IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix memory leak of field_id in _output_field function.
There's been a patch added recently to use dynamic allocation for metadata
tags buffer to remove the 4k limit (for writing metadata out). However, when
using reporting commands like vgs and lvs, we still need to fix libdm reporting
functions themselves to support such long outputs. So the buffer used in those
reporting functions is dynamic now.
The patch also includes a fix for field_id memory leak which was found in
the _output_field function.
Rather than hard code the size of the field, use a #define, so we can re-use.
The #define will be needed in a future patch when we extend the reporting
infrastructure to have 'get' and 'set' functions for each field, allowing
lvm2app functions which query any report field. In order to provide a
generic lookup based on the field id, we will define a type containing this
field id, and thus, we will need to re-use the length of this string as
it's defined inside libdevmapper.h.
We can't rely on the fact that udev should prepare the node with right major
and minor number to trigger the module autoloading. We have to take into
account that the node could be missing or it could exist with improper
major and minor number assigned (e.g. from previous kernel versions in
an environment with static nodes and without udev). Make any corrections
if needed!
udev_sync feature requires semaphores (part of System V IPC) to be configured
in kernel (CONFIG_SYSVIPC). Check whether it is supported and if not, give
a warning message and disable udev synchronisation code automatically to
avoid any further error states and associated problems.
One should use the kernel with System V IPC support enabled or libdevmapper
with udev_sync feature disabled.
There was missing "revert" call in _create_and_load_v4 fn while the preparation
for table load ends up with failure in create/load/resume sequence. Otherwise
we could end up with a device being created, but not table-loaded nor resumed.
Even though the table is not loaded and the device is not resumed at this
stage, we still need to synchronize with udev when calling the revert
"remove" ioctl - there's still a remove uevent generated! The "revert"
code does exactly that.
mirrors, we must also check that the log daemon (cmirrord) is running.
The log module can be auto-loaded, but the daemon cannot be
"auto-started". Failing to check for the daemon produces cryptic
messages that customers have a hard time deciphering. (The system
messages do report that the log daemon is not running, but people
don't seem to find this message easily.)
Here are examples of what is printed when the module is available,
but the log daemon has not been started.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg
Shared cluster mirrors are not available.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg -v
Setting logging type to disk
Finding volume group "vg"
Archiving volume group "vg" metadata (seqno 3).
Creating logical volume lv
Executing: /sbin/modprobe dm-log-userspace
Cluster mirror log daemon is not running
Shared cluster mirrors are not available.
Creating volume group backup "/etc/lvm/backup/vg" (seqno 4).
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
When using clustered mirrors, we need device nodes to be created during
processing of device tree, not at its end like we normally do (we need to
access the nodes in cmirror prematurely). Therefore we use a new flag called
"immediate_dev_node" stored in deptree's load_properties struct to instruct the
device tree processing code to immediately synchronize with udev and flush all
stacked node operations so the nodes are prepared for use.
For now, the immediate_dev_node is used for clustered mirrors during
processing the dm_tree_preload_children code only. We can add more later if
needed.
A kernel patch is on its way for 2.6.35 adding support for dm-mod module
autoload. Udev v155 and higher is able to read static node information given
in modules.devname (extracted by depmod before) and will create such nodes
at its start. The first access to such node will load the module automatically
(directly in kernel) before the actual read/write operation is processed.
For deactivation of Replicator check in advance that all heads
have open_count == 0. For this presuspend_node is used as all
head nodes are linking this control node.
Introducing dm_tree_node_set_presuspend_node() for presuspending child
node (i.e. replicator control target) before deactivation of parent node
(i.e. replicator-dev target).
This patch presents no functional change to current dtree - only
replicator target currently sets presuspend node for dev nodes.
Use Requires.private: instead of Libs.private:
Use UDEV_PC and SELINUX_PC for Require.private:
It looks like usage of Requires.private is prefered from Libs.private.
However pkg-config documentation is really poor here. But here is
short outcome:
There is a difference in Libs.private: and Requires.private: where
we specify libselinux instead of -lselinux -lsepol.
