid_fault_policy = "warn"
+	# This configuration option has an automatic default value.
+	# raid_fault_policy = "warn"
 
 	# Configuration option activation/mirror_image_fault_policy.
 	# Defines how a device failure in a 'mirror' LV is handled.
@@ -1587,13 +1667,15 @@ activation {
 	#     'remove' if no suitable device and space can be allocated for the
 	#     replacement.
 	#
-	mirror_image_fault_policy = "remove"
+	# This configuration option has an automatic default value.
+	# mirror_image_fault_policy = "remove"
 
 	# Configuration option activation/mirror_log_fault_policy.
 	# Defines how a device failure in a 'mirror' log LV is handled.
 	# The mirror_image_fault_policy description for mirrored LVs also
 	# applies to mirrored log LVs.
-	mirror_log_fault_policy = "allocate"
+	# This configuration option has an automatic default value.
+	# mirror_log_fault_policy = "allocate"
 
 	# Configuration option activation/snapshot_autoextend_threshold.
 	# Auto-extend a snapshot when its usage exceeds this percent.
@@ -1608,7 +1690,8 @@ activation {
 	# 840M, it is extended to 1.44G:
 	# snapshot_autoextend_threshold = 70
 	#
-	snapshot_autoextend_threshold = 100
+	# This configuration option has an automatic default value.
+	# snapshot_autoextend_threshold = 100
 
 	# Configuration option activation/snapshot_autoextend_percent.
 	# Auto-extending a snapshot adds this percent extra space.
@@ -1621,7 +1704,8 @@ activation {
 	# 840M, it is extended to 1.44G:
 	# snapshot_autoextend_percent = 20
 	#
-	snapshot_autoextend_percent = 20
+	# This configuration option has an automatic default value.
+	# snapshot_autoextend_percent = 20
 
 	# Configuration option activation/thin_pool_autoextend_threshold.
 	# Auto-extend a thin pool when its usage exceeds this percent.
@@ -1636,7 +1720,8 @@ activation {
 	# 840M, it is extended to 1.44G:
 	# thin_pool_autoextend_threshold = 70
 	#
-	thin_pool_autoextend_threshold = 100
+	# This configuration option has an automatic default value.
+	# thin_pool_autoextend_threshold = 100
 
 	# Configuration option activation/thin_pool_autoextend_percent.
 	# Auto-extending a thin pool adds this percent extra space.
@@ -1649,7 +1734,8 @@ activation {
 	# 840M, it is extended to 1.44G:
 	# thin_pool_autoextend_percent = 20
 	#
-	thin_pool_autoextend_percent = 20
+	# This configuration option has an automatic default value.
+	# thin_pool_autoextend_percent = 20
 
 	# Configuration option activation/vdo_pool_autoextend_threshold.
 	# Auto-extend a VDO pool when its usage exceeds this percent.
@@ -1708,7 +1794,8 @@ activation {
 	# Monitor LVs that are activated.
 	# The --ignoremonitoring option overrides this setting.
 	# When enabled, LVM will ask dmeventd to monitor activated LVs.
-	monitoring = 1
+	# This configuration option has an automatic default value.
+	# monitoring = 1
 
 	# Configuration option activation/polling_interval.
 	# Check pvmove or lvconvert progress at this interval (seconds).
@@ -1750,7 +1837,8 @@ activation {
 	#     This setting should not normally be used, but may sometimes
 	#     assist with data recovery.
 	#
-	activation_mode = "degraded"
+	# This configuration option has an automatic default value.
+	# activation_mode = "degraded"
 
 	# Configuration option activation/lock_start_list.
 	# Locking is started only for VGs selected by this list.

man/lvchange.8_pregen

@@ -66,6 +66,8 @@ lvchange \(em Change the attributes of logical volume(s)
     \fB--ignorelockingfailure\fP
 .br
     \fB--ignoremonitoring\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -419,6 +421,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -674,6 +678,16 @@ Do not interact with dmeventd unless --monitor is specified.
 Do not use this if dmeventd is already monitoring a device.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvconvert.8_pregen

