IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When we need to clear dirty cache content of cached LV, there
is table reload which usually is shortly followed by next metadata
change. However udev can't (as of now) process udev event
while device is 'suspended'.
So whenever sequence of 'suspend/resume/suspend' is needed,
we need to wait first for finishing of 'resume' processing before
starting next 'suspend'. Otherwise there is 'race' danger of triggering
unwantend umount by systemd as such event will trigger
SYSTEMD_READY=0 state for a moment for such changed device.
Such race is pretty ugly to trace so we may need to review more
sequencies for missing 'sync'.
(Other option is to enhnace 'udev' rules processing to avoid
such dramatic actions to be happening for suspended devices).
Add to commits 87117c2b25 and 0b8bf73a63 to avoid refreshing two
times altogether, thus avoiding issues related to clustered, remotely
activated RaidLV. Avoid need to repeat "lvchange --refresh RaidLV"
two times as a workaround to refresh a RaidLV. Fix handles removal
of temporary *-missing-* devices created for any missing segments
in RAID SubLVs during activation.
Because the kernel dm-raid target isn't able to handle transiently
failing devices properly we need
"[dm-devel][PATCH] dm raid: fix transient device failure processing"
as well.
test: add lvchange-raid-transient-failures.sh
and enhance lvconvert-raid.sh
Resolves: rhbz1025322
Related: rhbz1265191
Related: rhbz1399844
Related: rhbz1404425
Move individual segment validation to a separate function
executed for 'complete_vg'.
Move some 'extra' validation bits from 'raid' validation to global
segtype validation (so extending existing normal validation)
TODO: still some test are left to be moved.
Reduce some duplication in validation process - there are still
some left thought so still room for improving overal speed.
It could be actually better to use even cache origin in
read-only mode so there could no be some 'acidental'
change being done on this volume.
This however need further tools enhancment - where we would need
to handle whole subtree on 'lvchange -pr/-prw'.
When command calls backup() more then once (which is actually not
wanted) this warning message is shown repeatedly:
"WARNING: This metadata update is NOT backed up."
Instead now print message just once and less confuse user.
Add this functionality to lvconvert:
'lvconvert --thin cachedLV --thinpool vg/poll'
Converts cachedLV to external origin (which will be read-only).
New thin volume is created in thinpool LV and it's using external
origin as source for unprovisioned chunks.
This conversion happens online (while volume is in use).
Thin LV remains fully writable.
Cached external origin no longer could be written so cache will be used
ONLY for read operations. For this limitation we require cache mode
to be writethrough (as writeback cannot write to read-only volumes).
When thinLV is later removed cached external origin is again
fully usable, just note, LV remain in 'read-only' mode.
When read-write is needed, 'lvchange -prw' has to be used.
Single external origin could be user by multiple thinLV in
multiple differen thin pool.
When cache volume may be converted from normal to -real layer LV
we need to improve logic for call cache_check.
With this patch, we register call for cache_check only when metadata LV
is not yet present in active table slot (should match initial table
load).
This avoids unwanted checking when cache would become layer device
online.
External origin could be reloaded via more locks.
It's actually even more complex then thin-pool,
as it may be active on more nodes for linear LVs
(and maybe even more types).
External origin is always read-only thus unmodifiable
device so there should not be a problem accesing it
through multiple nodes.
Also for thin-pool check first presence of active thin-pool.
FIXME:
It's not easy to detect on which nodes this device is active
Thus manipulation with such device may require checking every
node and it active state and refresh.
But since such setup is quite complex to prepare and use,
hopefully there are not user trying to 'explore' this usage yet.
To be ready to show status of cache volume, call the status
with layer. Layer is automatically detected in this case when
cache volume is used in 'layered' form (needs -real suffix).
Avoid printing misleading message about single dirty block.
Instead properly detect condition where the 'cleaner' policy
needs to be installed without 'overloading' dirty variable.
Also print warning if we would be clearing read-only volume.
(it really shouldn't happen).
External origin could be activated as stand-alone device.
When the last thin LV is removed, external origin is no longer
the external origin and it's layer property was dropped.
Ensure dm table is correct by reloading external origin
(when it's active).
When LV is external origin, show info for LV but
status for -layer. So we expose more info to a user
as otherwise active external origin is only linear
mapping of -real layer.
We do the same for i.e. old snaphost origin.
Activation of raid has brough up also splitted image with tracing
(without taking lock for this).
So when raid is now activate - such image is not put into
table (with _rmeta). When user needs such device, just active it.
