1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

336 Commits

Author SHA1 Message Date
Zdenek Kabelac
6612d8dd5e vdo: enhance activation with layer -vpool
Enhance 'activation' experience for VDO pool to more closely match
what happens for thin-pools where we do use a 'fake' LV to keep pool
running even when no thinLVs are active. This gives user a choice
whether he want to keep thin-pool running (wihout possibly lenghty
activation/deactivation process)

As we do plan to support multple VDO LVs to be mapped into a single VDO,
we want to give user same experience and 'use-patter' as with thin-pools.

This patch gives option to activate VDO pool only without activating
VDO LV.

Also due to 'fake' layering LV we can protect usage of VDO pool from
command like 'mkfs' which do require exlusive access to the volume,
which is no longer possible.

Note: VDO pool contains 1024 initial sectors as 'empty' header - such
header is also exposed in layered LV (as read-only LV).
For blkid we are indentified as LV with UUID suffix - thus private DM
device of lvm2 - so we do not need to store any extra info in this
header space (aka zero is good enough).
2019-09-17 13:17:19 +02:00
David Teigland
0534cd9cd4 pvscan: disable sleeping and retrying for udev
When systemd is running pvscans, udev may not be
entirely initialized, so the pvscan should not
sleep and retry waiting for udev info.
2019-08-16 14:41:26 -05:00
David Teigland
0f350ba890 remove unused trustcache option 2019-06-11 11:42:49 -05:00
David Teigland
8c87dda195 locking: unify global lock for flock and lockd
There have been two file locks used to protect lvm
"global state": "ORPHANS" and "GLOBAL".

Commands that used the ORPHAN flock in exclusive mode:
  pvcreate, pvremove, vgcreate, vgextend, vgremove,
  vgcfgrestore

Commands that used the ORPHAN flock in shared mode:
  vgimportclone, pvs, pvscan, pvresize, pvmove,
  pvdisplay, pvchange, fullreport

Commands that used the GLOBAL flock in exclusive mode:
  pvchange, pvscan, vgimportclone, vgscan

Commands that used the GLOBAL flock in shared mode:
  pvscan --cache, pvs

The ORPHAN lock covers the important cases of serializing
the use of orphan PVs.  It also partially covers the
reporting of orphan PVs (although not correctly as
explained below.)

The GLOBAL lock doesn't seem to have a clear purpose
(it may have eroded over time.)

Neither lock correctly protects the VG namespace, or
orphan PV properties.

To simplify and correct these issues, the two separate
flocks are combined into the one GLOBAL flock, and this flock
is used from the locking sites that are in place for the
lvmlockd global lock.

The logic behind the lvmlockd (distributed) global lock is
that any command that changes "global state" needs to take
the global lock in ex mode.  Global state in lvm is: the list
of VG names, the set of orphan PVs, and any properties of
orphan PVs.  Reading this global state can use the global lock
in sh mode to ensure it doesn't change while being reported.

The locking of global state now looks like:

lockd_global()
  previously named lockd_gl(), acquires the distributed
  global lock through lvmlockd.  This is unchanged.
  It serializes distributed lvm commands that are changing
  global state.  This is a no-op when lvmlockd is not in use.

lockf_global()
  acquires an flock on a local file.  It serializes local lvm
  commands that are changing global state.

lock_global()
  first calls lockf_global() to acquire the local flock for
  global state, and if this succeeds, it calls lockd_global()
  to acquire the distributed lock for global state.

Replace instances of lockd_gl() with lock_global(), so that the
existing sites for lvmlockd global state locking are now also
used for local file locking of global state.  Remove the previous
file locking calls lock_vol(GLOBAL) and lock_vol(ORPHAN).

The following commands which change global state are now
serialized with the exclusive global flock:

pvchange (of orphan), pvresize (of orphan), pvcreate, pvremove,
vgcreate, vgextend, vgremove, vgreduce, vgrename,
vgcfgrestore, vgimportclone, vgmerge, vgsplit

Commands that use a shared flock to read global state (and will
be serialized against the prior list) are those that use
process_each functions that are based on processing a list of
all VG names, or all PVs.  The list of all VGs or all PVs is
global state and the shared lock prevents those lists from
changing while the command is processing them.

