IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Move the lvm1 sys ID into vg->lvm1_system_id and reenable the #if 0
LVM1 code. Still display the new-style system ID in the same
reporting field, though, as only one can be set.
Add a format feature flag FMT_SYSTEM_ON_PVS for LVM1 and disallow
access to LVM1 VGs if a new-style system ID has been set.
Treat the new vg->system_id as const.
Allow cmd->unknown_system_id to be cleared during toolcontext
refresh.
Set a default value of "none" for global/system_id_source.
Allow local/system_id to be empty so it's not impossible for
a later config file to remove it.
In a file containing a system ID:
Any whitespace at the start of a line is ignored;
Blank lines are ignored;
Any characters after a # are ignored along with the #.
The system ID is obtained by processing the first line with
non-ignored characters.
If further lines with non-ignored characters follow, a warning is
issued.
Add WARNING messages if there are problems setting the requested
system ID.
Ban "localhost" as a prefix regardless of the system_id_source.
Use cmd->hostname instead of calling uname again.
Make system_id_source values case-insensitive (as with new settings like
log_debug_classes) and also accept machine-id to match the filename.
Require system ID to begin with an alphanumeric character.
Rename fn to make clear it's only validation for systemid
and always terminate result rather than imposing this on the caller.
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it. "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
Just like MD filtering that detects components of software RAID (md),
add detection for firmware RAID.
We're not adding any native code to detect this - there are lots of
firmware RAIDs out there which is just out of LVM scope. However,
with current changes with which we're able to get device info from
external sources (e.g. external_device_info_source="udev"), we can
do this easily if the external device status source has this kind
of information - which is the case of "udev" source where the results
of blkid scans are stored.
This detection should cover all firmware RAIDs that blkid can detect and
which are identified as:
ID_FS_TYPE = {adaptec,ddf,hpt45x,hpt37x,isw,jmicron,lsi_mega,nvidia,promise_fasttrack,silicon_medley,via}_raid_member
Composite filter is a filter that can put several filters in one set.
This patch adds a switch when creating the composite filter which will
enable or disable external device info handles for all the filters
the composite filter encompasses.
We want to use this external device info for majority of the filters
which are in the "lvmetad filter chain" (or the respective part if
we're not using lvmetad).
Following patches will use the enabled external device handle in
concrete filters from the composite filter...
There are actually three filter chains if lvmetad is used:
- cmd->lvmetad_filter used when when scanning devices for lvmetad
- cmd->filter used when processing lvmetad responses
- cmd->full_fiilter (which is just cmd->lvmetad_filter + cmd->filter chained together) used
for remaining situations
This patch adds the third one - "cmd->full_filter" - currently this is
used if device processing does not fall into any of the groups before,
for example, devices which does not have the PV label yet and we're just
creating a new one or we're processing the devices where the list of the
devices (PVs) is not returned by lvmetad initially.
Currently, the cmd->full_filter is used exactly in these functions:
- lvmcache_label_scan
- _pvcreate_check
- pvcreate_vol
- lvmdiskscan
- pvscan
- _process_each_label
If lvmetad is used, then simply cmd->full_filter == cmd->filter because
cmd->lvmetad_filter is NULL in this case.
We need to use proper filter chain when we disable lvmetad use
explicitly in the code by calling lvmetad_set_active(0) while
overriding existing configuration. We need to reinitialize filters
in this case so proper filter chain is used. The same applies
for the other way round - when we enable lvmetad use explicitly in
the code (though this is not yet used).
With this change, the filter chains used look like this now:
A) When *lvmetad is not used*:
- persistent filter -> regex filter -> sysfs filter ->
global regex filter -> type filter ->
usable device filter(FILTER_MODE_NO_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
B) When *lvmetad is used* (two separate filter chains):
- the lvmetad filter chain used when scanning devs for lvmetad update:
sysfs filter -> global regex filter -> type filter ->
usable device filter(FILTER_MODE_PRE_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
- the filter chain used for lvmetad responses:
persistent filter -> usable device filter(FILTER_MODE_POST_LVMETAD) ->
regex filter
Caused by recent changes - a7be3b12df.
