1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

225 Commits

Author SHA1 Message Date
Zdenek Kabelac
55a9262bdb cleanup: unused header files (Coverity) 2015-08-18 15:00:08 +02:00
David Teigland
ca70770cfd config: recognize a blank comment line
Consider the comment line "#\n" to be a blank line, and
print a blank line at that position when --withspaces is set.
2015-08-17 13:52:34 -05:00
David Teigland
5243a81c29 config: explain automatic default values
Before printing a commented automatic config value,
print a line describing what it is.  Otherwise, the
commented value can look like it's a part of an
example preceding it.
2015-08-17 13:52:34 -05:00
Zdenek Kabelac
4b28383b1c cache: move detection code to cache_set_policy
Move code which runtime detects settings for cache_policy
out of config dir to cache seg handling code.

Also mark cache_mode as command profilable setting.
2015-08-17 15:52:06 +02:00
Alasdair G Kergon
623b46a17d device: Don't try to close config file on failure.
$file: open failed: Permission denied
Failed to load config file $file
Attempt to close device '$file' which is not open.
2015-08-17 12:57:01 +01:00
Zdenek Kabelac
feb8e9a790 cache: runtime detect default policy
When the policy is not preset in lvm.conf,
detect in runtime whether to use 'mq' or
new available 'smq'.
2015-08-12 14:11:17 +02:00
Zdenek Kabelac
036d90bba6 cache: add cache_policy cache_settings
Add new profilable configurables:

allocation/cache_policy
allocation/cache_settings

and mark allocation/cache_pool_chunk_size as profilable as well.

Obsolete allocation/cache_pool_cachemode and
introduce new allocation/cache_mode instead.

Rename DEFAULT_CACHE_POOL_POLICY to DEFAULT_CACHE_POLICY.
2015-08-12 14:11:16 +02:00
Peter Rajnoha
8bfcefe11a config: add CFG_SECTION_NO_CHECK flag
The CFG_SECTION_NO_CHECK flag can be used to mark a section
and its whole subtree as containing settings where checks
won't be made (lvmconfig --validate).

These are setting where we don't know the names and and type
in advance and they're recognized in runtime. As we don't know
the type and name in advance, we can't do any checks here
of course.

Use this flag with great care as it disables config checks
for the whole config subtree found under such section.

This flag is going to be used by subsequent patches from
Zdenek to support some cache settings...
2015-07-22 14:25:42 +02:00
Peter Rajnoha
d10fb73f63 config: also log the value used if defined in config, not just defaults
Commit 7e728fe1a1 added a log call
directly in find_config_tree_array when defaults are used.

This patch also adds the log for the value which is found in
existing configuration and for which defaults are not used.

For example:

Defaults used:
config/config.c:1428   devices/scan not found in config: defaulting to scan = [ "/dev" ]

Value defined in configuration used:
config/config.c:1431   Setting devices/scan to scan = [ "/dev", "/mydev", "/abc" ]

This makes the logging consistent with the other find_config_tree_* functions.
2015-07-15 16:02:20 +02:00
Peter Rajnoha
7e728fe1a1 config: add "defaulting to" message in case we fall back to defaults in find_config_tree_array 2015-07-15 10:50:57 +02:00
Peter Rajnoha
3b6840e099 config: replace find_config_tree_node with find_config_tree_array where appropriate 2015-07-08 13:03:08 +02:00
Peter Rajnoha
67a61cce1b config: add find_config_tree_array
Before, we used general find_config_tree_node function to retrieve
array values. This had a downside where if the node was not found,
we had to insert default values directly in-situ after the
find_config_tree_node call. This way, we had two copies of default
values - one in config_settings.h and the other one directly in the
code where we found out that find_config_tree_node returned NULL and
hence we needed to fall back to defaults.

With separate find_config_tree_array used for array config values,
we keep all the defaults centrally in config_settings.h because
the new find_config_tree_array automatically returns these defaults
if it can't find any value set in the configuration.

