1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

1193 Commits

Author SHA1 Message Date
Jonathan Brassow
5555d2a000 RAID: Fix segfault when attempting to replace RAID 4/5/6 device
Commit 8767435ef8 allowed RAID 4/5/6
LV to be extended properly, but introduced a regression in device
replacement - a critical component of fault tolerance.

When only 1 or 2 drives are being replaced, the 'area_count' needed
can be equal to the parity_count.  The 'area_multiple' for RAID 4/5/6
was computed as 'area_count - parity_devs', which could result in
'area_multiple' being 0.  This would ultimately lead to a division by
zero error.  Therefore, in calc_area_multiple, it is important to take
into account the number of areas that are being requested - just as
we already do in _alloc_init.
2012-07-24 19:02:06 -05:00
Zdenek Kabelac
ebbf7d8e68 thin: add discard support for thin pool
Add arg support for discard.
Add discard ignore, nopassdown, passdown (=default) support.
Flags could be set per pool.

lvcreate [--discard {ignore|no_passdown|passdown}]  vg/thinlv
2012-07-18 14:36:57 +02:00
Jonathan Brassow
8767435ef8 RAID: Fix extending size of RAID 4/5/6 logical volumes.
Reducing a RAID 4/5/6 LV or extending it with a different number of
stripes is still not implemented.  This patch covers the "simple" case
where the LV is extended with the same number of stripes as the orginal.
2012-06-26 09:44:54 -05:00
Alasdair G Kergon
2cec4b4a77 alloc: fix raid --alloc anywhere double allocs
If _alloc_parallel_area for raid devices chooses an area already used
up, it doesn't notice that it has no space left in it and leaves
later code trying to place a zero-length area into the LV.

https://bugzilla.redhat.com/832596
2012-06-28 23:26:42 +01:00
Peter Rajnoha
a2f4ccd839 lvcreate: add --activate ay (autoactivate)
One can use "lvcreate --aay" to have the newly created volume
activated or not activated based on the activation/auto_activation_volume_list
this way.

Note: -Z/--zero is not compatible with -aay, zeroing is not used in this case!
When using lvcreate -aay, a default warning message is also issued that zeroing
is not done.
2012-06-28 09:44:07 -04:00
Peter Rajnoha
95ced7a7be activate: add autoactivation hooks
Define an 'activation_handler' that gets called automatically on
PV appearance/disappearance while processing the lvmetad_pv_found
and lvmetad_pv_gone functions that are supposed to update the
lvmetad state based on PV availability state. For now, the actual
support is for PV appearance only, leaving room for PV disappearance
support as well (which is a more complex problem to solve as this
needs to count with possible device stack).

Add a new activation change mode - CHANGE_AAY exposed as
'--activate ay/-aay' argument ('activate automatically').

Factor out the vgchange activation functionality for use in other
tools (like pvscan...).
2012-06-28 09:42:47 -04:00
Peter Rajnoha
2729720fd3 args: add --activate synonym for --available arg
We're refererring to 'activation' all over the code and we're talking
about 'LVs being activated' all the time so let's use 'activation/activate'
everywhere for clarity and consistency (still providing the old
'available' keyword as a synonym for backward compatibility with
existing environments).
2012-06-28 09:42:44 -04:00
Alasdair G Kergon
07a25c249b discards: don't discard reconfigured extents
Update release_lv_segment_area not to discard any PV extents,
as it also gets used when moving extents between LVs.
Instead, call a new function release_and_discard_lv_segment_area() in
the two places where data should be discarded - lv_reduce() and
remove_mirrors_from_segments().
2012-06-27 22:12:01 +01:00
Alasdair G Kergon
e59f6981e6 discards: split discard from release_pv_segment
Separate discard_pv_segment out of release_pv_segment
2012-06-27 22:11:54 +01:00
Alasdair G Kergon
a5ddb347e5 allocation: allow release_lv_segment_area to fail
Allow release_lv_segment_area to fail as functions it calls can fail.
2012-06-27 22:11:49 +01:00
Zdenek Kabelac
6f3cd63551 cleanup: replace memset with struct initilization
Simplifies the code, properly detects too long socket paths,
drops unused parameter.
2012-06-22 13:23:03 +02:00
Alasdair Kergon
e0ed1b458d Warn of deadlock risk when using snapshots of mirror segment type. 2012-05-14 16:18:57 +00:00
Alasdair Kergon
8b59522d67 Fix cling policy not to behave like normal policy if no previous LV seg.
Fix alloc cling to cling to PVs already found with contiguous policy.
2012-05-11 22:53:13 +00:00
Alasdair Kergon
8a689fd04d Fix allocation policy loop so it doesn't continue beyond cling using later
policies it shouldn't be using when --alloc cling is specified but no tags
are defined.
2012-05-11 22:19:12 +00:00
Alasdair Kergon
01cfbe14f1 Append _TO_LVSEG to names of internal A_CONTIGUOUS and A_CLING flags.
Remove some unnecesary prev_lvseg checks.
2012-05-11 18:59:01 +00:00
Alasdair Kergon
51514ae62f Always include debug mesg when cling to allocated is set. 2012-05-11 15:32:19 +00:00
Alasdair Kergon
086829459b Refactor _has_matching_pv_tag to provide a fn that takes PV structs. 2012-05-11 15:26:30 +00:00
Peter Rajnoha
81c215de54 More comments on metadata area types. 2012-05-10 11:03:07 +00:00
Peter Rajnoha
8c3e4b43f1 Comment on auxiliary metadata areas. 2012-05-10 10:37:49 +00:00
Zdenek Kabelac
98f2e3d974 Fix regression in for_each_sub_lv
pool_lv is not a sub lv in terms for this function.
It has caused problem with renaming thin_volume, where it has tried to
rename pool LV as well.
2012-05-09 12:12:21 +00:00
Jonathan Earl Brassow
eb2d70293d Fix up-convert when mirror activation is controled by volume_list and tags.
When mirrors are up-converted, a transient mirror layer is put in so that
only the new devices are sync'ed.  That transient layer must carry the tags
of the original mirror LV, otherwise it will fail to activate when activation
is regulated by lvm.conf:activation/volume_list.  The conversion would then
fail.

