IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Using PRELOAD part would lead to problems when the problem
would happen before vg_write and vg_commit.
Also this change is necessary for snapshot creation sequence.
This is accomplished by reading associated sysfs information. For a dm device,
this is /sys/dev/block/major:minor/dm/name (supported in kernel version >= 2.6.29,
for older kernels, the behaviour is the same as for non-dm devices).
For a non-dm device, this is a readlink on /sys/dev/block/major:minor, e.g.
/sys/dev/block/253:0 --> ../../devices/virtual/block/dm-0.
The last component of the path is a proper kernel name (block device name).
One can request to read only kernel names by setting the 'prefer_kernel_name'
argument if needed.
LVM- prefix.
Try harder not to leave stray empty devices around (locally or remotely) when
reverting changes after failures while there are inactive tables.
If we know major:minor number of device (which is known after resume) we will
try to use sysfs to set/get read ahead parameters of device.
This avoid potential problem of blocking commands like 'dmsetup info' awaiting
for device being usable for open/close - i.e. overfilled thin pool may block
such command.
Add dm_get_status_thin_pool and dm_get_status_thin functions to
parse 'params' argument which is received via dm_get_next_target.
Returns filed structure allocated from given mempool.
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
Avoid creation of target type name when it's longer then
DM_MAX_TYPE_NAME (noticed by static analyzer where the
sp.target_type might be missing '\0' at the end.)
Before patch:
$> dmsetup create long
0 1000 looooooooooooooooooooooooooong
^D
device-mapper: reload ioctl failed: Invalid argument
After patch:
$> dmsetup create xxx
0 1000 looooooooooooooooooooooooooong
Target type name looooooooooooooooooooooooooong is too long.
Command failed
Remove DM_THIN_ERROR_DEVICE_ID from API.
Remove API warning.
Drop code that was using DM_THIN_ERROR_DEVICE_ID (already commented)
Remove debug message which slipped in through some previous commit.
A little code shuffling and adding support for
DM_THIN_ERROR_DEVICE_ID which might be eventually be used
for activation of thin which is going to be deleted.
For now we do not need it lvm.
Add a new node flag send_messages that is used to simplify
test when to call _node_send_messages().
Add call to _node_send_messages when pool is deeper in the tree.
There should be no need for retry for our internal devices - it would be hinding
our own bug in the tree processing.
Update error messages to show also also device name.
No WHATS_NEW - in release fix.
When DEBUG_MEM is used, the memory is trashed with extra pattern before real
free() is called, and as this memory was marked as non accessible when used with
valgrind, make it again usable.
Certain errno codes could be expected in some situations thus
add experimental support for them.
When expected errno is set after ioctl error - function skips error
printing and exits succefully.
Currently only useful for thin pool messages.
Version 2 of the userspace log protocol accepts return information during the
DM_ULOG_CTR exchange. The return information contains the name of the log
device that is being used (if there is one). The kernel can then register the
device via 'dm_get_device'. Amoung other things, this allows for userspace to
assemble a correct dependency tree of devices - critical for LVM handling of
suspend/resume calls.
Also, update dm-log-userspace.h to match the kernel header associated with
this protocol change. (Includes a version inc.)
The upstream kernel version that this file mirrors has changed, here is the
commit message:
commit 86a54a4802df10d23ccd655e2083e812fe990243
Author: Jonathan Brassow <jbrassow@redhat.com>
Date: Thu Jan 13 19:59:52 2011 +0000
dm log userspace: add version number to comms
This patch adds a 'version' field to the 'dm_ulog_request'
structure.
The 'version' field is taken from a portion of the unused
'padding' field in the 'dm_ulog_request' structure. This
was done to avoid changing the size of the structure and
possibly disrupting backwards compatibility.
The version number will help notify user-space daemons
when a change has been made to the kernel/userspace
log API.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
The current code does not always assign proper udev flags to sub-LVs (e.g.
mirror images and log LVs). This shows up especially during a splitmirror
operation in which an image is split off from a mirror to form a new LV.
A mirror with a disk log is actually composed of 4 different LVs: the 2
mirror images, the log, and the top-level LV that "glues" them all together.
When a 2-way mirror is split into two linear LVs, two of those LVs must be
removed. The segments of the image which is not split off to form the new
LV are transferred to the top-level LV. This is done so that the original
LV can maintain its major/minor, UUID, and name. The sub-lv from which the
segments were transferred gets an error segment as a transitory process
before it is eventually removed. (Note that if the error target was not put
in place, a resume_lv would result in two LVs pointing to the same segment!
