IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For snapshot, prepare whole command in front into private buffer.
Add also some missing '\n' for syslog messages.
For raid and mirror only convert creation of command line string.
This should avoid any unbound growth of mempool for dm_split_names.
Fix some minor outstading issue from thin plugin introduction -
Call dmeventd_lvm2_exit() in failpath for registration.
Add some missing '\n' in syslog messages.
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume. The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group. The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
udev may also need to be disabled if you didn't build it statically too.
dmeventd.static could be fixed with some more work but I don't really see the
point: without dlopen() it's useless, and if you have dlopen(), why not support
normal shared libraries too?
that we can also test clustered volume groups (vgcreate -c y) in the test
suite. Unfortunately we can't make this the testing default since cluster
mirrors require further infrastructure, and snapshots probably don't work at
all. I'll eventually add a few test cases that create clustered VGs
specifically.
monitoring state of the logical volumes they are currently acting on.
Until now, every time a logical volume has been changed by a dmeventd plugin,
this plugin would have called back to dmeventd through the external FIFO
mechanism. I am fairly sure this was superfluous, inefficient and possibly even
dangerous.
Version 2 of the userspace log protocol accepts return information during the
DM_ULOG_CTR exchange. The return information contains the name of the log
device that is being used (if there is one). The kernel can then register the
device via 'dm_get_device'. Amoung other things, this allows for userspace to
assemble a correct dependency tree of devices - critical for LVM handling of
suspend/resume calls.
Also, update dm-log-userspace.h to match the kernel header associated with
this protocol change. (Includes a version inc.)
Code here is using thread write protected variable without locking.
So add locking, for proper synchronization and a FIXME, since the
code needs closer look.
Barrier is supposed to be used in situation like this
and replace tricky mutex usage, where mutex has been unlocked
by a different thread than the locking thread.
Usage of thread unprotected init_test is not correct and needs probably lvm lock
since it part of lvm library. Current implementation may probably fail with
test mode and actually create something unexpectedly (and vice versa).
Since default thread stack size is around 8MB and clvmd creates for now thread
for message, clvmd may easily reach multi GB size of in-memory locked pages
(runs with mlockall()).
This patch significantly reduces memory usage to just tens of MB,
and now different reasons are the cause of server overloading.
Now we are running out of free file descriptors mostly.
Replace usleep with pthread condition to increase speed testing
(for simplicity just 1 condition for all locks).
Use thread mutex also for unlock resource (so it wakes up awaiting
threads)
Better check some error states and return error in fail case with
unlocked mutex.
Since execve passed only NULL as environ, we had lost all environment vars on
restart - thus actually running 'different' clvmd then the one at start.
Preserving environ allows to restart clvmd with the same settings
(i.e. LD_LIBRARY_PATH)
Add test for second restart.
Add named cluster_ops to easily learn the name of the active cluster manager,
so we are able to restart singlenode manager in testing.
Add simple test for clvmd -S (restart) and -R (refresh)
(though it needs some extensions).
Next iteration for better fit of lvmetad compilation.
Move build of libdaemon.a into common subdir Makefile.
libdaemon.a is device-mapper target.
Build and install lvmetad as lvm2 target.
Read 2 environmental vars to learn about overide position for
CLVMD and LVM binaries.
We support LVM_BINARY in other script - and this way we could easily
test restart in our test-suite.
Bugfix:
Add (most probably unfinished) support for -E arg with list of exclusive
locks. (During clvmd restart all exclusive locks would have been lost and
in fact, if there would have been an exclusive lock, usage text would be
printed and clvmd exits.)
Instead of parsing list options multiple times every time some lock UUID is
checked - put them straight into the hash table - make the code easier to
understand as well.
Remove was_ex_lock() function (replaced with dm_hash_lookup()).
Swap return value for get_initial_state() (1 means success).
Update man pages and usage info for -E option.
Patch fixes Clang warnings about possible access via lv_name NULL pointer.
Replaces allocation of memory (strdup) with just pointer assignment
(since execve is being called anyway).
Checks for !*lv_name only when lv_name is defined.
(and as I'm not quite sure what state this really is - putting a FIXME
around - as this rather looks suspicios ??).
Add debug print of passed clvmd args.
(since data in statbuf are invalid).
Check whether sysconf managed to find _SC_PAGESIZE.
Report at least debug warning about failing unlink
(logging scheme here seems to be a different then in lvm).
Duplicate terminal FDs and use similar code as is made in clvmd
and cleanup warns about missing open/close tests.
FIXME: Looks like we already have 3 instancies of the same code in lvm repo.
daemon/common code in a single libdaemon.a, which is completely private. This
is currently linked into the lvmetad binary, and will be linked into LVM (the
client part, since static linking only picks up only symbols that are actually
used). I have also added --enable/disable-lvmetad to ./configure; although the
current default is off, I expect this to be flipped to on shortly. There's no
LVM-side support yet, but when there is, even when built, it'll still need to
be enabled by an lvm.conf option.
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
Systemd preloads file descriptors for us and passes them in for
newly spawned daemon when using on-demand fifo (or socket)
based activation.
This patch adds checks for file descriptors preloaded by
systemd and uses them instead of opening the FIFOs again
to properly support on-demand FIFO-based activation.
(We'll change FIFOs to sockets soon - but still this
part of the code will stay almost the same.)
The filename to adjust the oom score was changed in 2.6.36.
We should use oom_score_adj instead of oom_adj (which is still
there under /proc, but it's scheduled for removal in August 2012).
New oom_score_adj uses a range from -1000 (OOM_SCORE_ADJ_MIN,
disable oom killing) to 1000 (OOM_SCORE_ADJ_MAX).
very reasonable amount of parallel access, although the hash tables may become
a point of contention under heavy loads. Nevertheless, there should be orders
of magnitude less contention on the hash table locks than we currently have on
block device scanning.
are affected by the move. (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.
The current fix was selected so as to minimise the testing surface. I
hope eventually to replace it with a cleaner one that extends the
deptree code.
Some lvconvert scenarios still suffer from related problems.
allocates these buffers in such way it adds memory page for each such buffer
and size of unlock memory check will mismatch by 1 or 2 pages.
This happens when we print or read lines without '\n' so these buffers are
used. To avoid this extra allocation, use setvbuf to set these bufffers ahead.
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
'a small step' towards cleaner shutdown sequence.
Normally clvmd doens't care about unreleased memory on exit -
but for valgrind testing it's better to have them cleaned all.
So - few things are left on exit path - this patch starts to remove
just some of them.
1. lvm_thread_fs is made as a thread which could be joined on exit()
2. memory allocated to local_clien_head list is released.
(this part is somewhat more complex if the proper reaction is
needed - and as it requires some heavier code moving - it will
be resolved later.
Fix 2 more functions sending cluster messages to avoid passing uninitilised bytes
and compensate 1 extra byte attached to the message from the clvm_header.args[1]
member variable.
Fixing few issues:
struct clvm_header contains 'char args[1]' - so adding '+ 1' here
for message length calculation is 1 byte off.
Message with last byte uninitialized is then passed to write function.
Update also related arglen.
Initialise xid and clintid to 0.
Memory allocation is checked for NULL
- returned char not needed to be explicitly const
- warn if pipe() fails in clvmd (more fixes here needed for error paths...)
- assign (and ignore) read() output in drain buffer
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
New strategy for memory locking to decrease the number of call to
to un/lock memory when processing critical lvm functions.
Introducing functions for critical section.
Inside the critical section - memory is always locked.
When leaving the critical section, the memory stays locked
until memlock_unlock() is called - this happens with
sync_local_dev_names() and sync_dev_names() function call.
memlock_reset() is needed to reset locking numbers after fork
(polldaemon).
The patch itself is mostly rename:
memlock_inc -> critical_section_inc
memlock_dec -> critical_section_dec
memlock -> critical_section
Daemons (clmvd, dmevent) are using memlock_daemon_inc&dec
(mlockall()) thus they will never release or relock memory they've
already locked memory.
Macros sync_local_dev_names() and sync_dev_names() are functions.
It's better for debugging - and also we do not need to add memlock.h
to locking.h header (for memlock_unlock() prototyp).
results in clvmd deadlock
When a logical volume is activated exclusively in a cluster, the
local (non-cluster-aware) target is used. However, when creating
a snapshot on the exclusive LV, the resulting suspend/resume fails
to load the appropriate device-mapper table - instead loading the
cluster-aware target.
This patch adds an 'exclusive' parameter to the pertinent resume
functions to allow for the right target type to be loaded.
activated.
In order to achieve this, we need to be able to query whether
the origin is active exclusively (a condition of being able to
add an exclusive snapshot).
Once we are able to query the exclusive activation of an LV, we
can safely create/activate the snapshot.
A change to 'hold_lock' was also made so that a request to aquire
a WRITE lock did not replace an EX lock, which is already a form
of write lock.
Remove temporaly added fs_unlock() calls to fix clmvd usablity.
Now when the message passing is properly working - they are no longer needed.
Simplify no_locking check for VG unlock - as message is always send
for all targets - clustered & non-clustered.
Thanks to CLVMD_CMD_SYNC_NAMES propagation fix the message passing started
to work. So starts to send a message before the VG is unlocked.
Removing also implicit sync in VG unlock from clmvd as now the message
is delievered and processed in do_command().
Also add support for this new message into external locking
and mask this event from further processing.