Commit 0690392040 revealed a problem
in raid metadata manipulation.
We do two operations in one table reload:
- raid leg/image extraction
- rename remaining raid legs
This should be made in separate steps. Otherwise we do an
uncorrectable table change on error path (leaving tables
for admin and dmsetup).
As a hotfix - restore the previous logic and use a single
new function _lv_update_and_reload_list which activates exclusively
extracted LVs on the list before resuming suspended raid LV.
This restore 'rename' functionality upon resume.
Also still preserve the 'origin_only' logic - although we know
it's not working properly for cluster and LV stacking.
Further fixes are needed.
backup is not 'tested' for success and also it should
actually happen just when command is finished.
We do not target to make backups with each inter-step
metadata change.
RAID is LV property
TODO: only 2 flags are seg->status: PVMOVE & MERGING
At least the second one should be soon elimanted as again
we merge LV not a segment.
This is another place for 'common' use pattern or
reload and activation of deleted devices.
(Moving the exclusive activation to _deactivate_and_remove_lvs()).
TODO: looks like halve of raid function is reloading
just 'origin' - and the other full LV.
Add a macro for the clz (count leading zeros) operation.
Use the GCC __builtin_clz() for clz() if it is available and fall
back to a shift based implementation on systems that do not set
HAVE___BUILTIN_CLZ.
Fix order of operation when converting raid1 into old mirror.
Before any later metadata modification are initiated prepare
mirror_log device with all clearing.
Then directly convert raid1 into mirror with mirror_log.
This convertion now properly see as precommitted metadata
new 'mirror' and committed old 'raid' and is able to
preload all LVs.
Simplify info run for use only for INFO & STATUS.
Drop handling MKNODES within _info_run() call
and use more advanced _setup_task_run() directly.
This allows to further simplify _info_run().
Integrate also query for inactive table and
handle dm_task_run() and dm_task_get_info()
(thus switching to setup_task_run)
Add one exception case for DM_DEVICE_TARGET_MSG.
This allows further shortening and simplification of all
other users of this function.
It's actually not needed to call extra lv_has_target_type() to detect
snapshot merge is in progress - decode this right during status
capturing and save even few extra ioctl calls.
Drop LV from passed API arg - it's always segment being checked.
Also use_layer is now in full control of lv_info_with_seg_status().
It decides which device needs to be checked to get 'the most info'.
TODO: future version should be able to expose status from
Start moving selection of status taken for a LV into a single place.
The logic for showing info & status has been spread over multiple
places and were doing too complex decision going agains each other.
Unify selection of status of origin & cow scanned device.
TODO: in future we want to grab status for LV and layered LV and have
both statuses present for display - i.e. when 'old snapshot'
of thinLV is takes and there is ongoing merge - at some moment
we are not capable to show all needed info.
When lvm2 wants to see a status, it needs to validate,
segment for status reading is matching whan lvm2 expects in
metadata.
Also ensure status failure will not cause '0' from info reading
when actual info was collected properly.
Failure in 'status' reading is considered to be
a 'log_warn()' event only.
When we can't parse status, switch to warning as this is not
considered an errornous case. LVS is not supposed to return
error status code when device is not what it's been expected to
be - but it should be WARNING a user there is something unexpected.
Convert lvs -o lv_merge_failed,lv_snapshot_invalid to use
lv_info_and_status function.
This makes it equal to attr value showing this info
(as they were different since they were derived from
different data set and different logic as well).
Also saves couple extra ioctl that were needed to obtain this info.
When displaying <reporting_command> -o help, we'd like to have fields
grouped nicely, not starting having groups interleaved as it was before.
The code that displays the help output for fields takes the order as
written in columns.h file - this caused output like:
$ lvs -o help
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Info and Status Combined Fields
-----------------------------------------------------
...field list...
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Status Fields
-----------------------------------
...field list...
Logical Volume Fields
---------------------
...field list...
Instead, let's have it without groups interleaved which may be
a bit confusing, so:
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Status Fields
-----------------------------------
...field list...
Logical Volume Device Info and Status Combined Fields
-----------------------------------------------------
...field list...
..and so on.
In case any SubLV of a RaidLV transiently fails, it needs
two "lvchange --refresh RaidLV" runs to get it to fully
operational mode again. Reason being, that lvm reloads all
targets for the RaidLV tree but doesn't resume the SubLVs
until after the whole tree has been reloaded in the first
refresh run. Thus the live mapping table of the SubLVs
still point to an "error" mapping and the dm-raid target
can't retrieve any superblock from the MetaLV(s) in processing
the constructor during this preload thus not discovering the
again accessible SubLVs. In the second run, the SubLV targets
map proper (meta)data, hence the constructor discovers those
fine now.