The ORPHAN lock previously attempted to produce an accurate
listing of orphan PVs, but it was only acquired at the end of
the command during the fake vg_read of the fake orphan vg.
This is not when orphan PVs were determined; they were
determined by elimination beforehand by processing all real
VGs, and subtracting the PVs in the real VGs from the list
of all PVs that had been identified during the initial scan.
This is fixed by holding the single global lock in shared mode
while processing all VGs to determine the list of orphan PVs.
2019-04-29 13:01:05 -05:00
David Teigland
dd8d083795 config: add new setting io_memory_size
which defines the amount of memory that lvm will allocate
for bcache.  Increasing this setting is required if it is
smaller than a single copy of VG metadata.
2019-03-04 11:36:21 -06:00
David Teigland
9aea6ae956 logging: add command[pid] and timestamp to file and verbose output
Without this, the output from different commands in a single
log file could not be separated.

Change the default "indent" setting to 0 so that the default
debug output does not include variable spaces in the middle
of debug lines.
2019-02-26 10:03:44 -06:00
Zdenek Kabelac
701ecff0ff lvm: drop usage of dl library
Since lvm no longer supports any dlopen-able plugins
(which in practice was never really usable) drop linking
with -ldl.
2018-12-17 10:36:52 +01:00
Zdenek Kabelac
0b19387dae headers: use configure.h as 1st. header
Ensure configure.h is always 1st. included header.
Maybe we could eventually introduce gcc -include option, but for now
this better uses dependency tracking.

Also move _REENTRANT and _GNU_SOURCE into configure.h so it
doesn't need to be present in various source files.
This ensures consistent compilation of headers like stdio.h since
it may produce different declaration.
2018-12-14 15:09:13 +01:00
Zdenek Kabelac
d8ad73e937 gcc: avoid shadowing use_aio
Function use_aio() is already declared, avoid its shadowing.
lvm-globals.h:59: warning: shadowed declaration is here
2018-12-01 01:07:01 +01:00
David Teigland
ca66d52032 io: use sync io if aio fails
io_setup() for aio may fail if a system has reached the
aio request limit.  In this case, fall back to using
sync io.  Also, lvm use of aio can be disabled entirely
with config setting global/use_aio=0.

The system limit for aio requests can be seen from
  /proc/sys/fs/aio-max-nr

The current usage of aio requests can be seen from
  /proc/sys/fs/aio-nr

The system limit for aio requests can be increased by
setting fs.aio-max-nr using sysctl.

Also add last-byte limit to the sync io code.
2018-11-20 09:13:20 -06:00
Zdenek Kabelac
aff69ecf39 vdo: component activation of VDO data LV
Allow component activation of VDO data LV.
2018-07-09 15:28:35 +02:00
Zdenek Kabelac
a8f84f7801 vdo: introduce segment types and manip functions
Core functionality introducing lvm VDO support.
2018-07-09 15:28:35 +02:00
Zdenek Kabelac
6c84a36b53 utils: add clzll
Check for __builtin_clzll and add wrapper when missing.
2018-06-22 23:37:02 +02:00
David Teigland
328303d4d4 Remove unused device error counting 2018-06-15 14:04:39 -05:00
Joe Thornber
d5da55ed85 device_mapper: remove dbg_malloc.
I wrote dbg_malloc before we had valgrind.  These days there's just
no need.
2018-06-08 13:40:53 +01:00
Joe Thornber
286c1ba336 device_mapper: rename libdevmapper.h -> all.h
I'm paranoid a file will include the global one in /usr/include
by accident.
2018-06-08 12:31:45 +01:00
David Teigland
e6bb780d24 Rework lock-override options and locking_type settings
The last commit related to this was incomplete:
  "Implement lock-override options without locking type"

This is further reworking and reduction of the locking.[ch]
layer which handled all clustering, but is now only used
for file locking.  The "locking types" that this layer
implemented were removed previously, leaving only the
standard file locking.  (Some cluster-related artifacts
remain to be cleared out later.)

Command options to override or modify locking behavior
are reimplemented here without using the locking types.
Also, deprecated locking_type values are recognized,
and implemented as if one of the equivalent override
options was set.

Options that override file locking are:

. --nolocking disables all file locking.

. --readonly grants read lock requests without actually
  taking a file lock, and refuses write lock requests.

. --ignorelockingfailure tries to set up file locks and
  uses them normally if possible.  When not possible, it
  behaves like --readonly, but allows activation.

. --sysinit is the same as ignorelockingfailure.

. global/metadata_read_only acquires actual read file
  locks, and refuses write lock requests.

