IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
New config setting sanlock_align_size can be used to configure
the sanlock lease size that lvmlockd will use on 4K disks.
By default, lvmlockd and sanlock use 8MiB align_size (lease size)
on 4K disks, which supports up to 2000 hosts (and max host_id.)
This can be reduced to 1, 2 or 4 (in MiB), to reduce lease i/o.
The reduced sizes correspond to smaller max hosts/host_id:
1 MiB = 250 hosts
2 MiB = 500 hosts
4 MiB = 1000 hosts
8 MiB = 2000 hosts (default)
(Disks with 512 byte sectors always use 1MiB leases and support
2000 hosts/host_id, and are not affected by this.)
Previously, lvmlockd detected the end of the lvmlock LV
by doing i/o to it until an i/o error was returned.
This triggered sanlock warning messages, so use the LV
size to avoid accessing beyond the end of the device.
Previously, every lvcreate would refresh the lvmlock LV
in case another machine had extended it. This involves
a lot of unnecessary work in most cases, so now compare
the LV size and device size to detect when a refresh is
needed.
vgchange --lockstop will fail with EBUSY if orphan locks in the
lock manager prevent stopping the lockspace. The orphan locks
can then be adopted and released, and the lockspace then stopped
cleanly.
Lock adoption is not part of standard command behavior, but can
be used for manual recovery or cleanup from unexpected failure
cases. Like other lockopt values, they are hidden options for
--lockopt. Different lock managers will behave differently.
Adopting locks with lvmlockd -A1 is more accurate and automatic.
--lockopt adoptls
. for vgchange --lockstart
. adopt existing ls, or fail if no existing lockspace is found
--lockopt adoptgl | adoptvg | adoptlv
. for commands using lvmlockd locks
. adopt orphan gl/vg/lv lock, or fail the lock request if
no orphan lock is found
. will fail if orphan lock exists with a different lock mode
. command may still continue with a failed shared lock request
--lockopt adopt
. for lockstart or any command using lvmlockd locks
. adopt existing lockspace, or start lockspace if none exists
. adopt orphan gl/vg/lv lock, or acquire new lock if no orphan found
. will fail if orphan lock exists with a different lock mode
. command may still continue with a failed shared lock request
. with dlm this option only works for ls
The lvb is used to hold lock versions, but lock verions are
no longer used (since the removal of lvmetad), so the lvb
is not actually useful. Disable their use for sanlock to
avoid the extra i/o required to maintain the lvb.
Enums are single 'values' so not a proper type for bitfields.
(Probably better to use such values as defines).
Although here 'daemon_talk()' is part of library API, it's hidden
non-public API call - and moreover 'enum' and 'unsigned' are
using the same size, so linker shouldn't have any issue with
this symbol usage.
For this reason there are no 'versioning' tricks applied.
Create leading dirs for lvmdbusd lock file, otherwise it fails to start:
| systemd[1]: Starting LVM2 D-Bus service...
| lvmdbusd[1602]: [1602]: Error during creation of lock file(/var/lock/lvm/lvmdbusd): errno(2), exiting!
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Attach -Wl,-z,relro,-z,now,-z,pack-relative-relocs,--as-needed
to LDFLAGS, but only if LDFLAGS already doesn't contain 'relro'
(so it's not given repeatedly).
Also start to use -z,now linkage also when building libraries
with default compilation - this avoid calling symbol resolver
while library function are using function needing resolving.
Note: Fedora or RHEL rpm building is using:
CFLAGS=$(rpm --eval %{build_cflags})
LDFLAGS=$(rpm --eval %{build_ldflags})
Also split -DUSE_SD_NOTIFY into DEFS from CFLAGS.
Refactor _start_daemon and add synchronization delay waiting
untill new forked dmeventd actually open fifos and is ready
to process messages.
This closes some race window in testing.
When no lock manager for the global lock had been set yet,
and the first global lock request was received, and both
dlm and sanlock were running, lvmlockd would assume it
should use the dlm for the global lock, and would start
the "lvm_global" dlm lockspace automatically. That's
not always correct, so don't assume the dlm should be used,
fail the lock request, and wait until a VG with a specific
lock type is started to determine the lock manager to use.
Move static to main() local vars.
Initilize libdm logging also before starting _restart_dmeventd()
so function there can be also logged.
Move call of _info_dmevent() out of option processing - so some
options like -V are processed with higher priority.
Use _restart_dmeventd() with return values 0,1,2.
Also let's use already created fifos struct.
Make sure the _systemd_activation variable is properly initialized
from _systemd_handover before calling _restart_dmeventd() as
this variable is used there to decide where 1 or 2 should
be returned - aka either letting systemd to initilize
or restart dmeventd itself.
Before initiation fifo communication, check whether there is
running dmeventd - in case there is no running instance, this
would be just blocked for 5 seconds trying to open fifo.
