IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is actually the wipefs functionailty as a matter of fact
(wipefs uses the same libblkid calls).
libblkid is more rich when it comes to detecting various
signatures, including filesystems and users can better
decide what to erase and what should be kept.
The code is shared for both pvcreate (where wiping is necessary
to complete the pvcreate operation) and lvcreate where it's up
to the user to decide.
The verbose output contains a bit more information about the
signature like LABEL and UUID.
For example:
raw/~ # lvcreate -L16m vg
WARNING: linux_raid_member signature detected on /dev/vg/lvol0 at offset 4096. Wipe it? [y/n]
or more verbose one:
raw/~ # lvcreate -L16m vg -v
...
Found existing signature on /dev/vg/lvol0 at offset 4096: LABEL="raw.virt:0" UUID="da6af139-8403-5d06-b8c4-13f6f24b73b1" TYPE="linux_raid_member" USAGE="raid"
WARNING: linux_raid_member signature detected on /dev/vg/lvol0 at offset 4096. Wipe it? [y/n]
The verbose output is the same output as found in blkid.
The wipe_known_signatures fn now wraps the _wipe_signature fn that is called
for each known signature (currently md, swap and luks). This patch makes the
code more readable, not repeating the same sequence when used anywhere in the
code. We're going to reuse this code later...
Put common printf() case into a function and use
the string with text format as direct arg to make
the compile time validation of args easier and
code shorter.
Switch log_error() to log_warn(), since 'return 0'
doesn't cause any failure here.
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.
When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.
Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.
Log each filter initialisation to show sequence.
Avoid duplicate 'Using $device' debug messages.
The dev_get_primary_dev fn now returns:
0 if the dev is already a primary dev
1 if the dev is a partition, primary dev is returned in "result" (output arg)
-1 on error
This way, we can better differentiate between the error state
and the state in which the dev supplied is not a partition
in the caller (this was same return value before).
Also, if we already have information about the device type,
we can check its major number against the list of known device
types (cmd->dev_types) directly, so we don't need to go through
the sysfs - we only check the major:minor pair which is a bit
more straightforward and faster. If the dev_types does not have
any info about this device type, the code just fallbacks to
the original sysfs interface to get the partition info.
Changes:
- move device type registration out of "type filter" (filter.c)
to a separate and new dev-type.[ch] for common use throughout the code
- the structure for keeping the major numbers detected for available
device types and available partitioning available is stored in
"dev_types" structure now
- move common partitioning detection code to dev-type.[ch] as well
together with other device-related functions bound to dev_types
(see dev-type.h for the interface)
The dev-type interface contains all common functions used to detect
subsystems/device types, signature/superblock recognition code,
type-specific device properties and other common device properties
(bound to dev_types), including partitioning support.
- add dev_types instance to cmd context as cmd->dev_types for common use
- use cmd->dev_types throughout as a central point for providing
information about device types
Last commit made dump filter only partially composable.
Add remaining functionality and also support composable wipe,
which is needed, when i.e. vgscan needs to remove cache.
(in release fix)
Add a generic dump operation to filters and make the composite filter call
through to its components. Previously, when global filter was set, the code
would treat the toplevel composite filter's private area as if it belonged a
persistent filter, trying to write nonsense into a non-sensical file.
Also deal with NULL cmd->filter gracefully.
For example, the old call and reference:
find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)
...now becomes:
find_config_tree_str(cmd, devices_dir_CFG)
So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
Use log_warn to print non-fatal warning messages.
Use of log_error would confuse checker for testing
whether proper error has been reported for some real error.
There's no need to have the device open RW while obtaining the readahead value.
The RW open used before caused the CHANGE udev event to be generated if the
WATCH udev rule was set for the underlying device (and that is normally the
case both for non-dm and dm devices by default).
This did not cause any problems before since we were not interested in
*underlying* devices. However, with upcoming changes (autoactivation), we're
watching for events on underlying devices marked as PVs and such a spurious
event could cause the autoactivation code to be triggered. So when trying
to deactivate the volume, we could end up with immediate activation just after
that because of the CHANGE event originated in the WATCH udev rule since the
underlying device was open RW during the deactivation process.
Though maybe a better solution would be to completely filter such spurious
events out of the autoactivation process somehow, it's still useful if there
are as least spurious events generated as possible in the system itself.
Libudev does not provide transactions when querying udev database - once we
get the list of block devices (devices/obtain_device_list_from_udev=1) and
we iterate over the list to get more detailed information about device node
and symlink names used etc., the device could be removed just in between we
get the list and put a query for more info. In this case, libudev returns
NULL value as the device does not exist anymore.
Recently, we've added a warning message to reveal such situations. However,
this could be misleading if the device is not related to the LVM action
we're just processing - the non-related block device could be removed in
parallel and this is not an error but a possible and normal operation.