If global filter was not defined, then part of the code
creating composite filter (the cmd->lvmetad_filter) incorrectly
increased index value even if this global filter was not created
as part of the composite filter. This caused a gap with "NULL"
value in the composite filter array which ended up with the rest
of the filters after the gap to be ignored and also it caused a mem
leak when destroying the composite filter.
If a PV label is exposed both through a composite device (MD for example) and
through its component devices, we always want the PV that lvmetad sees to be the
composite, since this is what all LVM commands (including activation) will then
use. If pvscan --cache is triggered for multiple clones of the same PV, the last
to finish wins. This patch basically re-arranges the filters so that
component-device filters are part of the global_filter chain, not of the
client-side filter chain. This has a subtle effect on filter evaluation order,
but should not alter visible semantics in the non-lvmetad case.
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).
Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.
This makes it easier to use and check lvm reporting command output in scripts.
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
- When defining configuration source, the code now uses separate
CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
(before, it was just CONFIG_PROFILE that did not make the
difference between the two). This helps when checking the
configuration if it contains correct set of options which
are all in either command-profilable or metadata-profilable
group without mixing these groups together - so it's a firm
distinction. The "command profile" can't contain
"metadata profile" and vice versa! This is strictly checked
and if the settings are mixed, such profile is rejected and
it's not used. So in the end, the CONFIG_PROFILE_COMMAND
set of options and CONFIG_PROFILE_METADATA are mutually exclusive
sets.
- Marking configuration with one or the other marker will also
determine the way these configuration sources are positioned
in the configuration cascade which is now:
CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES
- Marking configuration with one or the other marker will also make
it possible to issue a command context refresh (will be probably
a part of a future patch) if needed for settings in global profile
set. For settings in metadata profile set this is impossible since
we can't refresh cmd context in the middle of reading VG/LV metadata
and for each VG/LV separately because each VG/LV can have a different
metadata profile assinged and it's not possible to change these
settings at this level.
- When command profile is incorrect, it's rejected *and also* the
command exits immediately - the profile *must* be correct for the
command that was run with a profile to be executed. Before this
patch, when the profile was found incorrect, there was just the
warning message and the command continued without profile applied.
But it's more correct to exit immediately in this case.
- When metadata profile is incorrect, we reject it during command
runtime (as we know the profile name from metadata and not early
from command line as it is in case of command profiles) and we
*do continue* with the command as we're in the middle of operation.
Also, the metadata profile is applied directly and on the fly on
find_config_tree_* fn call and even if the metadata profile is
found incorrect, we still need to return the non-profiled value
as found in the other configuration provided or default value.
To exit immediately even in this case, we'd need to refactor
existing find_config_tree_* fns so they can return error. Currently,
these fns return only config values (which end up with default
values in the end if the config is not found).
- To check the profile validity before use to be sure it's correct,
one can use :
lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate
(the --commandprofile/--metadataprofile for dumpconfig will come
as part of the subsequent patch)
- This patch also adds a reference to --commandprofile and
--metadataprofile in the cmd help string (which was missing before
for the --profile for some commands). We do not mention --profile
now as people should use --commandprofile or --metadataprofile
directly. However, the --profile is still supported for backward
compatibility and it's translated as:
--profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
(as these commands are able to attach profile to metadata)
--profile == --commandprofile for all the other commands
(--metadataprofile is not allowed there as it makes no sense)
- This patch also contains some cleanups to make the code handling
the profiles more readable...
When cmd refresh is called, we need to move any already loaded profiles
to profiles_to_load list which will cause their reload on subsequent
use. In addition to that, we need to take into account any change
in config/profile configuration setting on cmd context refresh
since this setting could be overriden with --config.
Also, when running commands in the shell, we need to remove the
global profile used from the configuration cascade so the profile
is not incorrectly reused next time when the --profile option is
not specified anymore for the next command in the shell.
This bug only affected profile specified by --profile cmd line
arg, not profiles referenced from LVM metadata.
Before, the cft_check_handle used to direct configuration checking
was part of cmd_context. It's better to attach this as part of the
exact config tree against which the check is done. This patch moves
the cft_check_handle out of cmd_context and it attaches it to the
config tree directly as dm_config_tree->custom->config_source->check_handle.
This change makes it easier to track the config tree check results
and provides less space for bugs as the results are directly attached
to the tree and we don't need to be cautious whether the global value
is correct or not (and whether it needs reinitialization) as it was
in the case when the cft_check_handle was part of cmd_context.
When lvm2 command works with clvmd and uses locking in wrong way,
it may 'leak' certain file descriptors in opened (incorrect) state.
dev_cache_exit then destroys memory pool of cached devices, while
_open_devices list in dev-io.c was still referencing them if they
were still opened.
Patch properly calls _close() function to 'self-heal' from this
invalid state, but it will report internal error (so execution
with abort_on_internal_error causes immediate death). On the
normal 'execution', error is only reported, but memory state is
corrected, and linked list is not referencing devices from
released mempool.
For crash see: https://bugzilla.redhat.com/show_bug.cgi?id=1073886
Since commit f12ee43f2e call destroy,
it start to check all VGs are unlocked. However when we become_daemon,
we simply reset locking (since lock is still kept by parent process).
So implement a simple 'reset' flag.
The global/suffix was missing from example lvm.conf but it can
be very useful when using lvm in scripts and now in profiles as well
Let's expose it more.
The devices/cache and devices/cache_dir are evaluated in runtime this way:
- if devices/cache is set, use it
- if devices_cache/dir or devices/cache_file_prefix is set, make up a
path out of that for devices/cache in runtime, taking into account
the LVM_SYSTEM_DIR environment variable if set
- otherwise make up the path out of default which is:
<LVM_SYSTEM_DIR>/<cache_dir>/<cache_file_prefix>.cache
With the runtime defaults, we can encode this easily now. Also, the lvm
dumpconfig can show proper and exact information about this setting then
(the variant that shows default values).
Using mempool is much safer than using the global static variable.
The global variable would be rewritten on each find_config_tree_* call
and we need to be very careful not to get into this problem (we don't
do now, but we can with the patches for "runtime defaults" that will follow).
This patch adds the new cachepool segment type - the first of two
necessary to eventually create 'cache' logical volumes. In addition
to the new segment type, updates to makefiles, configure files, the
lv_segment struct, and some necessary libdevmapper flags.
The cachepool is the LV and corresponding segment type that will hold
all information pertinent to the cache itself - it's size, cachemode,
cache policy, core arguments (like migration_threshold), etc.
There is a problem with the way mirrors have been designed to handle
failures that is resulting in stuck LVM processes and hung I/O. When
mirrors encounter a write failure, they block I/O and notify userspace
to reconfigure the mirror to remove failed devices. This process is
open to a couple races:
1) Any LVM process other than the one that is meant to deal with the
mirror failure can attempt to read the mirror, fail, and block other
LVM commands (including the repair command) from proceeding due to
holding a lock on the volume group.
2) If there are multiple mirrors that suffer a failure in the same
volume group, a repair can block while attempting to read the LVM
label from one mirror while trying to repair the other.
Mitigation of these races has been attempted by disallowing label reading
of mirrors that are either suspended or are indicated as blocking by
the kernel. While this has closed the window of opportunity for hitting
the above problems considerably, it hasn't closed it completely. This is
because it is still possible to start an LVM command, read the status of
the mirror as healthy, and then perform the read for the label at the
moment after a the failure is discovered by the kernel.
I can see two solutions to this problem:
1) Allow users to configure whether mirrors can be candidates for LVM
labels (i.e. whether PVs can be created on mirror LVs). If the user
chooses to allow label scanning of mirror LVs, it will be at the expense
of a possible hang in I/O or LVM processes.
2) Instrument a way to allow asynchronous label reading - allowing
blocked label reads to be ignored while continuing to process the LVM
command. This would action would allow LVM commands to continue even
though they would have otherwise blocked trying to read a mirror. They
can then release their lock and allow a repair command to commence. In
the event of #2 above, the repair command already in progress can continue
and repair the failed mirror.
This patch brings solution #1. If solution #2 is developed later on, the
configuration option created in #1 can be negated - allowing mirrors to
be scanned for labels by default once again.
Accept --ignoreskippedcluster with pvs, vgs, lvs, pvdisplay, vgdisplay,
lvdisplay, vgchange and lvchange to avoid the 'Skipping clustered
VG' errors when requesting information about a clustered VG
without using clustered locking and still exit with success.
The messages can still be seen with -v.
- null_fd resource leak on error path in _reopen_fd_null fn
- dead code in verify_message in clvmd code
- dead code in _init_filter_components in toolcontext code
- null dereference in dm_prepare_selinux_context on error path if
setfscreatecon fails while resetting SELinux context
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.
When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.
Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.
Log each filter initialisation to show sequence.
Avoid duplicate 'Using $device' debug messages.
When using a global_filter and if this filter is incorrectly
specified, we ended up with a segfault:
raw/~ $ pvs
Invalid filter pattern "r|/dev/sda".
Segmentation fault (core dumped)
In the example above a closing '|' character is missing at the end
of the regex. The segfault itself was caused by trying to destroy
the same filter twice in _init_filters fn within the error path
(the "bad" goto target):
bad:
if (f3)
f3->destroy(f3);
if (f4)
f4->destroy(f4);
Where f3 is the composite filter (sysfs + regex + type + md + mpath filter)
and f4 is the persistent filter which encompasses this composite filter
within persistent filter's 'real' field in 'struct pfilter'.
So in the end, we need to destroy the persistent filter only as
this will also destroy any 'real' filter attached to it.
The activation/auto_set_activation_skip enables/disables automatic
adding of the ACTIVATION_SKIP LV flag. By default thin snapshots
are flagged to be skipped during activation.
And by default, the auto_set_activation_skip is enabled.
Till now, we needed the config tree merge only for merging
tag configs with lvm.conf. However, this type of merging
did a few extra exceptions:
- leaving out the tags section
- merging values in activation/volume_list
- merging values in devices/filter
- merging values in devices/types
Any other config values were replaced by new values.
However, we'd like to do a 'raw merge' as well, simply
bypassing the exceptions listed above. This will help
us to create a single tree representing the cascaded
configs like CONFIG_STRING -> CONFIG_PROFILE -> ...
The reason for this patch is that when trees are cascaded,
the first value found while traversing the cascade is used,
not making any exceptions like we do for tag configs.
Before, the status of the configuration check (config_def_check fn call)
was saved directly in global configuration definitinion array (as part
of the cfg_def_item_t/flags)
This patch introduces the "struct cft_check_handle" that defines
configuration check parameters as well as separate place to store
the status (status here means CFG_USED and CFG_VALID flags, formerly
saved in cfg_def_item_t/flags). This struct can hold config check
parameters as well as the status for each config tree separately,
thus making it possible to run several instances of config_def_check
without interference.
Just to make it more clear and also not to confuse
config_valid with check against config definition
(and its 'valid' flag within the config defintion tree).
This patch adds --profile arg to lvm cmds and adds config/profile_dir
configuration setting to select the directory where profiles are stored
By default it's /etc/lvm/profile.
The profiles are added by using new "add_profile" fn and then loaded
using the "load_profile" fn. All profiles are stored in a cmd context
within the new "struct profile_params":
struct profile_params {
const char *dir;
struct profile *global_profile;
struct dm_list profiles_to_load;
struct dm_list profiles;
};
...where "dir" is the directory with profiles, "global_profile" is
the profile that is set globally via the --profile arg (IOW, not
set per VG/LV basis based on metadata record) and the "profiles"
is the list with loaded profiles.
A helper type that helps with identification of the configuration source
which makes handling the configuration cascade a bit easier, mainly
removing and adding configuration trees to cascade dynamically.
Currently, the possible types are:
CONFIG_UNDEFINED - configuration is not defined yet (not initialized)
CONFIG_FILE - one file configuration
CONFIG_MERGED_FILES - configuration that is a result of merging more files into one
CONFIG_STRING - configuration string typed on cmd line directly
CONFIG_PROFILE - profile configuration (the new type of configuration, patches will follow...)
Also, generalize existing "remove_overridden_config_tree" to work with
configuration type identification in a cascade. Before, it was just
the CONFIG_STRING we used. Now, we need some more to add in a
cascade (like the CONFIG_PROFILE). So, we have:
struct dm_config_tree *remove_config_tree_by_source(struct cmd_context *cmd, config_source_t source);
config_source_t config_get_source_type(struct dm_config_tree *cft);
... for removing the tree by its source type from the cascade and
simply getting the source type.
Changes:
- move device type registration out of "type filter" (filter.c)
to a separate and new dev-type.[ch] for common use throughout the code
- the structure for keeping the major numbers detected for available
device types and available partitioning available is stored in
"dev_types" structure now
- move common partitioning detection code to dev-type.[ch] as well
together with other device-related functions bound to dev_types
(see dev-type.h for the interface)
The dev-type interface contains all common functions used to detect
subsystems/device types, signature/superblock recognition code,
type-specific device properties and other common device properties
(bound to dev_types), including partitioning support.
- add dev_types instance to cmd context as cmd->dev_types for common use
- use cmd->dev_types throughout as a central point for providing
information about device types
Last commit made dump filter only partially composable.
Add remaining functionality and also support composable wipe,
which is needed, when i.e. vgscan needs to remove cache.
(in release fix)
Add a generic dump operation to filters and make the composite filter call
through to its components. Previously, when global filter was set, the code
would treat the toplevel composite filter's private area as if it belonged a
persistent filter, trying to write nonsense into a non-sensical file.
Also deal with NULL cmd->filter gracefully.
Setting the cmd->default_settings.udev_fallback also requires DM
driver version check. However, this caused useless mapper/control
access with ioctl if not needed actually. For example if we're not
using activation code, we don't need to know the udev_fallback as
there's no node and symlink processing.
For example, this premature mapper/control access caused problems
when using lvm2app even when no activation happens - there are
situations in which we don't need to use mapper/control, but still
need some of the lvm2app functionality. This is also the case for
lvm2-activation systemd generator which just needs to look at the
lvm2 configuration, but it shouldn't touch mapper/control.
Add verbose message when we will not obtain devices from udev
(i.e. testing is using different udev dir, and the log was
giving misleading info about using udev)
Add proper error message if zalloc from pull would have failed.
Fix typo obolete -> obsolete
Configuration checking is initiated during config load/processing
(_process_config fn) which is part of the command context
creation/refresh.
This patch also defines 5 types of trees that could be created from
the configuration definition (config_settings.h), the cfg_def_tree_t:
- CFG_DEF_TREE_CURRENT that denotes a tree of all the configuration
nodes that are explicitly defined in lvm.conf/--config
- CFG_DEF_TREE_MISSING that denotes a tree of all missing
configuration nodes for which default valus are used since they're
not explicitly used in lvm.conf/--config
- CFG_DEF_TREE_DEFAULT that denotes a tree of all possible
configuration nodes with default values assigned, no matter what
the actual lvm.conf/--config is
- CFG_DEF_TREE_NEW that denotes a tree of all new configuration nodes
that appeared in given version
- CFG_DEF_TREE_COMPLETE that denotes a tree of the whole configuration
tree that is used in LVM2 (a combination of CFG_DEF_TREE_CURRENT +
CFG_DEF_TREE_MISSING). This is not implemented yet, it will be added
later...
The function that creates the definition tree of given type:
struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec);
Where the "spec" specifies the tree type to be created:
struct config_def_tree_spec {
cfg_def_tree_t type; /* tree type */
uint16_t version; /* tree at this LVM2 version */
int ignoreadvanced; /* do not include advanced configs */
int ignoreunsupported; /* do not include unsupported configs */
};
This tree can be passed to already existing functions that write
the tree on output (like we already do with cmd->cft).
There is a new lvm.conf section called "config" with two new options:
- config/checks which enables/disables checking (enabled by default)
- config/abort_on_errors which enables/disables aborts on any type of
mismatch found in the config (disabled by default)
For example, the old call and reference:
find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)
...now becomes:
find_config_tree_str(cmd, devices_dir_CFG)
So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
Add log/debug_classes to lvm.conf to allow debug messages to be
classified and filtered at runtime.
The dm_errno field is only used by log_error(), so I've redefined it
for log_debug() messages to hold the message class.
By default, all existing messages appear, but we can add categories that
generate high volumes of data, such as logging all traffic to/from
lvmetad.
$ export DM_DISABLE_UDEV=1
$ dmsetup create test --table "0 1 zero"
Udev is running and DM_DISABLE_UDEV environment variable is set. Bypassing udev, device-mapper library will manage device nodes in device directory.
$ lvchange -ay vg/lvol0
Udev is running and DM_DISABLE_UDEV environment variable is set. Bypassing udev, LVM will manage logical volume symlinks in device directory.
Udev is running and DM_DISABLE_UDEV environment variable is set. Bypassing udev, LVM will obtain device list by scanning device directory.
Udev is running and DM_DISABLE_UDEV environment variable is set. Bypassing udev, device-mapper library will manage device nodes in device directory.
Setting this environment variable will cause a full fallback
to old direct node and symlink management in libdevmapper and lvm2.
It means:
- disabling udev synchronization
(--noudevsync in dmsetup and --noudevsync + activation/udev_sync=0
lvm2 config)
- disabling dm and any subsystem related udev rules
(--noudevrules in dmsetup and activation/udev_rules=0 lvm2 config)
- management of nodes/symlinks under /dev directly by libdevmapper/lvm2
(--verifyudev in dmsetup and activation/verify_udev_operations=1
lvm2 config)
- not obtaining any device list from udev database
(devices/obtain_device_list_from_udev=0 lvm2 config)
Note: we could set all of these before - there's no functional change!
However the DM_DISABLE_UDEV environment variable is a nice shortcut
to make it easier for libdevmapper users so that one can switch off all
of the udev management off at one go directly on the command line,
without a need to modify any source or add any extra switches.
When valgrind usage is desired by user (--enable-valgrind-pool)
skip playing/closing/reopenning with descriptors - it makes
valgridng useless.
Make sleep delay for clvmd start longer.
We should check whether the fd is opened before trying to reopen it.
For example, the stdin is closed in test/lib/harness.c causing the
test suite to fail.
Fix setvbuf code by closing and reopening stream before changing buffer.
But we need to review what this code is doing embedded inside a library
function rather than the simpler original form being run independently
at the top of main() by tools that need it.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
With latest changes in the udev, some deprecated functions were removed
from libudev amongst which there was the "udev_get_dev_path" function
we used to compare a device directory used in udev and directore set in
libdevmapper. The "/dev" is hardcoded in udev now (udev version >= 183).
Amongst other changes and from packager's point of view, it's also
important to note that the libudev development library ("libudev-devel")
could now be a part of the systemd development library ("systemd-devel")
because of the udev + systemd merge.
Never return unfinished toolcontext - since error path is hit on
various stages of initialization we cannot leave it partially uninitialized,
since we would need to spread many more test across the code for config_valid.
Instead return NULL and properly release udev library resources as well.
label_exit() is called destroy_toolcontext() and we are now
using standard dm_list function for destroy, we have to make sure
dm_list gets initialized properly.
LVM- prefix.
Try harder not to leave stray empty devices around (locally or remotely) when
reverting changes after failures while there are inactive tables.
LVM metadata knows only of striped segments - not linear ones.
The activation code detects segments with a single stripe and switches
them to use the linear target.
If the new lvm.conf setting is set to 0 (e.g. in a test script), this
'optimisation' is turned off.
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.
Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
Add filter which tries to check if scanned device is part
of active multipath.
Firstly, only SCSI major number devices are handled in filter.
Then it checks if device has exactly one holder (in sysfs) and
if it is device-mapper device and DM-UUID is prefixed by "MPATH-".
If so, this device is filtered out.
The whole filter can be switched off by setting
mpath_component_detection in lvm.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=597010
Signed-off-by: Milan Broz <mbroz@redhat.com>
Properly detect if the filters were refreshed properly.
(May needs few more fixes ??)
Filter refresh may fail because it may be out of free file descriptors
when clvmd gets overloaded.
Before, we used to display "Can't remove open logical volume" which was
generic. There 3 possibilities of how a device could be opened:
- used by another device
- having a filesystem on that device which is mounted
- opened directly by an application
With the help of sysfs info, we can distinguish the first two situations.
The third one will be subject to "remove retry" logic - if it's opened
quickly (e.g. a parallel scan from within a udev rule run), this will
finish quickly and we can remove it once it has finished. If it's a
legitimate application that keeps the device opened, we'll do our best
to remove the device, but we will fail finally after a few retries.
Makes dumpconfig whole-section output wrong in a different way from before,
but we should be able to merge cft_cmdline properly into cmd->cft now and
remove cascade.
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
Add config option to enable crc checking of VG structures.
Currently it's disabled by default.
For the internal test-suite this check it is enabled.
Note: In the case the internal error is detected, debug build with
compile option DEBUG_ENFORCE_POOL_LOCKING helps to catch the source
of the problem.
Implementation described in doc/lvm2-raid.txt.
Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
We've used udev fallback code till now to check whether udev
created/removed the entries in /dev correctly and if not,
a repair was done (giving a warning messagea about that).
This patch adds a possibility to enable this additional check
and subsequent fallback only when required (debugging purposes
mostly) and trust udev completely.
So let's disable the fallback code by default and add a new
configuration option "activation/udev_fallback".
(The original code for creating the nodes will still be used
in case the device directory that is set in lvm.conf differs
from the one that udev uses and also when activation/udev_rules
is set to 0 - otherwise we would end up with no nodes/symlinks
at all)
allocates these buffers in such way it adds memory page for each such buffer
and size of unlock memory check will mismatch by 1 or 2 pages.
This happens when we print or read lines without '\n' so these buffers are
used. To avoid this extra allocation, use setvbuf to set these bufffers ahead.
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
Also, add a new 'obtain_device_list_from_udev' setting to lvm.conf with which
we can turn this feature on or off if needed.
If set, the cache of block device nodes with all associated symlinks
will be constructed out of the existing udev database content.
This avoids using and opening any inapplicable non-block devices or
subdirectories found in the device directory. This setting is applied
to udev-managed device directory only, other directories will be scanned
fully. LVM2 needs to be compiled with udev support for this setting to
take effect. N.B. Any device node or symlink not managed by udev in
udev directory will be ignored with this setting on.
Add configurable option to define minimal size of
of block device usable as a PV.
pv_min_size() is added to lvm-globals and it's being
initialized through _process_config.
Macro PV_MIN_SIZE is unused and removed.
New define DEFAULT_PV_MIN_SIZE_KB is added to lvm-global
and unlike PV_MIN_SIZE it uses KB units.
Should help users with various slow devices attached to the system,
which cannot be easily filtered out (like FDD on /dev/sdX):
https://bugzilla.redhat.com/show_bug.cgi?id=644578
If some allocation for peristent filter fails its memory reference
was lost, fix it by calling filter's destructor.
Fix log_error messages for failing allocation.
To have better control were the config tree could be modified use more
const pointers and very carefully downcast them back to non-const
(for config tree merge).
Set cmd->independent_metadata_areas if metadata/dirs or disk_areas in use.
- Identify and record this state.
Don't skip full scan when independent mdas are present even if memlock is set.
- Clusters and OOM aren't supported, so no problem doing the proper scans.
Avoid revalidating the label cache immediately after scanning.
- A simple optimisation.
Support scanning for a single VG in independent mdas.
- Not used by the fix but I left it in anyway as later patches might use it.
For example, when using '--config "backup { ... }"' line, the values from
lvm.conf (or default values) should be overridden. This patch adds
reinitialisation of archive and backup handling on toolcontext refresh
which makes these settings to be applied.
We can already detect MD devices internally. But when using MD partitions,
these have "block extended major" (blkext) assigned (259). Blkext major
is also used in general, so we need to check whether the original device
is an MD device actually.