(Some of these options could probably be deprecated
because they were added as workarounds to various
locking_type behaviors that are now deprecated.)

The locking_type setting now has one valid value: 1 which
refers to standard file locking.  Configs that contain
deprecated values are recognized and still work in
largely the same way:

. 0 disabled all locking, now implemented like --nolocking
  is set.  Allow the nolocking option in all commands.

. 1 is the normal file locking setting and is unchanged.

. 2 was for external locking which was not used, and
  reverts to normal file locking.

. 3 was for cluster/clvm.  This reverts to normal file
  locking, and prints messages about lvmlockd.

. 4 was equivalent to readonly, now implemented like
  --readonly is set.

. 5 disabled all locking, now implemented like
  --nolocking is set.
2018-06-07 16:47:15 -05:00
Joe Thornber
89fdc0b588 Merge branch 'master' into 2018-05-11-fork-libdm 2018-05-16 13:43:02 +01:00
Joe Thornber
ccc35e2647 device-mapper: Fork libdm internally.
The device-mapper directory now holds a copy of libdm source.  At
the moment this code is identical to libdm.  Over time code will
migrate out to appropriate places (see doc/refactoring.txt).

The libdm directory still exists, and contains the source for the
libdevmapper shared library, which we will continue to ship (though
not neccessarily update).

All code using libdm should now use the version in device-mapper.
2018-05-16 13:00:50 +01:00
Joe Thornber
7f97c7ea9a build: Don't generate symlinks in include/ dir
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
2018-05-14 10:30:20 +01:00
David Teigland
bbb8040456 dev_cache: drop open_list
devices are now held open only in bcache,
so drop the dev_cache list of open devices
which is unused.
2018-05-11 12:47:56 -05:00
Joe Thornber
972b535220 build: add -D_FILE_OFFSET_BITS=64
I don't like having this in a common header because it means you end
up including too much and causing unneccessary dependencies.  eg,
lib/misc/lib.h includes libdevmapper.h, internationalisation, and
logging stuff.
2018-05-02 18:40:38 +01:00
David Teigland
c0973e70a5 dev_cache: clean up scan
Pull out all of the twisted logic and simply call dev_cache_scan
at the start of the command prior to label scan.
2018-04-20 11:22:48 -05:00
David Teigland
d9a77e8bb4 lvmcache: simplify metadata cache
The copy of VG metadata stored in lvmcache was not being used
in general.  It pretended to be a generic VG metadata cache,
but was not being used except for clvmd activation.  There
it was used to avoid reading from disk while devices were
suspended, i.e. in resume.

This removes the code that attempted to make this look
like a generic metadata cache, and replaces with with
something narrowly targetted to what it's actually used for.

This is a way of passing the VG from suspend to resume in
clvmd.  Since in the case of clvmd one caller can't simply
pass the same VG to both suspend and resume, suspend needs
to stash the VG somewhere that resume can grab it from.
(resume doesn't want to read it from disk since devices
are suspended.)  The lvmcache vginfo struct is used as a
convenient place to stash the VG to pass it from suspend
to resume, even though it isn't related to the lvmcache
or vginfo.  These suspended_vg* vginfo fields should
not be used or touched anywhere else, they are only to
be used for passing the VG data from suspend to resume
in clvmd.  The VG data being passed between suspend and
resume is never modified, and will only exist in the
brief period between suspend and resume in clvmd.

suspend has both old (current) and new (precommitted)
copies of the VG metadata.  It stashes both of these in
the vginfo prior to suspending devices.  When vg_commit
is successful, it sets a flag in vginfo as before,
signaling the transition from old to new metadata.

resume grabs the VG stashed by suspend.  If the vg_commit
happened, it grabs the new VG, and if the vg_commit didn't
happen it grabs the old VG.  The VG is then used to resume
LVs.

This isolates clvmd-specific code and usage from the
normal lvm vg_read code, making the code simpler and
the behavior easier to verify.