This patch just makes the behaviour exactly the same for arrays as
for any other non-array type where we call find_config_tree_<type>
already, hence making the internal interface for handling array
values consistent with the rest of the config types.
2015-07-08 12:59:22 +02:00
Peter Rajnoha
844707067b lvmconfig: do not display settings with undefined default values
Do not display settings with undefined default values, but do display
these settings in case the value is defined directly in any part of
the existing config cascade.

For example, the lvmconfig --type current always displays these settings
(as it's somewhere in "current" configuration cascade that makes it defined).
The lvmconfig --type full displays these settings only if it's defined
somewhere in the cascade, but not if default value is used instead
The lvmconfig --type default never displays these settings...

More concrete example - let's have activation/volume_list directly
set in lvm.conf and activation/read_only_volume_list not set.
Both of these settings have *undefined default* values.

  $lvmconfig --type full activation/volume_list activation/read_only_volume_list
  volume_list="/dev/vg/lv"

(...only volume_list is defined, hence it's printed)

However, the comments will display more info (see also previous commit):

  $lvmconfig --type full activation/volume_list activation/read_only_volume_list --withsummary

  # Configuration option activation/volume_list.
  # Only LVs selected by this list are activated.
  # This configuration option does not have a default value defined.
  # Value defined in existing configuration has been used for this setting.
  volume_list="/dev/vg/lv"

  # Configuration option activation/read_only_volume_list.
  # LVs in this list are activated in read-only mode.
  # This configuration option does not have a default value defined.
2015-06-25 13:51:55 +02:00
Peter Rajnoha
07a34184db lvmconfig: display comment about value from existing config being used
Display comment abour value from existing config being used. For example:

$ lvmconfig --type full --withsummary report/compact_output report/buffered

 # Configuration option report/compact_output.
 # Do not print empty report fields.
 # Value defined in existing configuration has been used for this setting.
 compact_output=1

 # Configuration option report/buffered.
 # Buffer report output.
 buffered=1
2015-06-25 13:51:54 +02:00
Peter Rajnoha
c794c163b5 lvmconfig: add --type full to display full tree of settings
The lvmconfig --type full is actually a combination of --type current
and --type missing together with --mergedconfig options used.

The overall outcome is a configuration tree with settings as LVM sees
it when it looks for the values - that means, if the setting is defined
in some config source (lvm.conf, --config, lvmlocal.conf or any profile
that is used), the setting is used. Otherwise, if the setting is not
defined in any part of the config cascade, the defaults are used.

The --type full displays exactly this final tree with all the values
defined, either coming from configuration tree or from defaults.
2015-06-25 13:33:52 +02:00
Peter Rajnoha
a4724350e4 lvmconfig: add --withspaces option
We shouldn't be adding spaces by default in output as that
may be be used already in scripts and especially for the eval
in shell scripts where spaces are not allowed between key
and value!

Add --withspaces option to lvmconfig for pretty output with
more space in for readability.
2015-06-24 13:19:23 +02:00
Peter Rajnoha
9465963faf config: add support for config value formatting flags
There are two basic groups of formatting flags (32 bits):
  - common ones applicable for all config value types (lower 16 bits)
  - type-related formatting flags (higher 16 bits)

With this patch, we initially support four new flags that
modify the the way the config value is displayed:

  Common flags:
  =============

  DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
    to be enclosed in "[ ]" even if there's only one item
    (previously, there was no way to recognize an array with one
     item and scalar value, hence array values with one member
     were always displayed without "[ ]" which libdm accepted
     when reading, but it may have been misleading for users)

  DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
    be inserted in "key = value" (or key = [ value, value, ... ] in
    case of arrays), compared to "key=value" seen on output before.
    This makes the output more readable for users.

  Type-related flags:
  ===================

  DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
    "0" as a prefix (libdm's config reading code can handle this via
    strtol just fine so it's properly recognized as number in octal
    form already if there's "0" used as prefix)

  DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
    strings without enclosing " "

This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
2015-06-24 11:13:37 +02:00
Peter Rajnoha
11e0dc40dc config: add CFG_DEFAULT_COMMENTED to comment out default value on output 2015-04-30 18:26:56 +02:00
Peter Rajnoha
fc65269d68 lvmconfig: add supporting code for handling deprecated settings
This patch adds supporting code for handling deprecated settings.

Deprecated settings are not displayed by default in lvmconfig output
(except for --type current and --type diff). There's a new
"--showdeprecated" lvmconfig option to display them if needed.

Also, when using lvmconfig --withcomments, the comments with info
about deprecation are displayed for deprecated settings and with
lvmconfig --withversions, the version in which the setting was
deprecated is displayed in addition to the version of introduction.

If using --atversion with a version that is lower than the one
in which the setting was deprecated, the setting is then considered
as not deprecated (simply because at that version it was not
deprecated).

For example:

$ lvmconfig --type default activation
activation {
        ...
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated
activation {
        ...
	mirror_region_size=512
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated --withversions
activation {
        ...
	# Available since version 1.0.0.
	# Deprecated since version 2.2.99.
	mirror_region_size=512
	# Available since version 2.2.99.
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated --withcomments
activation {
        ...
	# Configuration option activation/mirror_region_size.
	# This has been replaced by the activation/raid_region_size
	# setting.
	# Size (in KB) of each copy operation when mirroring.
	# This configuration option is deprecated.
	mirror_region_size=512

	# Configuration option activation/raid_region_size.
	# Size in KiB of each raid or mirror synchronization region.
	# For raid or mirror segment types, this is the amount of
	# data that is copied at once when initializing, or moved
	# at once by pvmove.
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --withcomments --atversion 2.2.98
activation {
       ...
       # Configuration option activation/mirror_region_size.
       # Size (in KB) of each copy operation when mirroring.
       mirror_region_size=512
       ...
}
2015-04-30 17:55:04 +02:00
Peter Rajnoha
b769183a98 config: preparation for marking configuration nodes as deprecated
A preparatory code for marking configuration nodes as deprecated:
  - struct cfg_def_item gains 2 new fields ("deprecated_since_version" and "deprecation_comment"
  - cfg* macros to handle new fields
  - related config_settings.h edits to add new fields for each item (null for all at the moment)

Patch with implementation will follow...
2015-04-30 15:39:34 +02:00
Peter Rajnoha
d2c2718c11 lvmconfig: allow --withversions alone with --type list
Before this patch:

$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]

$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad

With this patch applied:

$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]

$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad - [2.2.93]
2015-04-30 14:18:14 +02:00
Peter Rajnoha
4388ab477c lvmconfig: comment out settings with proper space/tab prefix
We're commenting out settings with undefined default values.
The comment character '#' was printed at the very beginning of
the line, it should be placed just at the beginning of the setting,
after the space/tab prefix is printed.

Before this patch:

  $ lvmconfig --type default activation
  activation {
           ...
  #        volume_list=[]
           ...
  }

With this patch applied:

  $ lvmconfig --type default activation
  activation {
           ...
           # volume_list=[]
           ...
  }
2015-04-30 14:06:55 +02:00
Peter Rajnoha
8b6b90b073 config: consolidate CFG_UNSUPPORTED and CFG_ADVANCED settings
These settings are in the "unsupported" group:

devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id

These settings are in the "advanced" group:

devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs

Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).

By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
2015-04-29 16:31:47 +02:00
Peter Rajnoha
3be3eb2995 lvmconfig: add --type list and -l|--list
lvmconfig --type list displays plain list of configuration settings.
Some of the existing decorations can be used (--withsummary and
--withversions) as well as existing options/switches (--ignoreadvanced,
--ignoreunsupported, --ignorelocal, --atversion).

For example (displaying only "config" section so the list is not long):

$lvmconfig --type list config
config/checks
config/abort_on_errors
config/profile_dir

$ lvmconfig --type list --withsummary config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.

$ lvmconfig -l config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.

