IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Recent kernel (4.4) start to report values smaller then sector size
(but in reporting size for SSD which support data zeroing on discard).
For now log warning and assume it really means 1 sector.
Addressing RHBZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1313377
There's a window between doing VG read and checking PV device size
against real device size. If the device is removed in this window,
the dev cache still holds struct device and pv->dev still references
that and that PV is not marked as missing. However, if we're trying
to get size for such device, the open fails because that device
doesn't exists anymore.
We called existing pv_dev_size in _check_pv_dev_sizes fn. But
pv_dev_size assigned a size of 0 if the dev_get_size it called failed
(because the device is gone).
So call the dev_get_size directly and check for the return code
in _check_pv_dev_sizes and go further only if we really know the
device size. This is to avoid confusing warning messages like:
Device /dev/sdd1 has size of 0 sectors which is smaller than corresponding PV size of 31455207 sectors. Was device resized?
One or more devices used as PVs in VG helter_skelter have changed sizes.
Specifying an output width of 0 now leads to a default minimum width
taken from the width of the column heading. (Most fields should use
this.)
Components of field names are generally separated by underscores (which
are optional at run-time). (Dropped 3 duplicate fields now covered by
this rule.)
Each field heading must be unique and generally doesn't have spaces
between words (which get capitalised) unless they are already short and
the fields are normally longer or clarity demands it.
This command option can be used to trigger a D-Bus
notification independent of the usual notifications
that are sent from other commands as an effect of
changes to PV/VG/LV state. If lvm is not built with
dbus notification support or if notify_dbus is disabled
in the config, this command will exit with an error.
When a command modifies a PV or VG, or changes the
activation state of an LV, it will send a dbus
notification when the command is finished. This
can be enabled/disabled with a config setting.
The code in _print_historical_lv function works with temporary
"descendants_buffer" that is allocated and freed within this
function.
When printing text out, we used "outf" macro which called
"out_text" fn and it checked return value and if failed,
the macro called "return_0" automatically. But since we
use the temporary buffer, if any of the out_text calls
fails, we need to deallocate this buffer properly - that's
the "goto_out", otherwise we'll be leaking memory.
So add new "outfgo" helper macro which does the same as "outf",
but it calls "goto_out" instead of "return_0" so we can jump
to a cleanup hook at the end.
Historical LV is valid as long as there is at least one live LV among
its ancestors. If we find any invalid (dangling) historical LVs, remove
them automatically.
The vg_strip_outdated_historical_lvs iterates over the list of historical LVs
we have and it shoots down the ones which are outdated.
Configuration hook to set the timeout will be in subsequent patch.
The metadata/record_lvs_history is global switch which enables or
disables recording historical LVs in metadata.
If both metadata/record_lvs_history=1 lvm.conf option and
--nohistory command switch is used at the same time, the
--nohistory prevails.
Report proper values for historical LVs in lv_layout and lv_role fields.
Any historical LV doesn't have any layout anymore and the role is "history".
For example:
$ lvs -H -o name,lv_attr,lv_layout,lv_role vg/-lvol1
LV Attr Layout Role
-lvol1 ----h----- none public,history
The lv_full_ancestors reporting field is just like the existing
lv_ancestors field but it also takes into account any history and
indirect relations recorded.
All names for historical LVs are prefixed with '-' character to make clear
difference between live and historical LVs. The '-' can't be set by users
for live LV names during lvcreate hence we never get into a conflict with
the names that user defines for live LVs.
The lv_historical reporting field is a simple binary field that reports
whether an LV is historical one ("historical" value or value of "1" displayed)
or not (blank string "" or value of "0" displayed).
This patch adds "include_historical_lvs" field to struct cmd_context to
make it possible for the command to switch between original funcionality
where no historical LVs are processed and functionality where historical
LVs are taken into account (and reported or processed further). The switch
between these modes is done using the '-H|--history' switch on command
line.
The include_historical_lvs state is then passed to process_each_* fns
using the "include_historical_lvs" field within struct processing_handle.
Add support for making an interconnection between thin LV segment and
its indirect origin (which may be historical or live LV) - add a new
"indirect_origin" argument to attach_pool_lv function.
Also export historical LVs when exporting LVM2 metadata.
This is list of all historical LVs listed in
"historical_logical_volumes" metadata section with all
the properties exported for each historical LV.
For example, we have this thin snapshot sequence:
lvol1 --> lvol2 --> lvol3
\
--> lvol4
We end up with these metadata:
logical_volume {
...
(lvol1, lvol3 and lvol4 listed here as usual - no change here)
...
}
historical_logical_volumes {
lvol2 {
id = "S0Dw1U-v5sF-LwAb-W9SI-pNOF-Madd-5dxSv5"
creation_time = 1456919613 # 2016-03-02 12:53:33 +0100
removal_time = 1456919620 # 2016-03-02 12:53:40 +0100
origin = "lvol1"
descendants = ["lvol3", "lvol4"]
}
}
By removing lvol1 further, we end up with:
historical_logical_volumes {
lvol2 {
id = "S0Dw1U-v5sF-LwAb-W9SI-pNOF-Madd-5dxSv5"
creation_time = 1456919613 # 2016-03-02 12:53:33 +0100
removal_time = 1456919620 # 2016-03-02 12:53:40 +0100
origin = "-lvol1"
descendants = ["lvol3", "lvol4"]
}
lvol1 {
id = "me0mes-aYnK-nRfT-vNlV-UiR1-GP7r-ojbROr"
creation_time = 1456919608 # 2016-03-02 12:53:28 +0100
removal_time = 1456919767 # 2016-03-02 12:56:07 +0100
}
}
When an LV is being removed, we create an instance of
"struct historical_logical_volume" wrapped up in
"struct generic_logical_volume".
All instances of "struct historical_logical_volume" are then recorded in
"historical_lvs" list which is part of "struct volume_group".
The "historical LV" is then interconnected with "live LVs" to
connect a history chain for the live LV.
The add_glv_to_indirect_glvs is a helper function that registers a
volume represented by struct generic_logical_volume instance ("glv")
as an indirect user of another volume ("origin_glv") and vice versa -
it also registers the other volume ("origin_glv") as indirect_origin
of user volume ("glv").
The remove_glv_from_indirect_glvs does the opposite.
The get_or_create_glv is helper function that retrieves any existing
generic_logical_volume wrapper for the LV. If the wrapper does not exist
yet, it's created.
The get_org_create_glvl is the same as get_or_create_glv but it creates
the glv_list wrapper in addition so it can be added to a list.
Add new structures and new fields in existing structures to support
tracking history of LVs (the LVs which don't exist - the have been
removed already):
- new "struct historical_logical_volume"
This structure keeps information specific to historical LVs
(historical LV is very reduced form of struct logical_volume +
it contains a few specific fields to track historical LV
properties like removal time and connections among other LVs).
- new "struct generic_logical_volume"
Wrapper for "struct historical_logical_volume" and
"struct logical_volume" to make it possible to handle volumes
in uniform way, no matter if it's live or historical one.
- new "struct glv_list"
Wrapper for "struct generic_logical_volume" so it can be
added to a list.
- new "indirect_glvs" field in "struct logical_volume"
List that stores references to all indirect users of this LV - this
interconnects live LV with historical descendant LVs or even live
descendant LVs.
- new "indirect_origin" field in "struct lv_segment"
Reference to indirect origin of this segment - this interconnects
live LV (segment) with historical ancestor.
- new "this_glv" field in "struct logical_volume"
This references an existing generic_logical_volume wrapper for this
LV, if used. It can be NULL if not needed - which means we're not
handling historical LVs at all.
- new "historical_lvs" field in "struct volume group
List of all historical LVs read from VG metadata.
Pair kernel_cache_settings with kernel_cache_policy.
There is very small chance in error case that the value in table
might be differnet from the value stored in metadata
so make it 'checkable'.
Showing 'u' in the pv_attr reporting field is mostly unnecessary because
most PVs are allocatable, and being allocatable implies it is (u)sed,
and this is already obvious from other fields in the default 'pvs'
output like the VG name.
So move the new (u)sed pv_attr from character position 4 to 1, and only
show it in those rare cases when the PV is not (a)llocatable or the
relevant metadata is missing.
(Scripts should not be using pv_attr, but rather pv_allocatable,
pv_exported, pv_missing, pv_in_use etc.)
Make the data_alignment variable 64 bits so it
can hold the invalid command line arg used in
pvreate-usage.sh pvcreate --dataalignment 1e.
On 32 bit arches, the smaller variable wouldn't
hold the invalid value so the error would not
trigger as expected by the test.
"pvcreate_each_params" was a temporary name used
to transition from the old "pvcreate_params".
Remove the old pvcreate_params struct and rename the
new pvcreate_each_params struct to pvcreate_params.
Rename various pvcreate_each_params terms to simply
pvcreate_params.
Use the new pvcreate_each_device() function from
toollib, previously added for pvcreate, in place
of the old pvcreate_vol().
This also requires shifting the location where the
lock is acquired for the new VG name. The lock for
the new VG is supposed to be acquired before pvcreate.
This means splitting the vg_lock_newname() out of
vg_create(), and calling vg_lock_newname() directly
before pvcreate, and then calling the remainder of
vg_create() after pvcreate.
The new function vg_lock_and_create() now does
vg_lock_newname() + vg_create(), like the previous
version of vg_create().
The lock on the new VG name is released before the
pvcreate and reacquired after the pvcreate because
pvcreate needs to reset lvmcache, which doesn't work
when locks are held. An exception could likely be
made for the new VG name lock, which would allow
vgcreate to hold the new VG name lock across the
pvcreate step.
This is common code for handling PV create/remove
that can be shared by pvcreate/vgcreate/vgextend/pvremove.
This does not change any commands to use the new code.
- Pull out the hidden equivalent of process_each_pv
into an actual top level process_each_pv.
- Pull the prompts to the top level, and do not
run any prompts while locks are held.
The orphan lock is reacquired after any prompts are
done, and the devices being created are checked for
any change made while the lock was not held.
Previously, pvcreate_vol() was the shared function for
creating a PV for pvcreate, vgcreate, vgextend.
Now, it will be toollib function pvcreate_each_device().
pvcreate_vol() was called effectively as a helper, from
within vgcreate and vgextend code paths.
pvcreate_each_device() will be called at the same level
as other process_each functions.
One of the main problems with pvcreate_vol() is that
it included a hidden equivalent of process_each_pv for
each device being created:
pvcreate_vol() -> _pvcreate_check() ->
find_pv_by_name() -> get_pvs() ->
get_pvs_internal() -> _get_pvs() -> get_vgids() ->
/* equivalent to process_each_pv */
dm_list_iterate_items(vgids)
vg = vg_read_internal()
dm_list_iterate_items(&vg->pvs)
pvcreate_each_device() reorganizes the code so that
each-VG-each-PV loop is done once, and uses the standard
process_each_pv function at the top level of the function.
This uses the vg->pv_write_list in place of the
vg->pvs_to_write list, and eliminates the use of
pvcreate_params. The label remove and zeroing
steps are shifted out of vg_write() to the higher
level like pvcreate will do.
The vg->pv_write_list contains pv_list structs for which
vg_write() should call pv_write().
The new list will replace vg->pvs_to_write that contains
vg_to_create structs which are used to perform higher-level
pvcreate-related operations. The higher level pvcreate
operations will be moved out of vg_write() to higher levels.
