From ca38251b1043c49f5453c2c571876b12aad6b450 Mon Sep 17 00:00:00 2001 From: Marian Csontos Date: Fri, 6 Aug 2021 13:23:11 +0200 Subject: [PATCH] make: generate --- conf/example.conf.in | 258 ++++++++++++++++++++++++----------- man/lvchange.8_pregen | 14 ++ man/lvconvert.8_pregen | 14 ++ man/lvcreate.8_pregen | 14 ++ man/lvdisplay.8_pregen | 12 ++ man/lvextend.8_pregen | 14 ++ man/lvm-fullreport.8_pregen | 12 ++ man/lvm-lvpoll.8_pregen | 12 ++ man/lvmconfig.8_pregen | 12 ++ man/lvmdevices.8_pregen | 14 ++ man/lvmdiskscan.8_pregen | 12 ++ man/lvreduce.8_pregen | 12 ++ man/lvremove.8_pregen | 12 ++ man/lvrename.8_pregen | 12 ++ man/lvresize.8_pregen | 14 ++ man/lvs.8_pregen | 12 ++ man/lvscan.8_pregen | 12 ++ man/pvchange.8_pregen | 12 ++ man/pvck.8_pregen | 14 ++ man/pvcreate.8_pregen | 12 ++ man/pvdisplay.8_pregen | 12 ++ man/pvmove.8_pregen | 12 ++ man/pvremove.8_pregen | 12 ++ man/pvresize.8_pregen | 12 ++ man/pvs.8_pregen | 12 ++ man/pvscan.8_pregen | 216 ++++++++++++++++++++++++++++- man/vgcfgbackup.8_pregen | 12 ++ man/vgcfgrestore.8_pregen | 14 ++ man/vgchange.8_pregen | 14 ++ man/vgck.8_pregen | 12 ++ man/vgconvert.8_pregen | 12 ++ man/vgcreate.8_pregen | 12 ++ man/vgdisplay.8_pregen | 12 ++ man/vgexport.8_pregen | 12 ++ man/vgextend.8_pregen | 12 ++ man/vgimport.8_pregen | 12 ++ man/vgimportclone.8_pregen | 12 ++ man/vgimportdevices.8_pregen | 12 ++ man/vgmerge.8_pregen | 12 ++ man/vgmknodes.8_pregen | 12 ++ man/vgreduce.8_pregen | 14 ++ man/vgremove.8_pregen | 12 ++ man/vgrename.8_pregen | 12 ++ man/vgs.8_pregen | 12 ++ man/vgscan.8_pregen | 12 ++ man/vgsplit.8_pregen | 12 ++ 46 files changed, 933 insertions(+), 89 deletions(-) diff --git a/conf/example.conf.in b/conf/example.conf.in index 5bcbc65e7..1f7c449bf 100644 --- a/conf/example.conf.in +++ b/conf/example.conf.in @@ -33,15 +33,18 @@ config { # any configuration mismatch is ignored and the default value is used # without any warning (a message about the configuration key not being # found is issued in verbose mode only). - checks = 1 + # This configuration option has an automatic default value. + # checks = 1 # Configuration option config/abort_on_errors. # Abort the LVM process if a configuration mismatch is found. - abort_on_errors = 0 + # This configuration option has an automatic default value. + # abort_on_errors = 0 # Configuration option config/profile_dir. # Directory where LVM looks for configuration profiles. - profile_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@" + # This configuration option has an automatic default value. + # profile_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@" } # Configuration section devices. @@ -52,12 +55,14 @@ devices { # Directory in which to create volume group device nodes. # Commands also accept this as a prefix on volume group names. # This configuration option is advanced. - dir = "/dev" + # This configuration option has an automatic default value. + # dir = "/dev" # Configuration option devices/scan. # Directories containing device nodes to use with LVM. # This configuration option is advanced. - scan = [ "/dev" ] + # This configuration option has an automatic default value. + # scan = [ "/dev" ] # Configuration option devices/obtain_device_list_from_udev. # Obtain the list of available devices from udev. @@ -67,14 +72,16 @@ devices { # setting applies only to the udev-managed device directory; other # directories will be scanned fully. LVM needs to be compiled with # udev support for this setting to apply. - obtain_device_list_from_udev = 0 + # This configuration option has an automatic default value. + # obtain_device_list_from_udev = 0 # Configuration option devices/external_device_info_source. # Enable device information from udev. # If set to "udev", lvm will supplement its own native device information # with information from libudev. This can potentially improve the detection # of MD component devices and multipath component devices. - external_device_info_source = "none" + # This configuration option has an automatic default value. + # external_device_info_source = "none" # Configuration option devices/hints. # Use a local file to remember which devices have PVs on them. @@ -119,7 +126,7 @@ devices { # be used, regardless of this setting, when the --devicesfile # option is set to a specific file name. # This configuration option has an automatic default value. - # use_devicesfile = 0 + # use_devicesfile = 1 # Configuration option devices/devicesfile. # The name of the system devices file, listing devices that LVM should use. @@ -200,7 +207,8 @@ devices { # Restrict device scanning to block devices appearing in sysfs. # This is a quick way of filtering out block devices that are not # present on the system. sysfs must be part of the kernel and mounted.) - sysfs_scan = 1 + # This configuration option has an automatic default value. + # sysfs_scan = 1 # Configuration option devices/scan_lvs. # Scan LVM LVs for layered PVs, allowing LVs to be used as PVs. @@ -214,11 +222,19 @@ devices { # use PVs that exist on LVs, and will not allow a PV to be created on # an LV. The LVs are ignored using a built in device filter that # identifies and excludes LVs. - scan_lvs = 0 + # This configuration option has an automatic default value. + # scan_lvs = 0 # Configuration option devices/multipath_component_detection. # Ignore devices that are components of DM multipath devices. - multipath_component_detection = 1 + # This configuration option has an automatic default value. + # multipath_component_detection = 1 + + # Configuration option devices/multipath_wwids_file. + # The path to the multipath wwids file used for multipath component detection. + # Set this to an empty string to disable the use of the multipath wwids file. + # This configuration option has an automatic default value. + # multipath_wwids_file = "/etc/multipath/wwids" # Configuration option devices/multipath_wwids_file. # The path to the multipath wwids file used for multipath component detection. @@ -235,7 +251,8 @@ devices { # In cases where the MD superblock is located at the end of the # component devices, it is more difficult for LVM to consistently # identify an MD component, see the md_component_checks setting. - md_component_detection = 1 + # This configuration option has an automatic default value. + # md_component_detection = 1 # Configuration option devices/md_component_checks. # The checks LVM should use to detect MD component devices. @@ -259,7 +276,8 @@ devices { # Ignore devices that are components of firmware RAID devices. # LVM