man: regenerate

man/lvchange.8_pregen

@@ -1176,9 +1176,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvconvert.8_pregen

@@ -1788,9 +1788,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvcreate.8_pregen

@@ -1944,9 +1944,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvdisplay.8_pregen

@@ -497,9 +497,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvextend.8_pregen

@@ -652,9 +652,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvm-fullreport.8_pregen

@@ -462,9 +462,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvm-lvpoll.8_pregen

@@ -246,9 +246,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvmconfig.8_pregen

@@ -469,9 +469,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvmdiskscan.8_pregen

@@ -221,9 +221,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvreduce.8_pregen

@@ -323,9 +323,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvremove.8_pregen

@@ -314,9 +314,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvrename.8_pregen

@@ -250,9 +250,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvresize.8_pregen

@@ -587,9 +587,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvs.8_pregen

@@ -493,9 +493,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/lvscan.8_pregen

@@ -257,9 +257,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvchange.8_pregen

@@ -366,9 +366,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvck.8_pregen

@@ -548,9 +548,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvcreate.8_pregen

@@ -479,9 +479,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvdisplay.8_pregen

@@ -484,9 +484,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvmove.8_pregen

@@ -356,9 +356,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvremove.8_pregen

@@ -232,9 +232,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvresize.8_pregen

@@ -227,9 +227,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvs.8_pregen

@@ -483,9 +483,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/pvscan.8_pregen

@@ -397,9 +397,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgcfgbackup.8_pregen

@@ -278,9 +278,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgcfgrestore.8_pregen

@@ -362,9 +362,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgchange.8_pregen

@@ -1079,9 +1079,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgck.8_pregen

@@ -252,9 +252,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgconvert.8_pregen

@@ -294,9 +294,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgcreate.8_pregen

@@ -497,9 +497,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgdisplay.8_pregen

@@ -467,9 +467,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgexport.8_pregen

@@ -277,9 +277,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgextend.8_pregen

@@ -363,9 +363,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgimport.8_pregen

@@ -275,9 +275,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgimportclone.8_pregen

@@ -230,9 +230,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgmerge.8_pregen

@@ -217,9 +217,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgmknodes.8_pregen

@@ -252,9 +252,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgreduce.8_pregen

@@ -382,9 +382,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgremove.8_pregen

@@ -269,9 +269,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgrename.8_pregen

@@ -256,9 +256,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgs.8_pregen

@@ -464,9 +464,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgscan.8_pregen

@@ -239,9 +239,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES

man/vgsplit.8_pregen

@@ -332,9 +332,8 @@ Input units are always treated as base two values, regardless of
 capitalization, e.g. 'k' and 'K' both refer to 1024.
 The default input unit is specified by letter, followed by |UNIT.
 UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
-b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
-m|M is megabytes, g|G is gigabytes, t|T is terabytes,
-p|P is petabytes, e|E is exabytes.
+b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB,
+m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
 (This should not be confused with the output control --units, where
 capital letters mean multiple of 1000.)
 .SH ENVIRONMENT VARIABLES