The fix is to do exactly the same thing that is being done for linear ->
mirror converting (lib/metadata/mirror.c:_init_mirror_log()).  We copy the
tags temporarily for the new LV and remove them after the activation.
2012-05-05 02:08:46 +00:00
Jonathan Earl Brassow
1e4e9548b1 Disallow snapshots of mirror segment types.
Snapshots of RAID logical volumes are allowed (including "raid1").  However,
snapshots of "mirror" logical volumes has been disallowed due to unsolvable
issues inherent to the design.  The fact that mirroring (dm-raid1.c) must
stop all I/O as the result of a failure and wait for userspace intervention
can lead to a circular dependency if userspace is simultaneously waiting for
snapshots (on mirrors) to make an I/O update before proceeding.

Various snapshot on mirror tests have been removed as a result.
2012-05-01 19:21:24 +00:00
Jonathan Earl Brassow
ac6e1e3e8d Disallow changing cluster attribute of VG while RAID LVs are active.
Mirror and snapshot LVs are already checked for when switching the cluster
attribute of a VG.  This patch adds RAID.
2012-04-25 13:38:41 +00:00
Jonathan Earl Brassow
dfd024d3a8 Allow a subset of failed devices to be replaced in RAID LVs.
If two devices in an array failed, it was previously impossible to replace
just one of them.  This patch allows for the replacement of some, but perhaps
not all, failed devices.
2012-04-24 20:05:31 +00:00
Jonathan Earl Brassow
a7feae8a6e Fix code that performs RAID device replacement while under snapshot.
The code should have been calling [suspend|resume]_lv_origin() rather than
[suspend|resume]_lv.

This addresses bug 807069.
2012-04-12 03:16:37 +00:00
Jonathan Earl Brassow
187486c7bb Fix inability to split RAID1 image while specifying a particular PV.
The logic for resuming the original and newly split LVs was not properly
done to handle situations where anything but the last device in the array
was split.  It did not take into account the possible name collisions that
might occur when the original LV undergoes the shifting and renaming of its
sub-LVs.
2012-04-11 14:20:19 +00:00
Jonathan Earl Brassow
c0b5886f18 RAID LVs could not handle a down-convert if a device other than the last one
in the array was specified for removal.  This change addresses that (bz806111).
2012-04-11 01:23:29 +00:00
Zdenek Kabelac
8a81716325 Minor fixes
Just small updates and remove <backtrace> after log_error.
2012-03-28 11:11:25 +00:00
Milan Broz
7076d1439b Fix pvmove if LV is activated exclusively but cmirror is not running.
In this case we should allow to use local mirror, check for cmirror
should apply only for lvconvert/lvcreate.

Introduced in 2.02.86 by removing !(lv->status & ACTIVATE_EXCL).

