IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixing vpath usage as it has been checking for existance of
generated file also in the $(scrdir) e.g.:
No need to remake target '10-dm.rules.in'; using VPATH name '...'
If the $(srcdir) had been also $(builddir) and contained already
generated rules file, it's been used instead generating new
one.
(See: http://make.mad-scientist.net/papers/how-not-to-use-vpath/)
Commit abd9618dd8 tried to improve
parsing of vg name from logical path - but still missed couple
corner cases.
This patch further improves the logic and reuses
validate_lvname_param() for parsing of lv_name.
Also explicitly checks for LVM_VG_NAME in the right case.
So now also properly parses cases like:
'lvconvert --repairt vg/'
and will provide correct error message.
Specifying an output width of 0 now leads to a default minimum width
taken from the width of the column heading. (Most fields should use
this.)
Components of field names are generally separated by underscores (which
are optional at run-time). (Dropped 3 duplicate fields now covered by
this rule.)
Each field heading must be unique and generally doesn't have spaces
between words (which get capitalised) unless they are already short and
the fields are normally longer or clarity demands it.
This command option can be used to trigger a D-Bus
notification independent of the usual notifications
that are sent from other commands as an effect of
changes to PV/VG/LV state. If lvm is not built with
dbus notification support or if notify_dbus is disabled
in the config, this command will exit with an error.
When a command modifies a PV or VG, or changes the
activation state of an LV, it will send a dbus
notification when the command is finished. This
can be enabled/disabled with a config setting.
Pair kernel_cache_settings with kernel_cache_policy.
There is very small chance in error case that the value in table
might be differnet from the value stored in metadata
so make it 'checkable'.
Showing 'u' in the pv_attr reporting field is mostly unnecessary because
most PVs are allocatable, and being allocatable implies it is (u)sed,
and this is already obvious from other fields in the default 'pvs'
output like the VG name.
So move the new (u)sed pv_attr from character position 4 to 1, and only
show it in those rare cases when the PV is not (a)llocatable or the
relevant metadata is missing.
(Scripts should not be using pv_attr, but rather pv_allocatable,
pv_exported, pv_missing, pv_in_use etc.)
Correct name is lvm2-lvmdbusd.service not lvmdbusd.service.
This makes the bus-activation (auto-activation) work.
Signed-off-by: Vratislav Podzimek <vpodzime@redhat.com>
Since we want to read env LVM_VG_NAME vg names,
we cannot just check LV names which do contain '/'.
So before the patch commands like:
> lvconvert --repair vg
Before:
Please provide a valid volume group name
After:
Path required for Logical Volume "vg".
Please provide a valid volume group name
> LVM_VG_NAME=vg lvconvert --repair vg
Before:
Please provide a valid volume group name
After:
Can't find LV vg in VG vg
Commit ca878a3426 introduced an issue
that zero sized extesion suddenly started to be accepted and
missed to return error.
Properly check invalid input values for sizes.
Reshuffle messages during pvremove.
Always print WARNING: when PV is in use so using options
--force --force doesn't make this important user
notification go away.
Simplify variable 'used' usage (so older gcc doesn't warn
about the use of unitilizied variable).
Add some '.' into messages.
Currently it's been checked for 'zero' header for thin-pool,
but lets use it always for cache as well - since it's relatively 'cheap'
detection of read 'error' problems as thin/cache tools
currently do not work fast enough in this case.
When update fails in suspend() (sending of messages
fails because metadata space is full) call resume(),
so the locking sequence works properly for clustering.
Also failing deactivation should unlock memory.
Fix reporting of Fail thin-pool target status
as attr[8] letter 'F'.
Report 'needs_check' status from thin-pool target via
attr field [4] (letter 'c'/'C'), and also via CheckNeeded field.
TODO: think about better name here?
TODO: lots of prop_not_implemented_set
If we know that a PV belongs to some VG and we're missing metadata
(because we have only those PV(s) from VG present in the system that
don't have metadata areas), we should skip such PV when processing
under system ID.
This is because we know that the PV belongs to some VG, but we
really can't decide whether it matches system ID unless the VG
metadata is present again.
This is a hotfix for a bug introduced in
6d7dc87cb3.
The bug description: First we allocate memory for
processing handle (at an address 1) then we
allocate some memory on the same pool for later use
in pvmove_poll function inside the process_each_pv
function (at an address 2). After we jump out of
process_each_pv we called destroy_processing_handle.
As a result of destroying the handle memory pool could
deallocate all memory at address 1 or higher. The
pvmove_poll function tried to copy a memory allocated
at address 2 that could be returned to the system.
If it was so it led to segfault.
We need to rethink proper fix but in the same time
cmd->mem pool is recreated per each lvm command so
this should not cause problems even when we run
multiple commands in lvm shell.
A valgrind snapshot of the corruption:
Invalid read of size 1
at 0x4C29F92: strlen (mc_replace_strmem.c:403)
by 0x5495F2E: dm_pool_strdup (pool.c:51)
by 0x1592A7: _create_id (pvmove.c:774)
by 0x159409: pvmove_poll (pvmove.c:796)
by 0x1599E3: pvmove (pvmove.c:931)
by 0x15105B: lvm_run_command (lvmcmdline.c:1655)
by 0x1523C3: lvm2_main (lvmcmdline.c:2121)
by 0x1754F3: main (lvm.c:22)
Address 0xf15df8a is 138 bytes inside a block of size 8,192 free'd
at 0x4C28430: free (vg_replace_malloc.c:446)
by 0x5494E73: dm_free_wrapper (dbg_malloc.c:357)
by 0x5495DE2: _free_chunk (pool-fast.c:318)
by 0x549561C: dm_pool_free (pool-fast.c:151)
by 0x164451: destroy_processing_handle (toollib.c:1837)
by 0x1598C1: pvmove (pvmove.c:903)
by 0x15105B: lvm_run_command (lvmcmdline.c:1655)
by 0x1523C3: lvm2_main (lvmcmdline.c:2121)
by 0x1754F3: main (lvm.c:22)
'verbose' was marked as a boolean option while it
takes integer args - so it has limited usage to 0 or 1,
but we supported 0-4 at least.
Fix it by switching to corrent int type.
(Hopefully noone was trying to use this variable as true/yes/false/no
way - as the would be unsupported/undocumented).
Reporter noticed lvm2 incorrectly translated
lvm2 threshold value to water mark in commit:
99237f0908
Fix it by properly translating size to number of
blocks in thin-pool and then calc for free blocks
matching configured lvm2 threshold value.
Reported-by: Ming-Hung Tsai <mingnus@gmail.com>
Normally, we generate and provide lvm.conf file where use_blkid_wiping
is set based on whether support for this is compiled in or not. This was
generated properly based on configure.
However, if lvm.conf is not used at all (someone deletes it) or the value
in lvm.conf is commented out (user edited it), we still need to use
proper default value that is based on DEFAULT_USE_BLKID_WIPING taken
from configure script - we used hardcoded value of "1" in this case
by mistake.
We already do check for suspended devs within udev rules where
the pvscan is to update lvmetad. So the check for suspended devs
in "pre-lvmetad" chain is not useful here - remove it - it may
be a source of hardly to detect races anyway (if udev rule detects
the device is not suspended and then the pvscan instance sees the
dev as suspended, we may end up not reacting to the event properly).
Non-dm devices have ID_PART_TABLE_TYPE variable exported in
udev db from blkid scan for *both* whole devices and partitions.
We used ID_PART_ENTRY_DISK in addition to decide whether this
is the whole device or partition and then we filtered out only
whole devices where the partition table really is.
However, ID_PART_ENTRY_DISK was added in blkid 2.20 so we need
to use a different set of variables to decide on whole devices
and partitions on systems where older blkid is still used.
Now, we use ID_PART_TABLE_TYPE to detect that there's something
related to partitioning with this device and we use DEVTYPE variable
instead to decide between whole device (DEVTYPE="disk") and partition
(DEVTYPE="partition").
For dm devices it's simpler, we have ID_PART_TABLE_TYPE variable\
set in udev db for whole devices. It's not set for partitions,
hence we don't need more variable in addition to make the decision
on whole device vs. partition (dm devices do not have regular
partitions, hence DEVTYPE can't be used anyway, it's always set
to "disk" for whole disks and partitions).
Add "size" and "size_seqno" to struct device to cache device's size
and also to control its lifetime - the cached value is valid as long
as the global _dev_size_seqno is equal to the device's size_seqno,
otherwise we need to get the size again and cache the new value.
This patch also adds new dev_size_seqno_inc() fn for the appropriate
parts of the code to increment current global value of _dev_size_seqno
and hence to cause all currently cached values for device sizes to
be invalidated.
The device size is now cached because we're planning to reuse this
information for further checks and we want to avoid checking it more
than necessary to save resources.
Fix regression caused by c9f021de0b.
This commit actually transfered real-action (e.g. device removal)
into the next loop which has however missed to check for break.
So add check for break also there.
When creating a list in 'context of command' - use proper mempool.
vg->vgmem is mempool related to VG metadata - and can be eventually
locked read-only when VG struct is shared.
W: manual-page-warning /usr/share/man/man8/lvm.8.gz 491: warning: macro `_cdata',' not defined
rpmlint actually notices we had few hidden word in man page.
the line cannot start with apostrophe as it has then a different
meaning.
If not using explicit --enable-blkid-wiping/--disable-blkid-wiping
configure option, the configure script tries to enable/disable blkid
wiping feature automatically based on blkid library version found.
The script incorrectly set default value for lvm.conf's
allocation/use_blkid_wiping" setting to "1" (enabled) if proper
blkid library version was not found or the version found was less
than the minimum required. It should be set to "0" in this case.
Since commit 2fc126b00d, the library
code requires udev to be initialised for device scanning and
clvmd can fail to find VGs if devices/external_device_info_source
is set to "udev".
There are two basic groups of fields for LV segment device reporting:
- related to LV segment's devices: devices and seg_pe_ranges
- related to LV segment's metadata devices: metadata_devices and seg_metadata_le_ranges
The devices and metadata_devices report devices in this format:
"device_name(extent_start)"
The seg_pe_ranges and seg_metadata_le_ranges report devices in
this format:
"device_name:extent_start-extent_end"
This patch reverts partly what commit 7f74a99502
(v 2.02.140) introduced in this area - it added [] for
hidden devices to mark them for all four fields mentioned above.
We won't be marking hidden devices in devices and metadata_devices
fields.
The seg_metadata_le_ranges field will have hidden devices marked -
it's new enough that we don't need to care about compatibility much
yet.
The seg_pe_ranges is old enough that we shouldn't be changing this
one - so we're reverting to not marking hidden devices here.
Instead, there's going to be a new field "seg_le_ranges" which
is going to replace the seg_pe_ranges and it will mark hidden devices -
this is going to be introduced in a patch later.
So in the end we'll end up with:
(LV segment's devices)
devices field with "device_name(extent_start)" format, not marking hidden devices
seg_pe_ranges field with "device_name:extent_start-extent_end" format, not marking hidden devices (deprecated, new seg_le_ranges should be used instead for standardized format)
seg_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices
(LV segment's metadata devices)
metadata_devices field with "device_name:extent_start-extent_end" format, not marking hidden devices
seg_metadata_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices
Also, both seg_le_ranges and seg_metadata_le_ranges will honour the
report/list_item_separator setting which can be used to configure
the delimiter used for list items.
So, to sum it up, we will recommend using the new seg_le_ranges and
seg_metadata_le_ranges fields because they display devices with
standard extent range format, they can mark hidden devices and they
honour the report/list_item_separator setting.
We'll be keeping devices,seg_pe_ranges and metadata_devices fields
for compatibility.
When reporting on LVs, take the end of the range from the size of the
underlying (hidden) LV rather than the logical size of the current
segment (that PVs use).
Existing cache_settings field displays the settings which are
saved in metadata. Add new kernel_cache_settings fields to display
the settings which are currently used by kernel, including fields
for which default values are used.
This way users have complete view of the set of cache settings
supported (and which they can set) and their values which are used
at the moment by kernel.
For example:
$ lvs -o name,cache_policy,cache_settings,kernel_cache_settings vg
LV Cache Policy Cache Settings KCache Settings
cached1 mq migration_threshold=1024,write_promote_adjustment=2 migration_threshold=1024,random_threshold=4,sequential_threshold=512,discard_promote_adjustment=1,read_promote_adjustment=4,write_promote_adjustment=2
cached2 smq migration_threshold=1024 migration_threshold=1024
cached3 smq migration_threshold=2048
Fix lvm2app to return either 0 or 1 for lvm_vg_is_{clustered,exported},
including internal functions pvseg_is_allocated and vg_is_resizeable
which are not yet exposed in lvm2app but make them consistent with the
rest.
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
Use common _lvname_disp to report lv_parent. The _lvname_disp
takes care of properly marking LVs which are not visible - such
LVs are always enclosed in brackets when reported within any
other field.
For example, thin pool over RAID.
Before:
$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
LV Parent Data Meta
cache_pool [cache_pool_tdata] [cache_pool_tmeta]
[cache_pool_tdata] cache_pool
[cache_pool_tdata_rimage_0] cache_pool_tdata
[cache_pool_tdata_rimage_1] cache_pool_tdata
[cache_pool_tdata_rmeta_0] cache_pool_tdata
[cache_pool_tdata_rmeta_1] cache_pool_tdata
[cache_pool_tmeta] cache_pool
[cache_pool_tmeta_rimage_0] cache_pool_tmeta
[cache_pool_tmeta_rimage_1] cache_pool_tmeta
[cache_pool_tmeta_rmeta_0] cache_pool_tmeta
[cache_pool_tmeta_rmeta_1] cache_pool_tmeta
[lvol0_pmspare]
With this patch applied:
$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
LV Parent Data Meta
cache_pool [cache_pool_tdata] [cache_pool_tmeta]
[cache_pool_tdata] cache_pool
[cache_pool_tdata_rimage_0] [cache_pool_tdata]
[cache_pool_tdata_rimage_1] [cache_pool_tdata]
[cache_pool_tdata_rmeta_0] [cache_pool_tdata]
[cache_pool_tdata_rmeta_1] [cache_pool_tdata]
[cache_pool_tmeta] cache_pool
[cache_pool_tmeta_rimage_0] [cache_pool_tmeta]
[cache_pool_tmeta_rimage_1] [cache_pool_tmeta]
[cache_pool_tmeta_rmeta_0] [cache_pool_tmeta]
[cache_pool_tmeta_rmeta_1] [cache_pool_tmeta]
[lvol0_pmspare]
Fix regression caused by commit c2d4330f27
which removed the dm_pool_strdup for the cache policy name in
_cache_policy_disp report function.
This regression was hit with buffered reporting only (which is
used by default). The reason is that for buffered reporting, we're
iterating over LVs in VG (process_each_lv) while gathering
all the information that is needed for the report. In this case,
the LV's cache policy name has not been duped, but only the pointer
to the original VG buffer was stored. When the LV iteration finished,
the VG buffer was freed and any report to output called later
(dm_report_output call) accessed already freed VG data.
This didn't appear if unbuffered reporting was used (--unbuffered)
because in this case, the data were reported to output as
soon as they were processed, hence it was reported to output
before the VG data was freed.
The lvm2-activation{-early,-net}.service systemd unit statuses were missing
in dump gathered by lvmdump -s. These are quite important when debugging
scenarios with systemd environment and where lvmetad is not used.
Pass full buffer size to printf() function - no reason to make
buffer 1 char smaller.
Also rename locn buffer to message buffer directly since it's
not used for anything else.
TODO: we may use same buffer also for 'buf[]' since there is
no collision - so may safe 1K on stack usage.
Just for convenience to display all new configuration settings
introduced since given version (before, there was only --atversion
to display settings introduced in concrete version).
For example:
$ lvmconfig --type new --sinceversion 2.2.120
allocation {
# cache_mode="writethrough"
# cache_settings {
# }
}
global {
use_lvmlockd=0
# lvmlockd_lock_retries=3
# sanlock_lv_extend=256
use_lvmpolld=1
}
activation {
}
# report {
# compact_output_cols=""
# time_format="%Y-%m-%d %T %z"
# }
local {
# host_id=0
}
When 'lvextend -L+XX vg/thinpool' do not leave inactive table
loaded for 'wrapping' LV on top of resized thin-pool
(ATM we use linear LV for this with same size as thin-pool).
Udev recently start to 'link-in' major amount of useless libs.
(Seem to be faulty 'systemd' link-in all issue)
Anyway - avoid locking those libs in RAM.
Avoid internal error message where thin pool repair code tries to
fix cache pool - was catched later in code stack, so rather
catch this early and make the repair function exlusive
to thin pools.
So far we have no code for repairing cache pools
(other then the automatic during activation/deactivation).
When reading older lvm2 metadata for cache-pool - we now handle more
extended syntax - basically we want to enter most setting when
actually creating cached LV.
For this new validation code has been added. However older metadata
without new settings set is now found as invalid.
Fix it by adding default settings for cache policy mq
and cache mode writethrough.
Udev db records are marked as not initialized (incomplete) on timeout.
Issue an error message whenever LVM finds such records so users are
aware that something's going wrong with udev db.
This is important in case we use devices/external_device_info_source="udev"
where udev database records are used to do various filtering decisions.
For example:
udev log of timed out worker:
Nov 11 13:02:25 raw.virt systemd-udevd[607]: seq 1997 '/devices/virtual/block/dm-2' is taking a long time
Nov 11 13:04:25 raw.virt systemd-udevd[607]: seq 1997 '/devices/virtual/block/dm-2' killed
Nov 11 13:04:25 raw.virt systemd-udevd[607]: worker [11221] terminated by signal 9 (Killed)
Nov 11 13:04:25 raw.virt systemd-udevd[607]: worker [11221] failed while handling '/devices/virtual/block/dm-2'
...
LVM also issues error message visibly if incomplete udev db record is found,
devices/external_device_info_source="udev" is set:
$ pvs
Udev database has incomplete information about device /dev/dm-2.
Failed to get external handle for device /dev/dm-2 [udev].
...
