IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
An incorrect fix on July 13, 2010 for an annoyance has caused a regression.
The offending check-in was part of the 2.02.71 release of LVM. That
check-in caused any PVs specified on the command line to be ignored when
performing a mirror split.
This patch reverses the aforementioned check-in (solving the regressions)
and posits a new solution to the list reversal problem. The original
problem was that we would always take the lowest mimage LVs from a mirror
when performing a split, but what we really want is to take the highest
mimage LVs. This patch accomplishes that by working through the list in
reverse order - choosing the higher numbered mimages first. (This also
reduces the amount of processing necessary.)
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Takahiro Yasui <takahiro.yasui@hds.com>
corruption bug in cmirror. 'dm_bit' is only ever used as a boolean operation
within LVM, but it can return a range of values. If the bit is set, a power of
2 is returned. If the bit is unset, 0 is returned.
'log_test_bit' (a function in the cluster mirror log daemon code) has switched
to using the dm bit operations in rhel6. There are two places in the daemon
code where 'log_test_bit' is not used merely as a boolean, but rather the
return value is used as the return value for the log functions 'is_clean' and
'in_sync' - having assumed that 'dm_bit' was returning 0 or 1 only.
One place the 'in_sync' function is utilized is in 'dm_rh_get_state' - a
function that informs the mirroring code how to treat I/O and which devices to
read/write from. 'dm_rh_get_state' was checking if the return value of
'in_sync' was 1 to determine if the region was DM_RH_CLEAN. Since 'dm_bit'
(and by extension 'log_test_bit' and 'in_sync') was returning powers of 2,
DM_RH_CLEAN was rarely being reported as it should have been. Thinking the
region was out-of-sync, the mirroring code would write only to the primary
device. When the primary device was failed, all of those writes were lost -
leaving the entire mirror corrupted.
all but one mirror leg.
<patch header>
To handle a double failure of a mirrored log, Jon's two patches are
commited, however, lvconvert command can't still handle an error
when mirror leg and mirrored log got failure at the same time.
[Patch]: Handle both devices of a mirrored log failing (bug 607347)
posted: https://www.redhat.com/archives/lvm-devel/2010-July/msg00009.html
commit: https://www.redhat.com/archives/lvm-devel/2010-July/msg00027.html
[Patch]: Handle both devices of a mirrored log failing (bug 607347) -
additional fix
posted: https://www.redhat.com/archives/lvm-devel/2010-July/msg00093.html
commit: https://www.redhat.com/archives/lvm-devel/2010-July/msg00101.html
In the second patch, the target type of mirrored log is replaced with
error target when remove_log is set to 1, but this procedure should be
also used in other cases such as the number of mirror leg is 1. This
patch relocates the procedure to the main path.
In addition, I added following three changes.
- Removed tmp_orphan_lvs handling procedure
It seems that _delete_lv() can handle detached_log_lv properly
without adding mirror legs in mirrored log to tmp_orphan_lvs.
Therefore, I removed the procedure.
- Removed vg_write()/vg_commit()
Metadata is saved by vg_write()/vg_commit() just after detached_log_lv
is handled. Therefore, I removed vg_write()/vg_commit().
- With Jon's second patch, we think that we don't have to call
remove_mirror_log() in _lv_update_mirrored_log() because will be
handled remove_mirror_images() in _lvconvert_mirrors_repaire().
</patch header>
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
The cluster log daemon (cmirrord) is not multi-threaded and
can handle only one request at a time. When a log is stacked
on top of a mirror (which itself contains a 'core' log), it
creates a situation that cannot be solved without threading.
When the top level mirror issues a "resume", the log daemon
attempts to read from the log device to retrieve the log
state. However, the log is a mirror which, before issuing
the read, attempts to determine the 'sync' status of the
region of the mirror which is to be read. This sync status
request cannot be completed by the daemon because it is
blocked on a read I/O to the very mirror requesting the
sync status.
With mirror_log_fault_policy of 'remove' and mirror_image_fault_policy
of 'allocate', the log type of the mirror volume is converted from
'disk' or 'mirrored' to 'core' when all mirror legs but one in a mirror
volume broke.