If the machine crashes before the eventual removal of the sub-LV, the result
would be a residual LV with the same mapping as the original (now linear) LV.)
So, the two LVs that need to be removed are now the log device and the sub-LV
with the error segment. If udev_flags are not properly set, a resume will
cause the error LV to come up and be scanned by udev. This causes I/O errors.
Additionally, when udev scans sub-LVs (or former sub-LVs), it can cause races
when we are trying to remove those LVs. This is especially bad during failure
conditions.
When the mirror is suspended, the top-level along with its sub-LVs are
suspended. The changes (now 2 linear devices and the yet-to-be-removed log
and error LV) are committed. When the resume takes place on the original
LV, there are no longer links to the other sub-lvs through the LVM metadata.
The links are implicitly handled by querying the kernel for a list of
dependencies. This is done in the '_add_dev' function (which is recursively
called for each dependency found) - called through the following chain:
_add_dev
dm_tree_add_dev_with_udev_flags
<*** DM / LVM divide ***>
_add_dev_to_dtree
_add_lv_to_dtree
_create_partial_dtree
_tree_action
dev_manager_activate
_lv_activate_lv
_lv_resume
lv_resume_if_active
When udev flags are calculated by '_get_udev_flags', it is done by referencing
the 'logical_volume' structure. Those flags are then passed down into
'dm_tree_add_dev_with_udev_flags', which in turn passes them to '_add_dev'.
Unfortunately, when '_add_dev' is finding the dependencies, it has no way to
calculate their proper udev_flags. This is because it is below the DM/LVM
divide - it doesn't have access to the logical_volume structure. In fact,
'_add_dev' simply reuses the udev_flags given for the initial device! This
virtually guarentees the udev_flags are wrong for all the dependencies unless
they are reset by some other mechanism. The current code provides no such
mechanism. Even if '_add_new_lv_to_dtree' were called on the sub-devices -
which it isn't - entries already in the tree are simply passed over, failing
to reset any udev_flags. The solution must retain its implicit nature of
discovering dependencies and be able to go back over the dependencies found
to properly set the udev_flags.
My solution simply calls a new function before leaving '_add_new_lv_to_dtree'
that iterates over the dtree nodes to properly reset the udev_flags of any
children. It is important that this function occur after the '_add_dev' has
done its job of querying the kernel for a list of dependencies. It is this
list of children that we use to look up their respective LVs and properly
calculate the udev_flags.
This solution has worked for single machine, cluster, and cluster w/ exclusive
activation.
Make limits for thin data_block_size and device_id part of public API.
FIXME: read them possible from some kernel header file in the future ?
But we may need to support different values for different versions ?
Since it's internal function and we always check for NULL value
before call - this is safe.
Just for case add nonnull attribute so analyzer might better
catch error.
It's 100% equivalent test - since it always happen for the first iteration.
But the check for 'l' is understandable with analyzers - since analyzer
is not smart enough to deduce connection between root->child == NULL.
Before, we used to display "Can't remove open logical volume" which was
generic. There 3 possibilities of how a device could be opened:
- used by another device
- having a filesystem on that device which is mounted
- opened directly by an application
With the help of sysfs info, we can distinguish the first two situations.
The third one will be subject to "remove retry" logic - if it's opened
quickly (e.g. a parallel scan from within a udev rule run), this will
finish quickly and we can remove it once it has finished. If it's a
legitimate application that keeps the device opened, we'll do our best
to remove the device, but we will fail finally after a few retries.
Add dm_device_has_mounted_fs fn to check mounted filesystem on a device.
This requires sysfs directory to be correctly set via dm_set_sysfs_dir
(/sys by default). If sysfs dir is not used or it's set incorrectly,
dm_device_has_{holders,mounted_fs} will return 0!
Transfer of build_dm_uuid() function into libdm made uuid_prefix as parameter,
thus sizeof() was replaced with strlen() and room for '\0' missed.
As it's only fix in current version - no whatsnew.
This is a workaround for long-lasting problem with using the WATCH udev
rule. When trying to remove a DM device, this one can still be opened
while processing the event in parallel (generated based on the WATCH
udev rule).
Let's use this until we have a proper solution.