$ lvmconfig --type list --withsummary --withversions config
config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99]
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99]
config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99]

Example with --atversion (displaying global section):

$ lvmconfig --type list global
global/umask
global/test
global/units
global/si_unit_consistency
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/etc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/prioritise_write_locks
global/library_dir
global/locking_library
global/abort_on_internal_errors
global/detect_internal_vg_cache_corruption
global/metadata_read_only
global/mirror_segtype_default
global/raid10_segtype_default
global/sparse_segtype_default
global/lvdisplay_shows_full_device_path
global/use_lvmetad
global/thin_check_executable
global/thin_dump_executable
global/thin_repair_executable
global/thin_check_options
global/thin_repair_options
global/thin_disabled_features
global/cache_check_executable
global/cache_dump_executable
global/cache_repair_executable
global/cache_check_options
global/cache_repair_options
global/system_id_source
global/system_id_file

$ lvmconfig --type list global --atversion 2.2.50
global/umask
global/test
global/units
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/library_dir
global/locking_library
2015-04-29 11:58:14 +02:00
Peter Rajnoha
0ba332e82a refactor: dumpconfig: keep --withcomments to display full comment and use --withsummary for one line summary 2015-04-29 11:14:18 +02:00
Peter Rajnoha
ae0014e2df config: also evaluate default unconfigured values in runtime for 'cfg_runtime' settings
The settings which have their default value evaluated in runtime should
have their 'unconfigured' counterparts also evaluated in runtime since
those values can be constructed by using other settings.

For example, before this patch:

$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="/etc/lvm/cache/.cache

With this patch applied:

$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@/.cache"
2015-04-28 15:36:35 +02:00
Peter Rajnoha
afcf472464 config: make it possible to set default unconfigured_value for settings of all types, not just strings
The @something@ used for unconfigured default value is not bound to
CFG_TYPE_STRING settings defined in config_settings.h, it can be
used for any other config type too.
2015-04-28 15:32:38 +02:00
Peter Rajnoha
de6deec3b8 refactor: rename struct cfg_def_item's 'unconfigured_path' to 'unconfigured_value'
It's not only path that can be used for setting's default value
in unconfigured form as @something@.
2015-04-28 15:30:48 +02:00
David Teigland
9b86e8e8f4 dumpconfig: add --ignorelocal
When generating a sample lvm.conf file, we don't want to
include the "local" section, which is kept in lvmlocal.conf.
2015-04-21 14:55:03 -05:00
David Teigland
5cd6381717 dumpconfig: add --unconfigured option
Using this option, default string values that are
configurable are printed as unconfigured values,
e.g. "@CONFDIR@" instead of "/etc".
2015-04-17 11:35:34 -05:00
David Teigland
5f6ac1c812 dumpconfig: add --withfullcomments option
--withfullcomments prints all comment lines for each config option.
--withcomments prints only the first comment line, which should be
a short one-line summary of the option.
2015-04-15 10:56:42 -05:00
David Teigland
6f3f421228 config: include full comments
Comments from the sample config files are copied into
the comment field of the config settings structure.
This includes only minimal changes to the text.

With this in place, the sample config files can
be generated from 'lvm dumpconfig', and content
for an lvm.conf man page can also be generated.
2015-04-09 15:35:28 -05:00
Alasdair G Kergon
6407d184d1 cache: Store metadata size and checksum.
Refactor the recent metadata-reading optimisation patches.

Remove the recently-added cache fields from struct labeller
and struct format_instance.

Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.

Allow this VG summary information to be looked up by metadata size +
checksum.  Adjust the debug log messages to make it clear when this
shortcut has been successful.

(This changes the optimisation slightly, and might be extendable
further.)

Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
2015-03-18 23:43:02 +00:00
Zdenek Kabelac
1260b86b2b config: use timestamp with nanosecond precision
Since kernel 2.6 we can use more precise timestamping,
so e.g. we could better recognize configs are slightly
older then generated .cache file.
2015-03-18 13:42:56 +01:00
Zdenek Kabelac
7e7411966a lib: avoid reparsing same metadata
When reading VG mda from multiple PVs - do all the validation only
when mda is seen for the first time and  when mda checksum and length
is same just return already existing VG pointer.