Keep new_log_count as a number of valid log devices by using log_count
variable for a temporary usage in the first phase of error recovery
in _lvconvert_mirrors_repair().
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
mirrors, we must also check that the log daemon (cmirrord) is running.
The log module can be auto-loaded, but the daemon cannot be
"auto-started". Failing to check for the daemon produces cryptic
messages that customers have a hard time deciphering. (The system
messages do report that the log daemon is not running, but people
don't seem to find this message easily.)
Here are examples of what is printed when the module is available,
but the log daemon has not been started.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg
Shared cluster mirrors are not available.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg -v
Setting logging type to disk
Finding volume group "vg"
Archiving volume group "vg" metadata (seqno 3).
Creating logical volume lv
Executing: /sbin/modprobe dm-log-userspace
Cluster mirror log daemon is not running
Shared cluster mirrors are not available.
Creating volume group backup "/etc/lvm/backup/vg" (seqno 4).
The main problem with these bugs was that the newly split
off LV was not being suspended properly. This meant that
the memlock count was not being balanced, the DM devices
were not being renamed, and some DM devices which should
have been removed were not.
I've also renamed some of the variables and added comments
to make things clearer as to what is going on. (I can break
this patch in two if it means easier review.)
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
This should bring less confusion when there are some settings left and
people just forgot about it and then they run into problems. These messages
should give them a hint of what's really going on.
A previous check-in added logic to handle the case where both images
of a mirrored log failed. It solved the problem by simply removing
the log entirely - leaving the parent mirror with a 'core' log. This
worked for most cases. However, if there was a small delay between
the failures of the two mirrored log devices, the mirror would hang,
LVM would hang, and no additional LVM commands could be issued.
When the first leg of the log fails, it signals the need for repair.
Before 'lvconvert --repair' is run by dmeventd, the second leg fails.
'lvconvert' would see both devices as failed and try to remove the
log entirely. When it came time to suspend the parent mirror to
update the configuration, the suspend would hang because it couldn't
get any I/O through the mirrored log, which was plugged waiting for
corrective action. The solution is to replace the log with an error
target to clear any pending writes before removing it. This allows
the parent mirror to suspend and make the proper changes.
When using vgmetadatacopies value other than "umanaged" (0), prompt
the user if the usage of --metadataignore would change the value of
vgmetadatacopies. The main 2 cases are:
1) pvchange --metadataignore
2) vgextend --metadataignore
We leave the prompt check in the tools, and do not change anything
if the user says 'n'.
Examples:
vgextend --metadataignore y vgtest /dev/loop0
Setting metadataignore will override preferred number of copies of VG vgtest metadata.
Are you sure? [y/n]: y
No physical volume label read from /dev/loop0
Physical volume "/dev/loop0" successfully created
Volume group "vgtest" successfully extended
pvchange --metadataignore y /dev/loop3
Setting metadataignore on /dev/loop3 will override preferred number of copies of VG vgtest metadata.
Are you sure? [y/n]: y
WARNING: Changing preferred number of copies of VG vgtest metadata from 3 to 2
Physical volume "/dev/loop3" changed
1 physical volume changed / 0 physical volumes not changed
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
- If a PV contained empty mdas, the auto-recovery code was not kicking in.
- The 'inconsistent' state was getting lost when metadata was cached so
recovery didn't kick in. But leave the behaviour alone when using
precommitted metadata because of a warning in a confusing FIXME.
In my testing, pvs and vgs didn't repair inconsistent metadata like they
used to do. (How many other tools fail similarly now?)
And there should be no need to cache inconsistent metadata because it is
supposed to get repaired under the protection of a write lock immediately it is
discovered.
This code is in need of a redesign based on first principles.
I still see bugs in this code and this commit is risky.
Rather than attempting to remove all the images of a mirrored
log volume via remove_mirror_images, simply remove the log
if all its devices have failed.
Taka was the first to report that there is still an outstanding
issue with handling this case. I've managed to reproduce it
only very rarely, and am still working on identifying the problem.
Failing to handle the problem rarely is better than not handling
the scenario at all, so I'm checking this in.