@@ -66,6 +66,8 @@ lvconvert \(em Change logical volume layout
  \fB-h\fP|\fB--help\fP
 .br
  \fB-i\fP|\fB--interval\fP \fINumber\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -670,7 +672,7 @@ Convert LV to type thin-pool.
 .RE
 .P
 .RS 4
-LV1 types: linear striped cache raid error zero
+LV1 types: linear striped cache raid error zero writecache
 .RE
 .P
 \(em
@@ -963,6 +965,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -1183,6 +1187,16 @@ Display help text.
 Report progress at regular intervals.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvcreate.8_pregen

@@ -74,6 +74,8 @@ lvcreate \(em Create a logical volume
  \fB-K\fP|\fB--ignoreactivationskip\fP
 .br
     \fB--ignoremonitoring\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -805,6 +807,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -1075,6 +1079,16 @@ Do not interact with dmeventd unless --monitor is specified.
 Do not use this if dmeventd is already monitoring a device.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvdisplay.8_pregen

@@ -110,6 +110,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -228,6 +230,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvextend.8_pregen

@@ -38,6 +38,8 @@ lvextend \(em Add space to a logical volume
  \fB-f\fP|\fB--force\fP
 .br
  \fB-h\fP|\fB--help\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -251,6 +253,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -373,6 +377,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvm-fullreport.8_pregen

@@ -106,6 +106,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -202,6 +204,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvm-lvpoll.8_pregen

@@ -62,6 +62,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -147,6 +149,16 @@ Display help text.
 Report progress at regular intervals.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvmconfig.8_pregen

@@ -103,6 +103,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -204,6 +206,16 @@ and \fBdiff\fP types include unsupported settings in their output by default,
 all the other types ignore unsupported settings.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB-l\fP|\fB--list\fP
 .br
 List config settings with summarizing comment. This is the same as using

