IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Reconnect to lvmetad if either the send fails (e.g. lvmetad
was restarted since lvmlockd last connected), or if no
lvmetad connection exists (e.g. lvmetad was started after
lvmlockd so no previous connection existed.)
Previously, vgcfgrestore would attempt to vg_remove the
existing VG from lvmetad and then vg_update to add the
restored VG. But, if there was a failure in the command
or with vg_update, the lvmetad cache would be left incorrect.
Now, disable lvmetad before the restore begins, and then
rescan to populate lvmetad from disk after restore has
written the new VG to disk.
We were initially looking to see if an LV was hidden and if it was we were
creating an instance of a LvCommon object to represent it. Thus if we
had a hidden cache pool for example we were missing the methods and
properties for the cache pool. However, when we create the object path,
any hidden LVs, regardless of type/functionality will be placed in the
hidden path.
The object manager method get_object_by_lvm_id was used in many cases for
the sole reason of getting the object path for the object. Instead of
retrieving the object and then calling 'dbus_object_path' on the object, we
are adding a method which returns the object path.
When we are processing the LVs we need to build up dbus objects from least
dependent to most dependent, so that we have information available when
constructing.
If a command gets stuck during an lvmetad update, lvmetad
will cancel that update after the timeout. The next command
to check the lvmetad will see that lvmetad needs to be
populated because lvmetad will return token of "none" after
a timed out update (same as when lvmetad is not populated
at all after starting.)
If a command gets an error during an lvmetad update, it
will now just quit and leave its updating token in place.
That update will be cancelled after the timeout.
All the variables for sscanf in lvmlockctl.c and lvmlockd-sanlock.c are
zeroed before sscanf call so the failure is detected by seeing the zero
value instead of proper one in subsequent code - so use (void) for
sscanf calls to ignore return value here.
If a command begins repopulating the lvmetad cache,
and fails part way through, it should set the disabled
state in lvmetad so other commands don't use bad data.
If a subsequent scan succeeds, the disabled state is
cleared.
When duplicate PVs are detected, set the disabled
flag so that commands will disable use of lvmetad.
This duplicate detection is done by lvmetad itself
when it's told about a single new PV with a PVID
that matches an existing PV on another device.
(This is different from the case where the command
is scanning all devices and detects the duplicate.)
Remove the "altdev" logic that attempted to keep
track of multiple devices for a single PV. It
is no longer used since lvmetad is disabled in
this case.
A global flag in lvmetad indicates it has been disabled.
Other flags indicate the reason it was disabled.
These flags can be queried using get_global_info.
The lvmetactl debugging utility can set and clear the
disabled flag in lvmetad. Nothing else sets the
disabled flag yet.
Commands will check these flags after connecting to
lvmetad. If the disabled flag is set, the command
will not use the lvmetad cache, but revert to disk
scanning.
To test this feature:
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 0
disable_reason = "none"
token = "filter:3041577944"
$ vgs
(should report VGs from lvmetad)
$ lvmetactl set_global_disable 1
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 1
disable_reason = "DIRECT"
token = "filter:3041577944"
$ vgs
WARNING: Not using lvmetad because the disable flag was set directly.
(should report VGs without contacting lvmetad)
$ lvmetactl set_global_disable 0
$ vgs
(should report VGs from lvmetad)
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
To help out with debug, when an exception is thrown in the dbus service we
will dump all the information we have on the last 16 commands that were
executed along with the stack strace.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
While running on F24 a number of warnings were being emitted from using the
deprecated GObject instead of GLib. Tested on python 3.4 and 3.5.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Python 3.5 in F24 was throwing the following exception:
Traceback (most recent call last):
File "/usr/lib/python3.5/site-packages/lvmdbusd/main.py", line 73, in process_request
req.run_cmd()
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 73, in run_cmd
self.register_error(-1, st)
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 123, in register_error
self._reg_ending(None, error_rc, error)
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 115, in _reg_ending
self.cb_error(self._rc_error)
File "/usr/lib64/python3.5/site-packages/dbus/service.py", line 669, in <lambda>
keywords[error_callback] = lambda exception: _method_reply_error(connection, message, exception)
File "/usr/lib64/python3.5/site-packages/dbus/service.py", line 293, in _method_reply_error
exception))
File "/usr/lib64/python3.5/traceback.py", line 136, in format_exception_only
return list(TracebackException(etype, value, None).format_exception_only())
File "/usr/lib64/python3.5/traceback.py", line 442, in __init__
if (exc_value and exc_value.__cause__ is not None
AttributeError: 'str' object has no attribute '__cause__'
This was caused because we were calling the dbus error callback with a
string instead of an actual exception. On python 3.4 this was apparently
OK, but not with 3.5. Corrected to pass the exception to error callback.
Change tested on both python 3.4 and 3.5.
Reported-by: Vratislav Podzimek <vpodzime@redhat.com>
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When we use udev or have lvm call back into the dbus service when a
change occurs, even if that change originated from the dbus service
we end up refreshing the state of the system twice which is not
needed or wanted. This change handles this case by removing any
pending refreshes in the worker queue if the state of the system
was just updated.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Use #define instead, since we do not require actually buffer needs
to exists to eliminated new gcc6 warning:
clvm.h:53:19: warning: ‘CLVMD_SOCKNAME’ defined but not used
[-Wunused-const-variable]
export LVMDBUSD_SESSION=True to run on the session bus instead
of the system bus so that we can run the unit test without
installing the dbus conf file.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
It appears that the output of lvconvert --merge can vary some. The code
was blowing up as it was trying to parse a line of stdout to retrieve the
% complete, but the line did not have the needed format and an execption
was thrown. The uncaught exception caused the background thread to exit
without updating the job object, which caused the client to hang forever
waiting. Added a default exception handler to prevent unhandled execptions
causing hangs and removed the parameter skip_first_line as it's no longer
needed. The code checks to see if the line can be parsed before doing so.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
After the lockspace has been successfully removed,
invalidate the name field in the lockspace struct.
The struct remains on the list of lockspaces until
the struct can be freed later. Until the struct is
freed, its name will prevent another new lockspace
from being created with the same name.
