IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is probably better approach than 3880ca5eca.
If dm module is not loaded during dm_is_dm_major call, there are no
lines for dm in /proc/devices, of course. Normally, dm_is_dm_major
is called to check existing devices, hence if module is not loaded,
we can expect there's no DM device present at the same time so we
can directly return 0 here (meaning the major number being inspected
is not dm device's one).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1059711.
For dm_is_dm_major to determine whether the major number given as
an argument belongs to a DM device, libdm code needs to know what
the actual DM major is to do the comparison.
It may happen that the dm-mod module is not loaded during this
call and so for the completness let's try our best before we start
giving various errors - we can still make use of dm-mod autoloading,
though only since kernels 2.6.36 where this feature was introduced.
This patch adds a new flag --deferred to dmsetup remove. If this flag is
specified and the device is open, it is scheduled to be deleted on
close.
struct dm_info is extended.
The existing dm_task_get_info() is converted into a wrapper around the
new version dm_task_get_info_with_deferred_remove() so existing binaries
can still use the old smaller structure.
Recompiled code will pick up the new larger structure.
From: Mikulas Patocka <mpatocka@redhat.com>
Recent kernels allow messages to respond with a string.
Add dm_task_get_message_response() to libdevmapper to perform some
basic sanity checks and return this.
Have 'dmsetup message' display any response.
DM statistics will make extensive use of this.
(From Mikulas.)
On each ioctl return, the device UUID is decoded from \xNN format.
If the UUID of the device being *removed* is malformed (e.g. it
hasn't been corrected before), just remove it without any error
as the UUID is not needed anymore - the device is gone anyway.
Otherwise a misleading error message would be issued just after
the removal:
# dmsetup remove test
The UUID "a b" should be mangled but it contains blacklisted characters.
Command failed
Just like we already have existing mangling support for
device-mapper names, we need exactly the same for device-mapper
UUIDs as their character whitelist is wider than what udev supports.
In case udev is used to create entries in /dev based on UUIDs
and these UUIDs contain characters not supported by udev,
we'll end up with incorrect /dev content for such devices.
So we need to mangle them to a form that is supported by udev.
The mangling used for UUIDs follows the mangling used for names
(that is already supported and used throughout). That means,
setting the name mangling mode via dm_set_name_mangling_mode
affects mangling used for UUIDs in exactly the same manner.
It would be useless to add a new and separate
dm_set_uuid_mangling_mode fn, we'll reuse existing interface.
(un)mangle_name -> (un)mangle_string
check_multiple_mangled_name_allowed -> check_multiple_mangled_string_allowed
Just for clarity as the same functions will be reused to (un)mangle dm UUIDs.
Auto mode can't deal with multiple mangled names. We can do that while working
in hex mode, but in auto mode, this would lead to device name ambiguity.
Be more strict when unmangling names on ioctl return - require the name to be
properly mangled in 'auto' and 'hex' mode. There really should not be any
blacklisted character since the names should be renamed already (by means of
renaming it directly or running 'dmsetup mangle' for automatic rename).
Since lvm seems to call driver_version(NULL, 0) this would lead
to crash. Though the combination of the code is probably very hard to hit.
If the user doesn't supply version buffer, just skip printing to buffer.
Device-mapper in kernel uses '\' as escape character so it's better
to double it to avoid any confusion when using existing device names
with '\' in the table specification.
For example:
dmsetup create x --table "0 8 linear /dev/mapper/a\x20b 0"
should pass just fine now without a need to explicitly escape the '\' char
like this:
dmsetup create x --table "0 8 linear /dev/mapper/a\\x20b 0"
If dm_task_get_name or dm_task_get_names gets called, these will return
unmangled form of the names so the name mangling stays totally transparent
to any libdevmapper user (unless DM_STRING_MANGLING_NONE is used in which
case the name is not touched and it is is returned as it is in kernel).
For example:
dmsetup create "a b" - will create a\x20b device in kernel and so udev will
create /dev/mapper/a\x20b
dm_task_get_name/names will still return "a b"
In AUTO mode, the libdevmapper user can still query the device by using
the mangled ("a\x20b") or unmangled form of the name when calling dm_task_set_name.
If mangled name is provided, it's detected and the name is kept as it is.
If unmangled name is provided, it will be mangled. IOW in AUTO mode it's
totally transparent and it should not require any changes in the code
using libdevmapper.
However, any libdevmapper user must be aware of the fact that the mangled form
of the name appears in /dev/mapper (udev just can't deal with those blacklisted
characters).
Use the DEV_NAME macro to use the mangled form of the name if present,
use normal name otherwise (we store both forms - mangled and unmangled in
struct dm_task). Mangled form should be always preferred over unmangled
with the exception of the situations where we divide one task into several
others (like "create and load") - we need to avoid mangling the name twice
(because of multiple dm_task_set_name calls)!
