IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Reinstantiate reporting of metadata percent usage for cache volumes.
Also show the same percentage with hidden cache-pool LV.
This regression was caused by optimization for a single-ioctl in
2.02.155.
With patches that will follow, this will make it possible to widen log
report coverage when commands are executed from lvm shell so the amount
of messages that may end up in stderr/stdout instead of log report are
minimized.
Simplify code around _do_get_report_selection - remove "expected_idxs[]"
argument which is superfluous and add "allow_single" switch instead to
allow for recognition of "--configreport <report_name> -S" as well as
single "-S" if needed.
Null pointer dereferences (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 961 in _do_report_get_selection()
Null pointer dereferences (FORWARD_NULL) Dereferencing null pointer "single_args".
This patch adds structures and functions to reroute error and warning
logs to log report, if it's set.
There are 5 new functions:
- log_set_report
Set log report where logging will be rerouted.
- log_set_report_context
Set context globally so any report_cmdlog call will use it.
- log_set_report_object_type
Set object type globally so any report_cmdlog call will use it.
- log_set_report_object_name_and_id
Set object ID and name globally so any report_cmdlog call will use it.
- log_set_report_object_group_and_group_id
Set object group ID and name globally so any report_cmdlog call will use it.
These functions will be called during LVM command processing so any logs
which are rerouted to log report contain proper information about current
processing state.
lvm fullreport executes 5 subreports (vg, pv, lv, pvseg, seg) per each VG
(and so taking one VG lock each time) within one command which makes it
easier to produce full report about LVM entities.
Since all 5 subreports for a VG are done under a VG lock, the output is
more consistent mainly in cases where LVM entities may be changed in
parallel.
Add new --reportformat option and new report_format_init function that
checks this option and creates new report group accordingly, also
preparing log report handle and adding it to the report group just
created.
This is a preparation for new CMDLOG report type which is going to be
used for reporting LVM command log.
The new report type introduces several new fields (log_seq_num, log_type,
log_context, log_object_type, log_object_group, log_object_id, object_name,
log_message, log_errno, log_ret_code) as well as new configuration settings
to set this report type (report/command_log_sort and report/command_log_cols
lvm.conf settings).
This patch also introduces internal report_cmdlog helper function
which is a wrapper over dm_report_object to report command log via
CMDLOG report type and which is going to be used throughout the code
to report the log items.
Before this fix, when reporting 'lvm devtypes', the report was
initialized with incorrect reserved values - the ones used for
pvs/vgs/lvs report were used instead of NULL value (because devtypes
doesn't have any reserved values).
For example, trying to (incorrectly) use lv_name for the -S|--select
with lvm devtypes which doesn't have this field at all:
Before this patch (internal error issued):
$ lvm devtypes -S 'lv_name=lvol0'
Internal error: _check_reserved_values_supported: field-specific reserved value of type 0x0 for field not supported
Internal error: dm_report_init_with_selection: trying to register unsupported reserved value type, skipping report selection
DevType MaxParts Description
aoe 16 ATA over Ethernet
ataraid 16 ATA Raid
bcache 1 bcache block device cache
...
With this patch applied (correct error displayed about
unrecognized selection field):
$ lvm devtypes -S 'lv_name=lvol0'
Device Types Fields
-------------------
devtype_name - Name of Device Type exactly as it appears in /proc/devices. [string]
devtype_max_partitions - Maximum number of partitions. (How many device minor numbers get reserved for each device.) [number]
devtype_description - Description of Device Type. [string]
Special Fields
--------------
selected - Set if item passes selection criteria. [number]
help - Show help. [unselectable number]
? - Show help. [unselectable number]
Unrecognised selection field: lv_name
Selection syntax error at 'lv_name=lvol0'.
Use 'help' for selection to get more help.
Convert fields into using a single status ioctl call per LV.
This is a bit tricky since when there are more complicated
stacks, at this moment its undefined which values should be shown.
It's clear we need to cache more then single ioctl per LV,
but also we need to define more explicitely relation between
reported values for snapshots.
This patch is not a final state, rather a transitional step.
It should not be giving more 'worst' values then previous
many-ioctl-calls-per-lv solution.
Add support for active cache LV.
Handle --cachemode args validation during command line processing.
Rework some lvm2 internal to use lvm2 defined CACHE_MODE enums
indepently on libdm defines and use enum around the code instead
of passing and comparing strings.
When there are duplicate devices for a PV, one device
is preferred and chosen to exist in the VG. The other
devices are not used by lvm, but are displayed by pvs
with a new PV attr "d", indicating that they are
unchosen duplicate PVs.
The "duplicate" reporting field is set to "duplicate"
when the PV is an unchosen duplicate, and that field
is blank for the chosen PV.
We don't have any report field of this type yet. Return this patch into
the play if we really need that. Currenly we always report status
(result of "status" dm ioctl) for an LV as a whole where we choose
segment which represents the LV, not calling status for each possible
segment it contains - we don't need this now so I'm removing it to
not make the code more complex uselessly.
Specifying an output width of 0 now leads to a default minimum width
taken from the width of the column heading. (Most fields should use
this.)
Components of field names are generally separated by underscores (which
are optional at run-time). (Dropped 3 duplicate fields now covered by
this rule.)
Each field heading must be unique and generally doesn't have spaces
between words (which get capitalised) unless they are already short and
the fields are normally longer or clarity demands it.
The lv_full_ancestors reporting field is just like the existing
lv_ancestors field but it also takes into account any history and
indirect relations recorded.
All names for historical LVs are prefixed with '-' character to make clear
difference between live and historical LVs. The '-' can't be set by users
for live LV names during lvcreate hence we never get into a conflict with
the names that user defines for live LVs.
The lv_historical reporting field is a simple binary field that reports
whether an LV is historical one ("historical" value or value of "1" displayed)
or not (blank string "" or value of "0" displayed).
Add new structures and new fields in existing structures to support
tracking history of LVs (the LVs which don't exist - the have been
removed already):
- new "struct historical_logical_volume"
This structure keeps information specific to historical LVs
(historical LV is very reduced form of struct logical_volume +
it contains a few specific fields to track historical LV
properties like removal time and connections among other LVs).
- new "struct generic_logical_volume"
Wrapper for "struct historical_logical_volume" and
"struct logical_volume" to make it possible to handle volumes
in uniform way, no matter if it's live or historical one.
- new "struct glv_list"
Wrapper for "struct generic_logical_volume" so it can be
added to a list.
- new "indirect_glvs" field in "struct logical_volume"
List that stores references to all indirect users of this LV - this
interconnects live LV with historical descendant LVs or even live
descendant LVs.
- new "indirect_origin" field in "struct lv_segment"
Reference to indirect origin of this segment - this interconnects
live LV (segment) with historical ancestor.
- new "this_glv" field in "struct logical_volume"
This references an existing generic_logical_volume wrapper for this
LV, if used. It can be NULL if not needed - which means we're not
handling historical LVs at all.
- new "historical_lvs" field in "struct volume group
List of all historical LVs read from VG metadata.
Pair kernel_cache_settings with kernel_cache_policy.
There is very small chance in error case that the value in table
might be differnet from the value stored in metadata
so make it 'checkable'.
Fix reporting of Fail thin-pool target status
as attr[8] letter 'F'.
Report 'needs_check' status from thin-pool target via
attr field [4] (letter 'c'/'C'), and also via CheckNeeded field.
TODO: think about better name here?
TODO: lots of prop_not_implemented_set
For example:
$ pvs -o pv_name,vg_name,pv_in_use
PV VG InUse
/dev/sda vg used
/dev/sdb
/dev/sdc used
(sda is part of vg - it's used
sdb is not part of vg - it's not used
sdc is part of vg, but MDAs missing - it's used)