man/lvmdevices.8_pregen

@@ -27,6 +27,8 @@ lvmdevices \(em Manage the devices file
     \fB--deldev\fP \fIPV\fP
 .br
     \fB--delpvid\fP \fIString\fP
+.br
+    \fB--deviceidtype\fP \fIString\fP
 .br
     \fB--devices\fP \fIPV\fP
 .br
@@ -35,6 +37,8 @@ lvmdevices \(em Manage the devices file
     \fB--driverloaded\fP \fBy\fP|\fBn\fP
 .br
  \fB-h\fP|\fB--help\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -70,18 +74,18 @@ remove it from the devices file with lvmdevices --deldev.  The
 vgimportdevices(8) command adds all PVs from a VG to the devices file,
 and updates the VG metadata to include device IDs of the PVs.
 .P
-Commands adding new devices to the devices file necessarily look outside
+Commands that add new devices to the devices file necessarily look outside
-the existing devices file to find the devices to add.  pvcreate, vgcreate,
+the existing devices file to find the devices being added.  pvcreate,
-and vgextend also look outside the devices file to create new PVs and add
+vgcreate, and vgextend also look outside the devices file to create new
-them to the devices file.
+PVs and add those PVs to the devices file.
 .P
 LVM records devices in the devices file using hardware-specific IDs, such
 as the WWID, and attempts to use subsystem-specific IDs for virtual device
-types (which also aim to be as unique and stable as possible.)
+types (which also aim to be as unique and stable as possible.) These
-These device IDs are also written in the VG metadata.  When no hardware or
+device IDs are also written in the VG metadata.  When no hardware or
 virtual ID is available, lvm falls back using the unstable device name as
-the device ID.  When devnames are used, lvm performs extra scanning to
+the device ID.  When devnames are used as IDs, lvm performs extra scanning
-find devices if their devname changes, e.g. after reboot.
+to find devices if their devname changes, e.g. after reboot.
 .P
 When proper device IDs are used, an lvm command will not look at devices
 outside the devices file, but when devnames are used as a fallback, lvm
@@ -95,12 +99,13 @@ overriding the devices file.  The listed devices act as a sort of devices
 file in terms of limiting which devices lvm will see and use.  Devices
 that are not listed will appear to be missing to the lvm command.
 .P
-Multiple devices files can be kept in \fI#DEFAULT_SYS_DIR#/devices\fP, which allows lvm
+Multiple devices files can be kept \fI#DEFAULT_SYS_DIR#/devices\fP, which
-to be used with different sets of devices, e.g. system devices do not need
+allows lvm to be used with different sets of devices.  For example, system
-to be exposed to a specific application, and the application can use lvm on
+devices do not need to be exposed to a specific application, and the
-its own devices that are not exposed to the system.  The option
+application can use lvm on its own devices that are not exposed to the
---devicesfile <filename> is used to select the devices file to use with the
+system.  The option --devicesfile <filename> is used to select the devices
-command.  Without the option set, the default system devices file is used.
+file to use with the command.  Without the option set, the default system
+devices file is used.
 .P
 Setting --devicesfile "" causes lvm to not use a devices file.
 .P
@@ -120,6 +125,45 @@ if it does not yet exist.
 .P
 It is recommended to use lvm commands to make changes to the devices file to
 ensure proper updates.
+.P
+The device ID and device ID type are included in the VG metadata and can
+be reported with pvs -o deviceid,deviceidtype.  (Note that the lvmdevices
+command does not update VG metadata, but subsequent lvm commands modifying
+the metadata will include the device ID.)
+.P
+Possible device ID types are:
+.br
+.IP \[bu] 2
+.B sys_wwid
+uses the wwid reported by sysfs.  This is the first choice for non-virtual
+devices.
+.IP \[bu] 2
+.B sys_serial
+uses the serial number reported by sysfs.  This is the second choice for
+non-virtual devices.
+.IP \[bu] 2
+.B mpath_uuid
+is used for dm multipath devices, reported by sysfs.
+.IP \[bu] 2
+.B crypt_uuid
+is used for dm crypt devices, reported by sysfs.
+.IP \[bu] 2
+.B md_uuid
+is used for md devices, reported by sysfs.
+.B lvmlv_uuid
+is used if a PV is placed on top of an lvm LV, reported by sysfs.
+.IP \[bu] 2
+.B loop_file
+is used for loop devices, the backing file name repored by sysfs.
+.IP \[bu] 2
+.B devname
+the device name is used if no other type applies.
+.P
+
+The default choice for device ID type can be overriden using lvmdevices
+--addev --deviceidtype <type>.  If the specified type is available for the
+device it will be used, otherwise the device will be added using the type
+that would otherwise be chosen.
 .
 .SH USAGE
 .
@@ -169,6 +213,8 @@ Add a device to the devices file.
 .br
 .RS 4
 .ad l
+[    \fB--deviceidtype\fP \fIString\fP ]
+.br
 [ COMMON_OPTIONS ]
 .ad b
 .RE
@@ -247,6 +293,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -308,6 +356,13 @@ Remove a device from the devices file.
 Remove a device with the PVID from the devices file.
 .
 .HP
+\fB--deviceidtype\fP \fIString\fP
+.br
+The type of device ID to use for the device.
+If the specified type is available for the device,
+then it will override the default type that lvm would use.
+.
+.HP
 \fB--devices\fP \fIPV\fP
 .br
 Devices that the command can use. This option can be repeated
@@ -335,6 +390,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvmdiskscan.8_pregen

@@ -60,6 +60,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -123,6 +125,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvreduce.8_pregen

@@ -82,6 +82,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -179,6 +181,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvremove.8_pregen

@@ -88,6 +88,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -163,6 +165,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvrename.8_pregen

@@ -72,6 +72,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -141,6 +143,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvresize.8_pregen

@@ -38,6 +38,8 @@ lvresize \(em Resize a logical volume
  \fB-f\fP|\fB--force\fP
 .br
  \fB-h\fP|\fB--help\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -209,6 +211,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -331,6 +335,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvs.8_pregen