(i.e. using 300PVs for a VG would lead to create and destroy 300 config trees....)
2015-03-06 13:53:12 +01:00
Peter Rajnoha
67c52a4453 config: add CFG_DISABLED flag and mark system_id settings with that flag
If configuration setting is marked in config_setting.h with CFG_DISABLED
flag, default value is always used for such setting, no matter if it's defined
by user (in --config/lvm.conf/lvmlocal.conf).

A warning message is displayed if this happens:

For example:

[1] f21/~ # lvm dumpconfig --validate
  WARNING: Configuration setting global/system_id_source is disabled. Using default value.
  LVM configuration valid.

[1] f21/~ # pvs
  WARNING: Configuration setting global/system_id_source is disabled. Using default value.
  PV         VG     Fmt  Attr PSize   PFree
  /dev/sdb          lvm2 ---  128.00m 128.00m
  ...
2015-03-04 14:08:47 +01:00
Alasdair G Kergon
2a1189ebc3 config: Reinstate recursive tags setting.
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it.  "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
2015-02-23 17:40:58 +00:00
Peter Rajnoha
bea003e94c config: improve config validation to check if setting with string value can be empty.
For example, with dmeventd/executable set to "" which is not allowed for
this setting, the config validation now ends up with:

$ lvm dumpconfig --validate
  Configuration setting "dmeventd/executable" invalid. It cannot be set to an empty value.
  LVM configuration invalid.

This check for empty values for string config settings was not
done before (we only checked empty arrays, but not scalar strings).
2015-01-21 16:44:02 +01:00
Zdenek Kabelac
e5356eeba1 cleanup: never return uninitialized buffer
Coverity noticed this function may return untouched buffer,
however in this state can't really happen, but anyway
ensure on error path the buffer will have zero lenght string.
2014-08-26 14:13:06 +02:00
Zdenek Kabelac
894eda4707 thin and cache: unify pool common code
Fix get_pool_params to only read params.
Add poolmetadataspare option to get_pool_params.
Move all profile code into update_pool_params.
Move recalculate code into pool_manip.c
2014-07-22 22:41:38 +02:00
Zdenek Kabelac
86e116450e cleanup: drop unneeded initialization
Code assigns this variable right after clearing.
2014-07-04 12:31:17 +02:00
Peter Rajnoha
3208396ce5 coverity: fix issues reported by coverity 2014-06-24 14:58:53 +02:00
Peter Rajnoha
9c937e7d54 dumpconfig: add --type profilable-command/profilable-metadata, --metadataprofile/--commandprofile
The dumpconfig now understands --commandprofile/--profile/--metadataprofile

The --commandprofile and --profile functionality is almost the same
with only one difference and that is that the --profile is just used
for dumping the content, it's not applied for the command itself
(while the --commandprofile profile is applied like it is done for
any other LVM command).

We also allow --metadataprofile for dumpconfig - dumpconfig *does not*
touch VG/LV and metadata in any way so it's OK to use it here (just for
dumping the content, checking the profile validity etc.).

The validity of the profile can be checked with:
      dumpconfig --commandprofile/--profile/--metadataprofile --validate

...depending on the profile type.

Also, mention --config in the dumpconfig help string so users know
that  dumpconfig handles this too (it did even before, but it was not
documented in the help string).
2014-05-20 16:27:07 +02:00
Peter Rajnoha
9e3e4d6994 config: differentiate command and metadata profiles and consolidate profile handling code
- When defining configuration source, the code now uses separate
  CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
  (before, it was just CONFIG_PROFILE that did not make the
  difference between the two). This helps when checking the
  configuration if it contains correct set of options which
  are all in either command-profilable or metadata-profilable
  group without mixing these groups together - so it's a firm
  distinction. The "command profile" can't contain
  "metadata profile" and vice versa! This is strictly checked
  and if the settings are mixed, such profile is rejected and
  it's not used. So in the end, the CONFIG_PROFILE_COMMAND
  set of options and CONFIG_PROFILE_METADATA are mutually exclusive
  sets.

