man: regenerate

man/lvchange.8_pregen

@@ -1130,9 +1130,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvconvert.8_pregen

@@ -1499,9 +1499,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvcreate.8_pregen

@@ -1562,9 +1562,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvdisplay.8_pregen

@@ -501,9 +501,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvextend.8_pregen

@@ -637,9 +637,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvm-fullreport.8_pregen

@@ -486,9 +486,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvm-lvpoll.8_pregen

@@ -236,9 +236,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvmconfig.8_pregen

@@ -459,9 +459,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvmdiskscan.8_pregen

@@ -214,9 +214,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvreduce.8_pregen

@@ -313,9 +313,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvremove.8_pregen

@@ -304,9 +304,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvrename.8_pregen

@@ -240,9 +240,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvresize.8_pregen

@@ -572,9 +572,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvs.8_pregen

@@ -517,9 +517,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvscan.8_pregen

@@ -277,9 +277,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvchange.8_pregen

@@ -371,9 +371,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvck.8_pregen

@@ -203,9 +203,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvcreate.8_pregen

@@ -411,9 +411,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvdisplay.8_pregen

@@ -488,9 +488,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvmove.8_pregen

@@ -346,9 +346,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvremove.8_pregen

@@ -222,9 +222,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvresize.8_pregen

@@ -217,9 +217,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvs.8_pregen

@@ -507,9 +507,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvscan.8_pregen

@@ -418,9 +418,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgcfgbackup.8_pregen

@@ -271,9 +271,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgcfgrestore.8_pregen

@@ -348,9 +348,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgchange.8_pregen

@@ -1095,9 +1095,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgck.8_pregen

@@ -209,9 +209,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgconvert.8_pregen

@@ -283,9 +283,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgcreate.8_pregen

@@ -486,9 +486,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgdisplay.8_pregen

@@ -471,9 +471,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgexport.8_pregen

@@ -267,9 +267,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgextend.8_pregen

@@ -354,9 +354,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgimport.8_pregen

@@ -265,9 +265,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgimportclone.8_pregen

@@ -220,9 +220,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgmerge.8_pregen

@@ -207,9 +207,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgmknodes.8_pregen

@@ -242,9 +242,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgreduce.8_pregen

@@ -368,9 +368,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgremove.8_pregen

@@ -259,9 +259,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgrename.8_pregen

@@ -246,9 +246,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgs.8_pregen

@@ -488,9 +488,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgscan.8_pregen

@@ -239,9 +239,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgsplit.8_pregen

@@ -332,9 +332,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES