1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-29 15:22:30 +03:00
Commit Graph

727 Commits

Author SHA1 Message Date
David Teigland
1901a47df1 device_id: fix conditions for device_ids_refresh
Fix commit 847f1dd99c
"device_id: rewrite validation of devname entries"

which began calling device_ids_refresh() in cases where it
was unnecessary, leading to extra PV searches and warnings.
Specifically, a command like "lvs <vg>" would use the hints
file to scan only devices for the named VG.  This means that
scanning other PVs would be skipped, and device IDs of those
PVs could not be validated because there are no PVID values
to verify.  This missing info would cause messages about
the missing info, and would cause device_ids_refresh to
search for the PVs that had been intentionally skipped.
2023-10-05 15:33:55 -05:00
David Teigland
88aa285a79 devices: refresh device ids if the system changes
If the system changes, locate PVs that appear on different devices,
and update the device IDs in the devices file.  A system change is
detected by saving the DMI product_uuid or hostname in the devices
file, and comparing it to the current system value.  If a root PV
is restored or copied to a new system with different devices, then
the product_uuid or hostname should change, and trigger lvm to
locate PVIDs from system.devices on new devices.
2023-09-27 15:22:11 -05:00
Zdenek Kabelac
d34d1f0173 debug: trace result failure 2023-09-03 22:03:33 +02:00
Zdenek Kabelac
97770d5aeb debug: check for syscalls
Add some debug checks for possibly failing syscalls.
2023-09-03 22:03:33 +02:00
Zdenek Kabelac
cb61d2294a filesystem: move stat after open check
To avoid time-of-check-time-of-use clash, take the stat()
after successful open with fstat().
Also add some debugs for failing sys calls.
2023-09-03 22:03:33 +02:00
Zdenek Kabelac
71ff21f57c gcc: initialize variables 2023-08-23 15:10:40 +02:00
David Teigland
847f1dd99c device_id: rewrite validation of devname entries
The old approach was too complicated and didn't work correctly
in some cases.
2023-08-04 11:45:40 -05:00
Zdenek Kabelac
5ce236a691 gcc: correct signess comparation
Compare int to int and unsigned to unsigned...
2023-07-13 21:31:18 +02:00
David Teigland
7c3eca833f lvresize: fix multiple mounts
which was mistaken as a mounted LV that had been renamed.
2023-06-16 12:11:51 -05:00
David Teigland
228a8e8c1f device_id: ignore leading and trailing spaces for sys_wwid and sys_serial
Leading and trailing underscores are also ignored to handle device ids
written by previous versions which replaced all spaces with underscores.
2023-06-15 15:17:14 -05:00
David Teigland
74feebdab7 device_id: fix handling of non-PV with duplicate serial number
Fix in the code that matches devices to system.devices entries when
the devices have the same serial number.  A non-PV device in
system.devices has no pvid value, and the code was segfaulting
when checking the null pvid value.
2023-06-08 12:24:05 -05:00
David Teigland
4cdb178968 device_id: ignore trailing underscores in t10 wwid from devices file
In previous lvm versions, trailing spaces at the end of a t10 wwid would
be replaced with underscores, so the IDNAME string in system.devices
would look something like "t10.123_".  Current versions of lvm ignore
trailing spaces in a t10 wwid, so the IDNAME string used would be
"t10.123".  The different values would cause lvm to not recognize a
device in system.devices with the trailing _.  Fix this by ignoring
trailing underscores in the IDNAME string from system.devices.
2023-05-19 14:05:10 -05:00
Zdenek Kabelac
7b52a663a6 cov: validate dev_get_primary_dev result
Make sure primary_dev is defined when using it.
2023-05-10 15:27:48 +02:00
Zdenek Kabelac
f038fc3b17 cov: remove unused but set variables 2023-05-06 20:38:57 +02:00
Zdenek Kabelac
c451d7925d cleanup: correcting some log_print
Correcting to log_print_unless_silent(),
so -qq can do some work.
2023-05-06 20:38:49 +02:00
Zdenek Kabelac
39b2bd06b8 cov: some initializers 2023-05-06 19:22:05 +02:00
David Teigland
1857eb9fe0 lvresize: fix check for mounted and renamed LV to handle spaces
Replace spaces with \040 in directory paths from getmntent (mtab).

