IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If lvmlockd in cluster is killed accidently or any other reason, the
lock resources will become orphaned in the VG lockspace. When the
cluster manager tries to restart this daemon, the LVs will probably
become inactive because of resource schedule policy and thus the lock
resouce will be omited during the adoption process. This patch will
try to purge the lock resources left in previous lockspace, so the
following actions can work again.
To allow the IDM locking scheme be used by users, this patch hooks the
IDM wrapper; it also introducs a new locking type "idm" and we can use
it for global lock with option '-g idm'.
To support IDM locking type, the main change in the data structure is to
add pvs path arrary. The pvs list is transferred from the lvm commands,
when lvmlockd core layer receives message, it extracts the message with
the keyword "path[idx]". Finally, the pv list will pass to IDM lock
manager as the target drives for sending IDM SCSI commands.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Alongside the existed locking schemes of DLM and sanlock, this patch is
to introduce new locking scheme: In-Drive-Mutex (IDM).
With the IDM support in the drive, the locks are resident in the drive,
thus, the locking lease is maintained in a central place: the drive
firmware. We can consider this is a typical client-server model,
every host (or node) in the server cluster launches the request for
leasing mutex to a drive firmware, the drive firmware works as an
arbitrator to grant the mutex to a requester and it can reject other
applicants if the mutex has been acquired. To satisfy the LVM
activation for different modes, IDM supports two locking modes:
exclusive and shareable.
Every IDM is identified with two IDs, one is the host ID and another is
the resource ID. The resource ID is a unique identifier for what the
resource it's protected, in the integration with lvmlockd, the resource
ID is combined with VG's UUID and LV's UUID; for the global locking,
the bytes in resource ID are all zeros, and for the VG locking, the
LV's UUID is set as zero. Every host can generate a random UUID and
use it as the host ID for the SCSI command, this ID is used to clarify
the ownership for mutex.
For easily invoking the IDM commands to drive, like other locking
scheme (e.g. sanlock), a daemon program named IDM lock manager is
created, so the detailed IDM SCSI commands are encapsulated in the
daemon, and lvmlockd uses the wrapper APIs to communicate with the
daemon program.
This patch introduces the IDM locking wrapper layer, it forwards the
locking requests from lvmlockd to the IDM lock manager, and returns the
result from drives' responding.
One thing should be mentioned is the IDM's LVB. IDM supports LVB to max
7 bytes when stores into the drive, the most significant byte of 8 bytes
is reserved for control bits. For this reason, the patch maps the
timestamp in macrosecond unit with its cached LVB, essentially, if any
timestamp was updated by other nodes, that means the local LVB is
invalidate. When the timestamp is stored into drive's LVB, it's
possbile to cause time-going-backwards issue, which is introduced by the
time precision or missing synchronization acrossing over multiple nodes.
So the IDM wrapper fixes up the timestamp by increment 1 to the latest
value and write back into drive.
Currently LVB is used to track VG changes and its purpose is to notify
lvmetad cache invalidation when detects any metadata has been altered;
but lvmetad is not used anymore for caching metadata, LVB doesn't
really work. It's possible that the LVB functionality could be useful
again in the future, so let's enable it for IDM in the first place.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Switch remaining zero sized struct to flexible arrays to be C99
complient.
These simple rules should apply:
- The incomplete array type must be the last element within the structure.
- There cannot be an array of structures that contain a flexible array member.
- Structures that contain a flexible array member cannot be used as a member of another structure.
- The structure must contain at least one named member in addition to the flexible array member.
Although some of the code pieces should be still improved.
The lock adopt feature was disabled since it had used
lvmetad as a source of info. This replaces the lvmetad
info with a local file and enables the adopt feature again
(enabled with lvmlockd --adopt 1).
When lvextend extends an LV that is active with a shared
lock, use this as a signal that other hosts may also have
the LV active, with gfs2 mounted, and should have the LV
refreshed to reflect the new size. Use the libdlmcontrol
run api, which uses dlm_controld/corosync to run an
lvchange --refresh command on other cluster nodes.
When an LV is active with a shared lock, a command can be
run to change the LV with --lockopt skiplv (to override the
exclusive lock the command ordinarily requires which is not
compatible with the outstanding shared lock.)
In this case, other commands may have the LV active and may
need to refresh the LV, so print warning stating this.
The choice about sector size and lease align size is
now made by the sanlock user, in this case lvmlockd.
This will allow lvmlockd to use other lease sizes in
the future. This also prevents breakage if hosts
report different sector sizes, or the sector size
reported by a device changes.
If the VG holding the global lock is removed, we can indicate
that as the reason for not being able to acquire the global
lock in subsequent error messages, and can suggest enabling
the global lock in another VG. (This helpful error message
will go away if the global lock is enabled in another VG,
or if lvmlockd is restarted.)
If lvmlockd acquires an lv lock for a command, but the
command exits before the reply, then the command has
not activated the lv and lvmlockd should unlock it.
This only applies when the lv was not already locked.
(There will always be a chance that the lv lock is held
while the lv is not active, i.e. if the command fails in
the small window between getting the lv lock and before
doing the activation. In that case, rerunning the
activation command corrects the inconsistency.)
This commit helps by automatically clearing the
inconsistency (lv locked by not activated) in the most
common case when the lv lock operation is slow to
complete and the command is canceled by the user.
This commit also adds and cleans up references to the
client id in a bunch of log messages, which is useful
to follow processing on each independent lock request.
This applies the same rule/logic to dlm VGs that has always
existed for sanlock VGs. Allowing a dlm VG to be removed
while its lockspace was still running on other hosts largely
worked, but there were difficult problems if another VG with
the same name was recreated. Forcing the VG lockspace to
be stopped, gives both sanlock and dlm VGs the same behavior.
The dlm will often lose the lvb content, so we need to
check quite a few possibilities for lvb values that
were not being checked before.
Refactoring was required to pass the entire lvb value
back to the core code instead of the single value.
The only functional change should be detecting new
lvb states where metadata is now invalidated where
it wasn't before.
When an action is created by lvmlockd for itself,
there is no client to send the result to. Add
the NO_CLIENT flag to the action to skip sending
the result to a client.
Remove the optimization/shortcut for starting the dlm global
lockspace when it was already running.
Reenable automatically starting the dlm global lockspace
when a command attempts to use it and it's not yet started.
This had become disabled at some point.
lvmlockd would fail to recognize that the global lockspace
failed to start if the dlm wasn't running, so future attempts
to start the dlm global lockspace would do nothing, thinking
it was already running.
This was only used to return two flags indicating specific
reasons for a lock failure so that a more specific error
message could be printed by the command (lockspace had been
stopped, or lockspace had an error starting.)
Remove the list, given its limited usefulness, the fact it
would easily become inaccurate, and the fact it was causing
misleading error messages. The error conditions it was meant
to help could be reported differently.
This makes lvmlockd removal steps for dlm VGs closely match
sanlock VGs. Because dlm lockspaces are not required to be
stopped on all hosts before vgremove, there is an extra bit
for dlm lockspaces, where a flag is set in the VG lock lvb
indicating that the VG was removed. If other hosts happen
to use the VG lock they will see this flag and stop their
lockspace.
This adds the infrastructure, code paths, error reporting,
etc. to handle storage errors, or storage loss, under the
sanlock leases in a VG that is being used. The loss of
storage means sanlock cannot renew its leases, which means
that the host needs to stop using the shared VG before its
leases expire.
This still requires manually shutting down a VG that has
lost lease storage, e.g. unmounting file systems,
deactivating LVs in the VG. The next step is to
automatically use a command like blkdeactivate to do that.
The dlm global lockspace is automatically added when the
first dlm VG lockspace is added. Reverse this by removing
the dlm global lockspace after the last dlm VG lockspace
is removed. (Remove old non-working code that did this
based on an old command that could explicitly add/remove
the dlm global lockspace.)
When there are duplicate global locks, check if the gl
is still enabled each time a gl or vg lock is acquired
in the lockspace. Once one of the duplicates is disabled,
then other hosts will recognize that the issue is resolved
without needing to restart the lockspaces.
When lvmlockd is compiled without support for one of the
lock managers (sanlock or dlm), and a command tries to use
one of them, explain that in the error message.