Sequence of operations:

- lv_suspend() has both vg_old and vg_new
  and stashes a copy of each onto the vginfo:
  lvmcache_save_suspended_vg(vg_old);
  lvmcache_save_suspended_vg(vg_new);

- vg_commit() happens, which causes all clvmd
  instances to call lvmcache_commit_metadata(vg).
  A flag is set in the vginfo indicating the
  transition from the old to new VG:
  vginfo->suspended_vg_committed = 1;

- lv_resume() needs either vg_old or vg_new
  to use in resuming LVs.  It doesn't want to
  read the VG from disk since devices are
  suspended, so it gets the VG stashed by
  lv_suspend:
  vg = lvmcache_get_suspended_vg(vgid);

If the vg_commit did not happen, suspended_vg_committed
will not be set, and in this case, lvmcache_get_suspended_vg()
will return the old VG instead of the new VG, and it will
resume LVs based on the old metadata.
2018-04-20 11:22:45 -05:00
Zdenek Kabelac
aa75e181be coverity: drop unneeded header files 2018-03-17 23:33:58 +01:00
Zdenek Kabelac
b6e7a0b490 cleanup: more usage of dm_strncpy
Use existing wrapper function arournd  strncpy + buf[] = 0;
2018-03-06 15:40:34 +01:00
Zdenek Kabelac
3a841515af lvm-string: add function to detect component LV suffix
Add is_component_lvname() function to recognize component LV name.
2017-12-19 15:28:07 +01:00
Zdenek Kabelac
5de9444202 locking: avoid descriptor leak for nonblocking mode
When file-locking mode failed on locking, such description was leaked
(typically not an issue since command usually exists afterwards).
So shirt close() at the end of function and use it in all error paths.

Also make sure, when interrrupt is detected, it's really not holding
lock and returns 0.
2017-08-25 14:12:55 +02:00
Zdenek Kabelac
2c3d9a07cb cleanup: whitespace 2017-07-11 16:26:12 +02:00
Heinz Mauelshagen
a14a8cef2f signals: fix comparison flaw
commit 9a689fb8f0
fixed SIGINT blocking but introduced a comparision
flaw to sigint_restore().

Related: rhbz1440766
2017-04-10 18:41:28 +02:00
Heinz Mauelshagen
9a689fb8f0 signals: fix SIGINT blocking flaw causing inconsistent metadata
SIGINT isn't blocked properly after a sigint_allow(),
sigint_restore() cycle leading to illicit interruptable
metadata updates.  These can leave corrupted metadata behind.

Issues addressed in this commit:

sigint_allow() fails to set _oldmasked[] members properly due
to an offset by one bug on indexing the members of the array.

It bails out prematurely comparing to MAX_SIGINTS causing nesting
depths to be one less than MAX_SIGINTS.  Fix the comparision.

Correct the related comparison flaw in sigint_restore().

Initialize all sig_atomic_t variables consequently.

Resolves: rhbz1440766
2017-04-10 18:16:09 +02:00
Zdenek Kabelac
0844b20f98 coverity: remove unneeded header files 2017-02-11 21:17:27 +01:00
Bryn M. Reeves
107bc13db3 util: add clz() and use __builtin_clz() if available
Add a macro for the clz (count leading zeros) operation.

Use the GCC __builtin_clz() for clz() if it is available and fall
back to a shift based implementation on systems that do not set
HAVE___BUILTIN_CLZ.
2016-12-13 20:41:29 +00:00
Alasdair G Kergon
c27963c566 lib: Move lcm and gcd to lib/misc for wider use. 2016-08-18 14:06:13 +01:00
Peter Rajnoha
06ce9b4e42 log: separate output and make it possible to use given FDs
Currently, the output is separated in 3 parts and each part can go into
a separate and user-defined file descriptor:

  - common output (stdout by default, customizable by LVM_OUT_FD environment variable)
  - error output (stderr by default, customizable by LVM_ERR_FD environment variable)
  - report output (stdout by default, customizable by LVM_REPORT_FD environment variable)

For example, each type of output goes to different output file:

  [0] fedora/~ # export LVM_REPORT_FD=3

  [0] fedora/~ # lvs fedora vg/abc 1>out 2>err 3>report

  [0] fedora/~ # cat out

  [0] fedora/~ # cat err
    Volume group "vg" not found
    Cannot process volume group vg

  [0] fedora/~ # cat report
    LV   VG     Attr       LSize   Layout     Role       CTime
    root fedora -wi-ao----  19.00g linear     public     Wed May 27 2015 08:09:21
    swap fedora -wi-ao---- 500.00m linear     public     Wed May 27 2015 08:09:21

Another example in LVM shell where the report goes to "report" file:

  [0] fedora/~ # export LVM_REPORT_FD=3
  [0] fedora/~ # lvm 3>report

  (in lvm shell)
  lvm> vgs

  (content of "report" file)
  [1] fedora/~ # cat report
    VG     #PV #LV #SN Attr   VSize  VFree
    fedora   1   2   0 wz--n- 19.49g    0

  (in lvm shell)
  lvm> lvs

  (content of "report" file)
  [1] fedora/~ # cat report
    VG     #PV #LV #SN Attr   VSize  VFree
    fedora   1   2   0 wz--n- 19.49g    0
    LV   VG     Attr       LSize   Layout     Role       CTime
    root fedora -wi-ao----  19.00g linear     public     Wed May 27 2015 08:09:21
    swap fedora -wi-ao---- 500.00m linear     public     Wed May 27 2015 08:09:21
2016-08-09 18:24:45 +02:00
Alasdair G Kergon
12925d8b70 string: Add first_substring(). 2016-07-14 14:46:38 +01:00
Alasdair G Kergon
686acce23f lvconvert: Conversions between striped and raid0. 2016-06-28 23:44:15 +01:00
David Teigland
ebd2758dab vgimportclone: add native command
This is cleaner and more efficient than the script.
The args and usage are unchanged.
2016-06-22 13:13:10 -05:00
Zdenek Kabelac
a28c81cbae debug: unify some tracing messages
Introduce  FMTVGID - although it might be possibly better to ensure
vgid is always \0 ended string.

Unify some lvmcache reported messages.
2016-04-12 13:06:16 +02:00
Peter Rajnoha
9f28eb4c20 fix: make udev_get_library_context available also for non-udev compilations
If compiling without udev_sync support, udev_get_library_context simply
returns NULL so we don't need to remember putting ifdef UDEV_SYNC_SUPPORT
in the code all the time we just need to check whether there's any udev
context initialized or not.
2016-04-01 15:35:22 +02:00
David Teigland
57cd94b9e3 pvs: replace 'unknown device' with [unknown]
A config setting can restore the old string.
2016-03-01 11:12:03 -06:00
Zdenek Kabelac
eaaae185b7 coverity: check for zero length buffer
When get_shared_library_path() would got zero length buffer,
it could have underflow in size calc later.
So just put extra small check for this case.
2016-02-23 21:40:16 +01:00
Zdenek Kabelac
fcbef05aae doc: change fsf address
Hmm rpmlint suggest fsf is using a different address these days,
so lets keep it up-to-date
2016-01-21 12:11:37 +01:00
Zdenek Kabelac
4afe43e1a3 debug: show LV name where dlid creation failed 2015-11-26 21:52:05 +01:00
Zdenek Kabelac
22e19cb354 cleanup: reoder rstatus init
In all error paths always initialize *rstatus.
2015-11-09 10:22:52 +01:00
Zdenek Kabelac
e262d5e596 cleanup: keep using enum typedef
Using enum instead of unsigned.
2015-11-09 10:22:52 +01:00
Zdenek Kabelac
e5b686d693 tools: update for lvm2_disable_dmeventd_monitoring
Make lvm2_disable_dmeventd_monitoring() more explicit.

As memlock_inc_daemon() is also used by clvmd, which
does changes dmeventd and suspend ignore state at
some stages - make updates of these 2 variable
tied to the call of  lvm2_disable_dmeventd_monitoring().

Once this call is made dmeventd monitoring
and suspended devices are ignored.

TODO: all lvm-global settings should really be moved
to command context.
2015-10-23 10:54:13 +02:00
Zdenek Kabelac
075f85dcb5 tools: do not change signals for memlocked daemons 2015-10-22 22:26:30 +02:00
Zdenek Kabelac
d2c4ce254b tools: preselect some setting for memlocked daemons
When our daemon is locked into memory - avoid
communication with dmeventd and also skip
suspended devices.
2015-10-22 22:26:30 +02:00
Zdenek Kabelac
9403edbb93 configure: relocate generated headers
Relocate generated configure.h and lvm-version.h outside
of compilable .c source tree.

The reason is behind - when compiling in builddir != srcdir
the generated file in lib/misc/configure.h was used for all compiled
source file except ones located in lib/misc dir - those would have used
configure.h file located in this dir - if there have existed one (i.e.
from some other build)

This problem was only visible, when srcdir == buildir was used before
trying to use  srcdri != builddir  (as configure.h appeared then in
srcdir).
2015-09-07 17:40:58 +02:00