IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Introduce new implmentation of dm_task_get_info() function
with support for reading internal_suspend.
.
This time it is done in a 'versioned' way.
We keep the old fashion dm_task_get_info(Base) to implement
the old behavior of 1.02.95 libdm code.
libdm version 1.02.96 introduced 'macro' wrapper
dm_task_get_info_with_deferred_remove with new implementation
of dm_task_get_info() - we cannot do anything else then to
provide compatible version of this symbol.
Now in version 1.02.97 we add new versioned implementation of
dm_task_get_info(DM_1_02_97) symbol.
This has the effect that i.e. rpm build will finaly resolve proper
dependency on a new symbol - so it will be no longer possible,
to build a new binary and use old library
(rpm -q --provides will show libdevmapper.so.1.02(DM_1_02_97)(64bit))
Also the history is now tracked. If a new function is added (or
reimplemented), it needs to be placed in proper file,
so it could be exported with right versioning symbol.
File .exported_symbols.Base should and any existing older DM
should be treated as read-only after a release.
Also - only libdm has been currently enhanced with versioned .Base
file, as soon as other libs (liblvm, libdevmapper-event) needs changes
they should also get their exported symbol files - meanwhile
make.tmpl handles both cases.
Configure provides proper settings for
use_lvmetad and use_lvmpolld conf setttings.
When the build of polld & lvmetad, these settings
are enabled by default unless explicitelly disabled
with --disable-use-lvmetad/--disable-use-lvmpolld.
When available use nanosecond stat info.
If commands are running closely enough after config update,
the .cache file from persistent filter could have been ignored.
This happens sometimes during i.e. synthetic test suite run.
Require system ID to begin with an alphanumeric character.
Rename fn to make clear it's only validation for systemid
and always terminate result rather than imposing this on the caller.
Just like MD filtering that detects components of software RAID (md),
add detection for firmware RAID.
We're not adding any native code to detect this - there are lots of
firmware RAIDs out there which is just out of LVM scope. However,
with current changes with which we're able to get device info from
external sources (e.g. external_device_info_source="udev"), we can
do this easily if the external device status source has this kind
of information - which is the case of "udev" source where the results
of blkid scans are stored.
This detection should cover all firmware RAIDs that blkid can detect and
which are identified as:
ID_FS_TYPE = {adaptec,ddf,hpt45x,hpt37x,isw,jmicron,lsi_mega,nvidia,promise_fasttrack,silicon_medley,via}_raid_member
Support compile type configurable defaults for creation
of sparse volumes.
By default now create 'thin-pools' for sparse volumes.
Use the global/sparse_segtype_default to switch back to old
snapshots if needed.
Apply the same compile logic for newly introduces mirror/raid1 options.
2.02.106 added suffixes to some LV uuids in the kernel.
If any of these LVs is activated with 2.02.105 or earlier,
and then a later version is used, the LVs appear invisible and
activation commands fail.
The code now has to check the kernel for both old and new uuids.
Using suffixes for mirrors and raids will need more work,
before this could be enabled.
Meanwhile revert to previous behavior.
Keep suffixes for thins and caches.
Use suffixes for easier detection of private volumes.
This commit makes older volume UUIDs incompatible and
it most probably needs machine reboot after upgrade.
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
And use ifdefs there, not exposing it in the tool code itself.
Later in the future, we should probably make the PIDFILE and
daemon checking code available also in case the daemon itself
is not built.
Support upto 3 levels os nesting signal blocking.
As of today - code blocks signals immediatelly when it opens
VG in read-write mode - this however makes current prompt usage
then partially unusable since user may not 'break' command
during prompt (something most user would expect).
Until a better fix for prompting is implemented, put in support
for signal nesting - thus when prompt enables signal acceptance,
make it possible to really break command at this point.
Adding log_sys_debug for eventual logging of system errors.
(Using debug level, since currently signal handling functions
do not fail when any error is encoutered).
Even though we make pool volume as a public visible LV,
we still do not want tools to look at this volume.
While we do not create /dev/vg/lv link, device is still
accessible via /dev/mapper/vg-lv and there is no easy
way to recognize it's private without lvm2 metadata.
Enhance UUID with -pool suffix and directly skip
any LV with a suffix in device_is_usable() call.
TODO: enhance other targets with this logic.
blkid may probably use same simple logic.
This patch adds the new cachepool segment type - the first of two
necessary to eventually create 'cache' logical volumes. In addition
to the new segment type, updates to makefiles, configure files, the
lv_segment struct, and some necessary libdevmapper flags.
The cachepool is the LV and corresponding segment type that will hold
all information pertinent to the cache itself - it's size, cachemode,
cache policy, core arguments (like migration_threshold), etc.
There is a problem with the way mirrors have been designed to handle
failures that is resulting in stuck LVM processes and hung I/O. When
mirrors encounter a write failure, they block I/O and notify userspace
to reconfigure the mirror to remove failed devices. This process is
open to a couple races:
1) Any LVM process other than the one that is meant to deal with the
mirror failure can attempt to read the mirror, fail, and block other
LVM commands (including the repair command) from proceeding due to
holding a lock on the volume group.
2) If there are multiple mirrors that suffer a failure in the same
volume group, a repair can block while attempting to read the LVM
label from one mirror while trying to repair the other.
Mitigation of these races has been attempted by disallowing label reading
of mirrors that are either suspended or are indicated as blocking by
the kernel. While this has closed the window of opportunity for hitting
the above problems considerably, it hasn't closed it completely. This is
because it is still possible to start an LVM command, read the status of
the mirror as healthy, and then perform the read for the label at the
moment after a the failure is discovered by the kernel.
I can see two solutions to this problem:
1) Allow users to configure whether mirrors can be candidates for LVM
labels (i.e. whether PVs can be created on mirror LVs). If the user
chooses to allow label scanning of mirror LVs, it will be at the expense
of a possible hang in I/O or LVM processes.
2) Instrument a way to allow asynchronous label reading - allowing
blocked label reads to be ignored while continuing to process the LVM
command. This would action would allow LVM commands to continue even
though they would have otherwise blocked trying to read a mirror. They
can then release their lock and allow a repair command to commence. In
the event of #2 above, the repair command already in progress can continue
and repair the failed mirror.
This patch brings solution #1. If solution #2 is developed later on, the
configuration option created in #1 can be negated - allowing mirrors to
be scanned for labels by default once again.
- null_fd resource leak on error path in _reopen_fd_null fn
- dead code in verify_message in clvmd code
- dead code in _init_filter_components in toolcontext code
- null dereference in dm_prepare_selinux_context on error path if
setfscreatecon fails while resetting SELinux context
Add new configure lvm.conf options for binaries thin_repair
and thin_dump.
Those are part of device-mapper-persistent-data package
and will be used for recovery of thin_pool.
Configuration profiles are selected configuration items that can
be loaded dynamically on demand and overlayed over existing
configuration on demand (either on cmd line by selecting the profile
name to be used globally or retrieved from metadata and used per
VG/LV basis only).
The default directory where profiles are stored is configurable
at compile time with --with-default-profile-subdir.
For example, the old call and reference:
find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)
...now becomes:
find_config_tree_str(cmd, devices_dir_CFG)
So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
Add log/debug_classes to lvm.conf to allow debug messages to be
classified and filtered at runtime.
The dm_errno field is only used by log_error(), so I've redefined it
for log_debug() messages to hold the message class.
By default, all existing messages appear, but we can add categories that
generate high volumes of data, such as logging all traffic to/from
lvmetad.
Use configure --enable-python_bindings to generate them.
Note that the Makefiles do not yet control the owner or permissions of
the two new files on installation.
We should check whether the fd is opened before trying to reopen it.
For example, the stdin is closed in test/lib/harness.c causing the
test suite to fail.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
There were several hard-coded values for run directory around the code.
Also, some tools are DM specific only, others are LVM specific and there
was no distinction made here before. With this patch applied, we have
this cleaned up a bit (subsystem in brackets, defaults in parentheses):
[common] configurable PID_DIR (/var/run)
lvm [lvm] configurable RUN_DIR (/var/run/lvm)
configurable locking dir (/var/lock/lvm)
clvmd [lvm] configurable pid file (PID_DIR/clvmd.pid)
socket (RUN_DIR/clvmd.sock)
lvmetad [lvm] configurable pid file (PID_DIR/lvmetad.pid)
socket (RUN_DIR/lvmetad.socket)
dm [dm] configurable DM_RUN_DIR (/var/run)
cmirrord [dm] configurable pid file (PID_DIR/cmirrord.pid)
dmeventd [dm] configurable pid file (PID_DIR/dmeventd.pid)
server fifo (DM_RUN_DIR/dmeventd-server)
client fifo (DM_RUN_DIR/dmeventd-client)
The changes briefly:
- added configure --with-default-pid-dir
- added configure --with-default-dm-run-dir
- added configure --with-lvmetad-pidfile
- by default, using one common pid directory for everything
(only lvmetad was not following this before)
With latest changes in the udev, some deprecated functions were removed
from libudev amongst which there was the "udev_get_dev_path" function
we used to compare a device directory used in udev and directore set in
libdevmapper. The "/dev" is hardcoded in udev now (udev version >= 183).
Amongst other changes and from packager's point of view, it's also
important to note that the libudev development library ("libudev-devel")
could now be a part of the systemd development library ("systemd-devel")
because of the udev + systemd merge.
The OpenAIS checkpoint library is going away; therefore, cmirrord must
operate without it. The algorithms the handle the timing of when to send
a checkpoint, the determination of what to send, and which ongoing cluster
requests are relevent with respect to the checkpoints are unaffected. We
need only replace the functions that actually perform the storing/transmitting
and retrieving/receiving of the checkpoint data. Rather than store the
checkpoint data in an OpenAIS checkpoint file, we simply transmit it along
with the message that notifies the incoming node that the checkpoint is
ready.
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
Add config option to enable crc checking of VG structures.
Currently it's disabled by default.
For the internal test-suite this check it is enabled.
Note: In the case the internal error is detected, debug build with
compile option DEBUG_ENFORCE_POOL_LOCKING helps to catch the source
of the problem.
Implementation described in doc/lvm2-raid.txt.
Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
There's a possibility someone will use the '/' in the hostname. Since we
generate a temporary file name (path) including the hostname, any '/' would
be ambiguous.
We can always set such hostname using 'sethostname' from unistd.h. But the
'hostname' command already includes the check and removes the '/' char.
However, some old versions still allow that.
See: https://bugzilla.redhat.com/show_bug.cgi?id=711445.
Since this is only a temporary name and the possibility of this error is
quite negligible, we don't need any complex escape sequence here, just a
simple char replace.
Also, add a new 'obtain_device_list_from_udev' setting to lvm.conf with which
we can turn this feature on or off if needed.
If set, the cache of block device nodes with all associated symlinks
will be constructed out of the existing udev database content.
This avoids using and opening any inapplicable non-block devices or
subdirectories found in the device directory. This setting is applied
to udev-managed device directory only, other directories will be scanned
fully. LVM2 needs to be compiled with udev support for this setting to
take effect. N.B. Any device node or symlink not managed by udev in
udev directory will be ignored with this setting on.
We have 3 components and traling '\0' so allocate proper room for all of them.
Problem was nicely hidden by allocation from pool and allocation aligment
offset - so to trigger real problem with this one is actually hard.
Add configurable option to define minimal size of
of block device usable as a PV.
pv_min_size() is added to lvm-globals and it's being
initialized through _process_config.
Macro PV_MIN_SIZE is unused and removed.
New define DEFAULT_PV_MIN_SIZE_KB is added to lvm-global
and unlike PV_MIN_SIZE it uses KB units.
Should help users with various slow devices attached to the system,
which cannot be easily filtered out (like FDD on /dev/sdX):
https://bugzilla.redhat.com/show_bug.cgi?id=644578
Fix regresion from 2.02.75 speedup - so currently crc32 is a little bit
more complicated on big-endian CPU as the uint32_t needs to be shifted
on here.
Make configurable default behaviour how to deal with device node creates.
With udev system natural options should be 'resume'.
For older systems where user expect there is node in /dev/mapper immediately
after dmsetup create --notable - use 'create'
FIXME:
Code needs fixing passing this flag through udev cookie.
As sync_local_dev_names() cannot be called within activation context,
add new parametr which allows to select if the sync call is needed
before executing new command.
Patch updates exec_cmd() and adds 3rd parameter with pointer for
status value, so caller might examine returned status code.
If the passed pointer is NULL, behavior is unmodified.
Patch allows to confinue with lvresize if the failure from fsadm check is
caused by mounted filesystem as many of filesystem resize tools do support
online filesystem resize. (originally user had to use flag '-n' to bypass
this filesystem check)
Use _even_rand() function instead of floor() in _bitset_with_random_bits().
floor() function is missing in dietlibc (on architectures other than x86).
Moreover using floor() to clip rand results does not assure even result
distribution. _even_rand() uses integer arithmetic only and is designed to
return evenly distributed results.
> Looks OK to me. It took a while to decipher what is the exact meaning of
> the loop in _even_rand (to a non-pseudorandomness-expert) but I am
> fairly comfortable with it now. If I understand this correctly, it
> rejects numbers that come from an "incomplete" slice of the RAND_MAX
> space (considering the number space [0, RAND_MAX] is divided into some
> "max"-sized slices and at most a single smaller slice, between [n*max,
> RAND_MAX] for suitable n -- numbers from this last slice are discarded
> because they could distort the distribution in favour of smaller
> numbers).
Signed-off-by: Przemyslaw Iskra <sparky <at> pld-linux.org>
Reviewed-by: Petr Rockai <prockai <at> redhat.com>
Revert to old glibc behaviour for vsnprintf used in emit_to_buffer fn.
Otherwise, the check that follows would be wrong for new glibc versions.
This caused the rh bug #633033 to be undetected and pass throught the check,
corrupting the metadata!
We can already detect MD devices internally. But when using MD partitions,
these have "block extended major" (blkext) assigned (259). Blkext major
is also used in general, so we need to check whether the original device
is an MD device actually.
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
Adding configure.in support for Replicators.
Adding basic lib lvm support for Replicators.
Adding flags REPLICATOR and REPLICATOR_LOG.
Adding segments SEG_REPLICATOR and SEG_REPLICATOR_DEV.
Adding basic methods for handling replicator metadata.