The recent commit 5374a44c57 compares mount point directory paths
from /etc/mtab and /proc/mounts, in order to detect when a mounted
LV has been renamed.  The directory path comparison does not work
correctly when the path contains spaces because getmntent uses
ascii space chars and proc replaces spaces with \040.
2023-02-23 16:55:36 -06:00
Zdenek Kabelac
cf0dc9a13c filesystem: use PATH_MAX for linux paths 2023-02-12 23:56:29 +01:00
David Teigland
dc99f0def1 device_id: ignore quotes in device id
A t10 wwid string was found containing a " character
which breaks vg metadata parsing.  Ignore any quotation
marks in device id strings.
2023-02-06 12:24:18 -06:00
David Teigland
d9f8acb65a lvresize: fail early if crypt device is missing
If extending an LV with crypto_LUKS on it, and the crypt device
is missing, then fail the command before extending the LV.
2023-01-30 17:12:11 -06:00
David Teigland
5374a44c57 lvresize: fail early if mounted LV was renamed
If a mounted LV is renamed, then fs resizing utilities will fail,
so detect this condition and fail the command before any changes
are made.
2023-01-26 14:02:20 -06:00
David Teigland
3bb5576528 lvresize: only resize crypt when fs resize is enabled
There were a couple of cases where lvresize, without --fs resize,
was resizing the crypt layer above the LV.  Resizing the crypt
layer should only be done when fs resizing is enabled (even if the
fs is already small enough due to being independently reduced.)

Also, check the size of the crypt device to see if it's already
been reduced independently, and skip the cryptsetup resize if
it's not needed.
2023-01-19 11:52:14 -06:00
Zdenek Kabelac
44a2f2df92 cov: remove unused header files 2022-12-20 15:04:36 +01:00
David Teigland
6613a61d3b device_id: fix segfault verifying serial for non-pv
The recent change that verifies sys_serial system.devices entries
using the PVID did not exclude non-PV devices from being checked.
The verification code would attempt to use du->pvid which was null
for the non-PVs causing a segfault.
2022-12-02 12:25:10 -06:00
David Teigland
a74468116e device_id: check return value of label_read_pvid
for covscan
2022-12-01 11:49:51 -06:00
David Teigland
e71b434663 device_id: _get_devs_with_serial_numbers add missing free
on malloc failure path
2022-12-01 11:43:24 -06:00
David Teigland
7552ed9010 device_id: add null id->name null check
for covscan
2022-12-01 10:38:48 -06:00
David Teigland
c98617c593 devices: factor common list functions
which were duplicated in various places
2022-11-07 11:38:46 -06:00
David Teigland
761b922178 device_id: handle duplicate serial numbers
Handle multiple devices using the same serial number as
their device id.  After matching devices to devices file
entries, if there is a discrepency between the ondisk PVID
and the devices file PVID, then rematch devices to
devices file entries using PVID, looking at all disks
on the system with the same serial number.
2022-11-07 08:56:02 -06:00
David Teigland
bdab36cf3f device_id: look for serial number in other locations
Only /sys/dev/block/major:minor/device/serial was read to find
a disk serial number, but a serial number seems to be reported
more often in other locations, so check these also:
/sys/dev/block/major:minor/device/vpd_pg80
/sys/class/block/vda/serial (for virtio disks only)
2022-11-07 08:56:02 -06:00
David Teigland
f188c9e403 device_id: remove debug trace
for common case where a device id type is not used.
2022-10-24 16:20:28 -05:00
David Teigland
830ece75e8 cmd: save device_id_sysfs_dir
read and save device_id_sysfs_dir to avoid spamming
debug output from find_config_tree_str.
2022-10-24 16:20:28 -05:00
David Teigland
13c63f0cfa lvmdevices: use deviceidtype option strictly
Only use the device id type specified by --deviceidtype,
and fail if that type is not available for the device.
2022-10-10 11:47:29 -05:00
David Teigland
79e67fc5e4 device id: add new types using values from vpd_pg83
The new device_id types are: wwid_naa, wwid_eui, wwid_t10.
The new types use the specific wwid type in their name.
lvm currently gets the values for these types by reading
the device's vpd_pg83 sysfs file (this could change in the
future if better methods become available for reading the
values.)

If a device is added to the devices file using one of these
types, prior versions of lvm will not recognize the types
and will be unable to use the devices.

When adding a new device, lvm continues to first use sys_wwid
from the sysfs wwid file.  If the device has no sysfs wwid file,
lvm now attempts to use one of the new types from vpd_pg83.

If a devices file entry with type sys_wwid does not match a
given device's sysfs wwid file, the sys_wwid value will also
be compared to that device's other wwids from its vpd_pg83 file.
If the kernel changes the wwid type reported from the sysfs
wwid file, e.g. from a device's t10 id to its naa id, then lvm
should still be able to match it correctly using the vpd_pg83
data which will include both ids.
2022-10-10 11:47:29 -05:00
David Teigland
8de87e0207 device id: change space handling in t10 wwid
t10 wwids are now edited in the same way that multipath does,
which is replacing a series of spaces with one _.  Previously
lvm replaced every space with one _.  Devices file entries
with the old form will be converted to the new shorter form.
2022-10-10 11:47:29 -05:00
David Teigland
380ab3f45c device id wwid adjustments
Move the functions handling dev wwids.

Add dev flags indicating that wwids have been read from
sysfs wwid file or sysfs vpd_pg83 file.  This can be
used to avoid rereading these.

Improve filter-mpath search for a device's wwid in
/etc/multipath/wwids, to avoid unnecessary rereading
of wwids from sysfs files.

Type 8 wwids from vpd_pg83 with naa or eui names should be
saved as those types.
2022-10-10 11:47:29 -05:00
David Teigland
b09de683c7 blkid: fix BLKID_SUBLKS_FSINFO usage
Use this flag for all fs info lookups, including BLOCK_SIZE,
if it is defined in blkid.h.
2022-09-29 15:25:32 -05:00
David Teigland
b39ad99325 lvresize: let env var set lvresize_fs_helper_path 2022-09-27 15:42:18 -05:00
David Teigland
7f1ef25b46 remove unused variables 2022-09-27 15:42:18 -05:00
David Teigland
50281e5710 change messages about libblkid features
remove message about missing libblkid features

change message recommending resize_fsadm when libblkid
features are not available.
2022-09-27 15:13:31 -05:00
David Teigland
0887896847 vgremove: remove online files in run dir
These files are automatically cleared on reboot given
that /run is tmpfs, and that remains the primary way
of clearing online files.

But, if there's extreme use of vgcreate+pvscan+vgremove
between reboots, then removing online files in vgremove
will limit the number of unused online files using space
in /run.
2022-09-14 14:19:29 -05:00
David Teigland
264827cb98 lvresize: add new options and defaults for fs handling
The new option "--fs String" for lvresize/lvreduce/lvextend
controls the handling of file systems before/after resizing
the LV.  --resizefs is the same as --fs resize.

The new option "--fsmode String" can be used to control
mounting and unmounting of the fs during resizing.

Possible --fs values:

checksize
  Only applies to reducing size; does nothing for extend.
  Check the fs size and reduce the LV if the fs is not using
  the affected space, i.e. the fs does not need to be shrunk.
  Fail the command without reducing the fs or LV if the fs is
  using the affected space.

resize
  Resize the fs using the fs-specific resize command.
  This may include mounting, unmounting, or running fsck.
  See --fsmode to control mounting behavior, and --nofsck to
  disable fsck.

resize_fsadm
  Use the old method of calling fsadm to handle the fs
  (deprecated.) Warning: this option does not prevent lvreduce
  from destroying file systems that are unmounted (or mounted
  if prompts are skipped.)

ignore
  Resize the LV without checking for or handling a file system.
  Warning: using ignore when reducing the LV size may destroy the
  file system.

Possible --fsmode values:

manage
  Mount or unmount the fs as needed to resize the fs,
  and attempt to restore the original mount state at the end.

nochange
  Do not mount or unmount the fs. If mounting or unmounting
  is required to resize the fs, then do not resize the fs or
  the LV and fail the command.

offline
  Unmount the fs if it is mounted, and resize the fs while it
  is unmounted. If mounting is required to resize the fs,
  then do not resize the fs or the LV and fail the command.

Notes on lvreduce:

When no --fs or --resizefs option is specified:
. lvextend default behavior is fs ignore.
. lvreduce default behavior is fs checksize
  (includes activating the LV.)

With the exception of --fs resize_fsadm|ignore, lvreduce requires
the recent libblkid fields FSLASTBLOCK and FSBLOCKSIZE.
FSLASTBLOCK*FSBLOCKSIZE is the last byte used by the fs on the LV,
which determines if reducing the fs is necessary.
2022-09-13 15:15:05 -05:00
David Teigland
55e9494e5f remove libblkid flag BLKID_SUBLKS_FSINFO
This flag is not needed in fs_block_size_and_type()
added in the previous commit.
2022-09-09 16:14:27 -05:00
David Teigland
b869a6ff7a fix fs block size detection
blkid_get_tag_value() is not a reliable way to query the fs
BLOCK_SIZE, so use the "probe" functions instead.
2022-09-09 15:50:00 -05:00
David Teigland
0eebd9d780 vgimportdevices: fix locking when creating devices file
Take the devices file lock before creating a new devices file.
(Was missed by the change to preemptively create the devices
file prior to setup_devices(), which was done to improve the
error path.)
2022-08-30 14:52:00 -05:00
David Teigland
8c3cfc75c7 devices file: fix pvcreate --uuid matching pvid entry with no device id
pvcreate with --uuid would segfault if a devices file entry matched
the specified pvid, but the devices file entry had no device_id, which
could happen if the entry has a devname idtype.
2022-08-19 13:34:36 -05:00
Zdenek Kabelac
1a981e9b6e devices: drop double // from sysfs path
dm_sysfs_dir() comes internally as  /sys/.
2022-08-19 14:56:57 +02:00
Zdenek Kabelac
5c463584f6 cov: remove unused headers 2022-07-11 01:18:24 +02:00
David Teigland
3b0f9cec7e filter-mpath: get wwids from sysfs vpd_pg83
to compare with wwids in /etc/multipath/wwids when
excluding multipath components.  The wwid printed
from the sysfs wwid file may not be the wwid used
in multipath wwids.  Save the wwids found for each
device on dev->wwids to avoid repeating reading
and parsing the sysfs files.
2022-06-08 15:06:01 -05:00
David Teigland
c302903dba filter-mpath: handle other wwid types in blacklist
Fixes commit 494372b4ee
  "filter-mpath: use multipath blacklist"
to handle wwids with initial type digits 1 and 2 used
for t10 and eui ids.  Originally recognized type 3 naa.
2022-06-06 11:39:02 -05:00
David Teigland
bfe072e438 devices file: fail if --devicesfile filename doesn't exist
A typo of the filename after --devicesfile should result in a
command error rather than the command falling back to using no
devices file at all.  Exception is vgcreate|pvcreate which
create a new devices file if the file name doesn't exist.
2022-05-27 14:27:03 -05:00
David Teigland
494372b4ee filter-mpath: use multipath blacklist
Explicit wwid's from these sections control whether the
same wwid in /etc/multipath/wwids is recognized as a
multipath component.  Other non-wwid keywords are not
used, and may require disabling the use of the multipath
wwids file in lvm.conf.
2022-04-22 16:07:47 -05:00
David Teigland
bee575d678 devices file: remove extraneous unlock in vgchange -u
vgchange -u exit path was unlocking the devices file in cases
when it wasn't needed, which produced an warning.
2022-04-13 12:19:04 -05:00
David Teigland
6cb0b44cd2 filter: remove unused EAGAIN case and flag
The case of filters returning EAGAIN and using the
FILTER_AFTER_SCAN flag is no longer used.
2022-04-06 12:51:34 -05:00
David Teigland
fb7698b0ce lvmdevices: --deldev using device id
When used with --deviceidtype, --deldev can specify
a device id to remove.
2022-04-06 12:51:34 -05:00
David Teigland
8db3b11e4e change messages about filtered devices
Change messages that refer to devices being "excluded by filters"
to say just "excluded".  This will avoid mistaking the word
"filters" with the lvm.conf filter setting.
2022-04-01 13:38:21 -05:00
David Teigland
6e22be20c6 devices file: warn about missing multipath entry
Warn if a scsi device is listed in the devices file that
is used by a multipath device that is not listed.  This
will happen if a scsi device is listed in the devices
file and then an mpath device is set up to use it.

The way to correct this would be to remove the devices
file entry for the component device and add a new entry
for the multipath device.
2022-04-01 13:38:21 -05:00
David Teigland
7b1a857d5a devices: use dev-cache aliases handling from label scan functions
The label scan functions where doing some device alias validation
which is now better handled by the dev-cache layer, so just use
that.
2022-02-28 17:37:12 -06:00
David Teigland
4eb04c8c05 devices: fix dev_name assumptions
dev_name(dev) returns "[unknown]" if there are no names
on dev->aliases.  It's meant mainly for log messages.

Many places assume a valid path name is returned, and
use it directly.  A caller that wants to use the path
from dev_name() must first check if the dev has any
paths with dm_list_empty(&dev->aliases).
2022-02-24 17:22:04 -06:00
David Teigland
00c3069872 devices: initial use of existing option
Use dev_cache_get_existing() in a few common, high level
locations where it's obvious that only existing dev-cache
entries are wanted.  This can be expanded and used in more
locations (or dev_cache_get can stop creating new entries.)
2022-02-24 17:22:03 -06:00
David Teigland
7e70041e32 devices: drop incorrect paths from aliases list
along with some basic checks for cases when a device
has no aliases.

lvm itself creates many situations where a struct device
has no valid paths, when it activates and opens an LV,
does something with it, e.g. zeroing, and then closes
and deactivates it.  (dev-cache is intended for PVs, and
the use of LVs should be moved out of dev-cache in a
future patch.)
2022-02-24 17:22:03 -06:00
David Teigland
1126be8f8d devices: simplify dev_cache_get_by_devt
remove unused args, and no callers need or want a
repeated dev_cache_scan if there is no dev from the
lookup.
2022-02-24 17:21:58 -06:00
David Teigland
d59382c772 devices file: do not clear PVID of unread devices
In a certain disconnected state, a block device is present on
the system, can be opened, reports a valid size, reports the
correct device id (wwid), and matches a devices file entry.
But, reading the device can still fail.  In this case,
device_ids_validate() was misinterpreting the read error as
the device having no data/label on it (and no PVID).
The validate function would then clear the PVID from the
devices file entry for the device, thinking that it was
fixing the devices file (making it consistent with the on disk
state.)  Fix this by not attempting to check and correct a
devices file entry that cannot be read.  Also make this case
explicit in the hints validation code (which was doing the
right thing but indirectly.)
2022-02-10 14:16:04 -06:00
David Teigland
3fce6a81f8 lvmdevices: make deldev work for missing device 2022-02-03 16:56:03 -06:00
David Teigland
8f50c5e79b lvmdevices: fix checks when adding entries
Removes some incorrect and unnecessary checks for other entries
when adding a new devices.  The removed checks and corrections were
mostly redundant with what is already done by device id matching.
Other checking is reworked so the warnings are a bit different.
2022-01-25 15:18:29 -06:00
David Teigland
9e9f02acf0 device_id: fix search for renamed device when the wwid is ignored
When a device has a wwid (from sysfs), but lvm ignores the wwid,
e.g. because it contains an unreliable "QEMU" value, then lvm
falls back to using IDTYPE=devname (the device name) as the
device id.  If the device name changes after reboot, then lvm
automatically searches for the PV on other devices to find the
new device name and correct system.devices.  When searching for
the PV, lvm skips looking at devices that would use other id types,
e.g. if a device would use a wwid and not a devname, then it
skips checking it.  However, it failed to account for the fact
that a device may have wwid that was ignored, in which case it
should be checked.
2022-01-25 10:47:50 -06:00
David Teigland
a972d63c54 lvmdevices check: error exit if update is needed
. error exit means that lvmdevices --update would make a change.

. remove check of PART field from --check because it isn't used.

. unlink searched_devnames file to ensure check|update will search
2022-01-14 14:59:28 -06:00
Zdenek Kabelac
09a4b56895 hash: raise hash table size
With slightly bigger hash tables, there is considerable
less hash collisions.
2021-12-20 16:13:28 +01:00
наб
6a431eb242 devices: recognise rbd (ceph rados block device)
Description stolen from linux d/b/rbd.c L3:
  rbd.c -- Export ceph rados objects as a Linux block device

16 partitions seem to make sense according to L90:
  #define RBD_SINGLE_MAJOR_PART_SHIFT 4

Running *scan -vvvvvvdddddd yields
  #filters/filter-type.c:28            /dev/rbd1p5: Skipping: Unrecognised LVM device type 252
  #filters/filter-persistent.c:131           filter caching bad /dev/rbd1p5
right now, and adding
  types = ["rbd", 252]
to /e/l/lvm.conf (with the matching "252 rbd" in /p/devices) works as a
per-machine fix:
  rbd1               252:16   0      1T  1 disk
  |-rbd1p1           252:17   0    243M  1 part
  |-rbd1p2           252:18   0      1K  1 part
  `-rbd1p5           252:21   0 1023.8G  1 part
    `-dev01--vg-root 253:0    0 1023.8G  0 lvm
but rbd is supported by upstream so it'd be nice to have it work OOB
2021-12-13 13:32:06 -06:00
David Teigland
ae54e75176 device_id: handle wwid with spaces or control characters
non-standard wwid can be reported from sysfs with spaces/etc.
replace with "_"
2021-12-02 13:33:18 -06:00
David Teigland
c42a05c3ec pvscan: fix error message for invalid devname
uninitialized name buffer used in message.
fixes "pvs_online: include devname in pvid files"
2021-12-01 14:38:17 -06:00
David Teigland
d5402e55f6 devices file: don't write in test mode 2021-12-01 10:08:08 -06:00
David Teigland
212b1fc529 devices: exclude multipath components based on matching wwid
If multipath component devices get through the filter and
cause lvm to see duplicate PVs, then check the wwid of the
devs and drop the component devices as if they had been
filtered.  If a dm mpath device was found among the duplicates
then use that as the PV, otherwise do not use any of the
components as the PV.

"duplicate PVs" associated with multipath configs will no
longer stop commands from working.
2021-11-18 17:41:00 -06:00
David Teigland
5c4ce4669e device_id: searched_devnames improvements
Remove the searched_devnames file in a couple more places:
. When hints need refreshing it's possible that a missing
  devices file entry could be found by searching devices
  again.
. When a devices file entry devname is first found to be
  incorrect, a new search for missing entries may be
  useful.
2021-11-16 14:29:17 -06:00
David Teigland
fee3937002 device_id: fix search on filtered device
When devnames are used as device ids and devnames change,
then new devices need to be located for the PVs.  If the old
devname is now used by a filtered device, this was preventing
the code from searching for the new device, so the PV was
reported as missing.
2021-11-16 09:29:24 -06:00
David Teigland
c5f998aec4 device_id: match different dm device names
If a devices file entry for a dm device is using the devname
for the device id, then recognize different dm names as matching.
2021-11-12 16:42:51 -06:00
David Teigland
66f0fe57c3 online files: fix vgname check
The pvs_online file for a PV will not contain a vgname
if the PV has no metadata, so don't require matching
vgname with the pvs_lookup file.
2021-11-12 11:52:36 -06:00
David Teigland
73b4602f21 pvs_online: include devname in pvid files
Include the device name in the /run/lvm/pvs_online/pvid files.
Commands using the pvid file can use the devname to more quickly
find the correct device, vs finding the device using the
major:minor number.  If the devname in the pvid file is missing
or incorrect, fall back to using the devno.
2021-11-09 11:26:26 -06:00
David Teigland
024ce50f06 vgchange -aay: improve unexpected command variations
For completeness and consistency, adjust the behavior
for some variations of:

  vgchange -aay --autoactivation event [vgname]

The current standard use is with a VG name arg, and the
command is only called when all pvs_online files exist.
This is the optimal case, in which only pvs_online devs
are read.  This remains the same.

Clean up behaviors for some other unexpected uses of the
command:

. With no VG name arg, the command activates any VGs
  that are complete according to pvs_online.  If no
  pvs_online files exist, it does nothing.

. If a VG name is used but no PVs online files exist for
  the VG, or the PVs online files are incomplete, then
  consider there could be a problem with the pvs_online
  files, and fall back to a full label scan prior to
  attempting the activation.
2021-11-08 15:19:25 -06:00
David Teigland
b4067e84c7 fix device name from devno for partitions
sysfs files for partitions are different from
whole devices and will require more work to translate
to device names.
2021-11-05 16:21:23 -05:00
David Teigland
62533ae3fa vgchange -aay: optimize device list using pvs_online files
Port another optimization from pvscan -aay to vgchange -aay:
  "pvscan: only add device args to dev cache"

This optimization avoids doing a full dev_cache_scan, and
instead populates dev-cache with only the devices in the
VG being activated.

