Several changes in udev rules:

- add DM_UDEV_RULES_VSN to provide a variable to be checked for in the other
  rules (e.g. to check that DM rules are actually installed, we can alternate
  functionality in the other rules based on this information, also we have
  versioning support for the rules)
- set proper sbin path for dmsetup and blkid, /sbin first, then /usr/sbin.
  This is necessary for anaconda to work properly.
- add 'last_rule' for cryptsetup's temporary devices (symlinks in /dev/mapper
  only)

WHATS_NEW

@@ -1,5 +1,6 @@
 Version 2.02.52 -
 =================================
+  Add DM_UDEV_RULES_VSN udev enviroment variable.
   Check that udev is running and set internal state appropriately.
   Add libudev configuration check.
   Add lvm2app.sh to nightly tests conditional upon configure --enable-applib.

udev/10-dm.rules.in

@@ -8,11 +8,18 @@
 #   DM_NAME - actual DM device's name
 #   DM_UUID - UUID set for DM device (blank if not specified)
 #   DM_SUSPENDED - suspended state of DM device (0 or 1)
+#   DM_UDEV_RULES_VSN - DM udev rules version
 
 KERNEL=="device-mapper", NAME="(DM_DIR)/control"
 
 SUBSYSTEM!="block", GOTO="dm_end"
 KERNEL!="dm-[0-9]*", GOTO="dm_end"
+
+# Set proper sbin path, /sbin has higher priority than /usr/sbin.
+ENV{DM_SBIN_PATH}="/sbin"
+TEST!="$env{DM_SBIN_PATH}/dmsetup", ENV{DM_SBIN_PATH}="/usr/sbin"
+TEST!="$env{DM_SBIN_PATH}/dmsetup", GOTO="dm_end"
+
 ACTION!="add|change", GOTO="dm_end"
 
 # Normally, we operate on "change" events only. But when
@@ -30,8 +37,8 @@ ACTION=="add", ENV{STARTUP}!="1", NAME="", GOTO="dm_end"
 # so we also have to call dmsetup if the kernel version used
 # is in between these releases.
 TEST=="dm", ENV{DM_NAME}="$attr{dm/name}", ENV{DM_UUID}="$attr{dm/uuid}", ENV{DM_SUSPENDED}="$attr{dm/suspended}"
-TEST!="dm", IMPORT{program}="/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o name,uuid,suspended"
-ENV{DM_SUSPENDED}!="?*", IMPORT{program}="/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o suspended"
+TEST!="dm", IMPORT{program}="$env{DM_SBIN_PATH}/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o name,uuid,suspended"
+ENV{DM_SUSPENDED}!="?*", IMPORT{program}="$env{DM_SBIN_PATH}/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o suspended"
 
 # dmsetup tool provides suspended state information in textual
 # form with values "Suspended"/"Active". We translate it to
@@ -39,6 +46,26 @@ ENV{DM_SUSPENDED}!="?*", IMPORT{program}="/sbin/dmsetup info -j %M -m %m -c --na
 ENV{DM_SUSPENDED}=="Active", ENV{DM_SUSPENDED}="0"
 ENV{DM_SUSPENDED}=="Suspended", ENV{DM_SUSPENDED}="1"
 
+# This variable provides a reliable way to check that device-mapper
+# rules were installed. It means that all needed variables are set
+# by these rules directly so there's no need to acquire them again
+# later. Other rules can alternate the functionality based on this
+# fact (e.g. fallback to rules that behave correctly even without
+# these rules installed). It also provides versioning for any
+# possible future changes.
+ENV{DM_UDEV_RULES_VSN}="1"
+
 ENV{DM_NAME}=="?*", NAME="$kernel", SYMLINK+="(DM_DIR)/$env{DM_NAME}"
 