must use an external_device_info_source other than none for this # detection to execute. - fw_raid_component_detection = 0 + # This configuration option has an automatic default value. + # fw_raid_component_detection = 0 # Configuration option devices/md_chunk_alignment. # Align the start of a PV data area with md device's stripe-width. @@ -268,7 +286,8 @@ devices { # with the value detected for this setting. # This setting is overridden by data_alignment_detection, # data_alignment, and the --dataalignment option. - md_chunk_alignment = 1 + # This configuration option has an automatic default value. + # md_chunk_alignment = 1 # Configuration option devices/default_data_alignment. # Align the start of a PV data area with this number of MiB. @@ -291,7 +310,8 @@ devices { # if they are not aligned with the value detected for this setting. # This setting is overridden by data_alignment and the --dataalignment # option. - data_alignment_detection = 1 + # This configuration option has an automatic default value. + # data_alignment_detection = 1 # Configuration option devices/data_alignment. # Align the start of a PV data area with this number of KiB. @@ -299,7 +319,8 @@ devices { # Set to 0 to disable, in which case default_data_alignment # is used to align the first PE in units of MiB. # This setting is overridden by the --dataalignment option. - data_alignment = 0 + # This configuration option has an automatic default value. + # data_alignment = 0 # Configuration option devices/data_alignment_offset_detection. # Shift the start of an aligned PV data area based on sysfs information. @@ -310,13 +331,15 @@ devices { # is the lowest aligned logical block, the 4KiB sectors start at # LBA -1, and consequently sector 63 is aligned on a 4KiB boundary). # This setting is overridden by the --dataalignmentoffset option. - data_alignment_offset_detection = 1 + # This configuration option has an automatic default value. + # data_alignment_offset_detection = 1 # Configuration option devices/ignore_suspended_devices. # Ignore DM devices that have I/O suspended while scanning devices. # Otherwise, LVM waits for a suspended device to become accessible. # This should only be needed in recovery situations. - ignore_suspended_devices = 0 + # This configuration option has an automatic default value. + # ignore_suspended_devices = 0 # Configuration option devices/ignore_lvm_mirrors. # Do not scan 'mirror' LVs to avoid possible deadlocks. @@ -335,18 +358,21 @@ devices { # a scan of the mirror's labels. The 'mirror' scanning problems do not # apply to LVM RAID types like 'raid1' which handle failures in a # different way, making them a better choice for VG stacking. - ignore_lvm_mirrors = 1 + # This configuration option has an automatic default value. + # ignore_lvm_mirrors = 1 # Configuration option devices/require_restorefile_with_uuid. # Allow use of pvcreate --uuid without requiring --restorefile. - require_restorefile_with_uuid = 1 + # This configuration option has an automatic default value. + # require_restorefile_with_uuid = 1 # Configuration option devices/pv_min_size. # Minimum size in KiB of block devices which can be used as PVs. # In a clustered environment all nodes must use the same value. # Any value smaller than 512KiB is ignored. The previous built-in # value was 512. - pv_min_size = 2048 + # This configuration option has an automatic default value. + # pv_min_size = 2048 # Configuration option devices/issue_discards. # Issue discards to PVs that are no longer used by an LV. @@ -359,7 +385,8 @@ devices { # benefit from discards, but SSDs and thinly provisioned LUNs # generally do. If enabled, discards will only be issued if both the # storage and kernel provide support. - issue_discards = 0 + # This configuration option has an automatic default value. + # issue_discards = 0 # Configuration option devices/allow_changes_with_duplicate_pvs. # Allow VG modification while a PV appears on multiple devices. @@ -372,13 +399,15 @@ devices { # or activating LVs in it while a PV appears on multiple devices. # Enabling this setting allows the VG to be used as usual even with # uncertain devices. - allow_changes_with_duplicate_pvs = 0 + # This configuration option has an automatic default value. + # allow_changes_with_duplicate_pvs = 0 # Configuration option devices/allow_mixed_block_sizes. # Allow PVs in the same VG with different logical block sizes. # When allowed, the user is responsible to ensure that an LV is # using PVs with matching block sizes when necessary. - allow_mixed_block_sizes = 0 + # This configuration option has an automatic default value. + # allow_mixed_block_sizes = 0 } # Configuration section allocation. @@ -410,7 +439,8 @@ allocation { # policies to detect more situations where data can be grouped onto # the same disks. This setting can be used to disable the changes # and revert to the previous algorithm. - maximise_cling = 1 + # This configuration option has an automatic default value. + # maximise_cling = 1 # Configuration option allocation/use_blkid_wiping. # Use blkid to detect and erase existing signatures on new PVs and LVs. @@ -420,7 +450,8 @@ allocation { # code is currently able to recognize: MD device signatures, # swap signature, and LUKS signatures. To see the list of signatures # recognized by blkid, check the output of the 'blkid -k' command. - use_blkid_wiping = @DEFAULT_USE_BLKID_WIPING@ + # This configuration option has an automatic default value. + # use_blkid_wiping = @DEFAULT_USE_BLKID_WIPING@ # Configuration option allocation/wipe_signatures_when_zeroing_new_lvs. # Look for and erase any signatures while zeroing a new LV. @@ -437,12 +468,14 @@ allocation { # use_blkid_wiping.) Wiping each detected signature must be confirmed. # When this setting is disabled, signatures on new LVs are not detected # or erased unless the --wipesignatures option is used directly. - wipe_signatures_when_zeroing_new_lvs = 1 + # This configuration option has an automatic default value. + # wipe_signatures_when_zeroing_new_lvs = 1 # Configuration option allocation/mirror_logs_require_separate_pvs. # Mirror logs and images will always use different PVs. # The default setting changed in version 2.02.85. - mirror_logs_require_separate_pvs = 0 + # This configuration option has an automatic default value. + # mirror_logs_require_separate_pvs = 0 # Configuration option allocation/raid_stripe_all_devices. # Stripe across all PVs when RAID stripes are not specified. @@ -791,7 +824,8 @@ log { # Configuration option log/verbose. # Controls the messages sent to stdout or stderr. - verbose = 0 + # This configuration option has an automatic default value. + # verbose = 0 # Configuration option log/silent. # Suppress all non-essential messages from stdout. @@ -802,25 +836,37 @@ log { # for syslog and lvm2_log_fn purposes. # Any 'yes' or 'no' questions not overridden by other arguments are # suppressed and default to 'no'. - silent = 0 + # This configuration option has an automatic default value. + # silent = 0 # Configuration option log/syslog. # Send log messages through syslog. - syslog = 1 + # This configuration option has an automatic default value. + # syslog = 1 # Configuration option log/file. # Write error and debug log messages to a file specified here. # This configuration option does not have a default value defined. + # Configuration option log/journal. + # Record lvm information in the systemd journal. + # command: record commands that are run. + # output: record default output from commands. + # debug: record debug messages from commands. + # This configuration option has an automatic default value. + # journal = [ ] + # Configuration option log/overwrite. # Overwrite the log file each time the program is run. - overwrite = 0 + # This configuration option has an automatic default value. + # overwrite = 0 # Configuration option log/level. # The level of log messages that are sent to the log file or syslog. # There are 6 syslog-like log levels currently in use: 2 to 7 inclusive. # 7 is the most verbose (LOG_DEBUG). - level = 0 + # This configuration option has an automatic default value. + # level = 0 # Configuration option log/indent. # Indent messages according to their severity. @@ -829,7 +875,8 @@ log { # Configuration option log/command_names. # Display the command name on each line of output. - command_names = 0 + # This configuration option has an automatic default value. + # command_names = 0 # Configuration option log/prefix. # A prefix to use before the log message text. @@ -837,12 +884,14 @@ log { # Two spaces allows you to see/grep the severity of each message. # To make the messages look similar to the original LVM tools use: # indent = 0, command_names = 1, prefix = " -- " - prefix = " " + # This configuration option has an automatic default value. + # prefix = " " # Configuration option log/activation. # Log messages during activation. # Don't use this in low memory situations (can deadlock). - activation = 0 + # This configuration option has an automatic default value. + # activation = 0 # Configuration option log/debug_classes. # Select log messages by class. @@ -850,7 +899,8 @@ log { # debug output if the class is listed here. Classes currently # available: memory, devices, io, activation, allocation, # metadata, cache, locking, lvmpolld. Use "all" to see everything. - debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ] + # This configuration option has an automatic default value. + # debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ] # Configuration option log/debug_file_fields. # The fields included in debug output written to log file. @@ -877,30 +927,36 @@ backup { # Configuration option backup/backup. # Maintain a backup of the current metadata configuration. # Think very hard before turning this off! - backup = 1 + # This configuration option has an automatic default value. + # backup = 1 # Configuration option backup/backup_dir. # Location of the metadata backup files. # Remember to back up this directory regularly! - backup_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@" + # This configuration option has an automatic default value. + # backup_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@" # Configuration option backup/archive. # Maintain an archive of old metadata configurations. # Think very hard before turning this off. - archive = 1 + # This configuration option has an automatic default value. + # archive = 1 # Configuration option backup/archive_dir. # Location of the metdata archive files. # Remember to back up this directory regularly! - archive_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@" + # This configuration option has an automatic default value. + # archive_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@" # Configuration option backup/retain_min. # Minimum number of archives to keep. - retain_min = 10 + # This configuration option has an automatic default value. + # retain_min = 10 # Configuration option backup/retain_days. # Minimum number of days to keep archive files. - retain_days = 30 + # This configuration option has an automatic default value. + # retain_days = 30 } # Configuration section shell. @@ -909,7 +965,8 @@ shell { # Configuration option shell/history_size. # Number of lines of history to store in ~/.lvm_history. - history_size = 100 + # This configuration option has an automatic default value. + # history_size = 100 } # Configuration section global. @@ -919,16 +976,19 @@ global { # Configuration option global/umask. # The file creation mask for any files and directories created. # Interpreted as octal if the first digit is zero. - umask = 077 + # This configuration option has an automatic default value. + # umask = 077 # Configuration option global/test. # No on-disk metadata changes will be made in test mode. # Equivalent to having the -t option on every command. - test = 0 + # This configuration option has an automatic default value. + # test = 0 # Configuration option global/units. # Default value for --units argument. - units = "r" + # This configuration option has an automatic default value. + # units = "r" # Configuration option global/si_unit_consistency. # Distinguish between powers of 1024 and 1000 bytes. @@ -936,13 +996,15 @@ global { # e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB. # If scripts depend on the old behaviour, disable this setting # temporarily until they are updated. - si_unit_consistency = 1 + # This configuration option has an automatic default value. + # si_unit_consistency = 1 # Configuration option global/suffix. # Display unit suffix for sizes. # This setting has no effect if the units are in human-readable form # (global/units = "h") in which case the suffix is always displayed. - suffix = 1 + # This configuration option has an automatic default value. + # suffix = 1 # Configuration option global/activation. # Enable/disable communication with the kernel device-mapper. @@ -950,26 +1012,31 @@ global { # activating any logical volumes. If the device-mapper driver # is not present in the kernel, disabling this should suppress # the error messages. - activation = 1 + # This configuration option has an automatic default value. + # activation = 1 # Configuration option global/proc. # Location of proc filesystem. # This configuration option is advanced. - proc = "/proc" + # This configuration option has an automatic default value. + # proc = "/proc" # Configuration option global/etc. # Location of /etc system configuration directory. - etc = "@CONFDIR@" + # This configuration option has an automatic default value. + # etc = "@CONFDIR@" # Configuration option global/wait_for_locks. # When disabled, fail if a lock request would block. - wait_for_locks = 1 + # This configuration option has an automatic default value. + # wait_for_locks = 1 # Configuration option global/locking_dir. # Directory to use for LVM command file locks. # Local non-LV directory that holds file-based locks while commands are # in progress. A directory like /tmp that may get wiped on reboot is OK. - locking_dir = "@DEFAULT_LOCK_DIR@" + # This configuration option has an automatic default value. + # locking_dir = "@DEFAULT_LOCK_DIR@" # Configuration option global/prioritise_write_locks. # Allow quicker VG write access during high volume read access. @@ -978,7 +1045,8 @@ global { # requests immediately, delay them to allow the read-write requests to # be serviced. Without this setting, write access may be stalled by a # high volume of read-only requests. This option only affects file locks. - prioritise_write_locks = 1 + # This configuration option has an automatic default value. + # prioritise_write_locks = 1 # Configuration option global/library_dir. # Search this directory first for shared libraries. @@ -988,7 +1056,8 @@ global { # Abort a command that encounters an internal error. # Treat any internal errors as fatal errors, aborting the process that # encountered the internal error. Please only enable for debugging. - abort_on_internal_errors = 0 + # This configuration option has an automatic default value. + # abort_on_internal_errors = 0 # Configuration option global/metadata_read_only. # No operations that change on-disk metadata are permitted. @@ -996,7 +1065,8 @@ global { # repair will still be allowed to proceed exactly as if the repair had # been performed (except for the unchanged vg_seqno). Inappropriate # use could mess up your system, so seek advice first! - metadata_read_only = 0 + # This configuration option has an automatic default value. + # metadata_read_only = 0 # Configuration option global/mirror_segtype_default. # The segment type used by the short mirroring option -m. @@ -1022,7 +1092,8 @@ global { # cluster-aware and cannot be used in a shared (active/active) # fashion in a cluster. # - mirror_segtype_default = "@DEFAULT_MIRROR_SEGTYPE@" + # This configuration option has an automatic default value. + # mirror_segtype_default = "@DEFAULT_MIRROR_SEGTYPE@" # Configuration option global/support_mirrored_mirror_log. # Enable mirrored 'mirror' log type for testing. @@ -1052,7 +1123,8 @@ global { # effectively creating a RAID 0+1 array. The layering is suboptimal # in terms of providing redundancy and performance. # - raid10_segtype_default = "@DEFAULT_RAID10_SEGTYPE@" + # This configuration option has an automatic default value. + # raid10_segtype_default = "@DEFAULT_RAID10_SEGTYPE@" # Configuration option global/sparse_segtype_default. # The segment type used by the -V -L combination. @@ -1072,7 +1144,8 @@ global { # metadata. It has better performance, especially when more data # is used. It also supports full snapshots. # - sparse_segtype_default = "@DEFAULT_SPARSE_SEGTYPE@" + # This configuration option has an automatic default value. + # sparse_segtype_default = "@DEFAULT_SPARSE_SEGTYPE@" # Configuration option global/lvdisplay_shows_full_device_path. # Enable this to reinstate the previous lvdisplay name format. @@ -1107,7 +1180,8 @@ global { # Applicable only if LVM is compiled with lockd support in which # case there is also lvmlockd(8) man page available for more # information. - use_lvmlockd = 0 + # This configuration option has an automatic default value. + # use_lvmlockd = 0 # Configuration option global/lvmlockd_lock_retries. # Retry lvmlockd lock requests this many times. @@ -1280,15 +1354,18 @@ global { # uname # Set the system ID from the hostname (uname) of the system. # System IDs beginning localhost are not permitted. + # appmachineid + # Use an LVM-specific derivation of the local machine-id as the + # system ID. See 'man machine-id'. # machineid - # Use the contents of the machine-id file to set the system ID. - # Some systems create this file at installation time. - # See 'man machine-id' and global/etc. + # Use the contents of the machine-id file to set the system ID + # (appmachineid is recommended.) # file # Use the contents of another file (system_id_file) to set the # system ID. # - system_id_source = "none" + # This configuration option has an automatic default value. + # system_id_source = "none" # Configuration option global/system_id_file. # The full path to the file containing a system ID. @@ -1308,13 +1385,15 @@ global { # and to use its own control group. When this option is disabled, LVM # commands will supervise long running operations by forking themselves. # Applicable only if LVM is compiled with lvmpolld support. - use_lvmpolld = @DEFAULT_USE_LVMPOLLD@ + # This configuration option has an automatic default value. + # use_lvmpolld = @DEFAULT_USE_LVMPOLLD@ # Configuration option global/notify_dbus. # Enable D-Bus notification from LVM commands. # When enabled, an LVM command that changes PVs, changes VG metadata, # or changes the activation state of an LV will send a notification. - notify_dbus = 1 + # This configuration option has an automatic default value. + # notify_dbus = 1 # Configuration option global/io_memory_size. # The amount of memory in KiB that LVM allocates to perform disk io. @@ -1335,7 +1414,8 @@ activation { # Useful for debugging problems with activation. Some of the checks may # be expensive, so it's best to use this only when there seems to be a # problem. - checks = 0 + # This configuration option has an automatic default value. + # checks = 0 # Configuration option activation/udev_sync. # Use udev notifications to synchronize udev and LVM. @@ -1346,14 +1426,16 @@ activation { # that ignore the devices LVM creates. If enabled when udev is not # running, and LVM processes are waiting for udev, run the command # 'dmsetup udevcomplete_all' to wake them up. - udev_sync = 1 + # This configuration option has