Makes dumpconfig whole-section output wrong in a different way from before,
but we should be able to merge cft_cmdline properly into cmd->cft now and
remove cascade.
functionality. A number of bugs (copied and pasted all over the code) should
disappear:
- most string lookup based on dm_config_find_node would segfault when
encountering a non-zero integer (the intention there was to print an
error message instead)
- check for required sections in metadata would have been satisfied by
values as well (i.e. not sections)
- encountering a section in place of expected flag value would have
segfaulted (due to assumed but unchecked cn->v != NULL)
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
This patch adds the ability to upconvert a raid1 array - say from 2-way to
3-way. It does not yet support upconverting linear to n-way.
The 'raid' device-mapper target allows for individual components (images) of
an array to be specified for rebuild. This mechanism is used when adding
new images to the array so that the new images can be resync'ed while the
rest of the images in the array can remain 'in-sync'. (There is no
mirror-on-mirror layering required.)
~> lvconvert --splitmirrors 1 --trackchanges vg/lv
The '--trackchanges' option allows a user the ability to use an image of
a RAID1 array for the purposes of temporary read-only access. The image
can be merged back into the array at a later time and only the blocks that
have changed in the array since the split will be resync'ed. This
operation can be thought of as a partial split. The image is never completely
extracted from the array, in that the array reserves the position the device
occupied and tracks the differences between the array and the split image via
a bitmap. The image itself is rendered read-only and the name (<LV>_rimage_*)
cannot be changed. The user can complete the split (permanently splitting the
image from the array) by re-issuing the 'lvconvert' command without the
'--trackchanges' argument and specifying the '--name' argument.
~> lvconvert --splitmirrors 1 --name my_split vg/lv
Merging the tracked image back into the array is done with the '--merge'
option (included in a follow-on patch).
~> lvconvert --merge vg/lv_rimage_<n>
The internal mechanics of this are relatively simple. The 'raid' device-
mapper target allows for the specification of an empty slot in an array
via '- -'. This is what will be used if a partial activation of an array
is ever required. (It would also be possible to use 'error' targets in
place of the '- -'.) If a RAID image is found to be both read-only and
visible, then it is considered separate from the array and '- -' is used
to hold it's position in the array. So, all that needs to be done to
temporarily split an image from the array /and/ cause the kernel target's
bitmap to track (aka "mark") changes made is to make the specified image
visible and read-only. To merge the device back into the array, the image
needs to be returned to the read/write state of the top-level LV and made
invisible.
Adding debuging functionality to lock and unlock memory pool.
2 ways to debug code:
crc - is default checksum/hash of the locked pool.
It gets slower when the pool is larger - so the check is only
made when VG is finaly released and it has been used more then
once.Thus the result is rather informative.
mprotect - quite fast all the time - but requires more memory and
currently it is using posix_memalign() - this could be
later modified to use dm_malloc() and align internally.
Tool segfaults when locked memory is modified and core
could be examined for faulty code section (backtrace).
Only fast memory pools could use mprotect for now -
so such debug builds cannot be combined with DEBUG_POOL.
Implementation described in doc/lvm2-raid.txt.
Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
When some target is passing empty parameters to some dm target,
report this as an internal error to better catch some broken
table construction (some mirror conversions seem to be doing
this for now).
This fn calls rm_dev_node directly - an exceptional case. It needs to check
the DM_UDEV_DISABLE_LIBRARY_FALLBACK flag directly (it's called in dm_task_run
normally where it's checked already).
and use this for the LVM critical section logic. Also report an error if
code tries to load a table while any device is known to be in the
suspended state.
(If the variety of problems these changes are showing up can't be fixed
before the next release, the error messages can be reduced to debug
level.)
are affected by the move. (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.
The current fix was selected so as to minimise the testing surface. I
hope eventually to replace it with a cleaner one that extends the
deptree code.
Some lvconvert scenarios still suffer from related problems.
Align strdup char* allocation just on 2 bytes.
It looks like wasting space to align strings on 8 bytes.
(Could be even 1byte - but for hashing it might eventually get better
perfomance - but probably hardly measurable).
TODO: check on various architectures it's not making any problems.
Avoid locking sum testing with valgrind compilation.
Make memory unaccessible in the valgrind for dm_pool_abadon_object.
Valgrind hinting should not be needed in _free_chunk for dm_free.
LVM doesn't behave correctly if running as non-root user,
there is warning when it detects it.
Despite this, it produces many error messages, saying nothing.
See https://bugzilla.redhat.com/show_bug.cgi?id=620571
This patch fixes two things:
1) Removes eror message from device_is_usable() which has no
information value anyway (real warning is printed inside it).
2) it fixes device-mapper initialization, if we support
core dm module autoload and device node is present, it should
fail early and not try recreate existing and correct node.
(non-root == permission denied here)
N.B. In future code should support user roles, some more
drastic checks in code are probably contraproductive now.
dm_hash binary functions takes void* key - so there is no need to cast
pointers to char* (also the hash key does not have trailing '\0').
This is slight API change, but presents no change for the API user side
it just allows to write code easier as the casting could be removed.
When the ->params string is empty - memory access is made on the byte
before allocated buffer (catched by valgrind) - in the case it would
constain 0x20 - it would even overwrite this buffer.
So fix by checking len > 0 before doing such access.
Also slightly optimise this loop from repeated strlen call.
As dm_report_field_string() doesn't modify content of data pointer,
it can be marked as const.
It's slight API change - but doesn't require any change on the user side
and supports wider range of arguments without const casting.
(i.e. we may use as paramater const lv struct this way: &lv->name)
As functions compiled within this define are apparently stil part of the public API,
(though lvm2 code is never using them unless this define is used for compilation),
keep functions available in the code for now -> revert.
Add new function dm_task_set_add_node() to select between 2 types
of node creation in device directory.
DM_ADD_NODE_ON_RESUME is now default and ensures node is created on
resume. Old original behavior is accessible with DM_ADD_NODE_ON_CREATE.
In this case node would be created during dmsetup create --notable.
For the user 2 new options for dmsetup create are added:
[{--addnodeonresume | --addnodeoncreate }]
Properly working node creation on resume is needed for proper operation
stacking and ability to correctly check in which state the device should
after whole udev transation.
With the ability to stack many operations in one udev transaction -
in same cases we are adding and removing same device at the same time
(i.e. deactivate followed by activate).
This leads to a problem of checking stacked operations:
i.e. remove /dev/node1 followed by create /dev/node1
If the node creation is handled with udev - there is a problem as
stacked operation gives warning about existing node1 and will try to
remove it - while next operation needs to recreate it.
Current code removes all previous stacked operation if the fs op is
FS_DEL - patch adds similar behavior for FS_ADD - it will try to
remove any 'delete' operation if udev is in use.
For FS_RENAME operation it seems to be more complex. But as we
are always stacking FS_READ_AHEAD after FS_ADD operation -
should be safe to remove all previous operation on the node
when udev is running.
Code does same checking for stacking libdm and liblvm operations.
As a very simple optimization counters were added for each stacked ops
type to avoid unneeded list scans if some operation does not exists in
the list.
Enable skipping of fs_unlock() (udev sync) if only DEL operations are staked.
as we do not use lv_info for already deleted nodes.
Fix assert abort of dmsetup (when compiled with pool debug)
dmsetup splitname --nameprefixes --noheadings --rows gvg-a2
Move pool begin in the inner loop - otherwise it would using
already 'ended' pool object.
As 'const' types are also passed to macro dm_list_struct_base -
keep offset calculation with const char pointers.
Fixes several gcc constness warnings.
Change API interface to accept even completely const array patterns.
This should present no change for libdm users and allows to pass
pattern arrays without cast to const char **.
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.
We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
Fix memory leak of field_id in _output_field function.
There's been a patch added recently to use dynamic allocation for metadata
tags buffer to remove the 4k limit (for writing metadata out). However, when
using reporting commands like vgs and lvs, we still need to fix libdm reporting
functions themselves to support such long outputs. So the buffer used in those
reporting functions is dynamic now.
The patch also includes a fix for field_id memory leak which was found in
the _output_field function.
Rather than hard code the size of the field, use a #define, so we can re-use.
The #define will be needed in a future patch when we extend the reporting
infrastructure to have 'get' and 'set' functions for each field, allowing
lvm2app functions which query any report field. In order to provide a
generic lookup based on the field id, we will define a type containing this
field id, and thus, we will need to re-use the length of this string as
it's defined inside libdevmapper.h.
We can't rely on the fact that udev should prepare the node with right major
and minor number to trigger the module autoloading. We have to take into
account that the node could be missing or it could exist with improper
major and minor number assigned (e.g. from previous kernel versions in
an environment with static nodes and without udev). Make any corrections
if needed!