Solve by resuming the SubLVs of the RaidLV before
preloading the respective top-level RaidLV target.
Resolves: rhbz1399844
Avoid code duplication and use exiting commonly used
lv_update_and_reload() function.
There is still one place left where mirror is doing strange
double suspend call - needs there more thinking what's wrong with
that code.
When lvconvert adds a new leg - it's doing it free 'temporary' image
layer - however this temporary 'internal' mirror is also MIRRORED LV.
But the status bit was not properly transfered through layer.
Do not emit warning message but only log debug message if
lvm2-lvmdbusd.service unit is missing and at the same time
we have global/notify_dbus=1 (which is used by default if we
configured sources with "--enable-notify-dbus"). We don't want
hard dependency between LVM2 and lvmdbusd so it's enough to log
only debug message in this case.
Make it easier to replace missing segments with 'zero' returning
target - otherwise user would have to create some extra target
to provide zeros as /dev/zero can't be used (not a block device).
Also break code loop when segment is found and make it an INTERNAL_ERROR
where it's missing.
Instead of clearing multiple rmeta device with sequential activation
process and waiting for udev for every _rmeta device separately,
activate all _rmeta devices first and then clear them and deactivate
afterwards.
Also update some tracing messages.
When anyhing goes wrong during clearing process, always try to
deactivate as much _rmeta devices as possible before fail.
Translate log_info() into log_very_verbose() which is macro
supposed to be used by our code.
log_info() is internal macro with eventually some 'symbolic' meaning
in syslogging daemons.
Introduce macros:
log_level(), log_stderr(), log_once(), log_bypass_report()
For easier and more consisten way how to 'decoder' bits
of info from passed 'level'.
This patch fixes potential problem when 'level' of message
might not have always masked right bits.
(Automatic) repair may not be allowed during the initial sync of an upconverted
linear LV, because the data on the failing, primary leg hasn't been completely
synchronized to the N-1 other legs of the raid1 LV (replacing failed legs during
repair involves discontinuing access to any replaced legs data, thus preventing
data recovery on the primary leg e.g. via dd_rescue).
Even though repair would not cause data loss when adding legs to a fully synced
raid1 LV, we don't have information yet defining this state yet (e.g. a raid1
LV flag telling the fully synchronized status before any legs were added),
hence can't automatically decide to allow to repair.
If nonetheless a repair on a non-synced raid1 LVs is intended, the "--force"
option has to be provided.
Resolves: rhbz1311765
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.
Add related tests to lvconvert-raid-takeover.sh
Resolves: rhbz1388962
On conversions between striped/raid0* and raid4, the kernel expects
the dedicated raid4 parity SubLVs in the first segment area rather than
in the last it's been allocated to, thus the data mapping ain't proper.
Enhance lvconvert (lib/metadata/raid_manip.c) to shift the dedicated
parity SubLVs on conversions from striped/raid0* to raid4 and vice-versa.
In case of raid0_meta -> raid4 where the MD raid0 personality already has
stored RAID array device positions in the superblocks, the MetaLVs have to
be cleared so that the kernel doesn't fail validating the array positions
after lvm has shifted them up by one.
Add more tests to lvconvert-raid-takeover.sh including one to check for
mapping flaws by converting a created raid4 with filesystem -> striped
and fsck it.
Whilst on it:
- add missing direct striped -> raid4 conversion to the takeover array
to avoid an intermim conversion from striped -> raid0*
- clean up the takeover array
- allow lvconvert to actually call lv_raid_convert() on all takeover requests
in order to check parameters and display messages provided by takeover
functions rather than just "...not supported" from within lvconvert
- fix a typo
Resolves: rhbz1386148
Works if the pool is inactive.
Activation code doesn't notice a new raid dependency in on-disk metadata
when a thin LV is already active.
https://bugzilla.redhat.com/1365286
We added lightweight toolcontext handle to avoid useless initialization
of some parts of the context and also to avoid problems when using the
handle very soon at system boot, like in lvm2-activation-generator
through lvm2app interface. However, we missed reading all the other
config sources like lvmlocal.conf as well as any tag config - we need to
read these too to get the final config value which may be overriden in
any of these additional config sources.
Currently, we use this lightweight toolcontext handle to read
global/use_lvmetad and global/use_lvmpolld config values in
lvm2-activation-generator using lvm2app interface (lvm_config_find_bool
lvm2app function).
