IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There was no effect from having this wrong yet, because the
tree of callers only ever cared about the answer to the first
condition (!response), which determines whether a lock is
held or not. Correct responses, however, are needed soon.
Instead of implicitly syncing udev operation in clustered and
file locking code - call synchronization directly in lock_vol() when
the operation unlocks VG
The problem is missing implicit fs_unlock() in the no_locking code.
This is used with --sysinit on read-only filesystem locking dir.
In this case vgchange -ay could exit before all udev nodes are properly
synchronised and may cause problems with accessing such node right after
vgchange --sysinint command is finished.
Add test case for vgchange --sysinit.
Improve condition within lock_vol so we are not calling extra unlock
if the volume just has been deactivated.
Patch uses lck_type and replaces negative 'and' condition to more
readable 'or' condition.
Few missing strace traces added.
Stop calling fs_unlock() from lv_de/activate().
Start using internal lvm fs cookie for dm_tree.
Stop directly calling dm_udev_wait() and
dm_tree_set/get_cookie() from activate code -
it's now called through fs_unlock() function.
Add lvm_do_fs_unlock()
Call fs_unlock() when unlocking vg where implicit unlock solves the
problem also for cluster - thus no extra command for clustering
environment is required - only lvm_do_fs_unlock() function is added
to call lvm's fs_unlock() while holding lvm_lock mutex in clvmd.
Add fs_unlock() also to set_lv() so the command waits until devices
are ready for regular open (i.e. wiping its begining).
Move fs_unlock() prototype to activation.h to keep fs.h private
in lib/activate dir and not expose other functions from this header.
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.
We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
Ignore snapshots when performing mirror recovery beneath an origin.
Pass LCK_ORIGIN_ONLY flag around cluster.
Add suspend_lv_origin and resume_lv_origin using LCK_ORIGIN_ONLY.
Code is mixing up internal DLM and LVM definitions of lock
modes and flags.
OpenAIS and singlenode locking do not depend on DLM but
code currently cannot be compiled without libdlm.h!
LCK_* flags is LVM abstraction, used through all the code.
Only low-level backend (clvmd-cman etc) should use DLM definitions,
also this code should do all needed conversions.
Because there are two DLM flags used in generic code
(NOQUEUE, CONVERT) we define it similar way like lock modes.
(So all needed binary-compatible flags are on one place in locking.h)
(Further code cleaning still needed, though:-)
A shortcut for --ignorelockingfailure, --ignoremonitoring, --poll n options
and LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable used all at
once in initialisation scripts (e.g. rc.sysinit or initrd).
Target install_dm_plugin installs files to libdir/device-mapper.
Target install_lvm2_plugin installs files to libdir/lvm2.
Both targets creates relative links to libdir to keep the code
compatible with current dlopen handling.
Once we will be able to read plugins from subdir, links
could be removed.
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
Because we have now strong rule for lock ordering:
- VG locks must be taken in alphabetical order
- ORPHAN locks must be the last
vgs_locked() is now not needed.
This fixes problem with orphan locking, e.g.
vgremove VG1 | vgremove VG2
lock(VG1) | lock(VG2)
lock(ORPHAN) | lock(ORPHAN) -> fail, non-blocking
https://bugzilla.redhat.com/show_bug.cgi?id=578413
(More similar places in code.)
clvmd's do_lock_lv() already properly controls dmeventd monitoring based
on LCK_DMEVENTD_MONITOR_MODE in lock_flags -- though one small fix was
needed for this to work: _lock_for_cluster() must treat
dmeventd_monitor_mode()'s return as a tri-state value.
Also cleanup do_lock_lv() to:
- explicitly init_dmeventd_monitor() based on LCK_DMEVENTD_MONITOR_MODE
- no longer reset init_dmeventd_monitor() to default at the end of
do_lock_lv() -- it is unnecessary
This patch adds a new implementation of locking function instead
of mlockall() that may lock way too much memory (>100MB).
New function instead uses mlock() system call and selectively locks
memory areas from /proc/self/maps trying to avoid locking areas
unused during lock-ed state.
Patch also adds struct cmd_context to all memlock() calls to have
access to configuration.
For backward compatibility functionality of mlockall()
is preserved with "activation/use_mlockall" flag.
As a simple check, locking and unlocking counts the amount of memory
and compares whether values are matching.
more descriptive message if locking fails instead of
"Locking type -1 initialisation failed."
Use read-only locking instead of misleading ignorelocking option
in message.
This patch tries to correctly track changes in lvmcache related to commit/revert.
For vg_commit: if there is cached precommitted metadata, after successfull commit
these metadata must be tracked as committed.
For vg_revert: remote nodes must drop precommitted metadata and its flag in lvmcache.
(N.B. Patch do not touch LV locks here in any way.)
All this machinery is needed to properly solve remote node cache invalidaton which
cause several problems recently observed.
Lock mode is int masked by LCK_TYPE_MASK, always.
Patch also remove uneccessary masking lock flag on sender side,
if masking is needed, it is don on client side already.
- Add drop_precommitted flag to force drop precommitted metadata
- add lvmcache_commit_metadata() which upgrades precommitted metadata in cache
No functional change in this patch - just preparation for following change.
And decode flags in humar readable form in client.
And clean some trailing whitespaces.
No functional change in this patch (only debugging messages changed).
Patch should not cause any problems, only real change is
removing LCK_LOCAL bit from lock type flag, it is never used there.
(LCK_LOCAL is part arg[1] bits anyway.)
(This affects only cluster locking because only cluster
locking module set LCK_PRE_MEMLOCK.)
With currect code you get
# vgchange -a n
Internal error: _memlock_count has dropped below 0.
when using cluster locking.
It is caused by _unlock_memory calls here
if ((flags & (LCK_SCOPE_MASK | LCK_TYPE_MASK)) == LCK_LV_RESUME)
memlock_dec();
Unfortunately it is also (wrongly) called in immediate unlock
(when LCK_HOLD is not set) from lock_vol
(LCK_UNLOCK is misinterpreted as LCK_LV_RESUME).
Avoid this by comparing original flags and provide memlock
code type of operation (suspend/resume).
Add a new constraint that vgname locks must be obtained in
alphabetical order. At this point, we have test coverage for
the 3 commands affected - vgsplit, vgmerge, and vgrename.
Tests have been updated to cover these commands.
Going forward any command or library call that must obtain
more than one vgname lock must do so in alphabetical order.
Future patches will update lvm2app to enforce this ordering.
Author: Dave Wysochanski <dwysocha@redhat.com>
We provide a lock type that behaves like no_locking, but is not
clustered. Moreover, it also forbids any write locks. This magically (and
consistently) prevents use of clustered VGs, or changing local VGs with
--ignorelockingfailure. As a bonus, we can remove the special hacks in a few
places. Of course, people looking for trouble can always set their locking_type
to 0 to override.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
As a simplification to the tools and further liblvm, this patch pushes
the setting of NON_BLOCKING lock flag inside the lock_vol() call.
The policy we set is if any existing VGs are currently locked, we
set the NON_BLOCKING flag.
Should be no functional change.
Run backup of metadata on remote nodes in the
same place like local node - when calling backup().
Introduce backup_locally() which calls only
local backup if needed.
Remote backup is now trigerred by LCK_VG_BACKUP flag
combination (special VG lock).
This lock type will call check_current_backup()
(including backup_locally() call) and updates
metadata on all nodes.
(Patch fixes non-functional remote backup,
current call during VG lock never triggers.)
Since now, all code reading volume group is responsible for releasing
the memory allocated by calling vg_release(vg).
(For simplicity of use, vg_releae can be called for vg == NULL,
the same logic like free(NULL)).
Also providing simple macro for unlocking & releasing in one step,
tools usualy uses this approach.
The global memory pool (cmd->mem) should be used only for global
physical volume operations.
This patch have to be applied with all subsequent patches to complete
memory pool per vg logic.
Using separate memory pool has quite bit memory saving impact when
using large VGs, this is mainly needed when we have to use
preallocated and locked memory (and should not overflow from that
memory space).
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
