IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The md filter can operate in two native modes:
- normal: reads only the start of each device
- full: reads both the start and end of each device
md 1.0 devices place the superblock at the end of the device,
so components of this version will only be identified and
excluded when lvm uses the full md filter.
Previously, the full md filter was only used in commands
that could write to the device. Now, the full md filter
is also applied when there is an md 1.0 device present
on the system. This means the 'pvs' command can avoid
displaying md 1.0 components (at the cost of doubling
the i/o to every device on the system.)
(The md filter can operate in a third mode, using udev,
but this is disabled by default because there have been
problems with reliability of the info returned from udev.)
When converting from striped/raid0/raid0_meta
to raid6 with > 2 stripes, allow possible
direct conversion (to raid6_n_6).
In case of 2 stripes, first convert to raid5_n to restripe
to at least 3 data stripes (the raid6 minimum in lvm2) in
a second conversion before finally converting to raid6_n_6.
As before, raid6_n_6 then can be converted
to any other raid6 layout.
Enhance lvconvert-raid-takeover.sh to test the
2 stripes conversions to raid6.
Resolves: rhbz1624038
(cherry picked from commit e2e30a64ab)
Conflicts:
WHATS_NEW
"lvconvert --type linear RaidLV" on striped and raid4/5/6/10
have to provide the convenient interim layouts. Fix involves
a cleanup to the convenience type function.
As a result of testing, add missing sync waits to
lvconvert-raid-reshape-linear_to_raid6-single-type.sh.
Resolves: rhbz1447809
(cherry picked from commit e83c4f07ca)
Conflicts:
WHATS_NEW
Conversion to striped from raid0/raid0_meta is directly possible.
Fix a regression setting superfluous interim raid5_n conversion type
introduced by commit bd7cdd0b09.
Add new test script lvconvert-raid0-striped.sh.
Resolves: rhbz1608067
(cherry picked from commit 4578411633)
Conflicts:
WHATS_NEW
Prohibit, because the tracking can't continue and
further conversions may fail with bogus error messages.
Resolves: rhbz1579072
(cherry picked from commit a004bb07f1)
Conflicts:
WHATS_NEW
Prohibit conversions of raid1 split trackchanges SubLVs
because they will fail to get merged back into the RaidLV.
Resolves: rhbz1579438
(cherry picked from commit 8b0729af0f)
Conflicts:
WHATS_NEW
Add tests for linear <-> striped|raid* conversions.
Add region_size config to reshape tests to avoid test
failures in case of it being defined unexpectedly in lvm.conf.
Related: rhbz1439925
Related: rhbz1447809
(cherry picked from commit 3810fd8d0d)
We have been warning about duplicate devices (and disabling lvmetad)
immediately when the dup was detected (during label_scan). Move the
warnings (and the disabling) to happen later, after label_scan is
finished.
This lets us avoid an unwanted warning message about duplicates
in the special case were md components are eliminated during the
duplicate device resolution.
This minor patch fixes grammar in a few messages which get
printed to users. It also fixes the same grammar mistake in
several comments.
Signed-off-by: Rick Elrod <relrod@redhat.com>
--
Unfortunatelly on kernels <4.16 lvm2 can't user brd ramdisks
for backend device as number of test is failing with this kernel
message:
device-mapper: ioctl: can't change device type after initial table load.
caused by DAX request-based handling, and lvm2 tries to replace device
with backend 'error' bio-based device and such table reload is being
rejected.
So ATM keep ramdisk only on most recent kernel to experiment a bit,
for older machines just stay safe and keep old slower loop backend.
While newer system can detect need for 4K mkfs, on older test machines
running test suite over 4k is reporting problems.
Some more generic solution is needed thought.
When test happens to run in tmpfs, it cannot use O_DIRECT (unsupported
with tmpfs).
CHECKME: unsure if detection of tmpfs is 'valid' but kind of works and
is very simple.
As Makefiles already do use target with name 'device-mapper'
rename this new device-mapper dir to non-conflicting name.
We also seem to already use '_' in other dir names.
Also rename device_mapper/Makefile to source for generating Makefile.in
so we can use it for build in other source dirs properly.
It's very hard to use some 'non-recurive' Makefiles with
rest of system running 'recursively'.
So ATM drop inclusion of subdir makefile and add support
for 2 new top-level targets:
unit-test (builds test/unit dir)
run-unit-test (build & run test/unit/unit-test run)
Just like 52656c89fd
when now cache is compiled in 'unditionally'.
This patch is actually enforce by changes in
commit: 2bc896f2a3
where CACHE value is not set anymore.
If the test does not need root, it can use 'SKIP_ROOT_DM_CHECK'.
For such test no actions needed root to initilize DM devices and
nodes will be take and test can check i.e. functional unit tests.
Usage of dm_delay looks to be slowing not just 'delayed' portion
of device, but due to the fact it's also slows down ANY flush
operation on such device it's overal speed impact is huge.
In some case we can however user other methods to slowdown disk writes,
in case of old dm 'mirror' target we can throttle I/O of mirror
synchronisation giving the next commands enough time to test couple
race conditions.
Usage:
throttle_dm_mirror [percentage]
Thtrottle down sync speed (lowest is '1' which is also default when
unspecified)
restore_dm_mirror
Restores the value of throttling before call of 'throttle_dm_mirror'
Usually it should '100'
Currently usage of loop device over backend file in ramdisk (tmpfs)
is actually causing unnecassary memory consution, since just
reading such loop device is causing RAM provisioning.
This patch add another possible way how to use ramdisk directly
through 'brd' device when possible (and allowed).
This however has it's limitation as well - brd does not support
TRIM, so the only way how to erase is to remove brd module ??
Alse there is 4K sector size limitation imposed by ramdisk.
Anyway - for some mirror test that were using large amount of
disk space (tens of MB) this brings noticable speed boost.
(But could be worth to solve the slowness of loop in kernel?)
To prevent using 'brd' for testing set LVM_TEST_PREFER_BRD=0
like this:
make check_local LVM_TEST_PREFER_BRD=0
This test can't use brd (ramdisk) as backend since for some
weird reason lsblk is not listing these device.
TODO: test could be probably rewritten to avoid using lsblk somehow??
When the backend device supports only 4K blocks (like ramdisk)
we cannot use for testing any smaller blocksize.
So recalc test for 4K extent size.
We may possibly introduce one list extra test that
can be executed on devices with 512b sectors to
check lvm2 support those min extent sizes...
An implementation of an adaptive radix tree. Has the following nice
properties:
- At least as fast as the hash table
- Uses less memory
- You don't need to give an expected size when you create
- It scales nicely (ie. no large reallocations like the hash table).
- You can iterate the keys in lexicographical order.
Only insert and lookup are implemented so far. Plus there's a lot
more performance to come.
