IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's possible for an LVM LV to use a device during activation which
then differs from device which LVM assumes based on metadata later on.
For example, such device mismatch can occur if LVM doesn't have
complete view of devices during activation or if filters are
misbehaving or they're incorrectly set during activation.
This patch adds code that can detect this mismatch by creating
VG UUID and LV UUID index while scanning devices for device cache.
The VG UUID index maps VG UUID to a device list. Each device in the
list has a device layered above as a holder which is an LVM LV device
and for which we know the VG UUID (and similarly for LV UUID index).
We can acquire VG and LV UUID by reading /sys/block/<dm_dev_name>/dm/uuid.
So these indices represent the actual state of PV device use in
the system by LVs and then we compare that to what LVM assumes
based on metadata.
For example:
[0] fedora/~ # lsblk /dev/sdq /dev/sdr /dev/sds /dev/sdt
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdq 65:0 0 104M 0 disk
|-vg-lvol0 253:2 0 200M 0 lvm
`-mpath_dev1 253:3 0 104M 0 mpath
sdr 65:16 0 104M 0 disk
`-mpath_dev1 253:3 0 104M 0 mpath
sds 65:32 0 104M 0 disk
|-vg-lvol0 253:2 0 200M 0 lvm
`-mpath_dev2 253:4 0 104M 0 mpath
sdt 65:48 0 104M 0 disk
`-mpath_dev2 253:4 0 104M 0 mpath
In this case the vg-lvol0 is mapped onto sdq and sds becauset this is
what was available and seen during activation. Then later on, sdr and
sdt appeared and mpath devices were created out of sdq+sdr (mpath_dev1)
and sds+sdt (mpath_dev2). Now, LVM assumes (correctly) that mpath_dev1
and mpath_dev2 are the PVs that should be used, not the mpath
components (sdq/sdr, sds/sdt).
[0] fedora/~ # pvs
Found duplicate PV xSUix1GJ2SK82ACFuKzFLAQi8xMfFxnO: using /dev/mapper/mpath_dev1 not /dev/sdq
Using duplicate PV /dev/mapper/mpath_dev1 from subsystem DM, replacing /dev/sdq
Found duplicate PV MvHyMVabtSqr33AbkUrobq1LjP8oiTRm: using /dev/mapper/mpath_dev2 not /dev/sds
Using duplicate PV /dev/mapper/mpath_dev2 from subsystem DM, ignoring /dev/sds
WARNING: Device mismatch detected for vg/lvol0 which is accessing /dev/sdq, /dev/sds instead of /dev/mapper/mpath_dev1, /dev/mapper/mpath_dev2.
PV VG Fmt Attr PSize PFree
/dev/mapper/mpath_dev1 vg lvm2 a-- 100.00m 0
/dev/mapper/mpath_dev2 vg lvm2 a-- 100.00m 0
Add "size" and "size_seqno" to struct device to cache device's size
and also to control its lifetime - the cached value is valid as long
as the global _dev_size_seqno is equal to the device's size_seqno,
otherwise we need to get the size again and cache the new value.
This patch also adds new dev_size_seqno_inc() fn for the appropriate
parts of the code to increment current global value of _dev_size_seqno
and hence to cause all currently cached values for device sizes to
be invalidated.
The device size is now cached because we're planning to reuse this
information for further checks and we want to avoid checking it more
than necessary to save resources.
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
Changes:
- move device type registration out of "type filter" (filter.c)
to a separate and new dev-type.[ch] for common use throughout the code
- the structure for keeping the major numbers detected for available
device types and available partitioning available is stored in
"dev_types" structure now
- move common partitioning detection code to dev-type.[ch] as well
together with other device-related functions bound to dev_types
(see dev-type.h for the interface)
The dev-type interface contains all common functions used to detect
subsystems/device types, signature/superblock recognition code,
type-specific device properties and other common device properties
(bound to dev_types), including partitioning support.
- add dev_types instance to cmd context as cmd->dev_types for common use
- use cmd->dev_types throughout as a central point for providing
information about device types
One shiny day we should use libblkid here. But now using LUKS is
very common together with LVM and pvcreate destroys LUKS completely.
So for user's convenience, try to detect LUKS signature and allow abort.
We can already detect MD devices internally. But when using MD partitions,
these have "block extended major" (blkext) assigned (259). Blkext major
is also used in general, so we need to check whether the original device
is an MD device actually.
Rename private _primary_dev() to a public get_primary_dev() and reuse it
to allow retrieval of the MD sysfs attributes (raid level, etc) for MD
partitions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Adds 'data_alignment_detection' config option to the devices section of
lvm.conf. If your kernel provides topology information in sysfs (linux
>= 2.6.31) for the Physical Volume, the start of data area will be
aligned on a multiple of the ’minimum_io_size’ or ’optimal_io_size’
exposed in sysfs.
minimum_io_size is used if optimal_io_size is undefined (0). If both
md_chunk_alignment and data_alignment_detection are enabled the result
of data_alignment_detection is used.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we are stacking LV over device, which has for some reason
increased read_ahead (e.g. MD RAID), the read_ahead hint
for libdevmapper is wrong (it is zero).
If the calculated read_ahead hint is zero, patch uses read_ahead of underlying device
(if first segment is PV) when setting DM_READ_AHEAD_MINIMUM_FLAG.
Because we are using dev-cache, it also store this value to cache for future use
(if several LVs are over one PV, BLKRAGET is called only once for underlying device.)
This should fix all the reamining problems with readahead mismatch reported
for DM over MD configurations (and similar cases).
Additional verbosity level -vvvv includes line numbers and backtraces.
Verbose messages now go to stderr not stdout.
Close any stray file descriptors before starting.
Refine partitionable checks for certain device types.
Allow devices/types to override built-ins.
Clear many compiler warnings (i386) & associated bugs - hopefully without
introducing too many new bugs:-) (Same exercise required for other archs.)
Default compilation has optimisation - or else use ./configure --enable-debug
Lots of changes/very little testing so far => there'll be bugs!
Use 'vgcreate -M text' to create a volume group with its metadata stored
in text files. Text format metadata changes should be reasonably atomic,
with a (basic) automatic recovery mechanism if the system crashes while a
change is in progress.
Add a metadata section to lvm.conf to specify multiple directories if
you want (recommended) to keep multiple copies of the metadata (eg on
different filesystems).
e.g. metadata {
dirs = ["/etc/lvm/metadata1","/usr/local/lvm/metadata2"]
}
Plenty of refinements still in the pipeline.