(Partially workaround, it is minimalistic patch for now.)
2012-03-23 16:28:40 +00:00
Zdenek Kabelac
2caa558e7c Update and fix monitoring of thin pool devices
Code adds better support for monitoring of thin pool devices.
update_pool_lv uses DMEVENTD_MONITOR_IGNORE to not manipulate with monitoring.
vgchange & lvchange are checking real thin pool device for existance
as we are using   _tpool  real device and visible LV pool device might not
be even active (_tpool is activated implicitely for any thin volume).
monitor_dev_for_events is another _lv_postorder like code it might be worth
to think about reusing it here - for now update the code to properly
monitory thin volume deps.
For unmonitoring add extra code to check the usage of thin pool - in case it's in use
unmonitoring of thin volume is skipped.
2012-03-23 09:58:04 +00:00
Jonathan Earl Brassow
dc7b1640ed Fix name conflicts that prevent down-converting RAID1 when specifying a device
When down-converting a RAID1 device, it is the last device that is extracted
and removed when the user does not specify a particular device.  However,
when a device is specified (and it is not the last), the device is removed and
the remaining sub-LVs are "shifted down" to fill the hole.  This cause problems
when resuming the LV because if the shifted devices were resumed (and thus
renamed) before the sub-LV being extracted, there would be a name conflict.
The solution is to resume the extracted sub-LVs first so that they can be
properly renamed preventing a possible conflict.

This addresses bug 801967.
2012-03-15 20:00:54 +00:00
Zdenek Kabelac
0f2bbb8763 Removing call of release_vg(NULL)
Since we are in error path were vg must be always NULL,
skip call of release_vg() like we do in other places.
2012-03-12 14:43:12 +00:00
Zdenek Kabelac
e19271418c Using %u modifier to print unsigned values. 2012-03-12 14:41:42 +00:00
Zdenek Kabelac
aa9ebf4494 Switch to normal log_verbose message
Here it's not an error case - so do not push this message to stderr.
2012-03-12 14:18:28 +00:00
Zdenek Kabelac
aeaec150c0 Some more missing supposedly 64bit operations.
Avoid use 32bit math for extent_size.
2012-03-05 15:05:24 +00:00
Zdenek Kabelac
20c40a0807 Use 64bit math
Prevent 32bit overflow and resulting weird error reports when working
with TB sizes..
2012-03-05 14:12:57 +00:00
Zdenek Kabelac
01c62d8f9d Just make error message more clear
Make more obvious, the origin LV for snapshot must be active.
2012-03-04 15:57:27 +00:00
Alasdair Kergon
9c159ea320 Pass struct device around internally rather than dev_t.
Add 3rd daemon return state "unknown" for lookups that are carried out
successfully but don't find the item requested.
Avoid issuing error messages when it's expected that a device that's
being looked up in lvmetad might not be there.
2012-03-02 20:46:36 +00:00
Alasdair Kergon
d742cdf327 Change pvscan --lvmetad to pvscan --cache. 2012-03-02 18:09:46 +00:00
Zdenek Kabelac
6a5706a3a5 Remove support for TRIM message
It's been unsupporte for now - and it's not going to be
implemented for thin pool kernel driver - so dropping
appearence of TRIM from libdm and lvm.
2012-03-02 13:26:08 +00:00
Zdenek Kabelac
52f76a7682 Test alloc fail 2012-03-01 21:49:32 +00:00
Zdenek Kabelac
f874903a35 Add stack trace for lv_reduce
Use common code call with stack trace.

TODO: maybe the release_lv_segment_area()
should be actually able to return error code to upper level.
2012-03-01 10:09:36 +00:00
Zdenek Kabelac
2455ce226d Fix leak of FID structure 2012-03-01 09:46:38 +00:00
Zdenek Kabelac
24ab6328f7 Wipe initial 4KiB for non-zeroed thin volumes
If the thin pool has disabled zeroing  (created with -Zn), we at least
clear initial 4KiB of such thin volume (provisions 1st block).

If lvcreate is executed with '-an' command will abort (same way like we for
normal LV - however for normal LV option -Zn may skip clearing completely,
for thin volumes this option is not supported (applies only for pools).
2012-02-29 22:08:57 +00:00
Alasdair Kergon
5b613cff97 Pass 'single_device' parameter down to suppress 'Can't find uuid' messages
when reading VG text metadate and called from pvscan --lvmetad.

(Longer-term, that check needs moving outside of that code.)
2012-02-29 02:35:35 +00:00
Petr Rockai
996fe0a836 Fix a whitespace bug in the last checkin. 2012-02-29 00:19:14 +00:00
Petr Rockai
059e87ce7b Attempt a fix for lvm shell accumulating copies of orphan PVs with each "pvs"
invocation.
2012-02-29 00:18:27 +00:00
Zdenek Kabelac
0650d875e8 Test dm_hash_insert() failures mem failures 2012-02-28 11:12:58 +00:00
Zdenek Kabelac
58afa3e7fb Check error from _lv_each_dependency
_lv_mark_if_partial_collect cannot fail, however it's good to keep
checking here as we do in all other cases.
2012-02-28 11:10:45 +00:00
Zdenek Kabelac
a46cc72fd2 Add some stack traces for dev_close error paths 2012-02-28 10:11:35 +00:00