If dm_task_set_name/newname is called, the name provided will be
automatically translated to correct encoded form with the hex enconding
so any character not on udev whitelist will be mangled with \xNN
format where NN is hex value of the character used.
By default, the name mangling mode used is the one set during
configure with the '--with-default-name-mangling' option.
Since the function dm_get_next_target() returns NULL as 'next' pointer
so it's not a 'real' error - set 0 to all parameters when NULL is
returned because of missing head.
i.e. one of use case::
do {
next = dm_get_next_target(dmt, next, &start, &length,
&target_type, ¶ms);
size += length;
} while (next);
If we know major:minor number of device (which is known after resume) we will
try to use sysfs to set/get read ahead parameters of device.
This avoid potential problem of blocking commands like 'dmsetup info' awaiting
for device being usable for open/close - i.e. overfilled thin pool may block
such command.
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
Avoid creation of target type name when it's longer then
DM_MAX_TYPE_NAME (noticed by static analyzer where the
sp.target_type might be missing '\0' at the end.)
Before patch:
$> dmsetup create long
0 1000 looooooooooooooooooooooooooong
^D
device-mapper: reload ioctl failed: Invalid argument
After patch:
$> dmsetup create xxx
0 1000 looooooooooooooooooooooooooong
Target type name looooooooooooooooooooooooooong is too long.
Command failed
Certain errno codes could be expected in some situations thus
add experimental support for them.
When expected errno is set after ioctl error - function skips error
printing and exits succefully.
Currently only useful for thin pool messages.
This is a workaround for long-lasting problem with using the WATCH udev
rule. When trying to remove a DM device, this one can still be opened
while processing the event in parallel (generated based on the WATCH
udev rule).
Let's use this until we have a proper solution.
and use this for the LVM critical section logic. Also report an error if
code tries to load a table while any device is known to be in the
suspended state.
(If the variety of problems these changes are showing up can't be fixed
before the next release, the error messages can be reduced to debug
level.)
LVM doesn't behave correctly if running as non-root user,
there is warning when it detects it.
Despite this, it produces many error messages, saying nothing.
See https://bugzilla.redhat.com/show_bug.cgi?id=620571
This patch fixes two things:
1) Removes eror message from device_is_usable() which has no
information value anyway (real warning is printed inside it).
2) it fixes device-mapper initialization, if we support
core dm module autoload and device node is present, it should
fail early and not try recreate existing and correct node.
(non-root == permission denied here)
N.B. In future code should support user roles, some more
drastic checks in code are probably contraproductive now.
When the ->params string is empty - memory access is made on the byte
before allocated buffer (catched by valgrind) - in the case it would
constain 0x20 - it would even overwrite this buffer.
So fix by checking len > 0 before doing such access.
Also slightly optimise this loop from repeated strlen call.
Add new function dm_task_set_add_node() to select between 2 types
of node creation in device directory.
DM_ADD_NODE_ON_RESUME is now default and ensures node is created on
resume. Old original behavior is accessible with DM_ADD_NODE_ON_CREATE.
In this case node would be created during dmsetup create --notable.
For the user 2 new options for dmsetup create are added:
[{--addnodeonresume | --addnodeoncreate }]
Properly working node creation on resume is needed for proper operation
stacking and ability to correctly check in which state the device should
after whole udev transation.
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.
We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
We can't rely on the fact that udev should prepare the node with right major
and minor number to trigger the module autoloading. We have to take into
account that the node could be missing or it could exist with improper
major and minor number assigned (e.g. from previous kernel versions in
an environment with static nodes and without udev). Make any corrections
if needed!
There was missing "revert" call in _create_and_load_v4 fn while the preparation
for table load ends up with failure in create/load/resume sequence. Otherwise
we could end up with a device being created, but not table-loaded nor resumed.
Even though the table is not loaded and the device is not resumed at this
stage, we still need to synchronize with udev when calling the revert
"remove" ioctl - there's still a remove uevent generated! The "revert"
code does exactly that.
A kernel patch is on its way for 2.6.35 adding support for dm-mod module
autoload. Udev v155 and higher is able to read static node information given
in modules.devname (extracted by depmod before) and will create such nodes
at its start. The first access to such node will load the module automatically
(directly in kernel) before the actual read/write operation is processed.
(with table provided).
This remove ioctl generates udev events like any other hence it needs to be
synchronized properly as well. Also, add dm task type in debug log when
setting a cookie (for better debugging).
This rule appeared in udev v152 and it helps us to support spurious events
where we didn't have any flags set (events originated in udevadm trigger
or the watch rule). These flags are important to direct the rule application.
Now, with the help of this rule, we can regenerate old udev db content.
To implement this correctly, we need to flag all proper DM udev events with
DM_UDEV_PRIMARY_SOURCE_FLAG. That happens automatically for all ioctls
generating events originated in libdevmapper.