+# We have to ignore further rule application for temporary
+# cryptsetup devices. But don't forget to send the notification!
+ENV{DM_UUID}=="CRYPT-TEMP-?*", GOTO="dm_last_rule"
+ENV{DM_UUID}!="?*", ENV{DM_NAME}=="temporary-cryptsetup-?*", GOTO="dm_last_rule"
+
+GOTO="dm_end"
+
+LABEL="dm_last_rule"
+ENV{DM_COOKIE}=="?*", RUN+="$env{DM_SBIN_PATH}/dmsetup udevcomplete $env{DM_COOKIE}"
+OPTIONS+="last_rule"
+
 LABEL="dm_end"

udev/11-lvm.rules

@@ -11,6 +11,7 @@
 SUBSYSTEM!="block", GOTO="lvm_end"
 KERNEL!="dm-[0-9]*", GOTO="lvm_end"
 ACTION!="add|change", GOTO="lvm_end"
+ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="lvm_end"
 ENV{DM_UUID}!="LVM-?*", GOTO="lvm_end"
 
 # Normally, we operate on "change" events only. But when
@@ -20,11 +21,10 @@ ENV{DM_UUID}!="LVM-?*", GOTO="lvm_end"
 ACTION=="add", ENV{STARTUP}!="1", GOTO="lvm_end"
 
 # Use DM name and split it up into its VG/LV/layer constituents.
-IMPORT{program}="/sbin/dmsetup splitname --nameprefixes --noheadings --rows $env{DM_NAME}"
+IMPORT{program}="$env{DM_SBIN_PATH}/dmsetup splitname --nameprefixes --noheadings --rows $env{DM_NAME}"
 
 # Do not create symlinks for hidden subdevices.
-ENV{DM_LV_NAME}=="?*_mlog", GOTO="lvm_end"
-ENV{DM_LV_NAME}=="?*_mimage_[0-9]*", GOTO="lvm_end"
+ENV{DM_LV_NAME}=="?*_mimage_[0-9]*|pvmove?*|?*_vorigin", GOTO="lvm_end"
 
 # Create symlinks for top-level devices only.
 ENV{DM_VG_NAME}=="?*", ENV{DM_LV_NAME}=="?*", ENV{DM_LV_LAYER}!="?*", SYMLINK+="$env{DM_VG_NAME}/$env{DM_LV_NAME}"

udev/12-dm-disk.rules

@@ -8,7 +8,7 @@
 SUBSYSTEM!="block", GOTO="dm_end"
 KERNEL!="dm-[0-9]*", GOTO="dm_end"
 ACTION!="add|change", GOTO="dm_end"
-ENV{DM_NAME}!="?*", GOTO="dm_end"
+ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_end"
 
 # Normally, we operate on "change" events only. But when
 # coldplugging, there's an "add" event present. We have to
@@ -21,7 +21,7 @@ ENV{DM_UUID}=="?*", SYMLINK+="disk/by-id/dm-uuid-$env{DM_UUID}"
 
 ENV{DM_SUSPENDED}=="1", GOTO="dm_end"
 
-IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
+IMPORT{program}="$env{DM_SBIN_PATH}/blkid -o udev -p $tempnode"
 OPTIONS="link_priority=-100"
 ENV{DM_LV_LAYER}=="?*", OPTIONS="link_priority=-90"
 ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"

udev/12-dm-permissions.rules

@@ -2,6 +2,7 @@
 #
 # These rules set permissions for DM devices. There are some environment
 # variables set that can be used:
+#   DM_UDEV_RULES_VSN - DM udev rules version
 #   DM_NAME - actual DM device's name
 #   DM_UUID - UUID set for DM device (blank if not specified)
 #   DM_SUSPENDED - suspended state of DM device (0 or 1)
@@ -12,6 +13,7 @@
 SUBSYSTEM!="block", GOTO="dm_end"
 KERNEL!="dm-[0-9]*", GOTO="dm_end"
 ACTION!="change", GOTO="dm_end"
+ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_end"
 
 #ENV{DM_NAME}=="my_device", OWNER:="peter", GROUP:="peter", MODE:="644"
 

udev/95-dm-notify.rules

@@ -11,6 +11,6 @@ KERNEL!="dm-[0-9]*", GOTO="dm_end"
 ACTION!="change|remove", GOTO="dm_end"
 
 ACTION=="change", OWNER:="root", GROUP:="root", MODE:="600"
-ENV{DM_COOKIE}=="?*", RUN+="/sbin/dmsetup udevcomplete $env{DM_COOKIE}"
+ENV{DM_COOKIE}=="?*", RUN+="$env{DM_SBIN_PATH}/dmsetup udevcomplete $env{DM_COOKIE}"
 
 LABEL="dm_end"