Since we already check in few other places 'info' is not NULL,
do the same for others - however when info would be NULL
it more or less looks like internal error.
Reshuffle messages during pvremove.
Always print WARNING: when PV is in use so using options
--force --force doesn't make this important user
notification go away.
Simplify variable 'used' usage (so older gcc doesn't warn
about the use of unitilizied variable).
Add some '.' into messages.
Currently it's been checked for 'zero' header for thin-pool,
but lets use it always for cache as well - since it's relatively 'cheap'
detection of read 'error' problems as thin/cache tools
currently do not work fast enough in this case.
When update fails in suspend() (sending of messages
fails because metadata space is full) call resume(),
so the locking sequence works properly for clustering.
Also failing deactivation should unlock memory.
Fix reporting of Fail thin-pool target status
as attr[8] letter 'F'.
Report 'needs_check' status from thin-pool target via
attr field [4] (letter 'c'/'C'), and also via CheckNeeded field.
TODO: think about better name here?
TODO: lots of prop_not_implemented_set
Ask for confirmation when using pvcreate/pvremove on a PV which is
marked as belonging to a VG, just like we do in case of a PV which
belongs to known VG:
$ pvcreate -ff /dev/sda
Really INITIALIZE physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
/dev/sda: physical volume not initialized
$ pvremove -ff /dev/sda
Really WIPE LABELS from physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
/dev/sda: physical volume label not removed
The host that owns foreign VGs is responsible for fixing up PV_EXT_USED
flag - the same already applies to repairing any inconsistent VG.
This patch also moves the iteration over vg->pvs inside
_check_or_repair_pv_ext fn - it's cleaner this way.
pv->vg is not set yet during pvcreate processing. Use pv->fmt instead to
check for these fake PVs (all normal PVs have format defined, devices
which are not PVs don't have this set).
This fixes commit 0000db7f98.
Some of the PVs are not even orphan PVs - they're fake PVs - this can
happen if we're listing all devices with "pvs -a". Such PV must not
be marked as used.
The backup_restore_vg is used directly for restoring the VG from backup.
It's also used to do the VG conversions from one metadata format to
another which means vgconvert calls backup_restore_vg too.
When restoring VG from backup, we need to rewrite/write PV headers as
PVs may have been orphans before and now they're becoming part of some
VG - we need to write the PV_EXT_USED flag at least.
When using the backup_restore_vg for vgconvert, we need to write
completely new PV header in different format.
Avoid the special "pv_write" call and handling that was used before
this patch in vgconvert (vgconvert_single function to be more precise)
and reuse existing internal interface to register PV header for writing
(or rewriting) via vg->pvs_to_write list instead like we do it elsewhere
in the code.
This patch also resolves a problem in which PV headers with target
format were written in the vgconvert_single fn as orphans and VG
metadata were added later on - this was a tiny hack actually.
We can't do this now - we need to write the PV as belonging
to a VG because otherwise the PV_EXT_USED flag won't be written
properly (if the PV header is written as orphan, the PV_EXT_USED
is set to 0, of course, even though metadata are attached later).
So this patch removes this tiny inconsistency which was passing
just fine before because we didn't have any relation to the VG
in PV header before. Now we have the PV_EXT_USED flag which says
the "PV is used in some VG".
The same check as we already do for orphan PVs, just the other way
round now: if the PV is surely part of some VG and any PV the VG
contains does not have the PV_EXT_USED flag set, repair it.
For example - /dev/sda here is in VG vg and it's incorrectly not
marked as used by PV_EXT_USED flag:
pvs --binary -o pv_ext_vsn,pv_in_use
WARNING: Volume Group vg is not consistent.
WARNING: Repairing Physical Volume /dev/sda that is in Volume Group vg but not marked as used.
PV VG Fmt Attr PSize PFree ExtVsn PInUse
/dev/sda vg lvm2 a-- 124.00m 124.00m 2 1
