IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If we fail to create a region during dm_stats_create_regions_from_fd(),
we must remove all regions that were created to do this to date. This
needs to loop over the table of region_id values that were populated
by _stats_create_file_regions() before the error.
The code for this failure case in the out_remove branch incorrectly
uses the table index as the region_id:
for (--i; i != DM_STATS_REGION_NOT_PRESENT; i--) {
if (!dm_stats_delete_region(dms, i))
log_error("Could not delete region " FMTu64 ".", i);
}
This causes the cleanup code to delete a completely unrelated set
of regions (since the index here will always be nr_regions..0).
Fix it to pass the actual region_id stored in regions[i] instead.
Fix a silly bug in dm_stats_delete_region() that hugely inflates
runtimes when deleting a large number of regions.
For ~50,000 regions this change reduces the runtime from 98s to
6s on my test systems (a ~93% reduction).
The bug exists because dm_stats_delete_region() applies a truth
test to the return value of dm_stats_get_nr_areas(); this is
never correct usage - it will walk the entire region table and
calculate area counts for each region (which is roughly O(n^2)
in the number of regions, as dm_stats_delete_region() is being
called inside a region walk).
Although the individual area calculation is not that costly,
uselessly running anything 2,500,000,000 times over gets a bit
slow.
A much cheaper test (which is always true if the areas check is
true) is to just test dm_stats_get_nr_regions() or dms->regions;
if either is true it implies at least one area exists.
Old:
Performance counter stats for 'dmstats delete --allregions --alldevices':
98117.791458 task-clock (msec) # 1.000 CPUs utilized
127 context-switches # 0.001 K/sec
3 cpu-migrations # 0.000 K/sec
6,631 page-faults # 0.068 K/sec
307,711,724,562 cycles # 3.136 GHz
544,762,959,577 instructions # 1.77 insn per cycle
84,287,824,115 branches # 859.047 M/sec
2,538,875 branch-misses # 0.00% of all branches
98.119578733 seconds time elapsed
New:
Performance counter stats for 'dmstats delete --allregions --alldevices':
6427.251074 task-clock (msec) # 1.000 CPUs utilized
6 context-switches # 0.001 K/sec
0 cpu-migrations # 0.000 K/sec
6,634 page-faults # 0.001 M/sec
21,613,018,724 cycles # 3.363 GHz
3,794,755,445 instructions # 0.18 insn per cycle
852,974,026 branches # 132.712 M/sec
808,625 branch-misses # 0.09% of all branches
6.428953647 seconds time elapsed
There are two possible errors in _dm_stats_populate_region():
* No region struct in dms->regions[region_id]
* Failure to parse data from @stats_print
These have very different causes: the first occurs where a client
program is populating one region at a time (region_id is a single
region identifier), and has not previously called dm_stats_list()
to dimension the region tables; this is an API usage error.
The second occurs when either we read unparseable data from the
kernel (kernel bug), or where various resource allocations fail.
Separate these two cases out and log separate messages for each
(allocation failures in the path already have their own distinct
message), since the "failed to parse.." message in the un-listed
handle case is confusing and misleading.
Translate log_info() into log_very_verbose() which is macro
supposed to be used by our code.
log_info() is internal macro with eventually some 'symbolic' meaning
in syslogging daemons.
Instead of compiling 2 log call for 2 different logging functions,
and runtime decide which version to use - use only 'newer' function
and when user sets his own OLD dm_log logging translate it runtime
for old arg list set.
The positive part is - we get shorter generated library,
on the negative part this translation means, we always have evaluate
all args and print the message into local on stack buffer, before
we can pass this buffer to the users' logging function with proper
expected parameters (and such function may later decide to discard
logging based on message level so whole printing was unnecessary).
Introduce macros:
log_level(), log_stderr(), log_once(), log_bypass_report()
For easier and more consisten way how to 'decoder' bits
of info from passed 'level'.
This patch fixes potential problem when 'level' of message
might not have always masked right bits.
The dm_stats_delete_region() call removes a region from the bound
device, and, if the region is grouped, from the group leader
group descriptor stored in aux_data.
To do this requires a listed handle: previous versions of the
library do not since no dependencies exist between regions without
grouping.
This leads to strange behaviour when a command built against an old
version of the library is used with one supporting groups. Deleting
a region with dmstats succeeds, but logs errors:
# dmstats list
Name RgID RgSta RgSiz #Areas ArSize ProgID
vg_hex-root 0 0 1.00g 1 1.00g dmstats
vg_hex-root 1 1.00g 1.00g 1 1.00g dmstats
vg_hex-root 2 2.00g 1.00g 1 1.00g dmstats
# dmstats delete --regionid 2 vg_hex/root
Region ID 2 does not exist
Could not delete statistics region.
Command failed
# dmstats list
Name RgID RgSta RgSiz #Areas ArSize ProgID
vg_hex-root 0 0 1.00g 1 1.00g dmstats
vg_hex-root 1 1.00g 1.00g 1 1.00g dmstats
This happens because the call to dm_stats_delete_region() is inside
a dm_stats_walk_*() iterator: upon entry to the call, the iterator
is at its end conditions and about to terminate. Due to the call to
dm_stats_list() inside the function, it returns with an iterator at
the beginning of a walk and performs a further iteration before
exiting. This final loop makes a further attempt to delete the
(already deleted) region, leading to the confusing error messages.
The current dmsetup.c handles DR_STATS and DR_STATS_META reports
separately in _display_info_cols(), meaning that the stats walk
functions are never called for these report types.
Versions before v2.02.159 have a loop using dm_stats_walk_do() and
dm_stats_walk_while(), that executes once for non-stats reports,
and once per region, or area, for DR_STATS/DR_STATS_META reports.
This older behaviour relies on the documented behaviour that the
walk functions will accept a NULL pointer as the struct dm_stats*
argument.
This was broken by commit f1f2df7b: the NULL test on dms and
dms->regions were incorrectly moved from the dm_stats_walk_end()
wrapper to the internal '_stats_walk_end()' helper.
Since the pointer is dereferenced in between these points, using
an older dmsetup with current libdm results in a segfault when
running a non-stats report:
# dmsetup info -c vg00/lvol0
Segmentation fault (core dumped)
Restore the NULL checks to the wrapper function as intended.
The dm_report_group_output_and_pop_all calls dm_report_output and
dm_report_group_pop for all the items that are currently in report
group. This is just a shortcut that makes it easier to output and
pop group's content so the group handle can be reused again without
a need to initialize and configure it again.
The functionality of dm_report_group_output_and_pop_all is the
same as dm_report_destroy but without destroying the report group
handle.
This patch moves printing of starting '{' character for JSON output up
untili it's known there's any further output following - either the
content or ending '}' character.
Also, remove unnecessary switch for different report group types and
calling individual functions to handle dm_report_group_create as that
code is shared for all existing types at the moment.
Calling dm_report_destroy_rows makes it possible to destroy any report
content we have but at the same time it doesn't destroy the report
handle itself, thus it's possible to reuse that handle again for new
report content.
Functionally, this is the same as calling dm_report_output with the
report handle but omitting the output iself. This functionality may
be useful if we, for whatever reason, need to discard the report
content and start a fresh new one but with the same report configuration
and initialization and thus we can just reuse the existing handle.
Support aggregate group and region histograms by allocating a new
histogram from the pool and populating it with a sum of the histogram
data for the areas contained in the region or group.
To avoid repeatedly summing the same histogram data, cache the pointer
in the group and regions structs for subsequent access. The aggregate
histograms are allocated from the same pool as the area histograms in
the corresponding handle and will be discarded at each list or populate
operation.
Add a call to create dmstats regions that correspond to the extents
present in a file descriptor open on a file in a local file system.
The file must reside on a file system type that correctly supports
physical extent location data in the FIEMAP ioctl.
Regions are optionally placed into a group with a user-defined alias.
File systems that do not support physical offsets in FIEMAP (btrfs
currently) are detected via fstatfs() - although attempting to map
a --filemap group on btrfs will fail anyway with the generic error
"Not on a device-mapper device" this is confusing; the file system
mount is on a device-mapper device, but btrfs' volume layer masks
this in the returned st_dev field since the returned logical file
extents may span multiple physical devices.
The function _stats_remove_region_id_from_group() incorecctly set
the group_id to DM_STATS_GROUP_NOT_PRESENT _before_ the call to
_stats_group_destroy(). This will cause the destroy function to
return immediately without doing anything:
339 static void _stats_group_destroy(struct dm_stats_group *group)
340 {
341 if (!_stats_group_present(group))
342 return;
Invalidating the ID in _stats_region_region_id_from_group() is
redundant anyway; it is rightly done as the last operation in
_stats_group_destroy (and it is not possible for anything to see
the old value between the two calls).
Remove the change to group_id to ensure that the alias and bitset
resources are correctly freed.
The call to dm_stats_walk_start() before the do statement makes
dm_stats_walk_do() behave inconsistently depending on context;
wrap them in an additional do { } while (0) so that the macro
always expands to a valid statement.
If after extracting stats arguments and group tags nothing remains
of aux_data but '-' set the region->aux_data field to the empty
string to match behaviour for non-grouped regions.
Although not harmful do not allow a group containing regions with
histograms since it is not currently possible to present histogram
data aggregated for the group.
Although a non-zero value for the number of ticks spent doing IO
should imply a non-zero number of IOs in the interval test for
this explicitly to avoid a divide-by-zero in the event of bad
counter data.
It's possible for interval_ns to be zero if the interval is not
set or the clock is misconfigured. Test for this before using the
value as the divisor in the utilisation calculation.
Walk flags are ULL constants; cast the result to a uint64_t before
logging with a FMTx64 format specifier to avoid a compiler warning:
warning: format ‘%lx’ expects argument of type ‘long unsigned int’,
but argument 5 has type ‘long long unsigned int’