@@ -106,6 +106,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -212,6 +214,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/lvscan.8_pregen

@@ -65,6 +65,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -146,6 +148,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvchange.8_pregen

@@ -109,6 +109,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -206,6 +208,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvck.8_pregen

@@ -32,6 +32,8 @@ pvck \(em Check metadata on physical volumes
  \fB-f\fP|\fB--file\fP \fIString\fP
 .br
  \fB-h\fP|\fB--help\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--labelsector\fP \fINumber\fP
 .br
@@ -305,6 +307,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -389,6 +393,16 @@ Metadata file to read or write.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--labelsector\fP \fINumber\fP
 .br
 By default the PV is labelled with an LVM2 identifier in its second

man/pvcreate.8_pregen

@@ -158,6 +158,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -256,6 +258,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--labelsector\fP \fINumber\fP
 .br
 By default the PV is labelled with an LVM2 identifier in its second

man/pvdisplay.8_pregen

@@ -108,6 +108,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -218,6 +220,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvmove.8_pregen

@@ -112,6 +112,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -232,6 +234,16 @@ Display help text.
 Report progress at regular intervals.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvremove.8_pregen

@@ -61,6 +61,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -130,6 +132,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvresize.8_pregen

@@ -56,6 +56,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -119,6 +121,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvs.8_pregen

@@ -104,6 +104,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -202,6 +204,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/pvscan.8_pregen

