IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Introduce enum dev_io_reason to categorise block device I/O
in debug messages so it's obvious what it is for.
DEV_IO_SIGNATURES /* Scanning device signatures */
DEV_IO_LABEL /* LVM PV disk label */
DEV_IO_MDA_HEADER /* Text format metadata area header */
DEV_IO_MDA_CONTENT /* Text format metadata area content */
DEV_IO_FMT1 /* Original LVM1 metadata format */
DEV_IO_POOL /* Pool metadata format */
DEV_IO_LV /* Content written to an LV */
DEV_IO_LOG /* Logging messages */
vgsplit shares the vg_rename code so that must only set the PV_MOVED_VG
flag introduced in commit 486ed10848
("vgmerge: Fix intermediate metadata corruption") on PVs that moved.
API for strtod() or strtoul() needs reset of errno, before it's being
called. So add missing resets in missing places and some also some
errno validation for out-of-range numbers.
Basically code moving operation to have a single place resolving
thin_pool_chunk_size_policy.
Supported are generic & performance profiles.
Function is now shared between thin manipulation code and configuration
_CFG logic to obtain defaults and handle correct reporting upward coding
stack.
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).
When user is aware of related possible troubles he
may increase the limit in lvm.conf.
Also verbosely inform user about possible solution.
Code works for both lvcreate and lvconvert.
Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
Some settings are not suitable for override in interactive/shell
mode because such settings may confuse the code and it may end
up with unexpected behaviour. This is because of the fact that
once we're in the interactive/shell mode, we have already applied
some settings for the shell itself and we can't override them
further because we're already using those settings to drive the
interactive/shell mode. Such settings would get ignored silently
or, in worse case, they would mess up the existing configuration.
Just for convenience to display all new configuration settings
introduced since given version (before, there was only --atversion
to display settings introduced in concrete version).
For example:
$ lvmconfig --type new --sinceversion 2.2.120
allocation {
# cache_mode="writethrough"
# cache_settings {
# }
}
global {
use_lvmlockd=0
# lvmlockd_lock_retries=3
# sanlock_lv_extend=256
use_lvmpolld=1
}
activation {
}
# report {
# compact_output_cols=""
# time_format="%Y-%m-%d %T %z"
# }
local {
# host_id=0
}
Here Coverity cannot see the pointer cannot be NULL in this
code path - opened coverity case #00531860.
We could make a model to avoid seeing related reports,
but then we loose coverage for modeled function.
So decided to add minor hint for this case.
Before printing a commented automatic config value,
print a line describing what it is. Otherwise, the
commented value can look like it's a part of an
example preceding it.
Move code which runtime detects settings for cache_policy
out of config dir to cache seg handling code.
Also mark cache_mode as command profilable setting.
Add new profilable configurables:
allocation/cache_policy
allocation/cache_settings
and mark allocation/cache_pool_chunk_size as profilable as well.
Obsolete allocation/cache_pool_cachemode and
introduce new allocation/cache_mode instead.
Rename DEFAULT_CACHE_POOL_POLICY to DEFAULT_CACHE_POLICY.
The CFG_SECTION_NO_CHECK flag can be used to mark a section
and its whole subtree as containing settings where checks
won't be made (lvmconfig --validate).
These are setting where we don't know the names and and type
in advance and they're recognized in runtime. As we don't know
the type and name in advance, we can't do any checks here
of course.
Use this flag with great care as it disables config checks
for the whole config subtree found under such section.
This flag is going to be used by subsequent patches from
Zdenek to support some cache settings...
Commit 7e728fe1a1 added a log call
directly in find_config_tree_array when defaults are used.
This patch also adds the log for the value which is found in
existing configuration and for which defaults are not used.
For example:
Defaults used:
config/config.c:1428 devices/scan not found in config: defaulting to scan = [ "/dev" ]
Value defined in configuration used:
config/config.c:1431 Setting devices/scan to scan = [ "/dev", "/mydev", "/abc" ]
This makes the logging consistent with the other find_config_tree_* functions.
Before, we used general find_config_tree_node function to retrieve
array values. This had a downside where if the node was not found,
we had to insert default values directly in-situ after the
find_config_tree_node call. This way, we had two copies of default
values - one in config_settings.h and the other one directly in the
code where we found out that find_config_tree_node returned NULL and
hence we needed to fall back to defaults.
With separate find_config_tree_array used for array config values,
we keep all the defaults centrally in config_settings.h because
the new find_config_tree_array automatically returns these defaults
if it can't find any value set in the configuration.
This patch just makes the behaviour exactly the same for arrays as
for any other non-array type where we call find_config_tree_<type>
already, hence making the internal interface for handling array
values consistent with the rest of the config types.
Do not display settings with undefined default values, but do display
these settings in case the value is defined directly in any part of
the existing config cascade.
For example, the lvmconfig --type current always displays these settings
(as it's somewhere in "current" configuration cascade that makes it defined).
The lvmconfig --type full displays these settings only if it's defined
somewhere in the cascade, but not if default value is used instead
The lvmconfig --type default never displays these settings...
More concrete example - let's have activation/volume_list directly
set in lvm.conf and activation/read_only_volume_list not set.
Both of these settings have *undefined default* values.
$lvmconfig --type full activation/volume_list activation/read_only_volume_list
volume_list="/dev/vg/lv"
(...only volume_list is defined, hence it's printed)
However, the comments will display more info (see also previous commit):
$lvmconfig --type full activation/volume_list activation/read_only_volume_list --withsummary
# Configuration option activation/volume_list.
# Only LVs selected by this list are activated.
# This configuration option does not have a default value defined.
# Value defined in existing configuration has been used for this setting.
volume_list="/dev/vg/lv"
# Configuration option activation/read_only_volume_list.
# LVs in this list are activated in read-only mode.
# This configuration option does not have a default value defined.
Display comment abour value from existing config being used. For example:
$ lvmconfig --type full --withsummary report/compact_output report/buffered
# Configuration option report/compact_output.
# Do not print empty report fields.
# Value defined in existing configuration has been used for this setting.
compact_output=1
# Configuration option report/buffered.
# Buffer report output.
buffered=1
The lvmconfig --type full is actually a combination of --type current
and --type missing together with --mergedconfig options used.
The overall outcome is a configuration tree with settings as LVM sees
it when it looks for the values - that means, if the setting is defined
in some config source (lvm.conf, --config, lvmlocal.conf or any profile
that is used), the setting is used. Otherwise, if the setting is not
defined in any part of the config cascade, the defaults are used.
The --type full displays exactly this final tree with all the values
defined, either coming from configuration tree or from defaults.
We shouldn't be adding spaces by default in output as that
may be be used already in scripts and especially for the eval
in shell scripts where spaces are not allowed between key
and value!
Add --withspaces option to lvmconfig for pretty output with
more space in for readability.
There are two basic groups of formatting flags (32 bits):
- common ones applicable for all config value types (lower 16 bits)
- type-related formatting flags (higher 16 bits)
With this patch, we initially support four new flags that
modify the the way the config value is displayed:
Common flags:
=============
DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
to be enclosed in "[ ]" even if there's only one item
(previously, there was no way to recognize an array with one
item and scalar value, hence array values with one member
were always displayed without "[ ]" which libdm accepted
when reading, but it may have been misleading for users)
DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
be inserted in "key = value" (or key = [ value, value, ... ] in
case of arrays), compared to "key=value" seen on output before.
This makes the output more readable for users.
Type-related flags:
===================
DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
"0" as a prefix (libdm's config reading code can handle this via
strtol just fine so it's properly recognized as number in octal
form already if there's "0" used as prefix)
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
strings without enclosing " "
This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
This patch adds supporting code for handling deprecated settings.
Deprecated settings are not displayed by default in lvmconfig output
(except for --type current and --type diff). There's a new
"--showdeprecated" lvmconfig option to display them if needed.
Also, when using lvmconfig --withcomments, the comments with info
about deprecation are displayed for deprecated settings and with
lvmconfig --withversions, the version in which the setting was
deprecated is displayed in addition to the version of introduction.
If using --atversion with a version that is lower than the one
in which the setting was deprecated, the setting is then considered
as not deprecated (simply because at that version it was not
deprecated).
For example:
$ lvmconfig --type default activation
activation {
...
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated
activation {
...
mirror_region_size=512
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated --withversions
activation {
...
# Available since version 1.0.0.
# Deprecated since version 2.2.99.
mirror_region_size=512
# Available since version 2.2.99.
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated --withcomments
activation {
...
# Configuration option activation/mirror_region_size.
# This has been replaced by the activation/raid_region_size
# setting.
# Size (in KB) of each copy operation when mirroring.
# This configuration option is deprecated.
mirror_region_size=512
# Configuration option activation/raid_region_size.
# Size in KiB of each raid or mirror synchronization region.
# For raid or mirror segment types, this is the amount of
# data that is copied at once when initializing, or moved
# at once by pvmove.
raid_region_size=512
...
}
$ lvmconfig --type default activation --withcomments --atversion 2.2.98
activation {
...
# Configuration option activation/mirror_region_size.
# Size (in KB) of each copy operation when mirroring.
mirror_region_size=512
...
}
A preparatory code for marking configuration nodes as deprecated:
- struct cfg_def_item gains 2 new fields ("deprecated_since_version" and "deprecation_comment"
- cfg* macros to handle new fields
- related config_settings.h edits to add new fields for each item (null for all at the moment)
Patch with implementation will follow...
Before this patch:
$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]
$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad
With this patch applied:
$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]
$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad - [2.2.93]
We're commenting out settings with undefined default values.
The comment character '#' was printed at the very beginning of
the line, it should be placed just at the beginning of the setting,
after the space/tab prefix is printed.
Before this patch:
$ lvmconfig --type default activation
activation {
...
# volume_list=[]
...
}
With this patch applied:
$ lvmconfig --type default activation
activation {
...
# volume_list=[]
...
}
These settings are in the "unsupported" group:
devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
These settings are in the "advanced" group:
devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs
Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).
By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
lvmconfig --type list displays plain list of configuration settings.
Some of the existing decorations can be used (--withsummary and
--withversions) as well as existing options/switches (--ignoreadvanced,
--ignoreunsupported, --ignorelocal, --atversion).
For example (displaying only "config" section so the list is not long):
$lvmconfig --type list config
config/checks
config/abort_on_errors
config/profile_dir
$ lvmconfig --type list --withsummary config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.
$ lvmconfig -l config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.
$ lvmconfig --type list --withsummary --withversions config
config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99]
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99]
config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99]
Example with --atversion (displaying global section):
$ lvmconfig --type list global
global/umask
global/test
global/units
global/si_unit_consistency
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/etc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/prioritise_write_locks
global/library_dir
global/locking_library
global/abort_on_internal_errors
global/detect_internal_vg_cache_corruption
global/metadata_read_only
global/mirror_segtype_default
global/raid10_segtype_default
global/sparse_segtype_default
global/lvdisplay_shows_full_device_path
global/use_lvmetad
global/thin_check_executable
global/thin_dump_executable
global/thin_repair_executable
global/thin_check_options
global/thin_repair_options
global/thin_disabled_features
global/cache_check_executable
global/cache_dump_executable
global/cache_repair_executable
global/cache_check_options
global/cache_repair_options
global/system_id_source
global/system_id_file
$ lvmconfig --type list global --atversion 2.2.50
global/umask
global/test
global/units
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/library_dir
global/locking_library
The settings which have their default value evaluated in runtime should
have their 'unconfigured' counterparts also evaluated in runtime since
those values can be constructed by using other settings.
For example, before this patch:
$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="/etc/lvm/cache/.cache
With this patch applied:
$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@/.cache"
The @something@ used for unconfigured default value is not bound to
CFG_TYPE_STRING settings defined in config_settings.h, it can be
used for any other config type too.
--withfullcomments prints all comment lines for each config option.
--withcomments prints only the first comment line, which should be
a short one-line summary of the option.
Comments from the sample config files are copied into
the comment field of the config settings structure.
This includes only minimal changes to the text.
With this in place, the sample config files can
be generated from 'lvm dumpconfig', and content
for an lvm.conf man page can also be generated.
Refactor the recent metadata-reading optimisation patches.
Remove the recently-added cache fields from struct labeller
and struct format_instance.
Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.
Allow this VG summary information to be looked up by metadata size +
checksum. Adjust the debug log messages to make it clear when this
shortcut has been successful.
(This changes the optimisation slightly, and might be extendable
further.)
Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
When reading VG mda from multiple PVs - do all the validation only
when mda is seen for the first time and when mda checksum and length
is same just return already existing VG pointer.
(i.e. using 300PVs for a VG would lead to create and destroy 300 config trees....)
If configuration setting is marked in config_setting.h with CFG_DISABLED
flag, default value is always used for such setting, no matter if it's defined
by user (in --config/lvm.conf/lvmlocal.conf).
A warning message is displayed if this happens:
For example:
[1] f21/~ # lvm dumpconfig --validate
WARNING: Configuration setting global/system_id_source is disabled. Using default value.
LVM configuration valid.
[1] f21/~ # pvs
WARNING: Configuration setting global/system_id_source is disabled. Using default value.
PV VG Fmt Attr PSize PFree
/dev/sdb lvm2 --- 128.00m 128.00m
...
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it. "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
For example, with dmeventd/executable set to "" which is not allowed for
this setting, the config validation now ends up with:
$ lvm dumpconfig --validate
Configuration setting "dmeventd/executable" invalid. It cannot be set to an empty value.
LVM configuration invalid.
This check for empty values for string config settings was not
done before (we only checked empty arrays, but not scalar strings).
Coverity noticed this function may return untouched buffer,
however in this state can't really happen, but anyway
ensure on error path the buffer will have zero lenght string.
Fix get_pool_params to only read params.
Add poolmetadataspare option to get_pool_params.
Move all profile code into update_pool_params.
Move recalculate code into pool_manip.c
The dumpconfig now understands --commandprofile/--profile/--metadataprofile
The --commandprofile and --profile functionality is almost the same
with only one difference and that is that the --profile is just used
for dumping the content, it's not applied for the command itself
(while the --commandprofile profile is applied like it is done for
any other LVM command).
We also allow --metadataprofile for dumpconfig - dumpconfig *does not*
touch VG/LV and metadata in any way so it's OK to use it here (just for
dumping the content, checking the profile validity etc.).
The validity of the profile can be checked with:
dumpconfig --commandprofile/--profile/--metadataprofile --validate
...depending on the profile type.
Also, mention --config in the dumpconfig help string so users know
that dumpconfig handles this too (it did even before, but it was not
documented in the help string).
- When defining configuration source, the code now uses separate
CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
(before, it was just CONFIG_PROFILE that did not make the
difference between the two). This helps when checking the
configuration if it contains correct set of options which
are all in either command-profilable or metadata-profilable
group without mixing these groups together - so it's a firm
distinction. The "command profile" can't contain
"metadata profile" and vice versa! This is strictly checked
and if the settings are mixed, such profile is rejected and
it's not used. So in the end, the CONFIG_PROFILE_COMMAND
set of options and CONFIG_PROFILE_METADATA are mutually exclusive
sets.
- Marking configuration with one or the other marker will also
determine the way these configuration sources are positioned
in the configuration cascade which is now:
CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES
- Marking configuration with one or the other marker will also make
it possible to issue a command context refresh (will be probably
a part of a future patch) if needed for settings in global profile
set. For settings in metadata profile set this is impossible since
we can't refresh cmd context in the middle of reading VG/LV metadata
and for each VG/LV separately because each VG/LV can have a different
metadata profile assinged and it's not possible to change these
settings at this level.
- When command profile is incorrect, it's rejected *and also* the
command exits immediately - the profile *must* be correct for the
command that was run with a profile to be executed. Before this
patch, when the profile was found incorrect, there was just the
warning message and the command continued without profile applied.
But it's more correct to exit immediately in this case.
- When metadata profile is incorrect, we reject it during command
runtime (as we know the profile name from metadata and not early
from command line as it is in case of command profiles) and we
*do continue* with the command as we're in the middle of operation.
Also, the metadata profile is applied directly and on the fly on
find_config_tree_* fn call and even if the metadata profile is
found incorrect, we still need to return the non-profiled value
as found in the other configuration provided or default value.
To exit immediately even in this case, we'd need to refactor
existing find_config_tree_* fns so they can return error. Currently,
these fns return only config values (which end up with default
values in the end if the config is not found).
- To check the profile validity before use to be sure it's correct,
one can use :
lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate
(the --commandprofile/--metadataprofile for dumpconfig will come
as part of the subsequent patch)
- This patch also adds a reference to --commandprofile and
--metadataprofile in the cmd help string (which was missing before
for the --profile for some commands). We do not mention --profile
now as people should use --commandprofile or --metadataprofile
directly. However, the --profile is still supported for backward
compatibility and it's translated as:
--profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
(as these commands are able to attach profile to metadata)
--profile == --commandprofile for all the other commands
(--metadataprofile is not allowed there as it makes no sense)
- This patch also contains some cleanups to make the code handling
the profiles more readable...
Before, the cft_check_handle used to direct configuration checking
was part of cmd_context. It's better to attach this as part of the
exact config tree against which the check is done. This patch moves
the cft_check_handle out of cmd_context and it attaches it to the
config tree directly as dm_config_tree->custom->config_source->check_handle.
This change makes it easier to track the config tree check results
and provides less space for bugs as the results are directly attached
to the tree and we don't need to be cautious whether the global value
is correct or not (and whether it needs reinitialization) as it was
in the case when the cft_check_handle was part of cmd_context.
Add CONFIG_FILE_SPECIAL config source id to make a difference between
real configuration tree (like lvm.conf and tag configs) and special purpose
configuration tree (like LVM metadata, persistent filter).
This makes it easier to attach correct customized data to the config
tree that is created out of the source then.
We can't use mempool for temporary variable for configuration path inside
find_config_tree_* functions since these functions can use the mempool
themselves deeper in the code and we can free mempool chunks only from
top to bottom which is not the case here (some default string
configuration values can be allocated from the mempool).
The same as for allocation/thin_pool_chunk_size - the default value
used is just a starting point. The calculation continues using the
properties of the devices actually used.
The allocation/thin_pool_chunk_size is a bit more complex. It's default
value is evaluated in runtime based on selected thin_pool_chunk_size_policy.
But the value is just a starting point. The calculation then continues
with dependency on the properties of the devices used. Which means for
such a default value, we know only the starting value.
If the config setting is defined as having no default value, but it's
still not NULL, it means such a value acts as a *hint* only
(e.g. a starting value from which the default value is calculated).
The new "cfg_def_get_default_value_hint" will always return the value
as defined in config_settings.h.
The original "cfg_def_get_default_value" will always return 0/NULL if
the config setting is defined with CFG_DEFAULT_UNDEFINED flag (hence
ignoring the hint).
This is needed for proper distiction between a correct default value
and the value which is just a hint or a starting point in calculation,
but it's not the final value (yes, we do have such settings!).
The devices/cache and devices/cache_dir are evaluated in runtime this way:
- if devices/cache is set, use it
- if devices_cache/dir or devices/cache_file_prefix is set, make up a
path out of that for devices/cache in runtime, taking into account
the LVM_SYSTEM_DIR environment variable if set
- otherwise make up the path out of default which is:
<LVM_SYSTEM_DIR>/<cache_dir>/<cache_file_prefix>.cache
With the runtime defaults, we can encode this easily now. Also, the lvm
dumpconfig can show proper and exact information about this setting then
(the variant that shows default values).
Previously, we declared a default value as undefined ("NULL") for
settings which require runtime context to be set first (e.g. settings
for paths that rely on SYSTEM_DIR environment variable or they depend
on any other setting in some way).
If we want to output default values as they are really used in runtime,
we should make it possible to define a default value as function which
is evaluated, not just providing a firm constant value as it was before.
This patch defines simple prototypes for such functions. Also, there's
new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide
exactly the same functionality as the original "cfg" and "cfg_array"
macros when defining the configuration settings in config_settings.h,
but they don't set the constant default value. Instead, they automatically
link the configuration setting definition with one of these functions:
typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile);
typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile);
typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile);
(The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and
set the default value link to the function accordingly).
Then such configuration setting requires a function of selected type to
be defined. This function has a predefined name:
get_default_<id>
...where the <id> is the id of the setting as defined in
config_settings.h. For example "backup_archive_dir_CFG" if defined
as a setting with default value evaluated in runtime with "cfg_runtime"
will automatically have "get_default_backup_archive_dir_CFG" function
linked to this setting to get the default value.
Using mempool is much safer than using the global static variable.
The global variable would be rewritten on each find_config_tree_* call
and we need to be very careful not to get into this problem (we don't
do now, but we can with the patches for "runtime defaults" that will follow).
To make "lvm dumpconfig --type default" output to be usable like any
other config, we need to comment out lines that have no default value
defined. Otherwise, we'd have the output with config options
with blank or zero values which is not the same as when the value
is not defined! And such configuration can't be feed into lvm again
without further edits. So let's fix this.
Currently this covers these configuration options exactly:
devices/loopfiles
devices/preferred_names
devices/filter
devices/global_filter
devices/types
allocation/cling_tag_list
global/format_libraries
global/segment_libraries
activation/volume_list
activation/auto_activation_volume_list
activation/read_only_volume_list
activation/mlock_filter
metadata/dirs
metadata/disk_areas
metadata/disk_areas/<disk_area>
metadata/disk_areas/<disk_area>/start_sector
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
tags/<tag>
tags/<tag>/host_list
gcc -O2 v4.8 on 32 bit architecture is causing a bug in parameter
passing. It does not happen with -01 nor -O0.
The problematic part of the code was strlen use in config.c in
the config_def_check fn and the call for _config_def_check_tree in it:
<snip>
rplen = strlen(rp);
if (!_config_def_check_tree(handle, vp, vp + strlen(vp), rp, rp + rplen, CFG_PATH_MAX_LEN - rplen, cn, cmd->cft_def_hash)) ...
</snip>
If compiled with -O0 (correct):
Breakpoint 1, config_def_check (cmd=0x819b050, handle=0x81a04f8) at config/config.c:775
(gdb) p vp
$1 = 0x8189ee0 <_cfg_path> "config"
(gdb) p strlen(vp)
$2 = 6
(gdb)
_config_def_check_tree (handle=0x81a04f8, vp=0x8189ee0 <_cfg_path>
"config", pvp=0x8189ee6 <_cfg_path+6> "", rp=0xbfffe1e8 "config",
prp=0xbfffe1ee "", buf_size=58, root=0x81a2568, ht=0x81a65
48) at config/config.c:680
(gdb) p vp
$4 = 0x8189ee0 <_cfg_path> "config"
(gdb) p pvp
$5 = 0x8189ee6 <_cfg_path+6> ""
If compiled with -O2 (incorrect):
Breakpoint 1, config_def_check (cmd=cmd@entry=0x8183050, handle=0x81884f8) at config/config.c:775
(gdb) p vp
$1 = 0x8172fc0 <_cfg_path> "config"
(gdb) p strlen(vp)
$2 = 6
(gdb) p vp + strlen(vp)
$3 = 0x8172fc6 <_cfg_path+6> ""
(gdb)
_config_def_check_tree (handle=handle@entry=0x81884f8, pvp=0x8172fc7
<_cfg_path+7> "host_list", rp=rp@entry=0xbffff190 "config",
prp=prp@entry=0xbffff196 "", buf_size=buf_size@entry=58, ht=0x
818e548, root=0x818a568, vp=0x8172fc0 <_cfg_path> "config") at
config/config.c:674
(gdb) p pvp
$4 = 0x8172fc7 <_cfg_path+7> "host_list"
The difference is in passing the "pvp" arg for _config_def_check_tree.
While in the correct case, the value of _cfg_path+6 is passed
(the result of vp + strlen(vp) - see the snippet of the code above),
in the incorrect case, this value is increased by 1 to _cfg_path+7,
hence totally malforming the string that is being processed.
This ends up with incorrect validation check and incorrect warning
messages are issued like:
"Configuration setting "config/checks" has invalid type. Found integer, expected section."
To workaround this issue, remove the "static" qualifier from the
"static char _cfg_path[CFG_PATH_MAX_LEN]". This causes the optimalizer
to be less aggressive (also shuffling the arg list for
_config_def_check_tree call helps).
cfg_def_get_path uses a global static var to store the result (for efficiency).
So we need to apply the profile first and then get the path for the config item
when calling find_config_tree_* fns.
Also activation/auto_set_activation is not profilable (at least not now,
maybe later if we need that).
...when creating config trees while calling config_def_create_tree fn
that constructs a tree out of config_settings.h definition
(CFG_DEF_TREE_NEW/MISSING/DEFAULT/PROFILABLE).
Till now, we needed the config tree merge only for merging
tag configs with lvm.conf. However, this type of merging
did a few extra exceptions:
- leaving out the tags section
- merging values in activation/volume_list
- merging values in devices/filter
- merging values in devices/types
Any other config values were replaced by new values.
However, we'd like to do a 'raw merge' as well, simply
bypassing the exceptions listed above. This will help
us to create a single tree representing the cascaded
configs like CONFIG_STRING -> CONFIG_PROFILE -> ...
The reason for this patch is that when trees are cascaded,
the first value found while traversing the cascade is used,
not making any exceptions like we do for tag configs.
When CFG_DEF_TREE_MISSING is created, it needs to know the status
of the check done on the tree used (the CFG_USED flag).
This bug was introduced with f1c292cc38
"make it possible to run several instances of configuration check at
once". This patch separated the CFG_USED and CFG_VALID flags in
a separate 'status' field in struct cft_check_handle.
However, when creating some trees, like CFG_DEF_TREE_MISSING,
we need this status to do a comparison with full config definition
to determine which items are missing and for which default values
were used. Otherwise, all items would be considered missing.
So, pass this status in a new field called 'check_status' in
struct config_def_tree_spec that defines how the (dumpconfig) tree
should be constructed (and this struct is passed to
config_def_create_tree fn then).
Besides the classical configuration checks (type checking and
checking whether the item is recognized by lvm tools) for profiles,
do an extra check whether the configuration setting is customizable
by a profile at all. Give a warning message if not.
Before, the status of the configuration check (config_def_check fn call)
was saved directly in global configuration definitinion array (as part
of the cfg_def_item_t/flags)
This patch introduces the "struct cft_check_handle" that defines
configuration check parameters as well as separate place to store
the status (status here means CFG_USED and CFG_VALID flags, formerly
saved in cfg_def_item_t/flags). This struct can hold config check
parameters as well as the status for each config tree separately,
thus making it possible to run several instances of config_def_check
without interference.