This involves shifting the use of pvs_online files from
the hints interface up to the higher level label_scan
interface.  This specialized label_scan is structured
around creating a list of devices from the pvs_online
files.  Previously, a list of all devices was created
first, and then reduced based on the pvs_online files.
The initial step of listing all devices was slow when
thousands of devices are present on the system.

This optimization extends the previous optimization that
used pvs_online files to limit the devices that were
actually scanned (i.e. reading to identify the device):
  "vgchange -aay: optimize device scan using pvs_online files"
2021-11-05 12:19:35 -05:00
David Teigland
f40fd88374 move code from pvscan.c to online.c
related to managing files in /run/lvm/pvs_online
and /run/lvm/vgs_online
2021-11-04 11:09:29 -05:00
David Teigland
594f6ca970 rename pvscan_cache_single to expect_missing_vg_device in cmd 2021-11-04 11:08:38 -05:00
David Teigland
33e47182f7 pvscan: only add device args to dev cache
Optimize the common pvscan --cache command by only adding
the necessary devs to dev-cache.
2021-10-19 17:13:57 -05:00
Zdenek Kabelac
60dc44b707 dev-cache: enhance dir scan also for non-udev build 2021-10-18 21:50:56 +02:00
Zdenek Kabelac
88e0d68909 dev-cache: better detection of filesystem
It appear on some systems the first found dev might not be actually for
the filesytem - so use a better way through _cache.st_dev.
2021-10-18 21:16:53 +02:00
Zdenek Kabelac
9cf4eac250 dev-cache: skip different filesystems on dir scan
When scanning configured  /dev dir, avoid entring
directories with different filesystem.

This minimizes risk we will block on i.e. entring
directory with mount point.
2021-10-18 19:17:26 +02:00
Zdenek Kabelac
bae1083472 cov: check device_ids_write return code
At least 'stack' failure code path as the
function device_id_update_vg_uuid() is void.
2021-10-15 23:40:56 +02:00
David Teigland
6fb497ef42 toollib: remove all devices list from process_each_pv
Reporting non-PVs / "all devices" is only done by
pvs -a or pvdisplay -a, so avoid the work managing
a list of all devices in process_each_pv.
In the case when it's needed, use the results of
label_scan which already determines which devs
are not PVs.
2021-10-13 17:29:32 -05:00
David Teigland
272d1ccac8 devices file: unmatching system id should just be warning
there are likely more cases than not where the systemid
does not match and the command should still run.
2021-10-13 13:42:04 -05:00
David Teigland
8e62cbb18e device_id: update stacked PVs for vgchange uuid
If a VG uuid is changed, update the device_id of any
PVs stacked on LVs in the changed VG.
2021-10-04 16:54:44 -05:00
Zdenek Kabelac
df70dca995 make: opened can be needed for either defines case
Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
9eafd44734 gcc: use more zero length arrays
Define last array struct member with zero size.
2021-09-22 17:18:50 +02:00
Zdenek Kabelac
1b52451996 cov: mask some warning about leakage
Mask false-positive leak report.
2021-09-20 14:26:09 +02:00
Zdenek Kabelac
efaab93491 cov: ignore syscall 2021-09-20 14:26:09 +02:00
Zdenek Kabelac
bfc6fe2bac cov: ensure data is not derefenced
Ensure all hypothetical paths cannot dereference NULL *(u->data).
2021-09-20 14:26:09 +02:00
Zdenek Kabelac
ce907bcd26 cov: handle teoretical sysconf failure
sysconf() may also return -1 although rather theoretically.
Default to 4K when such case would happen.
Also in function call it just once and keep as static variable.
2021-09-20 14:26:09 +02:00
Zdenek Kabelac
e15d1e53c1 gcc-fanalyzer: notices 'du' could be NULL
Ensure only nonNULL 'du' pointer is dereference altough the comment
to the last assign 'du' pointer already suggest 'NULL' case should not happen.
So just being explicit.

mer du
2021-09-20 10:51:30 +02:00
Zdenek Kabelac
3b2a4e3e6f cov: make it aware we need these headers for muslC 2021-09-13 12:34:41 +02:00
Zdenek Kabelac
63930f576a cov: add some initializers 2021-09-13 12:34:41 +02:00