We leave resolving of query like 'pkg-config --libs --static devmapper'
on taking proper selinux and udev libs to their .pc files instead of
hardcoding them into our .pc file which is might give incorrect answer.
- i.e. dependency of libselinux package might change and we may return
wrong list of linked libraries.
http://bugs.freedesktop.org/show_bug.cgi?id=4738http://err.no/personal/blog/tech/2008-03-25-18-07_pkg-config,_sonames_and_Requires.private
(with table provided).
This remove ioctl generates udev events like any other hence it needs to be
synchronized properly as well. Also, add dm task type in debug log when
setting a cookie (for better debugging).
This rule appeared in udev v152 and it helps us to support spurious events
where we didn't have any flags set (events originated in udevadm trigger
or the watch rule). These flags are important to direct the rule application.
Now, with the help of this rule, we can regenerate old udev db content.
To implement this correctly, we need to flag all proper DM udev events with
DM_UDEV_PRIMARY_SOURCE_FLAG. That happens automatically for all ioctls
generating events originated in libdevmapper.
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
in clvmd, dmevend, man, tests.
Don't include dependency files for clow and cscope.out targets
Improve dependency tracking for dmeventd and liblvm2cmd sources.
to obtain sources. Create make.tmpl target for
simplier generation of cflow files with the help of
CFLOW_LIST, CFLOW_LIST_TARGET, CFLOW_TARGET.
Still cflow usage is not perfect.
This prevents some confusion when libudev was not found so udev_sync was disabled
automatically. Configure was successful though giving only a tiny warning.
Also, if "dmsetup udevcreatecookie" is used, never return 0x000000 as a result if
udev is not running and keep the output blank.
We need to know whether we should wait for any uevent or not when
using udev_sync. A kernel patch was posted recently that changed the
way uevents are sent on dm device resume - it is sent only if the
device has been suspended before. There's also a new DM_UEVENT_GENERATED_FLAG
in the ioctl to notify userspace whether the event was generated.
If the uevent was not generated (e.g. the situation where the device is
*not* suspended and we call a resume), we just call dm_udev_complete
explicitly from within libdevmapper itself to prevent infinite waiting
while trying to synchronise with udev processing.
For static builds dependency for SELinux libs is not handled by 'ar'.
Till better solution is found, for static builds STATIC_LIBS is used.
Patch updates SELinux detection to use 3rd & 4th parameter for Success/Fail.
Also removes detection of pthread from this check as we know which
version of libdevmapper we are going to link with lvm after merge.
SELinux header check moved to the SELinux test code.
- add DM_UDEV_DISABLE_LIBRARY_FALLBACK udev flag to rely on udev only
- export dm_udev_create_cookie function to create new cookies on demand
- add --udevcookie, udevcreatecookie and udevreleasecookie for dmsetup
(to support "udev transactions" where one cookie value can be used for
several dmsetup calls)
- don't use DM_UDEV_DISABLE_CHECKING env. var. anymore and set the state
automatically (based on udev and libdevmapper dev path comparison)
that were necessary to be passed on to userspace.
The cluster mirror table (log portion only) used to look like this:
clustered-disk <parm_count> <disk> <region_size> <uuid> \
[[no]sync] [block_on_error]
Now it looks like this:
userspace <parm_count> <uuid> clustered-disk <disk> <region_size> \
[[no]sync]
So, there is one extra argument in the latter case - this was
unaccounted for.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Introduces new libdevmapper function dm_tree_node_add_snapshot_merge_target
Verifies that the kernel (dm-snapshot) provides the 'snapshot-merge'
target.
Activate origin LV as snapshot-merge target. Using snapshot-origin
target would be pointless because the origin contains volatile data
while a merge is in progress.
Because snapshot-merge target is activated in place of the
snapshot-origin target it must be resumed after all other snapshots
(just like snapshot-origin does) --- otherwise small window for data
corruption would exist.
Ideally the merging snapshot would not be activated at all but if it is
to be activated (because snapshot was already active) it _must_ be done
after the snapshot-merge. This insures that DM's snapshot-merge target
will perform exception handover in the proper order (new->resume before
old->resume). DM's snapshot-merge does support handover if the reverse
sequence is used (old->resume before new->resume) but DM will fail to
resume the old snapshot; leaving it suspended.
To insure the proper activation sequence dm_tree_activate_children() was
updated to accommodate an additional 'activation_priority' level. All
regular snapshots are 0, snapshot-merge is 1, and merging snapshot is 2.
Sometimes it is really needed to switch off udev checking and the warnings we show when
we detect that udev has not done its job right - the messages like "Udev should have done
this and that. Falling back to direct node creation/removal. " etc.
This would be especially handy while setting DM_DEV_DIR env var that could be set to a
different location than standard /dev (udev can't create nodes/symlinks out of that one
directory that is configured into udevd). The exact same situation happens while we're
running our tests.
dm_tree_activate_children() callers.
Otherwise resume_lv and its variants can fail silently.
Catching these failures is especially important now that dm targets like
crypt and snapshot-merge can fail in .preresume
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These are no longer used by anyone. The dm_list defines are all in
libdevmapper.h and libdm/datastruct/list.c contains any function definitions.
There is some code in "old-tests" that still use this but this code is not
being maintained.
Thanks to Zdenek for spotting this.
This provides better support for environments where udev rules are installed
but udev_sync is not compiled in (however, using udev_sync is highly
recommended). It also provides consistent and expected functionality even
when '--noudevsync' option is used.
There is still requirement for kernel >= 2.6.31 for the flags to work though
(it uses DM cookies to pass the flags into the kernel and set them in udev
event environment that we can read in udev rules).
'last_rule' option has been removed from udev (version >= 147).
From now on, we require foreign rules to check and honor
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG} instead. Foreign
rules should be skipped totally when this flag is set.
- we have these levels when the udev rules are processed:
10-dm.rules --> [11-dm-<subsystem>.rules] --> [12-dm-permissions.rules] -->
13-dm-disk.rules --> [...all the other foreign rules...] --> 95-dm-notify.rules
- each level can be disabled now by
DM_UDEV_DISABLE_{DM, SUBSYSTEM, DISK, OTHER}_RULES_FLAG
- add DM_UDEV_DISABLE_DM_RULES_FLAG to disable 10-dm.rules
- add DM_UDEV_DISABLE_OTHER_RULES_FLAG to disable all the other (non-dm) rules.
We cutoff these rules by using the 'last_rule', so this one should really be
used with great care and in well-founded situations. We use this for lvm's
hidden and layer devices now.
- add a parameter for add_dev_node, rm_dev_node and rename_dev_node so it's
possible to switch on/off udev checks
- use DM_UDEV_DISABLE_DM_RULES_FLAG and DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG
if there's no cookie set and we have resume, remove and rename ioctl.
This could happen when someone uses the libdevmapper that is compiled with
udev_sync but the software does not make use of it. This way we can switch
off the rules and fallback to libdevmapper node creation so there's no
udev/libdevmapper race.
confuses me, so I've added a comment at the top of the function to
remind me of this.
I also found that 'mirror_emit_segment_line' was returning 0 (return_0)
on failure /and/ success. It now returns 1 for success and 0 for failure -
just like '_emit_areas_line' and its calling function, '_emit_segment_line'.
We don't have to call dm_cookie_supported with dm_udev_get_sync_support
this way. Also, it's necessary for the current code to work properly on
systems without cookie support (older kernels).
Eliminate dependency on outside library, since the same functionality
exists in our tree.
[It is important that the bitops work in the same way, as the bitmaps
must remain backwards compatible. I haven't tested every architecture,
but the x86* archs work. My test involved using the old ext2fsprogs
bitops, memcpy'ing the bits over to the LVM bitset array and ensuring
that only the bits set via the old methods were set.]