(N.B. This "missing info" should not happen when devices are related to
the LVM action we're just processing since all such processing should be
synchronized with udev and the udev db must always be in consistent state
after the sync point. But we can't filter this situation out from others,
non-related devices, so we have to lower the message verbosity here for a
general solution.)
Save some relocation entries and use directly char[].
Since we do not need yes more then 127 partitions per device, use just int8_t.
Move lvm_type_filter_destroy into local static function.
Avoid using NULL pointers from udev. It seems like some older versions of udev
were improperly returning NULL in some case, so do not silently break here,
and give at least a warning to the user.
Since the function dev_close() has code path, which really could close
file (for unlocked vg) and destroy dev handler, stay on safe side and move
the close few lines later, even our current use case shouldn't trigger
such scenario.
Since the !(dev->flags & DEV_REGULAR) code path just called
dev_name_confirmed() which has just called 'stat()' inside,
remove duplicate second stat() call here.
When both path have identical prefix i.e. /dev/disk/by-id
skip 2 x lstat() for /dev /dev/disk /dev/disk/by-id
and directly lstat() only different part of the path.
Reduces amount of lstat calls on system with lots of devices.
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
If MD linear device has set rounding (overload chunk size attribute),
the pvcreate command prints this warning:
/dev/md0 sysfs attr level not in expected format: linear
Before, we used vg_write_lock_held call to determnine the way a device is
opened. Unfortunately, this opened many devices in RW mode when it was not
really necessary. With the OPTIONS+="watch" rule used in the udev rules,
this could fire numerous events while closing such devices (and it caused
useless scans from within udev rules in return).
A common bug we hit with this was with the lvremove command which was unable
to remove the LV since it was being opened from within the udev rules. This
patch should minimize such situations (at least with respect to LVM handling
of devices).
Though there's still a possibility someone will open a device 'outside' in
parallel and fire the event based on the watch rule when closing a device
once opened for RW.
Also, add a new 'obtain_device_list_from_udev' setting to lvm.conf with which
we can turn this feature on or off if needed.
If set, the cache of block device nodes with all associated symlinks
will be constructed out of the existing udev database content.
This avoids using and opening any inapplicable non-block devices or
subdirectories found in the device directory. This setting is applied
to udev-managed device directory only, other directories will be scanned
fully. LVM2 needs to be compiled with udev support for this setting to
take effect. N.B. Any device node or symlink not managed by udev in
udev directory will be ignored with this setting on.
Return value of readlink limits valid string size.
Characters after returned size present some garbage to printf.
Fix it by placing '\0' on the return size value.
New strategy for memory locking to decrease the number of call to
to un/lock memory when processing critical lvm functions.
Introducing functions for critical section.
Inside the critical section - memory is always locked.
When leaving the critical section, the memory stays locked
until memlock_unlock() is called - this happens with
sync_local_dev_names() and sync_dev_names() function call.
memlock_reset() is needed to reset locking numbers after fork
(polldaemon).
The patch itself is mostly rename:
memlock_inc -> critical_section_inc
memlock_dec -> critical_section_dec
memlock -> critical_section
Daemons (clmvd, dmevent) are using memlock_daemon_inc&dec
(mlockall()) thus they will never release or relock memory they've
already locked memory.
Macros sync_local_dev_names() and sync_dev_names() are functions.
It's better for debugging - and also we do not need to add memlock.h
to locking.h header (for memlock_unlock() prototyp).
Change API interface to accept even completely const array patterns.
This should present no change for libdm users and allows to pass
pattern arrays without cast to const char **.
To have better control were the config tree could be modified use more
const pointers and very carefully downcast them back to non-const
(for config tree merge).
One shiny day we should use libblkid here. But now using LUKS is
very common together with LVM and pvcreate destroys LUKS completely.
So for user's convenience, try to detect LUKS signature and allow abort.
We can already detect MD devices internally. But when using MD partitions,
these have "block extended major" (blkext) assigned (259). Blkext major
is also used in general, so we need to check whether the original device
is an MD device actually.
Eliminate busy loop during pvcreate of a "normal" partition.
_md_sysfs_attribute_snprintf() would busy loop if the device it was
given was not a blkext-based MD partition.
Rather than being cute with a busy-loop prone 'goto check_md_major' in
_md_sysfs_attribute_snprintf(): explicitly check if the provided device
is a blkext-based partition (blkext_major()); and then check that the
get_primary_dev() determined parent is an MD device (md_major()).
Rename private _primary_dev() to a public get_primary_dev() and reuse it
to allow retrieval of the MD sysfs attributes (raid level, etc) for MD
partitions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Improve lib/device/device.c:_primary_dev()'s ability to look up the
primary device associated with all partitions; including blkext
(e.g. partitions directly on MD). The same will also work for obscure
sysfs paths; e.g.: paths with mangled names like the HP cciss driver
uses: /sys/block/cciss!c0d0/cciss!c0d0p1/
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Adds 'data_alignment_detection' config option to the devices section of
lvm.conf. If your kernel provides topology information in sysfs (linux
>= 2.6.31) for the Physical Volume, the start of data area will be
aligned on a multiple of the ’minimum_io_size’ or ’optimal_io_size’
exposed in sysfs.
minimum_io_size is used if optimal_io_size is undefined (0). If both
md_chunk_alignment and data_alignment_detection are enabled the result
of data_alignment_detection is used.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we are stacking LV over device, which has for some reason
increased read_ahead (e.g. MD RAID), the read_ahead hint
for libdevmapper is wrong (it is zero).
If the calculated read_ahead hint is zero, patch uses read_ahead of underlying device
(if first segment is PV) when setting DM_READ_AHEAD_MINIMUM_FLAG.
Because we are using dev-cache, it also store this value to cache for future use
(if several LVs are over one PV, BLKRAGET is called only once for underlying device.)
This should fix all the reamining problems with readahead mismatch reported
for DM over MD configurations (and similar cases).
The warning is bogus and is only seen on certain versions of gcc.
However using the enum does seem to clarify the intent of the code - only
3 possible md minor superblock versions.
Related compiler warning:
device/dev-md.c:53: warning: 'sb_offset' may be used uninitialized in this function
* lib/device/dev-io.c (dev_open_flags):
Use log_sys_error after failed stat to report strerror(errno).
Use a slightly different diagnostic to report mismatched device number.
event-driven model. Without changes to the way the cache gets updated, the
option is currently unreliable without a global lock to prevent any lvm2
commands from running concurrently.
Additional verbosity level -vvvv includes line numbers and backtraces.
Verbose messages now go to stderr not stdout.
Close any stray file descriptors before starting.
Refine partitionable checks for certain device types.
Allow devices/types to override built-ins.
Clear many compiler warnings (i386) & associated bugs - hopefully without
introducing too many new bugs:-) (Same exercise required for other archs.)
Default compilation has optimisation - or else use ./configure --enable-debug
Lots of changes/very little testing so far => there'll be bugs!
Use 'vgcreate -M text' to create a volume group with its metadata stored
in text files. Text format metadata changes should be reasonably atomic,
with a (basic) automatic recovery mechanism if the system crashes while a
change is in progress.
Add a metadata section to lvm.conf to specify multiple directories if
you want (recommended) to keep multiple copies of the metadata (eg on
different filesystems).
e.g. metadata {
dirs = ["/etc/lvm/metadata1","/usr/local/lvm/metadata2"]
}
Plenty of refinements still in the pipeline.
Patrick, can you see if this fixes your cluster syncing problem please ?
If so I'll make it so it only syncs if you have actually written to the
device.
This should be a rare occurrence so the aim is to recover if it's
straightforward to do so, otherwise just to abort the operation.
If people *knowingly* change device names, they should always run vgscan
afterwards.
A few bytes of memory gets leaked inside a pool each time an alias
has to be discarded - it's not worth restructuring the code to reuse it.
More of LVM2 needs updating to pass device objects (or uuids) about
instead of pathnames so that resolution of pathname->object only happens
once per operation.
dev_cache_get() should now always return the *current* device at the path given
dev_name_confirmed() replaces dev_name() whenever it's important to
know that name for the device is still current (ie when opening it).
If the cache doesn't know a current name, the function fails.
dev_open() guarantees that the file descriptor returned is for the dev_t
of the device structure it was passed.
o When opening device, return error if its cached name is incorrect (eg if
it's changed since the cache was generated). This prevents use until
the cache is rebuilt (eg with vgscan). Doesn't catch every case.
o updated vgcfgrestore args
o change _check_for_open_devices only to check devices present in the hash
table instead of using dev_iter which triggers a full scan even when only
displaying command line help
o roll vgcache back to agk's implementation, we'll revisit this as part
of the cluster integration.
o change the extra_info field in a label to be a void *
o Changed disk-rep to use these
o if NDEBUG is not defined the dev_cache will check for open devices on
teardown.
I was hoping this would speed things up. But I'm still getting:
reti:/home/joe/sistina/LVM2/tools# time ./lvm vgchange -a n
Volume group vg0 successfully changed
real 0m5.751s
user 0m0.060s
sys 0m0.070s
even though I have only 1 device with the vg on it passing the filters.
devices {
# first match is final, eg. /dev/ide/cdrom
# get's rejected due to the first pattern
filter=["r/cdrom/", # don't touch the music !
"a/hd[a-d][0-9]+/",
"a/ide/",
"a/sd/",
"a/md/",
"a|loop/[0-9]+|", # accept devfs style loop back
"r/loop/", # and reject old style
"a/dasd/",
"a/dac960/",
"a/nbd/",
"a/ida/",
"a/cciss/",
"a/ubd/",
"r/.*/"] # reject all others
}
Alasdair this is ready to roll into the tools now.
