IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a cmd def implies an LV type without --type
in the required options, then include the implied
type in the cmd def as AUTOTYPE: <type>
instead of including the redundant --type foo
in the OO list of options.
Including an implied --type in the OO list would
often cause multiple cmd defs to potentially be
identical when options were used, and a user
command could match more than one cmd def.
The AUTOTYPE values are listed in man page and
help output as
[ --type foo (implied) ]
If a user command includes --type, it will usually
match a cmd def with --type in the required options.
But, if the user command matches a cmd def with
AUTOTYPE, then the specifed --type and AUTOTYPE must
match.
The man-generator program has a new --check
option that compares cmd defs to find any cmd defs
that are equivalent with the use of options,
and should have their options adjusted.
Compares cmd defs based on two principles for avoiding repeated
commands (where a given command could match more than one cmd def):
. a cmd def should be a unique combination of required
option args and position args
. avoid adding optional options to a cmd def that if
used would make the command match a different cmd def
FIXME: record when repeated cmd defs are found so we can
avoid reporting them twice, e.g. once for A vs B and
second time for B vs A.
Use #DEFAULT_SYS_DIR# replaceable string for devicesfile
so the man pages installation respects configured settings.
Update some missing lvm.conf(5) references.
Add missing VG into description of thin pool creation command.
Remove one duplicated thin-pool creation command.
Remove options --discards and --errorwhenfull from the list when the command describes
only creation of a thin volume - as these options do apply for thin-pool.
Also use here more correct name OO_LVCONVERT_THINPOOL instead of OO_LVCONVERT_THIN.
Reorder extra options for cache & thin-pool before common pool options.
Order consistenly --stripes and --stripesize after --extents option
so the options related to pools are better together.
Remove invalid snapshot creation description - since this case is
handled through our configurable spare volume creation.
Add some missing optional --type parameters for few command instancies.
Emit .ad l / .ad b less frequently around larger blocks
we want to keep left aligned.
Avoid emittting empty lines.
Reduce .HP usage and replace it with .TP.
However keep .HP for all option listings, as i.e. html rendering
can't handle well combintion of .TP an .HP together and .TP alone
is not indenting 2nd. line of long option line.
(For .TP line we don't need to emit .br)
Surround .SH with dots for better look.
For some .TP use plain more readable .I for a line.
Support rendering of optional [Number] (for --units).
Use better markup for units and instead of long markup string,
show individual units with markup.
Enhance man typography decoration of optional option
prefixes like --[raid]writebeind and use regular font to render []
as these are not part of the option name itself.
Previously, accepted LV types were presented as a series of suffixes
after the "LV" on the command line. The addition of many new types
resulted in this becoming too long, e.g
lvconvert --type cache --cachepool LV LV_linear_striped_thinpool_vdo_vdopool_vdopooldata_raid
For man pages, move these types from the command line to a new line
dedicated to listing accepted LV types:
lvconvert --type cache --cachepool LV LV1
...
LV1 types: linear striped thinpool vdo vdopool vdopooldata raid
The special "LV1" is used as a reference to avoid confusion
with other LVs that may appear on the command line. There
are currently no commands with more than one typed LV, but
if there are cases with more, then "LV2" could also be used.
For command line usage/-h output, drop the LV types from the
command line specification. The more detailed is not needed
in the help output and can be found in the man page.
This reverts commit 8e7690b798.
Actully this was bad idea - to make it on pair.
-Zn for thin-pools is already used - so here user must have
create new pool and swap existing thin-pool metadata into.
So reverting this commit to avoid any possible regression.
It would be complicated to handle ',' alignment after hyphenation
changes ATM, but these commas seems to be there rather unneeded
so remove them and make the man output more clear.
Disable hyphenation around longer option lists (>42 chars)
and use \: to markup places for line splits.
The code ATM is somewhat mixtured so it's not easy to encapsulate
section .nh ... .hy.
ATM global _was_hyphen is used to properly finish sections after
disabled hyphenation.
The autoactivation property can be specified in lvcreate
or vgcreate for new LVs/VGs, and the property can be changed
by lvchange or vgchange for existing LVs/VGs.
--setautoactivation y|n
enables|disables autoactivation of a VG or LV.
