IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the resume of preloaded node fails, do not leave such
node in the table - since it may not be easy to detach such
node later when the node is i.e. internal.
i.e. failing activation of the thin pool with mismatching
chunk size may leave -tpool device in the table, which
could have been then removed only by dmsetup command.
Setting this environment variable will cause a full fallback
to old direct node and symlink management in libdevmapper and lvm2.
It means:
- disabling udev synchronization
(--noudevsync in dmsetup and --noudevsync + activation/udev_sync=0
lvm2 config)
- disabling dm and any subsystem related udev rules
(--noudevrules in dmsetup and activation/udev_rules=0 lvm2 config)
- management of nodes/symlinks under /dev directly by libdevmapper/lvm2
(--verifyudev in dmsetup and activation/verify_udev_operations=1
lvm2 config)
- not obtaining any device list from udev database
(devices/obtain_device_list_from_udev=0 lvm2 config)
Note: we could set all of these before - there's no functional change!
However the DM_DISABLE_UDEV environment variable is a nice shortcut
to make it easier for libdevmapper users so that one can switch off all
of the udev management off at one go directly on the command line,
without a need to modify any source or add any extra switches.
cookie_set variable found in the struct dm_task should be always
set to 1 after dm_task_set_cookie_call, even if udev_sync is disabled
as the cookie itself carries synchronization informations *as well as*
extra flags to control other aspects of udev support.
For example, one could disable the synchronization itself, but still
direct the libdm code to disable library fallback via
DM_UDEV_DISABLE_LIBRARY_FALLBACK flag. These extra flags still need
to be carried out!
A concrete example:
$ dmsetup create test --table "0 1 zero" --noudevsync
This disables synchronization with udev. As the --verifyudev option is
not used, we don't want to do any corrections. In other words, we
need DM_UDEV_DISABLE_LIBRARY_FALLBACK flag to be used. However,
with --noudevsync this was not the case - the flag was ignored!
This patch fixes the case when noudevsync is used but there are still
some extra flags passed within the cookie flag part. The synchronization
part of the cookie stays zero (which is ok as dm_udev_wait call on such a
cookie is simply a NOOP).
Reset counter after thin pool resize failure.
If the pool goes above threshold, support unmounting
of all thin volumes if the lvextend fails to avoid
overfilling of the pool.
Patch clears the flag if thin pool is stacked over mirror.
Since thin pool could be used to stack device over mirrors,
it needs resume properly i.e. mirrors with corelog which are otherwise
unconditionally skipped (for pvmove functionality).
If we were defining a section (which is a node without a value) and
the value was created automatically on dm_config_create_node call,
we were wasting resources as the next step after creating the config
node itself was assigning NULL for the node's value.
The dm_config_node_create + dm_config_create_value sequence should be
used instead for settings and dm_config_node_create alone for sections.
The majority of the code already used the correct sequence. Though
with dm_config_node_create fn creating the value as well, the pool
memory was being trashed this way.
This patch removes the node value initialization on dm_config_create_node
fn call and keeps it for the direct dm_config_create_value fn call.
A regression introduced in 2.02.89 (11e520256b)
caused the lvm dumpconfig <node> to print out
the node as well as its subsequent siblings.
The information about "only_one" mode got lost.
Before this patch (just an example node):
# lvm dumpconfig global/use_lvmetad
use_lvmetad=1
thin_check_executable="/usr/sbin/thin_check"
thin_check_options="-q"
(...all nodes to the end of the section)
With this patch applied:
# lvm dumpconfig global/use_lvmetad
use_lvmetad=1
Remove executable path detection in udev rules and use sbindir that
is configured, but still provide the original functionality by means
of 'configure --enable-udev-rule-exec-detection'.
Normally, the exec path for the tools called in udev rules should
not differ from the sbindir used, however, there are cases this is
necessary. For example different environments could be assembled
in a way that these path differ for some reason (distribution installer,
initrd ...).
This functionality is kept for compatibility only. Any environment
moving the binaries around and using different paths should be fixed
eventually!
There were several hard-coded values for run directory around the code.
Also, some tools are DM specific only, others are LVM specific and there
was no distinction made here before. With this patch applied, we have
this cleaned up a bit (subsystem in brackets, defaults in parentheses):
[common] configurable PID_DIR (/var/run)
lvm [lvm] configurable RUN_DIR (/var/run/lvm)
configurable locking dir (/var/lock/lvm)
clvmd [lvm] configurable pid file (PID_DIR/clvmd.pid)
socket (RUN_DIR/clvmd.sock)
lvmetad [lvm] configurable pid file (PID_DIR/lvmetad.pid)
socket (RUN_DIR/lvmetad.socket)
dm [dm] configurable DM_RUN_DIR (/var/run)
cmirrord [dm] configurable pid file (PID_DIR/cmirrord.pid)
dmeventd [dm] configurable pid file (PID_DIR/dmeventd.pid)
server fifo (DM_RUN_DIR/dmeventd-server)
client fifo (DM_RUN_DIR/dmeventd-client)
The changes briefly:
- added configure --with-default-pid-dir
- added configure --with-default-dm-run-dir
- added configure --with-lvmetad-pidfile
- by default, using one common pid directory for everything
(only lvmetad was not following this before)
With latest changes in the udev, some deprecated functions were removed
from libudev amongst which there was the "udev_get_dev_path" function
we used to compare a device directory used in udev and directore set in
libdevmapper. The "/dev" is hardcoded in udev now (udev version >= 183).
Amongst other changes and from packager's point of view, it's also
important to note that the libudev development library ("libudev-devel")
could now be a part of the systemd development library ("systemd-devel")
because of the udev + systemd merge.
In some occasional case dmevent restart was experiencing problems
with obtaining pid lockfile. So this patch tries to send several more kill
message until daemon kills itself so there is would reponse.
With this small loop the restart seems to work reliable,
although the loopsize and usleep are just randomly picked for now.
Just to make it clearer since there is the "dmsetup info -c -o blkdevname"
as well that shows the "block device name for this mapping", having a
"BlkDevName" header on output.
It's a bit confusing then if the "dmsetup info -c -o devs_used,blkdevs_used"
is named with a plural "DevNames"/"BlkDevNames" but at the same time having
a totally different meaning than the singular form "BlkDevName".
DevNames --> DevNamesUsed
BlkDevNames --> BlkDevNamesUsed
...makes it much more comprehensible.
LISTEN_PID and LISTEN_FDS environment variables are defined only during systemd
"start" action. But we still need to know whether we're activated during
"reload" action as well - we use the reload action to call "dmeventd -R"/"lvmetad -R"
for statefull daemon restart. We can't use normal "restart" as that is simply
composed of "stop" and "start" and we would lose any state the daemon has.
Auto mode can't deal with multiple mangled names. We can do that while working
in hex mode, but in auto mode, this would lead to device name ambiguity.
Be more strict when unmangling names on ioctl return - require the name to be
properly mangled in 'auto' and 'hex' mode. There really should not be any
blacklisted character since the names should be renamed already (by means of
renaming it directly or running 'dmsetup mangle' for automatic rename).
Avoid using NULL pointers from udev. It seems like some older versions of udev
were improperly returning NULL in some case, so do not silently break here,
and give at least a warning to the user.