@@ -6,12 +6,80 @@ pvscan \(em List all physical volumes
 .
 .SH SYNOPSIS
 .
-\fBpvscan\fP \fIoption_args\fP
+\fBpvscan\fP \fIoption_args\fP \fIposition_args\fP
 .br
     [ \fIoption_args\fP ]
 .br
     [ \fIposition_args\fP ]
 .br
+.P
+.ad l
+ \fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP
+.br
+    \fB--cache\fP
+.br
+    \fB--checkcomplete\fP
+.br
+    \fB--commandprofile\fP \fIString\fP
+.br
+    \fB--config\fP \fIString\fP
+.br
+ \fB-d\fP|\fB--debug\fP
+.br
+    \fB--devices\fP \fIPV\fP
+.br
+    \fB--devicesfile\fP \fIString\fP
+.br
+    \fB--driverloaded\fP \fBy\fP|\fBn\fP
+.br
+ \fB-e\fP|\fB--exported\fP
+.br
+ \fB-h\fP|\fB--help\fP
+.br
+    \fB--ignorelockingfailure\fP
+.br
+    \fB--journal\fP \fIString\fP
+.br
+    \fB--listlvs\fP
+.br
+    \fB--listvg\fP
+.br
+    \fB--lockopt\fP \fIString\fP
+.br
+    \fB--longhelp\fP
+.br
+ \fB-j\fP|\fB--major\fP \fINumber\fP
+.br
+    \fB--minor\fP \fINumber\fP
+.br
+    \fB--nolocking\fP
+.br
+    \fB--noudevsync\fP
+.br
+ \fB-n\fP|\fB--novolumegroup\fP
+.br
+    \fB--profile\fP \fIString\fP
+.br
+ \fB-q\fP|\fB--quiet\fP
+.br
+    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP
+.br
+ \fB-s\fP|\fB--short\fP
+.br
+ \fB-t\fP|\fB--test\fP
+.br
+    \fB--udevoutput\fP
+.br
+ \fB-u\fP|\fB--uuid\fP
+.br
+ \fB-v\fP|\fB--verbose\fP
+.br
+    \fB--version\fP
+.br
+    \fB--vgonline\fP
+.br
+ \fB-y\fP|\fB--yes\fP
+.ad b
 .
 .SH DESCRIPTION
 .
@@ -92,21 +160,29 @@ Display PV information.
 .br
 [ \fB-u\fP|\fB--uuid\fP ]
 .br
+[    \fB--ignorelockingfailure\fP ]
+.br
+[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+.br
 [ COMMON_OPTIONS ]
 .ad b
 .RE
 .P
-Autoactivate a VG when all PVs are online.
+\(em
+.P
+Record that a PV is online or offline.
 .br
 .P
 \fBpvscan\fP \fB--cache\fP
 .br
 .RS 4
 .ad l
-[ \fB-a\fP|\fB--activate\fP \fBay\fP ]
-.br
 [ \fB-j\fP|\fB--major\fP \fINumber\fP ]
 .br
+[    \fB--ignorelockingfailure\fP ]
+.br
+[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+.br
 [    \fB--minor\fP \fINumber\fP ]
 .br
 [    \fB--noudevsync\fP ]
@@ -118,13 +194,104 @@ Autoactivate a VG when all PVs are online.
 [ \fIString\fP|\fIPV\fP ... ]
 .RE
 .P
-Common options for command:
+\(em
-.
+.P
+Record that a PV is online and autoactivate the VG if complete.
+.br
+.P
+\fBpvscan\fP \fB--cache\fP \fB-a\fP|\fB--activate\fP \fBay\fP
+.br
+.RS 4
+.ad l
+[ \fB-j\fP|\fB--major\fP \fINumber\fP ]
+.br
+[    \fB--ignorelockingfailure\fP ]
+.br
+[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+.br
+[    \fB--minor\fP \fINumber\fP ]
+.br
+[    \fB--noudevsync\fP ]
+.br
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.RS 4
+[ \fIString\fP|\fIPV\fP ... ]
+.RE
+.P
+\(em
+.P
+Record that a PV is online and list the VG using the PV.
+.br
+.P
+\fBpvscan\fP \fB--cache\fP \fB--listvg\fP \fIPV\fP
+.br
 .RS 4
 .ad l
 [    \fB--ignorelockingfailure\fP ]
 .br
-[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+[    \fB--checkcomplete\fP ]
+.br
+[    \fB--vgonline\fP ]
+.br
+[    \fB--udevoutput\fP ]
+.br
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
+Record that a PV is online and list LVs using the PV.
+.br
+.P
+\fBpvscan\fP \fB--cache\fP \fB--listlvs\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[    \fB--ignorelockingfailure\fP ]
+.br
+[    \fB--checkcomplete\fP ]
+.br
+[    \fB--vgonline\fP ]
+.br
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
+List LVs using the PV.
+.br
+.P
+\fBpvscan\fP \fB--listlvs\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
+List the VG using the PV.
+.br
+.P
+\fBpvscan\fP \fB--listvg\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
+Common options for command:
+.
+.RS 4
+.ad l
 .ad b
 .RE
 .P
@@ -154,6 +321,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -181,6 +350,15 @@ Auto-activate LVs in a VG when the PVs scanned have completed the VG.
 Scan one or more devices and record that they are online.
 .
 .HP
+\fB--checkcomplete\fP
+.br
+Check if all the devices used by a VG or LV are present,
+and print "complete" or "incomplete" for each listed
+VG or LV.  This option is used as a part of event-based
+autoactivation, so pvscan will do nothing if this option
+is set and event_activation=0 in the config settings.
+.
+.HP
 \fB--commandprofile\fP \fIString\fP
 .br
 The command profile to use for command configuration.
@@ -239,6 +417,26 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
+\fB--listlvs\fP
+.br
+Print a list of LVs that use the device.
+.
+.HP
+\fB--listvg\fP
+.br
+Print the VG that uses the device.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.
@@ -314,6 +512,11 @@ error messages in multi-stage operations if a tool relies on reading
 back metadata it believes has changed but hasn't.
 .
 .HP
+\fB--udevoutput\fP
+.br
+Command output is modified to be imported from a udev rule.
+.
+.HP
 \fB-u\fP|\fB--uuid\fP
 .br
 Show UUIDs in addition to device names.
@@ -330,6 +533,12 @@ of messages sent to stdout and stderr.
 Display version information.
 .
 .HP
+\fB--vgonline\fP
+.br
+The first command to see a complete VG will report it uniquely.
+Other commands to see the complete VG will report it differently.
+.
+.HP
 \fB-y\fP|\fB--yes\fP
 .br
 Do not prompt for confirmation interactively but always assume the

man/vgcfgbackup.8_pregen

@@ -81,6 +81,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -163,6 +165,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgcfgrestore.8_pregen