Autoactivation is enabled by default, which is consistent with
past behavior. The disabled state is stored as a new flag
in the VG metadata, and the absence of the flag allows
autoactivation.
If autoactivation is disabled for the VG, then no LVs in the VG
will be autoactivated (the LV autoactivation property will have
no effect.) When autoactivation is enabled for the VG, then
autoactivation can be controlled on individual LVs.
The state of this property can be reported for LVs/VGs using
the "-o autoactivation" option in lvs/vgs commands, which will
report "enabled", or "" for the disabled state.
Previous versions of lvm do not recognize this property. Since
autoactivation is enabled by default, the disabled setting will
have no effect in older lvm versions. If the VG is modified by
older lvm versions, the disabled state will also be dropped from
the metadata.
The autoactivation property is an alternative to using the lvm.conf
auto_activation_volume_list, which is still applied to to VGs/LVs
in addition to the new property.
If VG or LV autoactivation is disabled either in metadata or in
auto_activation_volume_list, it will not be autoactivated.
An autoactivation command will silently skip activating an LV
when the autoactivation property is disabled.
To determine the effective autoactivation behavior for a specific
LV, multiple settings would need to be checked:
the VG autoactivation property, the LV autoactivation property,
the auto_activation_volume_list. The "activation skip" property
would also be relevant, since it applies to both normal and auto
activation.
Enhance handling of interruptions of polling process and lvmpoll daemon.
Daemon should now react much faster on interrups (i.e. shutdown
sequence) and avoid taking lenghty sleep waiting on pvmove signaling.
Since lvm does support external users of thin-pool when thin devices
are managed outside it can be useful to support conversion to
thin pool from data and metadata LV without zeroing.
TransactionID will be 0 in lvm2 metadata.
lvconvert -Zn --thinpool vg/data --poolmetadata vg/meta
Renables usage of --type zero and --type error LVs to serve as
backend for _tdata device. Clearly not very useful in practice,
as it can't store any real data, but usable for some testing
and some sort of perfomance checking.
lvcreate --type zero -L1T -n pool vg
lvconvert --thinpool vg/pool
Will create a thin-pool with zero device backend.
Enabled extension/mixing of stripes/linears, error and zero
segtype LVs with stripes/linear, error and zero segtypes.
It is not very useful in practice, as the user cannot store any real
data on error or zero segtypes, but it may get some uses in
some scenarios where i.e. some portion of the device should not be
readable. Mixing of types happens on 'extent_size' level:
lvcreate -L1 -n lv vg
lvextend --type error -L+1 vg/lv
lvextend --type zero -L+1 vg/lv
lvextend --type linear -L+1 vg/lv
lvextend --type striped -L+1 vg/lv
lvs -o+segtype,seg_size vg
Note: when the type is not specified, the last segment type is
automatically selected.
It's also a small 'can of worms' since we can't tell LVs if
the LV is linear/error/zero or their mixtures. So the meaning behind
them may need some updates.
We already have this types of LV created i.e by:
vgreduce --removemissing --force
where missing LV segments have been replaced by either
error or zero segtype (lvm.conf).
TODO: it might be worth adding a message while such device is activated.
When multiple polling tasks are watching for same LV, clearly
when some of them wins the game - other polling tasks will fail.
Improve the logic and report success if the merged LV is
actually not a merging origin anymore (since likely someone
else has already finished merging).
Although we support '0' interval - it's highly inefficent to
do so many scans in busy-loop.
So ATM raise minimal rescan time to 100ms.
TODO: revisit whole timing logic here as it does have some sideeffect
hiddent impact and can considerably eat CPU in some cases.
There is really no practical reason to continue running
when we fail on allocation.
It seems we may need further fine frained errors, as for
some error type we simply need to exit ASAP, while
others may still produce usable results.
When generating list of processed LV, add thin-pool to the head of the
list, while other LVs are added on tail.
This makes it easier when removing many thin volumes, to recognize easily
when its thin-pool is also supposed to be removed.
The correct test needs to actually check 'lv->snapshot' is not NULL,
so the 'find_snapshot()' can work.
Test lv_is_snapshot was actually irrelavant for this case.
Also initialize device_id.
