IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Adding configure.in support for Replicators.
Adding basic lib lvm support for Replicators.
Adding flags REPLICATOR and REPLICATOR_LOG.
Adding segments SEG_REPLICATOR and SEG_REPLICATOR_DEV.
Adding basic methods for handling replicator metadata.
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.
When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.
This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).
This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.
The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
When moving parts of striped LVs, pvmove wouldn't care about leaving you with
two stripes on the same disk. Now --alloc anywhere is needed for that.
(Tried and gave up on two alternative approaches before the one committed here.)
Small refactor of main places in the code where a pv is added to a
vg into a small function which adds the pv to the list and updates
the vg counts.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Simple refactor to mov code that updates the vg extent counts from a
single pv's counts close to the code that adds a pv to vg->pvs and
updates vg->pv_count. No functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Physical segments were still allocated from global
command context mempool.
This leads to very high memory usage when
activating large VG (vgchange).
(Memory usage was about 2G when >3000LVs).
Fix it by properly using vg->vgmem private pool,
so all the memory is released early.
New memory pool parameter is needed here for pv_split_segment
function.
Also fix the same problem in some minor allocations
(vg description, lv segment split).
The _read_vg uses already hash for PVs to optimise
reading of large VGs and avoiding repeated PV list traversing.
Use the same aproach to speed up parsing VG with many LVs.
Eliminate 'merging_snapshot' from 'struct logical_volume' and just use
'snapshot' for origin lv's reference to the merging snapshot; also set
MERGING in the origin lv's status.
Make 'merging_snapshot' pointer that points from the origin to the
segment that represents the merging snapshot.
Import/export 'merging_store' metadata.
Do not allow creating snapshots while another snapshot is merging.
Snapshot created in this state would certainly contain invalid data.
NOTE: patches at the end of this series will remove 'merging_snapshot'
and will introduce helpful wrappers and cleanups.
At this point they probably do not matter but going forward they
may - depends on future patches for replicator, etc. I think
these probably got missed because they were 'flags' so I changed
the name to 'status' to be consistent. So the on-disk
things 'flags' and the in structure 'status' (bits).
NOTE: WHATS_NEW already has entry for this in current release.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.
The alignment of these structures was also audited to remove holes. The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes. The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes. Each
structures' size has not changed.
indented metadata lines.
Macro outnl() is using exported out_newline() instead of direct
call f->fn(), that required the visibility of the internal
struct formatter.
This patch is all just cleanup and no other patch depends on it.
Replace explicit dereference and check with vg_is_exported().
Update a few copyrights and remove unnecessary whitespace.
Should be no functional change.
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Documented which use-cases force the reinstatement of the nuanced
handling of pe_start. As soon as orphan PVs are eliminated much of this
will no longer be a concern ('preserve_pe_start' can be reenabled in
.pv_setup).
Added defensive 'if (pv->pe_align)' check in _text_pv_write()'s pe_start
loop.
If pv_setup was given a non-zero pe_start it would short-circuit
establishing a default pv->pe_align. pv->pe_align=0 would result
in a divide by zero in _mda_setup(). 'vgconvert -M2 $vgname' hit this.
.pv_write still properly preserves pe_start if it was supplied.
Adds pe_align_offset to 'struct physical_volume'; is initialized with
set_pe_align_offset(). After pe_start is established pe_align_offset is
added to it.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
areas.
This preserved pe_start would quickly be readjusted to follow the first
mda anyway. An example use-case that hit this code path is: running
pvcreate on an already existing PV _without_ a preceeding pvremove.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Without this fix rounding the end of the first mda to a pe_align
boundary could silently exceed the disk_size.
Final 'if (start1 + mda_size1 > disk_size)' block serves as a safety
net.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Document existing pe_start policy.
Fix issue in _text_pv_setup() where existing pe_start case could have
the pv->pe_start set to pv->pe_align even though pe_start shouldn't ever
change.
vgconvert and pvcreate have a facility to preserve the existing start
of the on-disk data extents, known as pe_start.
They indicate this by passing the existing value to the pvsetup function
which must preserve it.
This patch avoids one particular case where the value could get
changed incorrectly now that the alignment settings are configurable.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This function behaves a little bit different than vg_reduce_single, because
it allowes to remove even the latest pv. This has been done to be consistent
to lvm_vg_create, which creates an empty vg.
removed_pvs has been added to the volume_group struct. vg_reduce adds remove
pvs to this list to be able to commit the changes for the pvs in lvm_vg_comm
in liblvm2app.
Initialize removed_pvs list in format-specific volume_group constructors.
Ideally, we should have a base constructor here that initializes the general
non-format specific members of struct volume_group. But until then, there
are multiple places to initialize these members. Maybe a better patch would
be a base constructor patch for struct volume_group. That is more work
though.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Currently code uses pv_dev_name() for hash when getting internal
"pvX" name.
This produce corrupted metadata if PVs are missing, pv->dev
is NULL and all these missing devices returns one name
(using "unknown device" for all missing devices as hash key).
link_lv_to_vg and unlink_lv_from_vg are the only functions
for adding/removing logical volume from volume group.
Only these function should manipulate with vg->lvs list.
The snapshot segment (snapshotX) is created twice
during the text metadata segment processing.
This can cause temporary violation of max_lv count.
Simplify the code, snapshot segment is properly initialized
in init_snapshot_seg function now and do not need to be replaced
by vg_add_snapshot call.
The vg_add_snapshot() is now usefull only for adding new
snapshot and it shares the same initialization function.
The snapshot name is always generated, name paramater can be
removed from function call.
The dataalign value must always be aligned according
to MDA area.
The currect code checks if calculated value collides with
MDA area but not if the value is so small that it is
located before MDA starts.
Unfortunatelly there can be also MDA in the end of the device.
The patch adds simple check to avoid this miscalculation.
Patch expects that first MDA always starts on <= pagesize boundary
(this is true for all allowed label sector parameters).
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.
Still a few rough edges, but hopefully usable now:
lvcreate -s vg1 -L 100M --virtualoriginsize 1T