an automatic default value. + # udev_sync = 1 # Configuration option activation/udev_rules. # Use udev rules to manage LV device nodes and symlinks. # When disabled, LVM will manage the device nodes and symlinks for # active LVs itself. Manual intervention may be required if this # setting is changed while LVs are active. - udev_rules = 1 + # This configuration option has an automatic default value. + # udev_rules = 1 # Configuration option activation/verify_udev_operations. # Use extra checks in LVM to verify udev operations. @@ -1368,7 +1450,8 @@ activation { # If LV deactivation fails, LVM will retry for a few seconds before # failing. This may happen because a process run from a quick udev rule # temporarily opened the device. - retry_deactivation = 1 + # This configuration option has an automatic default value. + # retry_deactivation = 1 # Configuration option activation/missing_stripe_filler. # Method to fill missing stripes when activating an incomplete LV. @@ -1379,7 +1462,8 @@ activation { # other than 'error' with mirrored or snapshotted volumes is likely to # result in data corruption. # This configuration option is advanced. - missing_stripe_filler = "error" + # This configuration option has an automatic default value. + # missing_stripe_filler = "error" # Configuration option activation/use_linear_target. # Use the linear target to optimize single stripe LVs. @@ -1501,7 +1585,8 @@ activation { # The clean/dirty state of data is tracked for each region. # The value is rounded down to a power of two if necessary, and # is ignored if it is not a multiple of the machine memory page size. - raid_region_size = 2048 + # This configuration option has an automatic default value. + # raid_region_size = 2048 # Configuration option activation/error_when_full. # Return errors if a thin pool runs out of space. @@ -1546,7 +1631,8 @@ activation { # Attempt to use any extra physical volumes in the VG as spares and # replace faulty devices. # - raid_fault_policy = "warn" + # This configuration option has an automatic default value. + # raid_fault_policy = "warn" # Configuration option activation/mirror_image_fault_policy. # Defines how a device failure in a 'mirror' LV is handled. @@ -1583,13 +1669,15 @@ activation { # 'remove' if no suitable device and space can be allocated for the # replacement. # - mirror_image_fault_policy = "remove" + # This configuration option has an automatic default value. + # mirror_image_fault_policy = "remove" # Configuration option activation/mirror_log_fault_policy. # Defines how a device failure in a 'mirror' log LV is handled. # The mirror_image_fault_policy description for mirrored LVs also # applies to mirrored log LVs. - mirror_log_fault_policy = "allocate" + # This configuration option has an automatic default value. + # mirror_log_fault_policy = "allocate" # Configuration option activation/snapshot_autoextend_threshold. # Auto-extend a snapshot when its usage exceeds this percent. @@ -1604,7 +1692,8 @@ activation { # 840M, it is extended to 1.44G: # snapshot_autoextend_threshold = 70 # - snapshot_autoextend_threshold = 100 + # This configuration option has an automatic default value. + # snapshot_autoextend_threshold = 100 # Configuration option activation/snapshot_autoextend_percent. # Auto-extending a snapshot adds this percent extra space. @@ -1617,7 +1706,8 @@ activation { # 840M, it is extended to 1.44G: # snapshot_autoextend_percent = 20 # - snapshot_autoextend_percent = 20 + # This configuration option has an automatic default value. + # snapshot_autoextend_percent = 20 # Configuration option activation/thin_pool_autoextend_threshold. # Auto-extend a thin pool when its usage exceeds this percent. @@ -1632,7 +1722,8 @@ activation { # 840M, it is extended to 1.44G: # thin_pool_autoextend_threshold = 70 # - thin_pool_autoextend_threshold = 100 + # This configuration option has an automatic default value. + # thin_pool_autoextend_threshold = 100 # Configuration option activation/thin_pool_autoextend_percent. # Auto-extending a thin pool adds this percent extra space. @@ -1645,7 +1736,8 @@ activation { # 840M, it is extended to 1.44G: # thin_pool_autoextend_percent = 20 # - thin_pool_autoextend_percent = 20 + # This configuration option has an automatic default value. + # thin_pool_autoextend_percent = 20 # Configuration option activation/vdo_pool_autoextend_threshold. # Auto-extend a VDO pool when its usage exceeds this percent. @@ -1704,7 +1796,8 @@ activation { # Monitor LVs that are activated. # The --ignoremonitoring option overrides this setting. # When enabled, LVM will ask dmeventd to monitor activated LVs. - monitoring = 1 + # This configuration option has an automatic default value. + # monitoring = 1 # Configuration option activation/polling_interval. # Check pvmove or lvconvert progress at this interval (seconds). @@ -1746,7 +1839,8 @@ activation { # This setting should not normally be used, but may sometimes # assist with data recovery. # - activation_mode = "degraded" + # This configuration option has an automatic default value. + # activation_mode = "degraded" # Configuration option activation/lock_start_list. # Locking is started only for VGs selected by this list. diff --git a/man/lvchange.8_pregen b/man/lvchange.8_pregen index 2ecd491d7..b559c89c9 100644 --- a/man/lvchange.8_pregen +++ b/man/lvchange.8_pregen @@ -66,6 +66,8 @@ lvchange \(em Change the attributes of logical volume(s) \fB--ignorelockingfailure\fP .br \fB--ignoremonitoring\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -421,6 +423,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -678,6 +682,16 @@ Do not interact with dmeventd unless --monitor is specified. Do not use this if dmeventd is already monitoring a device. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvconvert.8_pregen b/man/lvconvert.8_pregen index db52c588a..679519303 100644 --- a/man/lvconvert.8_pregen +++ b/man/lvconvert.8_pregen @@ -66,6 +66,8 @@ lvconvert \(em Change logical volume layout \fB-h\fP|\fB--help\fP .br \fB-i\fP|\fB--interval\fP \fINumber\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -965,6 +967,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -1187,6 +1191,16 @@ Display help text. Report progress at regular intervals. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvcreate.8_pregen b/man/lvcreate.8_pregen index 931613285..2cccbbe56 100644 --- a/man/lvcreate.8_pregen +++ b/man/lvcreate.8_pregen @@ -74,6 +74,8 @@ lvcreate \(em Create a logical volume \fB-K\fP|\fB--ignoreactivationskip\fP .br \fB--ignoremonitoring\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -807,6 +809,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -1079,6 +1083,16 @@ Do not interact with dmeventd unless --monitor is specified. Do not use this if dmeventd is already monitoring a device. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvdisplay.8_pregen b/man/lvdisplay.8_pregen index f74b49190..a1740ebed 100644 --- a/man/lvdisplay.8_pregen +++ b/man/lvdisplay.8_pregen @@ -110,6 +110,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -230,6 +232,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvextend.8_pregen b/man/lvextend.8_pregen index c0c32dd95..be6992e94 100644 --- a/man/lvextend.8_pregen +++ b/man/lvextend.8_pregen @@ -38,6 +38,8 @@ lvextend \(em Add space to a logical volume \fB-f\fP|\fB--force\fP .br \fB-h\fP|\fB--help\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -253,6 +255,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -377,6 +381,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvm-fullreport.8_pregen b/man/lvm-fullreport.8_pregen index 19e6c4e56..02b38ef40 100644 --- a/man/lvm-fullreport.8_pregen +++ b/man/lvm-fullreport.8_pregen @@ -106,6 +106,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -204,6 +206,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvm-lvpoll.8_pregen b/man/lvm-lvpoll.8_pregen index e826a033e..7f45f6eb3 100644 --- a/man/lvm-lvpoll.8_pregen +++ b/man/lvm-lvpoll.8_pregen @@ -62,6 +62,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -149,6 +151,16 @@ Display help text. Report progress at regular intervals. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvmconfig.8_pregen b/man/lvmconfig.8_pregen index ee0ab0255..51946e1ec 100644 --- a/man/lvmconfig.8_pregen +++ b/man/lvmconfig.8_pregen @@ -103,6 +103,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -206,6 +208,16 @@ and \fBdiff\fP types include unsupported settings in their output by default, all the other types ignore unsupported settings. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB-l\fP|\fB--list\fP .br List config settings with summarizing comment. This is the same as using diff --git a/man/lvmdevices.8_pregen b/man/lvmdevices.8_pregen index d2c18d90b..d64c3a31a 100644 --- a/man/lvmdevices.8_pregen +++ b/man/lvmdevices.8_pregen @@ -37,6 +37,8 @@ lvmdevices \(em Manage the devices file \fB--driverloaded\fP \fBy\fP|\fBn\fP .br \fB-h\fP|\fB--help\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -288,6 +290,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -385,6 +389,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvmdiskscan.8_pregen b/man/lvmdiskscan.8_pregen index 42b9c50f3..7fd3d941d 100644 --- a/man/lvmdiskscan.8_pregen +++ b/man/lvmdiskscan.8_pregen @@ -60,6 +60,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -125,6 +127,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvreduce.8_pregen b/man/lvreduce.8_pregen index bfa7c720c..ea960eb53 100644 --- a/man/lvreduce.8_pregen +++ b/man/lvreduce.8_pregen @@ -82,6 +82,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -181,6 +183,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvremove.8_pregen b/man/lvremove.8_pregen index 86252a627..2bd7997a3 100644 --- a/man/lvremove.8_pregen +++ b/man/lvremove.8_pregen @@ -88,6 +88,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -165,6 +167,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvrename.8_pregen b/man/lvrename.8_pregen index 072699ff6..d41a4c241 100644 --- a/man/lvrename.8_pregen +++ b/man/lvrename.8_pregen @@ -72,6 +72,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -143,6 +145,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvresize.8_pregen b/man/lvresize.8_pregen index d1c50ba52..f3ea2536c 100644 --- a/man/lvresize.8_pregen +++ b/man/lvresize.8_pregen @@ -38,6 +38,8 @@ lvresize \(em Resize a logical volume \fB-f\fP|\fB--force\fP .br \fB-h\fP|\fB--help\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -211,6 +213,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -335,6 +339,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvs.8_pregen b/man/lvs.8_pregen index 9e185b5b4..2b2c5f193 100644 --- a/man/lvs.8_pregen +++ b/man/lvs.8_pregen @@ -106,6 +106,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -214,6 +216,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/lvscan.8_pregen b/man/lvscan.8_pregen index 7a1bfeb65..f459ab35b 100644 --- a/man/lvscan.8_pregen +++ b/man/lvscan.8_pregen @@ -65,6 +65,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -148,6 +150,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvchange.8_pregen b/man/pvchange.8_pregen index f2f96a180..4add9ca69 100644 --- a/man/pvchange.8_pregen +++ b/man/pvchange.8_pregen @@ -109,6 +109,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -208,6 +210,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvck.8_pregen b/man/pvck.8_pregen index 225ac7dc1..88200f21e 100644 --- a/man/pvck.8_pregen +++ b/man/pvck.8_pregen @@ -32,6 +32,8 @@ pvck \(em Check metadata on physical volumes \fB-f\fP|\fB--file\fP \fIString\fP .br \fB-h\fP|\fB--help\fP +.br + \fB--journal\fP \fIString\fP .br \fB--labelsector\fP \fINumber\fP .br @@ -307,6 +309,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -393,6 +397,16 @@ Metadata file to read or write. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--labelsector\fP \fINumber\fP .br By default the PV is labelled with an LVM2 identifier in its second diff --git a/man/pvcreate.8_pregen b/man/pvcreate.8_pregen index 1d9914ccf..a74a5ec2a 100644 --- a/man/pvcreate.8_pregen +++ b/man/pvcreate.8_pregen @@ -158,6 +158,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -258,6 +260,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--labelsector\fP \fINumber\fP .br By default the PV is labelled with an LVM2 identifier in its second diff --git a/man/pvdisplay.8_pregen b/man/pvdisplay.8_pregen index af8f0804c..22a0992b5 100644 --- a/man/pvdisplay.8_pregen +++ b/man/pvdisplay.8_pregen @@ -108,6 +108,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -220,6 +222,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvmove.8_pregen b/man/pvmove.8_pregen index 095b592a4..0f70497a2 100644 --- a/man/pvmove.8_pregen +++ b/man/pvmove.8_pregen @@ -112,6 +112,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -234,6 +236,16 @@ Display help text. Report progress at regular intervals. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvremove.8_pregen b/man/pvremove.8_pregen index 834a51678..3d4a86c09 100644 --- a/man/pvremove.8_pregen +++ b/man/pvremove.8_pregen @@ -61,6 +61,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -132,6 +134,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvresize.8_pregen b/man/pvresize.8_pregen index c2f7b6bb4..87d87c8ce 100644 --- a/man/pvresize.8_pregen +++ b/man/pvresize.8_pregen @@ -56,6 +56,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -121,6 +123,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvs.8_pregen b/man/pvs.8_pregen index 11313f50c..32c28e4d1 100644 --- a/man/pvs.8_pregen +++ b/man/pvs.8_pregen @@ -104,6 +104,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -204,6 +206,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/pvscan.8_pregen b/man/pvscan.8_pregen index 902a3527a..a15138d8b 100644 --- a/man/pvscan.8_pregen +++ b/man/pvscan.8_pregen @@ -6,12 +6,80 @@ pvscan \(em List all physical volumes . .SH SYNOPSIS . -\fBpvscan\fP \fIoption_args\fP +\fBpvscan\fP \fIoption_args\fP \fIposition_args\fP .br [ \fIoption_args\fP ] .br [ \fIposition_args\fP ] .br +.P +.ad l + \fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP +.br + \fB--cache\fP +.br + \fB--checkcomplete\fP +.br + \fB--commandprofile\fP \fIString\fP +.br + \fB--config\fP \fIString\fP +.br + \fB-d\fP|\fB--debug\fP +.br + \fB--devices\fP \fIPV\fP +.br + \fB--devicesfile\fP \fIString\fP +.br + \fB--driverloaded\fP \fBy\fP|\fBn\fP +.br + \fB-e\fP|\fB--exported\fP +.br + \fB-h\fP|\fB--help\fP +.br + \fB--ignorelockingfailure\fP +.br + \fB--journal\fP \fIString\fP +.br + \fB--listlvs\fP +.br + \fB--listvg\fP +.br + \fB--lockopt\fP \fIString\fP +.br + \fB--longhelp\fP +.br + \fB-j\fP|\fB--major\fP \fINumber\fP +.br + \fB--minor\fP \fINumber\fP +.br + \fB--nolocking\fP +.br + \fB--noudevsync\fP +.br + \fB-n\fP|\fB--novolumegroup\fP +.br + \fB--profile\fP \fIString\fP +.br + \fB-q\fP|\fB--quiet\fP +.br + \fB--reportformat\fP \fBbasic\fP|\fBjson\fP +.br + \fB-s\fP|\fB--short\fP +.br + \fB-t\fP|\fB--test\fP +.br + \fB--udevoutput\fP +.br + \fB-u\fP|\fB--uuid\fP +.br + \fB-v\fP|\fB--verbose\fP +.br + \fB--version\fP +.br + \fB--vgonline\fP +.br + \fB-y\fP|\fB--yes\fP +.ad b . .SH DESCRIPTION . @@ -92,21 +160,29 @@ Display PV information. .br [ \fB-u\fP|\fB--uuid\fP ] .br +[ \fB--ignorelockingfailure\fP ] +.br +[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ] +.br [ COMMON_OPTIONS ] .ad b .RE .P -Autoactivate a VG when all PVs are online. +\(em +.P +Record that a PV is online or offline. .br .P \fBpvscan\fP \fB--cache\fP .br .RS 4 .ad l -[ \fB-a\fP|\fB--activate\fP \fBay\fP ] -.br [ \fB-j\fP|\fB--major\fP \fINumber\fP ] .br +[ \fB--ignorelockingfailure\fP ] +.br +[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ] +.br [ \fB--minor\fP \fINumber\fP ] .br [ \fB--noudevsync\fP ] @@ -118,16 +194,100 @@ Autoactivate a VG when all PVs are online. [ \fIString\fP|\fIPV\fP ... ] .RE .P -Common options for command: -. +\(em +.P +Record that a PV is online and autoactivate the VG if complete. +.br +.P +\fBpvscan\fP \fB--cache\fP \fB-a\fP|\fB--activate\fP \fBay\fP +.br +.RS 4 +.ad l +[ \fB-j\fP|\fB--major\fP \fINumber\fP ] +.br +[ \fB--ignorelockingfailure\fP ] +.br +[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ] +.br +[ \fB--minor\fP \fINumber\fP ] +.br +[ \fB--noudevsync\fP ] +.br +[ COMMON_OPTIONS ] +.ad b +.RE +.RS 4 +[ \fIString\fP|\fIPV\fP ... ] +.RE +.P +\(em +.P +Record that a PV is online and list the VG using the PV. +.br +.P +\fBpvscan\fP \fB--cache\fP \fB--listvg\fP \fIPV\fP +.br .RS 4 .ad l [ \fB--ignorelockingfailure\fP ] .br -[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ] +[ \fB--checkcomplete\fP ] +.br +[ \fB--vgonline\fP ] +.br +[ \fB--udevoutput\fP ] +.br +[ COMMON_OPTIONS ] .ad b .RE .P +\(em +.P +Record that a PV is online and list LVs using the PV. +.br +.P +\fBpvscan\fP \fB--cache\fP \fB--listlvs\fP \fIPV\fP +.br +.RS 4 +.ad l +[ \fB--ignorelockingfailure\fP ] +.br +[ \fB--checkcomplete\fP ] +.br +[ \fB--vgonline\fP ] +.br +[ COMMON_OPTIONS ] +.ad b +.RE +.P +\(em +.P +List LVs using the PV. +.br +.P +\fBpvscan\fP \fB--listlvs\fP \fIPV\fP +.br +.RS 4 +.ad l +[ COMMON_OPTIONS ] +.ad b +.RE +.P +\(em +.P +List the VG using the PV. +.br +.P +\fBpvscan\fP \fB--listvg\fP \fIPV\fP +.br +.RS 4 +.ad l +[ COMMON_OPTIONS ] +.ad b +.RE +.P +\(em +.P Common options for lvm: . .RS 4 @@ -154,6 +314,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -183,6 +345,15 @@ Auto-activate LVs in a VG when the PVs scanned have completed the VG. Scan one or more devices and record that they are online. . .HP +\fB--checkcomplete\fP +.br +Check if all the devices used by a VG or LV are present, +and print "complete" or "incomplete" for each listed +VG or LV. This option is used as a part of event-based +autoactivation, so pvscan will do nothing if this option +is set and event_activation=0 in the config settings. +. +.HP \fB--commandprofile\fP \fIString\fP .br The command profile to use for command configuration. @@ -241,6 +412,26 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP +\fB--listlvs\fP +.br +Print a list of LVs that use the device. +. +.HP +\fB--listvg\fP +.br +Print the VG that uses the device. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. @@ -323,6 +514,11 @@ error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't. . .HP +\fB--udevoutput\fP +.br +Command output is modified to be imported from a udev rule. +. +.HP \fB-u\fP|\fB--uuid\fP .br Show UUIDs in addition to device names. @@ -339,6 +535,12 @@ of messages sent to stdout and stderr. Display version information. . .HP +\fB--vgonline\fP +.br +The first command to see a complete VG will report it uniquely. +Other commands to see the complete VG will report it differently. +. +.HP \fB-y\fP|\fB--yes\fP .br Do not prompt for confirmation interactively but always assume the diff --git a/man/vgcfgbackup.8_pregen b/man/vgcfgbackup.8_pregen index ae9b476f5..5e658093a 100644 --- a/man/vgcfgbackup.8_pregen +++ b/man/vgcfgbackup.8_pregen @@ -81,6 +81,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -165,6 +167,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgcfgrestore.8_pregen b/man/vgcfgrestore.8_pregen index 2c4d18e30..695e05582 100644 --- a/man/vgcfgrestore.8_pregen +++ b/man/vgcfgrestore.8_pregen @@ -31,6 +31,8 @@ vgcfgrestore \(em Restore volume group configuration \fB--force\fP .br \fB-h\fP|\fB--help\fP +.br + \fB--journal\fP \fIString\fP .br \fB-l\fP|\fB--list\fP .br @@ -164,6 +166,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -244,6 +248,16 @@ thin pool kernel metadata precisely. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB-l\fP|\fB--list\fP .br List metadata backup and archive files pertaining to the VG. diff --git a/man/vgchange.8_pregen b/man/vgchange.8_pregen index 19797daa4..05c67aead 100644 --- a/man/vgchange.8_pregen +++ b/man/vgchange.8_pregen @@ -52,6 +52,8 @@ vgchange \(em Change volume group attributes \fB--ignorelockingfailure\fP .br \fB--ignoremonitoring\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -421,6 +423,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -601,6 +605,16 @@ Do not interact with dmeventd unless --monitor is specified. Do not use this if dmeventd is already monitoring a device. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgck.8_pregen b/man/vgck.8_pregen index 5e575f6f7..a8fa33f4b 100644 --- a/man/vgck.8_pregen +++ b/man/vgck.8_pregen @@ -72,6 +72,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -137,6 +139,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgconvert.8_pregen b/man/vgconvert.8_pregen index baf3b5bdd..4d54c2b27 100644 --- a/man/vgconvert.8_pregen +++ b/man/vgconvert.8_pregen @@ -67,6 +67,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -153,6 +155,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--labelsector\fP \fINumber\fP .br By default the PV is labelled with an LVM2 identifier in its second diff --git a/man/vgcreate.8_pregen b/man/vgcreate.8_pregen index b0d9a04de..9bb8d3868 100644 --- a/man/vgcreate.8_pregen +++ b/man/vgcreate.8_pregen @@ -107,6 +107,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -235,6 +237,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--labelsector\fP \fINumber\fP .br By default the PV is labelled with an LVM2 identifier in its second diff --git a/man/vgdisplay.8_pregen b/man/vgdisplay.8_pregen index 50fb24bd6..9c694921d 100644 --- a/man/vgdisplay.8_pregen +++ b/man/vgdisplay.8_pregen @@ -105,6 +105,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -217,6 +219,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgexport.8_pregen b/man/vgexport.8_pregen index 429483894..a87058946 100644 --- a/man/vgexport.8_pregen +++ b/man/vgexport.8_pregen @@ -93,6 +93,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -162,6 +164,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgextend.8_pregen b/man/vgextend.8_pregen index 6a7ab2bee..2b2650527 100644 --- a/man/vgextend.8_pregen +++ b/man/vgextend.8_pregen @@ -85,6 +85,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -176,6 +178,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--labelsector\fP \fINumber\fP .br By default the PV is labelled with an LVM2 identifier in its second diff --git a/man/vgimport.8_pregen b/man/vgimport.8_pregen index 70f8b76f6..5cd8fab84 100644 --- a/man/vgimport.8_pregen +++ b/man/vgimport.8_pregen @@ -81,6 +81,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -157,6 +159,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgimportclone.8_pregen b/man/vgimportclone.8_pregen index 9bc8a4654..bf0af5841 100644 --- a/man/vgimportclone.8_pregen +++ b/man/vgimportclone.8_pregen @@ -62,6 +62,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -147,6 +149,16 @@ will not be changed (nor will their associated PVs). Add devices to the devices file. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgimportdevices.8_pregen b/man/vgimportdevices.8_pregen index 30bbb906e..5897e29ad 100644 --- a/man/vgimportdevices.8_pregen +++ b/man/vgimportdevices.8_pregen @@ -86,6 +86,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -161,6 +163,16 @@ See \fBlvmsystemid\fP(7) for more information about foreign VGs. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgmerge.8_pregen b/man/vgmerge.8_pregen index f98ad7403..a36e0c7bd 100644 --- a/man/vgmerge.8_pregen +++ b/man/vgmerge.8_pregen @@ -59,6 +59,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -130,6 +132,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB-l\fP|\fB--list\fP .br Display merged destination VG like vgdisplay -v. diff --git a/man/vgmknodes.8_pregen b/man/vgmknodes.8_pregen index 7432befb0..0a03e1582 100644 --- a/man/vgmknodes.8_pregen +++ b/man/vgmknodes.8_pregen @@ -66,6 +66,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -137,6 +139,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgreduce.8_pregen b/man/vgreduce.8_pregen index 1b897a6d3..f3178a618 100644 --- a/man/vgreduce.8_pregen +++ b/man/vgreduce.8_pregen @@ -31,6 +31,8 @@ vgreduce \(em Remove physical volume(s) from a volume group \fB-f\fP|\fB--force\fP .br \fB-h\fP|\fB--help\fP +.br + \fB--journal\fP \fIString\fP .br \fB--lockopt\fP \fIString\fP .br @@ -144,6 +146,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -226,6 +230,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgremove.8_pregen b/man/vgremove.8_pregen index 0b6ebb522..779c0f13e 100644 --- a/man/vgremove.8_pregen +++ b/man/vgremove.8_pregen @@ -67,6 +67,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -138,6 +140,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgrename.8_pregen b/man/vgrename.8_pregen index c600a3fcf..d3e776ca4 100644 --- a/man/vgrename.8_pregen +++ b/man/vgrename.8_pregen @@ -85,6 +85,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -162,6 +164,16 @@ Use with extreme caution. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgs.8_pregen b/man/vgs.8_pregen index 63d1c7dc3..ee5083a93 100644 --- a/man/vgs.8_pregen +++ b/man/vgs.8_pregen @@ -102,6 +102,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -201,6 +203,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgscan.8_pregen b/man/vgscan.8_pregen index bd554fa82..824e7f673 100644 --- a/man/vgscan.8_pregen +++ b/man/vgscan.8_pregen @@ -59,6 +59,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -130,6 +132,16 @@ Allows a command to continue with read-only metadata operations after locking failures. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. diff --git a/man/vgsplit.8_pregen b/man/vgsplit.8_pregen index f45cfcabc..065c8b52a 100644 --- a/man/vgsplit.8_pregen +++ b/man/vgsplit.8_pregen @@ -102,6 +102,8 @@ Common options for lvm: .br [ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .br +[ \fB--journal\fP \fIString\fP ] +.br [ \fB--lockopt\fP \fIString\fP ] .br [ \fB--longhelp\fP ] @@ -198,6 +200,16 @@ For testing and debugging. Display help text. . .HP +\fB--journal\fP \fIString\fP +.br +Record information in the systemd journal. +This information is in addition to information +enabled by the lvm.conf log/journal setting. +command: record information about the command. +output: record the default command output. +debug: record full command debugging. +. +.HP \fB--lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd.