IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a host failed while holding a sanlock lease,
sanlock_acquire will by default block and wait
for the lease to expire before returning. We
want it to return with an error so we can retry
instead of blocking, which allows us to process
other lock operations.
(Enclose this in an ifdef until the new flag
appears in a sanlock release.)
If lvmlockd acquires an lv lock for a command, but the
command exits before the reply, then the command has
not activated the lv and lvmlockd should unlock it.
This only applies when the lv was not already locked.
(There will always be a chance that the lv lock is held
while the lv is not active, i.e. if the command fails in
the small window between getting the lv lock and before
doing the activation. In that case, rerunning the
activation command corrects the inconsistency.)
This commit helps by automatically clearing the
inconsistency (lv locked by not activated) in the most
common case when the lv lock operation is slow to
complete and the command is canceled by the user.
This commit also adds and cleans up references to the
client id in a bunch of log messages, which is useful
to follow processing on each independent lock request.
This applies the same rule/logic to dlm VGs that has always
existed for sanlock VGs. Allowing a dlm VG to be removed
while its lockspace was still running on other hosts largely
worked, but there were difficult problems if another VG with
the same name was recreated. Forcing the VG lockspace to
be stopped, gives both sanlock and dlm VGs the same behavior.
This shortcut was added for an odd case that I do not
believe is relevant any more. Having an alternate
path for lockspace thread cleanup is a complication
that could lead to problems.
The dlm will often lose the lvb content, so we need to
check quite a few possibilities for lvb values that
were not being checked before.
Refactoring was required to pass the entire lvb value
back to the core code instead of the single value.
The only functional change should be detecting new
lvb states where metadata is now invalidated where
it wasn't before.
When an action is created by lvmlockd for itself,
there is no client to send the result to. Add
the NO_CLIENT flag to the action to skip sending
the result to a client.
Undo the part of the recent EREMOVED change which
automatically stopped the lockspace for a remotely
removed VG. It didn't always work (would not work
when lvb content was rebuilt in the dlm). This will
be handled better when the lvb content is controlled
more strictly.
Remove the optimization/shortcut for starting the dlm global
lockspace when it was already running.
Reenable automatically starting the dlm global lockspace
when a command attempts to use it and it's not yet started.
This had become disabled at some point.
Include both the VG uuid and name in the lvmetad
set_vg_info message. This works around an obscure
problem where the VG uuid in lvmlockd is wrong
when one host removes a dlm VG, then creates a new
VG with the same name. If the dlm lockspace for
the initial VG was never stopped on another host,
that other host will be using the old uuid in its
lvmetad set_vg_info message. (That can be
corrected with a larger change, but this is an
effective workaround.)
lvmlockd would fail to recognize that the global lockspace
failed to start if the dlm wasn't running, so future attempts
to start the dlm global lockspace would do nothing, thinking
it was already running.
This was only used to return two flags indicating specific
reasons for a lock failure so that a more specific error
message could be printed by the command (lockspace had been
stopped, or lockspace had an error starting.)
Remove the list, given its limited usefulness, the fact it
would easily become inaccurate, and the fact it was causing
misleading error messages. The error conditions it was meant
to help could be reported differently.
This makes lvmlockd removal steps for dlm VGs closely match
sanlock VGs. Because dlm lockspaces are not required to be
stopped on all hosts before vgremove, there is an extra bit
for dlm lockspaces, where a flag is set in the VG lock lvb
indicating that the VG was removed. If other hosts happen
to use the VG lock they will see this flag and stop their
lockspace.
Single messages sent over unix sockets are limited in
size to /proc/sys/net/core/wmem_max, so send the 1MB
debug buffer in smaller chunks to avoid EMSGSIZE.
Also look for EAGAIN and retry sending for a limited
time when the reader is slower than the writer.
Also shift the location of that code so it's the same
as other requests.
The check for other sanlock lockspaces was not checking
that the lockspace type was sanlock, so if dlm lockspaces
were visible, they were wrongly included.
This adds the infrastructure, code paths, error reporting,
etc. to handle storage errors, or storage loss, under the
sanlock leases in a VG that is being used. The loss of
storage means sanlock cannot renew its leases, which means
that the host needs to stop using the shared VG before its
leases expire.
This still requires manually shutting down a VG that has
lost lease storage, e.g. unmounting file systems,
deactivating LVs in the VG. The next step is to
automatically use a command like blkdeactivate to do that.
/lib/log/log.c:88: warning[invalidScanfArgType_int]: %llu in format string (no. 2) requires 'unsigned long long *' but the argument type is 'long long *'.
daemons/lvmlockd/lvmlockd-core.c:791: error[uninitstring]: Dangerous usage of 'version' (strncpy doesn't always null-terminate it).
The dlm global lockspace is automatically added when the
first dlm VG lockspace is added. Reverse this by removing
the dlm global lockspace after the last dlm VG lockspace
is removed. (Remove old non-working code that did this
based on an old command that could explicitly add/remove
the dlm global lockspace.)
This tries harder to avoid creating duplicate global locks in
sanlock VGs by refusing to create a new sanlock VG with a
global lock if other sanlock VGs exist that may have a gl.
When there are duplicate global locks, check if the gl
is still enabled each time a gl or vg lock is acquired
in the lockspace. Once one of the duplicates is disabled,
then other hosts will recognize that the issue is resolved
without needing to restart the lockspaces.
When lvmlockd is compiled without support for one of the
lock managers (sanlock or dlm), and a command tries to use
one of them, explain that in the error message.
lib/format1/import-export.c:167: var_deref_op: Dereferencing null pointer "vg->lvm1_system_id"
lib/cache/lvmetad.c:1023: var_deref_op: Dereferencing null pointer "this"
daemons/lvmlockd/lvmlockd-core.c:2659: check_after_deref: Null-checking "act" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
/daemons/lvmetad/lvmetad-core.c:1024: check_after_deref: Null-checking "pvmeta" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
... Using uninitialized value "lockd_state" when calling "lockd_vg"
(even though lockd_vg assigns 0 to the lockd_state, but it looks at
previous state of lockd_state just before that so we need to have
that properly initialized!)
libdm/libdm-report.c:2934: uninit_use_in_call: Using uninitialized value "tm". Field "tm.tm_gmtoff" is uninitialized when calling "_get_final_time".
daemons/lvmlockd/lvmlockctl.c:273: uninit_use_in_call: Using uninitialized element of array "r_name" when calling "format_info_r_action". (just added FIXME as this looks unfinished?)
lib/log/log.c:115: leaked_storage: Variable "st" going out of scope leaks the storage it points to
daemons/lvmpolld/lvmpolld-core.c:573: leaked_storage: Variable "cmdargv" going out of scope leaks the storage it points to
daemons/lvmlockd/lvmlockd-core.c:5341: leaked_handle: Handle variable "fd" going out of scope leaks the handle
daemons/lvmlockd/lvmlockctl.c:575: overwrite_var: Overwriting "able_vg_name" in "able_vg_name = strdup(optarg)" leaks the storage that "able_vg_name" points to
daemons/lvmlockd/lvmlockctl.c:571: overwrite_var: Overwriting "able_vg_name" in "able_vg_name = strdup(optarg)" leaks the storage that "able_vg_name" points to
daemons/lvmlockd/lvmlockctl.c:385: leaked_handle: Handle variable "s" going out of scope leaks the handle