- Marking configuration with one or the other marker will also
  determine the way these configuration sources are positioned
  in the configuration cascade which is now:

  CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES

- Marking configuration with one or the other marker will also make
  it possible to issue a command context refresh (will be probably
  a part of a future patch) if needed for settings in global profile
  set. For settings in metadata profile set this is impossible since
  we can't refresh cmd context in the middle of reading VG/LV metadata
  and for each VG/LV separately because each VG/LV can have a different
  metadata profile assinged and it's not possible to change these
  settings at this level.

- When command profile is incorrect, it's rejected *and also* the
  command exits immediately - the profile *must* be correct for the
  command that was run with a profile to be executed. Before this
  patch, when the profile was found incorrect, there was just the
  warning message and the command continued without profile applied.
  But it's more correct to exit immediately in this case.

- When metadata profile is incorrect, we reject it during command
  runtime (as we know the profile name from metadata and not early
  from command line as it is in case of command profiles) and we
  *do continue* with the command as we're in the middle of operation.
  Also, the metadata profile is applied directly and on the fly on
  find_config_tree_* fn call and even if the metadata profile is
  found incorrect, we still need to return the non-profiled value
  as found in the other configuration provided or default value.
  To exit immediately even in this case, we'd need to refactor
  existing find_config_tree_* fns so they can return error. Currently,
  these fns return only config values (which end up with default
  values in the end if the config is not found).

- To check the profile validity before use to be sure it's correct,
  one can use :

    lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate

  (the --commandprofile/--metadataprofile for dumpconfig will come
   as part of the subsequent patch)

- This patch also adds a reference to --commandprofile and
  --metadataprofile in the cmd help string (which was missing before
  for the --profile for some commands). We do not mention --profile
  now as people should use --commandprofile or --metadataprofile
  directly. However, the --profile is still supported for backward
  compatibility and it's translated as:

    --profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
                 (as these commands are able to attach profile to metadata)

    --profile == --commandprofile for all the other commands
                (--metadataprofile is not allowed there as it makes no sense)

- This patch also contains some cleanups to make the code handling
  the profiles more readable...
2014-05-20 16:21:48 +02:00
Peter Rajnoha
c42f72867a config: attach cft_check_handle to each config tree instead of global cmd_context
Before, the cft_check_handle used to direct configuration checking
was part of cmd_context. It's better to attach this as part of the
exact config tree against which the check is done. This patch moves
the cft_check_handle out of cmd_context and it attaches it to the
config tree directly as dm_config_tree->custom->config_source->check_handle.

This change makes it easier to track the config tree check results
and provides less space for bugs as the results are directly attached
to the tree and we don't need to be cautious whether the global value
is correct or not (and whether it needs reinitialization) as it was
in the case when the cft_check_handle was part of cmd_context.
2014-05-19 15:38:04 +02:00
Peter Rajnoha
ff9d27a1c7 config: add CONFIG_FILE_SPECIAL config source id
Add CONFIG_FILE_SPECIAL config source id to make a difference between
real configuration tree (like lvm.conf and tag configs) and special purpose
configuration tree (like LVM metadata, persistent filter).

This makes it easier to attach correct customized data to the config
tree that is created out of the source then.
2014-05-19 15:37:41 +02:00
Zdenek Kabelac
85cf5a23d2 cleanup: improve error message
Update impossile to happen error message.
2014-05-13 10:33:17 +02:00
Zdenek Kabelac
a8042f33d0 coverity: check for profile
Ensure str is not NULL for analyzer.
2014-05-07 14:15:52 +02:00
Peter Rajnoha
4e47c34ffc config: also check empty arrays for difference against default values 2014-03-24 16:30:47 +01:00
Peter Rajnoha
5dcec1734e dumpconfig: add dumpconfig --type diff to show differences from defaults 2014-03-24 15:35:54 +01:00