@@ -31,6 +31,8 @@ vgcfgrestore \(em Restore volume group configuration
     \fB--force\fP
 .br
  \fB-h\fP|\fB--help\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
  \fB-l\fP|\fB--list\fP
 .br
@@ -162,6 +164,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -240,6 +244,16 @@ thin pool kernel metadata precisely.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB-l\fP|\fB--list\fP
 .br
 List metadata backup and archive files pertaining to the VG.

man/vgchange.8_pregen

@@ -52,6 +52,8 @@ vgchange \(em Change volume group attributes
     \fB--ignorelockingfailure\fP
 .br
     \fB--ignoremonitoring\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -426,6 +428,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -604,6 +608,16 @@ Do not interact with dmeventd unless --monitor is specified.
 Do not use this if dmeventd is already monitoring a device.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgck.8_pregen

@@ -79,6 +79,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -142,6 +144,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgconvert.8_pregen

@@ -67,6 +67,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -151,6 +153,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--labelsector\fP \fINumber\fP
 .br
 By default the PV is labelled with an LVM2 identifier in its second

man/vgcreate.8_pregen

@@ -107,6 +107,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -233,6 +235,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--labelsector\fP \fINumber\fP
 .br
 By default the PV is labelled with an LVM2 identifier in its second

man/vgdisplay.8_pregen

@@ -105,6 +105,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -215,6 +217,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgexport.8_pregen

@@ -93,6 +93,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -160,6 +162,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgextend.8_pregen

@@ -85,6 +85,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -174,6 +176,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--labelsector\fP \fINumber\fP
 .br
 By default the PV is labelled with an LVM2 identifier in its second

man/vgimport.8_pregen

@@ -81,6 +81,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -155,6 +157,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgimportclone.8_pregen

@@ -62,6 +62,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -145,6 +147,16 @@ will not be changed (nor will their associated PVs).
 Add devices to the devices file.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgimportdevices.8_pregen

@@ -86,6 +86,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -159,6 +161,16 @@ See \fBlvmsystemid\fP(7) for more information about foreign VGs.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgmerge.8_pregen

@@ -59,6 +59,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -128,6 +130,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB-l\fP|\fB--list\fP
 .br
 Display merged destination VG like vgdisplay -v.

man/vgmknodes.8_pregen

@@ -66,6 +66,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -135,6 +137,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgreduce.8_pregen

@@ -31,6 +31,8 @@ vgreduce \(em Remove physical volume(s) from a volume group
  \fB-f\fP|\fB--force\fP
 .br
  \fB-h\fP|\fB--help\fP
+.br
+    \fB--journal\fP \fIString\fP
 .br
     \fB--lockopt\fP \fIString\fP
 .br
@@ -142,6 +144,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -222,6 +226,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgremove.8_pregen

@@ -67,6 +67,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -136,6 +138,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgrename.8_pregen

@@ -85,6 +85,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -160,6 +162,16 @@ Use with extreme caution.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgs.8_pregen

@@ -102,6 +102,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -199,6 +201,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgscan.8_pregen

@@ -59,6 +59,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -128,6 +130,16 @@ Allows a command to continue with read-only metadata
 operations after locking failures.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.

man/vgsplit.8_pregen

@@ -102,6 +102,8 @@ Common options for lvm:
 .br
 [    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--journal\fP \fIString\fP ]
+.br
 [    \fB--lockopt\fP \fIString\fP ]
 .br
 [    \fB--longhelp\fP ]
@@ -196,6 +198,16 @@ For testing and debugging.
 Display help text.
 .
 .HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
 \fB--lockopt\fP \fIString\fP
 .br
 Used to pass options for special cases to lvmlockd.