IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Make it easier to replace missing segments with 'zero' returning
target - otherwise user would have to create some extra target
to provide zeros as /dev/zero can't be used (not a block device).
Also break code loop when segment is found and make it an INTERNAL_ERROR
where it's missing.
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).
When user is aware of related possible troubles he
may increase the limit in lvm.conf.
Also verbosely inform user about possible solution.
Code works for both lvcreate and lvconvert.
Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
Commit e947c362dd introduced
config_settings.h file for central place to store all definitions for
config options. By mistake, it used report/colums_as_rows instead
of report/columns_as_rows (missing "n" in "columns").
Some settings are not suitable for override in interactive/shell
mode because such settings may confuse the code and it may end
up with unexpected behaviour. This is because of the fact that
once we're in the interactive/shell mode, we have already applied
some settings for the shell itself and we can't override them
further because we're already using those settings to drive the
interactive/shell mode. Such settings would get ignored silently
or, in worse case, they would mess up the existing configuration.
Commit 3928c96a37 introduced
new defaults for raid number of stripes, which may cause
backwards compatibility issues with customer scripts.
Adding configurable option 'raid_stripe_all_devices' defaulting
to '0' (i.e. off = new behaviour) to select the old behaviour
of using all PVs in the VG or those provided on the command line.
In case any scripts rely on the old behaviour, just set
'raid_strip_all_devices = 1'.
- resolves rhbz1354650
New report/output_format configuration sets the output format used
for all LVM commands globally. Currently, there are 2 formats
recognized:
- basic (the classical basic output with columns and rows, used by default)
- json (output is in json format)
Wait to compare and choose alternate duplicate devices until
after all devices are scanned. During scanning, the first
duplicate dev is kept in lvmcache, and others are kept in a
new list (_found_duplicate_devs).
After all devices are scanned, compare all the duplicates
available for a given PVID and decide which is best.
If the dev used in lvmcache is changed, drop the old dev
from lvmcache entirely and rescan the replacement dev.
Previously the VG metadata from the old dev was kept in
lvmcache and only the dev was replaced.
A new config setting devices/allow_changes_with_duplicate_pvs
can be set to 0 which disallows modifying a VG or activating
LVs in it when the VG contains PVs with duplicate devices.
Set to 1 is the old behavior which allowed the VG to be
changed.
The logic for which of two devs is preferred has changed.
The primary goal is to choose a device that is currently
in use if the other isn't, e.g. by an active LV.
. prefer dev with fs mounted if the other doesn't, else
. prefer dev that is dm if the other isn't, else
. prefer dev in subsystem if the other isn't
If neither device is preferred by these rules, then don't
change devices in lvmcache, leaving the one that was found
first.
The previous logic for preferring a device was:
. prefer dev in subsystem if the other isn't, else
. prefer dev without holders if the other has holders, else
. prefer dev that is dm if the other isn't
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
When a command modifies a PV or VG, or changes the
activation state of an LV, it will send a dbus
notification when the command is finished. This
can be enabled/disabled with a config setting.
The metadata/record_lvs_history is global switch which enables or
disables recording historical LVs in metadata.
If both metadata/record_lvs_history=1 lvm.conf option and
--nohistory command switch is used at the same time, the
--nohistory prevails.
'verbose' was marked as a boolean option while it
takes integer args - so it has limited usage to 0 or 1,
but we supported 0-4 at least.
Fix it by switching to corrent int type.
(Hopefully noone was trying to use this variable as true/yes/false/no
way - as the would be unsupported/undocumented).
Normally, we generate and provide lvm.conf file where use_blkid_wiping
is set based on whether support for this is compiled in or not. This was
generated properly based on configure.
However, if lvm.conf is not used at all (someone deletes it) or the value
in lvm.conf is commented out (user edited it), we still need to use
proper default value that is based on DEFAULT_USE_BLKID_WIPING taken
from configure script - we used hardcoded value of "1" in this case
by mistake.
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.
In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.
For example:
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""
$ lvs vg
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize
lvol0 vg -wi-a----- 4.00m
This mainly makes the description text use 80 columns.
There are a few minor adjustments to wording to help
the text layout, and a couple minor improvements to
descriptions.
Move code which runtime detects settings for cache_policy
out of config dir to cache seg handling code.
Also mark cache_mode as command profilable setting.
As cache_policy is evaluated in runtime, we no longer should use
CFG_COMMENTED, but have to switch to CFG_UNDEFINED.
So as long as the value is undefined, it's runtime evaluated.
Once it's set - it's always respected (no runtime fallback).
Also fix version of introduced settings to 2.2.128.
Add code to detect available cache features.
Support policy_mq & policy_smq features which might be disabled.
Introduce global_cache_disabled_features_CFG.
Add new profilable configurables:
allocation/cache_policy
allocation/cache_settings
and mark allocation/cache_pool_chunk_size as profilable as well.
Obsolete allocation/cache_pool_cachemode and
introduce new allocation/cache_mode instead.
Rename DEFAULT_CACHE_POOL_POLICY to DEFAULT_CACHE_POLICY.
The CFG_SECTION_NO_CHECK flag can be used to mark a section
and its whole subtree as containing settings where checks
won't be made (lvmconfig --validate).
These are setting where we don't know the names and and type
in advance and they're recognized in runtime. As we don't know
the type and name in advance, we can't do any checks here
of course.
Use this flag with great care as it disables config checks
for the whole config subtree found under such section.
This flag is going to be used by subsequent patches from
Zdenek to support some cache settings...
Require global/{thin,cache}_{check,repair}_options to be always defined.
If not defined directly by user in the configuration and if there's no
concrete default option to use, make "" (empty string) the default one -
it's then clearly visible in the "lvmconfig --type default" (and
generated lvm.conf) and also it makes its handling in the code more
straightforward so we don't need to handle undefined values.
This means, if there are no default values for these settings defined,
we end up with this generated now:
{thin,cache}_{check,repair}_options = [ "" ]
So the value is never undefined and if it is, it's an error.
(The cache_repair_options is actually not used in the code at the moment,
but once the code using this setting is in, it will follow the same logic
as used for thin_repair_options.)
including the allow_override_lock_modes setting.
It was not possible to override default lock modes any longer,
since the command line options had already been removed.
A mechanism will probably be required later that puts part of
this back.
Just like we have DEFAULT_USE_LVMETAD (or DEFUALT_USE_LVMPOLLD), use
fallback_to_lvm1=1 lvm.conf setting if we configured lvm2 with
--enable-lvm1-fallback and use fallback_to_lvm1=0 otherwise.
Also, generate proper lvm.conf.in with unconfigured value.
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).
For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
lvol1 vg -wi-a----- 4.00m 2015-06-29 09:17:11 +0200
(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m @1435241914
lvol1 vg -wi-a----- 4.00m @1435562231
It's not an error to define empty values for
{thin,cache}_{check,repair}_options - such empty value means no
options are passed when these external commands are called.
If blkid wiping is possible, than set use_blkid_wiping=1 and
use_blkid_wiping=0 otherwise for its default value. If blkid wiping
is disabled during configure and use_blkid_wiping=1 is set by chance,
it's simply ignored - this patch is just a cleanup that makes it more
obvious for the user (we use similar logic for use_lvmetad and
use_lvmpolld settings).
Default value for lvmetad and lvmpolld has hooks in configure script,
the "lvmconfig --type default --unconfigured" should display:
use_lvmetad = @DEFAULT_USE_LVMETAD@
use_lvmpolld = @DEFAULT_USE_LVMPOLLD@
Note that these settings are not of string type. Recent change (the
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES formatting flag) makes it
possible to recognize that the setting is not of string type and if
there's unconfigured value defined for it, the enclosing " " is
automatically removed on output.
Do not use "#S" (blank string) as default value as that ends up with
'key = [ "" ]' to be generated which is not what we want in most cases.
Also, fix default values for global/{thin,cache}_{check,repair}_options
and avoid assigning blank values. For example, the thin_check_options
had this set as default value previously:
"#S" DEFAULT_THIN_CHECK_OPTION1 "#S" DEFAULT_THIN_CHECK_OPTION2
If any (or both) of DEFAULT_THIN_CHECK_OPTION* variables was set
to "", we ended up with clumsy default value generated like:
thin_check_options = [ "-q", "" ]
With this patch, we end up with correct:
thin_check_options = [ "-q" ]
or, if all options are undefined:
thin_check_options = [ ]
Which is the correct way to express this.
There are two basic groups of formatting flags (32 bits):
- common ones applicable for all config value types (lower 16 bits)
- type-related formatting flags (higher 16 bits)
With this patch, we initially support four new flags that
modify the the way the config value is displayed:
Common flags:
=============
DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
to be enclosed in "[ ]" even if there's only one item
(previously, there was no way to recognize an array with one
item and scalar value, hence array values with one member
were always displayed without "[ ]" which libdm accepted
when reading, but it may have been misleading for users)
DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
be inserted in "key = value" (or key = [ value, value, ... ] in
case of arrays), compared to "key=value" seen on output before.
This makes the output more readable for users.
Type-related flags:
===================
DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
"0" as a prefix (libdm's config reading code can handle this via
strtol just fine so it's properly recognized as number in octal
form already if there's "0" used as prefix)
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
strings without enclosing " "
This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
This patch fixes segfault which was caused by incorrectly marking some
settings CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED - the
ones which have NULL default value, hence they're really undefined.
A regression caused by a98ceceb1d.
For example:
$ lvmconfig log/file
file="/a"
Before this patch:
$ lvmconfig --type diff
Segmentation fault (core dumped)
With this patch applied:
$ lvmconfig --type diff
log {
file="/a"
}
The same applies for these settings:
log/activate_file
global/library_dir
global/system_id_file
<disk_area>/disk_area_id
There were also other settings with NULL default value and marked as
CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED, but they were
cfg_array config settings where the NULL value was not causing segfault
(NULL == empty array).
Use CFG_DEFAULT_COMMENTED and CFG_DEFAULT_UNDEFINED to
replicate the existing comments in example.conf.
Fix host_list to be cfg_array.
UNDEFINED is only used if the value depends on other
system/kernel values outside of lvm. The most common
case is when dm-thin or dm-cache have built-in default
settings in the kernel, and lvm will use those built-in
default values unless the corresponding lvm config setting
is set.
COMMENTED is used to comment out the default setting in
lvm.conf. The effect is that if the LVM version is
upgraded, and the new version of LVM has new built-in
default values, the new defaults are used by LVM unless
the previous default value was set (uncommented) in lvm.conf.
Configure provides proper settings for
use_lvmetad and use_lvmpolld conf setttings.
When the build of polld & lvmetad, these settings
are enabled by default unless explicitelly disabled
with --disable-use-lvmetad/--disable-use-lvmpolld.
A preparatory code for marking configuration nodes as deprecated:
- struct cfg_def_item gains 2 new fields ("deprecated_since_version" and "deprecation_comment"
- cfg* macros to handle new fields
- related config_settings.h edits to add new fields for each item (null for all at the moment)
Patch with implementation will follow...
These settings are in the "unsupported" group:
devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
These settings are in the "advanced" group:
devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs
Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).
By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
Describe
thin_check_options, thin_repair_options,
cache_check_option, scache_repair_options
as a "list of options", rather than a "string of options"
because a single string, e.g. "-q --clear-needs-check-flag"
does not work, and needs to be entered as a list,
e.g. ["-q", "--clear-needs-check-flag"]
The settings which have their default value evaluated in runtime should
have their 'unconfigured' counterparts also evaluated in runtime since
those values can be constructed by using other settings.
For example, before this patch:
$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="/etc/lvm/cache/.cache
With this patch applied:
$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@/.cache"
By default these are empty strings, so the config settings
should be flagged as undefined, so they will be commented
out of the generated config. Otherwise, the lines:
thin_repair_options=""
cache_repair_options=""
in the dump output cause a warning when processed since
lvm doesn't want an empty string.
Also regenerate lvm.conf.in.
